Team:TU Munich/Notebook/Labjournal

From 2012.igem.org

Revision as of 15:18, 17 October 2012 by Simon Heinze (Talk | contribs)


Display:
Vector Design
Limonene
Xanthohumol
Thaumatin
Caffeine
Constitutive promoter
Light-switchable promoter
Ethanol-inducible promoter
Genome integration

Expand All ...
Collapse All ...

You can also click on individual experiments to show/hide them
Jump to:
Week 1 13.6-17.6
Week 2 18.6-24.6
Week 3 25.6-1.7
Week 4 2.7-8.7
Week 5 9.7-15.7
Week 6 16.7-22.7
Week 7 23.7-29.7
Week 8 30.7-5.8
Week 9 6.8-12.8
Week 10 13.8-19.8
Week 11 20.8-26.8
Week 12 27.8-2.9
Week 13 3.9-9.9
Week 14 10.9-16.9
Week 15 17.9-23.9
Week 16 24.9-27.9
1 kbp GeneRuler:

100 bp GeneRuler:

PageRuler Plus:

Labjournal


P1-923 and PCR1-73 are the tube numbers for plasmids/PCR products from our inventory list (most of the descriptions are in german)

For a shorter summary of what happened each week, see our meeting protocols.

Week 1

Wednesday, June 13th

Exchange of the Multiple Cloning Site of pTUM104

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pTUM104

Hybridisation of the primers O1 with O2 and O3 with O4

Primer preparation:

  • centrifugation
  • dilution in the denoted quantity in bidest. water (concentration = 100 pmol/µl)
  • centrifugation

Hybridisation:

volume reagent
34 µl ddH2O
5 µl PNK-buffer
2.5 µl Primer O1
2.5 µl Primer O2
1 µl PNK (10mM)
volume reagent
34 µl ddH2O
5 µl PNK-buffer
2.5 µl Primer O3
2.5 µl Primer O4
1 µl PNK (10mM)
  • 30 min 37 °C
  • 10 min 80 °C
  • put the Thermo Block with the mixture in a styrofoam box and let it cool down over night

Thursday, June 14th

Exchange of the Multiple Cloning Site of pTUM104

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pTUM104

Digestion of pTUM104 with HindIII and XbaI

volume reagent
12 µl Miniprep (pYES2 SH 1.7.3 with a concentration of 87.8 ng/µl)
5 µl NEB2
5 µl 10x BSA
2 µl XbaI (10 U/µl)
2 µl HinIII (10U/µl)
24 µl ddH2O

Incubation: 37 °C, 1.75 h

DNA preparative gel electrophoresis

  • gel: 1% with LMP-agarose
  • band 1: 10 µl DNA ladder (1kb)
  • band 2: 50 µl probe + 5 µl loading dye
  • 70 V, 90 min

TUM12 pYES2digested.jpg

Gelextration

  • cut the bands (5.7-5.8 kb) and split it in two eppis
    • m1=165.3 mg
    • m2=211.1 mg
  • QIAquick Gel Extractrion Kit
    • eppi1: 495.9 µl QG-buffer
    • eppi2: 633.3 µl QG-buffer
    • step 6 was left out
    • step 9: 30µl buffer, 4 min incubation
  • the product was named P5

Transformation of plasmids from Prof. Schwab in E.coli XL-1 Blue

Investigator: Lara, Andrea

Aim of the experiment: Preparation of the plasmids for transformation

Overnight cultures of cells with limonenesynthase-plasmid from Prof. Schwab

  • resuspend 50 µl / 200 µl of competent cells with 50 ml LB medium
  • add 0,1 ml Ampicillin (100 µg/ml) and 0,28 ml Chloramphenicol (170 µ/ml) for strain 108
  • add 0,07 ml Kanamycin (50 µg/ml) and 0,28 ml Chloramphenicol (170 µ/ml) for strain 106
  • incubate at 37 °C

Friday, June 15th

Exchange of the Multiple Cloning Site of pTUM104

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pTUM104

Analytical DNA gel electrophoresis

  • gel: 1.2 %
  • band 1: 10 µl DNA ladder (1kb)
  • band 2: 3 µl pYES2 digested + 7 µl TAE-buffer + 1 µl loading dye
  • band 3: 3 µl O5 + 7 µl TAE-buffer + 1 µl loading dye
  • band 4: 3 µl O6 + 7 µl TAE-buffer + 1 µl loading dye
  • band 5: 10 µl DNA ladder (100 bp)

TUM12 pYES2 and primer.jpg

Ligation of Plasmid P5 (pYES2 digested) with the hybridized primers O5 and O6

volume reagent
4 µl pYES2 digested (P5)
1 µl O5
1 µl O6
2 µl T4-ligase buffer (10x)
0,5 µl T4 DNA-ligase
11.5 µl ddH2O

Negative control

volume reagent
4 µl pYES2 digested (P5)
2 µl T4-ligase buffer (10x)
0,5 µl T4 DNA-ligase
13.5 µl ddH2O
  • water bath 16 °C
  • after 3 h a probe for the transformation was taken
  • the rest was ligated over the weekend

Transformation of E. coli with ligated products (P6)

  • competent cells: SHXL1 Blue (by Simon)
  • Transformation with ligation product (P6) and negative control

results:

  • P6 (100 µl): 1 clone
  • P6 (concentrated): 30 clones
  • negative control (100 µl): 0 clones
  • negative control (concentrated): 6 clones

Transformation of plasmids from Prof. Schwab into E.coli XL-1 Blue

Investigator: Andrea

Aim of the experiment: Preparation of the plasmids for transformation

Determination of the concentration with Nano Drop

Sample concentration [ng/µl]
P3 1353
P4 no result
  • the strain 106 culture was not grown satisfying and were incubated for 2 more days

Miniprep of pGex-4T-1 of strain 108 from Prof. Schwab

  • see QIAprep Spin Miniprep Kit
  • stored as P3 (-20 °C)

Sunday, June 17th

Exchange of the Multiple Cloning Site of pTUM104

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pTUM104

Picking clones for Miniprep

  • 10 clones of transformed E.coli with P6 were picked
  • medium: 5ml LB with Amp

Week 2

Monday, June 18th

Exchange of the Multiple Cloning Site of pTUM104

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pTUM104

Miniprep of transformed E.coli with P6

  • QIAprepS Spin Miniprep Kit
  • step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)
  • the 10 Minipreps were named: P7 - P16

Determination of the concentration with Nano Drop

Sample concentration [ng/µl] 260/280
P7 157.6 2.32
P8 207.3 1.63
P9 171.2 2.02
P10 183.1 1.57
P11 160.4 2.2
P12 179.9 1.75
P13 179.2 2.07
P14 188.3 1.6
P15 166.7 2.05
P16 174.6 2.08

Controll digestion with HindIII XbaI and NgoMIV

  • Samples P7-P16: 2.5 µl
  • Negative controll pYES SH 1.7.3: 2.5 µl
  • Master Mix HindIII and XbaI: 17,5 µl for a 20 µl preparation
volume reagent
3 µl HindIII
3 µl XbaI
24 µl NEB2
24 µl 10x BSA
156 µl ddH2O
  • Master Mix NgoMIV: 17,5 µl for a 20 µl preparation
volume reagent
6 µl NgoMIV
24 µl NEB4
180 µl ddH2O

Incubation: 37 °C, 1.5 h

Analytical gel electrophoresis of P7-P16

  • gel: 1.5 %

gel 1:

  • band 1: 10 µl DNA ladder (1 kb)
  • band 2: 3 µl pTUM104 SH 1.7.3 digested with HindIII and XbaI + 7 µl TAE buffer + 1 µl loading dye
  • band 3 - 12: 3 µl P7-P16 digested with HindIII and XbaI + 7 µl TAE buffer + 1 µl loading dye

TUM12 pYES new mcs digested with Xbal and HindIII.jpg

gel 2:

  • band 1: 10 µl DNA ladder (1 kb)
  • band 2: 3 µl pTUM104 SH 1.7.3 digested with NgoMIV + 7 µl TAE buffer + 1 µl loading dye
  • band 3 - 12: 3 µl P7-P16 digested with NgoMIV + 7 µl TAE buffer + 1 µl loading dye

TUM12 pYES new mcs digested with NgoMIV.jpg

Tuesday, June 19th

Transformation of BBa_I742111 (Limonenesynthase) into E.coli XL-1 Blue

Investigator: Andrea

Aim of the experiment: Transformation

  • for each Biobrick 100 µl cells were used and pooled together with 2 µl of plasmid DNA
  • Incubation on ice for 30 min
  • 5 min heat shock at 37 °C
  • cells were prefilled with 1 ml of LB-medium and incubated in a cell-culture shaker at 37 °C for 45 min
  • 100 µl of these cell suspension were plated on antibiotic selection plates (Ampicillin)
  • cell suspension was centrifuged at 13000 rpm for 60 s for resuspending the pellet with 100 µl LB and plating also
  • incubation at 37 °C overnight

Wednesday, June 20th

Exchange of the Multiple Cloning Site of pTUM104

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pTUM104

Sequencing of P13 and P14: pTUM104 with new MCS sequencing primer:

  • 1.6 µM forward primer O9
  • DNA P13 and P14

The Multiple Cloning Site was exchanged successfully!!!

Transformation of BBa_I742111 (Limonenesynthase) into E.coli XL-1 Blue

Investigator: Daniela

Aim of the experiment: Transformation

Picking of Clones

  • 6 clones were picked
  • Incubation at 37 °C in LB + Amp

Thursday, June 21st

Transformation of BBa_I742111 and plasmids from Prof. Schwab into E.coli XL-1 Blue

Investigator: Lara, Andrea

Aim of the experiment: Controll of Transformation

Controll digestion

  • Sample P3
volume reagent
14 µl Plasmid-DNA
0,25 µl NcoI
2 µl Buffer Tango (Fermentas)
0,25 µl HindIII
2 µl Buffer Red (Fermentas)
1,5 µl ddH2O
  • Sample P4
volume reagent
6 µl Plasmid-DNA
0,25 µl EcoRI
2 µl Buffer EcoRI (Fermentas)
0,25 µl NotI
2 µl Buffer Orange (Fermentas)
9,5 µl ddH2O
  • Sample Biobrick-clones
volume reagent
5 µl Plasmid-DNA
0,25 µl EcoRI
2 µl Buffer EcoRI (Fermentas)
0,25 µl PstI
2 µl Buffer Orange (Fermentas)
10,5 µl ddH2O

Analytic Gelelectrophoresis

21.06.12.png

Friday, June 22nd

Transformation of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS

Investigator: Ingmar, Volker

Aim of the experiment: Plasmid amplification

Operation Sequence:

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells
  • addition of 1 µl of the Plasmid pKS2µHyg-PAL-4Cl-CHS
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Saturday, June 23rd

Quick Change mutagenis to remove NgoMIV from pTUM104

Investigator: Ingmar, Volker

Aim of the experiment: Generation of an RFC 25 compatible version of the pTUM104 Vector.

PCR
Reaction batch

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P7 pYes2_RFC25 MCS 1.1 template
0.5 µl 1:10 dilution of O38 (10 pmol/µL)
0.5 µl 1:10 dilution of O39 (10 pmol/µL)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 15 95°C 30 sec
55°C 1 min
68°C 6 min
  • The vector resulting from the PCR-product was named pYes2_RFC25 MCS 1.2.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells
  • addition of 1 µl of the Plasmid P7 pYes2_RFC25 MCS 1.2
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Sunday, June 24th

Miniprep of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS

Investigator: Ingmar, Volker

Aim of the experiment: Plasmid purification

Operation Sequence:

  • A single clone of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS was picked an transferred to 5 ml LB Amp on saturday evening. Incubation overnight at 37°C 180 rpm.
  • Using a Quiagen kit a miniprep of the overnight culture was done.

Quick Change mutagenis to remove NgoMIV from pTUM104

Investigator: Ingmar, Volker

Aim of the experiment: Removal of a NgoMIV restriction site in the backbone of pTUM104.

Operational sequence:

  • A single clone of E. coli pYes2_RFC25 MCS 1.2 was picked an transferred to 5 ml LB Amp. Incubation overnight at 37°C 180 rpm.

Transformation of 2 Biobricks into E. coli XL1-Blue

Investigator: Jeffery Truong

Aim of the experiment: Transformation of Biobricks into E. coli for plasmid propagation for PCR with new RFC pre- and suffix primer in order to do protein fusions.

  • 2 Biobricks from the distribution kit were used: First, LexA (BBa_K105005, Plate 3 Well 9E) in the pSB1A2 plasmid with ampicillin resistance and second, the heme oxygenase (BBa_I15008, Plate 2 Well 13J) in the pSB2K3 plasmid with kanamycin resistance.
  • 10 µL of autoclaved H2O were added to each well on the distribution kit. The well immediately turned red which means that one does it right.
  • The now resuspended DNA liquids were transferred into a new ERG on ice.
  • CaCL2 competent E. coli XL1-Blue cells from the stock were gently defrezed on ice.
  • For each Biobrick 100 µL cells were used and pooled together with 2 µL of plasmid DNA in a ERG on ice.
  • Incubation on ice for 30 min.
  • 5 min heat shock at 37 °C.
  • Each ERG now is transferred in a new ERG prefilled with 1 mL of LB-medium and incubated in a cell-culture shaker at 37 °C for 45 min.
  • 100 µL of these cell suspension were plated on antibiotic selection plates (Ampicillin for LexA and Kanamycin for heme oxygenase).
  • The rest of the cell suspension is centrifuged at 13000 rpm for 60 s and the supernatant is discarded.
  • The pellet is resuspended with 100 µL for each ERG and is plated on another antibiotic selection plate
  • These 4 plates were put at 37 °C overnight

Week 3

Monday, June 25th

Miniprep of E. coli XL1-Blue with pTUM104_RFC25 MCS 1.2

Investigator: Alois, Martin

Aim of the experiment: proof of successful removal of NgoMIV in the backbone of pTUM104

Operation Sequence:

  • Mini prep of pTUM104 1.2. The resulting purified DNA is P33.
  • Control digest of pTUM104_RFC25 MCS 1.2 and p13 (+ analytical gel electrophoresis: 90 V, 1 h:
*  15 µl ddH20
*   2 µl NEBuffer4
* 0,5 µl NgoMIV
* 2,5 µl pTUM104 1.2/p13
* 37°C, 1 h.

Quick Change mutagenis to remove SpeI from pTUM104_RFC25 MCS 1.2

Investigator: Ingmar, Volker

Aim of the experiment: Generation of an RFC 25 compatible version of the pTUM104 Vector.

PCR
Reaction batch

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P33 template
0.5 µl 1:10 dilution of O44 (10 pmol/µL)
0.5 µl 1:10 dilution of O45 ((10 pmol/µL)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 15 95°C 30 sec
55°C 1 min
68°C 6 min
  • The procedure was furthermore applied to P13 and P14.
  • The vector resulting from the PCR-product was named pTUM104_RFC25 MCS 1.3.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • This operation sequence was applied to the PCR prducts of P33, P13 and P14 respectively.
  • melting of 100 µl Ca-competent E.coli XL1-Blue cells
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Picking of E. coli cells on antibiotic selection plates: pSB1A2 plasmid with BBa_K105005 (LexA) and pSB2K3 plasmid BBa_I15008 (heme oxygenase)

Investigator: Jeffery Truong

Aim of the experiment: Picking colonies from transformed E. coli XL1-Blue, 4x picked for each Biobrick.

  • pSB1A2 plasmid with BBa_K105005 (LexA): Colonies were on both ampicillin selection plates, the one with diluted cell suspension and the one with concentrated E. coli cell suspension. Typical E. coli colony morphology. Picking was performed on the plate with diluted cell suspension.
  • pSB2K3 plasmid BBa_I15008 (heme oxygenase): Colonies were only on the kanamycin selection plate with concentrated cell suspension. The one with diluted susepension was empty. Typical but very small E. coli colonies. Picking was performed from the first plate.
  • Picked pipette tips was transferred into a special cell-culture tubes with air-permeable, but sterile cover. In each tube 4 mL of LB-medium + ampicillin (???)(for pSB1A2) or kanamycin (35 mg/mL) (for pSB2K3).
  • 4 colonies for each Biobrick was picked; total: 8 tubes overnight culture.
  • These tubes were transferred in a cell culture shaker at 37 °C and were incubated overnight

Tuesday, June 26th

Quick Change mutagenis to remove SpeI from pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a SpeI restriction site in the backbone of pTUM104.

Operational sequence:

  • For each transformation of the PCR-products of P14 and P33 a single clone was picked an transferred to 6 ml LB Amp. Incubation overday at 37°C 180 rpm. The transfomation with the PCR product of P13 was not successfull. Therfore no clone could be picked.
  • Using a Quiagen kit a miniprep of the overnight culture was done.
  • The resulting purified DNA was aliquoted in new tubes labeled as follows:

PCR product of P33(transformation done by Ingmar): P29

PCR product of P33(transformation done by Saskia&Jara): P30

PCR product of P14(transformation done by Ingmar): P31

PCR product of P14(transformation done by Saskia&Jara): P32

  • Afterwards a control digestion of P29-P32 was done.

Reaction batch

Plasmid P29 P30 P31 P32
NEB4 buffer 2 µl 2 µl 2 µl 2 µl
DNA 2,5 µl 2,5 µl 5 µl 5 µl
SpeI-HF 0.25 µl 0.25 µl 0.25 µl 0.25 µl
NgoMIV 0.25 µl 0.25 µl
ddH2O 15 µl 15 µl 12.75 µl 12.75 µl
Sum 20 µl 20 µl 20 µl 20 µl
  • Incubation at 37 °C for 1h.
  • Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 2 µl DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

Gel picture of control digest with NgoMIV and SpeI

Verification of the PCR products P30, P31 and P33

Investigator: Saskia, Jara

Aim of the experiment: Verification of the PCR produts P30, P31 and P33

Nano Drop

Sample concentration [ng/µl] 260/280
P33 1072.6 1.01
P30 1588 1.28
P31 926.2 0.82

Analytical gel electrophoresis

  • gel: 1 %
  • band 1: 10 µl DNA ladder (1kb)
  • band 2: P30
  • band 3: P33
  • band 4: P31

Control of the competent cells and transformation with P20

Investigator: Saskia, Jara

Aim of the experiment: Control of the competent cells and transformation with P20 Transformation

  • competent cells: by Simon and Ingmar
  • plasmid: P20

result:

  • successful transformation: red colonies

PCR of PAL, 4CL, CHS, OMT (Xanthohumol-CoA)

Investigator: Daniela, Mary

Determination of concentration of plasmids (Nanodrop): c(pKS2µHyg-PAL-4CL-CHS) = 500 ng/µl c (pOMT) = 20 ng/µl

PCR:

Name of tube Enzyme consensus (+)/ consensless (-) used Oligos
CHS - CHS - O13 and O24
CHS + CHS + O23 and O24
PAL - PAL - O15 and O16
PAL + PAL + O22 and O16
OMT - OMT - O17 and O26
OMT + OMT + O25 and O26
4CL - 4CL - O19 and O20
4CL + 4CL + O21 and O20

Reaction batch

volume reagent
5 µl 10x Pfu Ultra II buffer
4 µl dNTP's (each 2.5 mM)
0.5 µl Pfu Ultra II (2.5 U/µL)
5 µl 1:10 dilution of used forward primers (10µM)
5 µl 1:10 dilution of used reversed primers (10µM)
1 µl DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL or pOMT 20 ng/µL)
29.5 µL bidest. sterile Water

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 5 min (and adding Pfu Ultra after 3 min)
2 30 95°C 30 sec
46°C 2.5 min
72°C 1.5 min
3 72°C 5 min

PCR purification

  • Purification was done using QIAquick PCR Purification Kit (250)

Analytical Gel Electrophoresis: TUM12 20120629 PCR von p2µHyp-PAL-CHS-4CL und pOMT.jpg

-> going on with CHS, 4CL and OMT; the PCR of PAL will be repeated

Miniprep and analytical gel of picked transformed overnight culture with pSB1A2 plasmid with BBa_K105005 (LexA) pSB2K3 plasmid BBa_I15008 (heme oxygenase)

Investigator: Jeffery Truong, Georg Schützinger

Aim of the experiment: Plasmid isolation from the picked transformed overnight E. coli cells with pSB1A2 plasmid with BBa_K105005 (LexA) pSB2K3 plasmid BBa_I15008 (heme oxygenase).

  • The LB-medium with antibiotics of every tube was opaque which means that the picked cells were successfully inoculated.
  • Centrifugation step at 5000 rpm for 10 min at 16 °C.
  • Every single step now was performed on ice.
  • Miniprep (Qiagen Qiaprep spin) after manufacturer's protocoll.
  • Analytical restriction master mix was prepared after following scheme (Using XbaI and PstI):
    • 4.4 µL XbaI
    • 4.4 µL PstI
    • 17.6 µL Tango-buffer (10x)
    • 132 µL ELGA H2O
  • 17.5 µL from the master mix was poooled together with 2.5 µL of plasmid DNA. That corresponds to 2.5 µL of plasmid DNA, 0.25 µL XbaI, 0.25 µL PstI, 2 µL Tango-buffer (10x), 15 µL ELGA H2O.
  • Incubation at 37 °C for 120 min on a ERG heating unit.
  • BUT: error was performed during preparing the digested plasmid DNA for analytical gelelectrophoresis in the dilution step. 1:10 dilution of analyctical probe with DNA loading buffer:
    • 3.3 µL sample (contains already 1x loading buffer!)
    • 0.7 µL loading buffer (?x)
    • 6 µL TAE-buffer
  • Should have done: 3 µL sample + 1 µL loading buffer (10x) + 6 µL TAE-buffer (1x)
  • DNA-ladder preperation: 10 µL ladder stock solution + 10 µL DNA loading buffer + 80 µL TAE-buffer. 10 µL of this solution was pipetted in one gel pocket of the prepared 1% agarose gel including ehtiudiumbromid.
  • 20 µL of each samples were also pipetted into the gel pockets.
  • The gel pockets were pipetted after following scheme:
Heme oxygenase (colony 1) Heme oxygenase (colony 2) Heme oxygenase (colony 3) Heme oxygenase (colony 4) DNA-ladder LexA (colony 1) LexA (colony 2) LexA (colony 3) LexA (colony 4)
  • Gel electrophoresis at 90 V
  • After 20 min the resolution was still poor; 20 min longer.
  • Analytical Gel okay, but samples interchanged

Analytical gel after digestion with XbaI and PstI

Wednesday, June 27th

Repetition of analytic gel of 21st June

Investigator: Andrea, Lara

Buffer systems were adjusted. -> only use of one buffer per reaction.

27.06.12.png

Friday, June 29th

Preparative digest of PCR-products of 4CL, CHS and OMT

Investigator: Katrin, Mary

each digestion will dure 2.5h at 37°C

  • CHS: digestion with Xba1 and HF-Age1 (both NEB)
volume reagent
25µl PCR-product
5µl Buffer NEB4
0.5µl BSA
1µl Xba1 (NEB; 20u/µl)
1µl HF-Age1 (NEB; 20u/µl)
17.5µl bidest. sterile H2O
  • OMT: digestion with Xba1 and HF-Age1 (both NEB)
volume reagent
25µl PCR-product
5µl Buffer NEB4
0.5µl BSA
1µl Xba1 (NEB; 20u/µl)
1µl HF-Age1 (NEB; 20u/µl)
17.5µl bidest. sterile H2O
  • 4CL: digestion with Xba1 and Pst1 (both Fermentas)
volume reagent
25µl PCR-product
5µl Buffer Tango
2µl Xba1 (Fermentas; 10u/µl)
3µl Pst1 (Fermentas; 10u/µl)
15µl bidest. sterile H2O

Preparative Gelelectrophoresis of PCR-products of 4CL, CHS

Investigator: Katrin, Mary

Gelextraction of 4CL+, 4CL-, CHS+, CHS- (bands are as expected; +=with consensus-sequence, -=without consensus-sequence)

preparative gel of 4CL

preparative gel of CHS

DNA-purification with Kit from Quiagen

Quick Change mutagenesis to remove PstI in URA3 from pTUM104_RFC25 MCS 1.2

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pTUM104 Vector.

PCR
Reaction batch

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P29 template
0.5 µl 1:10 dilution of O40 (10 pmol/µL)
0.5 µl 1:10 dilution of O41 ((10 pmol/µL)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 15 95°C 30 sec
55°C 1 min
67°C 6.5 min
  • The procedure was furthermore applied to P31.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • This operation sequence was applied to the PCR prducts of P29 and P31 respectively.
  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Saturday, June 30th

Quick Change mutagenis to remove PstI in the URA 3 gene from pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pTUM104.

Operational sequence:

  • For each transformation of the PCR-products of P29 and P30 a single clone was picked an transferred to 6 ml LB Amp. Incubation overnight at 37°C 180 rpm. The transfomation with the PCR product of P31, P32 and P33 was not successfull. Therfore no clone could be picked from these plates and four instead of one clone was picked from the plates containing the transformations of P29.

Sunday, July 1st

Quick Change mutagenis to remove PstI in the URA 3 gene from pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pTUM104.

Operational sequence:

  • Using a Quiagen kit a miniprep of the overnight culture was done.
  • The resulting purified DNA was aliquoted in new tubes labeled as follows:

1st PCR product of P29: P34

2nd PCR product of P29: P35

3rd PCR product of P29: P36

4th PCR product of P29: P37

PCR product of P30: P38

  • Afterwards a control digestion of P34-P38 was done.

Reaction batch

Plasmid P34 P35 P36 P37 P38
Fermentas 10x R buffer 0.5 µl 0.5 µl 0.5 µl 0.5 µl 0.5 µl
DNA 2 µl 2 µl 2 µl 2 µl 5 µl
PstI 0.25 µl 0.25 µl 0.25 µl 0.25 µl 0.25 µl
ddH2O 17.25 µl 17.25 µl 17.25 µl 17.25 µl 14.25 µl
Sum 20 µl 20 µl 20 µl 20 µl 20 µl
  • Incubation at 37 °C for 1h.
  • Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 4 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

Gel picture of control digest with PstI

  • All digest products show the expected two bonds at 3526 bp and at 2332 bp. The Miniprep product P35 was chosen to be used for the further Quickchange Mutagenesis.

Quick Change mutagenesis to remove PstI in the 2µ ori from pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pTUM104 Vector.

PCR
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P35 template
0.5 µl 1:10 dilution of O42 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P35 template
0.5 µl 1:10 dilution of O43 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Week 4

Monday, July 2nd

Repetition of PCR of PAL

Investigator: Mary

Reaction batch

volume reagent
5 µl 10x Pfu Ultra II buffer
4 µl dNTP's (each 2.5 mM)
0.5 µl Pfu Ultra II (2.5 U/µL)
5 µl 1:10 dilution of used forward primers (10µM)
5 µl 1:10 dilution of used reversed primers (10µM)
1 µl DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL)
29.5 µL bidest. sterile Water

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 2 min (and adding Pfu Ultra after 2 min)
2 30 95°C 30 sec
55°C 1 min
72°C 2.5 min
3 72°C 5 min

PCR of LexA with primers including the RFC25 pre- and suffix

Investigator: Jeffery Truong, Georg Schützinger

Aim of the experiment: The Biobrick BBa_K105005 (LexA) has a RFC10 pre- and suffix, but we need RFC25 pre- and suffix for protein fusion, so we have to do a PCR with primer containing the RFC25 pre- and suffix.

  • The received forward and reverse primer TUM12-LexA-fw and TUM12-LexA-rv are resuspended in 204 µL and 221 µL ELGA water as described in the data sheet to get a final primer concentration of 100 pmol/µL=100 µM. For the PCR reaction mixture we took 0.5 µL of these resuspended primer and add 4.5 µL of ELGA water to get a final primer concentration of 10 µM.
  • Clone 3 of BBa_K105005 (LexA) has beed choosen for the PCR (ERG No. P23).

PCR reaction mixture

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer
1 µl 10 µM Reverse Primer
0.25 µL OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl Plasmid DNA (BBa_K105005) from P23 (Clone 3)
35.75 µL ELGA Water
=50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
55 °C 60 s
68 °C 60 s
Final extension 68 °C 5 min
Hold 4 °C overnight

Tuesday, July 3rd

Analytic gelelectrophoresis of cleaned up PCR product from LexA with primer containing RFC25 pre- and suffix

Investigator: Jeffery Truong

Aim of the experiment: Analytical gelelectrophoresis of cleaned up PCR product from LexA (BBa_K105005) with primer containing the RFC25 pre- and suffix (TUM12-LexA-fw and TUM12-LexA-rv).

  • The clean-up of the PCR product LexA (BBa_K105005) with primer containing the RFC25 pre- and suffix (TUM12-LexA-fw and TUM12-LexA-rv) was performed with the QIAquick PCR Purification Kit from Qiagen after manufacturer's protocoll.
  • 5 µL of the purificated PCR product was taken to perform a analytical gelelectrophoresis to verify the success of the PCR.
  • 1% agarose gel containing ethidium bromide was used for the analytical gelelectrophoresis.
  • The analytical gelelectrophoresis was performed for 60 min at 90 V.
  • Scheme of the gel:
100 bp ruler PCR product of BBa_105005 1000 bp ruler
  • Analytical gelelectrophoresis of PCR product of BBa_K105005 with primer TUM12-LexA-fw and TUM12-LexA-rv

LS: Plating of Schwab expression stains #106 & #108 which contain lavendula limonene synthase

Investigator: Lara

Aim of the experiment: To get colonies of BL21 strains containing lavendula LS for amplification and subsequent plasmid extraction.

  • Schwab strain #106 was plated on a chloramphenicol containing LB plate. #108 was plated on a amp+chlp containing LB plate. The plates were incubated at 37°C over night.

Quick Change mutagenis to remove PstI in the 2µ Ori from pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pTUM104.

Operational sequence:

  • From the transformation of the PCR-product of P35 two single clones were picked an transferred to 6 ml LB Amp. Incubation overnight at 37°C 180 rpm.

PCR of BBa_I742111 (Limonenesynthase) Clone 3 (Transformation of 19.06.12)

Investigator: Andrea

PCR used forward primer with consensus sequence; PCR reaction mixture

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer O27
1 µl 10 µM Reverse Primer O30
0.25 µl OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl Plasmid DNA (BBa_I742111) Clone 3
35.75 µl dd water
50 µL TOTAL

PCR used forward primer without consensus sequence; PCR reaction mixture

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer O28
1 µl 10 µM Reverse Primer O30
0.25 µl OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl Plasmid DNA (BBa_I742111) Clone 3
35.75 µl dd water
50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
47 °C 30 s
68 °C 1,75 min
Final extension 68 °C 5 min
Hold 4 °C 1 h

Analytical Gelelectrophoresis

  • 5 µl DNA + 1 µl loading buffer

03.07.12.png

Wednesday, July 4th

Quick Change mutagenis to remove PstI in the 2µ Ori from pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pTUM104.

Operational sequence:

  • Using a Quiagen kit a miniprep of the overnight culture was done.
  • The resulting purified DNA was aliquoted in new tubes labeled as follows:

1st Transformation of P35: P43

2nd Transformation of P35: P44

  • Afterwards a control digestion of P43 and P44 was done.

Reaction batch

Plasmid P43 P44
Fermentas 10x R buffer 0.5 µl 0.5 µl
DNA 5 µl 5 µl
PstI 0.25 µl 0.25 µl
ddH2O 14.25 µl 14.25 µl
Sum 20 µl 20 µl
  • Incubation at 37 °C for 1h.
  • Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 4 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

Gel picture of control digest with PstI

  • All digest products show the expected bond at 5858 bp. The Miniprep product P40 was chosen to be used for the further Quickchange Mutagenesis.

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pTUM104 Vector; operating purfication possibility via Strep-tag II.

PCR
Reaction batch

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P44
1 µl 1:10 dilution of O54 (10 pmol/µL)
1 µl 1:10 dilution of O55 ((10 pmol/µL)
16 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 16 95°C 30 sec
55°C 1 min
68°C 6 min
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Analytical Gelelektrophoresis of PCR-Products of PAL

Investigator: Mary

Aim of the experiment: purification and testing if PCR was successful

Purification of PCR-Products with purification kit from quiagen analytical gelelectrophoresis of PAL+, PAL-; expected band at 2,1 kb

Analytical Gel Electrophoresis: File:TUM12 20120704 PAL-PCR v2.tiff

-> PCR was not successful, no band at 2,1 kb

-> next steps: new Design of Primer and repetition of PCR with new primers

Picking of clones of Schwab expression stains #106 & #108

Investigator: Andrea

Aim of the experiment: Getting clones of cells with plasmids containing the gene for limonenesynthase and amplification of these clones for further plasmid preparation.

Picking of Clones

  • 2 clones of every stain were picked
  • Incubation at 37 °C in LB + Amp (#108) / LB + Kan (#106)

Preparative Gelelectrophoresis of PCR-products of OMT

Investigator: Mary, Katrin

Aim of the experiment: Purification of the previously digested DNA, test if digestion was successful

picture follows!

Gelextraction of OMT- and OMT+ (bands are as expected; +=with consensus-sequence, -=without consensus-sequence)

DNA-purification with Kit from Quiagen

Thursday, July 5th

Preparation of plasmids containing lavendula LS

Investigator: Lara

Aim: Purify Schwab plasmids containing lavendula limonene synthase

Experiment was conducted using Qiagen Plasmid Miniprep Kit.

P39: Plasmid from Schwab strain #106 (1); 35 ng/µl

P40: Plasmid from Schwab strain #106 (2); 72 ng/µl

P41: Plasmid from Schwab strain #108 (1); 240 ng/µl

P42: Plasmid from Schwab strain #108 (2); 120 ng/µl

Restriction digest of Schwab plasmids

Investigator: Lara

Aim: To check whether extracted plasmids from Schwab expression strains #106 & #108 are OK.

Digest of plasmid from strain #106 was conducted with the following protocoll:

500 ng Plasmid DNA

0,25 µl Nco1

0,25 µl Hind 3

2 µl Buffer Tango

dd H2O to a total volume of 20 µl.

