Team:Calgary/Project/DataPage

From 2012.igem.org

(Difference between revisions)
 
(67 intermediate revisions not shown)
Line 14: Line 14:
a.orange{
a.orange{
color: #FF7A00 !important;
color: #FF7A00 !important;
 +
}
 +
a.purple{
 +
color: #C5B !important;
}
}
Line 23: Line 26:
 +
<a name="top"></a>
-
</html>[[File:UCalgary2012_GraphicalAbstract.png|thumb|700px|center|thumb|Figure 1. The Calgary team has developed a duel system for the detection of toxic components in tailing ponds as well as the remediation of these compounds.  Tailing ponds are large bodies of water containing waste products produced from the extraction of bitumen in the oils ands.  Our biosensor involved the identification of a toxin promoter through a transposon screen.  An electrochemical detector was implemented with a multiple output system allowing for the detection of multiple compounds simultaneously.  This promoter/detector system was then complimented with the production of a biosensor prototype involving both a physical device and a software program for easy data analysis.
+
</html>[[File:UCalgary2012_GraphicalAbstract.png|thumb|700px|center|thumb|Figure 1. The Calgary team has developed a dual system for the detection of toxic components in tailing ponds and the remediation of these compounds.  Tailings ponds are large bodies of water containing waste products produced from the extraction of bitumen in the oil sands.  Our biosensor included the identification of a toxin promoter through a transposon screen.  An electrochemical detector was implemented with a multiple output system allowing for the detection of multiple compounds simultaneously.  This promoter/detector system was then complemented with the production of a biosensor prototype involving both a physical device and a software program for easy data analysis.
-
Rather than just sensing toxins in the tailings ponds, our major objective were to detoxify the tailings through the reduction of toxins such as carboxylic acids (mainly naphthenic acids) and catechol, turning them into useable hydrocarbons.  Purification of these hydrocarbons would contribute to an added economic and industrial benefit.  In order to house this system, we also aimed to design a bioreactor for our bacteria as well as optimize product output through a flux-variability based model.  Finally, in order to create higher quality hydrocarbons, we explored desulphurization and denitrogenation pathways in order to upgrade our fuel.  To do this in a safe and environmentally sound way, we designed not only structural containment mechanisms, but also genetic containment mechanisms through novel inducible ribo-killswitches.]]<html>   
+
Rather than just sensing toxins in the tailings ponds, a major objective was to detoxify the tailings through the reduction of toxins such as carboxylic acids (mainly naphthenic acids) and catechol, while turning them into usable hydrocarbons.  Purification of these hydrocarbons would contribute an added economic and industrial benefit.  We aimed to house this system by designing a bioreactor for our bacteria as well as optimize product output through a flux-variability based model.  Finally, in order to create higher quality hydrocarbons we explored desulfurization and denitrogenation pathways to upgrade our fuel.  To do this in a safe and environmentally sound manner, we built into our design structural containment, as well as genetic control mechanisms through novel inducible ribo-killswitches and an auxotropic marker.]]<html>   
 +
<a name="newparts"></a>
<h2>Characterization of new parts submitted to the Registry</h2>
<h2>Characterization of new parts submitted to the Registry</h2>
-
<ul><li><p>(<b><a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902000">BBa_K902000</a></b>) and (<b><a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902004">BBa_K902004, </a></b>): two novel hydrolase enzymes were submitted to the registry for the hydrolysis of two different sugar conjugated electroactive compounds.  Used in conjunction with the existing lacZ part in the registry (<b><a class="green"  href="http://partsregistry.org/wiki/index.php?title=Part:BBa_I732005">BBa_I732005</a></b>), this allows for the electrochemical detection of three compounds with a single electrode.  A uidA inducible generator (<b><a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_k902002">BBa_k902002,</a></b>) was submitted and characterized electrochemically.  This data can be found on our <b><a class="green" href="https://2012.igem.org/Team:Calgary/Project/FRED/Reporting">Electroreporting page</b></a>.</li>
+
<ul><li><p>(<a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902000">BBa_K902000</a>) and (<a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902004">BBa_K902004</a>): two novel hydrolase enzymes were submitted to the registry for the hydrolysis of two different sugar-conjugated electroactive compounds: PNPG and PDPG.  Used in conjunction with the existing lacZ part in the registry (<a class="green"  href="http://partsregistry.org/wiki/index.php?title=Part:BBa_I732005">BBa_I732005</a>) which hydrolyzes CPRG, this allows for the electrochemical detection of three compounds with a single electrode.  A <i>uidA</i> inducible generator (<a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902002">BBa_K902002</a>) was submitted and characterized electrochemically.  This data can be found on our <a class="green" href="https://2012.igem.org/Team:Calgary/Project/FRED/Reporting">Electroreporting</a> page.</li>
   
