Team:Bielefeld-Germany/Results/Summary

From 2012.igem.org

(Difference between revisions)
(→Activity Analysis of BHAL)
Line 144: Line 144:
</div>
</div>
-
<div id="anzeige">
+
-
</html>
+
-
<h1>Laccase CotA from [http://www.dsmz.de/catalogues/details/culture/DSM-27.html ''Bacillus pumilus'' DSM 27 ( ATCC7061)]</h1>
+
-
<html>
+
-
<p class="more">
+
-
</html>
+
-
First some trials of shaking flask cultivations were made with different parameters to define the best conditions for the production of the His-tagged CotA aus [http://www.dsmz.de/catalogues/details/culture/DSM-27.html ''Bacillus pumilus'' DSM 27 ( ATCC7061)] named BPUL. Because of no measured activity in the cell lysate a purification method was established (using Ni-NTA-Histag resin). The purified BPUL could be detected by SDS-PAGE (molecular weight of 58.6&nbsp;kDa) as well as MALDI-TOF. To improve the purification strategies the length of the elution gradient was increased. The fractionated samples were also tested concerning their activity. A maximal activity of X was reached. After measuring activity of BPUL a scale up was made up to 3&nbsp;L and also up to 6&nbsp;L.
 
-
<html>
 
-
 
-
</html>
 
-
__NOTOC__
 
-
 
-
==Shaking Flask Cultivation==
 
-
<div style="text-align:justify;">
 
-
The first trials to produce the CotA-laccase from [http://www.dsmz.de/catalogues/details/culture/DSM-27.html ''Bacillus pumilus DSM 27''] (ATCC7061, named BPUL) were performed in shaking flasks with various designs (from 100&nbsp;mL<sup>-1</sup> to 1&nbsp;L flasks, with and without baffles) and under different conditions. The parameters we have changed during our screening experiments were temperature (27&nbsp;°C,30&nbsp;°C and 37&nbsp;°C), the concentration of chloramphenicol (20 to 170&nbsp;µg&nbsp;mL<sup>-1</sup>), induction strategy ([https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction] and manual induction with 0,1&nbsp;% rhamnose) and cultivation time (6 to 24&nbsp;h). Further we cultivated with and without 0,25&nbsp;mM CuCl<sub>2</sub>, to provide a sufficient amount of copper, which is needed for the active center of the laccase.  Due to the screening experiments we identified the best conditions for expression of BPUL (see below). The addition of CuCl<sub>2</sub> did not lead to better results, so it was omitted.
 
-
 
-
* flask design: shaking flask without baffles
 
-
* medium: [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction medium]
 
-
* antibiotics: 60&nbsp;µg&nbsp;mL<sup>-1</sup> chloramphenicol
 
-
* temperature: 37&nbsp;°C
 
-
* cultivation time: 12&nbsp;h
 
-
 
-
The reproducibility and repeatability of the measured data and results were investigated for the shaking flask and bioreactor cultivation.
 
-
 
-
</div>
 
-
 
-
==3&nbsp;L Fermentation ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> ==
 
-
 
-
[[File:Bielefeld2012_BPUL3LFermentation.jpg|450px|thumb|left|'''Figure 1:''' Fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> (BPUL) in [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Biostat_B_Bioreactor_.283_L.29_by_Braun Braun Biostat&nbsp;B], scale: 3&nbsp;L, [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction medium] + 60&nbsp;µg/mL chloramphenicol, 37&nbsp;°C, pH&nbsp;7, agitation on cascade to hold a pO<sub>2</sub> of 50&nbsp;%, OD<sub>600</sub> measured every 30&nbsp;minutes.]]
 
-
<p align="justify">
 
-
 
-
After the measurement of BPUL activity we made a scale-up and fermented ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> in [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Biostat_B_Bioreactor_.283_L.29_by_Braun Braun Biostat&nbsp;B] with a total volume of 3&nbsp;L. Agitation speed, pO<sub>2</sub> and OD<sub>600</sub> were determined and illustrated in figure 1. We got a long lag phase of 2&nbsp;hours due to a relatively old preculture. The cell growth caused a decrease in pO<sub>2</sub> and after 3&nbsp;hours the value fell below 50&nbsp;%, so that the agitation speed increased automatically. After 8.5&nbsp;hours the deceleration phase started and therefore the agitation speed was decreased. The maximal OD<sub>600</sub> of 3.53 was reached after 10&nbsp;hours, which means a decrease in comparison to the fermentation of ''E.&nbsp;coli'' KRX under the same conditions (OD<sub>600,max</sub> =4.86 after 8.5&nbsp;hours, time shift due to long lag phase). The cells were harvested after 11&nbsp;hours.
 
-
</p>
 
-
<br style="clear: both" />
 
-
 
-
== Purification of BPUL ==
 
-
 
-
 
-
<p align="justify">
 
-
The harvested cells were resuspended in [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibrationbuffer], mechanically lysed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#Mechanical_lysis_of_the_.28bio-reactor.29_cultivation homogenization] and centrifuged. The supernatant of the lysed cell paste was loaded on the Ni-NTA-column (15&nbsp;mL Ni-NTA resin) with a flowrate of 1&nbsp;mL min<sup>-1</sup> cm<sup>-2</sup>. The column was washed with 10&nbsp;column&nbsp;volumes (CV) Ni-NTA-equilibrationbuffer. The bound proteins were eluted by an increasing Ni-NTA-elutionbuffer gradient from 0&nbsp;% to 100&nbsp;% with a total volume of 100&nbsp;mL and the elution was collected in 10&nbsp;mL fractions. Due to the high UV-detection signal of the loaded samples and to simplify the illustration of the detected product peak only the UV-detection signal of the wash step and the elution are shown. A typical chromatogram of purified laccases is illustrated [https://static.igem.org/mediawiki/2012/4/49/Bielefeld2012_Chromatogram_examplegrafik.jpg here]. The chromatogram of the BPUL-elution is shown in figure 2:
 
-
</p>
 
-
 
-
<br style="clear: both" />
 
-
[[File:Bielefeld2012_BPUL3LChromatogramm.jpg|450px|thumb|left|'''Figure 2:''' Chromatogram of wash and elution from FLPC Ni-NTA-Histag purification of BPUL produced by 3&nbsp;L fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo>. BPUL was eluted between a process volume of 460&nbsp;mL to 480&nbsp;mL with a maximal UV-detection signal of 69 mAU]]
 
-
 
-
<p align="justify">
 
-
The chromatogram shows a remarkable widespread peak between the process volume of 460&nbsp;mL to 480&nbsp;mL with the highest UV-detection signal of 69 mAU, which can be explained by the elution of bound proteins. The corresponding fractions were analyzed by SDS-PAGE analysis. Afterwards the UV-signal increased caused by the changing imidazol concentration during the elution gradient. Between the process volume of 550 and 580&nbsp;mL there are several peaks (up to a UV-detection-signal of 980&nbsp;mAU) detectable. These results are caused by an accidental detachment in front of the UV-detector. Just to be on the safe side, the corresponding fractions were analyzed by SDS-PAGE analysis. The corresponding SDS-PAGE is shown in figure 3.
 
-
</p>
 
-
 
-
<br style="clear: both" />
 
-
 
-
==SDS-PAGES of purified BPUL==
 
-
<div style="text-align:justify;">
 
-
[[File:Bielefeld2012_0906.jpg|height={50px}|weight={400px}|thumb|left|'''Figure 3:''' SDS-PAGE of purified ''E. coli'' KRX lysate containing <partinfo>BBa_K863000</partinfo> (fermented in 3 L Biostat Braun B). The flow-through, wash and the elution fractions 7 and 8 are shown. The arrow marks the BPUL band with a molecular weight of 58.6 kDa.]]
 
-
 
-
Figure 3 shows the purified ''E. coli'' KRX with <partinfo>BBa_K863000</partinfo> lysates (fermented in 3&nbsp;L Braun Biostat B) including flow-through, wash and the elution fractions 7 and 8. These two fractions were chosen due to a remarkable peak in the chromatogram. BPUL has a molecular weight of 58.6 kDA and was marked with a red arrow. The band appears in both fractions. There are also some other non-specific bands, which could not be identified. To improve the purification the elution gradient length should be longer and slower the next time.
 
-
 
-
The appearing bands were analysed by MALDI-TOF and could be identified as CotA (BPUL).
 
-
<br style="clear: both" />
 
-
</div>
 
-
 
-
==6&nbsp;L Fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo>==
 
-
 
-
[[File:Bielefeld2012_BPUL6LFermentation.jpg|450px|thumb|left|'''Figure 4:''' Fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> (BPUL) in Bioengineering NFL22, scale: 6&nbsp;L, [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction medium] + 60&nbsp;µg&nbsp;mL<sup>-1</sup> chloramphenicol, 37&nbsp;°C, pH&nbsp;7, agitation increased when pO<sub>2</sub> was below 30&nbsp;%, OD<sub>600</sub> measured every hour. ]]
 
-
 
-
<p align="justify">
 
-
Another scale-up for ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> was made up to a final working volume of 6&nbsp;L in a Bioengineering NFL22. Agitation speed, pO<sub>2</sub> and OD<sub>600</sub> were determined and illustrated in figure 4. There was no noticeable lag phase. Agitation speed was increased up to 425&nbsp;rpm after one hour due to problems caused by the control panel. The pO<sub>2</sub> decreased until a cultivation time of 4.75&nbsp;hours. The increasing pO<sub>2</sub>-Level indicates the beginning of the deceleration phase. There is no visible break in cell growth caused by an induction of protein expression. A maximal OD<sub>600</sub> of 3.68 was reached after 8&nbsp;hours of cultivation, which is similar to the 3&nbsp;L fermentation (OD<sub>600</sub> = 3.58 after 10 hours, time shift due to long lag phase). The cells were harvested after 12&nbsp;hours.
 
-
 
-
</p>
 
-
 
-
<br style="clear: both" />
 
-
 
-
==Purification of BPUL==
 
-
 
-
<p align="justify">
 
-
The harvested cells were prepared in [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibrationbuffer], mechanically lysed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#Mechanical_lysis_of_the_.28bio-reactor.29_cultivation homogenization] and centrifuged. The supernatant of the lysed cell paste was loaded on the Ni-NTA-column (15&nbsp;mL Ni-NTA resin) with a flowrate of 1&nbsp;mL min<sup>-1</sup> cm<sup>-2</sup>. The column was washed with 5&nbsp;column&nbsp;volumes (CV) [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibrationbuffer]. The bound proteins were eluted by an increasing elutionbuffer gradient from 0&nbsp;% (equates to 20&nbsp;mM imidazol) to 100&nbsp;% (equates to 500&nbsp;mM imidazol) with a length of 200&nbsp;mL. This strategy was chosen to improve the purification by a slower increase of [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-elutionbuffer] concentration. The elution was collected in 10&nbsp;mL fractions.Due to the high UV-detection signal of the loaded samples and to simplify the illustration of the detected product peak only the UV-detection signal of the wash step and the elution are shown. A typical chromatogram of purified laccases is illustrated [https://static.igem.org/mediawiki/2012/4/49/Bielefeld2012_Chromatogram_examplegrafik.jpg here]. The chromatogram of the BPUL-elution is shown in figure 5.
 
-
</p>
 
-
 
-
<br style="clear: both" />
 
-
[[File:Bielefeld2012_BPUL6LChromatogramm.jpg|450px|thumb|left|'''Figure 5:''' Chromatogram of wash and elution from FLPC Ni-NTA-Histag Purification of BPUL produced by 6&nbsp;L fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo>. BPUL was eluted between a process volume of 832&nbsp;mL and 900&nbsp;mL with a maximal UV-detection signal of 115&nbsp;mAU.]]
 
-
 
-
<p align="justify">
 
-
The chromatogram shows a peak at the beginning of the elution. This can be explained by pressure fluctuations upon starting the elution procedure. In between the processing volumes of 832&nbsp;mL and 900&nbsp;mL there is remarkable widespread peak with a UV-detection signal of 115&nbsp;mAU. This peak corresponds to an elution of bound proteins at a [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-elutionbuffer] concentration between 10&nbsp;% and 20&nbsp;% (equates to 50-100&nbsp;mM imidazol). The corresponding fractions were analyzed by SDS-PAGE. The ensuing upwards trend of the UV-signal is caused by the increasing imidazol concentration during the elution gradient. Towards the end of the elution procedure there is a constant UV-detection signal, which shows, that most of the bound proteins was already eluted. Just to be on the safe side, all fractions were analyzed by SDS-PAGE to detect BPUL. The SDS-PAGE is shown in figure 6.
 
-
 
-
</p>
 
-
<br style="clear: both" />
 
-
 
-
==SDS-PAGES of purified BPUL==
 
-
<div style="text-align:justify;">
 
-
[[File:Bielefeld2012 0914.jpg|450px|thumb|left|'''Figure 7:''' SDS-PAGE of purified ''E.&nbsp;coli'' with <partinfo>BBa_K863000</partinfo> lysate (fermented in Bioengineering, 6 L). The flow-through, wash and elution fraction 1 to 9 are shown. The arrow marks the BPUL band with a molecular weight of 58.6 kDa. ]]
 
-
 
-
In figure 7 the SDS-PAGE of the Ni-NTA  purification of the lysed culture of ''E. coli'' KRX containing <partinfo>BBa_K863000</partinfo> is illustrated. It shows the flow-through, wash and elution fractions 1 to 9. The His-tagged BPUL has a molecular weight of 58.6 kDA and was marked with a red arrow. The band appears in all fractions from 2 to 9 with varying strength, the strongest ones in fractions 7 to 9. There are also some other non-specific bands, which could not be identified. Therefore the purification method could moreover be improved.
 