Digest of plasmid from strain #108 was conducted with the following protocoll:

500 ng Plasmid DNA

0,25 µl EcoR1

0,25 µl Not1

2 µl Buffer Orange

dd H2O to a total volume of 20 µl.

(All enzymes and buffers were from Fermentas).

Analytical gel electrophoresis of digested Schwab plasmids

Investigator: Lara Aim: Check plasmids for insert.

Plasmids were digested, 2 µl loading dye (10x) was added to each sample. Gel was loaded in the following order:

1. 6 µl gene ruler 1 kb, 2.-6. 11 µl of: P39, P40, P41, P42, Xanthohumol-Plasmid (Katrin)

TUM12 VerdauSchwabPlasmide0507.png

Analytical Gelelektrophoresis of plasmid pKS2µHyg-PAL-4Cl-CHS

Investigator: Katrin

Aim of the experiment: testing if PAL is part of the plasmid that was sent to us (troubleshooting because PCR of PAL was not successful)

digestion took 1 h at 37°C

  • digestion with ApaI (Fermentas)
volume reagent
9.3 µl plasmid pKS2µHyg-PAL-4Cl-CHS (miniprep)
2 µl Buffer B
0.5 µl ApaI (Fermentas; 10u/µl)
8.2 µl bidest. sterile H2O

analytical gelelectrophoresis: expected band at 3,14 kb (Gal-PAL-XK)

Analytical gelelectrophoresis of PCR product of PAL

-> experiment was successful, PAL is part of the plasmid pKS2µHyg-PAL-4Cl-CHS

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pTUM104 Vector; operating purfication possibility via Strep-tag II.

Operational sequence:

  • From the transformation of the PCR-product of P44 two single clones were picked an transferred to 6 ml LB Amp. Incubation overday at 37°C 180 rpm.
  • Using a Quiagen kit a miniprep of the overnight culture was done.
  • The resulting purified DNA was aliquoted in new tubes labeled as follows:

1st picked clone of P44: P45

2nd picked clone of P44: P46

Minipreparation of biobricks BBa_J52028, BBa_E2030, BBa_E2020

Investigator: Martin, Alois

Aim: Getting "reporter proteins"

  • 10 µl water war added to the well of the distribution kit (=> red)
  • BBa_J52028: GFP with PEST191 tag => p51
  • BBa_E2030: EYFP, yeast optimized => p52
  • BBa_E2020: ECFP, yeast optimized => p53
  • Transformation + Minipreparation (Qiagen Plasmid Miniprep Kit)

Friday, July 6th

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pTUM104_RFC25 MCS

  • Afterwards a control digestion of P45 and P46 was done.

Reaction batch

Plasmid P45 P46
Fermentas 10x O buffer 2 µl 2 µl
DNA 3 µl 3 µl
PstI 0.25 µl 0.25 µl
ddH2O 14.75 µl 14.75 µl
Sum 20 µl 20 µl
  • Incubation at 37 °C for 1h.
  • Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 4 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

Gel picture of control digest with PstI

  • All digest products show the expected bonds at 5858 bp. The Miniprep product P45 was chosen to check the insertion of Ala in front of the strep-tag II via DNA sequencing.

The results of the sequencing are shown below:

Sequencing results of P45 The sequencing results show that the insertion of Alanin in front of the Strep-tag II was not successful.

PCR of Schwab plasmid DNA to amplify gene for lavendula LS

Instructor: Lara

Aim: PCR of Schwab plasmids with primers which were designed to amplify the lavendula LS gene and to add RFC25 restriction sites.

3 different primer combinations were used:

1. O33/O37

2. O34/O37

3. O35/O37

Each primer combination was used for plasmid DNA amplification of P40 and P41.

PCR reaction mixture

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer
1 µl 10 µM Reverse Primer
0.25 µl OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
1 µl Plasmid DNA (BBa_I742111) Clone 3
35.75 µl dd water
50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
50 °C 30 s
68 °C 1,75 min
Final extension 68 °C 5 min
Hold 4 °C 1 h

Analytic Gel of PCR of Schwab plasmid DNA

Instructor: Andrea

06.07.12.png

Minipreparation of biobricks BBa_J52028, BBa_E2030, BBa_E2020

Investigator: Martin, Alois

Aim: Getting "reporter proteins"

  • 10 µl water war added to the well of the distribution kit (=> red)
  • BBa_J52028: GFP with PEST191 tag => p51
  • BBa_E2030: EYFP, yeast optimized => p52
  • BBa_E2020: ECFP, yeast optimized => p53
  • Transformation + Minipreparation (Qiagen Plasmid Miniprep Kit)

Saturday, July 7th

Quick Change mutagenesis to insert Ala in front of the Strep-tag II in pTUM104_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pTUM104 Vector.

  • As the sequencing of the first attempt to introduce Ala in front of the Strep-tag II did not show a successfull insertion of Ala, the quickchange mutagense was performed once again with a modified setup. Presumably a formation of primer dimers was responsable for the experiment's results. Therefore the second PCR was operated in two steps as shown below.

PCR
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P44 template
0.5 µl 1:10 dilution of O54 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Turbo DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P44 template
0.5 µl 1:10 dilution of O55 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Transformation of E.coli XL1 blue with ADH1 promoter (BBa_J63005), ADH1 terminator(BBa_J63002) and TEF2 promoter from Igem Distribution kit

Investigator: Georg

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 2 µl of DNA was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates for ADH1-P, and ADH1-T and Kanamycin plates for TEF2-Promoter.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin- and kanamycin plates.

Week 5

Monday, July 9th

Picking of colonies of TEF2-P, ADH1-P, ADH1-T (iGEM)

Investigator: Georg

  • To 5 µl LB-Medium,5 µl of 1000x stock of ampicillin (ADH-P, ADH1-T) and kanamycin (TEF2-P) were added
  • 4 colonies from the plate with TEF2-P and 5 colonies of ADH1-P and ADH1-T were picked
  • Each colony was transferred into 5 ml LB-Medium with 1x ampicillin or kanamycin
  • Incubation over night at 37°C in the 180rpm cell-culture shaker.

Repetition of picking of colonies of ADH1-P, ADH1-T, TEF2-P from iGEM distribution kit

Investigator: Georg

  • Analytical Gel was loaded with 9 µl digestion and 1 µl 10x buffer

Repetition of picking of colonies of TEF2-P, ADH1-P, ADH1-T (iGEM)

Investigator: Georg

  • Only ADH1 promoter showed cell proliferation. The rest showed no proliferation.The reason was a 10x too high amount of antibiotics.
  • Colonies from transformation from ADH1-promoter and terminator were picked again and incubated in LB medium with

ampicillin at a dilution of 1:1000 and for TEF2 –Promoter with Kanamycin at a dilution of 1:1000

  • From the grown colonies from the transformation with ADH1-Promoter then were the plasmids extracted, using the

Quiaprep Spin Miniprep kit from Quiagen

  • The extracted ADH1-P DNA was then analytically digested with XbaI and PstI from Fermentas
  • Reaction batch for digestion:
volume reagent
1 µl PSTI (Fermentas)
1 µl XbaI (Fermentas)
8 µl Tango buffer
60µl dd H20
=70µl TOTAL
  • To 17,5 µl mastermix was 2,5 µl of plasmid DNA added
  • to 2,5 ml of DNA 17,5 µl reaction batch were added
  • Digestion took place at 37°C for 1 h

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 1/4)

Investigator: Jeff, Alois, Martin

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

  • 50 g of Spirulina platensis powder was (from concept-vitalprodukte.de) resuspended in 1.5 l of H2O (30 mg/l) in a beaker covered with aluminium foil.
  • Stirring for 10 min at RT.
  • Green Spirulina suspension was divided in 6 centrifuge bottles, covered in aluminium foil.
  • Centrifation at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 1 h.
  • Supernatant was discarded
  • 25 ml of MeOH added to each bottle and was heavily shaked to resuspend the pellet for the next cleaning step with MeOH.
  • Each bottle with the resuspended pellet were filled with MeOH to a final volume of 250 ml and shaked again to fully resuspend the pellet.
  • Centrifugation at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 10 min.
  • Supernatant was discarded.
  • The last 4 steps were repeated until the supernatant of the washed pellet was colorless or cyanblue but not green anymore (Regulary, it takes 3 or 4 times). Pellet should be cyanblue now.
  • The pellet of the 6 centrifuge tubes was collected in a sole centrifugation tube, covered in aluminium foil tube, by scratching it out with a small spoon.
  • The remaining rest of the pellet which cannot be scratched out were resuspended in a small amount of MeOH and were transformed from tube to tube with a interim shaking step.
  • This suspension was transferred into the tube with the scratched-out pellet.
  • Centrifugation at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 10 min.
  • Supernatant was discarded.
  • Finally washed pellet was stored, wrapped in foil overnight for the methanolysis next day.

Green dried Spirulina platensis powder Cyanblue Pellet after 4x of MeOH washing step Cyanblue supernatant of the last washing step with MeOH. It indicates that all the green chromophores are already washed out, which means that only the protein-bound phycocyanobilin is still arrested in he pellet Resuspended Pellet in MeOH to pool all the pellet Analytical sample of the dried pellet before the methanolysis for later analysis

Tuesday, July 10th

Analytical digestion of ADH1-P and gelelectrophoresis

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
1 µl PstI-HF (NEB)
1 µl XbaI (NEB)
8 µl NEB-4 buffer
0,8 µl 100 x BSA (NEB)
59,2 µl dd H20
=70µl TOTAL

10.07.2012 ADH1 Prom (fertig).PNG

Extraction of ADH1-P, TEF2-T with plasmid

Investigator: Georg

  • Plasmid-DNA was extracted according to Quiaprep Plasmid extraction kit

Inoculation of TEF1-P, PGK-P, Cyc-T

Investigator: Georg

  • Transfomed E. coli cells from iGEM were inoculated onto Amp-LB-Plates in case of PGK1-P and Cyc1-T
  • E. coli with TEF1-T were inoculated onto psb1c3

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 2/4)

Investigator: Jeff, Alois, Martin

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

  • Washed pellet from the day before was resuspended in 500 ml MeOH.
  • Heat suspension in a 500 ml flask in a water bath at 70 – 75 ºC with a condensing coil cooled with water for 5 – 8 hrs.
  • After this, the suspension was transferred into a new centrifuge tube and centrifuged at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 20 min.
  • The supernatant was decanted trough a filter paper into new centrifugation tube and stored, wrapped in a aluminium foil, at -20 °C.
  • The pellets also was stored, wrapped in a aluminium foil, at -20 °C.

Plating of received E. coli containing biobricks

Investigator: Jeff

Aim of the experiment: The received biobricks were already transformed in E. coli and were in an agar stabs. These E. coli cells were transferred with an inoculation loop on antibiotic selection plates and were incubated over night.

Operational sequence:

  • Bacterias containing plasmids with biobricks were transferred with a sterile inoculation loop on antibiotic plates and were incubated at 37 °C overnight.
  • The biobricks were: BBa_K207001 in pSB1A2, BBa_K243006 in BBa_K157000, BBa_K300001 in K300007 (part for other subproject), BBa_K268000 in pSB6A0 (part for other subproject), BBa_K365005 RFC25 in pSB1C3, BBa_K365000 in pSB1C3, BBa_K207000 in pSB3K3, BBa_K165031 in pSB1AK3

Wednesday, July 11th

Analytical digestion and gelelectrophoresis of ADH1-Terminator and TEF2-P

Investigator: Georg

  • Transformants of ADH1-T showed no Plasmid
  • TEF2 Promoter-colonies were all positive

20120711 tef2promotor adh1terminator.PNG

Picking of inoculated CYC1-T, TEF1-P, PGK1-P for overnight cultures

Investigator: Georg

  • To 5 µl LB-Medium,5 µl of 1000x Chloramphenicol were added
  • 4 colonies from the plate with TEF1-P, 4 colonies of Cyc-T were picked and 4 colonies of PGK1-P were picked
  • Each colony was transferred into 5 ml LB-Medium with 1x Chloramphenicol (TEF1-P)or Amp (PGK1-P, Cyc1-T)
  • Incubation over night at 37°C in the 180rpm cell-culture shaker.

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 3/4)

Investigator: Jeff, Alois, Martin

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

  • The pellet after the first methanolysis of the day before was undergone a second methanolysis step to ensure high efficiacy of PCB extraction. Operational sequence was performed like the first methanolysis including the centrifugation and filtering step. The pellet after the second methanolysis should be more colorless and the filtered supernatant was freezed, like the one from the first methanolysis, at -20 °C, wrapped in aluminium foil

Transformation of E. coli XL1-Blue with pGADT7 and pGBKT7 plasmid for Yeast-two-hybrid (Y2H)

Investigator: Jeff

Aim of the experiment: pGADT7 and pGBKT7 are plasmids containing the transcriptional activation domain or the DNA binding domain of the transcription activator Gal4. pGADT7 contains the transcriptional activation domain of gal4; we want to clone the the first 100 residues of Pif3 (BBa_K365000) into this plasmid. As a result we have a fusion contruct of Gal4 and Pif3, which is nescassary for the light-switchable promoter system. pGBKT7 is for backup, if the ordered biobricks are not working.

Operational sequence:

  • E. coli XL1-Blue are transformed with pGADT7 and pGBKT7 seperately after standard protocol of our lab.

Introducing new Saccharomyces cerevisiae strain (Y190 strain) from Schwab lab for Y2H

Investigator: Jeff

Aim of the experiment: The Y190 Saccharomyces cerevisiae is a special strain for Yeast-two-hybrid. This strain carries a Gal4 and Gal80 deletion to higher the signal/noise-ratio of protein-protein interactions. Reporter for protein-protein interactions are HIS3, lacZ and MEL1 and are encoded in the genomic DNA. Transformation markers are trp1, leu2 and cyhR2 and are encoded on the transformation plasmids.

Operational sequence:

  • The freshly plated Y190 cells are transferred with a inoculation loop from the original plate on a new YPD agar plate.
  • After 2 days the the plate was put in 4 °C.

Repetition of PCR of PAL

Investigator: Katrin, Daniela

Reaction batch

volume reagent
5 µl 10x Pfu Ultra II buffer
4 µl dNTP's (each 2.5 mM)
0.5 µl Pfu Ultra II (2.5 U/µL)
5 µl 1:10 dilution of used forward primers (10µM)
5 µl 1:10 dilution of used reversed primers (10µM)
1 µl DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL)
29.5 µL bidest. sterile Water

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 2 min (and adding Pfu Ultra after 2 min)
2 30 95°C 30 sec
52°C 1 min
72°C 2.5 min
3 72°C 5 min

PCR purification

  • Purification was done using QIAquick PCR Purification Kit (250)

Analytical gelelektrophoresis of PCR-Products of PAL

-> PCR was not successful, no band at 2,1 kb (picture follows)

Preparative Digest of pYES2_iGEM

Investigator: Katrin, Daniela

Digestion of P50 with Xbal and NgOMIV

volume reagent
10 µl P50 (concentration: 264.5 ng/µl)
2.5 µl NEB4
2.5 µl 10x BSA
1 µl XbaI (20 U/µl)
2 µl NgOMIV (10U/µl)
7 µl ddH2O

Incubation: 37 °C, 3 h

Digestion of P50 with Xbal and PstI

volume reagent
10 µl P50 (concentration: 264.5 ng/µl)
5 µl Tango buffer
2 µl XbaI
3 µl PstI
7.5 µl ddH2O

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

  • gel: 1% with LMP-agarose
  • band 1: P50 digested with XbaI and PstI
  • band 2: P50 digested with XbaI and NgOMIV
  • 70 V, 90 min

Gelextration

  • cut the bands
  • QIAquick Gel Extractrion Kit was used
    • step 6 was left out
    • step 9: 30µl buffer, 4 min incubation

Ligation of digested P50 with digested PCR-products of PCR 15-20 (4CL, CHS and OMT)

Investigator: Katrin, Daniela

Concentration (Nano Drop:
4CL+ (PCR 15) = 40.3 ng/µl
4CL- (PCR 16) = 37.3 ng/µl
CHS+ (PCR 17) = 46.1 ng/µl
CHS- (PCR 18) = 51.2 ng/µl
OMT+ (PCR 19) = 22.3 ng/µl
OMT- (PCR 20) = 16.7 ng/µl

P50 digested with XbaI and PstI = 23.9 ng/µl (the digested Plasmid has the number P71)
P50 digested with XbaI and NgOMIV = 28.4 ng/µl (the digested Plasmid has the number P72)

  • required volumes were calculated using Lab Tools

4CL+ (PCR 15) with P50 digested with XbaI and PstI

volume reagent
5.27 µl P50 digested
2.73 µl 4CL+ (PCR 15)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

4CL- (PCR 16) with P50 digested with XbaI and PstI

volume reagent
5.13 µl P50 digested
2.87 µl 4CL- (PCR 16)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

CHS+ (PCR 17) with P50 digested with XbaI and NgOMIV

volume reagent
5.84 µl P50 digested
2.16 µl CHS+ (PCR 17)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

CHS- (PCR 18) with P50 digested with XbaI and NgOMIV

volume reagent
6 µl P50 digested
2 µl CHS- (PCR 18)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

OMT+ (PCR 19) with P50 digested with XbaI and NgOMIV

volume reagent
4.45 µl P50 digested
3.55 µl OMT+ (PCR 19)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

OMT- (PCR 20) with P50 digested with XbaI and NgOMIV

volume reagent
3.87 µl P50 digested
4,13 µl OMT- (PCR 20)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

Negative control

volume reagent
5 µl P50 digested with XbaI and PstI or NgOMIV
3 µl ddH2O
1 µl T4 DNA-ligase
1 µl T4-ligase buffer (10x)
  • water bath 16 °C

Thursday, July 12th

Gelextraction and analytical digestion of CYC1-terminator, TEF1-promoter, and PGK1-Promoter from pSB1C3 and pSB1A2

Investigator: Georg

  • Genes from overnight cultures were extracted, using the Quiaprep gene extraction Kit. Extracted Plasmids then were analytically digested with XbaI and PstI (Fermentas).

Analytical digestion XbaI, PstI

Chemical Volume
XbaI 2,5 µl
PstI 2,5 µl
10xBuffer Tango 2 µl
Plasmid-DNA 2,5 µl
ddH2O 165,5 µl
=175µl TOTAL
  • Analytical gel was run (1% Agarose).

20120712-PGK1-P,-Cyc-T,-TEf.png

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 4/4)

Investigator: Martin, Jeff, Alois

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

  • The supernatants (~1l in total) of the two previous experiments were pooled and put into a rotary evaporater in order to acquire a concentrate of approximately 100ml.
  • The settings of the rotary evaporater: ~160 millibars, waterbath temperature of 25-30°C
  • Furthermore, there were measures to be taken to protect the solution from direct sunlight: blinds down, aluminum foil wrapped around the waterbath
  • Afterwards we transfered the Methanol solution into a separating funnel and added another 100ml of aqua dest..
  • By means of adding chloroform we created two phases. The lower (chloroform) phase with the solved Phycocyanobilin was separated and put into another rotary evaporater flask. This step was repeated three times in order to get all the Phycocanobilin into the next step
  • Then the chloroform was completely removed in the rotary evaporater (same settings as before), the pure (?) Phycocyanobilin in the flask was solved in 60 ml DMSO, transfered into a new flask and frozen at -20 °C.

Picking of transformated (pGADT7 and pGBKT7) E.coli cells on antibiotic selection plates

Investigator: Jeff

Aim of the experiment: pGADT7 and pGBKT7 are plasmids containing the transcriptional activation domain or the DNA binding domain of the transcription activator Gal4. pGADT7 contains the transcriptional activation domain of gal4; we want to clone the the first 100 residues of Pif3 (BBa_K365000) into this plasmid. As a result we have a fusion contruct of Gal4 and Pif3, which is nescassary for the light-switchable promoter system. pGBKT7 is for backup, if the ordered biobricks are not working.

Operational sequence:

  • A E. coli colony was picked for each plasmid and was transferred in a tube containing 4 ml of LB-medium containing antibiotics (Amp for pGADT7 and Kan for pGBKT7).
  • Overnight culture at 37 °C in a cell-culture shaker.

Miniprep of transformated E.coli from overnight culture (8 plasmids containing biobricks)

Investigator: Andrea

Aim of the experiment: Miniprep of transformated E. coli from overnight culture to get the plasmids with biobricks

NanoDrop Measure

Plasmid Concentration
P73 41.6 ng/µl
P74 85.2 ng/µl
P75 72.4 ng/µl
P76 254.3 ng/µl
P77 74.4 ng/µl
P78 50.0 ng/µl
P79 46.2 ng/µl
P80 116.7 ng/µl
P81 77.1 ng/µl
P82 65.5 ng/µl

Analytical digestion and gelelectrophoresis of biobricks (8 plasmids containing biobricks)

Investigator: Jeff

Aim of the experiment: Checking whether the biobricks are part of the plasmid-backbone.

Operational sequence:

  • Reaction batch for each plasmid:
Reagent Volume in µl
Tango Buffer 10x 4 µl
XbaI (Fermentas) 0.25 µl
PstI (Fermentas) 0.5 µl
Plasmid DNA 2.5 µl
ddH2O 12.75 µl
TOTAL 20 µl
  • Incubation at 37 °C for 1 h 45 min.
  • Analytical gelelectrophoresis at 90 V for 1 h.
  • Order of gel-pockets:
100 bp ladder P82 P81 P80 P79 P76 P75 P74 P73 1 kbp ladder
OK BAD OK OK OK OK OK BAD
  • P73 and P81, both parts from Havard university are bad. To exclude errors, one should pick another colony for each plasmid and do again the analytical digestion and gelelectrophoresis after the miniprep.

Analytical gelelectrophoresis with XbaI and PstI

Transformation of Ligationproducts of pTUM104 + OMT, 4Cl and CHS in E.coli

Investigator: Mary

  • adding 5µl ligation product in 100µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (Withouth antibiotica) and incubate at 37°C, 30 min, 180 rpm
  • plate on agar with Ampicillin over night

Repetition of PCR of PAL

Investigator: Daniela

Aim of the experiment: Repetition of PCR of PAL (so far not successful) with the use of different polymerase and try of 3 temperatures

only with PAL+, 3 different temperatures (see cycling parameters) and one batch at 52.5 °C with DMSO

Reaction batch

volume reagent
10 µl 5x Herculase II reaction buffer
0,5 µl dNTP Mix (each dNTP 2.5 mM)
1 µl Herculase II fusion DNA Polymerase
1,25 µl 1:10 dilution of used forward primers (O22)
1,25 µl 1:10 dilution of used reversed primers (O59)
1 µl 1:10 dilution of DNA (P19=pKS2µHyg-PAL-4CL-CHS 50 ng/µL) -> 5 ng/µL
35 µL ddH2O

Reaction batch with DMSO

volume reagent
10 µl 5x Herculase II reaction buffer
0,5 µl dNTP Mix (each dNTP 2.5 mM)
1 µl Herculase II fusion DNA Polymerase
1,25 µl 1:10 dilution of used forward primers (O22)
1,25 µl 1:10 dilution of used reversed primers (O59)
1 µl 1:10 dilution of DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL) -> 5 ng/µL
1,5 µl DMSO (3% des Ansatzes)
33.5 µL ddH2O

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 2 min
2 30 95°C 30 sec
52.5°C 30 sec
72°C 4 min
3 72°C 3 min

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 2 min
2 30 95°C 30 sec
45°C 30 sec
72°C 4 min
3 72°C 3 min

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 2 min
2 30 95°C 30 sec
56.2°C 30 sec
72°C 4 min
3 72°C 3 min

Analytical gel electrophoresis

  • no bands at all (picture follows)
  • possibly due to low concentration of P19 (5 ng/µl)

Ligation of P93 (pSB1C3 digested with XbaI and AgeI) with digested PCR-products of PCR 17-20 (CHS and OMT)

Investigator: Daniela

Concentration (Nano Drop:
CHS+ (PCR 17) = 46.1 ng/µl
CHS- (PCR 18) = 51.2 ng/µl
OMT+ (PCR 19) = 22.3 ng/µl
OMT- (PCR 20) = 16.7 ng/µl

P93 (digested with XbaI and AgeI) = 4.8 ng/µl


CHS+ (PCR17) with P93 digested with XbaI and AgeI

volume reagent
7.04 µl P93
0.96 µl CHS+ (PCR 17)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

CHS- (PCR 18) with P93 digested with XbaI and AgeI

volume reagent
7.13 µl P93
0.87 µl CHS- (PCR18)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

OMT+ (PCR19) with P93 digested with XbaI and AgeI

volume reagent
6.19 µl P93
1.81 µl OMT+ (PCR19)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

OMT- (PCR20) with P50 digested with XbaI and AgeI

volume reagent
5.75 µl P93
2.25 µl OMT- (PCR20)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

Negative control

volume reagent
5 µl P93
3 µl ddH2O
1 µl T4 DNA-ligase
1 µl T4-ligase buffer (10x)
  • water bath 16 °C
  • products were named P94-P97

Preparative digest of PCR1-PCR7 and P50

Investigator: Andrea

Digestion of P50 with XbaI and NgoMIV

volume reagent
20 µl P50
4 µl NEB Buffer
0.4 µl BSA
1 µl XbaI (10 U/µl)
2 µl NgoMIV (10 U/µl)
27.4 µl ddH2O

Digestion of PCR1-PCR7 with XbaI and AgeI

volume reagent
25 µl PCR-Product
5 µl NEB Buffer
0.5 µl BSA
1 µl XbaI (10 U/µl)
1 µl AgeI (10 U/µl)
32.5 µl ddH2O

Incubation: 37 °C, 3 h

Preparative gel electrophoresis of digested plasmids PCR1-PCR7 and PCR9

Investigator: Andrea

Aim of the experiment: Analytical gel electrophoresis of products from restriction digest of plasmids PCR1 - PCR7 and PCR9

Limonensynthase: 1600 bp

12.07.12 prep digest1.png

12.07.12 prep digest2.png

12.07.12 prep digest3.png

Ligation of digested PCR1-PCR7 (digested with XbaI and AgeI) with pSB1C3 (digested with XbaI and AgeI) and with pYESnew (digested with XbaI and NgoMIV)

Investigator: Andrea

Concentration (Nano Drop:
LIMS Citrus (PCR 1) = 13.4 ng/µl
LIMS Citrus (PCR 2) = 10.3 ng/µl
LIMS Lavendula (PCR 3) = 2.2 ng/µl
LIMS Lavendula (PCR 3) = 9.9 ng/µl
LIMS Lavendula (PCR 3) = 9.6 ng/µl
LIMS Lavendula (PCR 3) = 9.8 ng/µl
LIMS Lavendula (PCR 3) = 12.3 ng/µl

P50 (digested with XbaI and NgoMIV) = 10.3 ng/µl

P93 (digested with XbaI and AgeI) = 4 ng/µl


PCR1 with P50 digested with XbaI and AgeI/NgoMIV

volume reagent
4.89µl P50
3.11 µl PCR 1
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR2 with P50 digested with XbaI and AgeI/NgoMIV

volume reagent
4.38 µl P50
3.62 µl PCR2
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR3 with P50 digested with XbaI and AgeI/NgoMIV

volume reagent
1.64 µl P50
6.36 µl PCR3
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR4 with P50 digested with XbaI and AgeI/NgoMIV

volume reagent
4.3 µl P50
3.7 µl PCR4
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR5 with P50 digested with XbaI and AgeI/NgoMIV

volume reagent
4.26 µl P50
3.74 µl PCR5
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR6 with P50 digested with XbaI and AgeI/NgoMIV

volume reagent
4.26 µl P50
3.74 µl PCR6
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR7 with P50 digested with XbaI and AgeI/NgoMIV

volume reagent
7.83 µl P50
3.27 µl PCR7
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

Negative control

volume reagent
5 µl P50
3 µl ddH2O
1 µl T4 DNA-ligase
1 µl T4-ligase buffer (10x)


PCR1 with P93 digested with XbaI and AgeI

volume reagent
4.89 µl P93
3.11 µl PCR1
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR2 with P93 digested with XbaI and AgeI/NgoMIV

volume reagent
4.38 µl P93
3.62 µl PCR2
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR3 with P93 digested with XbaI and AgeI/NgoMIV

volume reagent
1.52 µl P93
6.48 µl PCR3
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR4 with P93 digested with XbaI and AgeI/NgoMIV

volume reagent
4.3 µl P93
3.7 µl PCR4
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR5 with P93 digested with XbaI and AgeI/NgoMIV

volume reagent
4.26 µl P93
3.74 µl PCR5
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR6 with P93 digested with XbaI and AgeI/NgoMIV

volume reagent
4.26 µl P93
3.74 µl PCR6
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR7 with P93 digested with XbaI and AgeI/NgoMIV

volume reagent
4.72 µl P93
3.28 µl PCR7
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)
  • water bath 16 °C
  • products were named P100-P115

Friday, July 13th

Transformation of ADH1-T

Procedure:

Investigator: Georg

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 2 µl of ADH-T plasmid was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

PCR of P73, P80 and P81 to add RFC25 pre- and suffix

Investigator: Jeff, Saskia

Aim of the experiment: Introducing RFC25 pre- and suffix into parts of P73, P80 and P81.

Operational sequence:

  • PCR reaction mixture
volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer (For P73: O46 (TUM12-PhyBGal4bd-fw); for P80: O31 (TUM12-LSPS-fw); for P81: O50 (TUM12-Phyb-fw))
1 µl 10 µM Reverse Primer (For P73: O47 (TUM12-PhyBGal4bd-rv); for P80: O32 (TUM12-LSPS-rv ); for P81: O51 (TUM12-Phyb-rv))
0.25 µL OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl Plasmid DNA (P80 or P73 or P81)
35.75 µL ELGA Water
=50 µL TOTAL
  • The gradient PCR program was performed after following scheme with following conditions (Tm=58  ΔG=5 °C; P73 in row 9(=61.1 °C); P80 in row 1 (=53.0 °C); P81 in row 7(=58.4 °C):
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
Tm=58 °C; ΔG=5 °C 150 s
68 °C 60 s
Final extension 68 °C 5 min
Hold 4 °C overnight

Miniprep, analcytical digestion and gelelectrophoresis of pGADT7 and pGBKT7

Investigator: Jeff, Saskia

Aim of the experiment:Miniprep, analcytical digestion and gelelectrophoresis of pGADT7 (tube P98, EcoRI and BamHI)and pGBKT7 (tube P99, BamHI and PstI)

Operational sequence:

  • Operated after standard protocol of the lab for analytical digestion and gelelectrophoresis.
  • Gel OK, like expected

Analytical digestion and gelelectrophoresis of pGADT7 (EcoRI and BamHI)and pGBKT7 (EcoRI and PstI).

Preperative digestion and gelelectrophoresis of P79 and O56

Investigator: Jeff, Saskia, Georg

Aim of the experiment: Preperativ gelelectrophoresis and gel of digested PCR product of LexA (NgoMIV+PstI) and pSB1C3 containing the RFC25 compatible 20aa linker with RFC25 pre- and suffix (AgeI and PstI).

Operational sequence:

  • Operated after standard protocol of the lab for preperative digestion and gelelectrophoresis.
  • Gel OK, like expected.

Preperative digestion and gelelectrophoresis of digested PCR product of LexA (NgoMIV+PstI) and pSB1C3 containing the RFC25 compatible 20aa linker with RFC25 pre- and suffix  (AgeI and PstI)??? Digestion with AgeI and PstI.

Preparative digest of P19

Investigator:Daniela, Ingmar

Digestion of P19 with ApaI

volume reagent
20 µl P19 (concentration: 53.8 ng/µl)
4 µl Buffer B
2 µl ApaI (10 U/µl)
14 µl ddH2O

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

  • gel: 1% with LMP-agarose
  • band 1: P50 digested with XbaI and PstI
  • band 2: P50 digested with XbaI and NgOMIV
  • 70 V, 90 min

Gelextration

  • cut the bands
  • QIAquick Gel Extractrion Kit was used
    • step 6 was left out
    • step 9: 30µl buffer, 4 min incubation

Gradient PCR of PAL to optimize the primer annealing temperature

Investigator: Ingmar

Aim of the experiment: As all PCR experiments to amplify the PAL gene contained in P19 failed, we decided to run a gradient PCR to optimize the primer annealing temperature.

PCR
Reaction batch

volume reagent
1 µl 10x Pfu Ultra II buffer
0.5 µl Plasmid P19 template
0.5 µl 1:10 dilution of O15 (10 pmol/µL)
0.5 µl 1:10 dilution of O59 (10 pmol/µL)
0.25 µl dNTP mix
7 µl ddH2O
0.25 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 29 95°C 30 sec
gadient 33-47.5 °C 1 min
68°C 3 min
3 1 68°C 5 min
4 1 4°C infinity
  • Verification of the PCR by agarose gel electrophoresis:

10 µl of each PCR tube was mixed with 2 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V in a 1% agarose gel.

Gel picture of gradient PCR of P19

  • A bond at the expected length of 2160 bp appears at 47 °C. Therefore a PCR using this primer annealing temperature will done on sunday.

Transformation of P94 - P97 (ligationproducts of pSB1C3 with CHS and OMT respectively) in E.coli

Investigator: Daniela

  • adding 5µl ligation product (P94-P97) in 100µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (Withouth antibiotica) and incubate at 37°C, 30 min, 180 rpm
  • plate on agar with Ampicillin over night

wrong antibiotica was used!!! Repetition follows!!! Nevertheless, some colonies could be observed.