   
-
<li><p>(<b><a class="orange" href="http://partsregistry.org/wiki/index.php?title=BBa_K902008">BBa_K902008</a></b>),(<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902023">BBa_K902023</a></b>) and (<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902074">BBa_K902074</a></b>): three novel riboswitchs were submitted along with two associated promoters (<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902008">BBa_K902008</a></b>) and <b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902008">BBa_K902008</a></b>) and an inducible/repressible promoter (<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902065">BBa_K902065</a></b>) were submitted to the registry.  One of these riboswitches (<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902008">BBa_K902008</a></b>) was tested with GFP and a constitutive promoter using this construct, (<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902021">BBa_K902021</a></b>), with its promoter and GFP using this construct (<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902017">BBa_K902017</a></b>) and with its promoter and the S7 kill gene using this construct (<b><a href="http://partsregistry.org/wiki/index.php?title=BBa_K902018">BBa_K902018</a></b>).  This data can be found on our killswitch <b><a class="blue" href="https://2012.igem.org/Team:Calgary/Project/HumanPractices/Killswitch/Regulation">Regulation</a></b> page. </li></p>
+
<li><p>(<a class="orange" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902008">BBa_K902008</a>),(<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902023">BBa_K902023</a>) and (<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902074">BBa_K902074</a>): three novel riboswitches sensitive to magnesium, molybdenum cofactor, and manganese were submitted along with two associated promoters (<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902009">BBa_K902009</a> and <a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902073">BBa_K902073</a>) in addition to a rhamnose inducible, glucose repressible (<i>Prha</i>) promoter (<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902065">BBa_K902065</a>).</li></p>
-
<li><p>Genes for denitrogenation and desulphurization were biobricked and submitted.  A novel oxidoreductase part (<b><a class="blue" href="http://partsregistry.org/wiki/index.php?title=BBa_K902058">BBa_K902058</a></b>) was also submitted and characterized for use in the desulphurization project.  This data can be found on our uprading <b><a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Desulfurization">Desulfurization</a></b> page.</p></li></ul>
+
<li><p>The magnesium riboswitch (<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902008">BBa_K902008</a>) was tested with GFP and a constitutive promoter using this construct, (<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902021">BBa_K902021</a>), with its promoter and GFP using this construct (<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902017">BBa_K902017</a>) and with its promoter and the <i>S7</i> kill gene using this construct (<a href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902018">BBa_K902018</a>).  This data can be found on our killswitch <a class="orange" href="https://2012.igem.org/Team:Calgary/Project/HumanPractices/Killswitch/Regulation">Regulation</a> page. </li></p>
 +
<li><p>The <i>Prha</i> promoter was characterized via fluorescence output using a GFP composite part (<a href="orange" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902066">BBa_K902066</a>).  This promoter was additionally characterized with our S7 kill gene as a composite part (<a href="orange" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902084">BBa_K902084</a>).  This data can be found on our killswitch <a class="orange" href="https://2012.igem.org/Team:Calgary/Project/HumanPractices/Killswitch/Regulation">Regulation</a> page. </li></p></li></p>
 +
 +
<li><p>Genes for denitrogenation and desulfurization were biobricked and submitted.  The <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Denitrogenation"><i>amdA</i></a>, amidase gene <a class="blue" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902041">(BBa_K902041)</a> was biobricked and shown to be able to remove primary amides from a variety of compounds.  A novel oxidoreductase part (<a class="blue" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902058">BBa_K902058</a>)  was also submitted and its functionality characterized for use in the desulfurization project.  This data can be found on our upgrading <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Desulfurization">Desulfurization</a> page.</p></li></ul>
 +
<p><a href="#top">Back to Top</a></p>
 +
 +
<a name="existingparts"></a>
<h2>Further characterization of parts already present within the registry </h2>
<h2>Further characterization of parts already present within the registry </h2>
-
<ul><li><p>(<b><a class="blue" href="http://partsregistry.org/wiki/index.php?title=BBa_K590025">BBa_K590025</a></b>), the PetroBrick, submitted by the Washington team in 2011, was characterized for a novel function: the conversion of naphthenic acids and 2-hydroxymuconate- a catechol break-down product from from the xylE gene (<b><a class="blue" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_J33204">BBa_J33204</a></b>) into hydrocarbons.  This data can be found on both the <b><a href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Decarboxylation">decarboxylation</a></b> page and the <b><a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/CatecholDegradation">Decatecholization</a></b> page.</li>
+
<ul><li><p>The IPTG inducible lacI regulated promoter  (<a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_R0010">BBa_R0010</a>) was tested electrochemically to demonstrate its leakiness when not used in conjunction with strong expression of regulatory elements. This data can be found on our <a class="green" href="https://2012.igem.org/Team:Calgary/Project/FRED/Reporting">Electroreporting</a> page.</li>
-
<li><p> The output of (<b><a class="blue" href="http://partsregistry.org/wiki/index.php?title=BBa_K590025">BBa_K590025</a></b>) was also optimized thorugh a program we devlopped in MATLAB for the  optimization of metabolic pathways in synthetic biology metabolic networksThe program allows you to build an artificial synthetic biology network in <i>E. coli</i> and predicts substrates that should be fed to the organism to increase production of the compound.  This was characterized and validated in the wetlab with the Petrobrick. This data can be found on our <b><a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/FluxAnalysis">Flux Analysis</a></b> page.</li>
+
<li><p>A β-galactosidase (LacZ) inducible generator construct existing in the registry (<a class="green" href="http://partsregistry.org/Part:BBa_I732901">BBa_I732901</a>) was found to possess a frameshift mutation, affecting its functionalityThis part was replaced with a new circuit (<a class="green" href="http://partsregistry.org/Part:BBa_K902090">BBa_K902090</a>), which was characterized for functionality both qualitatively as well as electrochemically.   This data can be found on our <a class="green" href="https://2012.igem.org/Team:Calgary/Project/FRED/Reporting">Electroreporting</a> page.
-
<li><p> An existing <i>xylE</i> gene in the registry (<b><a class="blue" href= "http://partsregistry.org/wiki/index.php?title=BBa_J33204">BBa_J33204</a></b>) was constructed with a constitutive promoter instead of the glucose-repressible one it is available with in the registry.  This allows for increased output in media containing glucose, making it more suitable for a variety of applications such as our own.  We validated the functionality of this part which can be found on our <b><a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/CatecholDegradation">Catechol Degradation</a></b> page.</li></p>
 