-
 
-
Furthermore the bands were analysed by MALDI-TOF and identified as CotA (BPUL).
 
-
</div>
 
-
 
-
<br style="clear: both" />
 
-
 
-
==Activity Analysis of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL]==
 
-
 
-
 
-
===Initial activity tests of purified fractions===
 
-
<p align="justify">
 
-
Initial tests were done with elution fractions 1 to 4 to determine the activity of the purified [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases. The fractions were rebuffered into deionized H<sub>2</sub>O  using [http://www.sigmaaldrich.com/content/dam/sigma-aldrich/docs/Supelco/Product_Information_Sheet/4774.pdf HiTrap Desalting Columns] and incubated with 0.4 mM CuCl<sub>2</sub>. The reaction setup included 140 µL of a elution fraction, 100 mM sodium acetate buffer (pH 5), ad 198 deionized H<sub>2</sub>O and 0.1 mM ABTS and the absorption was measured at 420 nm to detect oxidization over a time period of 5 hours at 25°C. Each fraction did show reactivity in laccases oxidizing ABTS (see figure 8). After 15 minutes the saturation took place with ~60 µM oxidized ABTS. After 5 hours ~5 µM ABTS got reduced again. This behavior has been seen in the activity [https://2012.igem.org/Team:Bielefeld-Germany/Results/Summary#7 plot of TVEL0] before indicating, that this laccase seems to cannot hold the level of oxidized ABTS and reduction of ABTS set in. Additionally protein concentrations of each fraction were identified using the Bradford protocol. The four tested fractions showed approximately the same amount of protein after rebuffering, namely 0.5 mg mL<sup>-1</sup>. Fraction 4, having the most protein and also most of active laccase was chosen for subsequent activity tests of BPUL. The protein concentration was reduced to 0.03 mg mL<sup>-1</sup> for each measured sample to allow a comparison between TVEL0 measurements and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] measurements.
 
-
</p>
 
-
 
-
[[File:Bielefeld2012_Party_Pumi_bestimmung2.jpg|thumbnail|600px|center|'''Figure 8:''' [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase activity measured in 100 mM sodium acetate buffer (pH 5), 0.1 mM ABTS, ad 200 µL deionized H<sub>2</sub>O at 25°C over a time period of 3.5 hours. Each tested fraction reveals activity reaching the saturation after 15 minutes with ~60 µM ABTS<sub>ox</sub>. (n=4)]]
 
-
<br style="clear: both" />
 
-
 
-
===[http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] pH optimum===
 
-
<p align="justify">
 
-
 
-
To determine at which pH the [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase has its optimum in activity, a gradient of sodium acetate buffer pHs was prepared. Starting with pH 1 to pH 9 [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] activity was tested using the described conditions above and 0.03 mg mL<sup>-1</sup> protein. The results are shown in figure 9. A distinct pH optimum can be seen at pH 5. The saturation is reached after 3 hours with 50% oxidization of ABTS through the [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase at pH 5 (55 µM oxidized ABTS) . The other tested pHs only led to a odization of 18% of added ABTS. Figure 10 represents the negative control showing the oxidization of ABTS through 0.4 mM CuCl<sub>2</sub> at the chosen pHs. The highest increase in oxidzied ABTS can be seen at a pH of 5. After 5 hours 15% ABTS are oxidized only through CuCl<sub>2</sub>. Nevertheless this result does not have an impact on the reactivity of the [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase at pH 5, which is still the optimal pH. Therefore it has the same pH optimum as [https://2012.igem.org/Team:Bielefeld-Germany/Results/Summary#7 TVEL0].
 
-
[[File:Bielefeld2012_PH_Pumi1.jpg|thumbnail|500px|center|'''Figure 9:''' [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase activity measured in 100 mM sodium acetate buffer with a range of different pHs from pH 1 to pH 9, 0.1 mM ABTS, ad 200 µL deionized H<sub>2</sub>O at 25°C over a time period of 5hours. The optimal pH for [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] is pH 5 with the most ABTS<sub>ox</sub>.]]
 
-
[[File:Bielefeld2012_PH_neg_control1.jpg|thumbnail|500px|center|'''Figure 10:''' Negative control for pH activity Tests using 0.04 mM CuCl<sub>2</sub> H<sub>2</sub>O instead of Laccase to determine the potential of ABTS getting oxidized through CuCl<sub>2</sub>.]]
 
-
In regard to our project an optimal pH of 5 is a helpful result. Since waste water in waste water treatment plants has a average pH of 6.9 it has to be kept in mind, that a adjustment of the pH is necessary.
 
-
<br style="clear: both" />
 
-
</p>
 
-
 
-
===[http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] CuCl<sub>2</sub> concentration===
 
-
<p align="justify">
 
-
Another test of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] was done to survey the best CuCl<sub>2</sub> concentration for the activity of the purified [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase. 0.03  mg mL<sup>-1</sup> of protein were incubated in different CuCl<sub>2</sub> concentration ranging from 0 to 0.7 mM CuCl<sub>2</sub>. Activity tests were performed with the incubated samples, 100 mM sodium actetate buffer (pH 5), 0.1 mM ABTS, ad 200 µL  H<sub>2</sub>O. The reactivity was measured at 420 nm, 25°C and over a time period of 5 hours. As expected the saturation takes place after 3 hours (see figure 11). The differences in the activity of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases incubated in different CuCl<sub>2</sub> differ minimal. The most percentage is oxidized with [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases incubated with 0.6 mM CuCl<sub>2</sub> (52% of added ABTS). With a higher concentration of 0.7 mM CuCl<sub>2</sub> the activity seems to be reduced (only 48% ABTS got oxidized). This leads to the assumption that CuCl<sub>2</sub> supports the [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase reactivity but concentrations exceeding this value of CuCl<sub>2</sub> may have a negative impact on the ability of oxidizing ABTS. Without any CuCl<sub>2</sub> application [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases do not show any activity in oxidizing ABTS. This fits the expections knowing that laccases are copper reliant enzymes and gain their activity through the incorporation of copper. Additionally negative controls were done using the tested concentrations of CuCl<sub>2</sub> but no laccase to detect the oxidization of ABTS through copper (see figure 12). The more CuCl<sub>2</sub> was applicated, the more ABTS was oxidzied after 5 hours. Still the maximal change accounts ~6% oxidized ABTS after 5 hours.
 
-
[[File:Bielefeld2012_Pumi_Cu1.jpg|thumbnail|500px|center|'''Figure 11:''' Activity measurement using 0.1 mM ABTS of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] incubated in different CuCl<sub>2</sub> concentrations. Without CuCl<sub>2</sub> incubation [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] is not active. Incubation with 0.1 mM CuCl<sub>2</sub> or higher concentrations leas to an increase in ABTS<sub>ox</sub>.]]
 
-
[[File:Bielefeld2012_Pumi_Cu_NegControl1.jpg|thumbnail|500px|center|'''Figure 12:''' Negative control for CuCl<sub>2</sub> activity Tests using different concentrations of CuCl<sub>2</sub> H<sub>2</sub>O instead of Laccase to determine the potential of ABTS getting oxidized through CuCl<sub>2</sub>.]]
 
-
In relation to apply the laccase in waste water treatment plants it is beneficial knowing, that small amounts of CuCl<sub>2</sub> are enough to activate them. This reduces the cost factor and risks.
 
-
<br style="clear: both" />
 
-
</p>
 
-
 
-
===[http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] activity at different temperatures===
 
-
 
-
[[File:Bielefeld2012_BPUL_Temp.jpg|thumbnail|450px|left|'''Figure 13:''' Standard activity test for [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] measured at 10°C and 25°C resulting in a decreased activity at 10°C. As a negative control the impact of 0.4 mM CuCl<sub>2</sub> in oxidizing ABTS at 10°C were analyzed.]]
 
-
<p align="justify">
 
-
To investigate in the activity behaviour of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] at lower tempertaure conditions activity tests as described above were done at 10°C and 25°C. A small decrease in the activity can be observed considering the temperature shift from 25°C to 10°C. After 3.5 hours when  samples at 25°C reached the saturation samples at 10°C had not, but nonetheless the difference is minimal. After 3 hours 5% difference in oxidized ABTS is observable. The negative control without the[http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase but 0.4 mM CuCl<sub>2</sub> at 10°C shows a negligible effect on the status of ABTS.
 
-
A decrease in the reactivity of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases was expected. Since it is not reduced in a high manner it is applicable for usage in waste water treatment plants where the temperature differs from 8.1°C to 20.8°C.
 
-
<br style="clear: both" />
 
-
</p>
 
-
 
-
===[http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] activity depending on different ABTS concentrations===
 
-
 
-
[[File:Bielefeld2012_BPUL_ABTS.jpg|thumbnail|450px|left|'''Figure 14:''' Analysis of ABTS oxidation by [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] Laccases tested with different amounts of ABTS. The higher the amount of ABTS the more oxidized ABTS can be detected.]]
 
-
<p align="justify">
 
-
Furthermore [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases were tested using different amounts of ABTS to calculate K<sub>M</sub> and K<sub>cat</sub> values. The same measurement setup as described above was used only with different amounts of ABTS. As anticipated the amount of oxidized ABTS increased dependent on the amount of used ABTS (figure 14). Especially using 16 µL showed an increase in the reactivity until 1 hour (reaching 50 µM ABTS<sub>ox</sub> but the amount of oxidized ABTS decreased afterward.
 
-
<br style="clear: both" />
 
-
</p>
 
-
===Impact of MeOH and acteonitrile on [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL]===
 
-
<p align="justify">
 
-
For substrate analytic tests the influence of MeOH and acetonitrile on [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases had to be determined, because substrates have to be dissolved in these reagents. The experiment setup included 0.03 mg mL<sup>-1</sup> [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccase, 100 mM sodium actetate buffer, different amounts of MeOH (figure 15) or acteonitrile (figure 16), 0.1 mM ABTS, ad 200 µL deionized  H<sub>2</sub>O. The observed reactivity of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] in regard of oxidizing ABTS did not reveal a huge decrease. The less MeOH or acetonitrile was used, the higher was the amount of oxidized ABTS after 3 hours. An application of 16 µL MeOH or acetonitrile led to a decrease of maximal 10% oxidized ABTS compared to 2 µL MeOH or acetonitrile.
 
-
[[File:Bielefeld2012_Pumi_MeOH1.jpg|thumbnail|500px|center|'''Figure 15:''' Standard [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] activity test applying different amounts of MeOH. No considerable impact on the activity can be detected.]]
 
-
[[File:Bielefeld2012_Pumi_acetonitrile1.jpg|thumbnail|500px|center|'''Figure 16:''' Standard [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] activity test applying different amounts of acetonitrile. No considerable impact on the activity can be detected.]]
 
-
<br style="clear: both" />
 
-
 
-
</p>
 
-
<html>
 
-
</p>
 
-
</div>
 
-
<div id="anzeige">
 
-
</html>
 
-
<h1>Laccase CueO from [https://www.atcc.org/ATCCAdvancedCatalogSearch/ProductDetails/tabid/452/Default.aspx?ATCCNum=BAA-1025&Template=bacteria ''Escherichia coli'' BL21] (DE3)</h1>
 
-
<html>
 
-
<p class="more"> First some trials of shaking flask cultivations were made with changing parameters to identify the best conditions for the production of the laccase CueO from ''E. coli'' BL21 (DE3) named ECOL fused to a Histag. Because of no measured activity in the cell lysate a purification method was established (using Ni-NTA-Histag resin). The purified ECOL could be identified by SDS-PAGE (molecular weight of 53.4 kDa) as well as MALDI-TOF. The fractionated samples were also tested concerning their activity. A maximal activity of X was reached. After measuring activity of ECOL a scale up was made up to 3 L and then also up to 6 L.
 