Ligation of LIMS in pYESnew and pSB1C3

Investigator:Andrea

Transformation

  • adding 5µl ligation product (PCR1-PCR7) in 100µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min, 180 rpm
  • plate on agar with Ampicillin (pYESnew) or Chloramphenicol (pSB1C3) over night

Preparation of YPD medium

Investigator: A lot of Alois, Martin

Manual for YPD production Yeast Extract Peptone Dextrose Medium (1 liter)

  • 1% yeast extract
  • 2% peptone
  • 2% dextrose (D-glucose)

1. Dissolve the following in 1000 ml of water:

  • 10 g yeast extract
  • 20 g peptone
  • 20 g dextrose (see note below if making plates)

2. Autoclave for 20 minutes on liquid cycle.

3. Store medium at room temperature. The shelf life is approximately one to two months.

Sunday, July 15th

PCR purification of PCR products of P73, P80 and P81 and analytical gelelectrophoresis

Investigator: Jeff

Aim of the experiment: PCR was performed to introduce restriction sites to the gene of interest. MfeI and BamHI for P73 and RFC25 pre- and suffix for P80 and P81. The aim is to contruct fusion proteins with the aid of these restriction sites.

Operational sequence:

  • PCR cleaning with Qiagen PCR purification kit after manufacturer's protocol.
  • Analytical gelelectrophoresis (1% agarose) at 90  for 60&min.

PCR of P73, P80 and P81. As expected the only working PCR is P80 because the miniprep of P73 and P81 from Havard university are already corrupt!

PCR of PAL consless using the optimized primer annealing temperature of 47 °C

Investigator: Ingmar

Aim of the experiment: Amplification of the PAL gene contained in P19.

PCR
Reaction batch

volume reagent
5 µl 10x Pfu Ultra II buffer
2.5 µl Plasmid P19 template
2.5 µl 1:10 dilution of O15 (10 pmol/µL)
2.5 µl 1:10 dilution of O59 (10 pmol/µL)
1.25 µl dNTP mix
35 µl ddH2O
1.25 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 29 95°C 30 sec
47 °C 1 min
68°C 3 min
3 1 68°C 5 min
4 1 4°C infinity

PCR successful - Band at about 2,1 kb :

Analytical gelelectrophoresis of PCR product of PAL

Week 6

Monday, July 16th

Inoculation of ADH1-T (iGEM)

Investigator: Georg

  • Transformantion with ADH1-T didn't go well
  • By iGEM transformed cells with ADH1-T were inoculated onto Amp-LB-Plates
  • Cells were to grow at room-temperature over the weekend

Preparative digestion and gelelectrophoresis of P86 and P55

Investigator:Georg Aim of the experiment: Digestion of CYC1-Terminator, ADH1-Promoter for ligation

  • Preparative digestion after manufacturer's advice (NEB) with 20 u PstI and 20 u XbaI in 1x Tango buffer with 25 µl DNA and 4 µl NEB4 10x buffer and 0,4 µl 100x BSA. Water was added to a volume of 40 µl. Restriction time was 3 hours at 37 °C; 3 hours.
  • Preparative gelelectrophoresis after laboratory's standart protocol. (70 V, 90 min)

Preparative digestion ADH1-p, CYC1-t.png

  • Gel was stored at -20 °C.

Preperative digestion and gelelectrophoresis of P98 and PCR26

Investigator: Jeff, Georg

Aim of the experiment: Construction of Gal4AD-Pif3, a part of the light-switchable promoter system.

Operational sequence:

  • Preperative digestion after manufacturer's (Fermentas) advise for double-digestion for EcoRI+BamHI and MfeI(MunI)+BamHI; EcoRI+BamHI: Buffer 2X Tango™, 2-fold excess of BamHI; MfeI(MunI)+BamHI: Buffer G.
  • Preperative gelelectrohphoresis after laboratory's standard protocol. (70 V, 90 min)

TUM12 20120716 prep gel.jpg

Plating of received E. coli containing biobrick BBa_K165055

Investigator: Jeff

Aim of the experiment: The received biobrick BBa_K165055 (LexA binding sites + mCYC + Kozak + YFPx2 + ADH1 terminator) were already transformed in E. coli and were in an agar stabs. These E. coli cells were transferred with an inoculation loop on antibiotic selection plates and were incubated over night.

Operational sequence:

  • Bacterias containing plasmids with biobricks were transferred with a sterile inoculation loop on antibiotic plates and were incubated at 37 °C overnight.
  • The biobricks was BBa_K165055 in BBa_J63009 plasmid (AmpR, low copy plasmid)

Preparatory culture of S. cerevisiae

Investigator: Alois, Martin

Aim of the experiment: In order to have sufficient viable cells to inoculate an experimental culture in which we want to compare the growth rate of s. cerevisiae with a strain of brewing yeast (34/70 s. pastorianus weihenstephan) we aim to establish a preparatory over night culture.

Operational sequence: A sample of -80°C stored s. cerevisiae (glycerol stock) is used to inoculate 20ml of YPD-medium. This is shaken overnight at 30°C.

Miniprep of plasmids containing lavendula limonene synthase/citrus limonene synthase

Investigator: Lara

Aim of the experiment: Extract plasmids (pYESnew and pBS1C3) that contain limonene synthase/citrus limonene synthase.

Miniprep with Qiagen Kit; Plasmids p116-p122. Restriction digest with Xba1 and Pst1.

Plasmid DNA concentrations:

p116: 285 ng/µl

p117: 337 ng/µl

p118: 520 ng/µl

p119: 370 ng/µl

p120: 320 ng/µl

p121: 320 ng/µl

p122: 335 ng/µl

Restriction digest of p116-p122

Investigator: Lara

Aim of the experiment: Analytical restriction digest of plasmids p116, p117, p118, p119, p120, p121, p122.

volume reagent
2 µl DNA
2 µl Buffer 4
0,25 µl Xba1
0,25 µl Pst1-HF
15,3 µl ddH2O

Incubation: 37 °C; 1,5 h

Restriction digest with Xba1 and Pst1-HF.

Analytical gel electrophoresis of p116-p122

Investigator: Lara

Aim of the experiment: Analytical gel electrophoresis of products from restriction digest of plasmids p116, p117, p118, p119, p120, p121, p122.

p116: PCR1/pYES

p117: PCR2/pYES

p118: PCR4/pYES

p119: PCR4/pSB1C3

p120: PCR5/pYES

p121: PCR6/pYES

p122: PCR7/pYES

TUM12 LS gelelectrophoresis1607.png

Midiprep of pSB1C3 (RFC25-compatible)

Investigator:Mary

Aim of the experiment: Get a lot of pSB1C3 for further experiments

Midipreparation of the pellet from over night cultures (E.coli, Transformed with pSB1C3 - RFC25; name in registry: K365005)

was done with the Midiprep Kit from Qiagen

Result was named as P123 and had the concentration: 469,5 ng/µl (100µl at all)

PCR-Products of PAL (consless): digestion, extraction and ligation

investigator: Daniela, Mary

Aim of the experiment: digestion of PCR-Products to gain the correct cutting sites for ligation in pYES2 and pSB1C3 afterwards

Purification of PCR-Products with PCR-Purification Kit

  • digestion with Xba1 and HF-Age1 (both NEB)
volume reagent
25µl PCR-product
5µl Buffer NEB4
0.5µl BSA
1µl Xba1 (NEB; 20u/µl)
1µl HF-Age1 (NEB; 20u/µl)
17.5µl bidest. sterile H2O

digestion took 3h at 37°C

  • extraction from preparative gel:

TUM 12 PAL consless (digested with Xba Age).png

PCR of PAL+cons using the optimized primer annealing temperature of 47 °C

Investigator: Daniela

Aim of the experiment: Amplification of the PAL cons gene contained in P19.

PCR
Reaction batch

volume reagent
5 µl 10x Pfu Ultra II buffer
2.5 µl Plasmid P19 template
2.5 µl 1:10 dilution of O22 (10 pmol/µL)
2.5 µl 1:10 dilution of O59 (10 pmol/µL)
1.25 µl dNTP mix
35 µl ddH2O
1.25 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 29 95°C 30 sec
47 °C 1 min
68°C 3 min
3 1 68°C 5 min
4 1 4°C infinity

PCR was succesful, band at 2,1kb:

TUM12 120717 PCR PALconsens.jpg

Transformation of P94 - P97 (ligationproducts of pSB1C3 with CHS and OMT respectively) in E.coli

Investigator: Daniela

  • adding 5µl ligation product (P94-P97) in 100µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 45 min, 180 rpm
  • plate on agar with chloramphenicol over night

-> were succesfull: some colonies were grown

Tuesday, July 17th

Picking of ADH1-T colonies

Investigator: Georg

  • To 5 µl LB-Medium,5 µl of 1000x Amp were added
  • 5 colonies from the plate with ADH1-P were picked
  • Each colony was transferred into 5 ml LB-Medium with Chloramphenicol
  • Incubation over night at 37°C in the 180rpm cell-culture shaker.

Picking of transformed E. coli containing biobrick BBa_K165055

Preparative digest of P123 (pSB1C3 RFC25)

Investigator: Mary, Daniela

Digestion of P123 with Xbal/PstI and XbaI/AgeI

volume reagent
23.1 µl ddH2O
4 µl NEB4
0.4 µl 10x BSA
1 µl XbaI (20 U/µl)
1.5 µl PstI (10U/µl)
10 µl P123
volume reagent
23.35 µl ddH2O
4 µl NEB4
0.4 µl 10x BSA
1 µl XbaI (20 U/µl)
1.25 µl AgeI (10U/µl)
10 µl P123

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

  • gel: 1% with LMP-agarose
  • band 1: P123 digested with XbaI and PstI
  • band 2: P123 digested with XbaI and AgeI
  • 70 V, 90 min

Gelextration

  • cut the bands
  • QIAquick Gel Extractrion Kit was used
    • step 6 was left out
    • step 9: 30µl buffer, 4 min incubation

Products were names as follows:

  • P123 digested with XbaI and PstI: P132
  • P123 digested with XbaI and AgeI: P133

PCR-Products of PAL (with consensussequence): digestion and extraction

investigator: Daniela, Mary

Aim of the experiment: digestion of PCR-Products to gain the correct cutting sites for ligation in pTUM104 and pSB1C3 afterwards

Purification of PCR-Products with PCR-Purification Kit

  • digestion with Xba1 and HF-Age1 (both NEB)
volume reagent
25µl PCR-product
5µl Buffer NEB4
0.5µl BSA
1µl Xba1 (NEB; 20u/µl)
1µl HF-Age1 (NEB; 20u/µl)
17.5µl bidest. sterile H2O

digestion took 3h at 37°C

  • extraction from preparative gel:

TUM12 120717 PAL+ prepGel.jpg

Picking Clones of CHS and OMT in pSB1C3-RFC25

investigator: Daniela, Mary

Aim of the experiment: preculture over night for the miniprep next day

Repetition of ligation of PCR 15-20 (4CL, CHS and OMT) with pTUM104 (P71 and P72 respectively)

Investigator: Mary, Daniela

Concentration (Nano Drop:
4CL+ (PCR 15) = 40.3 ng/µl
4CL- (PCR 16) = 37.3 ng/µl
CHS+ (PCR 17) = 46.1 ng/µl
CHS- (PCR 18) = 51.2 ng/µl
OMT+ (PCR 19) = 22.3 ng/µl
OMT- (PCR 20) = 16.7 ng/µl

P50 digested with XbaI and PstI = 23.9 ng/µl (the digested Plasmid has the number P71)
P50 digested with XbaI and NgOMIV = 28.4 ng/µl (the digested Plasmid has the number P72)

  • required volumes were calculated using Lab Tools

4CL+ (PCR 15) with P71

volume reagent
5.27 µl P71
2.73 µl 4CL+ (PCR 15)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

4CL- (PCR 16) with P71

volume reagent
5.13 µl P71
2.87 µl 4CL- (PCR 16)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

CHS+ (PCR 17) with P72

volume reagent
5.84 µl P72
2.16 µl CHS+ (PCR 17)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

CHS- (PCR 18) with P72

volume reagent
6 µl P72
2 µl CHS- (PCR 18)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

OMT+ (PCR 19) with P72

volume reagent
4.45 µl P72
3.55 µl OMT+ (PCR 19)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

OMT- (PCR 20) with P72

volume reagent
3.87 µl P72
4,13 µl OMT- (PCR 20)
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

Negative control

volume reagent
5 µl P71 or P72
3 µl ddH2O
1 µl T4 DNA-ligase
1 µl T4-ligase buffer (10x)
  • water bath 16 °C

Transformation of ligationproducts of 4CL, OMT and CHS respectively in pTUM104 in E.coli

Investigator: Mary,Daniela

  • adding 5µl ligation product in 100µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 45 min, 180 rpm
  • plate on agar with ampicillin over night

results:

  • CHS+ in pTUM104 (P72) 100 µl: 7 clones
  • CHS- in pTUM104 (P72) 100 µl: 9 clones
  • CHS+ in pTUM104 (P72) Pellet: 111 clones
  • CHS- in pTUM104 (P72) Pellet: 77 clones
  • 4CL+ in pTUM104 (P71) 100 µl: 9 clones
  • 4CL- in pTUM104 (P71) 100 µl: 3 clones
  • 4CL+ in pTUM104 (P71) Pellet: 47 clones
  • 4CL- in pTUM104 (P71) Pellet: 45 clones
  • OMT+ in pTUM104 (P72) 100 µl: 7 clones
  • OMT- in pTUM104 (P72) 100 µl: 5 clones
  • OMT+ in pTUM104 (P72) Pellet: 30 clones
  • OMT- in pTUM104 (P72) Pellet: 53 clones
  • negative control P71 100 µl: 14
  • negative control P71 Pellet: 71
  • negative control P72 100 µl: 7
  • negative control P72 Pellet: 64

Inoculation of YPD medium with S. cerevisiae and brewing yeast strain 34/70 (part 1/3)

investigator: Maddin, Aloisius

Aim of the experiment: Discrimination of growing ability in wort medium

4 different worts:

  • 21%, without hop
  • 21%, without hop, autoclaved
  • 16%, with hop
  • 16%, with hop, autoclaved

were diluted with ELGA to a solution of 12%. These 4 different worts were inoculated with 5ml of preparatory culture of S. cerevisiae and 1ml of brewing yeast strain 34/70 (provided by the Forschungsbrauerei, Weihenstephan). Start OD was measured at 550nm (for table see next experiment). Those 8 flasks were incubated over night at room temperature and 130 rpm.

Wednesday, July 18th

Minipreparation of ADH1-T Plasmids

Investigator: Georg

  • ADH1-T Plasmids were extracted according to protocoll of Quiaprep gelextraction protocoll

Analytical digestion of ADH1-T and gelelectrophoresis

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
1,25 µl PstI-HF (NEB)
1,25 µl XbaI (NEB)
5 µl NEB-4 buffer
0,5 µl 100 x BSA (NEB)
79,5 µl dd H20
= 87,5µl TOTAL
  • 17,5 µl Mastermix were added to 2,5 µl plasid DNA

20120718 BBa j63002.PNG

  • They have sent the wrong insert

Ligation of plasmid pSB1C3 containing 20aaLinker with LexA and plasmid containing Gal4AD with Pif3 for fusion protein construction

Miniprep of overnight culture from picked transformed E. coli containing biobrick BBa_K165055

Inoculation of YPD medium with S. cerevisiae and brewing yeast strain 34/70 (part 2/3)

Investigators: Martin, Alois

Aim of the experiment: Discrimination of growing ability in wort medium.

After 12h of cultivating the optical density (OD) at 550nm was determined:

Assay Yeast Autoclaved Hop OD 0h OD 12h delta OD
A1 S. cerevisae No No 1.2 2.2 + 1.0
A2 S. cerevisae Yes No 2.0 2.6 + 0.6
A3 S. cerevisae No Yes 1.8 2.4 + 0.6
A4 S. cerevisae Yes Yes 2.4 2.7 + 0.3
B1 34/70 No No 1.6 2.5 + 0.9
B2 34/70 Yes No 3.0 2.9 - 0.1
B3 34/70 No Yes 2.2 2.5 + 0.3
B4 34/70 Yes Yes 2.7 2.8 + 0.1

After 12h of cultivating the S. cerevisiae is growing quite well. There is a tendency that the brewing yeast strain 34/70 is not capable to grow sufficiently in autoclaved (e.g. proteinfree) medium. Since the 34/70 was stored at 4°C over 5 days, directly used to inoculate the medium (no preparatory culture) and we only used 1ml to inoculate with (compared to 5ml of the preparatory culture of S. cerevisiae - because of obvious differences in opacity of the inoculation media) there is not yet a conclusion to be drawn. We decided to incubate for another 24h at least.

New Miniprep of P50 pTUM104

Investigators: Andrea

NanoDrop concentration: 303.6 ng/µl (260/280: 1.89)

Transformation of P50 (pTUM104) in E.coli

Investigator: Katrin

Aim of the experiment: Get more P50(pTUM104) for further experiments

  • adding 2-3 µl of plasmid P50 in 100µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (withouth antibiotica) and incubate at 37°C, 30 min, 180 rpm
  • plate on agar with Ampicillin over night

Ligation of 4CL and PAL in pSB1C3-RFC25 and ligation of PAL in pTUM104

Investigator: Katrin, Daniela

Concentration (Nano Drop:
4CL+ (PCR 15) = 40.3 ng/µl
4CL- (PCR 16) = 37.3 ng/µl
PAL+ (PCR 32) = 25 ng/µl
PAL- (PCR 33) = 16.8 ng/µl

P132 (pSB1C3-RFC25 digested with Xbal and Pstl) = 33.5 ng/µl
P133 (pSB1C3-RFC25 digested with Xbal and AgeI) = 41.8 ng/µl

  • required volumes were calculated using Lab Tools

4CL+ (PCR 15) with P132 (pSB1C3-RFC25)

volume reagent
2.64 µl P132
5.36 µl 4CL+ (PCR 15)
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
9 µl ddH2O

4CL- (PCR 16) with P132 (pSB1C3-RFC25)

volume reagent
2.51 µl P132
5.49 µl 4CL- (PCR 16)
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
9 µl ddH2O

PAL+ (PCR 32) with P133 (pSB1C3-RFC25)

volume reagent
1.29 µl P133
6.71 µl PAL+ (PCR 32)
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
9 µl ddH2O

PAL- (PCR 33) with P133 (pSB1C3-RFC25)

volume reagent
0.91 µl P133
7.09 µl PAL- (PCR 33)
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
9 µl ddH2O

PAL+ (PCR 32) with P72 (pTUM104)

volume reagent
3.55 µl P72
4.45 µl PAL+ (PCR 32)
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
9 µl ddH2O

PAL- (PCR 33) with P72 (pTUM104)

volume reagent
2.79 µl P72
5.21 µl PAL- (PCR 33)
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
9 µl ddH2O

Negative control:

volume reagent
5 µl P72, P132 or P133
12 µl ddH2O
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
  • water bath 16 °C

Miniprep of CHS and OMT in pSB1C3-RFC25

Investigator: Daniela

Aim of the experiment: Extract plasmids (pSB1C3-RFC25) that contain CHS and OMT

QIAprepS Spin Miniprep Kit

  • step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

the Minipreps were named as follows:

  • P135: CHS+ in pSB1C3-RFC25 (c = 150.9 ng/µl)
  • P136: CHS- in pSB1C3-RFC25 (c = 204 ng/µl)
  • P137: OMT+ in pSB1C3-RFC25 (c = 179.3 ng/µl)
  • P138: OMT- in pSB1C3-RFC25 (c = 146.7 ng/µl)

Control digest of CHS and OMT in pSB1C3-RFC25

Investigator: Katrin, Daniela

Aim of the experiment: Test whether the ligation of CHS and OMT in pSB1C3 was successful

volume reagent
2.5 µl P135 / P136 / P137 / P138
0.25 µl Xbal (20U/µl)
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
0.2 µl BSA (100x)
14.8 µl ddH2O

TUM12 20120718 P135-P138.jpg

  • pSB1C3: 2070 bp
  • CHS: 1173 bp
  • OMT: 1059 bp

It seems as if the ligation was successful. However it is strange that the band of OMT is lower that the one of CHS. we had the wrong information about the length of OMT -> the right length of OMT is 1059 bp, so everything is fine :)

Picking clones of 4CL, CHS and OMT in pTUM104

investigator: Katrin, Daniela

Aim of the experiment: preculture over night for the miniprep next day

Thursday, July 19th

Transformation of P124+PCR29 and P126+PCR31

Investigator: Daniela

Aim of the experiment: Transformation of the ligation of P124+PCR29 and P126+PCR31 overnight, to see if ligation has been successful.

Operational sequence:

  • P124+PCR29 ->Chlp
  • negative control: NK1 ->Chlp
  • P126+PCR31 ->Amp
  • negative control: NK2 ->Amp
  • adding 5µl ligation product in 100 µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min for ampicillin and 45 min for chloramphenicol, 180 rpm
  • plate on agar with ampicillin or chloramphenicol over night

EDIT from 20.07.2012: Unfortunately, no colonies for P124+PCR29 can be identified but colonies on from the concentrated pellet of P126+PCR31 ligation, BUT more but very small colonies on the control plate from the pellet. For further identification the colonies of the ligation has been picked on 21.07.2012 for miniprep and analytical digestion and gelelectrophoresis.

Restriction digest of P79

Investigator: Roman

Aim of the experiment: Double digest of p79 with Xba1 and Age1 to prepair it for ligation with an N- terminal nuclear localization signal sequence

40 µl composition

  • 18 µl plasmid DNA
  • 1 µl Age1
  • 1 µl Xba1
  • 4 µl NEBuffer 4 (10x)
  • 15,6 µl ddH2O
  • 0,4 µl BSA (100x)

The mixture was incubated over night at 37 °C

Oligohybridization of single-stranded DNA for creating SV40 nuclear localization signal for fusion proteins for translocating them into the nucleus

Investigator: Jeff

Aim of the experiment: Oligohybridization of single-stranded DNA (TUM12-SV40-fw and TUM12-SV40-rv)for creating SV40 nuclear localization signal for fusion proteins for translocating them into the nucleus

Operational sequence:

  • 25 µL of 100 pM of TUM12-SV40-fw and 25 µL of 100 pM TUM12-SV40-rv in one ERG
  • Heating up to 95 °C for 30 min
  • Cooling at RT in a styropor box overnight.

Inoculation of YPD medium with S. cerevisiae and brewing yeast strain 34/70 (part 3/3)

Investigators: Andrea, (Martin, Alois)

Aim of the experiment: Discrimination of growing ability in wort medium.

After 40h of cultivating the optical density (OD) at 550nm was determined:

Assay Yeast Autoclaved Hop OD 0h OD 12h OD 40h delta OD
A1 S. cerevisae No No 1.2 2.2 2.5 + 1.3
A2 S. cerevisae Yes No 2.0 2.6 2.7 + 0.7
A3 S. cerevisae No Yes 1.8 2.4 2.6 + 0.8
A4 S. cerevisae Yes Yes 2.4 2.7 2.8 + 0.4
B1 34/70 No No 1.6 2.5 2.8 + 1.2
B2 34/70 Yes No 3.0 2.9 3.0 0
B3 34/70 No Yes 2.2 2.5 2.8 + 0.6
B4 34/70 Yes Yes 2.7 2.8 2.9 + 0.2

After 40h of cultivating the S. cerevisiae is growing comparably to the brewing yeast strain, though we seem to have entered a phase of substrate limitation. Autoclaved media lack solved protein and is thus for neither of the yeasts a satisfying medium; added hop also represses their growth (S. cerevisiae shows a higher susceptability - which seems logic, since the brewing yeast is selected to survive and prosper in beer brewing environment).

The next step would be to brew with our "laboratory strain" S. cerevisiae.

Preparative digest of PCR1 and PCR2 and P50 and P123

Investigator: Andrea

Digestion of PCR1 and PCR2 with XbaI and AgeI

volume reagent
10 µl PCR-Product
2 µl NEB Buffer
0.2 µl BSA
1 µl XbaI (10 U/µl)
1 µl AgeI (10 U/µl)
7 µl ddH2O

Digestion of P50 with XbaI and NgoMIV

volume reagent
10 µl P50
4 µl NEB Buffer
0.4 µl BSA
1 µl XbaI (10 U/µl)
2 µl NgoMIV (10 U/µl)
22.6 µl ddH2O

Digestion of P123 with XbaI and AgeI

volume reagent
20 µl P123
4 µl NEB Buffer
0.4 µl BSA
1 µl XbaI (10 U/µl)
1 µl AgeI (10 U/µl)
14 µl ddH2O

Incubation: 37 °C, 3 h

Preparative gel of pSB1C3 and pTUM104

Investigator: Andrea

  • 40 µl pSB1C3 + 4 µl loading dye
  • 40 µl pTUM104 + 4 µl loading dye
  • 20 µl PCR1 + 2 µl loading dye
  • Limonensynthase: 1600 bp
  • pTUM104: 5800 bp
  • pSB1C3: 2000bp

19.07.12-prep-gel.png

Ligation of digested PCR1 (digested with XbaI and AgeI) with pSB1C3 (digested with XbaI and AgeI)

Investigator: Andrea

Concentration (Nano Drop:
LIMS Citrus (PCR 1) = 18.6 ng/µl
P50 (digested with XbaI and NgoMIV) = 24.9 ng/µl
P123 (digested with XbaI and AgeI) = 44.5 ng/µl


PCR1 with P123 digested with XbaI and AgeI/NgoMIV

volume reagent
1.19µl P123
6.81 µl PCR 1
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)
  • water bath 16 °C over night

Miniprep of 4CL, CHS and OMT in pTUM104 (P71 and P72)

Investigator: Daniela

Aim of the experiment: Extract plasmids (pTUM104) that contain 4CL, CHS and OMT

The day before 2 clones were picked for each enzyme.

QIAprepS Spin Miniprep Kit

  • step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

Concentration:

  • 4CL+ in pTUM104 clone 1: c = 172.5 ng/µl
  • 4CL- in pTUM104 clone 1: c = 192.1 ng/µl
  • CHS+ in pTUM104 clone 1: c = 136.6 ng/µl
  • CHS- in pTUM104 clone 1: c = 85.7 ng/µl
  • OMT+ in pTUM104 clone 1: c = 116.0 ng/µl
  • OMT- in pTUM104 clone 1: c = 129.7 ng/µl
  • 4CL+ in pTUM104 clone 2: c = 160.0 ng/µl
  • 4CL- in pTUM104 clone 2: c = 144.5 ng/µl
  • CHS+ in pTUM104 clone 2: c = 128.5 ng/µl
  • CHS- in pTUM104 clone 2: c = 116.2 ng/µl
  • OMT+ in pTUM104 clone 2: c = 142.8 ng/µl
  • OMT- in pTUM104 clone 2: c = 134.5 ng/µl

Control digest of 4CL, CHS and OMT in pTUM104

Investigator: Daniela

Aim of the experiment: Test whether the ligation of 4CL, CHS and OMT in pTUM104 was successful

volume reagent
2.5 µl 4CL+ in pTUM104 clone 1 / 4CL- in pTUM104 clone 1
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
0.2 µl BSA (100x)
14.8 µl ddH2O
volume reagent
3 µl 4CL+ in pTUM104 clone 2
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
0.2 µl BSA (100x)
14.3 µl ddH2O
volume reagent
3.5 µl 4CL- in pTUM104 clone 2
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
0.2 µl BSA (100x)
13.8 µl ddH2O
volume reagent
3.5 µl CHS+ in pTUM104 clone 1 / OMT+ in pTUM104 clone 1 / OMT- in pTUM104 clone 1 / CHS+ in pTUM104 clone 2 / OMT+ in pTUM104 clone 2 / OMT- in pTUM104 clone 2
0.25 µl Xbal (20U/µl)
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
0.2 µl BSA (100x)
13.8 µl ddH2O
volume reagent
4 µl CHS- in pTUM104 clone 2
0.25 µl Xbal (20U/µl)
0.25 µl AgeI(20U/µl)
2 µl NEB4 (10x)
0.2 µl BSA (100x)
13.3 µl ddH2O
volume reagent
5 µl CHS- in pTUM104 clone 1
0.25 µl Xbal (20U/µl)
0.25 µl AgeI(20U/µl)
2 µl NEB4 (10x)
0.2 µl BSA (100x)
12.3 µl ddH2O

expected bands:

  • pTUM104: about 5800bp
  • 4CL: 1685bp
  • CHS: 1173bp
  • OMT: 1222bp

TUM 12 20120719 4CL, CHS, OMT in pYES clones1.jpg TUM 12 20120719 4CL, CHS, OMT in pYES clones2.jpg

Transformation of ligationsproducts of 4CL and PAL in pSB1C3-RFC25 and of PAL in pTUM104 in E.coli (see July, 18th)

Investigator: Daniela

  • 4CL+ (PCR15) in pSB1C3-RFC25 (P132) ->Chlp
  • 4CL- (PCR16) in pSB1C3-RFC25 (P132) ->Chlp
  • PAL+ (PCR32) in pSB1C3-RFC25 (P133) ->Chlp
  • PAL- (PCR33) in pSB1C3-RFC25 (P133) ->Chlp
  • PAL+ (PCR32) in pTUM104(P72) ->Amp
  • PAL- (PCR33) in pTUM104(P72) ->Amp
  • negative control: P72 ->Amp
  • negative control: P132 ->Chlp
  • negative control: P133 ->Chlp
  • adding 5µl ligation product in 100 µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min for ampicillin and 45 min for chloramphenicol, 180 rpm
  • plate on agar with ampicillin or chloramphenicol over night

Friday, July 20th

Preparative Digestion of PGK1-P, TEF2-T, TEF1-P and gelelectrophoresis

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
3,3 µl PstI-HF (NEB)
3,3 µl XbaI (NEB)
13,2µl NEB-4 buffer
1,32 µl 100 x BSA (NEB)
44,88 µl dd H20
=72µl TOTAL
  • 20 µl preparative mastermix were mixed with 20 µl of plasmid-DNA
  • Preparative gelelectrophoresis was processed for 90 min at 70 V

20120720 tef2 pgk1.PNG 20120720 TEF1-Promoter.PNG

Gel purification of Xba1/ Age1 digested P79

Investigator: Roman

Aim of the Experiment: Aim of the experiment is the purification of the double digested vector p79 (pSB1C3_RFC25_Linker), in which the N- terminal SS is to be cloned.

Operational sequence:

  • The mixture was seperated by gel electrophoresis (LMP agarose)
  • The DNA was cut out of the gel (2 pieces) and weight ==> 200 mg each piece.
  • Afterwards the plasmid DNA was extracted as described in the Quiagen Gel Purification protocol.Elution was performed in two steps (à 25 µl) with elution buffer (heated up to 40°). To improve the yeald of plasmid DNA during the elution, the column was incubated at RT for about 4 minutes before centrifugation

Miniprep of transformed E. coli XL1-Blue with pTUM104 new from P50 tube (4x), BBa_K365005 (4x), BBa_K207000 (1x)and BBa_K207001 (1x)

Investigator: Jeff

Aim of the study:: Miniprep

Operational sequence:

  • Miniprep has been performed after manufacturer's protocol. QIAGEN - QIAprep Spin Miniprep Kit.

Analytical digestion and gelelectrophoresis of P152, P155, P156, P157, P158, P159, P160, P161

Investigator: Jeff

Aim of the study: Analytical digestion and gelelectrophoresis of P152, P155, P156, P157, P158, P159, P160, P161, to prove the insert and backbone size.

Operational sequence:

  • Analytical digestion and gelelectrophoresis were performed after lab's standard protocol.
  • Digestion with XbaI and PstI-HF in Buffer 4.

TUM12 20120720 anal.jpg

Picking from the overnight transformation of the ligated P126+PCR31

Investigator: Jeff

Aim of the study: Picking from the overnight transformation of the ligated P126+PCR31, to see whether ligation is successful or not.

Operational sequence:

  • Picking and overnight culture after standard laboratory's protocol. (AmpR LB-medium)

PCR of P23 (LexA, BBa_K105005) to indroduce RFC25 pre- and suffix because last ligation was not successful

Investigator: Jeff

Aim of the experiment: Last ligation with LexA was not successful and the tube with the PCR product was empty from the ligation, so one has to do another PCR for another ligation.

Operational sequence:

  • Clone 3 (tube P23) of BBa_K105005 (LexA) has beed choosen for the PCR.

PCR reaction mixture

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer
1 µl 10 µM Reverse Primer
0.25 µL OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl Plasmid DNA (BBa_K105005) from P23 (Clone 3)
35.75 µL ELGA Water
=50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
55 °C 60 s
68 °C 60 s
Final extension 68 °C 5 min
Hold 4 °C overnight
  • Freezed at -20 °C. Stil has to be purified with PCR purification kit on the next day

Control digest of pTUM104 (P153 and P154)

Investigator: Mary, Ingmar, Daniela

Aim of the experiment: Test whether the vector pTUM104 is right.

volume reagent
1.5 µl P153
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
16.25 µl ddH2O
volume reagent
1.5 µl P153
0.25 µl Xbal (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
14.25 µl ddH2O
volume reagent
1.5 µl P153
0.25 µl Xbal (20U/µl)
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
14 µl ddH2O
volume reagent
1.5 µl P153
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
14 µl ddH2O
volume reagent
1.5 µl P153
0.25 µl NgoMIV (10U/µl)
2 µl NEB4 (10x)
16.25 µl ddH2O
volume reagent
1.5 µl P153
0.25 µl NgoMIV (10U/µl)
0.25 µl PstI (20U/µl)
0.25 µl SpeI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
13.75 µl ddH2O
volume reagent
2.8 µl P154
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
14.95 µl ddH2O
volume reagent
2.8 µl P154
0.25 µl Xbal (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
12.95 µl ddH2O
volume reagent
2.8 µl P154
0.25 µl Xbal (20U/µl)
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
12.7 µl ddH2O
volume reagent
2.8 µl P154
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
12.7 µl ddH2O
volume reagent
2.8 µl P154
0.25 µl NgoMIV (10U/µl)
2 µl NEB4 (10x)
14.95 µl ddH2O
volume reagent
2.8 µl P154
0.25 µl NgoMIV (10U/µl)
0.25 µl PstI (20U/µl)
0.25 µl SpeI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
12.45 µl ddH2O
  • P153

TUM12 20120720analyt.verdau P153.jpg

  • P154

TUM12 20120720 ana verdau P154.jpg

The vector seems to be correct. However NgoMIV did not digest the plasmid properly.