-
<li><p>The IPTG inducible lacI regulated promoter  (<b><a class="green" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_R0010">BBa_R0010</a></b>) was tested electorchemically todemonstarte its leakiness when not used in conjunction with strong expression of regulatory elements. This data can be found on our <b><a class="green" href="https://2012.igem.org/Team:Calgary/Project/FRED/Reporting">Electroreporting page</b></a>.</li></ul>
+
<li><p>(<a class="blue" href="http://partsregistry.org/Part:BBa_K590025">BBa_K590025</a>), the PetroBrick, submitted by the Washington team in 2011, was characterized for a novel function: the conversion of naphthenic acids and 2-hydroxymuconate- a catechol break-down product from from the xylE gene (<a class="blue" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_J33204">BBa_J33204</a>) into hydrocarbons and potential value added products. This data can be found on both the <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Decarboxylation">Decarboxylation</a> page and the <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/CatecholDegradation">Decatecholization</a> page.  We feel that these new and meaningful applications of this part present a distinct improvement on its usefulness for other teams.</li>
 +
<li><p> The output of (<a class="blue" href="http://partsregistry.org/Part:BBa_K590025">BBa_K590025</a>) was also optimized through a program we developed in MATLAB for the  optimization of metabolic pathways in synthetic biology metabolic networks.  The program allows you to build an artificial synthetic biology network in <i>E. coli</i> and predicts substrates that should be fed to the organism to increase production of the compound.  This was characterized and validated in the wetlab with the Petrobrick. This data can be found on our <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/FluxAnalysis">Flux Analysis</a> page.</li>
 +
<li><p> An existing <i>xylE</i> gene in the registry (<a class="blue" href= "http://partsregistry.org/Part:BBa_J33204">BBa_J33204</a>) was constructed with a constitutive promoter instead of the glucose-repressible part available within the registry.  This allows for increased output in media containing glucose, making it more suitable for a variety of applications such as our own.  We validated the functionality of this part which can be found on our <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/CatecholDegradation">Decatecholization</a> page.  In addition, we documented a novel application for this part, by using it in conjunction with Washington's PetroBrick (<a class="blue" href="http://partsregistry.org/Part:BBa_K590025">BBa_K590025</a>) to degrade catechol into a further break-down product. </p></li>
 +
 +
<li><p>An <I>E. coli</i> catalase gene from the registry (<a class="blue" href= "http://partsregistry.org/Part:BBa_K137068">BBa_K137068</a>) was also tested in conjunction with a lacI inducible promoter as a new composite part (<a class="blue" href= "http://partsregistry.org/Part:BBa_K902060">BBa_K902060</a>) .  This part was characterized in TOP10 <i> E. coli</i> for its ability to allow cells to survive in higher concentrations of hydrogen peroxide.  This data can be found on our <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Desulfurization">Desulfurization</a> page. 
 +
</ul>
 +
<p><a href="#top">Back to Top</a></p>
 +
 +
 +
<a name="additionalwork"></a>
<h2>Additional Work and Characterization </h2>
<h2>Additional Work and Characterization </h2>
-
<ul><li><p>Designed and prototyped a physical bioreactor for which we obtained both qualitative and quantitaive data for its functionality.  This is outlined on our <b><a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Bioreactor">Bioreactor</a></b> page. </p></li>
+
<ul>
 +
<li><p>Developed and tested both hardware and software for a biosensor using an electrochemical sensor.  The software is available on our wiki as are the results fom the hardware.  These are on our <a class="green" href="https://2012.igem.org/Team:Calgary/Project/FRED/Prototype">Device Prototype</a> page</p></li>
 +
 
