Revision as of 18:42, 26 September 2012 by Takem (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

system

mixed acid fermentation

As we stated in the background page, our H2 E.coli project aims to produce hydrogen from garbage efficiently using Escherichia coli. E.coli naturally produce hydrogen through a process called mixed acid fermentation. We thought we would be able to increase H2 production of E.coli by enhancing a specific pathway of mixed acid fermentation. Here is an overview of the mixed acid fermentation pathway of E.coli.

First, Phosphoenolpyruvate (PEP) is produced from glucose by glycolysis, which is in turn transformed into pyruvate or into oxaloacetate. These two molecules are then transformed into several products after a chain of reactions, including hydrogen. ( produced from formate in order to regulate the intracellular pH of E.coli.)[7] So, we expected to be able to increase hydrogen production by overexpressing specific genes of the mixed acid fermentation pathway, that are involved in enhancing H2 production.[2]

Here are the three main reactions which lead to hydrogen production.

• 1:The conversion of phosphoenolpyruvate into pyruvate

    Phosphoenolpyruvate + ADP + 2H+ ↔ Pyruvate + ATP

• 2:The conversion of pyruvate into formate

    Pyruvate + Coenzyme A ↔ Formate + Acetyl-CoA

• 3:The break-down of formate producing hydrogen

    Formate + H+ ↔ CO2 + H2

After we examined a lot of published research, we concluded that the most important reaction of these three reactions in order to increase H2 production is the transformation of formate into hydrogen.  

FHL complex and FhlA

Hydrogen is produced from formate by the formate hydrogenase lyase system (FHL), an intracellular membrane-bound complex, most of the components of which are produced by the hyc operon. Formate dehydrogenase H[5], encoded by fdhF, converts formate to 2H, 2e, and CO2. Hydrogenase 3 (Hyd-3)[4], encoded by hycE and hycG, is reported to synthesize molecular hydrogen from 2H and 2e. Electron transfer proteins encoded by hycBCDF, are thought to shuttle electrons between formate dehydrogenase H and Hyd-3. This complex eventually catalyzes the following reaction[6]:

Formate + H+ ↔ H2 + CO2

Here is a simplified model of that complex.

We thought that increasing production of the FHL complex is the best way to boost H2 production. However, doing so by cloning genes of the complex and overexpressing them from a plasmid seemed challenging as the complex consists of a large number of sub-units. Instead, we decided to overexpress a gene fhlA involved in transcriptionally activating genes of the FHL complex.[1] Additionally, it has been reported that the amino acid replacements E363G in FhlA increased hydrogen production six-fold, compared to native FhlA.[3] So we modified FhlA in the same way in order to further enhance H2 production.  

Material and Method

To over-express fhlA, we decided to insert it into plasmid pSB1A2 with a RBS, a lac promoter and a double terminator. We also constructed a device in which hycAp, the natural target of the FhlA protein, promotes GFP expression in order to confirm that overexpression of fhlA results in expression from the hycA promoter, without having to directly quantify the amount of H2 produced. Here is a model of the construct.

• 1.hycAp-RBS-GFP-d.term-pLac-RBS-fhlA-d.term

• 2.hycAp-RBS-GFP-d.term-pLac-RBS-fhlA(E363G)-d.term

First, we tried to clone fhlA by PCR using specific primers to the wild-type genome of E. coli.(Jm109) However, unfortunately, the fhlA gene contains an Pst1 restriction site. Therefore, we had to introduce a silent mutation in the sequence of this restriction site by Site-Directed Mutagenesis using inverse PCR. We called this fhlA with a silent mutation mutationfhlA.(mfhlA) Next, we introduced mutagenesis at the codons corresponding to the amino acid replacements E363G in mFhlA by Site-Directed Mutagenesis using inverse PCR. We named this gene mfhlA(E363G). The hycAp sequence was also obtained by PCR using specific primers and the wild-type genome of E.coli. (Jm109)

The RBS, the promoter, the double terminator and the GFP that we selected are the following.

• pLac: BBa_R0011
• RBS: BBa_B0032
• d.Term: BBa_B0014
• RBS-GFP (+LVA Tag)-Terminators: BBa_I763020

After obtaining the genes we wanted by PCR, we ligated them.