Saturday, July 21st

Miniprep of transformed E. coli XL1-Blue with ligation product of P126+PCR31

Investigator: Jeff

Aim of the study: Miniprep

Operational sequence:

  • Miniprep has been performed after manufacturer's protocol. QIAGEN - QIAprep Spin Miniprep Kit.

Analytical digestion and gelelectrophoresis of the minipreps of transformed E. coli XL1-Blue with ligation product of P126+PCR31

Investigator: Jeff

Aim of the experiment: To see whether ligation ist successful.

  • Reaction batch for each plasmid:
Reagent Volume in µl
Tango Buffer 10x 4 µl
NdeI (Fermentas) 0.5 µl
BamHI (Fermentas) 0.5 µl
Plasmid DNA 2.5 µl
ddH2O 12.5 µl
TOTAL 20 µl
  • Incubation at 37 °C for 1 h 30 min.
  • Analytical gelelectrophoresis at 90 V for 1 h.
  • Order of gel-pockets:
100 bp ladder P172 P173 P174 1000 bp ladder
corrupt corrupt corrupt

TUM12 20120721 anal.jpg

  • Ligation was not successful!

PCR purification of PCR products from P23

Investigator: Jeff

Aim of the experiment Purification of PCR products from P23.

Operational sequence:

  • The 4 tubes with PCR products of P23 were purificated with the PCR purification kit from Qiagen after manufacturer'S protocol.

Sunday, July 22nd

Preparative digest of pTUM104 RFC25 and ligation with PCR products PCR 15 - 20 and 32+33

Investigator: Ingmar

Aim of the experiment: Intsert the genes of PAL, 4CL, CHS and OMT in pTUM104 RFC 25 in order to test their expression in yeast.

Preparative digest of P 154 with XbaI and NgoMIV and of P 153 with XbaI and PstI

volume reagent
7 µl ddH2O
2.5 µl NEB 4 buffer
2.5 µl Tango buffer
4 µl XbaI (10 U/µl)
4 µl NgoMIV (10 U/µl)
30 µl P 153
volume reagent
10 µl ddH2O
4 µl Tango buffer
2 µl XbaI (10 U/µl)
4 µl PstI (10 U/µl)
20 µl P 154

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

  • gel: 1% with LMP-agarose
  • Each digest product was mixed with an adequate volume of DNA loading buffer and loaded into the gel
  • The separation process lasted 90 min at 70 V.

Gel picture of control digest with PstI

  • All digest products show the expected bonds at 5849 bp (digest with XbaI and NgoMIV) and 5785 bp (digest with XbaI and PstI) respectively.

Gelextration

  • cut the bands
  • QIAquick Gel Extractrion Kit was used
    • step 6 was left out
    • step 9: 30µl buffer, 4 min incubation

Products were named as follows:

  • P154 digested with XbaI and NgoMIV: P175
  • P153 digested with XbaI and PstI: P176

Ligation

PCR product Volume Vector Volume Volume T4 DNA Ligase Volume T4 DNA Ligase buffer Volume ddH20 New Plasimd Number
PCR15 5.25 P 176 2.75 1 µl 2 µl 9 µl P 177
PCR16 5.25 P 176 2.75 1 µl 2 µl 9 µl P 178
PCR 17 7.2 P 175 0.8 1 µl 2 µl 9 µl P 179
PCR 18 7.2 P 175 0.8 1 µl 2 µl 9 µl P 180
PCR 19 7.1 P 175 0.9 1 µl 2 µl 9 µl P 181
PCR 20 7.1 P 175 0.9 1 µl 2 µl 9 µl P 182
PCR 32 7.25 P 175 0.75 1 µl 2 µl 9 µl P 183
PCR 33 7.5 P 175 0.5 1 µl 2 µl 9 µl P 184

Week 7

Monday, July 23rd

Miniprep of PAL, 4CL in pSB1C3 and PAL in pTUM104

Investigator: Mary

Aim of the experiment: Extract plasmids (pTUM104 and pSB1C3-RFC25) that contain 4CL and PAL´

The day before one clone were picked for each enzyme from plates from 19th July 2012.

QIAprepS Spin Miniprep Kit

  • step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

Concentration:

  • 4CL+ (PCR15) in pSB1C3-RF25 (P132): c = 340 ng/µl -> new name of Ligationproduct after Miniprep: P185
  • 4CL- (PCR16) in pSB1C3-RF25 (P132): c = 385 ng/µl -> new name of Ligationproduct after Miniprep: P186
  • PAL+ (PCR32) in pSB1C3-RF25 (P133): c = 395 ng/µl -> new name of Ligationproduct after Miniprep: P187
  • PAL- (PCR33) in pSB1C3-RF25 (P133): c = 255 ng/µl -> new name of Ligationproduct after Miniprep: P188
  • PAL+ (PCR32) in pTUM104 (P72): c = 190 ng/µl
  • PAL- (PCR33) in pTUM104 (P72): c = 238 ng/µl

Control digest of 4CL, PAL in pSB1C3-RFC25 and PAL in pTUM104

Investigator: Mary

Aim of the experiment: Test whether the ligation of 4CL, PAL in pSB1C3-RFC25 and PAL in pTUM104 was successful

Plasmids are taken from miniprep from 23.07.2012

volume reagent
2.5 µl 4CL+ in pSB1C3-RFC25 / 4CL- in pSB1C3-RFC25
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
13 µl ddH2O
volume reagent
2.5 µl PAL+ in pSB1C3-RFC25 / PAL- in pSB1C3-RFC25
0.25 µl Xbal (20U/µl)
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
13 µl ddH2O
volume reagent
2.5 µl PAL+ in pSB1C3-RFC25 / PAL- in pSB1C3-RFC25
0.25 µl Xbal (20U/µl)
0.25 µl AgeI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
13 µl ddH2O

expected bands:

  • pTUM104: about 5800bp
  • pSB1C3-RFC25: 2070bp
  • 4CL: 1685bp
  • PAL: 2151bp

TUM12 120723 kontrollverdau wdh.jpg

Ligation of PAL+/- in pTUM104 was not succesful Ligation of PAL+/- and 4CL+/- in pSB1C3-RFC25 were succesful! (pSB1C3 is overlapping with PAL)

APT Solubilisation and Transformation

Investigator: Mary

Aim of the experiment: solubilisation of the synthetic gene of APT and transformation of sent plasmid (including APT) in E.coli to copy it if necessary

short zentrifugation of sent product and adding 50µl bidest. H2O to it (5µg in 50µl = concentration of 0.1 µg/µl) the dissolved product was named as G1 (as Geneproduct number 1) and stored at -20°C

2µl of solved product used for transformation in Ecoli (Kit of Quiagen) and Amp-resistance (said GeneArt) Plating cells on Agar with Amp, 37°C over night

Preparative digest of APT

Investigator: Mary

Aim of the experiment: Extraction of the sequence of APT out of the sent plasmid.

volume reagent
10µl ddH2O
4 µl NEB 4 buffer
4 µl BSA (10x)
1 µl XbaI (20 U/µl)
1 µl AgeI (20 U/µl)
20 µl solubilised APT-product (see Solubilisation APT)

Incubation: 37°C, 2.5h

Bond at 1244bp as expected:

TUM12 120723 prepGel von APT.jpg

The bond was cutted out of the gel and stored at -20°C (P189)

Transformation of ligationsproducts of 4CL, CHS, OMT and PAL in pTUM104 in E.Coli (Ligation see 22th of July)

Investigator: Mary

Aim of the experiment: ligation of enzymes in pTUM104 to transform it into yeast if this was successful.

  • 4CL+ (PCR15) in pYES (P176) -> new name: P177
  • 4CL- (PCR16) in pYES (P176) -> new name: P178
  • CHS+ (PCR17) in pYES (P175) -> new name: P179
  • CHS- (PCR18) in pYES (P175) -> new name: P180
  • OMT+ (PCR19) in pYES (P175) -> new name: P181
  • OMT- (PCR20) in pYES (P175) -> new name: P182
  • PAL+ (PCR32) in pYES (P175) -> new name: P183
  • PAL- (PCR33) in pYES (P175) -> new name: P184
  • adding 5µl ligation product in 100 µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min 180 rpm
  • plate on agar with ampicillin and incubate over night at 37°C

Gel- purification of hybridized oligos: SV40 SS (Tube PCR34)

Investigator: Roman Aim of the experiment: Purification of the hybridized oligos in order to make them ready for ligation in pSB1C3 Operational Sequence:

  • oligos were seperated by gel electrophoresis (LMP agarose)
  • picture:

preparative gel electrophoresis

  • afterwards the DNA was cut out and extracted with the Quiagen Gel- purification kit as described in the manufacturer's protocol. Elution was performed in two steps á 25 µl elution buffer. DNA was collected in one tube, which was annotated with PCR34 purif.
  • determined concentration (NanoDrop): ca. 385 ng/µl

Tuesday, July 24nd

Gelextraction of preparative digested ADH1-P, CYC1-T, TEF2-P, TEF1-P,PGK1-P

Investigator: Georg

  • Plasmid-DNA was extracted according to Quiaquick gel extraction kit

Nanodrop: measuring concentration of P128-P131, P168-P169

Investigator: Georg

  • P128: 28,3 ng/µl
  • P129: 21 ng/µl
  • P130: 4,2 ng/µl
  • P131: 4,7 ng/µl
  • P168: 3,5 ng/µl
  • P169: 4,2 ng/µl

Gelextraction of APT digested with Xbal and AgeI (P189)

Investigator: Daniela

Gelextration

  • QIAquick Gel Extractrion Kit was used
  • the product was named P189
  • concentration: c = 9.1 ng/µl

Ligation of APT (P189) in pSB1C3-RFC25 (P133)

Investigator: Daniela

APT (P189) in pSB1C3-RFC25 (P133)

volume reagent
0.86 µl P133
7.14 µl APT (P189)
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
9 µl ddH2O

Negative control:

volume reagent
0.86 µl P133
16.14 µl ddH2O
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
  • water bath 16 °C

NanoDrop determination of PCR34- PCR38

Investigator:Roman

Aim: Determination of the concentration of the samples previously to the ligation

Determined values:

PCR Product Concentration in ng/µl
PCR34 385 (hybridized oligos)
PCR35 41,2
PCR36 39,5
PCR37 41,9
PCR38 57,4
  • PCR38 will be used in following restriction digest

Restriction digest of p123 and PCR38 with NgoMIV and Pst1

Investigator: Roman Aim of the experiment: To prepare samples of p123 (pSB1C3 RFC25) and PCR38 for a following ligation Operational sequence: p123 was digested in a 40 µl preparation (miniprep product):

Substance Volume
Plasmid- DNA 20 µl
Enzyme NgoMIV 2 µl
Enzyme Pst1 2 µl
Buffer 4 4 µl
ddH2O 12 µl

PCR38 was digested in a 50 µl preparation (PCR product)

Substance Volume
Purified PCR product 25
Enzyme NgoMIV 2 µl
Enzyme Pst1 2 µl
Buffer 4 5 µl
ddH2O 16 µl

The preparations were incubated at 37°C for 3h and then stored at -20°C in box The tubes were annotated with "p123_doubledigest_NgoMIV+Pst1_unpurified_20120724" and "PCR38_doubledigest_NgoMIV+Pst1_unpurified_20120724" Afterwards, the samples were load on a 1% universal agarose gel and separated at 100 V for ca. 45 min. Corresponding gel- bands were cut out and stored at -20°C over night until extraction.

Ligation of p151 and PCR34

Investigator: Roman

Aim: Ligation of fragments previously to a transformation

Operational Sequence: Length of fragments:

  • p151: 2070 bp; c = 9,5 ng/µl
  • PCR34: 67 bp; c = 385 ng/µl

20 µl preparation:

Substance Volume
p151- DNA 11 µl
PCR34- DNA 3 µl (out of a 1/100 dilution)
Ligase 0,5
T4 Ligase Buffer 2 µl
ddH2O 3,5 µl

Negative controls were prepared the same way, using 3 µl of ddH2O instead of PCR34- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath). Afterwards, the samples were stored at 4°C until the transformation.

Ligation of p126 and PCR31

Investigator: Roman

Aim:Ligation of fragments previously to a transformation

Operational Sequence: Length of fragments:

  • p126: 7961 bp; c = 46 ng/µl
  • PCR34: 306 bp; c = 11,3 ng/µl

10 µl preparation:

Substance Volume
p126- DNA 2 µl
PCR31- DNA 1 µl
Ligase 0,5
T4 Ligase Buffer 1 µl
ddH2O 5,5 µl

Negative controls were prepared the same way, using 1 µl of ddH2O instead of PCR31- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath).

Ligation of p175 with "PCR1, 19.7.2012" and p144

Investigator: Roman

Aim: Ligation of fragments previously to a transformation

Operational Sequence: Length of fragments:

  • p175: 5900 bp; c = 107,3 ng/µl
  • PCR1: 1680 bp; c = 18 ng/µl
  • p144: ??? bp; c = ???

10 µl preparation:

Substance Volume
p175- DNA 1 µl
PCR1/ p144- DNA 3 µl
Ligase 0,5
T4 Ligase Buffer 1 µl
ddH2O 4,5 µl

Note: This preparation was not made optimal, due to use of a wrong fragment lengths (PCR1 and p144, respectively) during the calculation of the volumes. Negative controls were prepared the same way, using 3 µl of ddH2O instead of PCR fragment. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath).

Preparation of yeast SCU Minimal Medium for Plates

Investigator: Katrin, Daniela

  • The recipe was taken from the pYES2 manual.
  • The ingredients were dissolved in 900 ml dest. water (ELGA) corresponding to the recipe. Lysine was only available as lysine-dihydrochloride, therefore 0.149 g instead of 0.1 g were used. Uracil was omited.
  • The medium was divided in 2 x 450 ml. One will later be used as the induction medium through the addition of galactose the other one will be used as the non-induction medium (addition of glucose). Sugar solutions will be added after autoclaving to prevent maillard-reaction.
  • 10 g agar and a magnetic stir bar were added to each preparation
  • Autoclaving.
  • Glucose solution: 10 g glucose were dissolved in 50 ml ELGA.
  • Galactose solution: 10 g galactose were dissolved in 50 ml ELGA.
  • No raffinose will be used.
  • Autoclaving

Transformation of APT in pSB1C3-RFC25 (P190)

Investigator: Daniela

  • APT (P189) in pSB1C3 (P133) -> new name: P190
  • Negative control P133
  • adding 5µl ligation product in 100 µl competent XL blue E.coli cells
  • incubation 30 min on ice
  • 5 min at 37°C
  • adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 45 min 180 rpm
  • plate on agar with chloramphenicol and incubate over night at 37°C

Picking Clones of 4CL, CHS, OMT and PAL in pTUM104 and APT in original plasmid

investigator: Daniela

Aim of the experiment: preculture over night for the miniprep next day

Wednesday, July 25th

Restriction digest of p123 with Xba1 and Age1

Investigator: Roman

Aim of the experiment: Aim of the experiment is the preparation of the vector pSB1C3 RFC25 (p123) for a ligation with the PCR fragment PCR34 (as repetition for the ligation of p151 with PCR34, which has probably not worked, due to low vector concentration.

Operational sequence: 30 µl preparation for restriction digest of p123

Substance Volume
p123- DNA 10 µl (results in ca. 5µg DNA)
Xba1- RE 1 µl
Age1- RE 1 µl
NEBuffer 4 3 µl
ddH2O 15 µl

The preparation was incubated at 37°C for 3,5 h. Afterwards the fragments were purificated by means of a preparative gel electrophoresis (see below).

Restriction digest of p123 with Age1 and Pst1

Investigator: Roman

Aim of the experiment: Aim of the experiment is the preparation of the pSB1C3- Vector (p123) for a ligation with PCR38 (which has been digested with NgoMIV and Pst1).

Operational sequence: 30 µl preparation for restriction digest of p123

Substance Volume
p123- DNA 10 µl (results in ca. 5µg DNA)
Pst1- RE 1 µl
Age1- RE 1 µl
NEBuffer 4 3 µl
ddH2O 15 µl

The preparation was incubated at 37°C for 3,5 h. Afterwards the fragments were purificated by means of a preparative gel electrophoresis (see below).

Gel extraction of PCR38 and p123 (both digested with NgoMIV and Pst1)

Investigator: Roman

Aim of the experiment: The separated PCR38 and p123 (pSB1C3 RFC25) DNA- fragments from yesterday's restriction digest (both NgoMIV and Pst1) are to be extracted from agarose- gel (which has been stored at -20°C over night), to make them ready for further usage.

Operational sequence: The extraction was performed as described in the manual of the Quiagen Gel- extraction kit. Elution was performed with 30 µl of elution- buffer EB in two steps (à 15 µl), temperated at 50°C. Concentration was determined with NanoDrop:

  • PCR38: 17,3 ng/µl
  • p123: 37,2 ng/µl

Tubes were annotated with p191 (p123 NgoMIV/Pst1) and p192 (PCR38 NgoMIV/Pst1).

Gel purification of p123 (Xba1/Age1 double digest) and p123 (Age1/Pst1 double digest)

Investigator: Roman

Aim of the experiment: Aim of the experiment is the purification of two different double digested p123 samples, to make them ready for ligation with the inserts PCR38 and PCR34, respectively.

Operational sequence: The samples were loaded on a 1% universal agarose gel and separated at 100 V for about 45 min. Afterwards, the corresponding gel- bands were cut out and weight. Extraction from gel was performed as described in the manufacturers protocoll (Quiagen gel extraction kit). Changes: Elution was performed in one step with 30µl ddH2O (autoclaved) temperated at 50°C. Concentrations were determined with NanoDrop:

  • p123 (Xba1/Age1): 70,8 ng/µl
  • p123 (Pst1/Age1): 59,1 ng/µl

The tubes were annotated with p206 (p123 Age1/Pst1) and p207 (p123 Age1/Xba1).

Ligation of p123 (Age1/Pst1) and PCR38

Investigator: Roman

Aim of the experiment: Ligation of the fragments p123 and PCR38

Operational sequence: Length of fragments:

  • p123: 2070 bp; c = 59,1 ng/µl
  • PCR38: 617 bp; c = 17,3 ng/µl

20 µl preparation:

Substance Volume
p123- DNA 3 µl (ca. 180 ng vector- dna)
PCR38- DNA 10 µl
Ligase 0,5
T4 Ligase Buffer 2 µl
ddH2O 4,5 µl

Negative controls were prepared the same way, using 10 µl of ddH2O instead of PCR38- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath). Afterwards, the samples were stored at 4°C in the fridge until transformation.

Ligation of p123 (Age1/Xba1) and PCR34

Investigator: Roman

Aim of the experiment: Ligation of fragments p123 and PCR34 Operational sequence: Length of fragments:

  • p123: 2070 bp; c = 70,8 ng/µl
  • PCR34: 67 bp; c = 3,85 ng/µl (1:100 dilution of original sample)

20 µl preparation:

Substance Volume
p123- DNA 3 µl (ca. 210 ng vector- dna)
PCR34- DNA 6 µl (out of 1:100 dilution)
Ligase 0,5
T4 Ligase Buffer 2 µl
ddH2O 8,5 µl

Negative controls were prepared the same way, using 6 µl of ddH2O instead of PCR34- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath). Afterwards, the samples were stored at 4°C in the fridge until transformation.

Miniprep of 4CL, CHS, OMT, PAL in pTUM104 and APT in original plasmid from GeneArt

Investigator: Katrin

Aim of the experiment: extraction of plasmids (pTUM104) that contain 4CL, CHS, OMT, PAL; extraction of original plasmid from GeneArt with APT

QIAprepS Spin Miniprep Kit

  • step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

the Minipreps were named as follows:

  • P193: 4CHL+ in pSB1C3-RFC25 (c = 110,7 ng/µl)
  • P194: 4CL- in pYEs (c = 342,8 ng/µl)
  • P195: CHS+ in pYEs (c = 423,6 ng/µl)
  • P196: CHS- in pYEs (c = 92,1 ng/µl)
  • P197: OMT+ in pYEs (c = 394,6 ng/µl)
  • P198: OMT- in pYEs (c = 183,0 ng/µl)
  • P199: PAL+ in pYEs (c = 138,4 ng/µl)
  • P200: PAL- in pYEs (c = 464,5 ng/µl)
  • P201: APT in original plasmid (c = 260,0 ng/µl)

Transformation of Ligation-products into E.coli XL-1 Blue

Investigator: Andrea

  • for each Biobrick 100 µl cells were used and pooled together with 5 µl of ligation product from the 24th of july

(3 hours at 16°C and over night at 4 °C) and from the 19th of july (5 days at 16°C)

  • Incubation on ice for 30 min
  • 5 min heat shock at 37 °C
  • cells were prefilled with 1 ml of LB-medium and incubated in a cell-culture shaker at 37 °C for 40 min
  • 100 µl of these cell suspension were plated on antibiotic selection plates (ligations in pTUM104: Ampicillin; ligations in pSB1C3: Chloramphenicol)
  • cell suspension was centrifuged at 13000 rpm for 90 s for resuspending the pellet with 100 µl LB and plating also
  • incubation at 37 °C overnight

Thursday, July 26th

Transformation of ligation products of P126+PCR31, P151+PCR34, P123+PCR38 and P123+PCR34 in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment:Transformation of ligation products of P126+PCR31 (AmpR), P151+PCR34 (CamR), P123+PCR38 (CamR) and P123+PCR34 (CamR) in E. coli XL1-Blue

Operational sequence:

  • Performed after lab's standard protocol.

Miniprep of APT in pSB1C3-RFC25 and control digestion with Xba1 and Pst1

Investigator: Mary

Aim of the experiment: extraction of plasmid (pSB1C3-RFC25) that contains APT and testing if ligation was succesful; three clones were picked the day before

Miniprep

QIAprepS Spin Miniprep Kit

  • step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

the Minipreps were named as follows:

  • APT in pSB1C3-RFC25 clone 1: c=96 ng/µl
  • APT in pSB1C3-RFC25 clone 2: c=108 ng/µl
  • APT in pSB1C3-RFC25 clone 3: c=97 ng/µl

Control digest

volume reagent
2.5 µl 4CL+/-, PAL+/-, CHS+/-, OMT+/-, APT+/-
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
13 µl ddH2O

expected bands:

  • pSB1C3-RF25: 2070bp
  • APT: 1244bp

TUM12 120726 APT in pSB1C3.jpg

Control digest of 4CL, PAL, CHS, OMT, APT in pTUM104

Investigator: Mary

Aim of the experiment: Test whether the ligation of 4CL, PAL, CHS, OMT, APT in pTUM104 was successful

Plasmids are taken from miniprep from 25.07.2012

volume reagent
2.5 µl 4CL+/-, PAL+/-, CHS+/-, OMT+/-, APT+/-
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
13 µl ddH2O

expected bands:

  • pYES: about 5800bp
  • 4CL: 1685bp
  • PAL: 2151bp
  • CHS: 1173bp
  • OMT: 1222bp
  • APT: 1244bp

TUM12 120726 pYDS controldigest.jpg

Pour on yeast agarplates for selection of yeast cells

Investigator: Mary

Aim of the experiment: prepare selection-agarplates without Uracil (Some plates including glucose, some including galactose)

it was strange that the agar was still pretty liquid after waiting for one hour.

see pYES-manual

Picking of clones of transformation from 25.07.

Investigator: Lara

Aim: Amplification of clones for extraction of plasmids and subsequent proof of functional ligation.

6 clones were picked for each ligation (PCR1 in pYESnew, PCR2 (p144) in pYESnew and PCR in pSB1C3. Clones containing pYESnew were put into 4 ml LB with 4 µl of ampillicin stock solution, clones containing pSB1C3 were put into chloramphenicol-containing media. Incubation at 37 °C over night.

Transformation of plasmids P40&P42 into E.coli XL1 blue

Investigator: Lara

Aim:

Transformation of plasmids P40 and P42 into E.coli XL1 blue to get plasmids of higher quality. P40&P42 are directly extracted from the expression strain BL21(DE). The quality of the plasmids might not be sufficient for Quickchange site-directed mutagenesis. Therefore transformation into E.coli XL1 blue and subsequent plasmid preparation to get plasmids with sufficient quality for SDM.

Procedure:

100 μl of competent XL1 blue cells were thawed on ice. 1 µl plasmid DNA (P40 or P42) was added. Incubation for 30 min on ice. 5 min heatshock at 37°C. 1 ml of LB medium without antibiotic was added, incubation for 45 min at 180 rpm/37°C. After incubation, 100 µl of the cell suspension were plated on antibiotic containing plates (P40: Kan, P42: Amp). The remaining solution was centrifuged for 60 sec, resuspended in 100 µl LB and plated, as well. Incubation at 37 °C over night.

Friday, July 27th

Picking from the overnight transformation of ligated P126+PCR31, P151+PCR34, P123+PCR38 and P123+PCR34 in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment Picking of transformated E. coliXL1-Blue with ligation product of P126+PCR31 (AmpR), P151+PCR34 (CamR), P123+PCR38 (CamR) and P123+PCR34 (CamR).

Procedure

  • Colonies were picked with pipette tips and transformed into a new cell-culture tube with 4 ml of LB-medium and antibiotics and were put overnight in a 180 rpm cell culture shaker at 37 °C. P126+PCR31 (AmpR), P151+PCR34 (CamR), P123+PCR38 (CamR) and P123+PCR34 (CamR)

Transferring E. coli XL1-Blue colonies, transformed with BBa_I15008 (heme oxygenase) and BBa_K105005 (LexA), from old antibiotic plates on new plates

Investigator: Jeff

Aim of the experiment With a sterile incolation loop the colonies were transferred on a new antibiotic plate, because the plates are already 4 weeks old.

Procedure

  • Incolation loop was put for few second into the flame of a Bunsen burner
  • Colonies from plate with BBa_I15008 (heme oxygenase, KanR) and BBa_K105005 (LexA, AmpR) were transferred on a new antibiotic plate
  • Overnight-culture at 37 °C

Miniprep and control digest of PAL in pYES picked on thursday 26th July

Investigator: Ingmar

Aim of the experiment: Test whether the ligation of PAL in pTUM104 was successful

Miniprep Using a Quiagen Miniprep kit a plasmid isolation of two picked clones of the PAL+ in pYes2 RFC25 ligation was done. The miniprep product of the first clone was named P219, the one of the second clone P220. Both were used for the following control digest.

control digest

volume reagent
2.5 µl PAL+
0.25 µl Xbal (20U/µl)
0.25 µl PstI (20U/µl)
2 µl NEB4 (10x)
2 µl BSA (10x)
13 µl ddH2O

expected bands:

  • pYES:5819bp
  • PAL: 2151bp

500px

As the picture only shows one band at the expected length of the vecotr backbone the ligation was not successfull and will be repeated with a reduced quotient of insert to vector of 3.

Ligation of PAL+ (PCR32) and APT (P189) with pYes2 RFC25 (P175)

Investigator: Ingmar

Aim of the experiment: Insert the genes of PAL and APT in pYEs2 RFC 25 in order to test their expression in yeast.

Ligation

PCR product Volume Vector Volume Volume T4 DNA Ligase Volume T4 DNA Ligase buffer Volume ddH20 New Plasimd Number
PAL+ (PCR32) 6.6 P 175 1.4 1 µl 2 µl 9 µl P 221
APT (P 189) 7.06 P 175 0.94 1 µl 2 µl 9 µl P 222
control: ddH2O 7 P 175 1 1 µl 2 µl 9 µl

The Ligation product of PAL+ and pYes was labeled P233, the one of APT and pYes P234.

Plasmid extraction of plasmids PCR1/pTUM104, P144/pTUM104, PCR1/pSB1C3

Investigator: Lara

Aim of the experiment: Extract plasmids from ligation of PCR1 in pYES, P144 in pTUM104 and PCR1 in pSB1C3 for further analytical restriction digest. (6 clones were picked for each ligation and plasmids subsequently extracted.)

Prodedure: Plasmids were extraced by using Qiagen plasmid miniprep kit.

Following concentrations were obtained:

1_1 - 1_6

  • PCR1 in pYESnew clone 1: c=66 ng/µl
  • PCR1 in pYESnew clone 2: c=182 ng/µl
  • PCR1 in pYESnew clone 3: c=98 ng/µl
  • PCR1 in pYESnew clone 4: c=326 ng/µl
  • PCR1 in pYESnew clone 5: c=87 ng/µl
  • PCR1 in pYESnew clone 6: c=156 ng/µl

2_1 - 2_6

  • P144(PCR2) in pYESnew clone 1: c=195 ng/µl
  • P144(PCR2) in pYESnew clone 2: c=202 ng/µl
  • P144(PCR2) in pYESnew clone 3: c=198 ng/µl
  • P144(PCR2) in pYESnew clone 4: c=77 ng/µl
  • P144(PCR2) in pYESnew clone 5: c=95 ng/µl
  • P144(PCR2) in pYESnew clone 6: c=200 ng/µl

3_1 -3_6

  • PCR1 in pSB1C3-RFC25 clone 1: c=116 ng/µl
  • PCR1 in pSB1C3-RFC25 clone 2: c=110 ng/µl
  • PCR1 in pSB1C3-RFC25 clone 3: c=116 ng/µl
  • PCR1 in pSB1C3-RFC25 clone 4: c=112 ng/µl
  • PCR1 in pSB1C3-RFC25 clone 5: c=139 ng/µl
  • PCR1 in pSB1C3-RFC25 clone 6: c=80 ng/µl

Restriction digest of plasmids from 6 clones each of PCR1/pTUM104new, P144(PCR2)/pTUM104new, PCR1/pSB1C3

Investigator: Lara

Aim of the experiment: Analytical restriction digest of plasmids to check for insert.

volume reagent
3 µl DNA
2 µl Buffer 4
0,25 µl Xba1
0,25 µl Spe1-HF
0,2 µl BSA(100x)
14,3 µl ddH2O

Incubation: 37 °C; 1,5 h

A mastermix for 19 samples was made.

Analytical gel electrophoresis of PCR1/pTUM104new, P144(PCR2)/pTUM104new, PCR1/pSB1C3

Investigator: Lara

Aim of the experiment: Analytical gel electrophoresis of products from restriction digest.

TUM12 LS analytgel2707 1.png

TUM12 LS analytgel2707 2.png

Small-Scale Yeast Transformation of 4CL, CHS, OMT and PAL- in pTUM104

Investigator: Daniela

Aim of the experiment:Transformation of P193 - P198 and P200 in Yeast

The protocol on page 13 of the pYES2 manual was used.

Only modifications are noted:

step 1: inoculate in 4 ml YPD medium

step 2: OD600 = 10 -> to determine a OD600 of 0.4 in 50 ml, 2.5 ml yeast suspension and 47.5 ml YPD medium were used (1:20 dilution)

steps 3 and 4: centrifugation for 5 min, 4 °C

step 5: room temperature was about 35 °C

step 6:

1 µg plasmid DNA

  • P193: c = 110.7 ng/µl -> 9 µl
  • P194: c = 342.8 ng/µl -> 3 µl
  • P195: c = 423.6 ng/µl -> 2.4 µl
  • P196: c = 92.1 ng/µl -> 11 µl
  • P197: c = 394.6 ng/µl -> 2.5 µl
  • P198: c = 183.4 ng/µl -> 5.5 µl
  • P200: c = 464.5 ng/µl -> 2.2 µl

100 µg denatured sheared salmon sperm: the one from Simon was used -> 10 µl

step 8: incubation was carried out at 35 °C because the thermoblock did not achieve a lower temperature

The SCU- plates are incubated at 30°C over the weekend.

Colonies were grown on 2 plates (31.07.2012): CHS+ : 1 colony OMT+ : 3 colonies

-> repetition of transformation on plates with glucose!

Saturday, July 28th

Miniprep of picked E. coli XL1-Blue transformated with ligation products of P126+PCR31, P151+PCR34, P123+PCR38 and P123+PCR34

Sunday, July 29th

Picking of clones from PAL+ for a overnight culture

Investigator: Ingmar

Aim of the experiment:Inoculation of LB medium with clones picked from the transfomation of P183 (PAL+ (PCR32) in pYES (P175)) done on Monday, 23rd July in order to test on monday wheather the Ligation was successfull. Operationale sequence:

  • Two clones were picked an transferred to 6 ml LB medium containing 1:1000 Ampicillin.
  • Incubation overnight at 37°C, 180 rpm.

Week 8

Monday, July 30th

Extraction of Yeast genomic DNA for amplify TEF2-P, TEF1-T,ADH1-T

Investigator: Georg

Aim of Experiment: To get genomic DNA of yeast for amplify TEF2-P, TEF1-T,ADH1-T by PCR

  • 100 µl of overnight culture of S. cerevisiae is centrifuged 5 min (13400 rpm)
  • Remove supernatant and resuspend pellet in 100 µl 200 mM LiAC 1% SDS
  • Incubate for 5 min at 70 C
  • Precipitate DNA by adding 300µl 96% Ethanol and vortexing
  • Sedimentation for 3 min (13400 rpm)
  • Removal of supernatant and washing with 500 µl 70& EtOH + centrifuge
  • remove supernatant and solubilisate pellet in 100 ml 1x TE-buffer
  • Remove cell-parts by 1 min of centrifugation and move supernatant in new Eppi
  • Add 50 ml 7 M NH4AC-solution, let incubate at room-temperature for 5 min
  • Centrifuge for 10 min
  • Move supernatant to a new eppi
  • ADD 70 µl 7,5 M NH4OAc and 280 µl Isopropanol
  • Incubate 10 min at room-temperature and centrifuge 10 min
  • remove supernatant
  • wash pellet with 100µl 80% Ethanol, centrifuge for 10 min
  • remove supernatant
  • dry pelleted DNA, and resolubilsate in 1x TE-buffer

( Extraction had to be done twice)

Nanodrop of yeast genomic DNA to measuring the concentration

Investigator: Georg

  • S.C1: 51,2 ng/µl
  • S.C2: 24,6 ng/µl
  • S.C3: 41,3 ng/µl
  • S.C4: 45,9 ng/µl

Analytical digestion and gelelectrophoresis of the plasmids P221-P232

Investigator: Saskia

Aim of the experiment: Analytical digest of P221-P223 with NdeI and BamHI and of P224-P232 with XbaI and AgeI-HF and analytical gelelectrophoresis .