 +
<li><p> Characterized one of our constitutively expressed transposon clones to test the lacZ gene electrochemically.  In addition, one of our two 'toxin-sensing' transposon hits was characterized electrochemically, demonstrating its ability to respond to and report on NAs at levels detectable by our electrochemical reporting system.  This data can be found on our <a class="green" href="https://2012.igem.org/Team:Calgary/Project/FRED/Reporting">Electroreporting</a> and <a class="purple" href="https://2012.igem.org/Team:Calgary/Project/Synergy">Synergy</a> pages respectively. </p></li>
 +
 
 +
<li><p> Performed an actual test of our biosensor using tailings pond water, showing that we can detect toxins found in tailings.  In addition, performed an actual "field test" of our prototype to demonstrate its feasibility and ease of use outside a laboratory setting.  This data can be found on our <a class="purple" href="https://2012.igem.org/Team:Calgary/Project/Synergy">Synergy</a> page. </li></p>
 +
 
 +
<li><p> Submitted novel parts involved in decarboxylation and validated the functionality of an additional enzyme (oleT), capable of converting fatty acids into alkenes by itself.  This was done in its host organism. This data can be found in our <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Decarboxylation">Decarboxylation</a> section, however this gene has not yet been submitted due to problems cloning it.</p></li>
 +
 