-
</html>
+
-
__NOTOC__
+
-
 
+
-
==Shaking Flask Cultivations==
+
-
<div style="text-align:justify;">
+
-
The first trials to produce ECOL were produced in shaking flask with various designs (from 100&nbsp;mL<sup>-1</sup> to 1&nbsp;L flasks, with and without baffles) and under different conditions. The parameters we have changed during our screening experiments were temperature (27&nbsp;°C,30&nbsp;°C and 37&nbsp;°C), concentrations of chloramphenicol (20-170&nbsp;µg&nbsp;mL<sup>-1</sup>), various induction strategies ([https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction] and manual induction) and cultivation time (6 - 24&nbsp;h). Further we cultivated with and without 0.25&nbsp;mM CuCl<sub>2</sub> to provide a sufficient amount of copper, which is needed for the active center of the laccase. Due to the screening experiments we identified the best conditions under which ECOL was expressed:
+
-
 
+
-
* flask design: shaking flask without baffles
+
-
* medium: [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction medium]
+
-
* antibiotics: 60&nbsp;µg&nbsp;mL<sup>-1</sup> chloramphenicol
+
-
* temperature: 37&nbsp;°C
+
-
* cultivation time: 12&nbsp;h
+
-
 
+
-
The reproducibility and repeatability of the measured data and results were investigated for the shaking flask and bioreactor cultivation.
+
-
</div>
+
-
 
+
-
==3&nbsp;L Fermentation ''E. coli'' KRX with <partinfo>BBa_K863005</partinfo>==
+
-
 
+
-
[[File:Bielefeld2012_ECOL3LFermentation.jpg|450px|thumb|left|'''Figure 1:''' Fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863005</partinfo> (ECOL) in Infors Labfors Bioreactor, scale: 3&nbsp;L, [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction medium] + 60&nbsp;µg/mL chloramphenicol, 37&nbsp;°C, pH&nbsp;7, agitation on cascade to hold a pO<sub>2</sub> of 50&nbsp;%, OD<sub>600</sub> taken every 30&nbsp;minutes.]]
+
-
 
+
-
<p align="justify">
+
-
After the positive measurement of activity of ECOL we made a scale-up and fermented ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863005</partinfo> in Infors Labfors with a total volume of 3&nbsp;L. Agitation speed, pO<sub>2</sub> and were determined and illustrated in figure 1. The exponential phase started after 1.5&nbsp;hours of cultivation. The cell growth caused a decrease in pO<sub>2</sub>. After 2&nbsp;hours of cultivation the agitation speed increased up to 629&nbsp;rmp (5.9&nbsp;hours) to hold the minimal pO<sub>2</sub> level of 50&nbsp;%. Then, after 4&nbsp;hours there was a break in cell growth due to induction of protein expression. The maximal OD<sub>600</sub> of 2.78 was reached after 5&nbsp;hours. In comparison to ''E.&nbsp;coli'' KRX (OD<sub>600,max</sub> =4.86 after 8.5 hours) and to ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> (OD<sub>600,max</sub> =3.53 after 10 hours, time shift due to long lag phase) the OD<sub>600 max</sub> is lower. In the following hours, the OD<sub>600,max</sub> and the agitation speed decreased and the pO<sub>2</sub> increased, which indicates the death phase of the cells. This is caused by the cell toxicity of ECOL (reference: [http://www.dbu.de/OPAC/ab/DBU-Abschlussbericht-AZ-13191.pdf  DBU final report]). Therefore they were harvested after 12&nbsp;hours.
+
-
</p>
+
-
 
+
-
 
+
-
<br style="clear: both" />
+
-
 
+
-
==Purification of ECOL==
+
-
 
+
-
<p align="justify">
+
-
The harvested cells were resuspended in [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibration buffer], mechanically lysed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#Mechanical_lysis_of_the_.28bio-reactor.29_cultivation homogenization] and centrifuged. The supernatant of the lysed cell paste was loaded on the Ni-NTA-column (15&nbsp;mL Ni-NTA resin) with a flow rate of 1&nbsp;mL min<sup>-1</sup> cm<sup>-2</sup>. Then the column was washed by 10&nbsp;column&nbsp;volumes (CV) [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibration buffer]. The bound proteins were eluted by an increasing [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-elution buffer] step elution from 5&nbsp;% (equates to 25&nbsp;mM imidazol) with a length of 50&nbsp;mL, to 50&nbsp;% (equates to 250&nbsp;mM imidazol) with a length of 60&nbsp;mL, to 80&nbsp;% (equates to 400&nbsp;mM imidazol) with a length of  40&nbsp;mL and finally to 100&nbsp;% (equates to 500&nbsp;mM imidazol) with a length of 80&nbsp;mL. This strategies was chosen to improve the purification caused by a step by step increasing Ni-NTA-elution buffer concentration. The elution was collected in 10&nbsp;mL fractions. Due to the high UV-detection signal of the loaded samples and to simplify the illustration of the detected product peak only the UV-detection signal of the wash step and the elution are shown. A typical chromatogram of purified laccases is illustrated [https://static.igem.org/mediawiki/2012/4/49/Bielefeld2012_Chromatogram_examplegrafik.jpg here].The chromatogram of the ECOL-elution is shown in figure 2:
+
-
</p>
+
-
 
+
-
[[File:Bielefeld2012_ECOL3LChromatogramm.jpg|450px|thumb|left|'''Figure 2:''' Chromatogram of wash and elution from FLPC Ni-NTA-Histag Purification of ECOL produced by 3&nbsp;L fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863005</partinfo>. ECOL was eluted by a concentration of 50&nbsp;% (equates to 250&nbsp;mM imidazol) with a maximal UV-detection signal of 292&nbsp;mAU. ]]
+
-
 
+
-
<p align="justify">
+
-
The chromatogram shows two distinguished peaks. The first peak was detected by a [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibration buffer] concentration of 5&nbsp;% (equates to 25&nbsp;mM imidazol) and resulted from the elution of weakly bound proteins. After increasing the Ni-NTA-elutionbuffer concentration to 50&nbsp;% (equates to 250&nbsp;mM imidazol) a peak up to a UV-detection signal of 292&nbsp;mAU was measured. The area of this peak indicates that a high amount of protein was eluted. The corresponding fractions were analyzed by SDS-PAGE to detect ECOL. There were no further peaks detectable. The following increasing UV-detection-signals equates to the imidazol concentration of the Ni-NTA-elution buffer. The corresponding SDS-PAGES are shown in figure 3.
+
-
</p>
+
-
 
+
-
<br style="clear: both" />
+
-
 
+
-
==SDS-PAGE of ECOL purification==
+
-
 
+
-
[[File:Bielefeld2012_SDS_ECOL3L.jpg|450px|thumb|left|'''Figure 3:''' SDS-Pages of purified  ''E.&nbsp;coli'' KRX containing [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863005 BBa_K863005] lysate (fermented in 3&nbsp;L Infors Labfors). The flow-through, wash and elution fraction 2-9 are shown. The arrow marks the ECOL band with a molecular weight of 53.4&nbsp;kDa.]]
+
-
<p align="justify">
+
-
In figure 3 the SDS-PAGE of the Ni-NTA-His tag purification of the lysed culture (''E.&nbsp;coli'' KRX containing [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863005 BBa_K863005]) is illustrated including the flow-through and the fractions 2 to 9. The red arrow indicates the band of ECOL with a molecular weight of 53.4&nbsp;kDa, which appears in all fractions. The strongest bands appear in fractions 6 and 7. These were the first two fractions (each 10 mL) eluted with 50 % Ni-NTA elution buffer (equates to 250 mM imidazol), in which the distinguished peak appeared. The second small band with a lower molecular weight was not identified.
+
-
 
+
-
Furthermore the bands were analyzed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Analytics#MALDI MALDI-TOF] and identified as CueO (ECOL).
+
-
<br style="clear: both" />
+
-
</p>
+
-
 
+
-
==6&nbsp;L Fermentation ''E. coli'' KRX with <partinfo>BBa_K863005</partinfo>==
+
-
 
+
-
[[File:Bielefeld2012_ECOL6LFermentation.jpg|450px|thumb|left|'''Figure 4:''' Fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863005</partinfo> (ECOL) in Bioengineering NFL22, scale: 6&nbsp;L, [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction medium] + 60&nbsp;µg/mL chloramphenicol, 37&nbsp;°C, pH&nbsp;7, agitation increased when pO<sub>2</sub> was below 30&nbsp;%, OD<sub>600</sub> taken every hour.]]
+
-
 
+
-
 
+
-
<p align="justify">
+
-
Another scale-up of the fermentation of E.&nbsp;coli KRX with <partinfo>BBa_K863005</partinfo> was made up to a final working volume of 6&nbsp;L in Bioengineering NFL 22. Agitation speed, pO<sub>2</sub> and OD<sub>600</sub> were determined and illustrated in figure&nbsp;3. There was no noticeable lag phase and the cells immediately began to grow. The cells were in an exponential phase between 2 and 4&nbsp;hours of cultivation, which results in a decrease of pO<sub>2</sub> value and therefore in an increase of agitation speed. After 4&nbsp;hours of cultivation the maximal OD<sub>600</sub> of 2.76 was reached, which is comparable to the 3&nbsp;L fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863005</partinfo>. Due to induction of protein expression there is a break in cell growth. The death phase started, which is indicated by an increasing pO<sub>2</sub> and a decreasing OD<sub>600</sub>. This demonstrates the cytotoxity of the laccases for ''E. coli'', which was reported by the [http://www.dbu.de/OPAC/ab/DBU-Abschlussbericht-AZ-13191.pdf DBU]. In comparison to the fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> under the same conditions (OD<sub>600,max</sub>= 3.53), the OD<sub>600,max</sub> was lower. Cells were harvested after 12&nbsp;hours.
+
-
</p>
+
-
 
+
-
<br style="clear: both" />
+
-
 
+
-
==Purification of ECOL==
+
-
 
+
-
<p align="justify">
+
-
The harvested cells were resuspended in [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibratio nbuffer], mechanically lysed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#Mechanical_lysis_of_the_.28bio-reactor.29_cultivation homogenization] and centrifuged. The supernatant of the lysed cell paste was loaded on the Ni-NTA-column (15&nbsp;mL Ni-NTA resin) with a flow rate of 1&nbsp;mL min<sup>-1</sup> cm<sup>-2</sup>. The column was washed by 10&nbsp;column&nbsp;volumes (CV) [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibration buffer]. The bound proteins were eluted by an increasing [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-elution buffer] gradient from 0&nbsp;% to 100&nbsp;% with a length of 200&nbsp;mL and the elution was collected in 10&nbsp;mL fractions. Due to the high UV-detection signal of the loaded samples and to simplify the illustration of the detected product peak only the UV-detection signal of the wash step and the elution are shown. A typical chromatogram of purified laccases is illustrated [https://static.igem.org/mediawiki/2012/4/49/Bielefeld2012_Chromatogram_examplegrafik.jpg here]. The chromatogram of the ECOL elution is shown in figure&nbsp;4:
+
-
</p>
+
-
 
+
-
[[File:Bielefeld2012_ECOL6LChromatogramm.jpg|450px|thumb|left|'''Figure 5:''' Chromatogram of wash and elution from FLPC Ni-NTA His tag purification of ECOL produced by 3&nbsp;L fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863005</partinfo>. ECOL was eluted between a process volume 670&nbsp;mL to 750&nbsp;mL with a maximal UV-detection signal of 189&nbsp;mAU.]]
+
-
 
+
-
 
+
-
<p align="justify">
+
-
After washing the column with 10 CV [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-elution buffer] the elution process was started. At a process volume of 670&nbsp;mL to 750&nbsp;mL the chromatogram shows a remarkable widespread peak (UV-detection signal 189&nbsp;mAU) caused by the elution of a high amount of proteins. The run of the curve show a fronting. This can be explained by the elution of weakly bound proteins, which elutes at low imidazol concentrations. A better result could be achieved with a step elution strategy ([https://2012.igem.org/Team:Bielefeld-Germany/Results/Summary#Purification_of_ECOL see purification of the 3 L Fermentation above]). To detect ECOL the corresponding fractions were analyzed by SDS-PAGE.
+
-
</p>
+
-
<br style="clear: both" />
+
-
 
+
-
==SDS-PAGES of ECOL purification==
+
-
 
+
-
[[File:Bielefeld2012_coli0910.jpg|450px|thumb|left|'''Figure 6:''' SDS-Pages of lysed culture of ''E.&nbsp;coli'' KRX containing [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863005 BBa_K863005] (fermented in 6&nbsp;L Bioengineering NFL22) after purification. The flow-through, wash and elution fraction 1-15 are shown (except from fraction 11/12). The arrow marks the ECOL band with a molecular weight of 53.4&nbsp;kDa.]]
+
-
 
+
-
<p align="justify">
+
-
In figure 6 the result of the Ni-NTA-Histag purification of the lysed culture ''E.&nbsp;coli'' KRX containing [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863005 BBa_K863005] (6&nbsp;L fermentation) including the flow-through, wash and the fractions 1 to 15 (except from fraction 11/12) is shown. The red arrow indicates the band of ECOL with a molecular weight of 53.4&nbsp;kDa, which appears in all fractions. The strongest bands appear from fractions 3 and 8 with a decreasing amount of other non-specific bands.
+
-
 
+
-
Furthermore the bands were analyzed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Analytics#MALDI MALDI-TOF] and identified as CueO (ECOL).
+
-
<br style="clear: both" />
+
-
</p>
+
-
 
+
-
==Activity Analysis of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863005 ECOL]==
+
-
<p align="justify">
+
-
 
+
-
=== Initial activity tests of purified fractions ===
+
-
=== [http://partsregistry.org/Part:BBa_K863005 ECOL] pH optimum ===
+
-
=== [http://partsregistry.org/Part:BBa_K863005 ECOL] CuCl<sub>2</sub> concentration ===
+
-
=== [http://partsregistry.org/Part:BBa_K863005 ECOL] activity at different temperatures ===
+
-
=== Impact of MeOH and acteonitrile on [http://partsregistry.org/Part:BBa_K863005 ECOL] ===
+
-
 