Procedure:

  • Analytical restriction digest and gelelectrophoresis of P221-P223 with NdeI and BamHI
  • Reaction batch for each plasmid:
Reagent Volume in µl
Tango Buffer 10x 4 µl
BamHI (NEB) 0.5 µl
NdeI (NEB) 0.5 µl
Plasmid DNA 2.5 µl
ddH2O 12.5 µl
TOTAL 20 µl
  • Incubation at 37 °C for 1 h 20 min.
  • Analytical gelelectrophoresis (1%) at 90 V for 40-45 min.
  • Analytical restriction digest and gelelectrophoresis of P224-P232 with XbaI and AgeI-HF
  • Reaction batch for each plasmid:
Reagent Volume in µl
NEBuffer4 10x 2 µl
BSA 100x 0.2 µl
XbaI (Fermentas) 0.25 µl
AgeI-HF (Fermentas) 0.25 µl
Plasmid DNA 2.5 µl
ddH2O 14.8 µl
TOTAL 20 µl
  • Incubation at 37 °C for 1 h 20 min.
  • Analytical gelelectrophoresis (1%) at 90 V for 40-45 min.
  • Order of gel-pockets:
1 kbp ladder P221 P222 P223 100 bp ladder
Corrupt Corrupt Corrupt

TUM12 20120730 gel1 P221-P223.jpg

  • Order of gel-pockets:
1 kbp ladder P224 P225 P226 P227 P228 P229 P230 P231 P232 100 bp ladder
Corrupt Corrupt Corrupt Corrupt Corrupt Corrupt ?Questionable? ?Questionable? ?Questionable?

TUM12 20120730 Gel2 P224-P232.jpg

Transformation of ligation products of PAL+ (PCR32) and APT(P189) in pTUM104 RFC25 (P175)into E.coli Xl1-Blue

Investigator: Ingmar

Aim of the experiment:Transformation of the ligation products of PAL+ (PCR32), APT (P189) and the negative control in pTUM104 in XL1 Blue. Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 5 µl of the ligation products
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Miniprep and control digest of PAL+ in pTUM104 picked on sunday 29th July

Investigator: Ingmar

Aim of the experiment: Test whether the ligation of PAL in pTUM104 was successful

Miniprep

Using a Quiagen Miniprep kit a plasmid isolation of two picked clones of the PAL+ in pTUM104 RFC25 ligation was done. The miniprep product of the first clone was named P235, the one of the second clone P236. Both were used for the following control digest.

control digest

volume reagent
2.5 µl PAL+
0.25 µl Xbal (10U/µl)
0.25 µl PstI (10U/µl)
2 µl Tango (10x)
15 µl ddH2O

expected bands:

  • pYES:5795bp
  • PAL: 2201bp

TUM12 PAL+ (P235+P236) analytical digest 30.07.2012.jpg

The picture shows in both cases the two expected bands at 5795 bp an 2201 bp. Therefore the ligation was successfull.

Miniprep of Schwab plasmids P40 & P42 from E.coli XL1 blue

Investigator: Lara

Aim of experiment: Get plasmids carrying lavendula limonene synthase gene for subsequent site-directed mutagenesis.

Plasmid concentrations:

  • P40 clone 1: 155 ng/µl
  • P40 clone 2: 114 ng/µl
  • P42 clone 1: 40 ng/µl
  • P42 clone 2: 32 ng/µl

Analytical restriction digest of extracted Schwab plasmids carrying Lavendula LS

Investigator: Lara

Aim of experiment: Check whether insert is OK.

  • Digest of P40 clone 1 and clone 2
volume reagent
2.5 µl plasmid DNA
0.25 µl NcoI
0.25 µl HindIII
2 µl Buffer Tango (10x)
15 µl ddH2O
  • Digest of P42 clone 1 and clone 2
volume reagent
4.5 µl plasmid DNA
0.25 µl EcoRI
0.25 µl NotI
2 µl Buffer Orange (10x)
13 µl ddH2O

Incubation for 1,5 h at 37°C.

TUM12 LS analytgel2 3007.png

Clones renamed:

  • P40 clone 1: now P241
  • P40 clone 2: now P242
  • P42 clone 1: now P243
  • P42 clone 2: now P244

Analytical restriction digest of plasmids containing citrus LS (repetition of digest from July, 27th)

Investigator: Lara

Aim of experiment: Check whether ligations PCR1/pTUM104new, P144(PCR2)/pTUM104new and PCR1/pSB1C3 have worked. This time, a standard protocol with 2,5 µl of DNA was used. Furthermore, Pst-1 HF was used instead of Spe1 (as on Friday, July 27th).

  • Digest of plasmids PCR1/pTUM104new clone 1,3,5 and 6; P144(PCR2)/pTUM104 new clone 1,3,5 and 6; PCR1/pSB1C3 clone 1,5 and 6.
volume reagent
2.5 µl plasmid DNA
0.25 µl Pst1-HF
0.25 µl Xba1
2 µl NEB Buffer 4 (10x)
2 µl BSA (10x)
13 µl ddH2O

Incubation for 1,5 h at 37 °C.

TUM12 LS analytgel3007.png

Tuesday, July 31st

Nanodrop for measuring Plasmidconcentrations of P54,P55,P57,P87,P86,P88,P90,P91,P89

Investigator: Georg

  • P54: 235 ng/µl
  • P55: 645 ng/µl
  • P57: 491,1 ng/µl
  • P87: 259 ng/µl
  • P86: 99 ng/µl
  • P88: 86 ng/µl
  • P90: 1161 ng/µl
  • P91: 261 ng/µl
  • P89: 630 ng/µl

Prep. digestion of P90, P87, P55 and prep. gelelectrophoresis

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
3 µl PstI-HF (NEB)
3 µl XbaI (NEB)
12 µl NEB-4 buffer
1,2 µl 100 x BSA (NEB)
40,8 µl dd H20
=60µl TOTAL
  • To 20 µl digestive mastermix 20 µl of DNA was added and mixed
  • Digestion was processed for 3 hours at 37 C

31.07.2012 präp.png

Analytical digestion of pTUM104 with PvuII and SwaI

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
0,25 µl SWAI (NEB)
0,25 µl PvuII (NEB)
2 µl NEB-3 buffer
0,2 µl 100 x BSA (NEB)
14,85 µl dd H20
= 17,5µl TOTAL
  • After 1 h digestion with SwaI at room temperature, PvuII was added and digested at 37 C, 1 h

31.07.2012 Testverdau pYes2 mit SwaI + PvuII.png

Picking from the overnight transformation of ligated P123+PCR38 in E. coli XL1-Blue from July, 27th

Investigator: Jeff, Georg

Aim of the experiment: Repeat picking from the overnight transformation of ligated P123+PCR38 in E. coli XL1-Blue because the last 3 picked colonies are negative.

Procedure:

  • Colonies were picked with pipette tips and transformed into a new cell-culture tube with 4 ml of LB-medium and antibiotics and were put overnight in a 180 rpm cell culture shaker at 37 °C. P123+PCR38 (CamR).

Quickchange of Schwab plasmid P40 clone 1

Investigator: Lara

Aim of experiment: Remove Age1 restriction site in gene coding for lavendula limonene synthase.

PCR

volume reagent
2.5 µl 10x Pfu Ultra II buffer
2 µl Plasmid P241
1 µl 1:10 dilution of O60 (10 pmol/µL)
1 µl 1:10 dilution of O61 (10 pmol/µL)
18 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 12 95°C 30 sec
55°C 1 min
68°C 7 min
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the SDM PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Kan-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Kan-LB-plate

Preparative digest of PCR1, PCR2 with XbaI and AgeI (additional positive control P155)

Investigator: Andrea

Digestion of PCR1, PCR2 and P155 (pTUM104) with XbaI and AgeI

volume reagent
8 µl PCR1
4 µl NEB Buffer
0.4 µl BSA
1 µl XbaI (20 U/µl)
1 µl AgeI (20 U/µl)
25,6 µl ddH2O
volume reagent
10 µl PCR2
4 µl NEB Buffer
0.4 µl BSA
1 µl XbaI (20 U/µl)
1 µl AgeI (20 U/µl)
23,6 µl ddH2O
volume reagent
10 µl P155
4 µl NEB Buffer
0.4 µl BSA
1 µl XbaI (20 U/µl)
1 µl AgeI (20 U/µl)
23,6 µl ddH2O

Mastermix of Buffer, BSA and Enzymes was added to the DNA and water.

Incubation: 37 °C, 3 h

Preparative gel electrophoresis of PCR1/PCR2, P155

Investigator: Andrea

  • PCR1 / PCR2: ca. 1600 bp
  • P155: ca. 5800 bp

31.07.12 prepgel.png

Ligation of digested PCR1 with P133 (pSB1C3) and P175 (pTUM104) (XbaI and AgeI)

Investigator: Andrea

Concentration (Nano Drop:
LIMS Citrus (PCR 1) = ? ng/µl
LIMS Citrus (PCR 2) = ? ng/µl
P175 = 107,3 ng/µl
P133 = 41.8 ng/µl


PCR1 and P175

volume reagent
1 µl P175
14,27 µl PCR 1
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
1,73 µl ddH2O


PCR1 and P133

volume reagent
2,4 µl P133
14,27 µl PCR 1
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
0,33 µl ddH2O


PCR2 and P175

volume reagent
1 µl P175
11,99 µl PCR 2
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
4,01 µl ddH2O


PCR2 and P133

volume reagent
2,4 µl P133
11,99 µl PCR 2
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
2,61 µl ddH2O


Negativ control P175

volume reagent
1 µl P175
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
16 µl ddH2O


Negativ control P133

volume reagent
2,4 µl P175
1 µl T4 DNA Ligase
2 µl T4-ligase buffer (10x)
14,4 µl ddH2O
  • water bath 16 °C over night

Media and plates for yeast transformation

Investigator: Martin, Alois

Aim of the experiment: Producing media and plates for yeast transformation (according to pYes_manual_kommentiert)

  • YPD-Medium, YPD-plates, 10X TE, 10X LiAc, 1x LiAc/0.5x TE

Wednesday, August 1st

Miniprep of picked E. coli XL1-Blue transformated with ligation products of P123+PCR38

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of picked E. coli XL1-Blue transformated with ligation products of P123+PCR38.

Procedure:

  • Miniprep was performed after manufacturer's protocol. (P251-P260)

Analytical digestion and gelelectrophoresis of Miniprep E. coli XL1-Blue transformated with ligation products of P123+PCR38 and of pGBKT7 plasmid

Investigator: Dennis, Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of Miniprep E. coli XL1-Blue transformated with ligation products of P123+PCR38 to see whether the ligation was successful and of pGBKT7 plasmid to see if the MfeI and BamHI restriction enzymes work.

Procedure:

  • Mastermix for digestion with XbaI+AgeI-Hf of ligation products of P123+P38:
Reagent Volume in µl
Buffer 4 (10x) 22 µl
BSA (100x) (NEB) 2.2 µl
XbaI (NEB) 1.75 µl
AgeI-Hf (NEB) 1.75 µl
ddH2O 162.8 µl
TOTAL MASTERMIX 192.5 µl
  • 17.5 µl of Mastermix + 2.5 µl of the plasmid DNA (P251-P260)
  • Composition for analytical restriction digestion of P99 with MfeI+BamHI
Reagent Volume in µl
Buffer G (10x) 2 µl
MfeI (NEB) 0.25 µl
BamHI (NEB) 0.25 µl
Plasmid DNA (P99; pGBKT7) 2.5 µl
ddH2O 15 µl
TOTAL 20 µl
  • Analytic Gelelectrophoresis for 1 h at 90 V.
  • Order of gel-pockets:
1 kbp ladder P251 P252 P253 P254 P255 P256 P257 P258 P259 P260 100 bp ladder
100 ladder Corrupt Corrupt Corrupt Corrupt Corrupt Corrupt Corrupt Corrupt Corrupt Corrupt 1 kb ladder

TUM12 20120801 20aaLexA.jpg

  • Order of gel-pockets:
100 bp ladder P99 control digestion with MfeI+BamHI P99 control undigested P123 control undigested 100 bp ladder (accidently)
Okay Okay Okay

TUM12 20120801 p99 verd p99 unverd. p123 unverd edit.jpg

→MfeI and BamHI are working! (Expected DNA strands for P99 digestion at 731 bp, 2443 bp and 4129 bp; that's what we got.)

Preperative digestion and gelelectrophoresis of PCR37 with XbaI+AgeI-HF

Investigator: Jeff

Aim of the experiment:

Procedure:

volume reagent
25 µl PCR37
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
17.5 µl ddH2O
=50 µl TOTAL

Gel extraction of preperative gelelectrohphoresis of PCR37

Investigator: Jeff

Aim of the experiment:

Ligation of PCR39+P207 for cloning LexA with new RFC25 pre- and suffix into a plasmid

Investigator: Jeff

Aim of the experiment:

Procedure

Substance Volume
P207 (digested plasmid DNA (P123) with XbaI and AgeI-HF) 1.42 µl (~100 ng vector dna)
PCR39 (digested insert DNA (PCR37) with XbaI and AgeI-HF) 10.17 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 5.91 µl
TOTAL =20 µl

PCR of P80 to introduce RFC25 pre- and suffix to Pif3

Investigator: Jeff

Aim of the experiment:

Procedure:

  • PCR reaction mixture
volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer O31 1:10 dilution (TUM12-LSPS-fw)
1 µl 10 µM Reverse Primer O32 1:10 dilution (TUM12-LSPS-rv )
0.25 µL OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl Plasmid DNA P80
35.75 µL ELGA Water
=50 µL TOTAL
  • The PCR program was performed after following scheme with following conditions
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
55 °C 60 s
68 °C 30 s
Final extension 68 °C 5 min
Hold 4 °C infinite

PCR purification of PCR of P80

Investigator: Jeff

Aim of the experiment:

Preparative digestion of pTUM104 with SwaI and PvuII

  • Preparative digestion of pYesII
Reagent Volume in µl
SwaI 2 µl
PvuII 2 µl
Neb3 buffer 4 µl
BSA 0,4 µl
H20 31,6 µl
Volume 40 µl

Geldigestion was performed with SwaI and BSA at room temperature for 2,5 hours. Afterwards PvuII was added and digested another 2,5 hours at 37 C

20120801 Präp. Verdau pYes2.png

Preparative Gel of pTUM104 digestion

Investigator: Georg

  • Preparative Digestion was loaded onto a 1% preparative agarose gel
  • Gel was run for 150 min at 70 V

Nanodrop measurement of P245-P250

Gelextraction was performed according to gelextraction protocol

Probe: Concentration: P245 4,5 ng/µl P246 7,5 ng/µl P247 22,7 ng/µl P248 21,1 ng/µl P249 3,3 ng/µl P250 3,8 ng/µl

Transformation of ligation products and quickchange products

Investigator: Lara

Aim: Transformation of ligation products (ligation July 31st) and quickchange products (repetition, quickchange of July 31st).

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the SDM PCR product or 5 µl of ligation product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Kan-LB-plate (Quickchange product), Amp-plate (pYES) or Chloramphenicol (pSB1C3)
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an antibiotic containing LB-plate

Miniprep and control digest of APT in pTUM104

Investigator: Katrin

Aim of the experiment: Test whether the ligation of APT in pYES was successful

Miniprep

Using a Quiagen Miniprep kit, a plasmid isolation of three picked clones of a APT in pYes2 RFC25 ligation was done. The miniprep products were named P261 (1st clone), P262 (2nd clone) and P263 (3rd clone).All three of them were used for the following control digest.

The resulting plamid-concentrations (measured with nanodrop) were clone 1 (P261): 149,0 ng/µl clone 2 (P262): 153,5 ng/µl clone 3 (P263): 158,4 ng/µl

control digest

volume reagent
2.5 µl APT (clones 1,2,3)
0.25 µl Xbal (10U/µl)
0.25 µl AgeI (10U/µl)
2 µl NEB 4 (10x)
2 µl BSA (10x)
13 µl ddH2O

expected bands (pYes has 2 AgeI restriction site):

  • pYES fragment 1:5398 bp
  • pYes fragment 2: 451
  • APT: 1244 bp

IM000269 APT pyes kontrolle.jpg The picture shows the expected bands for clones 1 and 3

Media and plates for yeast transformation

Investigator: Martin, Alois

Aim of the experiment: Producing media and plates for yeast transformation (according to pYes_manual_kommentiert)

  • 20% glucose, 20x SC stock (without uracil and without yeast nitrogen base), SC plates with glucose

Thursday, August 2nd

Transformation of ligation product P207/PCR39

Investigator: Lara

Aim: Transformation of ligation products P207/PCR39 and P207/NK.

Transformation into E.coli Xl1-Blue

Unfortunately the lab assistents went home so that the incubation times had to be shortened.

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 5 µl of the ligation products
  • incubation on ice for 25 min
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 25 min
  • plating of 100 µl on an Chlp-LB-plate
  • sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Chlp-LB-plate

Gelextraction of pTUM104 -f1,-Gal4

pTUM104 extraction was performed according to manufacturers protocoll

Concentration was measured with nanodrop

Probe: Concentration P265 12,8 ng/µl P264 12,9 ng/µl

Circularization of linearized plasmid backbone pTUM104

volume reagent
3,9 µl pYes2
1 µl T4 ligase
5 µl T4 ligase buffer
2,5 µl PEG 4000
35,1 µl H20
50 µl Volume

Ligation was performed over night at 16 C Negative control was done with H20 in exchange to pYES2

Repetition of Quickchange mutagenesis of lavendula limonene synthase

Investigator: Lara

Aim: No colonies were observable after second transformation of quickchange PCR products. Therefore the quickchange pcr reaction was repeated with a modified protocol:

PCR

Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P242
0.5 µl 1:10 dilution of O60 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Turbo DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P242
0.5 µl 1:10 dilution of O61 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
68°C 7 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were once more applied.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

! Unfortunately someone turned off the heat block, so that the reaction tube was below 37 °C (approx. 25 °C) for about 45 min. After recognition (after one hour of incubation), the heat block was turned on again and the reaction tube was incubated for another 30 min.

Transformation into E.coli Xl1-Blue

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation on ice for 25 min
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 25 min
  • plating of 100 µl on an Kan-LB-plate
  • sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Kan-LB-plate

PCR of C-LS3 (BBa_I742111, Trafo 16.6)

Investigator: Lara

Aim: To get more PCR product in case another preparative digest is needed.

Primer with consensus sequence

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer O27
1 µl 10 µM Reverse Primer O30
0.25 µl OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl Plasmid DNA (BBa_I742111) Clone 3
35.75 µl dd water
50 µL TOTAL

Primer without consensus sequence

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer O28
1 µl 10 µM Reverse Primer O30
0.25 µl OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl Plasmid DNA (BBa_I742111) Clone 3
35.75 µl dd water
50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
47 °C 30 s
68 °C 1,75 min
Final extension 68 °C 5 min
Hold 4 °C 1 h

Analytical gel electrophoresis

TUM12 LS AnalytGel0308.png

Preparation of YPD Medium and Picking of S. cerevisiae clones

Investigator: Lara, Katrin

YPD Yeast Extract Peptone Dextrose Medium (1 liter) the following substances were dissolved in 1000 ml of water and then autoclaved

  • 1% yeast extract
  • 2% peptone
  • 2% dextrose (D-glucose)

Picking of two clones of S. cerevisiae DD (17.17.2012): The clones were put into YPD medium and incubated at 30 °C over night. Additional 0,8 g Glucose were added to one of the cell culture tubes.

Friday, August 3rd

Transformation of E.coli Xl1-blue with Vector pGADT7-AD

Investigator:Georg

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 1 µl of pGADT7-AD (P98) was added to 100 µl of competent cells and mixed gently.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Transformation of E.coli Xl1-blue with pTUM104 overnight ligation

Investigator:Georg

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 1 µl of pGADT7-AD (P98) was added to 100 µl of competent cells and mixed gently.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Preparative digestion of TEF1-P and ADH1-P with XbaI and PstI

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
3 µl PstI-HF (NEB)
3 µl XbaI (NEB)
12 µl NEB-4 buffer
1,2 µl 100 x BSA (NEB)
40,8 µl dd H20
=60µl TOTAL
  • 20 µl Mastermix and 20 µl DNA were mixed and digestion processed at 37 C for 3 hours.

PCR of ADH1-T, TEF2-P, TEF1-T from Saccharomyces cerv. genome

Investigator: Georg

  • Reaction batch for PCR-ADH1-T:
volume reagent
10µl 5x One taq buffer
1 µl 10 mM DNTPs
1 µl O66/10
1µl O67/10
0,25 dd H20
=35,75µl TOTAL
  • Reaction batch for PCR-TEF2-P:
volume reagent
1,23 ml P237
10µl 5x One taq buffer
1 µl 10 mM DNTPs
1 µl O64/10
1µl O65/10
0,25 dd H20
=35,52µl TOTAL
  • Reaction batch for PCR-TEF2-P:
volume reagent
1,23 ml P237
10µl 5x One taq buffer
1 µl 10 mM DNTPs
1 µl O64/10
1µl O65/10
0,25 dd H20
=35,75µl TOTAL
  • Reaction batch for PCR-TEF1-T:
volume reagent
1,23 ml P237
10µl 5x One taq buffer
1 µl 10 mM DNTPs
1 µl O62/10
1µl O63/10
0,25 dd H20
=35,75µl TOTAL
  • Cycling condition were used as follows:
  • 94 C 30 sek
  • (30 Cycles) 94 C 30 sek
  • (30 Cycles) 56 C 60 sek
  • (30 Cycles) 68 C 2 min
  • Final extension: 68 C
  • Hold: 4 C
  • PCR was successful

Transformation of E.coli XL1 blue with ligation product P207/PCR39

Investigator: Lara

Aim: Incubation times of transformation of August 2nd had to be shortened because the lab employees left. Therefore the transformation didn't work properly. --> Repetition of the transformation of E.coli XL1 blue with ligation products P207/PCR39 and P207/NK.

Transformation into E.coli Xl1-Blue

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 5 µl of the ligation products
  • incubation on ice for 30 min
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 45 min
  • plating of 100 µl on an Chlp-LB-plate
  • sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Chlp-LB-plate

Analytical restriction digest of quickchange products

Investigator: Lara

Aim: Check whether site directed mutagenesis to eliminate Age1 restriction site has worked.

Quickchange PCR product purification: The Quickchange PCR products were purified with Qiagen PCR Purification Kit before analytical restriction digest:

  • P241 SDM: 7 ng/µl
  • P242 SDM: 63 ng/µl

Restriction digest of p241 SDM (31.7.), p242 SDM (2.8.) and p242 (as positive control)

volume reagent
2.5 µl plasmid DNA
0.25 µl Age1-HF
2 µl NEBuffer 4
2 µl BSA (10x)
13.25 µl ddH2O

Analytical Gel

1. Standard (1 kb Gene Ruler)

2. p242, digested with Age1 (positive control)

3. p241 SDM

4. p241 SDM, digested with Age1

5. p242 SDM

6. p242 SDM, digested with Age1

7. PCR 42

8. PCR 43

TUM12 LS Quickchange Analytgel.png

Transformation of E.coli XL1 blue with P242 SDM

Investigator: Lara

Aim: Incubation times of transformation of August 2nd had to be shortened because the lab employees left. Therefore the transformation didn't work properly. --> Repetition of the transformation with P242 SDM.

Transformation into E.coli Xl1-Blue

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • two transformations: 1. addition of 1 µl of the purified Quickchange PCR product; 2. addition of 4 µl of the purified Quickchange PCR product
  • incubation on ice for 30 min
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 45 min
  • plating of 100 µl on an Kan-LB-plate
  • sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Kan-LB-plate

Repetition of small-Scale Yeast Transformation of 4CL, CHS, OMT, PAL and APT in pTUM104

Investigator: Mary

Aim of the experiment:Transformation of P193 - P198, P200, P236, P263 and GFP (as a positive control - from simon) in Yeast

The protocol on page 13 of the pYES2 manual was used.

Only modifications are noted:

step 1: inoculate in 4 ml YPD medium

step 2: OD600 = 9 -> to determine a OD600 of 0.4 in 50 ml, 2.2 ml yeast suspension and 42.5 ml YPD medium were used, 5ml 20% Glucose was added (wrong information about the YPD-medium: we suggested that Glucose caramelizes when autoclaved together with medium - but it is not the case! Only agar and glucose will caramelize).

steps 3 and 4: centrifugation for 5 min, 4 °C

step 6:

1 µg plasmid DNA

  • P193: c = 110 ng/µl -> 9.1 µl
  • P194: c = 342 ng/µl -> 2.9 µl
  • P195: c = 423 ng/µl -> 2.4 µl
  • P196: c = 92 ng/µl -> 10.8 µl
  • P197: c = 394 ng/µl -> 2.5 µl
  • P198: c = 183 ng/µl -> 5.5 µl
  • P200: c = 464 ng/µl -> 2.2 µl
  • P236: c = 291 ng/µl -> 3.4 µl
  • P263: c = 158 ng/µl -> 6.3 µl
  • Positive control: 2.19/4 (pYES2+EGFP) c = 200 ng/µl -> 5µl

100 µg denatured sheared salmon sperm: the one from Simon was used -> 10 µl

step 7:

7 ml 50% PEG3350 was synthesized (3.5 g in 7 ml bidest.water) 6.4 ml 50% PEG3350 + 800 µl 10x LiAc + 800 µl 10x TE were mixed

The cells were plated out on SC-U plates with Glucose and incubated the weekend at 30°C

Transformation of E.coli XL1 blue with ligation products

Investigator: Katrin

Aim: Transformation of ligation products PCR2/P133, PCR1/P133, MK/P133, PCR2/P175, MK/P175

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • of 1 µl of the SDM PCR product or 5 µl of ligation product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 45 min
  • plate 100 µl on an Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133)
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an antibiotic containing LB-plate

Sunday, August 5th

PCR of pGBKT7 (P99) to introduce RFC pre- and suffix to Gal4 DNA binding domain (Gal4DBD/Gal4BD)

Investigator: Jeff

Aim of the experiment:PCR of pGBKT7 (P99) to introduce RFC pre- and suffix to Gal4 DNA binding domain (Gal4DBD/Gal4BD) for fusion protein construction of N'-PhyB(N-Terminus)-20aaLinker-GalDBD-C'. (If there is time one can direcly clone PhyB in the C-Terminus of Gal4DBD directly.)

Procedure:

  • PCR with primer: TUM12-Gal4BD-fw and TUM12-Gal4BD-rv
  • Reaction batch:
volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 100 µM Forward Primer O73 (TUM12-Gal4BD-fw)
1 µl 100 µM Reverse Primer O74 (TUM12-Gal4BD-rv)
0.25 µL OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl Plasmid DNA P99
35.75 µL ddH2O
=50 µL TOTAL
  • The PCR program was performed after following scheme with following conditions
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
57 °C 30 s
68 °C 30 s
Final extension 68 °C 5 min
Hold 4 °C infinite

Transfer of old transformed E. coli XL-1 blue from old antibiotic plates to new antibiotic plates and of old Y190 S. cerevisiae strain to a new YPD plates

Investigator: Jeff

Aim of the experiment: Transfer of old transformed E. coli XL-1 blue from old antibiotic plates to new antibiotic plates and of old Y190 S. cerevisiae strain to a new YPD plates.

Procedure:

  • Transformed E. coli XL1-Blue: With an incolution loop under sterile conditions the bacteria colonies from the plates were transferred by dilution plating on new antibiotic plates. Attempts were made to take all the colonies to have a multiclonal plate.
  • The E. coli XL1-Blue plates from these transformations were taken:
Parts for Phycocyanobilin synthesis:
BBa_I15008 in pSB2K3 (KanR): Heme oxygenase
Parts for N'-SV40NLS-PhyB(NT)-20aaLinker-LexA-C' and N'-PhyB(NT)-20aaLinker-Gal4DBD-C'/N'-SV40NLS-PhyB(NT)-20aaLinker-Gal4DBD-C' construction:
BBa_K207000 in pSB3K3 (KanR): PhyB(621NT)-GalDBD BBa_K207001 in pSB1A2 (AmpR): PhyB(621NT) BBa_K105005 in pSB2K3 (KanR): LexA DNA binding protein pGBKT7 (KanR): Yeast-two-hybrid vector with C-terminal MCS after Gal4 DNA binding domain (Gal4DBD/Gal4BD)
Parts for N'-Gal4AD-linker-Pif3 construction:
BBa_K365000 in pSB1C3 (CamR): Pif3(100NT) pGADT7 AD (AmpR): Yeast-two-hybrid vector with C-terminal MCS after Gal4 transcription activation domain (Gal4AD)
Oligopeptide linkers for linkage of two functional independent protein domains:
BBa_K365005 in pSB1C3 (CamR): 20 amino acids long linker with RFC25 pre- and suffix BBa_K243006 in BBa_K157000 (AmpR): 12 amino acids long linker (Gly-Gly-Ser-Gly)x3
Synthetical promoter constructs for LexA based Y2H:
BBa_K165055 in BBa_J63009 (AmpR): LexA binding sites + mCYC + Kozak + YFPx2 + ADH1 terminator BBa_K165031 in pSB1AK3 (AmpR, KanR): LexA binding sites + mCYC
  • Y190 S. cerevisiae: With an incolution loop under sterile conditions the yeast colonies from the plates were transferred by dilution plating on new YPD plates. Attempts were made to take all the colonies to have a multiclonal plate.
Genotype:
MATa ura3-52 his3-200 ade2-101 lys2-801 trp1-901 leu2-3, 112 gal4Δ gal80Δ cyhR2 LYS2 : : GAL1(UAS)-HIS3(TATA)-HIS3 MEL1 URA3 : : GAL1UAS-GAL1TATA-lacZ
Reporters:
HIS3 lacZ MEL1
Transformation markers
trp1 leu2 cyhR2

Picking from the overnight transformation of ligated P207+PCR39 product in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment: Picking from the overnight transformation of ligated P207+PCR39 product in E. coli XL1-Blue from the August, 2nd and August, 3rd.

Procedure:

  • 4 colonies from August, 2nd and 4 colonies from August, 3rd were taken. Total: 8 colonies.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C. P207+PCR39 (CamR).

Picking of E. coli XL1-Blue transformed with BBa_K165055

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL1-Blue transformed with BBa_K165055.

Procedure:

  • 2 colonies were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C. BBa_K165055 in BBa_J63009 (AmpR).

Picking of E. coli XL1-Blue transformed with pGADT7 AD

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL1-Blue transformed with pGADT7 AD.

Procedure:

  • 2 colonies were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C. pGADT7 AD (AmpR).

Picking of clones of transformation August, 1st, 2nd and 3rd

Investigator: Jeff

Aim: Picking.

Procedure:

  • 3 or 4 clones were picked for each ligation. Clones containing pYES2-new were put into 4 ml LB with 4 µl of ampillicin stock solution, clones containing pSB1C3 were put into chloramphenicol containing media. Incubation at 37 °C overnight.

Week 9

Monday, August 6th

Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR39

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR39

Procedure:

  • Miniprep was done after manufacturer's protocol for 8 picked colonies. (P285-P292)

Analytical digestion and gelelectrophoresis of miniprep P285-P292

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion with NgoMIV+PstI-HF and gelelectrophoresis of miniprep P285-P292.

Procedure:

  • Mastermix for NgoMIV+PstI-HF
volume reagent
22 µl NEBuffer 4 (10x)
2.75 µl NgoMIV
2.75 µl PstI-HF
165 µl ddH2O
=192.5 µl TOTAL
  • Reaction batch
volume reagent
2,5 µl Plasmid-DNA (P285-P292)
17,5 µl Mastermix for NgoMIV+PstI-HF
=20 µl TOTAL
100 bp ladder DNA ladder P285 P286 P287 P288 P289 P290 P291 P292 P295 P296 1 kbp ladder DNA ladder
Corrupt Ligation successful Ligation successful Ligation successful Ligation successful Ligation successful Ligation successful Ligation successful please see next subsection plase see next subsection

TUM12 20120806 anal Gel No1.JPG

Analytical digestion and gelelectrophoresis of miniprep P295, P296

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion with XbaI+PstI-HF and gelelectrophoresis of miniprep P295 and P296.

Procedure:

  • Digestion reaction batch
volume reagent
2.5 µl Plasmid-DNA (P295, P296)
0.25 µl XbaI
0.25 µl PstI-HF
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
14.8 µl ddH2O
=20 µl TOTAL
100 bp ladder DNA ladder P285 P286 P287 P288 P289 P290 P291 P292 P295 P296 1 kbp ladder DNA ladder
Please see last subsection Please see last subsection Please see last subsection Please see last subsection Please see last subsection Please see last subsection Please see last subsection Please see last subsection corrupt corrupt

TUM12 20120806 anal Gel No1.JPG

Analytical digestion and gelelectrophoresis of miniprep P293, P294

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion and gelelectrophoresis of miniprep P2P93, P294 to see whether the enzymes EcoRI and BamHI are working. Because the size of the insert is too short, the backbone is additionally cut with Eco91I (cuts only 1x in the backbone). So digestion were done with EcoRI+Eco91I and BamHI+Eco91I.