 +
<li><p>Designed and prototyped a physical bioreactor for which we obtained both qualitative and quantitative data for its functionality.  This is outlined on our <a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Bioreactor">Bioreactor</a> page.  In addition, we performed an actual validation assay of our bioreactor, showing that we can use it to grow hydrocarbon producing cells and use our belt skimming device to harvest the hydrocarbons.  This data can be found on our <a class="purple" href="https://2012.igem.org/Team:Calgary/Project/Synergy">Synergy</a> page. </p></li>
-
<li><p>Developed and tested both hardware and software of a  biosensor using an electrochemical sensorThe software is available on our wiki on our biosensor  (<b>Robert can you help me flush this out a bit, or one of the engineers?</b></p></li>
+
<li><p>Characterized the biodegradation of carbazole and various sulfur-containing compounds resembling naphthenic acids in the organisms from which we got our genesThis data can be found on our (<a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Desulfurization">Desulfurization</a>) and (<a class="blue" href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Denitrogenation">Denitrogenation</a>)</p></li>
-
<li><p> Submitted novel parts involved in decarboxylation and validated an additional single gene (oleT) for functionality in its native host. This data can be found in our <b><a href="https://2012.igem.org/Team:Calgary/Project/OSCAR/Decarboxylation">decarboxylation</a></b> section, however this gene has not yet been submitted due to problems in cloning it.</p></li>
+
<li><p>Performed initial assays on a glycine knockout strain of <i>E. coli</i>, characterizing its survival in differing concentrations of glycine, its ability to work in conjunction with one of our inducible killswitch constructs  (<a href=blue href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902018">BBa_K902018</a>) and finally its ability to work with the Petrobrick, actually substantially increasing our out put of hydrocarbons when grown with glycine as compared to a <i>DH5alpha</i> strain.   This data can be found on our <a class="purple" href="https://2012.igem.org/Team:Calgary/Project/Synergy">Synergy</a> page. </li></p>
-
<li><p> Characterizedone of our constitutively expressed transposon clones to test the lacZ gene electrochemically. This data can be found on or electroreporting page.</p></li>
+
<li><p>Resubmitted (<a class="orange" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K206009">BBa_K26009</a>) an inconsistent registry composite part that we had to construct from basic parts, resubmitting as the sequence-verified (<a class="orange" href="http://partsregistry.org/wiki/index.php?title=Part:BBa_K902016">BBa_K902016</a>)</p></li>
 +
</ul>
 +
<p><a href="#top">Back to Top</a></p>
</body>
</body>

Latest revision as of 03:11, 27 October 2012

Hello! iGEM Calgary's wiki functions best with Javascript enabled, especially for mobile devices. We recommend that you enable Javascript on your device for the best wiki-viewing experience. Thanks!

Detect and Destroy: Data Page

Figure 1. The Calgary team has developed a dual system for the detection of toxic components in tailing ponds and the remediation of these compounds. Tailings ponds are large bodies of water containing waste products produced from the extraction of bitumen in the oil sands. Our biosensor included the identification of a toxin promoter through a transposon screen. An electrochemical detector was implemented with a multiple output system allowing for the detection of multiple compounds simultaneously. This promoter/detector system was then complemented with the production of a biosensor prototype involving both a physical device and a software program for easy data analysis. Rather than just sensing toxins in the tailings ponds, a major objective was to detoxify the tailings through the reduction of toxins such as carboxylic acids (mainly naphthenic acids) and catechol, while turning them into usable hydrocarbons. Purification of these hydrocarbons would contribute an added economic and industrial benefit. We aimed to house this system by designing a bioreactor for our bacteria as well as optimize product output through a flux-variability based model. Finally, in order to create higher quality hydrocarbons we explored desulfurization and denitrogenation pathways to upgrade our fuel. To do this in a safe and environmentally sound manner, we built into our design structural containment, as well as genetic control mechanisms through novel inducible ribo-killswitches and an auxotropic marker.

Characterization of new parts submitted to the Registry

  • (BBa_K902000) and (BBa_K902004): two novel hydrolase enzymes were submitted to the registry for the hydrolysis of two different sugar-conjugated electroactive compounds: PNPG and PDPG. Used in conjunction with the existing lacZ part in the registry (BBa_I732005) which hydrolyzes CPRG, this allows for the electrochemical detection of three compounds with a single electrode. A uidA inducible generator (BBa_K902002) was submitted and characterized electrochemically. This data can be found on our Electroreporting page.

  • (BBa_K902008),(BBa_K902023) and (BBa_K902074): three novel riboswitches sensitive to magnesium, molybdenum cofactor, and manganese were submitted along with two associated promoters (BBa_K902009 and BBa_K902073) in addition to a rhamnose inducible, glucose repressible (Prha) promoter (BBa_K902065).

  • The magnesium riboswitch (BBa_K902008) was tested with GFP and a constitutive promoter using this construct, (BBa_K902021), with its promoter and GFP using this construct (BBa_K902017) and with its promoter and the S7 kill gene using this construct (BBa_K902018). This data can be found on our killswitch Regulation page.

  • The Prha promoter was characterized via fluorescence output using a GFP composite part (BBa_K902066). This promoter was additionally characterized with our S7 kill gene as a composite part (BBa_K902084). This data can be found on our killswitch Regulation page.

  • Genes for denitrogenation and desulfurization were biobricked and submitted. The amdA, amidase gene (BBa_K902041) was biobricked and shown to be able to remove primary amides from a variety of compounds. A novel oxidoreductase part (BBa_K902058) was also submitted and its functionality characterized for use in the desulfurization project. This data can be found on our upgrading Desulfurization page.