+
-
 
+
-
 
+
-
</p>
+
-
<html>
+
-
</p>
+
-
+
-
 
+
-
+
-
</div>
+
-
 
+
-
 
+
-
 
+
-
<div id="anzeige">
+
-
</html>
+
-
<h1>Laccase Ltth from [http://www.dsmz.de/catalogues/details/culture/DSM-7039.html?tx_dsmzresources_pi5  ''Thermus thermophilus'' HB27] </h1>
+
-
<html>
+
-
<p class="more">
+
-
</html>
+
-
First some trials of shaking flask cultivations were made with different parameters to define the best conditions for the production of the His-tagged laccase Ltth from [http://www.dsmz.de/catalogues/details/culture/DSM-7039.html?tx_dsmzreso ''Thermus thermophilus'' HB27] named TTHL. Because of no measured activity in the cell lysate a purification method was established (using Ni-NTA-Histag resin). Using ''E. coli'' KRX containing BioBrick <partinfo>BBa_K863010</partinfo> TTHL could not be detected by SDS-PAGE (molecular weight of 53&nbsp;kDa) or by activity test. Therefore a new BioBrick <partinfo>BBa_K863012</partinfo> was constructed and expressed in ''E. coli'' Rosetta-Gami&nbsp;2. With this expression system the TTHL could be detected by SDS-PAGE (molecular weight of 53 kDa). To prove the activity of the produced laccase we used a small scale Ni-NTA-column to purify it. The fractionated samples were tested concerning their activity. Activity in oxidizing ABTS has been detected. After measuring activity of TTHL a scale up was made up to 6&nbsp;L.
+
-
 
+
-
__NOTOC__
+
-
 
+
-
==Shaking Flask Cultivation==
+
-
<div style="text-align:justify;">
+
-
The first trials to produce the Ltth-laccase from [http://www.dsmz.de/catalogues/details/culture/DSM-7039.html?tx_dsmzresources_pi5 ''Thermo thermophilus'' HB27] (named TTHL) were performed in shaking flasks with various volumes (from 100&nbsp;mL to 1&nbsp;L flasks, with and without baffles) and under different conditions. The used BioBrick was <partinfo>BBa_K863010</partinfo> and expressed in ''E. coli'' KRX. The changed parameters during the screening experiments were temperature (27&nbsp;°C, 30&nbsp;°C and 37&nbsp;°C), concentration of chloramphenicol (20-170&nbsp;µg&nbsp;mL<sup>-1</sup>), induction strategy ([https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction] and manual induction with 0,1&nbsp;% rhamnose) and cultivation time (6 to 24&nbsp;h). Furthermore, ''E. coli''was cultivated with and without 0,25&nbsp;mM CuCl<sub>2</sub> to provide a sufficient amount of copper, which is needed for the active center of the laccase. Under the screened conditions it was not observable that ''E. coli'' KRX produces active TTHL. Therefore another BioBrick was constructed and another chassi was chosen. For further cultivations the BioBrick <partinfo>BBa_K863012</partinfo> was used, which has a constitutive promoter insteat of the T7 promoter system. Additionally, the strain ''E. coli'' Rosetta-Gami 2 was chosen, because of its ability to translate rare codons. TTHL was then produced under the following conditions:
+
-
</div>
+
-
* flask design: shaking flask without baffles
+
-
* medium: [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#LB_medium LB-Medium]
+
-
* antibiotics: 60&nbsp;µg&nbsp;mL<sup>-1</sup> chloramphenicol and 300&nbsp;µg&nbsp;mL<sup>-1</sup> ampicillin
+
-
* temperature: 37&nbsp;°C
+
-
* cultivation time: 24&nbsp;h
+
-
 
+
-
The reproducibility of the measured data and results were investigated for the shaking flask cultivation, but not yet for the bioreactor cultivation.
+
-
 
+
-
==Fermentation of ''E. coli'' KRX with <partinfo>BBa_K863012</partinfo>==
+
-
 
+
-
 
+
-
 
+
-
 
+
-
[[File:Bielefeld2012_TTHL6LFermentation.jpg|450px|thumb|left|'''Figure 1:''' Fermentation of ''E.&nbsp;coli'' Rosetta-Gami 2 with <partinfo>BBa_K863012</partinfo> (TTHL) in a Bioengineering NFL22. Conditions: 6&nbsp;L of [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Autoinduction_medium autoinduction medium] + 60&nbsp;µg/mL chloramphenicol at 37&nbsp;°C, pH&nbsp;7. Agitation increased when pO<sub>2</sub> was below 30&nbsp;% and OD<sub>600</sub> was measured each hour.]]
+
-
<div style="text-align:justify;">
+
-
After measuring activity of TTHL we made a scale-up and fermented ''E.&nbsp;coli'' Rosetta-Gami 2 with <partinfo>BBa_K863000</partinfo> in a Bioengineering NFL22 with a total volume of 6&nbsp;L. Agitation speed, pO<sub>2</sub> and OD<sub>600</sub> were monitored and are illustrated in Figure 1. There is no noticeable lag phase. Due to the cell growth the pO<sub>2</sub> decreased to a value of 0&nbsp;%, which was additionally caused by the breakdown of the control unit. After a cultivation time of 9&nbsp;hours the agitation speed was increased manually up to 500&nbsp;rpm, which resulted in a higher pO<sub>2</sub> value of more than 100&nbsp;% for the rest of the cultivation. During the whole process the OD<sub>600</sub> increased slower when compared to the fermentation of ''E.&nbsp;coli'' KRX with <partinfo>BBa_K863000</partinfo> or <partinfo>BBa_K863005</partinfo>. The maximal OD<sub>600</sub> was reached after 19 hours of cultivation time so that the cells were harvested.
+
-
 
+
-
<br style="clear: both" />
+
-
</div>
+
-
 
+
-
==Purification of TTHL==
+
-
 
+
-
 
+
-
<p align="justify">
+
-
The cells were harvested and resuspended in [https://2012.igem.org/wiki/index.php?title=Team:Bielefeld-Germany/Protocols/Materials#Buffers_for_His-Tag_affinity_chromatography Ni-NTA-equilibrationbuffer], mechanically lysed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#Mechanical_lysis_of_the_.28bio-reactor.29_cultivation homogenization] and centrifuged. After preparing the cell paste the TTHL could not be purificate with the 15&nbsp;mL column, because of its damage. For this reason a small scale purification (6&nbsp;mL) of the supernatant of the lysate was made with a 1&nbsp;mL Ni-NTA-column.
+
-
</p>
+
-
 
+
-
==SDS-PAGE of purification TTHL==
+
-
<div style="text-align:justify;">
+
-
[[File:Bielefeld2012_0923.jpg|450px|thumb|left|'''Figure&nbsp;2:''' SDS-PAGE of purified ''E. coli'' Rosetta-Gami&nbsp;2 containing <partinfo>BBa_K863012</partinfo> lysate (fermented in 6 L Bioengineering NFL22). The flow-through, wash and elution fraction 1 to 5 are shown. The arrow marks the TTHL band with a molecular weight of 53&nbsp;kDa.]]
+
-
 
+
-
Figure 2 shows the SDS-PAGE of the purified ''E.&nbsp;coli'' Rosetta-Gami 2 lysates fermented in 6&nbsp;L Bioengineering NFL22 including the flow-through, wash and all elution fractions (1 to 5). TTHL has a molecular weight of 53&nbsp;kDa and the corresponding band was marked with a red arrow. The TTHL band appears in fractions 1 to 3, but not in the other two elution fractions. Furthermore there are some other non-specific bands, which could not be identified. To improve the purification the 15&nbsp;mL column and [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#.C3.84KTA_method ÄKTA method] could be used.
+
-
</div>
+
-
<br style="clear: both" />
+
-
 
+
-
==Activity Analysis of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863012 TTHL]==
+
-
<p align="justify">
+
-
Although there was no activity measurable after cultivation and purification of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863010 TTHL under a T7 promoter], activity tests of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863012 TTHL under a constitutive promoter] did reveal TTHL laccases capable of oxidzing ABTS. Fractions 1 to 5 of the purification above were rebuffered into deionized H<sub>2</sub>O and icubated with 0.4 mM CuCl<sub>2</sub> for 2 hours. Activity measurements took place using 100 mM sodiume acetate buffer, 140 µL sample, 0.1 mM ABTS, ad 200 µL deionized  H<sub>2</sub>O. The change in optical density at 420 nm was detected, reporting the oxidization of ABTS through laccases. Fractions 2 to 5 show activity (figure 3). Fraction 2 seems to contain most of TTHL showing the highest activity compared to the other fractions: 40% of the used ABTS have been oxidized after 2 hours. With this in mind protein concentrations have to be determined and the activity of the TTHL laccase can be characterized in further experiments including pH optimum and activity in regard of temperature shifts.
+
-
[[File:Bielefeld2012_17_09_TTHL1.jpg|thumbnail|450px|center|'''Figure 3:''' Activity test of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863012 TTHL] fractions resulting from the purification. Reaction setup includes 100 mM sodium actetate buffer (pH 5), 140 µL fraction sample (CuCl<sub>2</sub> incubated), 0.1 mM ABTS, ad 200 µL deionized H<sub>2</sub>O. Measurements were done at 25°C and over a time period of 5 hours. [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863012 TTHL] shows activity in oxidizing ABTS except fractions 1 seems to have no active [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863012 TTHL]. (n=4)]]
+
-
 
+
-
</p>
+
-
<br style="clear: both" />
+
-
 
+
-
 
+
-
<html>
+
-
 
+
-
</p>
+
-
+
-
 
+
-
+
-
</div>
+
-
 
+
-
<div id="anzeige">
+
-
</html>
+
-
<h1>Laccase Lbh1 from [http://www.dsmz.de/catalogues/details/culture/DSM-18197.html?tx_dsmzresources_pi5 ''Bacillus halodurans'' C-125] </h1>
+
-
<html>
+
-
<p class="more">
+
-
</html>
+
-
First some trials of shaking flask cultivations were made with various parameters to identify the best conditions for the production of the His-tagged laccase Lbh1 from [http://www.dsmz.de/catalogues/details/culture/DSM-18197.html?tx_dsmzresources_pi5 ''Bacillus halodurans'' C-125 ] named BHAL. Because of no measured activity in the cell lysate a purification method was established (using Ni-NTA-Histag resin). BHAL could not be detected by SDS-PAGE (theoretical molecular weight of 56&nbsp;kDa) or activity test by using the BioBrick <partinfo>BBa_K863020</partinfo> and ''E. coli'' KRX as expression system. Due to this results the new BioBrick <partinfo>BBa_K863022</partinfo> was constructed and expressed ''E. coli'' Rossetta-Gami&nbsp;2. With this expression system the laccase could be produced and analysed via SDS-PAGE. To prove the activity of the produced laccase we used a small scale Ni-NTA-column to purify our laccase. The fractionated samples were tested concerning their activity with ABTS and showed ability in oxidizing ABTS. A scale up was not yet performed.
+
-
 
+
-
==Cultivation==
+
-
<div style="text-align:justify;">
+
-
The first trials to produce the Lbh1 - laccase from Bacillus Halodurans (named BHAL) were performed in shaking flasks with various flask designs (from 100 mL-1 to 1 L flasks, with and without baffles) and under several conditions. The varied parameters in our screening experiments were temperature (27 °C,30 °C and 37 °C), concentration of chloramphenicol (20-170 µg mL<html><sup>-1</sup></html>), induction strategy (autoinduction and manual induction with 0,1 % rhamnose) and cultivation time (6 to 24 h). Furthermore we cultivated with and without 0.25 mM CuCl<html><sub>2</sub></html> to provide a sufficient amount of copper, which is needed for the active center of the laccase. ''E.coli'' KRX was not able to produce active BHAL under the screened conditions, therefore another chassis was chosen. For further cultivations ''E. coli'' Rosetta-Gami 2 was transformed with BBa_K863012, because of its ability to translate rare codons. BHAL was produced under the following conditions:
+
-
</div>
+
-
* flask design: shaking flask without baffles
+
-
* medium: [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#LB_medium LB]-Medium
+
-
* antibiotics: 60 µg mL<html><sup>-1</sup></html> chloramphenicol and 300 µg mL<html><sup>-1</sup></html> ampicillin
+
-
* temperature: 37 °C
+
-
* cultivation time: 24 h
+
-
 
+
-
Just a small scale cultivation was performed so far.
+
-
 
+
-
==Purification==
+
-
 
+
-
<div style="text-align:justify;">
+
-
The cells were harvested and resuspended in Ni-NTA-equilibrationbuffer, mechanically lysed by sonification and centrifuged. After preparing the cell paste the BHAL could not be purificate with the 15 mL column, because of its damage. For this reason a small scale purification (6 mL) of the supernatant of the lysate was made with a [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#Syringe_method 1 mL Ni-NTA-column]. The elution was collected in 1 mL fractions.
+
-
</div>
+
-
 
+
-
==SDS-PAGE==
+
-
 
+
-
<div style="text-align:justify;"> [[File:Bielefeld2012_0913.jpg|450px|thumb|left|'''Figure 1:'''SDS-PAGE of purified lysate of flask cultivation of ''E. coli'' Rosetta-Gami 2 with <partinfo>BBa_K863022</partinfo>. Lanes 2 to 7 show the flow-through, the wash and the elution fractions 1 to 4. BHAL has a molecular weight of 56 kDa and is marked with an arrow.]]
+
-
 
+
-
In figure 1 the different fractions of the purified cell lysate of ''E.&nbsp;coli'' Rosetta-Gami 2 with <partinfo>BBa_K863022</partinfo> are shown in a SDS-PAGE. BHAL has a molecular weight of 56 kDa. In lane 5, which corresponds to the elution fraction 2, a light band of 56 kDa is visible. Therefore the fractions were further analysed by activity test and MALDI-TOF.
+
-
</div>
+
-
<br style="clear: both" />
+
-
 
+
-
==Activity Analysis of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863022 BHAL]==
+
-
<p align="justify">
+
-
 