Procedure

  • Reaction batch for P293:
volume reagent
2.5 µl Plasmid-DNA (P293)
0.25 µl EcoRI (Fermentas)
0.25 µl Eco91I (Fermentas)
2 µl Buffer 0 (Fermentas)
15 µl ddH2O
=20 µl TOTAL
  • Reaction batch for P294:
volume reagent
2.5 µl Plasmid-DNA (P293)
0.5 µl BamHI (Fermentas)
0.25 µl Eco91I (Fermentas)
4 µl Tango-Buffer (10x) (Fermentas)
12.75 µl ddH2O
=20 µl TOTAL
100 bp ladder DNA ladder P293 (digested with EcoRI+Eco91I) P294 (digested with BamHI+Eco91I) PCR48 PCR49 P230 P231 1 kbp ladder DNA ladder
2 DNA strands are visible and have expected length 2 DNA strands are visible and have expected length Please see next subsection Please see next subsection Please see next subsection Please see next subsection

TUM12 20120806 anal Gel No2.jpg

Analytical digestion and gelelectrophoresis of miniprep P230 and P232

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion and gelelectrophoresis of miniprep P230 and P232 to check whether the oligohybrdization product PCR34 has been successful ligated to pSB1C3 with RFC25 pre- and suffix.

Procedure:

  • Reaction batch for P230 and P231:
volume reagent
2,5 µl Plasmid-DNA (P285-P292)
17,5 µl Mastermix for NgoMIV+PstI-HF (please see subsection: "Analytical digestion and gelelectrophoresis of miniprep P285-P292 ")
=20 µl TOTAL
100 bp ladder DNA ladder P293 P294 PCR48 PCR49 P230 P231 1 kbp ladder DNA ladder
Please see next subsection Please see next subsection Please see next subsection Please see next subsection 91 bp long insert seems to be visible after manual gain of signal 91 bp long insert seems to be visible after manual gain of signal
  • To be sure, one has to sequence this with the iGEM primer VF2 (O68) and VR (O69).

TUM12 20120806 anal Gel No2 edit.jpg

Analytical gelelectrophoresis of PCR48 and PCR49

Investigator: Jeff, Dennis

Aim of the experiment: Analytical gelelectrophoresis of PCR48 and PCR49 to check whether the PCR has been successful.

Procedure:

100 bp ladder DNA ladder P293 P294 PCR48 PCR49 P230 P231 1 kbp ladder DNA ladder
Please see next subsection Please see next subsection PCR was successful PCR was successful Please see next subsection Please see next subsection

TUM12 20120806 anal Gel No2.jpg

Preperative digestion of P289

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P289 in order to fuse insert (LexA with RFC25 pre- and suffix) into the N-terminus of 20aa linker in pSB1C3 (P206). Intermediate construction: N'-20aaLinker-LexA-C'. Final construction should be N'-SV40NLS-PhyB(642NT/908NT)-20aaLinker-LexA-C'.

Procedure:

  • Reaction batch:
volume reagent
20 µl Plasmid 289
4 µl NEBuffer 4 (10x)
2 µl NgoMIV (10 U/µl)
1 µl PstI-HF (20 U/µl)
11 µl ddH2O
=40 µl TOTAL
  • Preperative gelelectrophoresis was done the next day

Extraction of ADH1-Promoter, CYC1-Terminator, TEF1-Promoter

Investigator: Georg

Aim of the experiment: Miniprep of overnight cultures of transformed E. coli XL1-Blue

Procedure:

  • Miniprep was done after manufactuer's protocol for 3x3 colonies.

PCR of TEF1-Terminator, TEF2-Promoter and ADH1-Terminator with PCR-purification

Investigator: Georg

Aim of the experiment: Amplification of TEF1-Terminator, TEF2-Promoter from genomic DNA of Saccharomyces cerevisiae and ADH1-Terminator from yeast Vector PGADT7 AD

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer
1 µl 10 µM Reverse Primer
0.25 µl OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
1,3µl P237 1µl P98
33.75 µl dd water
50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
56 °C 1 min
68 °C 2 min
Final extension 68 °C 5 min
Hold 4 °C 1 h
  • Afterwards, the PCR-product was purified by Quiaquick PCR purification KIt
  • The success of the PCR was tested by analytical gelelectrophoresis

20120806 PCR ADHt,TEF1t,TEF2p.png

Preparative digestion of PCR products and TEF1-,ADH1-Promoter with XbaI and PstI

Investigator: Georg

  • Mastermix for XbaI+PstI-HF
volume reagent
12 µl NEBuffer 4 (10x)
3 µl XbaI
3 µl PstI-HF
1,2 µl BSA 100x
20,8 µl ddH2O
=40 µl TOTAL
  • Mastermix for XbaI+PstI-HF
volume reagent
15 µl NEBuffer 4 (10x)
3 µl XbaI
3 µl PstI-HF
1,5 µl BSA 100x
27,5 µl ddH2O
=50 µl TOTAL

20120806 Prep Gel TEf1p, ADH1p.png 20120806 prep gel PCR Prod.png

Ligation of lavendula LS and citrus LS with pSB1C3 and pTUM104

Investigator: Andrea

Procedure

Substance Volume
P175 1 µl (~100 ng vector dna)
PCR 42 RL 0.8 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 15.7 µl
TOTAL =20 µl

Miniprep of Ligation of PCR1 and PCR2 in P133 or P175

Investigator: Andrea

Using a Quiagen Miniprep kit. The miniprep products were named P266-P284.

The resulting plamid-concentrations (measured with nanodrop) were

  • P 266: 1,3 ng/µl
  • P 267: 0,2 ng/µl
  • P 268: 1,0 ng/µl
  • P 269: 13,5 ng/µl
  • P 270: 10,3 ng/µl
  • P 271: 12,1 ng/µl
  • P 272: 14,7 ng/µl
  • P 273: 12,8 ng/µl
  • P 274: 13,2 ng/µl
  • P 275: 9,4 ng/µl
  • P 276: 8,5 ng/µl
  • P 277: 12,4 ng/µl
  • P 278: 10,2 ng/µl
  • P 279: 7,1 ng/µl
  • P 280: 5,7 ng/µl
  • P 281: 8,0 ng/µl
  • P 282: 8,6 ng/µl
  • P 283: 31,4 ng/µl
  • P 284: 12,6 ng/µl

PCR of Schwab plasmid Quickchange-DNA to amplify gene for lavendula LS

Instructor: Andrea

Aim: PCR of Schwab plasmids after Quickchange-Mutagenesis with primers which were designed to amplify the lavendula LS gene and to add RFC25 restriction sites.

3 different primer combinations were used:

1. O33/O37

2. O34/O37

3. O35/O37

Each primer combination was used for plasmid DNA amplification of P283.

PCR reaction mixture

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer
1 µl 10 µM Reverse Primer
0.25 µl OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
3 µl Plasmid DNA P283
33.75 µl dd water
50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
50 °C 30 s
68 °C 1,75 min
Final extension 68 °C 5 min
Hold 4 °C 1 h

Preparation of SC-U medium with 2% glucose (300ml) or galactose (700 ml) for expression in Saccharomyces cerevisiae

Investigator: Daniela

1 l medium:

  • One alliquot (50 ml) of amino acis prepared by Alois Bräuer was used
  • 6.7 g yeast nitrogen base
  • 850 ml ELGA water
  • after dissolving, the solution was divided into 270 ml and 630 ml
  • autoclaving

Sugar solution were prepared separately:

  • 6 g glucose were dissolved in 30 ml ELGA water
  • 14 g galactose were dissolved in 70 ml ELGA water
  • autoclaving

After autoclaving:

  • 30 ml of glucose solution were added to 270 ml SC-U medium
  • 70 ml of galactose solution were added to 630 ml SC-U medium

Inoculation of Saccharomyces cerevisiae colonies of transformation products from August, 3rd

Investigator: Daniela

Aim of the experiment: First step of the expression protocol in Saccharomyces cerevisiae

Inoculation of a single colony of Saccaromyces cerevisiae transformed with enzymes PAL+/-, 4CL+/-, CHS+/-, OMT+/-, APT and the positive control GFP in pTUM104, respectively in 15 ml of SC-U medium with 2% glucose. Incubation at 30°C over night.

Tuesday, August 7th

Plating of received E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003

Investigator: Jeff

Aim of the experiment: The received biobricks were already transformed in E. coli and were in an agar stabs. These E. coli cells were transferred with an inoculation loop on antibiotic selection plates and were incubated over night. The received biobricks were: BBa_K181000 (This is the PcyA gene, known to convert biliverdin to phycocyanobilin, codon optimized for S. cerevisiae (baker's yeast). ), BBa_K365002 (This part consists in the first 908 amino-acids of Phytochrome B from A. thaliana.) and BBa_K365003 (This part consists in the first 642 amino-acids of Phytochrome B from A. thaliana.).

Procedure:

  • Bacterias containing plasmids with biobricks were transferred with a sterile inoculation loop on antibiotic plates and were incubated at 37 °C overnight.
  • The biobricks were: BBa_K181000 in BBa_J63010 (AmpR), BBa_K365002 in pSB1C3 (CamR) and BBa_K365003 in pSB1C3.

Preperative gelelectrophrosis of digested P289

Investigator: Jeff, Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P289 in order to fuse insert (LexA with RFC25 pre- and suffix) into the N-terminus of 20aa linker in pSB1C3 (P206). Intermediate construction: N'-20aaLinker-LexA-C'. Final construction should be N'-SV40NLS-PhyB(642NT/908NT)-20aaLinker-LexA-C'.

Procedure:

  • Gelelectorphoresis was performed on a 1% low-melting agarose gel at 70  for 1.5 h.
  • DNA strand at about 600-700 bp was cut out
  • Cut out band was purified with gel extraction kit from Qiagen after manufacturer's protocol.

TUM12 20120807 prep gel lexa rfc25.jpg

Ligation of P206+P310

Investigator: Jeff, Dennis

Aim of the experiment: Ligation of P206+P310

Procuedure: Reaction batch

Substance Volume
P206 1.7 µl (~100 ng vector DNA)
P310 8.5 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 7.3 µl
TOTAL =20 µl

Preperative digestion and gelelectrophrosis of P123 and P80

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P80 and P123 in order to fuse insert (Pif3 with RFC25 pre- and suffix) of P80 into the C-terminus of 20aa linker in pSB1C3 (P123). Intermediate construction: N'-Pif3-20aaLinker-C'. Final construction should be N'-Pif3-20aaLinker-Gal4AD-C'.

Procedure:

  • Reaction batch for P123:
volume reagent
20 µl Plasmid-DNA P123
4 µl NEBuffer 4 (10x)
1 µl EcoRI-HF (20 U/µl)
2 µl NgoMIV (10 U/µl)
13 µl ddH2O
=40 µl TOTAL
  • Reaction batch for P80:
volume reagent
20 µl Plasmid-DNA P80
4 µl NEBuffer 4 (10x)
0.44 µl BSA (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl AgeI (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Gelelectorphoresis was performed on a 1% low-melting agarose gel at 70  for 1.5 h.
  • DNA strand at about 300 bp from P80 was cut out. And the band from P123 at about 2.1 kbp was cut out.
  • Cut out bands were purified with gel extraction kit from Qiagen after manufacturer's protocol.
P80 digested with EcoRI-HF+AgeI-HF 100 bp ladder DNA ladder P123 digested with EcoRI-HF+NgoMIV 1 kbp ladder DNA ladder
Gel OK Gel OK

TUM12 20120807 prep Gel Pif3RFC25 pSB11C320aaLinker.JPG

Ligation of P311+P312

Investigator: Jeff

Aim of the experiment: Ligation of P311+P312

Procuedure: Reaction batch

Substance Volume
P312 1.92 µl (~100 ng vector DNA)
P311 6.38 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 9.2 µl
TOTAL =20 µl

Picking of received E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003

Investigator: Jeff

Aim of the experiment: Picking of received E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003.

Procedure:

  • For each biobrick 1 coloniy was taken with a pipette tip and transferred into a cell-culture tube with 4  of LB-medium and antibiotics (CamR for BBa_K365002 and BBa_K365003, AmpR for BBa_K181000).
  • These 3 tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Preparative restriction digest of PCR 56,57,58 (lavendula LS) and PCR 42,43 (citrus LS)

Investigator: Lara

Aim: Prepare digested PCR fragments for further ligation into pTUM104 and pSB1C3.

volume reagent
25 µl PCR products
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
17.5 µl ddH2O
=50 µl TOTAL
  • A mastermix for 16 reactions was produced.
  • PCR products were digested at 37 °C for 3 hours.

P187 was used as positive control for restriction digest:

  • 3 µl p187 + 15 µl of Mastermix (see above)

Gelelectrophoresis:

Gel 1:

1. Gene ruler 1 kb

2. PCR 42

3. PCR 43

5. P187

Gel 2:

1. Gene ruler 1 kb

2. PCR 56

3. PCR 57

4. PCR 58

TUM12 LS 0808 prepgel2.png TUM12 LS 0808 prepgel1.png

Digested PCR products (PCR 42 RL, PCR 43 RL, PCR 56 RL, PCR 57 RL, PCR 58 RL) are stored in the iGEM PCR product box at -20°C.

  • RL = ready for ligation
  • concentrations:

PCR 42: 102 ng/µl

PCR 43: 60 ng/µl

PCR 56: 35 ng/µl

PCR 57: 34 ng/µl (consumed)

PCR 58: 40 ng/µl

Analytical restriction digest of ligation products after miniprep

Investigator: Lara

Aim: Check ligation of PCR 1 and PCR 2 into pTUM104 and pSB1C3.

volume reagent
20 µl miniprep products
2.3 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl XbaI (20 U/µl)
0.25 µl Pst1-HF (20 U/µl)
=23 µl TOTAL
  • Incubation at 37°C for 2 h.

Gelelectrophoresis:

TUM12 LS 0808 analytgel2.png TUM12 LS 0808 analytgel1.png

Ligation of lavendula LS and citrus LS with pSB1C3 and pTUM104

Investigator: Lara

Aim: Ligate both lavendula and citrus limonene synthase (with all primer combinations -> with or without consensus sequence) with pSB1C3 and pTUM104.

Procedure

PCR 42 RL in pYES (p175)

Substance Volume
P175 1 µl (~100 ng vector dna)
PCR 42 RL 0.8 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 15.7 µl
TOTAL =20 µl

PCR 42 RL in pSB1C3 (p133)

Substance Volume
P133 2.5 µl (~100 ng vector dna)
PCR 42 RL 2.5 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 12.5 µl
TOTAL =20 µl

PCR 43 RL in pYES (p175)

Substance Volume
P175 1 µl (~100 ng vector dna)
PCR 43 RL 1.5 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 15.0 µl
TOTAL =20 µl

PCR 43 RL in pSB1C3 (p133)

Substance Volume
P133 2.5 µl (~100 ng vector dna)
PCR 43 RL 4 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 11 µl
TOTAL =20 µl

PCR 56 RL in pYES (p175)

Substance Volume
P175 1 µl (~100 ng vector dna)
PCR 56 RL 2 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 14.5 µl
TOTAL =20 µl

PCR 56 RL in pSB1C3 (p133)

Substance Volume
P133 2.5 µl (~100 ng vector dna)
PCR 56 RL 6 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 9 µl
TOTAL =20 µl

PCR 57 RL in pYES (p175)

Substance Volume
P175 1 µl (~100 ng vector dna)
PCR 57 RL 2 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 14.5 µl
TOTAL =20 µl

PCR 57 RL in pSB1C3 (p133)

Substance Volume
P133 2.5 µl (~100 ng vector dna)
PCR 57 RL 6 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 9 µl
TOTAL =20 µl

PCR 58 RL in pYES (p175)

Substance Volume
P175 1 µl (~100 ng vector dna)
PCR 58 RL 2 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 14.5 µl
TOTAL =20 µl

PCR 58 RL in pSB1C3 (p133)

Substance Volume
P133 2.5 µl (~100 ng vector dna)
PCR 58 RL 6 µl (~3x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 9 µl
TOTAL =20 µl

Negative control/pYES (p175)

Substance Volume
P175 1 µl (~100 ng vector dna)
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 16.5 µl
TOTAL =20 µl

Negative control/pSB1C3 (p133)

Substance Volume
P133 2.5 µl (~100 ng vector dna)
T4 ligase 0.5 
T4 ligase buffer 2 µl
ddH2O 15 µl
TOTAL =20 µl
  • ligation over night at 16 °C (waterbath).

Eppis with Ligation products are stored in two 50 ml Falcon tubes at -20°C (lowest drawer)!

Induction of PAL,4CL,CHS,OMT,APT and GFP in pTUM104 in S. cerevisiae in SC-U medium with 2% galactose

Investigator: Mary, Daniela

Aim of the experiment: Expression of all enzymes in Saccharomyces cerevisiae.

enzyme OD600 volume to be pelleted [ml]
PAL+ 3.246 6.2
PAL- 3.604 5.5
4CL+ 3.875 5.2
4CL- 4.0 5.0
CHS+ 3.685 5.43
CHS- 6.68 5.43
OMT+ 3.795 5.27
OMT- 4.085 4.896
APT 3.415 5.86
GFP 3.855 5.188

Incubation at 30 °C over night.

Preparation of solutions for generating chemo competent E.Coli- cells

Investigator: Roman

Procedure:

Required solutions (for a 24ml suspension of competent cells)

  • 0,1 M MgCl2
  • 0,05 M CaCl2
  • 0,05 M CaCl2, 15% v/v glycerine

Prepared volumes:

  • 30 ml CaCl2, 15% v/v glycerine; 0,22g CaCl2 were mixed with 4,5 ml glycerine and 25,5 ml bidestillated water and autoclaved
  • 500 ml MgCl2; 10,17g MgCl2 were mixed with 500 ml bidestillated water and autoclaved
  • 250 ml CaCl2; 1,84g CaCl2 were mixed with 250 ml bidestillated water and autoclaved

Preparation of competent cells see next day.

Wednesday, August 8th

Miniprep of overnight culture of E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of overnight culture of E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003.

Procedure:

  • Miniprep with Kit from Qiagen after manufacturer's protocol

Preperative digestion and gelelectrophoresis of P27 and P315

Investigator: Jeff, Dennis

Aim of the experiment:

Procedure:

  • Reaction batch for P27:
volume reagent
25 µl Plasmid-DNA P27
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
8.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for P315:
volume reagent
25 µl Plasmid-DNA P27
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
8.6 µl ddH2O
=40 µl TOTAL
P27 digested with XbaI+PstI-HF BBa_I15008: Heme oxygenase 1 (HO1) 100 bp DNA ladder P315 digested with XbaI+PstI-HF BBa_K181000: PcyA 1 kbp DNA ladder
Backbone and insert correct Backbone and insert correct

TUM12 20120808 prep Gel 1.jpg

Analytical digestion and gelelectrophoresis of P313 BBa_K365002: PhyB(908NT)and P314 BBa_K365003 : PhyB(642NT)

Investigator: Jeff, Dennis

Aim of the experiment:

Procedure:

  • Reaction batch for P313 (BBa_K365002):
volume reagent
2.5 µl Plasmid-DNA P313
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl XbaI (20 U/µl)
0.25 µl PstI-HF (20 U/µl)
14.8 µl ddH2O
=20 µl TOTAL
  • Reaction batch for P314 (BBa_K365003):
volume reagent
2.5 µl Plasmid-DNA P313
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl XbaI (20 U/µl)
0.25 µl PstI-HF (20 U/µl)
14.8 µl ddH2O
=20 µl TOTAL
100 bp DNA ladder P313 digested with XbaI+PstI-HF (BBa_K365002: PhyB(908NT) P314 digested with XbaI+PstI-HF (BBa_K365003: PhyB(642NT) 1 kbp DNA ladder
Backbone and insert correct Backbone and insert correct

TUM12 20120808 anal Gel 3.jpg

Transformation of E. coli XL1-Blue with ligation products P206+P310 and P312+P311

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P206+P310 (N'-20aaLinker-LexA-C' construction) and P312+P311 (N'-Pif3-20aaLinker-C')

Procedure:

  • Transformation was performed after standard transformation protocol from the lab.
  • Transformated E. coli XL1-Blue cells were plated on antibiotic plates and were put at 37 °C overnight.
  • P206+P310 (CamR), P312+P311 (CamR)

Picking of E. coli XL1-Blue colonies containing BBa_K365000

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL1-Blue colonies containing BBa_K365000 to a miniprep on the nextday from the overnight culture.

Procedure:

  • 3 colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Miniprep of ligation products of transformation from August 3rd

Investigator: Lara

Aim: Get transformed plasmids for further analytical restriction digest to check whether ligation worked.

Procedure: Miniprep was done using Qiagen miniprep kit.

  • PCR1/p175 clone 1: 200 ng/µl
  • PCR1/p175 clone 2: 260 ng/µl
  • PCR1/p175 clone 3: 460 ng/µl
  • PCR1/p175 clone 4: 450 ng/µl
  • PCR2/p175: 222 ng/µl
  • PCR2/p133 clone 1: 145 ng/µl
  • PCR2/p133 clone 2: 150 ng/µl
  • PCR2/p133 clone 3: 140 ng/µl
  • PCR2/p133 clone 4: 510 ng/µl

Eppis containing miniprep products were stored in 50 ml Falcon tubes at the lowest drawer of -20°C. --> will be thrown away in case ligation hasn't worked.

Analytical restriction digest of miniprep products

Investigator: Lara

Aim: Analytical restriction digest to check whether ligation of Tuesday, July 31st has worked.

volume reagent
2.5 µl plasmid DNA
0.25 µl Xba1
0.25 µl Spe1
2 µl NEBuffer 4
0,2 µl BSA (100x)
14.8 µl ddH2O
  • Incubation for 1.5 h at 37°C.

Analytical Gel

1. Standard (1 kb Gene Ruler)

2. PCR1/p175 clone 1

3. PCR1/p175 clone 2

4. PCR1/p175 clone 4

5. PCR1/p175 clone 3

6. PCR2/p175

7. PCR2/p133 clone 1

8. PCR2/p133 clone 2

9. PCR2/p133 clone 3

10.PCR2/p133 clone 4 --> successful!

TUM12 LS analytgel 0808.png

Transformation of ligation products from ligation of August 7th

Investigator: Lara

Aim: Transform E.coli XL 1 blue with ligation products to produce colonies containing plasmid DNA.

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • adding of 5 µl of ligation products
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 60 min
  • plating of 100 µl of the cells on an Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133)
  • sedimentation of the leftover in a centrifuge (30 - 60 sec, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Cell lysis of S. cerevisiae

Investigator: Mary,Daniela

Aim of the experiment:Receive (hopefully) expressed enzymes.

The protocol 'Expression Hefe' (Dropbox) was used. If you want to repeat the experiment please read comments before you start.

You should make a glycerol stock of clones picked. You should as well take a sample of the uninduced yeast and do a cell lysis to be able to compare the induced and uninduced status.

Preparation of sodium phosphate buffer (50 mM):

  • 1 M Na2HPO4x2H2O (M = 177.99 g/mol): 1.7799 g dissolved in 10 ml ELGA water
  • 1 M NaH2PO4x2H2O (M = 156.01 g/mol): 0.468 g dissolved in 3 ml ELGA water
  • 8.095 ml Na2HPO4 and 1.905 ml NaH2PO4 and 190 ml ELGA water were mixed -> pH should be 7.5 but in our case it wasn't. Therefore we used all of the Na2HPO4, but could only achieve an pH of 7.47.

Preparation of PMSF (100 mM)->solution is in the fridge:

  • 0.0174 g were dissolved in 1 ml isopropanol (techn.)

Preparation of breaking buffer:

  • 11.25 ml sodium phosphate buffer (50 mM)
  • 750 µl Glycerol (80%)
  • 24 µl EDTA

Preparation of breaking buffer with PMSF:

  • 6 ml of breaking buffer
  • 60 µl of PMSF (100 mM)

Preparations for SDS gel the next day:

The absorption A280 was measured with Nano Drop. The SDS gel should be loaded with 30 µg protein, each assay was filled up with buffer to a total volume of 10 µl. 2.5 µl 5xLaemmlired were added and all assays were denatured at 95 °C for 5 min.

enzyme concentration [mg/ml] (A280) concentration of 1:10 dilution [mg/ml] (A280) volume of 1:10 dilution with 30 µg protein [µl]
PAL+ 64.024 7.946 3.78
PAL- 61.140 8.605 3.486
4CL+ 85.65 9.459 3.17
4CL- 54.166 7.443 not applied on the gel
CHS+ 65.338 6.045 4.96
CHS- 51.167 6.135 4.89
OMT+ 49.128 5.453 5.5
OMT- 62.074 4.193 7.15
APT 42.554 4.787 6.27
GFP 36.443 4.247 7.06

Preparation chemocompetent E.Coli- cells

Investigator: Roman, Simon

Operational sequence:

The competent cells were prepared as described in the protocoll:

  • 600ml LB medium were inoculated with 6ml of an E.Coli XL1 blue overnight culture and grown to an OD550 of 0,67
  • centrifugation and washing of the cells as described in the protocol
  • cells were aliquoted as 100µl suspensions in the cold room
  • storage at -80°C

Thursday, August 9th

Gelextraction of PCR 50-55 and P297-P302

Investigator: Georg

  • Gelextraction was done according to Quiaquick gelextraktion protocoll

Nanodrop measurement of PCR 50-55 and P297-302

Investigator: Georg

  • PCR products 50-55 (ADH1-T, TEf1-T, TEF2-P) and P297-302 (TEF1-P, ADH1-P) were measured with Nanodrop in ng/µl
  • ADH1-T: 22,4
  • TEF2-P: 7,4
  • TEF1-P: 16,8
  • ADH1-P: 52,6

Investigator: Georg

Ligation of TEF1-P, TEF2-P ADH1-T, TEF1-T and ADH1-T and pTUM104

Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
3,48 µl P132 (psb1c3 33,5 ng/µl)
2 µl 10x T4-ligase buffer
4,52 µl TEF1-P (16,8 ng/µl)
9,5 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
1,46 µl P132 (psb1c3 33,5 ng/µl)
2 µl 10x T4-ligase buffer
6,54 µl TEF2-P (7,4 ng/µl)
9,5 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
3,42 µl P132 (psb1c3 33,5 ng/µl)
2 µl 10x T4-ligase buffer
4,52 µl ADH1-P (52,6 ng/µl)
9,5 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
0,94 µl P132 (psb1c3 33,5 ng/µl)
2 µl 10x T4-ligase buffer
7,06 µl TEF1-T (3,1 ng/µl)
9,5 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
4,44 µl P132 (psb1c3 33,5 ng/µl)
2 µl 10x T4-ligase buffer
4,44 µl ADH1-T (22,4 ng/µl)
9,5 µl dd H20
=20µl TOTAL

Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
8 (=100 ng) pYESII (12,8 ng/µl)
2 10x T4-ligase buffer
2 µl 50% PEG 4000
7,5 µl dd H20
=100µl TOTAL
  • From these ligation batches, overnight reactions were generated with negative control.

PCR amplification of a fragment of P313

Investigator: Roman

Aim of experiment: Amplification of wanted fragment

Operational Sequence:

PCR- reaction batch was prepared as follows:

substrate volume in µl
ddH2O 35,75
One Taq Standard Reaction Buffer (5x) 10
Plasmid template (p313) 1
Primer O70 (10 µM) 1
Primer O72 (10 µM) 1
dNTP (10 mM) 1
Polymerase One Taq 0,25

Negative control was prepared the same way, with 1 µl ddH2O instead of plasmid template.

PCR temperature program:

  • initial heating: 94°C for 30s
  • 30 cycles
  • denaturation: 94°C for 30s
  • annealing: 67°C for 60s
  • elongation: 68°C for 3 min
  • final elongation: 68°C for 5 min
  • 4°C

Afterwards, the PCR reaction tubes were stored over night in the fridge at 4 °C

Miniprep of picked E. coli XL1-Blue containing BBa_K365000

Investigator: Dennis

Aim of the experiment: Miniprep of picked E. coli XL1-Blue containing BBa_K365000. From those minipreps PCRs should be done to introduce RFC25 pre- and suffixes and MfeI and BamHI restriction sites.

Procedure:

  • Miniprep was performed with Qiaprep Spin miniprep kit from Qiagen.
  • Miniprep was performed after manufacturer's protocol.

Preperative digestion and gelelectrophoresis of P324

Investigator: Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P324 for fusion protein construction the plasmid containing the phytochrome interacting factor 3 including the RFC25 pre- and suffix was digested with NgoMIV and PstI-HF.

Procedure:

  • Reaction batch:
volume reagent
20 µl Plasmid-DNA Pxxx
4 µl NEBuffer 4 (10x)
2 µl NgoMIV (10 U/µl)
1 µl PstI-HF (20 U/µl)
13 µl ddH2O
=40 µl TOTAL
  • After 2-3 h of incubation time at 37 °C the reaction mix was mixed with 4.44 µl DNA running buffer (10x) and was pipetted into a gelpocket of an 1% low-melting agarose gel.
  • The gel was running for about 1  at 80 V
  • Then the gel extraction kit from Qiagen was used for extracting the linearized insert from the agarose gel.

TUM12 20120809 dennis präp verdau baa36500.jpg

Picking from the overnight transformation of ligated P206+P310 product and P312+P311 product in E. coli XL1-Blue

Investigator: Dennis

Aim of the experiment: Picking from the overnight transformation of ligated P206+P310 product and P312+P311 product in E. coli XL1-Blue from August, the 8th.

Procedure:

  • 5 colonies from P206+P310 transformated cells and 5 colonies from P312+P311 transformated cells were picked.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of colonies of transformation (August 8th)

Investigator: Lara

Aim: Get cells for miniprep for further analytical restriction digest to check whether ligation has worked.

Procedure: Picking of 3 clones each of PCR42/p175, PCR43/p175, PCR56/p175, PCR57/p175, PCR58/p175 into 4 ml LB with Amp and PCR42/p133, PCR43/p133, PCR56/p133, PCR57/p133, PCR58/p133 into 4 ml with Chlp. Inbucation at 37°C (shaker) over night.

SDS-PAGE of crude protein extract after induced expression of PAL, 4CL, CHS, OMT, APT and GFP in yeast

Investigator: Daniela

Aim of the experiment: Getting the right concentration of protein for the western blot.

The preparation of the samples was already described on August, 8th.

  • 12 % gel
  • 6 µl Unstained Protein MW Marker (Thermo Scientific)
  • 12.5 µl sample

TUM12 120809 SDS-PAGE.jpg

Mass of enzymes:

  • PAL = 76.880 kDa
  • 4CL = 61.053 kDa
  • CHS = 42.713 kDa
  • OMT = 39.265 kDa
  • APT = 45.481 kDa

The enzymes of the coumaroyl pathway were not detectable within the other proteins. However the gel looks good, therefore the same concentrations were used for the western blot.

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast

Investigator: Daniela

Aim of the experiment: Detecion of enzymes via Strep-tag

SDS-PAGE:

The supernatant of the lysis reaction (see August, 8th) was diluted 1:10 with ELGA water. The absorption A280 was measured with Nano Drop. The SDS gel should be loaded with 30 µg protein, each assay was filled up with buffer to a total volume of 10 µl. 2.5 µl 5xLaemmlired were added and all assays were denatured at 95 °C for 5 min.

enzyme concentration of 1:10 dilution [mg/ml] (A280) volume of 1:10 dilution with 30 µg protein [µl]
PAL+ 8.585 3.49
PAL- 7.824 3.83
4CL+ 10.218 2.94
CHS+ 12.875 2.33
CHS- 7.245 4.14
OMT+ 8.158 3.68
OMT- 5.002 6
APT 5.15 5.82
GFP 4.805 6.24
  • 12 % gel
  • 120 V, 1.5 h

Blotting:

  • blotting of proteins on a nitrocellulose membrane (Whatman)
  • 50mA, 1 h

Blocking:

  • wash 3x5min with PBS-T0.1
  • the membrane is blocked over night at 4 °C on a shaking device

Retransformations with pSB1C3

Investigator: Roman

Aim of experiment: Aim of the experiment was on the one hand to fill up the stock of usable pSB1C3 for both, the caffeine and the whole team. On the other hand, the experiment was used as a test for previously prepared competent E.Coli cells

Operational sequence: The used vectors for the transformations were pSB1C3 RFC25 (p123), and pSB1C3 containing CHS- from the coumaroyl group (p136).

Transformations:

  • Transformation of (old) chemo competent E.coli cells, used up to now, and the newly prepared with p123
  • Transformation of the new chemo competent E.coli cells with p136 with two slightly different methods:
    • as described in previous protocolls, with an heat shock at 37°C for 5 minutes
    • with an heat shock at 42°C for 30 seconds, followed by an incubation on ice for 30 minutes (before the cells being incubated with LB- medium)

The reaction batches were plated out on chloramphenicol containing LB- agar plates (both, unconcentrated and concentrated, i.e. resuspended in ca. 100 µl LB medium). Plates were incubated over night at 37°C.

Friday, August 10th

Transformation of overnight ligation with TEF1-P, TEF2-P, TEF1-T, ADH1-P, ADH1-T and pTUM104

Investigator: Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of ligation product was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on chloramphenicol, or ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

PCR of TEF1-T and TEF2-P from Saccharomyces cerevisiae genome

Investigator: Georg

Procedure:

  • Reaction batch for PCR:
volume reagent
4,3 µl P237 (Yeast genome)
35 µl 5x One Taq St. Reaction buffer (NEB)
3,5 µl 10 mM dNTPs
3,5 µl O62/10
3,5 µl O63/10
0.875 µl Taq Polym. (NEB)
124,32 µl H20
=175 µl TOTAL

Procedure:

  • Reaction batch for PCR:
volume reagent
4,3 µl P237 (Yeast genome)
35 µl 5x One Taq St. Reaction buffer (NEB)
3,5 µl 10 mM dNTPs
3,5 µl O64/10
3,5 µl O65/10
0.875 µl Taq Polym. (NEB)
124,32 µl H20
=175 µl TOTAL
  • 2x3 PCR reactions were mixed and PCR was run at the following conditions:
  • 30 sec, 94 C Initial Denaturation
  • (30 Cycles) 94 C, 30 sec.
  • (30 Cycles) 57,5, C 30 sec.
  • (30 Cycles) 68 C, 1 min
  • Final extension 68 C, 10 min
  • Hold 4 C

PCR-Purification of TEF1-T and TEF2-P

Investigator: Georg

  • PCR-Purification was accomplished according to Quiaquick PCR-purification protocoll

Analytical gel of purified PCR-Products (TEF1-T and TEF2-P)

20120810 Anal.Gel PCR TEF2p,TEF1t.png

  • PCR was succesfull

Analytical gelelectrophoresis of PCR product of P313 to introduce RFC25 pre- and suffix

Investigator: Roman

Aim of the experiment: Analytical gelelectrophoresis of PCR product of P313 to introduce RFC25 pre- and suffix to see wether the PCR was successful.