• 1. pLac-RBS-fhlA-d.term

【図】

• 2. pLac-RBS-fhlA(E363G)-d.term

【図】

Then, we inserted these into the pSB1A2 plasmid. We cultivated E.coli with the plasmid in anaerobic conditions, because the genes coding the FHL complex are expressed only under anaerobic conditions, and assayed the amount of H2 produced by using Gaschromatography(GC). We assayed the amount of H2 produced in three types of E.coli: wild type, mfhlA and mfhlA(E363G) .

Results are here(link). Full Methods of DNA work and assay are here (link).

References

• [1] TOSHINARI MAEDA and HIROAKI I. OGAWA -Metabolic Engineering and Protein Engineering for Escherichia coli to Enhance Bacterial Hydrogen Production-Journal of Environmental Biotechnology Vol. 9, No. 2, 69–74, 2009
• [2] Toshinari Maeda & Viviana Sanchez-Torres & Thomas K. Wood -Enhanced hydrogen production from glucose by metabolically engineered Escherichia coli-Appl Microbiol Biotechnol (2007) 77:879–890 – September 2007.
• [3] Viviana Sanchez-Torres,1 Toshinari Maeda,and Thomas K. Wood -Protein Engineering of the Transcriptional Activator FhlA To Enhance Hydrogen Production in Escherichia coli- APPLIED AND ENVIRONMENTAL MICROBIOLOGY, Sept. 2009, p. 5639–5646
• [4] Bagramyan K, Trchounian A (2003) Structural and functional features of formate hydrogen lyase, an enzyme of mixed-acid fermentation from Escherichia coli. Biochemistry (Mosc) 68:1159–1170
• [5] Axley MJ, Grahame DA, Stadtman TC (1990) Escherichia coli formate-hydrogen lyase. Purification and properties of the selenium-dependent formate dehydrogenase component. J Biol Chem 265:18213–18218
• [6] Woods DD (1936) Hydrogenlyases: the synthesis of formic acid by bacteria. Biochem J 30:515–527
• [7] Böck A, Sawers G (1996) Cellular and Molecular Biology. In: Neidhardt FC, Curtiss JR II, Ingraham JL, Lin ECC, Low KB, Magasanik B, Reznikoff WS, Riley M, Schaechter M, Umbarger HE (eds) Escherichia coli and Salmonella. 2nd edn. ASM Press, Washington, pp 262–282

編集の仕方

• ページ右上にあるログインリンクからログインできます。
• ログイン済みの場合は、ページ左上にカーソルを持っていけば、editから内容を編集できます。（日本語メニューの場合は「編集」）
• 新規ページを作るには、アドレスバーに作りたいページのURLを打ち込めばできます。そのページには、このテンプレートページの内容を全てコピーして貼り付け、指定がある部分を編集して自由記述すればOKです。

wikiの記法

2008年度Team:Chibaのwikiが参考になります。 そのページでもリンクされていますが、書き方は [http://ja.wikipedia.org/wiki/Help:%E3%83%9A%E3%83%BC%E3%82%B8%E3%81%AE%E7%B7%A8%E9%9B%86 Wikipedia-Help:ページの編集]準拠のようです。

見出し1

見出し2

小見出し1

リンクの例：

• ページ内リンク
  • 右のように#見出し1と書くと見出し1へのリンクが張られます。ページトップ#topと、各見出しへはこのようにしてリンクが張れます。
• Wiki内部リンク
  • 右のようにTeam:UT-Tokyo/Internal/Sandbox と書くとそのまま表示され
    
  • 右のようにSandboxへのリンクと書くと「Sandboxへのリンク」という文字列にリンクが張られます。
• Wiki外部リンク
  • 右のようにhttps://2012.igem.org/Team:UT-Tokyoと書くとそのまま表示され、
  • 右のようにUT-Tokyoのトップページと書くと「UT-Tokyoのトップページ」という文字列にリンクが張られます。
  • 右のように[1]と書くと、自動で番号のついたリンクが張られます。

画像にリンクしたい場合： media:example.jpg

段落内改行は

定義リストの定義

定義リストの説明

見出し1or子下階層ページ名1

題名1の説明
改行して説明の続き

見出し2or子階層ページ名2

説明

見出し2or子階層ページ名3

description

見出し2or子階層ページ名4

description