+
-
The resulting fractions of the cultivation and pruification of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863022 BHAL] (fraction 1 to 5) were analysed with activity tests. After rebuffering into deionized H<sub>2</sub>O and icubation with 0.4 mM CuCl<sub>2</sub> for 2 hours, the samples were measured with 100 mM sodium acetate buffer, 140&nbsp;µL sample, 0.1 mM ABTS, ad 200 µL deionized  H<sub>2</sub>O. The change in optical density was measured at 420 nm, reporting the oxidization of ABTS through laccases for 5 hours at 25°C. An increase in ABTS<sub>ox</sub> can be seen (figure 2), indicating produced [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863022 BHAL] laccase in each fraction. Fraction 2 shows the highest amount of ABTS<sub>ox</sub> (55%) after reaching its saturation after 3 hours. Compared to [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863000 BPUL] laccases [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863022 BHAL] is capable to reach a saturation after 3 hours with approximately oxidizing 55% of used ABTS. Therefore [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863022 BHAL] is a interesting laccase for the project and is going to be characterized further.
+
-
[[File:Bielefeld2012_17_09_BHAL1.jpg|thumbnail|center|450px|'''Figure 2''': Activity test of [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863022 BHAL] fractions after purification. Reaction setup includes 100 mM sodium actetate buffer (pH 5), 140 µL fraction sample (CuCl2 incubated), 0.1 mM ABTS, ad 200 µL deionized H2O. Measurements were done at 25°C and over a time period of 5 hours. Each fraction shows activity, especially fraction 2, which therefore contains most [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863022 BHAL] laccase. (n=4)]]
+
-
 
+
-
</p>
+
-
 
+
-
 
+
-
<html>
+
-
+
-
</div>
+
-
 
+
-
<div id="anzeige">
+
-
+
-
<h1>Laccase from Trametes versicolor </h1>
+
-
+
-
<p class="more">
+
-
</html>
+
-
__NOTOC__
+
-
 
+
-
==TVEL0 Activity Tests==
+
-
 
+
-
[http://www.sigmaaldrich.com/catalog/product/sigma/51639?lang=de&region=DE TVEL0] was characterized in terms of its activity to establish activity test protocols and to create a standard which can be used as a reference.
+
-
 
+
-
<html>
+
-
</p>
+
-
+
-
 
+
-
+
-
</div>
+
<div id="anzeige">
<div id="anzeige">
Line 559: Line 164:
__NOTOC__
__NOTOC__
-
==Introduction==
 
-
==Immobilization on silica dioxide beads==
 
-
 
-
 
-
== Immobilization on CPC-beads ==
 
-
 
-
===Improvement of bead concentration and incubation time===
 
-
To improve the immobilization proses  were different concentrations of CPC-beads incubated with 1 mL TVEL0 solution for 36 hours. The protein concentration was measured with [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials Roti®-Nanoquant].
 
-
 
-
To determine the optimal ratio of s CPC-beads to protein for immobilization, the binding capacity (B<sub>c</sub>) is plotted against the concentration of CPC-beads.
 
-
 
-
[[File:Bielefeld2012_Immobilisierung_bindingcapacity.jpg|150px|center]]
 
-
 
-
<br style="clear: both" />
 
-
 
-
The binding capacity shows that the best immobilization result is reached  with a CPC-bead concentration of 0.12 g/ mL.
 
-
Therefor we used this concentration for further experiments.
 
-
 
-
[[File:Bielefeld2012_improvement-of-beat-concentration.jpg|300px|left|thumb|Fig. Binding capacity of different CPC-bead concentrations plotted against the concentration of CPC-beads used to immobilize TVEL0, shown for the Improvement of the immobilization strategy while using different beat concentrations and incubation for 36 hours]]
 
-
 
-
<br style="clear: both" />
 
-
 
-
To optimize the incubation time was the optimal beat concentration of 0.12 g/ mL (fig. …) incubated for different time periods in 1 mL of the same protein solution that was used for the improvement of the beat concentration.
 
-
Fig. … shows the mass of bound protein [µg] per g beats.
 
-
 
-
[[File:Bielefeld2012_improvement-of-incubation-time.jpg|300px|left|thumb|Fig. Mass of bound protein [µg] per g beats incubated for different time periods to optimize the incubation time.]]
 
-
 
-
<br style="clear: both" />
 
-
 
-
As can be seen binds the main concentration of protein during the first 12 hours of incubation. Because of the used literature we incubated fist for 18 and 36 hours, and chose 24h of incubation for further experiments.
 
-
 
-
===Immobilization behavior===
 
-
 
-
To analyze the immobilization behavior of the CPC-beads for different lacasses were TVEL0, ECOL and BPUL immobilized on CPC-beads. Therefor we used a beat concentration of 0.12 g/mL with an incubation time of 24 hours. The protein concentration was measured with [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials Roti®-Nanoquant].
 
-
In fig. … is the protein concentration in the supernatant shown of a percentage of the inserted protein concentration.
 
-
 
-
[[File:Bielefeld2012_protein-concentration.jpg|300px|left|thumb|Fig... Protein concentration in % of the original inserted Protein concentration in the supernatant after immobilization of TVEL0, ECOL and BPUL on 0.12 g/ml CPC-beads and incubation for 24 hours.]]
 
-
 
-
<br style="clear: both" />
 
-
 
-
Fig..  show that the best immobilization result is reached with ELOL with 0.2 % of the original inserted protein concentration left in supernatant of immobilized CPC-beads. The TVEL0 shows a remaining of proteins in supernatant of 12.4 % of the original inserted protein concentration and BPUL 74,2 %.
 
-
 
-
 
-
Table
 
-
 
-
 
-
Table … shows the real inserted protein concentrations.
 
-
Because of the low protein concentration in the used lacasse solutions, were they used directly, which means that it was not possible to immobilize the same concentration of all three lacasses.
 
-
 
-
===Enzyme activity of immobilized Lacasses===
 
-
 
-
To analyze the activity of the bound lacasses were they immobilized on 0.12 g/ mL beats and incubated for 24 hours. The [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Immobilization activity of the beats] was measured over a period 65 minutes in case of TVEL0 and over 180 minutes in case of ECOL and BPUL.
 
-
 
-
==Literature==
 
-
 
-
[1]Fernández-Fernández M ''et al''. (2012) Recent developments and applications of immobilized laccase. ''Biotechnol Adv.'' 2012 Feb 28. [Epub ahead of print]
 
-
 
-
[2]P.-P. Champagne and J.A. Ramsay (2007) Reactive blue 19 decolouration by laccase immobilized on silica beads. ''Appl Microbiol Biotechnol''. Oct;77:819–823
 
-
 
-
[3]Chantale Cardinal-Watkins and Jim A. Nicell (2011)Enzyme-Catalyzed Oxidation of 17ß-Estradiol Using Immobilized Laccase from Trametes versicolor.'' Enzyme Research,'' vol. 2011, Article ID 725172, 11 pages
 
<html>
<html>
Line 640: Line 185:
__NOTOC__
__NOTOC__
-
==Liquid chromatography–mass spectrometry==
 
-
=== Dilution series ===
 
-
Our Substrates are soluble in Methanol. We set our standarts into a concentration of 1 mg mL<sup>-1</sup>. The detection limit for the LC-MS showed that a concentration of 10µg/l for the Substrates Esteron and Estradiol is the highest concentration of detection. Same limit of detection was used for Ethinyl estradiol and Anthracen for degradation. We only used thoose four Substrates. For all LC-MS preperations we used the ''T. versicolor'' Laccases. The dilution series were set in Methanol and 50%Acetonitril- 50% Water.
 
-
 
-
[[File:Bielefeld2012-calibrationcurve-Anthracen.jpg|thumb|350px|left|Figure 1: Anthracen calibration curve]]
 
-
[[File:Bielefeld2012-Estrone-calibrationcurve.JPG|thumb|350px|right|Figure 2: Estrone calibration curve]]
 
-
<br style="clear: both" />
 
-
 
-
=== Degradation results ===
 
-
The TVEL0 was able to degradate the synthetic estradiol (fig. 1) and we cannot say it for sure but also Anthracen (fig 3.). Our Ethinylestradiol calibration curve showed that it is stable in the media we used (fig 2.). Anthracen distingrates itself in the Britton Puffer but with Laccases there is less Anthracen measured in the LC-MS indicating our Laccase is able to degradate it (fig. 4). Estrone (fig. 5) and Estradiol (fig. 6) were degrade as well. On Estrone we could not identify any degradation products. The reason for this could be that the products are not detectable with LC-MS. We could identify peaks in the degradation of Estradiol but were not able to identify them. On the following figures you can see the results of our LC-MS measurments. The controls in different media showed no changes in concentration.
 
-
[[File:Bielefeld2012-Ethinylestradiol-degradation-LCMS.JPG|thumb|left|250px|Figure 1: Ethinylestradiol + TVEL0 measured by LC-MS. You can see that the over night sample has onyl half sub>2of the substrate left.]]
 
-
[[File:Bielefeld2012-Anthracen-degradation-LCMS.JPG|thumb|center|250px|Figure 3: Anthracen + TVEL0. In the over night sample there is undetacable less Anthracen.]]
 
-
[[File:Bielefeld2012-Estrone-degradation-LCMS.JPG|thumb|right|250px|Figure 5: Estrone + TVEL0. The peaks shows that Estrone is degradated but still the over night sample is still in the detection]]
 
-
<br>
 
-
[[File:Bielefeld2012-Ethinylestradiol-standart100.JPG|thumb|left|250px|Figure 2: Our Ethinylestradiol negative control without Laccase. Variation on the peaks is probably caused by an pipetting mistake.]]
 
-
[[File:Bielefeld2012-Anthracen-standart1.JPG|center|thumb|250px|Figure 4: The negative control for Anthracen without Laccases. As you can see the concentration of Anthracen goes down. This is caused by the Britton Puffer]]
 
-
[[File:Bielefeld2012-Estradiol-degradation-LCMS.JPG|thumb|right|250px|Figure 6: Estradiol degradation analyses with Massspectrometry. On the X-axis is listed the retention time. Y-axis the mass/charge ratio. From white to red is the intensity of the measured samples. On the figure above you can see the t0 Estradiol while the figure below shows the degradation. The analytes retendet in min 1 are the media soilling. Since we know that the retention time of Estradiol is on min 5 we could see that over night no more Estradiol is left and some other peaks appear which are probably degradation products]]
 
-
<br><br><br>
 
-
We also tried to measure the degradation with mass-spectrometry. Since quantification via mass-spectrometry is difficult to ionization of the analytes, we quantified our substrats by UV-light. Nevertheless, mass spectrometry enables identification of degradation products. We anaylzed estradiol degradation in detail (fig. 6) resulting in possible chemical compounds generated. Until now we can not say clearly how estradiol degradation functions, but with more time degradation products can maybe identified
 
-
<br style="clear: both" />
 
-
 
-
==High performance liquid chromatography==
 
-
==Dilution series==
 
-
[[File:Bielefeld2012_detectionlimit.JPG|200px|thumb|right|'''Figure 1.1:'''The detection range of ethinyl estradiol. Concentrations between 0.1 µg ml <sup>-1</sup> and 3 µg ml <sup>-1</sup> a/partinfo> in a Bioengineering NFL22 with a total volume of 6re detecable.]]
 
-
 
-
At first we mesured dilution series of all different substrates. While estradiol and ethinyl estradiol where easy to mesure, we didnt succed often with the estrone calibration curves. This was caused by its bad solubility. The retention time for estradiol is 5.8 minutes, for estrone 4.7 minutes and for ethinyl estradiol 5.2 minutes. For all estrogens we could use the same extinction and emmission values: Ex 230, Em 310.
 
-
 
-
<br style="clear: both" />
 
-
 
-
[[File:Bielefeld2012_EthinylEstradiol.jpg|350px|thumb|left|'''Figure 1.2:'''The calibration curve of ethinyl estradiol. Concentrations between 0.1 µg ml <sup>-1</sup> and 3 µg ml <sup>-1</sup>.]]
 
-
 
-
[[File:Bielefeld2012_Estradiol.jpg|350px|thumb|right|'''Figure 1.3:'''Calibration curve for estradiol.]]
 
-
 
-
<br style="clear: both" />
 
-
 
-
The next substrate class where the analgesics. These three substrates have different optimal extinction and emission values. Additional difficulties occured with naproxene and ibuprofen. Instead of one single peak we found two for each substrate, and none of them correlated with the used concentration. With diclofenac we are still not sure which extinction and emmission values are to use. We found different values and aditionaly we analysed it with a spectrofluorometer but this has also shown no clear peak for diclofenac.
 
-
 
-
Three of the four PAH´s have the same extinction and emmission values. Simular to the estrogens, the PAH calibration curves are easy to generate. Naphthalene has a retention time of 9.6 minutes and its detection range is also 0.1 to 2.5 µg*mL<sup>-1</sup>. Acenaphthene with a retention time of 15.1 minutes and phenantrene with a retention time of 17 minutes have maximal detectable concentration of 1.5 µg*mL<sup>-1</sup>.
 
-
 
-
Anthracene will be mesured later.
 
-
 
-
<br style="clear: both" />
 
-
 
-
==Negative controls==
 
-
 
-
[[File:Bielefeld2012_neg_pahs.png|350px|thumb|left|'''Figure 2.1:'''The PAH´s naphthalene,
 
-
acenaphthene and phenantrene in BR-buffer at 30 °C. The startconcentration was 1 µg mL <sup>-1</sup> for all PAH´s. After 1 houre nearly all PAH´s decayed completely.]]
 