Procedure:

  • The PCR product was first purificated with PCR purification kit from Qiagen
  • Analytical gelelectrophoresis was performed at 90 V for ~1 h.
  • PCR was successful!

TUM12 20120810 anal PCR313.jpg (3 µl of PCR solution were analyzed on gel)

Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P206+P310 and ligated P312+P311

Investigator: Dennis, Roman

Aim of the experiment: Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P206+P310 and ligated P312+P311.

Procedure:

  • Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Transformation analysis and preparation of over- night cultures

Investigator:Roman

Aim of the experiment: Analysis of the transformation with old and new chemocompetent E.Coli- cells and preparation of over night (over weekend, respectively) cultures, to amplificate the vector pSB1C3

Results:

  • All plates showed a lot of colonies
  • The concentrated plates were quite overgrown, the unconcentrated ones showed single colonies
  • no difference could be detected between transformation with 42°C heat shock (followed by 30 min incubation on ice, see previous day) and 37°C heat shock

Newly prepared competent cells seem to work, further investigations (e.g. plating out with different antibiotics), see below.

Operational sequence: Liquid cultures of the following transformants were prepared:

  • XL1-blue with p123 (old competent cells used)
  • XL1-blue with p123 (new competent cells used)
  • XL1- blue with p136

To prepare the over night cultures, 4ml of LB medium containing chloramphenicol (4µl) were inoculated with a pipet- tip and incubated at room temperature over the weekend with 180 rpm.

Plating of newly generated chemocompetent cells with different antibiotics

Investigator: Roman

Aim: Test, if prepared competent cells (untransformed) are sensitive to different antibiotics

Operational sequence:

Used antibiotics:

  • ampicillin
  • kanamycin
  • tetracyclin
  • chloramphenicol

100µl of untransformed, melted E.Coli- cells were plated and incubated over the weekend at room temperature. No growth should occure.

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast - continued

Investigator: Daniela

Aim of the experiment: Detecion of enzymes via Strep-tag

Detection:

  • via Streptavidin-AP (1:4000) ->7ml, Streptavidin-AP diluted in PBST0.1
  • 1h incubation, be sure that the whole membrane is covered with Streptavidin-AP solution.

Developing:

  • 15 ml AP-buffer mixed with 45 µl BCIP (50 mg/ml in DMF) and 7.5 µl NBT (75 mg/ml in 70 % DMF)
  • incubation: about 30 min

TUM12 120810WesternBlot.jpg

Expected bands:

PAL: length: 716, mass = 76,880 kDa

4CL: no strep-tag ->negative control (length: 561, mass = 61.053 kDa)

CHS: length: 390, mass = 42.713 kDa

OMT: length: 352, mass = 39.265 kDa

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

Miniprep of transformation august 8th

Investigator: Dennis

Aim: Miniprep of transformation August 8th

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl ddH2O at room temperature, with the columns having been incubated 2 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C


Saturday, August 11th

Repetition of SDS-PAGE and Western Blot of crude protein extract after induced expression of PAL, 4CL, CHS, OMT, APT and GFP in yeast

Investigator: Ingmar

Aim of the experiment: Execute the Western Blot using the StrepMab Classic antibody in order to test whether the immunospecifity is better. Furthermore one of the first SDS-PAGEs was done with an increased protein concentration.

Operational sequence

  • To test wheather the increased protein concentrations lead to overloaded bonds, two SDS-PAGE gels which have been stained with Coomassie brilliant blue afterwards were run parallely to the ones for the Western blots.
  • The preparation of the samples was executed as describes on August, 8th.
  • 12 % SDS-PAGE gel, width of the collection gel: 2 mmm
  • 6 µl Unstained Protein MW Marker (Thermo Scientific) for the staining with Coomassie brilliant blue and 6 µl Prestained Protein MW Marker (Thermo Scientific)for the western blots.
  • 15 µl sample
  • SDS gel with 30 µg protein of each sample:

SDS PAGE of diluted crude cell extracts

Mass of enzymes:

  • PAL = 76.880 kDa
  • 4CL = 61.053 kDa
  • CHS = 42.713 kDa
  • OMT = 39.265 kDa
  • APT = 45.481 kDa
  • SDS gel with maximal protein concentration using 15 µl of the crude cell extract:

SDS PAGE of concentrated crude cell extracts

Mass of enzymes:

  • PAL = 76.880 kDa
  • 4CL = 61.053 kDa
  • CHS = 42.713 kDa
  • OMT = 39.265 kDa
  • APT = 45.481 kDa

The enzymes of the coumaroyl pathway were not detectable within the other proteins. However the gels look good, therefore the same concentrations were used for the western blot.

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast

Investigator: Ingmar

Aim of the experiment: Detecion of enzymes via Strep-tag using Strep MAB classic

SDS-PAGE:

Two separate approaches were executed: First, one Wester Blot was prepared using 30 µg protein of each sample as described by Daniela Dichtler on 09.08.2012. Second, a maximal protein concentration was used by utilizing undiluted crude cell extract. 10 µl of diluted an undiluted cell extract supernatant were mixed with 2.5 µl 5xLaemmlired and incubated at 95 °C for 5 min.

  • 12 % SDS-PAGE gel, width of the collection gel: 2 mmm
  • 6 µl Prestained Protein MW Marker (Thermo Scientific)
  • 12.5 µl sample
  • 90 V as long as the samples cross the collecting gel, afterwards 110 V until the dye is close to the lower end of the gel.

Blotting:

  • blotting of proteins on a nitrocellulose membrane (Whatman) according to the protocol of Nadine Kallweit
  • 50mA per gel, 1 h

Blocking:

  • wash 3x7.5min with PBS-T0.1
  • the membrane is blocked over night at 4 °C on a shaking device with 3 % BSA in PBS-T0.1

Sunday, August 12th

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast - continued

Investigator: Ingmar

Aim of the experiment: Detecion of enzymes via Strep-tag

Detection:

  • wash 3x 7,5 moin with PBS-T0.1
  • 1h incubation with Strep MAB-classic primary antibody (10 ml per gel)
  • wash 3x 7,5 moin with PBS-T0.1
  • 1h incubation with DAKO rabbit anti-mouse secondary antibody wich is conjugated to alkaline peroxidase(10 ml per gel)

Developing:

  • wash 2x 5 min with PBS-T 0.1 and 2x 5 min with PBS. Brandish the membranes afterwards for 2 min in AP-buffer.
  • Add 15 ml AP-buffer mixed with 45 µl BCIP (50 mg/ml in DMF) and 7.5 µl NBT (75 mg/ml in 70 % DMF)
  • Incubation until the bonds become sufficiently visible, here 10-15 min.
  • Western Blot using diluted samples:

Western Blot of diluted crude cell extracts

Expected bands:

PAL: length: 716, mass = 76,880 kDa

4CL: no strep-tag ->negative control (length: 561, mass = 61.053 kDa)

CHS: length: 390, mass = 42.713 kDa

OMT: length: 352, mass = 39.265 kDa

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

  • Western Blot using concentrated samples:

Western Blot of concentrated crude cell extracts

PAL: length: 716, mass = 76,880 kDa

4CL: no strep-tag ->negative control (length: 561, mass = 61.053 kDa)

CHS: length: 390, mass = 42.713 kDa

OMT: length: 352, mass = 39.265 kDa

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

On both gels the desired proteins can not be detected doubtless. Therefore several taks have to be done:

  • Sequencing of the used genconstructs
  • Sample taking after variable time after inducton in order to optimizie the amount of desired protein.
  • Test different blocking techniques for the Western Blot to reduce the background signal.

Week 10

Monday, August 13th

Preparative digestion of PCR-Products TEF2-P and TEF1-T

  • Reaction batch for digestion:
volume reagent
6 µl PstI (NEB)
6 µl XbaI (NEB)
30 µl NEB-4 buffer
3 µl 100 x BSA (NEB)
105 µl dd H20
=150 µl TOTAL
  • To 25 µl mastermix were 25 µl of PCR-product added

Picking of colonies of psb1c3 with TEF1-t, TEF2-P, ADH1-P und ADH1-t, pTUM104

Investigator: Georg

  • no colonies of pYES2-TUM
  • 10 colonies of TEF1-T, TEF2-P, 8 from ADH1-P and ADH1-T

Preparative digestion of pTUM104

Investigator: Georg

    • Reaction batch for digestion:
volume reagent
20 µl pYESII
2 µl SwaI
2 µl PvuII
4 µl NEB-3 buffer
0,4 µl 100 x BSA (NEB)
13,6 µl dd H20
=40µl TOTAL
  • Digestion was started with SwaI and BSA, for 3 hours at room temperature. Afterwards PvuII was added and digestion processed at 37 C

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P310 products (P327-P331)

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P310. P327-P331 (N'-Pif3-20aaLinker-C').

Procedure:

  • Mastermix for analytical digestion with NgoMIV+PstI-HF
volume reagent
12 µl NEBuffer 4 (10x)
1.5 µl NgoMIV
1.5 µl PstI-HF
90 µl ddH2O
=105 µl TOTAL
  • 17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P327, P328, P329, P330, P331.
  • Incubation for 2 h at 37 °C.

Order of gel-pockets:

100 bp ladder DNA ladder P327 (digested with NgoMIV+PstI-HF) P328 (digested with NgoMIV+PstI-HF) P329 (digested with NgoMIV+PstI-HF) P330 (digested with NgoMIV+PstI-HF) P331 (digested with NgoMIV+PstI-HF) P310 control (before ligation and already digested with NgoMIV+PstI-HF) 1 kbp ladder DNA ladder
Ligation/Fusion was successful! Ligation/Fusion was successful! Ligation/Fusion was successful! Ligation/Fusion was successful! Ligation/Fusion was successful! Control OK!

TUM12 20120813 anal gel p327-p331 p310.jpg

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P312+P311 products (P332-P336)

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P310. P327-P331 (N'-20aaLinker-LexA-C').

Procedure:

  • Mastermix for analytical digestion with EcoRI-HF+AgeI-HF
volume reagent
12 µl NEBuffer 4 (10x)
1.2 µl BSA (100x)
1.5 µl EcoRI-HF
1.5 µl AgeI-HF
88.8 µl ddH2O
=105 µl TOTAL
  • 17.5 µl of the mastermix for EcoRI-HF+AgeI-HF was added to 2.5 µl of plasmid DNA of P332, P333, P334, P335, P336.
  • Incubation for 2 h at 37 °C.

Order of gel-pockets:

100 bp ladder DNA ladder P332 (digested with EcoRI-HF+AgeI-HF) P333 (digested with EcoRI-HF+AgeI-HF) P334 (digested with EcoRI-HF+AgeI-HF) P335 (digested with EcoRI-HF+AgeI-HF) P336 (digested with EcoRI-HF+AgeI-HF) P311 control (before ligation and already digested with EcoRI-HF+AgeI-HF) 1 kbp ladder DNA ladder
Ligation/Fusion was successful! Ligation/Fusion was successful! Ligation/Fusion was successful! Ligation/Fusion was successful! Ligation/Fusion was successful! Control OK!

TUM12 20120813 anal gel p332-p336 p311.jpg

Preperative digestion of PCR41 (Pif3 100NT)

Investigator: Jeff

Aim of the experiment: Contruction of N'-SV40NLS-Gal4AD-pGADT7 AD linker-Pif3(100NT)-C'.

Procedure:

  • Reaction batch:
volume reagent
25 µl PCR41
5 µl Buffer G (10x)
2 µl BamHI (10 U/µl)
2 µl MfeI (MunI) (10 U/µl)
16 µl ddH2O
=50 µl TOTAL

Preperative digestion of PCR48 (Gal4DBD)

Investigator: Jeff

Aim of the experiment: To backup amplificated Gal4DBD with RFC25 pre- and suffix in pSB1C3.

Procedure:

  • Reaction batch:
volume reagent
25 µl PCR48
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
17.5 µl ddH2O
=50 µl TOTAL
  • WRONG DIGESTION, THERE IS NO PstI-HF SITE IN THE PCR PRODUCT! IT SHOULD HAVE BEEN XbaI+AgeI-HF

Preperative digestion of PCR65 (PhyB 908NT)

Investigator: Jeff

Aim of the experiment: To backup amplificated PhyB (908NT) with RFC25 pre- and suffix in pSB1C3.

Procedure:

  • Reaction batch:
volume reagent
25 µl PCR65
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
17.5 µl ddH2O
=50 µl TOTAL
  • WRONG DIGESTION, THERE IS NO PstI-HF SITE IN THE PCR PRODUCT! IT SHOULD HAVE BEEN XbaI+AgeI-HF

Preperative digestion of P292

Investigator: Jeff

Aim of the experiment: Only the backbone of this part is needed; this part including LexA is used because to see if the double digest work. If it doesn't work, there won't be 2 DNA strands. Backbone was cut out for ligation with SV40NLS (PCR34).

Procudure:

  • Reaction batch:
volume reagent
20 µl P292
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • WRONG DIGESTION! IT SHOULD HAS BEEN XbaI+AgeI-HF! BUT IT CAN BE USED FOR OTHER PURPOSES

Preperative digestion of P293 (Gal4AD)

Investigator: Jeff

Aim of the experiment: Contruction of N'-SV40NLS-Gal4AD-pGADT7 AD linker-Pif3(100NT)-C'.

Procedure:

  • Reaction batch:
volume reagent
20 µl P293
8 µl Buffer Tango (10x)
4 µl EcoRI (10 U/µl)
2 µl BamHI (10 U/µl)
6 µl ddH2O
=40 µl TOTAL

Preperative gelelectrophoresis of digested PCR41, PCR48, PCR65

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested PCR41, PCR48, PCR65.

Procedure:

  • Preperative gelelectrophoresis was performed at 70 V for 90 min.
  • 5.55 µl of DNA loading buffer (10x) was added to each of the digested PCR products.

Order of gel-pockets:

PCR41 digested MfeI+BamHI 100 bp ladder DNA ladder PCR48 digested with XbaI+PstI-HF 1 kbp ladder DNA ladder PCR65 digested with XbaI+PstI-HF
Okay! Length OK but wrong digestion, should have been XbaI+AgeI-HF Length OK but wrong digestion, should have been XbaI+AgeI-HF

TUM12 20120813 prep gel pcr41 pcr48 pcr65.jpg

Preperative gelelectrophoresis of digested P292 and P293

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested P292 and P293

Procedure:

  • Preperative gelelectrophoresis was performed at 70 V for 90 min.
  • 4.44 µl of DNA loading buffer (10x) was added to each of the digested plasmid products.

Order of gel-pockets:

P292 digested XbaI+PstI-HF 100 bp ladder DNA ladder P293 digested with EcoRII+BamHI 1 kbp ladder DNA ladder
Length OK but wrong digestion, should have been XbaI+AgeI-HF Okay!

TUM12 20120813 prep gel p292 p293.jpg

Ligation of P71+P322

Investigator: Jeff

Aim of the experiment: Ligation of P71+P322.

Procedure:

  • Reaction batch:
volume reagent
4.18 µl P71
3.63 µl P322
2 µl T4 ligase buffer (10x)
0.25 µl T4 ligase (5 U/µl)
9.69 µl ddH2O
=20 µl TOTAL
  • No negative control because there was no sufficient amount of P71 anymore.
  • The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Ligation of P71+P323

Investigator: Jeff

Aim of the experiment: Ligation of P71+P323.

Procedure:

  • Reaction batch:
volume reagent
4.18 µl P71
5.01 µl P323
2 µl T4 ligase buffer (10x)
0.25 µl T4 ligase (5 U/µl)
8.31 µl ddH2O
=20 µl TOTAL
  • No negative control because there was no sufficient amount of P71 anymore.
  • The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Ligation of P206+P337

Investigator: Jeff

Aim of the experiment: Ligation of P206+P337.

Procedure:

  • Reaction batch:
volume reagent
1.69 µl P206
7.62 µl P337
2 µl T4 ligase buffer (10x)
0.25 µl T4 ligase (5 U/µl)
8.19 µl ddH2O
=20 µl TOTAL
  • Negative control was performed with P206 only wihtout insert, i. e. the only difference is that ddH2O was used instead of P337 in the reaction batch.
  • The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Ligation of P342+PCR66

Investigator: Jeff

Aim of the experiment: Ligation of P342+PCR66.

Procedure:

  • Reaction batch:
volume reagent
1.04 µl P342
1.92 µl PCR66
2 µl T4 ligase buffer (10x)
0.25 µl T4 ligase (5 U/µl)
14.54 µl ddH2O
=20 µl TOTAL
  • Negative control was performed with P342 only wihtout insert, i. e. the only difference is that ddH2O was used instead of PCR66 in the reaction batch.
  • The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66.

Procedure:

  • 5 µl of the ligation products (P71+P322, P71+P323, P206+P337 and P342+PCR66) and their negative controls (P206 NK, P324 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on suitable antiotic plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on suitable antbiotic plates.

Quick Change mutagenesis to remove SpeI(at 684 bp) in the 4CL and SpeI (at 470 bp) in CHS

Investigator: Ingmar

Aim of the experiment: Generation of RFC 25 compatible versions of the 4CL and CHS genes. Used plasmids

  • pYes
    • 4Cl+: P193
    • 4CL-: P194
    • CHS+: P195
    • CHS-: P196
  • PSB1C3
    • 4CL+ P185
    • 4CL-: P186
    • CHS+: P135
    • CHS-: P136

PCR
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA
0.5 µl 1:10 dilution of O81 for 4 CL and O83 for CHS (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA
0.5 µl 1:10 dilution of O82 for 4 CL and O84 for CHS (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Analysis of plated, untransformed chemocompetent E.Coli- cells

Investigator: Roman

Aim: To test the prepared chemocompetent E.Coli- cells.

Results:

  • Plate with kanamycin: no colonys (as expected)
  • Plate with ampicillin: no colonys (as expected)
  • Plate with tetracyclin: full (as expected, due to natural resistance)
  • Plate with chloramphenicol: 12 colonies (not expected, should be empty)

The plating on a chloramphenicol containing plate will be repeated, at 37°C over night instead of room temperature over the weekend, because perhaps chloramphenicol is degraded by the bacteria after two days

Small-Scale Yeast Transformation of pTUM104 without insert

Investigator: Katrin, Ingmar

Aim of the experiment:Transformation of P152 (pTUM104 without insert) in Yeast

The protocol on page 13 of the pYES2 manual was used. To ensure a positive result, two transformations were made.

Only modifications are noted:

step 1: inoculate in 4 ml YPD medium

step 2: OD600 = 5,6 -> to determine a OD600 of 0.4 in 50 ml, 3 ml yeast suspension and 50 ml YPD medium were used.

steps 3 and 4: centrifugation for 5 min, 4 °C

step 6:

1 µg plasmid DNA

  • P152: c = 156.8 ng/µl -> 6,4 µl

100 µg denatured sheared salmon sperm: the one from Simon was used -> 10 µl

The cells were plated out on SC-U plates with Glucose and incubated at 30°C

Plasmid isolation of p123 and p136

Investigator: Roman

Aim: Aim of the experiment was the isolation of p123 out of transformed (see friday) XL-1 blue chemo competent e.coli- cells. Old and newly prepared competent cells were used (see friday). Besides, p136 was isolated out of transformed cells, which is pSB1C3 with CHS- inserted. The whole experiment should provide an adequate amount of pSB1C3 backbone for the caffeine team, because we want to insert our three genes in this vector.

Operational Sequence:

The plasmid preparation was performed as described in the manufacturers protocoll (Quiagen Miniprep Kit). Elution was done with 50 µl Elution Buffer in one step. Due to the incubation of the liquid cultures at room temperature over the weekend instead of 37°C over night, the pellet was a bit smaller than usual, resulting in concentrations of only:

  • 51,9 ng/µl (p123, old competent cells used)
  • 57,8 ng/µl (p123, new competent cells used)
  • 59,2 ng/µl (p136)

Restriction digest of p123 and p136 and preparative gel electrophoresis

Investigator: Roman

Aim:

Preparation of Xba1 and Pst1 digested pSB1C3 backbone, to be able to ligate the three caffeine genes into it.

Operational sequence

Reaction batch:

volume reagent
50 µl (ca. 2-3 µg) p123/p136
6 µl 10x Buffer NEB 4
0,6 µl BSA (100x)
2 µl Xba1 RE
2 µl Pst1- HF RE
=60 µl TOTAL

Afterwards, about 6 µl of 10x loading dye were added and the fragments were separated by preparative gel electrophoresis, with the CHS- fragment being about 1300 bp in length.

TUM12 20120813 p123 p136 Xba1Pst1.jpg

From left to right:

DNA- Ladder pSB1C3_Xba1Pst1 pSB1C3_CHS-_Xba1Pst1 DNA- Ladder

Dilution of gen- synthesis products and transformation

Investigator: Roman

Aim:

Dilution of dried pUCIDT- Amp vector, which contains the gene synthesis products. Afterwards, transformation of pUCIDT_CaXMT1, pUCIDT_CaMXMT1 and pUCIDT_CaDXMT1 in chemo competent XL-1 blue e.coli- cells, to make the genes available for cloning in pSB1C3 and pTUM104

Operational sequence

Basical vector data of pUCIDT

  • length: 2752 bp
  • resistance: ampicillin

About 2 µg of dried vector (containing our inserts) were delivered. By dilution with 20 µl bidestillated water (after centrifugation), a final concentration of about 100 ng/µl was adjusted.

Transformation

Transformation in chemo competent cells was performed as previously described. Unconcentrated plating (100 µl) was performed on ampicillin containing LB agar plates, whereas the rest of the transformation- batch was stored in the fridge at 4°C (previous experiments showed, that unconcentrated plating led to enough colonies). The plates were incubated at room temperature over the next two days.

Repetition of plating of newly prepared chemo competent cells

Investigator: Roman

Aim:

Test of newly prepared chemo competet cells, due to present chloramphenicol resistance

Operational sequence

Because 12 colonies were grown on chloramphenicol containing agar plates after incubation at room temperature over the weekend (although "empty" competent XL1- blue cells were used), this plating was repeated and incubation was carried out at 37°C over night.

Preparative restriction digest and gel electrophoresis of the preprothaumatin plasmid and pTUM104

Investigator: Maddin, Aloisius

Aim: Cloning of preprothaumatin on pTUM104

Operational sequence

Preparative restriction digest:

  • 5 µl pYes2; 1 µl XbaI; 1 µl SpeI; 5 µl 10x NEBuffer 4;0,5 µl BSA; 37.5 µl ddH2O; 37 °C, 1 h.
  • 10 µl Preprothaumatinplasmid (gene synthesis!); 1 µl XbaI; 1 µl SpeI; 5 µl 10x NEBuffer 4; 0,5 µl BSA; 32.5 µl ddH2O; 37 °C, 1 h.
  • Preparative gel electrophoresis: expected lengths for pYes2: backbone: 5.8 kb, (insert: 62 bp); expected length for preprothaumtin plasmid: backbone: 2.2 kb, insert: 721 bp.
  • Gel extraction according to QIAqick® Gel Extraction Kit. Not successful, EtOH was forgotten.
  • Transformation of E. coli XL1-Blue with the preprothaumatin plasmid (selection with amp).

Tuesday, August 14th

Analytical digestion of picked colony-DNA with XbaI- + PSTI-HF

Investigator: Georg

Aim of experiment: Find positive clones from transformation with ligation products ADH1-P+psb1c3, ADH1-T+psb1c3,TEF1-t+psb1c3 and TEF1-P+psb1c3

  • Reaction batch for digestion:
volume reagent
5,5 µl PstI-HF (NEB)
5,5 µl XbaI (NEB)
44 µl NEB-4 buffer
4,4 µl 100 x BSA (NEB)
325,6 µl dd H20
=385µl TOTAL
  • to 2,5 ml of DNA 17,5 µl reaction batch were added
  • Digestion took place at 37°C for 1 h

20120814 Anal.Gel Lig. ADH1-p in pSB1C3.png 20120814 Anal.GEl Lig. TEF1-t in psb1c3.png

  • NO TEF1-T as insert but TEF1-P, you probably has mismatched tubes

20120814 Anal.Gel, ADH1 Term lig in pSB1C3.png

  • Ligation was succesful
  • 20120814 TEF2 Prom ligiert in psb1c3 (falsch).png
  • wrong insert

Picking from the overnight transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment: Picking from the overnight transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue.

Procedure:

  • 5 colonies of each transformation from P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR) transformated cells were picked.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics (P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR)). These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Reapeat of transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66 from August, the 13th

Investigator: Jeff

Aim of the experiment: Reapeat of transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66 from August, the 13th. The reason is that the freshly prepared competent cells are contaminated with a foreign plasmid.

Procedure:

  • 5 µl of the ligation products (P71+P322, P71+P323, P206+P337 and P342+PCR66) and their negative controls (P206 NK, P324 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on suitable antiotic plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on suitable antbiotic plates. Accidently, only the pellet of P342+PCR66 and P342 NK was plated.

Analysis of plated XL1-blue chemo competent E.coli (untransformed)

Investigator: Volker

Aim:

Test of prepared chemo competent cells (empty) due to present resistance for chloramphenicol

Results

Again 14 colonies have grown on the plate, after incubating at 37°C over night. One can presume, that the newly prepared competent cells have taken up any plasmid providing chloramphenicol resistance (e.g. pSB1C3), makin them unuseful for our experiments. The uptake probably took place when inoculating the LB medium, one day befor the cells were prepared, because a sample of our old competent cells was used for the inoculation instead of a plated colony of e.coli- XL1-blue.

Analytical restriction digest of ligation products of 10.08. after miniprep

Investigator: Andrea

Aim: Check ligation of PCR 42 and PCR43 (Citrus) & PCR 56, PCR 57 and PCR 58 (Lavendula) into pTUM104 and pSB1C3.

volume reagent
20 µl miniprep products
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl XbaI (20 U/µl)
0.25 µl Pst1-HF (20 U/µl)
=20 µl TOTAL
  • Master-Mix: 7 µl Enzyme, 56 µl NEB-Buffer, 5,6 µl BSA, 414,4 µl ddH2O
  • 2,5 µl DNA added to 17,5 µl Master-Mix
  • Incubation at 37°C for 1,5 h.

Gelelectrophoresis:

14 08 2012 analytgel1 bearbeitet.jpg

14 08 2012 analytgel2 bearbeitet.jpg

14 08 2012 analytgel3 bearbeitet.jpg

  • ligation failed

Preparation of material for protein expression in yeast

Investigator: Ingmar, Katrin

Aim of the experiment:Preparation of media for protein expression in yeast (expression will be done on thursday, august 16th)

  • The following media were made:

SC-U medium (synthetic complete medium, without uracil)

  • 0.67% yeast nitrogen base (without amino acids)
  • 2% carbon source (i.e. glucose or galactose)
  • 0.01% (adenine, arginine, cysteine, leuine, lysine, threonine, tryptophan)
  • 0.005% (aspartic acid, histidine, isoleucine, methionine, phenylalanine, proline, serine, tyrosine, valine)

--> Production:We produced 1l of induction media(containig 2% galactose and 1 l of growth media(containing 2% glucose). A 50ml AS-aliquot and 6.7g Yeast Nitrogen Base were dissolved in 850ml water and autoklaved. Parallely 100 ml solutions with 20 % galactose and galactose respectively were autoclaved and mixed with 900 ml of the other media afterwards.

Breaking buffer

  • 50 mM sodium phosphate buffer, pH 7,5
  • 1 mM EDTA
  • 5% (v/v) glycerol
  • 1 mM PMSF

Minipreparation of the preprothaumatin plasmid (gene synthesis)

Investigator: Martianus, Aloisius

  • p343, p344, p345.

Wednesday, August 15th

Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P71+P322, P71+P323, P206+P337 and P342+PCR66

Investigator: Jeff

Aim of the experiment: Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P71+P292, P71+P293, P206+P337 and P342+PCR66.

Procedure:

  • Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 and P71+P323 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 (P352-P356) and P71+P323 products (P357-P361).

Procedure:

  • Mastermix for analytical digestion with XbaI+PstI-HF
volume reagent
22 µl NEBuffer 4 (10x)
2.2 µl BSA (100x)
2.75 µl XbaI (20 U/µl)
2.75 µl PstI-HF (20 U/µl)
162.8 µl ddH2O
=192.5 µl TOTAL
  • 17.5 µl of the mastermix for XbaI+PstI-HF was added to 2.5 µl of plasmid DNA of P352-P356.
  • Incubation for 2 h at 37 °C.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min.
100 bp ladder DNA ladder P352 P353 P354 P355 P356 P357 P358 P359 P360 P361 1 kbp ladder DNA ladder
Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed
  • Only the linearized backbone (pYES2 new with ~6 kbp) is visible but no inserts were visible.

TUM12 20120815 anal gel 01.jpg

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products (P352-P366).

Procedure:

  • Mastermix for analytical digestion with NgoMIV+PstI-HF
volume reagent
12 µl NEBuffer 4 (10x)
1.5 µl NgoMIV (10 U/µl)
1.5 µl PstI-HF (20 U/µl)
90 µl ddH2O
=105 µl TOTAL
  • 17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P362-P366.
  • Incubation for 2 h at 37 °C.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min.
100 bp ladder DNA ladder P362 P363 P364 P365 P366 1 kbp ladder DNA ladder
Digestion not worked properly? Seems like it was successful but digestion does not work properly. Ligation failed Digestion not worked properly? Seems like it was successful but digestion does not work properly. Ligation failed Digestion not worked properly? Seems like it was successful but digestion does not work properly.
  • For P362, P364 and P366, it seems that the digestion does not work properly, the expected band around 2-2.1 kbp and ~360 bp were only weak.

TUM12 20120815 anal gel 02.jpg

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products (P367-P371).

Procedure:

  • Mastermix for analytical digestion with NdeI+BamHI
volume reagent
24 µl Tango (10x)
6 µl NdeI (10 U/µl)
6 µl BamHI (10 U/µl)
69 µl ddH2O
=105 µl TOTAL
  • 17.5 µl of the mastermix for NdeI+BamHI was added to 2.5 µl of plasmid DNA of P367-P371.
  • Incubation for 2 h at 37 °C.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min.
100 bp ladder DNA ladder P367 P368 P369 P370 P371 1 kbp ladder DNA ladder
Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed
  • Ligation failed, even no Backbone was visible (~8 kbp)!

TUM12 20120815 anal gel 03.jpg

Transformation of E.coli XL1 blue with ligation products

Investigator: Andrea

Aim: Transformation of ligation products PCR42/P133, PCR43/P133, P56/P133, P57/P133, P58/P133, PCR42/P175, P43/P175, P56/P175, P57/P175, P58/P175

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • add 5 µl of ligation product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 45 min
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an antibiotic containing LB-plate (Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133))

Repetition of analytical restriction digest of ligation products of 10.08. after miniprep

Investigator: Andrea

Aim: Check ligation of PCR 42 and PCR43 (Citrus) & PCR 56, PCR 57 and PCR 58 (Lavendula) into pTUM104 and pSB1C3.

volume reagent
20 µl miniprep products
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl XbaI (20 U/µl)
0.25 µl SpeI (20 U/µl)
=20 µl TOTAL
  • Master-Mix: 7 µl Enzyme, 56 µl NEB-Buffer, 5,6 µl BSA, 414,4 µl ddH2O
  • 2,5 µl DNA added to 17,5 µl Master-Mix
  • Incubation at 37°C for 2 h.

Gelelectrophoresis:

15.08.12 analytgel1 bearbeitet.png

15.08.12 analytgel2 bearbeitet.png

15.08.12 analytgel3 bearbeitet.png

  • ligation failed

Picking of colonies of transformation (August 3rd and August 8th)

Investigator: Katrin

Aim: Get cells for miniprep for further analytical restriction digest to check whether ligation has worked.

Procedure:

  • Picking of 10 clones each of PCR42/p175 and PCR56/p175 (Trafo 08.08.)
  • Picking of 3 clones of PCR2/P133 (Trafo 03.08.)
  • Picking of 1 clone of PCR2/P175 (Trafo 03.08.)
  • clones were put into 4 ml LB with Amp (P175) or Chlp (P133)
  • Inbucation at 37°C (shaker) over night.

Preparation of cells for protein expression in yeast

Investigator: Katrin

Aim of the experiment:Picking transformed Saccharomyces cerevisiae cells for protein expression in yeast (expression will be done on Thursday, August 16th)

  • Inocultion of overnight cultures: one clone from each plates with PAL+/-, CHS+/-, 4CL+/-, OMT1+/-, APT, GFP was picked,resuspended in 15 ml SCU medium with glucose and incubated at 30 °C overnight

Thursday, August 16th

Analytical digestion of P307+P309

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
0,5 µl PstI-HF (NEB)
0,5 µl XbaI (NEB)
4µl NEB-4 buffer
0,4 µl 100 x BSA (NEB)
29,6 µl dd H20
=35 µl TOTAL
  • To 17,5 µl reaction mix, 2,5 µl DNA were added
  • Digestion took 1 hour at 37 C

Gelextraction of linear pTUM104

Investigator: Georg

  • Gelextraction was done according to Quiaquick gel extraction kit

Nanodrop for measuring the concentration of P265,264

Investigator: Georg

  • P265 :11,2 ng/µl
  • P264 :12,7 ng/µl
  • P264B:13,8 ng/µl
  • P265B:14,9 ng/µl

Ligation of pTUM104

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
5 µl µl T4-Ligase (1u/µl)
3,36 µl (=50 ng) P265B (PYesII digested)
5 µl 10x T4-ligase buffer
2,5 % 50% PEG 4000
24,14 µl dd H20
=50µl TOTAL
  • Ligation took place at 16 C overnight

Preparative digestion of P 402 + P91

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
2 µl PstI-HF (NEB)
2 µl SpeI-HF (NEB)
8 µl NEB-4 buffer
0,8 µl 100 x BSA (NEB)
27,2 µl dd H20
=40µl TOTAL
  • Digestion was done at 37 C for 3 hours

Ligation of TEF2-P (PCR59) and Cyc1-T P131 with P132

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
2,99 µl (=100 ng) P132
2 µl 10x T4-ligase buffer
8,01 µl PCR59
6,5 µl dd H20
=20µl TOTAL

Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
2,99 µl (=100 ng) P132
2 µl 10x T4-ligase buffer
9,31 µl P131
5,5 µl dd H20
=20µl TOTAL
  • Ligation was done at 16 C overnight

Analytic digestion and gelelectrophoresis of P362, P364 and P366

Investigator: Jeff

Aim of the experiment: Analytic digestion and gelelectrophoresis of P362, P364 and P366 because the analytical digestion from the day before does not work properly.