Back to Top

Further characterization of parts already present within the registry

  • The IPTG inducible lacI regulated promoter (BBa_R0010) was tested electrochemically to demonstrate its leakiness when not used in conjunction with strong expression of regulatory elements. This data can be found on our Electroreporting page.

  • A β-galactosidase (LacZ) inducible generator construct existing in the registry (BBa_I732901) was found to possess a frameshift mutation, affecting its functionality. This part was replaced with a new circuit (BBa_K902090), which was characterized for functionality both qualitatively as well as electrochemically. This data can be found on our Electroreporting page.

  • (BBa_K590025), the PetroBrick, submitted by the Washington team in 2011, was characterized for a novel function: the conversion of naphthenic acids and 2-hydroxymuconate- a catechol break-down product from from the xylE gene (BBa_J33204) into hydrocarbons and potential value added products. This data can be found on both the Decarboxylation page and the Decatecholization page. We feel that these new and meaningful applications of this part present a distinct improvement on its usefulness for other teams.

  • The output of (BBa_K590025) was also optimized through a program we developed in MATLAB for the optimization of metabolic pathways in synthetic biology metabolic networks. The program allows you to build an artificial synthetic biology network in E. coli and predicts substrates that should be fed to the organism to increase production of the compound. This was characterized and validated in the wetlab with the Petrobrick. This data can be found on our Flux Analysis page.

  • An existing xylE gene in the registry (BBa_J33204) was constructed with a constitutive promoter instead of the glucose-repressible part available within the registry. This allows for increased output in media containing glucose, making it more suitable for a variety of applications such as our own. We validated the functionality of this part which can be found on our Decatecholization page. In addition, we documented a novel application for this part, by using it in conjunction with Washington's PetroBrick (BBa_K590025) to degrade catechol into a further break-down product.

  • An E. coli catalase gene from the registry (BBa_K137068) was also tested in conjunction with a lacI inducible promoter as a new composite part (BBa_K902060) . This part was characterized in TOP10 E. coli for its ability to allow cells to survive in higher concentrations of hydrogen peroxide. This data can be found on our Desulfurization page.

Back to Top

Additional Work and Characterization

  • Developed and tested both hardware and software for a biosensor using an electrochemical sensor. The software is available on our wiki as are the results fom the hardware. These are on our Device Prototype page

  • Characterized one of our constitutively expressed transposon clones to test the lacZ gene electrochemically. In addition, one of our two 'toxin-sensing' transposon hits was characterized electrochemically, demonstrating its ability to respond to and report on NAs at levels detectable by our electrochemical reporting system. This data can be found on our Electroreporting and Synergy pages respectively.

  • Performed an actual test of our biosensor using tailings pond water, showing that we can detect toxins found in tailings. In addition, performed an actual "field test" of our prototype to demonstrate its feasibility and ease of use outside a laboratory setting. This data can be found on our Synergy page.

  • Submitted novel parts involved in decarboxylation and validated the functionality of an additional enzyme (oleT), capable of converting fatty acids into alkenes by itself. This was done in its host organism. This data can be found in our Decarboxylation section, however this gene has not yet been submitted due to problems cloning it.

  • Designed and prototyped a physical bioreactor for which we obtained both qualitative and quantitative data for its functionality. This is outlined on our Bioreactor page. In addition, we performed an actual validation assay of our bioreactor, showing that we can use it to grow hydrocarbon producing cells and use our belt skimming device to harvest the hydrocarbons. This data can be found on our Synergy page.

  • Characterized the biodegradation of carbazole and various sulfur-containing compounds resembling naphthenic acids in the organisms from which we got our genes. This data can be found on our (Desulfurization) and (Denitrogenation)

  • Performed initial assays on a glycine knockout strain of E. coli, characterizing its survival in differing concentrations of glycine, its ability to work in conjunction with one of our inducible killswitch constructs (BBa_K902018) and finally its ability to work with the Petrobrick, actually substantially increasing our out put of hydrocarbons when grown with glycine as compared to a DH5alpha strain. This data can be found on our Synergy page.

  • Resubmitted (BBa_K26009) an inconsistent registry composite part that we had to construct from basic parts, resubmitting as the sequence-verified (BBa_K902016)

Back to Top