-
 
-
[[File:Bielefeld2012_naphneg.png|350px|thumb|right|'''Figure 2.2:'''Naphthalene decay in four different conditions. Dissolved in methanol, dissolved in acetonitrile, with BR-buffer and with BR-buffer together with ABTS ]]
 
-
 
-
<br style="clear: both" />
 
-
 
-
The results of our negative controls of the first Polycyclic aromatic hydrocarbon, PAH, degradations showed, that PAH´s decay without laccase with a high speed. So we take a closer look at the three PAH´s in Britton Robinson (BR)-buffer. The result can be seen in figure 2.1. After one hour most of the used substrates decayed.
 
-
 
-
The next step was to check if and which substance cause the decay. In this test we dissolved naphthalene in acetonitrile and in methanol and compared the pure solvents with the influence of the BR-buffer and BR-buffer with ABTS. With pure methanol or acetonitrile naphthalene decays slow in comparison to BR-buffer. In BR-buffer with or without ABTS the decay happens faster and under nearly the same velocity. So BR-buffer seems to be a bad choice to test if our laccases degrade PAH´s.
 
-
 
-
Estradiol and ethinyl estradiol did not decay in BR-buffer, as shown by the negative controls in degradation experiments.
 
-
 
-
 
-
<br style="clear: both" />
 
-
 
-
==Degradation==
 
-
[https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Analytics#Sample_preparation/ Degradation experiments]
 
-
[[File:Bielefeld2012_EBT_ABTS.png|350px|thumb|left|'''Figure 3.1:'''Comparison between two of our laccases BPUL and ECOL with the purchased laccase TVEL0 under ABTS influence.]]
 
-
 
-
[[File:Bielefeld2012_TVEL0_EE.png|350px|thumb|right|'''Figure 3.2:'''Purchased laccase TVEL0 degrades ethinyl estradiol. Estradiol in BR-buffer without laccase as negative control.]]
 
-
<br style="clear: both" />
 
-
 
-
Degradation reactions with ABTS showed the expected results. "Team Activity Test" already showed, that the laccases have the ability to oxidise ABTS. The fact that oxidised ABTS reacts chemicaly with the substrates, explains that all of our active laccases have the ability to degrade ethinly estradiol and other substrates.
 
-
The potential of the purchased laccase TVEL0 is much higher, shown in figure 3.2.
 
-
BPUL has not the same potential as the purchased laccase. But BPUL degrades estradiol without the influence of ABTS.
 
-
 
-
[[File:Bielefeld2012_BPUL_Estradiol.png|350px|thumb|left|'''Figure 3.3:'''Our laccase BPUL in unknown concentration degrades estradiol. Estradiol in BR-buffer without laccase as negative control.]]
 
-
 
-
<br style="clear: both" />
 
-
 
-
==Outlook==
 
-
Anthracene, lindane and diclofenac are to be detected with the HPLC. Ibuprofen and naproxen need a good calibration curve.
 
-
For naphthalene, acenaphthene and phenantrene we have to test different buffers or lower the temperature too keep ist more stable.
 
-
We have only tested BPUL and ECOL so far. "Team Activity Test" showed that TTHL is active so we can test this laccase for the different substrates. Also there will be the trametis versicolor laccases TVEL5, TVEL10, TVEL13 and TVEL20.
 
-
Additional we want to determine kcat/km for the degradable substances. <br>
 
-
On the LC-MS we did not measure our Substrates with our self produced Laccases. If we had the opportunity, the would test our self produced Laccases with the Substrates. Besides we did not measure all Substrates they need to be measured as well to identify degradation products.
 
<html>
<html>
Line 738: Line 201:
</html>
</html>
__NOTOC__
__NOTOC__
-
 
-
==Introduction==
 
-
<div style="text-align:justify;">
 
-
In the field of cheap protein-extraction cellulose binding domains (CBD) have made themselfes a name. A lot of publications have been made, concerning a cheap strategy to capture a protein from the cell-lysate with a CBD-tag. Also enhanced segregation with CBD-tagged proteins have been observed. At this project the idea is different, the binding of our self-produced proteins to cellulose via a protein-domain-tag is taking advantage of the binding capacity of binding domains not only for purification reasons (it is still a great benefit), but also as an immobilizing-protocol for our laccases.
 
-
 
-
[[Image:Bielefeld2012 Osaka3.jpg|500px|thumb|right|Figure 1:Graphical sequence-alignment of <partinfo>K392014</partinfo> and the [http://www.ncbi.nlm.nih.gov/nuccore/AB041993 Xyn10A gene of C.josui]]]
 
-
To make a purification and immobilization-tag out of a protein domain, there are a lot of decisions and characterizations to get through.
 
-
 
-
Starting with the choice of the binding domain, the first limitation is accessibility. The first place to look at is, of course the [http://partsregistry.org Partsregistry]. A promising Cellulose binding motif of the ''C. josui'' Xyn10A gene (<partinfo>BBa_K392014</partinfo>) was found and ordered for the project right from the spot. After some research later concerning the sequence of that BioBrick it turned out that the part is not the CBD of the Xylanase as it should be, but the glycosyl hydrolase domain of the protein (Figure 1). This result made the part useless for the project ([http://partsregistry.org/Part:BBa_K392014:Experience complete review]) and it was the only binding domain in the [http://partsregistry.org Partsregistry] that fitted to the project.
 
-
 
-
Accessible organisms were searched via NCBI for binding-domains, -proteins and -motifs and work-groups were asked if they could help out. The results of the database research were only two chitin/carbohydate binding modules within the ''Bacillus halodurans'' genome (That stain was ordered for it's laccase <partinfo>BBa_K863020</partinfo>). One is in the [http://www.ncbi.nlm.nih.gov/nucleotide/289656506?report=genbank&log$=nuclalign&blast_rank=1&RID=0JPT9WMS01N Cochin chitinase gene] and the other in a [http://www.ncbi.nlm.nih.gov/protein/BAB05022.1 chitin binding protein].
 
-
 
-
[[Image:Bielefeld2012_p714.jpg|200px|thumb|left|Figure 2: Plasmid-map of p714 with CBDcex; Origin: Fermentation group of Bielefeld University]][[Image:Bielefeld2012_p570.jpg|220px|thumb|left|Figure 3: Plasmid-map of p570 with CBDclos; Origin: Fermentation group of Bielefeld University]]
 
-
 
-
Meanwhile the Fermentation group of our university group offered the use of two plasmids (p570 & p671), containing cellulose binding domains. The cellulose binding domain of the [http://www.ncbi.nlm.nih.gov/nucleotide/327179207?report=genbank&log$=nucltop&blast_rank=3&RID=152ZCN0E01N ''Cellulomonas fimi'' ATCC 484 exoglucanase gene] (CBDcex) and the cellulose binding domain of [http://www.ncbi.nlm.nih.gov/nuccore/M73817 ''Clostridium cellulovorans'' cellulose binding protein gene (cbp A)] (CBDclos). The decision was made to use these two domains. Staying within the cellulose binding domain-family and leave other protein domains like carbohydrate binding domains aside would keep the results comparable. Like changing to a different binding material would change the binding capacities of both domains in the same way. Also both are bacterial CBDs and no post-translational modification and glycosylation had to be dealt with.
 
-
 
-
To get to know more about these two domains, their properties and their proteins NCBI wasconsulted and the [http://blast.ncbi.nlm.nih.gov/ BLAST]-tool was used to identify the cellulose binding domains and ExPASy-tools were used for further measurements.
 
-
<br><br>
 
-
 
-
[[Image:Bielefeld2012_pfam00553.jpg|150px|thumb|left|Figure 5: Predicted structure of the CBM_2-family made with Cn3D]]
 
-
[[Image:Bielefeld2012_cfimiexo.jpg|500px|thumb|right|Figure 6: Protein-BLAST of [http://www.ncbi.nlm.nih.gov/nucleotide/327179207?report=genbank&log$=nucltop&blast_rank=3&RID=152ZCN0E01N ''Cellulomonas fimi'' ATCC 484 exoglucanase gene]]]
 
-
 
-
The CBD of the Cellulomonas fimi ATCC 484 exoglucanase gene (Figure 6) is a 100 amino acid long domain, close to the C-terminal ending of the protein with a theoretical pI of 8.07 and a molecular weight of 10.3 kDa. It is classified to be stable and belongs to the Cellulose Binding Modul family 2 (pfam00553/cl02709;Figure 5). This means two tryptophane residues are involved in cellulose binding, this type of CBD is only found in bacteria. Also a CBM49 Carbohydrate binding domain is found within the protein domain, where [http://www.ncbi.nlm.nih.gov/pubmed/17322304?dopt=Abstract binding studies] have shown, that it binds to crystalline cellulose, which could be a possible target for immobilization.
 
-
 
-
[[Image:Bielefeld2012_ccellubp.jpg|450px|thumb|left|Figure 7: Protein-BLAST of [http://www.ncbi.nlm.nih.gov/nuccore/M73817 ''Clostridium cellulovorans'' cellulose binding protein gene (cbp A)]]]
 
-
[[Image:Bielefeld2012_pfam00942.jpg|150px|thumb|right|Figure 8: Predicted structure of the CBM_3-family made with Cn3D]]
 
-
 
-
The CBD of the [http://www.ncbi.nlm.nih.gov/nuccore/M73817 ''Clostridium cellulovorans'' cellulose binding protein gene (cbp A)] on the other hand is a N-terminal domain with 92 amino acids, theoretical pI of 4.56 and is also classified as stable. It belongs to the Cellulose Binding Module family 3 (pfam00942/cl03026; Figure 8) and is part of a very large cellulose binding protein with four other carbohydrate binding modules and a lot of docking interfaces for the proteins in its amino acid sequence (Figure 7).
 
-
 
-
==The Binding Assay==
 
-
 
-
[[image:Bielefeld2012_GFP.jpg|300px|thumb|right|Aequorea victoria green fluorescent protein in action]]
 
-
To measure the capacity and strength of the bonding between the cellulose binding domains and different types of cellulose many different assays have been made. One of the simplest and most often used is the fusion of the CBD to a reporter-protein, especially [http://www.ncbi.nlm.nih.gov/pubmed/22305911a green or red fluorescent protein (GFP/RFP)] is very common. The place of the CBD is measured through the fluorescence of the fused GFP and quantification can easily been done.
 
-
 
-
[http://www.ncbi.nlm.nih.gov/pubmed/18573384 Protocol]:
 
-
* Harvest the ''E coli''-cells producing the fusion-protein of CBD and GFP and centifuge 10 minutes at top speed.
 
-
* Re-suspend the cell-pellet in 50 mM Tris-HCl-Buffer (pH 8.0).
 
-
* Break down cells via sonication.
 
-
* Centrifuge at top speed for 20 minutes to get rid of the cell-debris.
 
-
* Take the supernatant and measure the emission at 511 nm (excitation at 501 nm) (<partinfo>E0040</partinfo>)
 
-
* Mix a definite volume of lysate with a definite volume or mass of e.g. crystalline cellulose (CC) or reactivated amorphous cellulose (RAC)
 
-
* Wait 15 (RAC) to 30 (CC) minutes
 
-
* Take supernatant and measure the emission at 511 nm again.
 
-
* The difference between the first an the second measurement is the relative quantity of what has bound to the cellulose.
 
-
==Cloning of the Cellulose Binding Domains==
 
-
 
-
The cloning of the CBDs should fit to the cloning of our laccases, so the BioBricks were designed with a T7-promoter and the B0034 RBS to have a similar method of cultivation. After investigating the restriction-sites it showed, that at least for the characterization of the CBDs a quick in-frame assembly of the CBDs and a GFP would be possible, because neither the CBDs nor the GFP (<partinfo>I13522</partinfo>) of the Partsregistry inherits a ''Age''I- or ''Ngo''MIV-site, which makes Freiburg-assembly possible. To do so, [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Primers primers] for the constructs <partinfo>BBa_K863101</partinfo> (CBDcex(T7)), carrying the CBDcex domain from the ''C. fimi'' exoglucanase and <partinfo>BBa_K863111</partinfo> (CBDclos(T7)), carrying the CBDclos domain from the ''C.cellulovorans'' binding protein were designed. The protein-BLAST of the two CBDs gave an exact picture of which bases belong to the binding domains and which don't. To be sure not to disturb the folding anyway 6 to 12 bases up and downstream of the domains as conserved sequences were kept. Even if the [http://partsregistry.org/Part:BBa_K863101 CBDcex]is an C-terminal domain both domains were made N-terminal, so the BioBricks can carriy all regulatory parts and the linked protein can easily be exchanged. This also would be nice for other people using this part.
 
-
 
-
<center>
 
-
{|class="wikitable"
 
-
| CBDcex_T7RBS|| 80 || TGAATTCGCGGCCGCTTCTAGAGTAATACGACTCACTATAGGGAAAGAGGAGAAATAATGGGT<br />CCGGCCGGGTGCCAGGT
 
-
|-
 
-
| CBDcex_2AS-Link_compl || 56 || CTGCAGCGGCCGCTACTAGTATTAACCGGTGCTGCCGCCGACCGTGCAGGGCGTGC
 
-
|-
 
-
| CBDclos_T7RBS || 73 || CCGCTTCTAGAGTAATACGACTCACTATAGGGAAAGAGGAGAAATAATGTCAGTTGAATTTTACAACTCTAAC
 
-
|-
 
-
| CBDclos_2ASlink_compl|| 63 || CTGCAGCGGCCGCTACTAGTATTAACCGGTGCTGCCTGCAAATCCAAATTCAACATATGTATC
 
-
|}
 
-
</center>
 
-
 
-
The listed complementary primers added, besides the Freiburg-suffix, a two amino acid Glycine-Serine-linker to the end of the CBDs. This is a very short linker, but as GFP-experts and [http://www.ncbi.nlm.nih.gov/pubmed/17394253 publications] described GFP and CBDs are very stable proteins and should cope with a very short linker. The benefit of a short linker is that protease activity is kept minimal.
 
-
 
-
The GFP <partinfo>K863121</partinfo> used in the assay was an alternated version of the <partinfo>BBa_I13522</partinfo>. The [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#Primers primers] that were made added a Freiburg-pre- and suffix to the GFP coding sequence and a His-tag to the C-terminus to get it purified for the measurements. This part <partinfo>BBa_K863121</partinfo> (GFP_His) should be easily added to the CBDs and assembled to the fusion-proteins <partinfo>BBa_K863103</partinfo> CBDcex(T7)+GFP_His] and <partinfo>BBa_K863113</partinfo> CBDclos(T7)+GFP_His]).
 
-
 
-
<center>
 
-
{|class="wikitable"
 
-
| GFP_Frei || 54 || TACGGAATTCGCGGCCGCTTCTAGATGGCCGGCATGCGTAAAGGAGAAGAACTT
 
-
|-
 
-
| GFP_His6_compl || 74 || CTGCAGCGGCCGCTACTAGTATTAACCGGTGTGATGGTGATGGTGATGTTTGTATAGTTCATCCATGCCATGTG
 
-
|}
 
-
</center>
 
-
 
-
Since a His-tag was added to the end of the GFP, an alternated version of the <partinfo>BBa_I13522</partinfo> had to be made to compare binding of GFP with and without CBD. Therefore a forward primer was made, to amplify the whole <partinfo>BBa_I13522</partinfo> with the GFP_His_compl-primer to add the His-tag to the C-terminus.
 
-
 
-
<center>
 
-
{|class="wikitable"
 
-
| GFP_FW_SV || 39 || acgtcacctgcgtgtagctCGTAAAGGAGAAGAACTTTT
 
-
|}
 
-
</center>
 
-
Due to bad cleavage efficiency at the ''Pst''I restriction-site in nearly all PCR-products the cloning of the CBDs ([http://partsregistry.org/Part:BBa_K863102 CBDcex(T7)] and [http://partsregistry.org/Part:BBa_K863112 CBDclos(T7)])and especially the insertion of [http://partsregistry.org/Part:BBa_K863121 GFP_His] to the CBDs took a lot more time as expected. This was because, while designing the primers, it was missed to add additional base pairs from the cleavage-site to the termini to increase the efficiency to standard. When the problem was disclosed, cloning got a lot quicker and more successful.
 
-
 
-
As the project went on and the T7-constructs didn't seem to work one suspected reason was that a stop codon (TAA) that accidentally resulted between the RBS and ATG could be the reason for that. To solve the problem a change to a constitutive promoter (<partinfo>BBa_J61101</partinfo>) was made now and then using the Freiburg-assembly. Therefore Freiburg forward primers for the CBDs were made.
 
-
<center>
 
-
{|class="wikitable"
 
-
| CBDcex_Freiburg-Prefix|| 54 || GCTAGAATTCGCGGCCGCTTCTAGATGGCCGGCGGTCCGGCCGGGTGCCAGGTG
 
-
|-
 
-
| CBDclos_Freiburg-Prefix || 57 || GCTAGAATTCGCGGCCGCTTCTAGATGGCCGGCTCATCAATGTCAGTTGAATTTTAC
 
-
|}
 
-
</center>
 
-
The second advantage of these primers were, that the order of the fusion proteins could easily been changed, when a Freiburg suffix-primer for the GFP would be available, so it was ordered.
 
-
<center>
 
-
{|class="wikitable"
 
-
| GFP_Freiburg_compl || 61 || ACGTCTGCAGCGGCCGCTACTAGTATTAACCGGTTTTGTATAGTTCATCCATGCCATGTGT
 
-
|}
 
-
</center>
 
-
[[File:Bielefeld2012_S3N10linker.jpg|500px|thumb|right|PCR-product of BBa_K863104 with S3N10-primers]]
 
-
Sadly the primers arrived just a few days before wiki freeze and we had no time to test that. The switching to the constitutive promoter had no obvious effect (no green colonies or culture). Changing the expression strain from ''E. coli'' KRX to ''E. coli'' BL21 didn't do a positive effect ether. Which led to the conclusion, that besides further information the problem has to be the space in between the two proteins and the CBD and GFP must hamper each other from folding correctly. To test and solve this a very long linker with three serines followed by ten asparagines should be assembled in the already existing parts via a blunt end cloning. This also is right at hand, just wasn't successful in the time which was left.
 
-
<center>
 
-
{|class="wikitable"
 
-
| S3N10_Cex_compl || 40 || TTGTTGTTGTTCGAGCTCGAGCCGACCGTGCAGGGCGTGC
 
-
|-
 
-
| S3N10_Clos_compl || 40 || TTGTTGTTGTTCGAGCTCGAGCTGCCGCCGACCGTGCAGG
 
-
|-
 
-
| S3N10_GFP || 40 || CAATAACAATAACAACAACCGTAAAGGAGAAGAACTTTTC
 
-
|}
 
-
</center>
 
-
 
-
== Literature ==
 
-
Kavoosi ''et al.'' (2007) Strategy for selecting and characterizing linker peptides for CBM9-tagged fusion proteins expressed in Escherichia coli. ''Biotechnol Bioeng.'' Oct 15;98(3):599-610.
 
-
Urbanowicz ''et al.'' (2007) A tomato endo-beta-1,4-glucanase, SlCel9C1, represents a distinct subclass with a new family of carbohydrate binding modules (CBM49). ''J Biol Chem.'' Apr 20;282(16):12066-74. Epub 2007 Feb 23.
 
-
Sugimoto ''et al.'' (2012) Cellulose affinity purification of fusion proteins tagged with fungal family 1 cellulose-binding domain. ''Protein Expr Purif.'' Apr;82(2):290-6. Epub 2012 Jan 28.
 
-
Hong ''et al.'' (2008) Bioseparation of recombinant cellulose-binding module-proteins by affinity adsorption on an ultra-high-capacity cellulosic adsorbent. ''Anal Chim Acta.'' Jul 28;621(2):193-9. Epub 2008 May 27.
 
-
</div>
 
Line 876: Line 226:
</html>
</html>
-
== Description of the shuttle vector system ==
 
-
The design of a minimal shuttle vector system with defined regions (or better DNA fragments) for expression and secretion of proteins of interest (POI) like laccase which needed glycolisation is the basic concept. The shuttle vector needs a bacterial part for cloning in bacteria (like E. coli) and an eucaryotic part for genomic integration and selection in yeast (like ''P. pastoris''). For other teams it is able to clone in frame their POI via the AarI restriction site. With only one restriction-ligation-cloning step the shuttle vector will be ready to use and integrate in the eucaryote ''P. pastoris''.
 
-
 
-
The shuttle vector consists of the plasmid pSB1C3, 5' UTR of alcohol oxidase 1 gene (''aox1'') containing the ''aox1'' promoter region, Kozak sequence, mating factor alpha 1 (MFalpha1), AarI restriction site, ''aox1'' terminater, ''his4'' gene and 3' UTR of ''aox1'' gene. Cloning and plasmid replication in ''E. coli'' is able via the pSB1C3 part.  The protein of interest (like laccase) can be included in frame with MFalpha1 via AarI restriction site. With the N-terminal MFalpha1 the POI could be secreted in the media. Genomic intregation of MFalpha1-taged POI is able via the 5' UTR and 3' UTR of the ''aox1'' gene. This allows a double cross over and the genomic integration without any bacterial proportion of DNA which could be a decisive point for industrial application. The complementation of histidine auxotrophie via ''his4'' gene is choosen instead of a zeocine resistance. This selection strategy is choosen because we want to avoid the application of antibiotics as many as possible.
 
-
 
-
Gibson assembly is used for building the shuttle vector (see the figure below) and the fragments with 5' overlap were amplified via PCR. In addition, die fragments were designed as basic BioBrick parts for use. The origin of the DNA sequence for design of the shuttle vector and the source of DNA for PCR is listed in the table below.
 
-
 
-
'''Elements of the shuttle vector and their origin'''
 
-
 
-
{|class="wikitable" style="text-align: center; width: 300px: height: 300px;" border=0}
 
-
 
-
! Element
 
-
! Origin of DNA sequence of design
 
-
! Origin of DNA sequence of PCR
 
-
 
-
|-
 
-
|[http://partsregistry.org/Part:pSB1C3 pSB1C3]
 
-
|[http://partsregistry.org/Part:pSB1C3 pSB1C3]
 
-
|[http://partsregistry.org/Part:pSB1C3 pSB1C3]
 
-
|-
 
-
|[http://partsregistry.org/Part:BBa_K863200 5'UTR of ''aox1'']
 
-
|[http://products.invitrogen.com/ivgn/product/V19520 plasmid pPICZalphaA (Invitrogen)]
 
-
|''P. pastoris'' wild type X-33
 
-
|-
 
-
|Kozak sequence
 
-
|[http://partsregistry.org/wiki/index.php?title=Part:BBa_J63003 BBa_J63003]
 
-
|integrated in primer sequence
 
-
|-
 
-
|[http://partsregistry.org/Part:BBa_K863203 MFalpha1]
 
-
|[http://products.invitrogen.com/ivgn/product/V19520 plasmid pPICZalphaA (Invitrogen)]
 
-
|[http://products.invitrogen.com/ivgn/product/V19520 plasmid pPICZalphaA (Invitrogen)]
 
-
|-
 
-
|[http://partsregistry.org/Part:BBa_K863203 ''aox1'' terminater]
 
-
|[https://products.invitrogen.com/ivgn/product/V17520 plasmid pPIC9K]
 
-
|''P. pastoris'' wild type X-33
 
-
|-
 
-
|[http://partsregistry.org/Part:BBa_K863202 ''his4'']
 
-
|[https://products.invitrogen.com/ivgn/product/V17520 plasmid pPIC9K]
 
-
|''P. pastoris'' wild type X-33
 
-
|-
 
-
|[http://partsregistry.org/Part:BBa_K863201 3'UTR of ''aox1'']
 
-
|[https://products.invitrogen.com/ivgn/product/V17520 plasmid pPIC9K]
 
-
|''P. pastoris'' wild type X-33
 
-
|-
 
-
|}
 
-
 
-
 
-
[[File:Bielefeld2012_PECPP11JS.JPG|thumb|400px|right|Plasmid map from shuttle vector pSB1C3::BBa_K863204.]]
 
-
 
-
== Shuttle vector in ''E. coli'' ==
 
-
The developed shuttle vector could transformed in ''E. coli'' and analyzed by restriction with the enzymes [[Team:Bielefeld-Germany/Protocols/Materials#Used_enzymes | ''Pvu''II]] and [[Team:Bielefeld-Germany/Protocols/Materials#Used_enzymes | ''Hind''III]]. The restriction pattern is positiv. A [http://partsregistry.org/cgi/partsdb/dna.cgi?part_name=BBa%20K863204 sequencing] was also done.
 
-
 
-
== Shuttle vector in ''P. pastoris'' ==
 
-
After linearization by restriction with [[Team:Bielefeld-Germany/Protocols/Materials#Used_enzymes | ''EcoR''I]] and [[Team:Bielefeld-Germany/Protocols/Materials#Used_enzymes | ''Spe''I]] the shuttle vector could be transformed in competent ''P. pastoris'' cells. On selective media plates for complementation of histidine auxotrophy some transformants growth (see the picture below). For differentiation between the M<sup>+</sup> and M<sup>s</sup> genotype a PCR with the Primer [[Team:Bielefeld-Germany/Protocols/Materials#Primers | 5AOX-Genotyp-FW]] and [[Team:Bielefeld-Germany/Protocols/Materials#Primers | TT-Genotyp-RV]] was done.
 
-
 
-
== GFP integrated in shuttle vector ==
 
-
Cloning of green fluorescent protein (GFP) via the ''Aar''I restriction site into the shuttle vector was done for testing the system. A restriction analyze with enzymes ans a sequencing could not be done. The next steps will be (a) linearization with ''EcoR''I and ''Spe''I restriction enzymes, (b) transformation in competent ''P. pastoris'' cells, (c) genotype characterization by PCR with 5AOX-Genotype-FW and TT-Genotype-RV primers, (d) cultivation with methanol induction for GFP production and at last (e) fluorescence measure of the cultivation broth.
 
Line 953: Line 246:
__NOTOC__
__NOTOC__
-
==Introduction==
 
-
<div style="text-align:justify;">
 
-
In Munich at the [https://2012.igem.org/Team:Bielefeld-Germany/Human_Practices/CAS_conference CAS conference] we met the iGEM team [https://2012.igem.org/Team:University_College_London UCL London] for the first time. Discussing about the different projects, a common ground was found. Since the UCL team also produces laccases, but for a different approach,  a collaboration has been delevoped.  The idea was that each team will characterize the laccase(s) of the other team, to reproduce the results. Therefore the plasmids containing the BioBrick were exchanged. The iGEM UCL London characterized the BioBrick <partinfo>K863005</partinfo> and we characterized <partinfo>K729002</partinfo>. The same laccase CueO from ''E. coli'' BL21 (DE3), but different expression vectors and chassis were used by both teams. Therefore the established methods for production and cell disruption had to be discussed and adjusted.  For the characterization of the activity, each team used its own method.
 
-
For the characterization, the BioBrick <partinfo>K729002</partinfo> was sequenced. It was produced in ''E. coli'' KRX and a growth kinetic determined. Furthermore a SDS-PAGE as well as an activity test was made.
 
-
</div>
 
-
 
-
==Sequencing analysis==
 
-
<div style="text-align:justify;">
 
-
For the improvement of the data collection, the BioBrick of the [https://2012.igem.org/Team:University_College_London University&nbsp;College&nbsp;London] iGEM team was sequenced. The sequence analysis shows, that the analyzed BioBrick is equal to the sequence published in the partsregistry (see figure 1). Then it was proved if the BioBrick is coding for the ''E. coli'' laccase CueO. Therefore the sequence was blasted against CueO from ''E. coli'' BL21 (DE3). It matched with 100 %.
 
-
[[File:Bielefeld2012_Sequencher.png|700px|thumb|center|'''Figure 1:''' A short part of the sequencing analysis results of the BioBrick<partinfo>K729002</partinfo> ]]
 
-
</div>
 
-
 
-
==Cultivation==
 
-
<div style="text-align:justify;">
 
-
[[File:Bielefeld2012_Wachstumskinetik_pLondon.jpg|450px|thumb|left| '''Figure 2:''' Comparison of the cultivated ''E. coli'' KRX  and ''E. coli'' KRX containing <partinfo>K729002</partinfo> cultivations. The OD<html><sub>600</sub></html> was measured every hour for 12&nbsp; h]]
 
-
 
-
''E.&nbsp;coli'' KRX was transformed with the  BioBrick <partinfo>K729002</partinfo> of the iGEM team of University College of London. The cells were characterized by the growth kinetics and activity test. 
 
-
''E.&nbsp;coli'' KRX containing <partinfo>K729002</partinfo> was cultivated in [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Materials#LB_medium LB-medium] with a total volume of  60&nbsp;mL  for 12&nbsp;h at 37&nbsp;°C (120&nbsp;rpm) in 250&nbsp;mL shaking flasks without baffles. To produce a higher amount of the protein, we also cultivated a total volume of 200&nbsp;mL in a 1&nbsp;L shaking flask without baffles. The OD<html><sub>600</sub></html> values were determined every hour. To measure the influence of the transfered BioBrick on the growth of the cells, a negative control (''E.&nbsp;coli'' KRX) was cultivated identically.
 
-
 
-
In figure 2 the OD<sub>600</sub> of ''E.&nbsp;coli'' KRX containing <partinfo>K729002</partinfo> and of the negative control ''E.&nbsp;coli'' KRX were plotted. As expected the ''E. coli'' KRX containing <partinfo>K729002</partinfo> grew slower than the negative control. This can be explained by the protein expression.
 
-
 
-
The cells were harvested and centrifuged after 12&nbsp;h. The pellets were resuspended in 100&nbsp;mM Na-Acetat-buffer, lysed by [https://2012.igem.org/Team:Bielefeld-Germany/Protocols/Production#Mechanical_lysis sonification] and centrifuged. The supernatant was analysed by SDS-PAGE and activity assay.
 
-
</div>
 
-
<br style="clear: both" />
 
-
 
-
==SDS-PAGE==
 
-
<div style="text-align:justify;">
 
-
[[File:Bielefeld2012_0924.jpg|300px|thumb|left|'''Figure 3:''' SDS-PAGE of the lysates of ''E. coli'' KRX with <partinfo>BBa_K729006</partinfo>, ''E. coli'' KRX (negative control) and with <partinfo>BBa_K863005</partinfo> (positive control). ECOL has a molecular weight of 53.4 kDa. ]]
 
-
 
-
In figure 3 the SDS-PAGE of the lysates of ''E. coli''KRX with <partinfo>BBa_K729006</partinfo>, ''E. coli'' KRX (negative control) and furthermore of ''E. coli'' KRX with <partinfo>BBa_K863005</partinfo> treated the same way are shown. No clear distinction between the samples is possible. By comparing the bands at 53.4 kDa, the molecular weight of CueO, a small difference of the bandintesity can be suspected. It seems, that the ''E. coli'' KRX containig <partinfo>BBa_K863005</partinfo> has a slightly stronger band. The bands at 53.4 kDa were picked and prepared for MALDI-TOF analysis.
 
-
</div>
 
-
<br style="clear: both" />
 
-
 
-
==Activity Tests==
 
-
<div style="text-align:justify;">
 
-
Activity tests were done by using 198 µL of the sample (supernatant of the lysed cells containing <partinfo>K729002</partinfo> and <partinfo>K863005</partinfo>) and 2 µL ABTS (20 mM ABTS stock). Since laccases are capable of oxidizing ABTS  the activity of laccases can be detected through measuring the absorption of oxidized ABTS at 420 nm. As positive control a ''E. coli'' KRX strain containing <partinfo>K863005</partinfo>, which already has been [https://2012.igem.org/Team:Bielefeld-Germany/Results/Summary#4 characterized] by the team, was measured too. Using this approach there was no detectable activity over a period of 40 minutes (see figure 4). To gain activity the samples were incubated with 0.4 mM CuCl<html><sub>2</sub></html> for at least 2 hours. After incubation time  another setting was started using 198 µL of the samples containing <partinfo>K729002</partinfo> and <partinfo>K863005</partinfo> and applied 0.1 mM ABTS. The measurements lasted for 5 hours but the results did not show a decrease in oxidized ABTS again (see figure 5). A possible reason can be contaminants in the samples, e.g. salts, low molecular agents, that could affect the activity of the tested laccases. The samples were rebuffered into deionized H<sub>2</sub>O using HiTrap Desalting Columns and then again incubated with 0.4 mM CuCl<html><sub>2</sub></html> for 2 hours. This time the measurement setup differed because no buffer remained in the samples. The new measurements were done with 100 mM sodium acetate buffer (pH 5), 158 µL sample and 0.01 mM ABTS for 5 hours at a temperature of 25°C. This preparation of the samples led to oxidizing activity of the laccases and therefore to an increase in oxidized ABTS (see figure 6). After 5 hours both laccases, <partinfo>K729002</partinfo> and <partinfo>K863005</partinfo>, showed great activity and had oxidized ~8 µM ABTS. Since both laccases derive from the same organism they both show a similar reaction behavior.
 
-
</div>
 
-
<center>
 
-
[[File:Bielefeld2012_London_ohnecu_mitsalz.jpg|240px|left|thumbnail|'''Figure 4:''' Activity measurement of <partinfo>K729002</partinfo> and <partinfo>K863005</partinfo> using ABTS over a time period of 40 minutes. No increase in oxidized ABTS is distinguishable.]]
 
-
[[File:Bielefeld2012_London_cu.jpg|240px|left|thumbnail|'''Figure 5:''' Activity measurement of <partinfo>K729002</partinfo> and <partinfo>K863005</partinfo> after a 2 hour incubation with 0.4 mM CuCl<sub>2</sub> using ABTS over a time period of 5 hours. No activity of both laccases can be detected since there is no increase in oxidized ABTS.]]
 
-
[[File:Bielefeld2012_London_umgepuffert_cu.jpg|240px|left|thumbnail|'''Figure 6:''' Activity measurement of <partinfo>K729002</partinfo> and <partinfo>K863005</partinfo> after desalting and a 2 hour incubation with 0.4 mM CuCl<sub>2</sub> using ABTS over a time period of 5 hours. A considerable increase in oxidized ABTS is noticeable. After 5 hours both laccases were capable of oxidizing 8 µM ABTS.]]
 
-
</center>
 
<html>
<html>
</div>
</div>
-
</div>
 
-
<div id="navresultunten" class="tabs">
 
-
<div class="scroller">
 
-
<ul style="list-style-type:none">
 
-
<li><a href="#1"><strong>Summary</strong></a></li>
 
-
<li><a href="#2"><strong>Datapage</strong></a></li>
 
-
<li><a href="#3"><strong>BPUL</strong></a></li>
 
-
<li><a href="#4"><strong>ECOL</strong></a></li>
 
-
<li><a href="#5"><strong>TTHL</strong></a></li>
 
-
        <li><a href="#6"><strong>BHAL</strong></a></li>
 
-
<li><a href="#7"><strong>TVE??</strong></a></li>
 
-
<li><a href="#8"><strong>Immobilization</strong></a></li>
 
-
<li><a href="#9"><strong>Substrate Analytics</strong></a></li>
 
-
<li><a href="#10"><strong>CBD</strong></a></li>
 
-
<li><a href="#11"><strong>Shuttle vector</strong></a></li>
 
-
        <li><a href="#12"><strong>Collaboration with UCL</strong></a></li>
 
-
</ul>
 
-
  </div>
 
</div>
</div>
-
<script>
+
 
-
$(function() {
+
-
+
-
+
-
$("#navresultunten ul").tabs("#panesresult > div", {effect: 'fade', fadeOutSpeed: 400});
+
-
});
+
-
</script>
+

Revision as of 17:23, 26 September 2012

Results

Summary

Cultivation and Purification of the different laccases

During our research we cultivated the following BioBricks and produced several laccase. To simplify the presentation of our results we named the produced laccase like the following system

Produced and generated BioBricks with the source strain of the DNA-sequence, promoter, protein name and the names given by the iGEM Team Bielefeld
BioBrick code strain promoter name of protein name given by the iGEM Team
<partinfo>K863000</partinfo> Bacillus pumilus DSM 27 T7 promoter CotA BPUL
<partinfo>K863005</partinfo> E. coli BL21(DE3) T7 promoter CueO ECOL
<partinfo>K863010</partinfo> Thermus thermophilus HB27 T7 promoter tthL TTHL
<partinfo>K863012</partinfo> Thermus thermophilus constitutive promoter (<partinfo>BBa_J23100</partinfo>) tthL TTHL
<partinfo>K863015</partinfo> Xanthomonas campestris pv. campestris B100' T7 CopA XCCL
<partinfo>K863020</partinfo> Bacillus halodurans C-125 T7 Lbh1 BHAL
<partinfo>K863022</partinfo> Bacillus halodurans C-125 constitutive promoter (<partinfo>BBa_J23100</partinfo>) Lbh1 BHAL


All BioBricks of the iGEM Team Bielefeld were screened to identify the best conditions for protein expression. The first trials were made by shaking flask cultivations with different parameters. These parameters were various shaking flask designs , different temperatures, different concentrations of chloramphenicol, various induction strategies , several cultivation times and some cultivations in absence or presence of CuCl2. To detect the produced laccases different analysis methods were performed like SDS-PAGE analysis as well as MALDI-TOF.





Datapage


How our system works

Data for our favorite new parts

  1. <partinfo>K863000</partinfo> - bpul (laccase from Bacillus pumilus) with T7 promoter, RBS and HIS tag:
  2. <partinfo>K863005</partinfo> - ecol (laccase from E. coli) with T7 promoter, RBS and HIS tag:

Data for pre-existing parts

We have also characterized the following parts

  1. <partinfo>BBa_K863012</partinfo> - tthl laccase (from T. thermophilus) with constitutive promoter J23100, RBS and HIS tag:
  2. <partinfo>BBa_K863022</partinfo> - bhal laccase (from Bacillus halodurans) with constitutive promoter J23100, RBS and HIS tag:

Immobilization


Subtrate Analytics


Cellulose binding domain



Shuttle vector

A shuttle vector for recombination into the yeast P. pastoris could be developed. With this system it is possible to recombine a protein of interest with a N-terminal mating factor alpha 1 for secretion the protein in the media. This protein of interest could be cloned in frame with one restiction-ligate-cloning-step. The selection depends not on an antibiotic resistance like zeocine, but on a complementation of histidine auxotrophy.




Collaboration with UCL

The BioBrick [http://partsregistry.org/wiki/index.php?title=Part:BBa_K729002 BBa_K729002] from the University College London was characterized by us. Therefore E. coli KRX containing [http://partsregistry.org/wiki/index.php?title=Part:BBa_K729002 BBa_K729002] and E. coli KRX as negative control were cultivated in shaking flasks and a growth kinetic was determined. The harvested cells were lysed via sonification and the supernatant was purified from substances with a low molecular weight. After purification it was analyzed by SDS-PAGE, activity assay as well as MALDI-TOF. For a comparison E. coli KRX containing [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863005 BBa_K7863005] was cultivated and also analysed by SDS-PAGE and activity assay. [http://partsregistry.org/wiki/index.php?title=Part:BBa_K729002 BBa_K729002] and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K863005 BBa_K7863005] showed a similar behaviour in oxidizing ABTS.




55px Logo merck.jpg BioCircle.JPG Bielefeld2012 Evonik.jpg Bielefeld2012 Baxter.png Logo knauer.jpg Logo iit.jpg Bielefeld2012 BIEKUBA.jpg Logo biometra.jpg Logo bio-nrw.png Bielefeld2012 Logo ERASynbio.jpg

About our Wiki

Fifteen students from different fields of study from the Bielefeld University aspired to complete a project called TOXIC COMPOUNDS IN NATURAL WATER - A CASE FOR LACCASE. In his Wiki we document our achievements and our approach.

Contact Us

Universität Bielefeld
Universitätsstraße 25
D-33615 Bielefeld

info(at)igem-bielefeld.de

Navigate our Wiki

Start

Team

Project

Results

Since Regionals

Human Practice

Safety

Judging

Partner

Retrieved from "http://2012.igem.org/Team:Bielefeld-Germany/Results/Summary"