Procedure:

  • Mastermix for analytical digestion with NgoMIV+PstI-HF
volume reagent
8 µl NEBuffer 4 (10x)
2 µl NgoMIV (10 U/µl)
1 µl PstI-HF (20 U/µl)
59 µl ddH2O
=70 µl TOTAL
  • 17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P362, P364 and P366.
  • Incubation for 90 min at 37 °C.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min.
100 bp ladder DNA ladder P362 P364 P366 1 kbp ladder DNA ladder
Ligation failed Ligation failed Ligation succesfull, but to be sure, sequencing has to be performed!

TUM12 20120816 anal gel 01.jpg

Sequencing of P366

Investigator: Jeff

Aim of the experiment: Succesful fusion of 20aa Linker + Pif3 has to be proven. Sequencing was performed by Eurofins.

Procedure:

  • Preparing sequencing primer VF2 for Eurofins (c=2 pmol/µl)
volume reagent
0.4 µl O68 (100 pmol/µl)
19.6 µl ddH2O
=20 µl (2 pmol/µl TOTAL
  • 15 µl of P366 was pippetted in a new tube for sequencing.
  • Both tubes were sent to Eurofins
  • Sequencing results:
TATAAATAGGCGTATCACGAGGCAGAATTTCAGATAAAAAAAATCCTTAGCTTTCGCTAA
GGATGATTTCTGGAATTCGCGGCCGCTTCTAGATGGCCGGCGCGAGCGGCGCGGGCGGCA
GCGAAGGCGGCGGCAGCGAAGGCGGCACCAGCGGCGCGACCACCGGCATGCCTCTGTTTG
AACTTTTCAGGCTCACCAAAGCTAAGCTTGAATCTGCTCAAGACAGGAACCCTTCTCCAC
CTGTAGATGAAGTTGTGGAGCTGGTGTGGGAAAATGGTCAGATATCAACTCAAAGTCAGT
CAAGTAGATCGAGGAACATTCCTCCACCACAAGCAAACTCTTCAAGAGCTAGAGAGATTG
GAAATGGCTCAAAGACGACTATGGTGGACGAGATCCCTATGTCAGTGCCATCACTAATGA
CGGGTTTGAGTCAAGACGATGACTTTGTTCCATGGTTGAATCATCATACCGGTTAATACT
AGTAGCGGCCGCTGCAGTCCGGCAAAAAAACGGCAAGGTGTCACCACCCTGCCCTTTTTC
TTTAAAACCGAAAAGATTACTTCGCGTTATGCAGGCTTCCTCGCTCACTGACTCGCTGCG
CTCGGTCGTTCGGCTGCGGCGAGCGGTATCAGCTCACTCAAAGGCGGTAATACGGTTATC
CACAGAATCAGGGGATAACGCAGGAAAGAACATGTGAGCAAAAGGCCAGCAAAAGGCCAG
GAACCGTAAAAAGGCCGCGTTGCTGGCGTTTTTCCACAGGCTCCGCCCCCCTGACGAGCA
TCACAAAAATCGACGCTCAAGTCAGAGGTGGCGAAACCCGACAGGACTATAAAGATACCA
GGCGTTTCCCCCTGGAAGCTCCCTCGTGCGCTCTCCTGTTCCGACCCTGTCGCTTACCGG
ATACCTGTCCGCCTTTCTCCCTTCGGGAAGCGTGGCGCTTTCTCATAGCTCACGCTGTAG
GTATCTCAGTTCGGTGTAGGTCG
  • Sequencing is fine!

Preperative digestion of PCR48 (Gal4DBD)

Investigator: Jeff

Aim of the experiment: To backup amplificated Gal4DBD with RFC25 pre- and suffix in pSB1C3.

Procedure:

  • Reaction batch:
volume reagent
17 µl PCR48
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
23.5 µl ddH2O
=50 µl TOTAL

Preperative digestion of PCR65 (PhyB 908NT)

Investigator: Jeff

Aim of the experiment: To backup amplificated PhyB (908NT) with RFC25 pre- and suffix in pSB1C3.

Procedure:

  • Reaction batch:
volume reagent
7 µl PCR65
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
35.5 µl ddH2O
=50 µl TOTAL

Preperative digestion of P231

Investigator: Jeff

Aim of the experiment: Preperative digestion of P231 for ligation to N-terminal SV40 nuclear localization signal. But sequencing result has first to be awaited.

Procedure:

  • Reaction batch:
volume reagent
20 µl P231
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl AgeI(20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL

Preperative digestion of P235

Investigator: Jeff

Aim of the experiment: Preperative digestion of P235 for get the pYES2newMCS backbone for cloning heme oxygenase (HO1) and phycocyanobilin:ferredoxin oxidoreductase (PcyA) into pYES2newMCS.

Procedure:

  • Reaction batch:
volume reagent
20 µl P235
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI(20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL

Preperative gelelectrophoresis of digested PCR48 and PCR65

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested PCR48 and PCR65.

Procedure:

  • Preperative gelelectrophoresis was performed at 70 V for 90 min.
  • 5.55 µl of DNA loading buffer (10x) was added to each of the digested plasmid products.

Order of gel-pockets:

100 bp ladder DNA ladder PCR48 digested XbaI+AgeI-HF PCR65 digested with XbaI+AgeI-HF 1 kbp ladder DNA ladder
Length OK! Length OK!

TUM12 20120816 prep gel pcr48 pcr65.jpg

Preperative gelelectrophoresis of digested P231 and P235

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested P231 and P235

Procedure:

  • Preperative gelelectrophoresis was performed at 70 V for 90 min.
  • 4.44 µl of DNA loading buffer (10x) was added to each of the digested plasmid products.

Order of gel-pockets:

P231 digested XbaI+AgeI-HF 100 bp ladder DNA ladder P235 digested with XbaI+AgeI-HF 1 kbp ladder DNA ladder
Length OK! Length OK!
  • From digested P235 only the backbone was cut out for further ligations.

TUM12 20120816 prep gel p231 p235.jpg

PCR amplification of a fragment of P313 to introduce RFC25 pre- and suffix

Investigator: Jeff

Aim of experiment: Amplification of wanted fragment of P313 (PhyB 908-NT) to introduce RFC25 pre- and suffix.

Operational Sequence:

  • 2 tubes were prepared
  • PCR reaction batch was prepared as follows:
substrate volume in µl
ddH2O 35.75
One Taq Standard Reaction Buffer (5x) 10
Plasmid template (P313) 1
Primer O70 (10 µM) 1
Primer O72 (10 µM) 1
dNTP (10 mM) 1
Polymerase One Taq 0.25

PCR temperature program:

  • initial heating: 94°C for 30s
  • 30 cycles
  • denaturation: 94°C for 30s
  • annealing: 67°C for 60s
  • elongation: 68°C for 3 min
  • final elongation: 68°C for 5 min
  • 4°C

Afterwards, the PCR reaction products were cleaned with the Qiagen's PCR purification kit after manufacturer's protocol and were stored over night in the fridge at 4 °C

Miniprep of the 10 h culture of transformated E. coli XL1-Blue with with ligated P71+P322, P71+P323, P206+P337 and P342+PCR66

Investigator: Jeff

Aim of the experiment: Miniprep of the 10 h culture of transformated E. coli XL1-Blue with with ligated P71+P292, P71+P293, P206+P337 and P342+PCR66.

Procedure:

  • Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Ligation of P207+PCR69

Investigator: Jeff

Aim of the experiment: Ligation of P207+PCR69 to backup Gal4DBD with RFC25 pre- ans suffix on pSB1C3.

Procedure:

  • Reaction batch:
volume reagent
1.41 µl P207
7.19 µl PCR69
2 µl T4 ligase buffer (10x)
0.25 µl T4 ligase (5 U/µl)
9.15 µl ddH2O
=20 µl TOTAL
  • Negative control was performed with P207 only wihtout insert, i. e. the only difference is that ddH2O was used instead of PCR69 in the reaction batch.
  • The ligation was performed at 16 °C overnight.

Ligation of P207+PCR70

Investigator: Jeff

Aim of the experiment: Ligation of P207+PCR70 to backup PhyB(908 NT) with RFC25 pre- ans suffix on pSB1C3.

Procedure:

  • Reaction batch:
volume reagent
1.12 µl P207
16.38 µl PCR70
2 µl T4 ligase buffer (10x)
0.25 µl T4 ligase (5 U/µl)
=20 µl TOTAL
  • Negative control was performed with P207 only wihtout insert, i. e. the only difference is that ddH2O was used instead of PCR70 in the reaction batch.
  • The ligation was performed at 16 °C overnight.

Picking from the transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue from Tuesday, the 14th

Investigator: Jeff

Aim of the experiment: Picking from the transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue from Tuesday, the 14th because the same transformation the day before failed because the competent cells were contaminated, e. g. they already carries a plasmid.

Procedure:

  • 5 colonies of each transformation from P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR) transformated cells were picked from the transformation from Tuesday, the 14th.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics (P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR)). These tubes were put 10 h in a 180 rpm cell culture shaker at 37 °C.

Induction, Incubation and cell disruption of S.c. containing PAL+/-, 4Cl+, CHS+/-, OMT+/-, APT and GFP

Investigator: Ingmar, Katrin

Aim of the experiment: Take samples at variable times after induction and disrupt the cells in order to optimize the amount of desired protein. Procedure:

  • at 13:30h the overnight culture was diluted in 50 ml SC-U medium conataining 2 % galactose until an OD600 of 0.4.
  • beginning 4h after induction every 3 h samples were taken and cells were disrupted according to "Expression in Saccharomyces cerevisiae" of Huang FC, Studart-Witkowski C & Schwab W 2010. The supernatant of the disrupted cells were used for protein concentration appreciation using the nanodrop photometer. Afterwards they were stored at -80°C.

Gel extraction of p123 and p136

Investigator: Roman

Aim:

Extraction of pSB1C3 (digested with Xba1 and Pst1, = p123 and p136; digest was made on Monday) out of agarose gel.

Operational Sequence

Gel extraction was performed as described the manufacturers protocol (Quiagen). However, the determined concentrations (NanoDrop) were quite low:

  • 8 ng/µl for p123 (Xba/Pst1)
  • 11 ng/µl for p136 (Xba1/Pst1)

This results in a yield of only about 20% (original concentrations were between 50 and 60 ng/µl) Thus, a new over night culture was prepared (see below) to gain a higher initial concentration of plasmid DNA. The next gel extraction will be performed with bidestillated water (instead of elution buffer EB), temperated at 50°C.

Restriction digest of p373 (pTUM104 new MCS RFC25)

Investigator: Roman

Aim:

Restriction digest of pTUM104 with Xba1 and Pst1-HF to be able to clone the caffeine genes into.

Operational Sequence

Reaction batch:

volume reagent
4µl NEBuffer 4 (10x)
0,4µl BSA (100x)
2µl XbaI (20 U/µl)
2µl PstI-HF (20 U/µl)
11,6µl ddH2O
=40µl TOTAL

The reaction batch was incubated for 2.5h at 37°C.

Picture:

TUM12 20120816 pYES2newXba1Pst1.jpg

From left to right:

DNA- Ladder pTUM104_Xba1Pst1

Picking of transformed E.coli- XL1-blue cells and preparation of liquid cultures

Investigator: Roman

Aim:

Preparation of liquid over night cultures of the following transformants:

Operational sequence:

  • pUCIDT_CaXMT1
  • pUCIDT_CaMXMT1
  • pUCIDT_CaDXMT1
  • pSB1C3_CHS- (=p136)

Two colonies of each plate were picked and used for inoculation of 6ml LB medium, containing the respective antibiotic (ampicillin or chloramphenicol). The tubes were incubated at 37°C over night.

Gel extraction of p373 (=pTUM104)

Investigator: Roman

Aim:

Extraction of Xba1 and Pst1 digested pTUM104 out of agarose gel, to make it ready for ligation

Operational sequence:

Gel extraction was performed as described in the manufacturers protocoll. However, bidestillated water was used for elution (30µl). Besides, the water was heated up to 37°C and also the 5 minutes of incubation (before final centrifugation) was done on the heating block at 37°C.

NanoDrop

Concentration of the extracted plasmid was determined with NanoDrop and resulted in a concentration of 75,9 ng/µl. As of now, all elution steps in gel extraction procedures will be performed at these conditions.

PCR of C-LS3 (BBa_I742111, Trafo 19.6)

Investigator: Andrea

Aim: To get more PCR product in case another preparative digest is needed.

Primer with consensus sequence

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer O27
1 µl 10 µM Reverse Primer O30
0.25 µl OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl Plasmid DNA (BBa_I742111) Clone 3
35.75 µl dd water
50 µL TOTAL

Primer without consensus sequence

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer O28
1 µl 10 µM Reverse Primer O30
0.25 µl OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl Plasmid DNA (BBa_I742111) Clone 3
35.75 µl dd water
50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
47 °C 30 s
68 °C 1,75 min
Final extension 68 °C 5 min
Hold 4 °C 1 h
  • 1: Primer O27 / O30
  • 2: Primer O28 / O30

PCR of Schwab plasmid Quickchange-DNA to amplify gene for lavendula LS

Instructor: Andrea

Aim: PCR of Schwab plasmids after Quickchange-Mutagenesis with primers which were designed to amplify the lavendula LS gene and to add RFC25 restriction sites.

3 different primer combinations were used:

1. O33/O37

2. O34/O37

3. O35/O37

Each primer combination was used for plasmid DNA amplification of P283.

PCR reaction mixture

volume reagent
10 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
1 µl 10 µM Forward Primer
1 µl 10 µM Reverse Primer
0.25 µl OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
3 µl Plasmid DNA P283
33.75 µl dd water
50 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
50 °C 30 s
68 °C 1,75 min
Final extension 68 °C 5 min
Hold 4 °C 1 h
  • 3: Primer O33/O37
  • 4: Primer O34/O37
  • 5: Primer O35/O37

Miniprep of pTUM104 clones picked on August 15th

Investigator: Andrea

Aim: Get transformed plasmids for further ligations.

Procedure: Miniprep was done using Qiagen miniprep kit.

  • concentrations: see "Inventarliste"

Miniprep of ligation products of transformation from August 3rd and August 8th

Investigator: Andrea

Aim: Get transformed plasmids for further analytical restriction digest to check whether ligation worked.

Procedure: Miniprep was done using Qiagen miniprep kit.

  • 1: 84 ng/µl
  • 2: 75 ng/µl
  • 3: 115 ng/µl
  • 4: 107 ng/µl
  • 5: 97 ng/µl
  • 6: 112 ng/µl
  • 7: 63 ng/µl
  • 8: 53 ng/µl
  • 9: 87 ng/µl
  • 10: 107 ng/µl
  • 11: 92 ng/µl
  • 12: 48 ng/µl
  • 13: 107 ng/µl
  • 14: 105 ng/µl
  • 15: 118 ng/µl
  • 16: 106 ng/µl
  • 17: 80 ng/µl
  • 18: 84 ng/µl
  • 19: 90 ng/µl
  • 20: 97 ng/µl
  • 21: 250 ng/µl
  • 22: 60 ng/µl
  • 23: 41 ng/µl
  • 24: 275 ng/µl

Eppis containing miniprep products were stored in an disposal bag at the upper drawer of -20°C. --> will be thrown away in case ligation hasn't worked.

Preparative restriction digest of PCR 56,57,58 (lavendula LS) and PCR 42,43 (citrus LS)

Investigator: Andrea

Aim: Prepare digested PCR fragments for further ligation into pTUM104 and pSB1C3.

volume reagent
25 µl PCR products
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
17.5 µl ddH2O
=50 µl TOTAL
  • A mastermix for 6 reactions was produced (30µl NEB-Buffer, 3µl BSA, 6µl per enzyme, 105µl ddH2O).
  • PCR products were digested at 37 °C for 3 hours.

P187 was used as positive control for restriction digest (XbaI and AgeI).

Before Gelelectrophoresis Dephosphorylation of several fragments was done (see next part) !

Gelelectrophoresis:

Limonensynthase: 1600 bp

16.08.12 prepgel1 bearbeitet.png 16.08.12 prepgel4 bearbeitet.png

Digested PCR products (still in gel) are stored in an disposal bag at the upper drawer of -20°C.

Dephosphorylation of digested PCR 42, PCR 43, PCR 56, PCR 57 and PCR 58

Investigator: Andrea

Aim: Dephosphorylation of digested PCR products to avoid religation of the insert and enhance ligation rate.

  • Befor Dephosphorylation procedure can be performed, the PCR Purification Kit of Qiagen needs to be used for purifying the digest solution (for removing enymes and buffer) !!!

Procedure: Use of SAP from Fermentas

  • fill up the 50 µl digest solution to 60 µl with ddH20 (10 µl ddH2O were added)
  • add each 6µl SAP-Buffer and 1 µl SAP
  • mix
  • incubate at 37°C for 30 min
  • inactivation at 65°C for 15 min

Preparative restriction digest of P343, P344, P345, P152 (pTUM104) and P286 (pSB1C3)

Investigator: Andrea

Aim: Prepare digested Preprothaumatin plasmids for further ligation into pTUM104 and pSB1C3.

volume reagent
20 µl PCR products
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • A mastermix for 6 reactions was produced (24µl NEB-Buffer, 2.4µl BSA, 6µl per enzyme, 81.6µl ddH2O).
  • plasmids were digested at 37 °C for 3 hours.

P187 was used as positive control for restriction digest (XbaI and AgeI).

Before Gelelectrophoresis Dephosphorylation of vectors (pTUM104 and pSB1C3) was done (see next part) !

Gelelectrophoresis:

16.08.12 prepgel2 bearbeitet.png 16.08.12 prepgel3 bearbeitet.png

pSB1C3 digested with XbaI and AgeI was lost during gelelectrophoresis

Digested PCR products (still in gel) are stored in an disposal bag at the upper drawer of -20°C.

Dephosphorylation of digested pSB1C3 and pTUM104 (with XbaI and SpeI)

Investigator: Andrea

Aim: Dephosphorylation of digested vectors to avoid religation and enhance ligation rate.

  • Befor Dephosphorylation procedure can be performed, the PCR Purification Kit of Qiagen needs to be used for purifying the digest solution (for removing enymes and buffer) !!!

Procedure: Use of SAP from Fermentas

  • fill up the 50 µl digest solution to 60 µl with ddH20 (10 µl ddH2O were added)
  • add each 6µl SAP-Buffer and 3 µl SAP
  • mix
  • incubate at 37°C for 30 min
  • inactivation at 65°C for 15 min

Friday, August 17th

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 and P71+P323 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 (P379-P383) and P71+P323 products (P384-P388).

Procedure:

  • Mastermix for analytical digestion with XbaI+PstI-HF
volume reagent
22 µl NEBuffer 4 (10x)
2.2 µl BSA (100x)
2.75 µl XbaI (20 U/µl)
2.75 µl PstI-HF (20 U/µl)
162.8 µl ddH2O
=192.5 µl TOTAL
  • 17.5 µl of the mastermix for XbaI+PstI-HF was added to 2.5 µl of plasmid DNA of P379-P388 in an ERG.
  • Incubation for 2 h at 37 °C.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min.
100 bp ladder DNA ladder P379 P380 P381 P382 P383 P384 P385 P386 P387 P388 1 kbp ladder DNA ladder
Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed
  • Only the linearized backbone (pYES2 new with ~6 kbp) is visible but no inserts were visible.

TUM12 20120817 anal gel 01.jpg

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products (P389-P393).

Procedure:

  • Mastermix for analytical digestion with NgoMIV+PstI-HF
volume reagent
12 µl NEBuffer 4 (10x)
1.5 µl NgoMIV (10 U/µl)
1.5 µl PstI-HF (20 U/µl)
90 µl ddH2O
=105 µl TOTAL
  • 17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P389-P393 in an ERG.
  • Incubation for 2 h at 37 °C.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min.
100 bp ladder DNA ladder P389 P390 P391 P392 P393 1 kbp ladder DNA ladder
Ligation failed Ligation successful! Ligation successful! Ligation failed Ligation failed
  • Succesful ligation for P390 and P391. 20aaLinker-PIF3 ready for further fusion!

TUM12 20120817 anal gel 02.jpg

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products (P394-P398).

Procedure:

  • Mastermix for analytical digestion with NdeI+BamHI
volume reagent
24 µl Tango (10x)
6 µl NdeI (10 U/µl)
6 µl BamHI (10 U/µl)
69 µl ddH2O
=105 µl TOTAL
  • 17.5 µl of the mastermix for NdeI+BamHI was added to 2.5 µl of plasmid DNA of P394-P398.
  • Incubation for 2 h at 37 °C.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min.
100 bp ladder DNA ladder P394 P395 P396 P397 P398 1 kbp ladder DNA ladder
Ligation failed Ligation successful! Ligation successful! Ligation successful! Ligation successful!
  • Ligation for P395-P398! These construct is finished (N'SV40NLS-Gal4AD-Linker-Pif3-C')! Only the RFC10 pre- and suffixes are missing. Next step for this fusion construct is to introduce RFC10 pre- and suffix and ligate it to pSB1C3 and pYES2new for expression. And sequencing has to be done!

TUM12 20120817 anal gel 03.jpg

Transformation of E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70.

Procedure:

  • 5 µl of the ligation products (P207+PCR69 and P207+PCR70) and their negative controls (P206 NK (PCR69), P206 NK (PCR70)) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Transformation of E.coli Xl1-Blue with ligation of TEF2-p, CYC1-t with psb1c3 and pTUM104 selfligation

Investigator: Georg

  • 5 µl of each ligation reaction were transferred to 100 µl of competent cells.
  • Cells were kept on ice for 30 min.
  • Cells were heatshocked for 5 min. at 37 C
  • Cells were incubated for 45 min. at 37 C
  • Cells that were transformed with psb1c3 ligation product were transferred on Agarplates with Chla. Cells with *pYesII ligation product were palste on Amp Agar plates.

Preparation of probes for sequencing

Investigator: Georg

For sequencing of ligation product of Tef1-p, ADH1-p, Tef1-t and ADH1-t, with vector psb1c3 ligation products were diluted on a concentration between 50 ng/µl and 100 ng/µl at a min. volume of 15 µl. Sequencing primers were diluted to 2 µM at an min. volume of 15 µl

  • ADH1-P (188 ng/µl):2 = 7,5 µl (P401) + 7,5 µl H20
  • ADH-T (153,5 ng :2 = 7,5 µl + 7,5 µl H20
  • TEF1-P (207,8 ng/µl) :3 = 5 µl + 10 µl H20
  • Tef1-T (202,2 ng/µl) :3 = 5 µl + 10 µl H20
  • TEF2 (PCR-Product) (12,3 ng/µl)= 6,1 µl (TEF2-p) + 8,9 µl H20 = 5 ng/µl

Sequencing primer: VF2 for ADH1-p, ADH1-t, TEF1-p, TEF1-t. VR for ADH1-p rv. TEF2p_fw for TEF2-p

Quick Change mutagenesis to remove EcoRI(at 310 bp) in the 4CL

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the 4CL gene.

PCR
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA
0.5 µl 1:10 dilution of O79 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA
0.5 µl 1:10 dilution of O80 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Gel extraction of digested PCR products

Investigator: Lara

Aim: Extract digested PCR products for further ligation.

Due to previous phosphatase treatment (and presumably application of only 20 µl on the preparative gel), concentrations of products were very low:

  • PCR 42: 10 ng/µl
  • PCR 43: 10 ng/µl
  • PCR 56: 10 ng/µl
  • PCR 57: 13 ng/µl
  • PCR 58: 14 ng/µl

Digested products are stored in a disposal bag at the upper drawer of -20°C (label: Andrea, miniprep 16.8.)

Ligation of PCR 42, 43, 56, 57 and 58 with pTUM104 (p175) and pSB1C3 (p133)

Investigator: Lara

Aim: Ligate both lavendula and citrus limonene synthase (with all primer combinations -> with or without consensus sequence) with pSB1C3 and pTUM104.

Procedure

PCR 42 in pYES (p175)

Substance Volume
P175 0.5 µl (~50 ng vector dna)
PCR 42 8 µl (~6x of n(vector))
T4 ligase 0.25 
T4 ligase buffer 1 µl
ddH2O 0.25 µl
TOTAL =10 µl

PCR 42 in pSB1C3 (p133)

Substance Volume
P133 1.2 µl (~50 ng vector dna)
PCR 42 20 µl (~6x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2.5 µl
TOTAL =24.2 µl

PCR 43 in pYES (p175)

Substance Volume
P175 0.5 µl (~50 ng vector dna)
PCR 43 8 µl (~6x of n(vector))
T4 ligase 0.25 
T4 ligase buffer 1 µl
ddH2O 0.25 µl
TOTAL =10 µl

PCR 43 in pSB1C3 (p133)

Substance Volume
P133 1.2 µl (~50 ng vector dna)
PCR 43 20 µl (~6x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2.5 µl
TOTAL =24.2 µl

PCR 56 in pYES (p175)

Substance Volume
P175 0.5 µl (~50 ng vector dna)
PCR 56 8 µl (~6x of n(vector))
T4 ligase 0.25 
T4 ligase buffer 1 µl
ddH2O 0.25 µl
TOTAL =10 µl

PCR 42 in pSB1C3 (p133)

Substance Volume
P133 1.2 µl (~50 ng vector dna)
PCR 56 20 µl (~6x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2.5 µl
TOTAL =24.2 µl

PCR 57 in pYES (p175)

Substance Volume
P175 0.5 µl (~50 ng vector dna)
PCR 57 6.5 µl (~6x of n(vector))
T4 ligase 0.25 
T4 ligase buffer 1 µl
ddH2O 1.75 µl
TOTAL =10 µl

PCR 57 in pSB1C3 (p133)

Substance Volume
P133 1.2 µl (~50 ng vector dna)
PCR 57 18 µl (~6x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2.5 µl
TOTAL =22.2 µl

PCR 58 in pYES (p175)

Substance Volume
P175 0.5 µl (~50 ng vector dna)
PCR 58 6.0 µl (~6x of n(vector))
T4 ligase 0.25 
T4 ligase buffer 1 µl
ddH2O 2.25 µl
TOTAL =10 µl

PCR 58 in pSB1C3 (p133)

Substance Volume
P133 1.2 µl (~50 ng vector dna)
PCR 58 16.5 µl (~6x of n(vector))
T4 ligase 0.5 
T4 ligase buffer 2.5 µl
TOTAL =20.7 µl

Negative control/pYES (p175)

Substance Volume
P175 0,5 µl (~50 ng vector dna)
T4 ligase 0.25 
T4 ligase buffer 1 µl
ddH2O 8.25 µl
TOTAL =10 µl

Negative control/pSB1C3 (p133)

Substance Volume
P133 1.2 µl (~50 ng vector dna)
T4 ligase 0.5 
T4 ligase buffer 2.5 µl
TOTAL =25 µl
  • ligation for 2 h at room temperature.
  • 5 µl of ligation product was transformed. The remaining products were incubated at 16 °C (waterbath) for the weekend.

Gel extraction of digested product

Investigator: Lara

Aim: Extract digested prepro-thaumatin for further ligation.

Due to previous phosphatase treatment (and presumably application of only 20 µl on the preparative gel), concentrations of products were very low:

  • P343: 5 ng/µl
  • P344: 5 ng/µl
  • P345: 5 ng/µl
  • pSB1C3: 9 ng/µl
  • pYES: 7 ng/µl

Digested products are stored in a disposal bag at the upper drawer of -20°C (label: Andrea, miniprep 16.8.)

Analytical restriction digest of miniprep (miniprep 16.8., ligations 31.7. and 7.8.)

Investigators: Katrin (digest), Lara (gelelectrophoresis)

Aim: Check whether ligations have worked (transformation products of 3.8. (ligation 31.7.) & 8.8. (ligation 7.8.))

volume reagent
3 µl plasmid DNA
0.5 µl Not 1
2 µl Puffer O (Fermentas)
14.5 µl ddH2O

Gelelectrophoresis:

Gel1: Gene Ruler 1kb, 1, 2, 3, 4, 5, 6, 7, 8, 9

Gel2: Gene Ruler 1kb, 10, 11, 12, 13, 14, 15, 16, 17

Gel3: Gene Ruler 1kb, 18, 19, 20, 21, 22, 23, 24

TUM12 LS analytgel1 1708.png TUM12 LS analytgel2 1708.png TUM12 LS analytgel3 1708.png

Transformation of ligation products

Investigator: Lara

Aim: Transform E.coli XL 1 blue with ligation products (PCR42/p133, PCR42/p175, PCR43/p133, PCR43/p175, PCR56/p133, PCR56/p175, PCR57/p133, PCR57/p175, PCR58/p133, PCR58/p175) to produce colonies containing plasmid DNA.

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • adding of 5 µl of ligation products
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
  • plating of 100 µl of the cells on an Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133)
  • sedimentation of the leftover in a centrifuge (60 sec, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Isolation of of plasmids pUCIDT_Insert and pSB1C3

Investigator: Roman

Aim: Isolation of plasmids pUCIDt_CaXMT1, pUCIDT_CaMXMt1, pUCIDT_CaDXMT1 and pSB1C3_CHS- out of 6 ml of an over night culture (2-fold batch for each plasmid)

Operational sequence:

Plasmids were isolated as described in the manufacturers protocoll (Quiagen). Elution was performed with 50µl buffer EB in one step.

Determined concentrations:

  • pUCIDT_CaXMT1 A: 170 ng/µl
  • pUCIDT_CaXMT1 B: 156 ng/µl
  • pUCIDT_CaXMT1 A: 144 ng/µl
  • pUCIDT_CaXMT1 B: 143 ng/µl
  • pUCIDT_CaXMT1 A: 128 ng/µl
  • pUCIDT_CaXMT1 B: 100 ng/µl
  • pSB1C3_CHS- A: 73 ng/µl
  • psb1C3_CHS- B: 108 ng/µl

Restriction digest of isolated plasmids

Investigator: Roman

Aim: Digest of plasmids with Xba1 and Pst1 to gain the caffeine- synthesis genes and pSB1C3 backbone, respectively.

Operational Sequence:

For restriction digest, the isolated plasmids pUCIDT_CaXMT1A, pUCIDT_CaMXMT1A, pUCIDT_CaDMT1A and pSB1C3_CHS-B were used (highest concentrations).

Reaction batch:

reagent volume
ddH2O 13,6 µl
Plasmid-DNA 20 µl
Enzyme Pst1HF 1 µl
Enzyme Xba1 1 µl
10x NEB Buffer 4 4 µl
BSA 100x 0,4 µl
TOTAL 40 µl

The reaction batch was incubated at 37°C für 1.5 h. Afterwards, the fragments were seperated by preparative agarose gel electrophoresis (see picture below).

Gel- picture 1:

TUM12 20120817 pUCIDT InsertsAuB.jpg

From left to right:

DNA- Ladder pUCIDT_CaXMT1_Xba1Pst1 pUCIDT_CaMXMT1_Xba1Pst1 pUCIDT_CaXMT1_uncut

Gel- picture 2:

20120817 pUCIDT InsertCundpSB1C3(p136).jpg

From left to right:

DNA- Ladder pUCIDT_CaDXMT1_Xba1Pst1 pSB1C3_CHS-_Xba1Pst1 pSB1C3_CHS-_uncut

Gel extraction and NanoDrop determination of separated DNA fragments

Investigator: Roman

Aim: Extraction of DNA fragments and determination of concentration previously to the ligation

Operational sequence: The extraction was performed as described in the manufacturers protocoll (Quiagen). Elution was performed with 30µl water (bidestillated) instead of elution buffer. Furthermore, the water has been heated up to 50°C and also the incubation before final centrifugation was performed on the heating block at 50°C.

NanoDrop determination

  • CaXMT1: 21,4 ng/µl
  • CaMXMT1: 15,1 ng/µl
  • CaDMT1: 20,6 ng/µl
  • pSB1C3: 20 ng/µl

(all digested with Xba1 and Pst1)

Ligation of genes envolved in caffeine synthesis into pTUM104

Investigator: Roman

Aim: Ligation of the genes, which are responsible for caffeine synthesis, into pTUM104 (for further expression studies) and pSB1C3 (to create BioBricks).

Operational Sequence:

The following reaction batch refers to a molar ratio of 1:3 between vector and insert.

Reaction batch:

reagent volume
pTUM104 1,5 µl (ca. 120 ng)
InsertA: CaXMT1 3,5 µl (ca. 70 ng)
InsertB: CaMXMT1 5 µl (ca. 70 ng)
InsertC: CaDXMT1 3,5 µl (ca. 70 ng)
Ligase 1 µl
10x Ligase Buffer 2 µl
ddH2O ad 20 µl

The batch was incubated over the weekend at 16°C in the water bath.

Saturday, August 18th

Picking of plated transformated E. coli XL1-Blue colonies with ligated P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Picking of plated E. coli XL1-Blue colonies, transformed with ligated P207+PCR69 and P207+PCR70 on August, the 17th.

Procedure:

  • 10 colonies of each transformation from P207+PCR69 (CamR) and P207+PCR70 (CamR) transformated cells were picked.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put 10 h in a 180 rpm cell culture shaker at 37 °C.

Colony PCR of clones of PCR58/p133 (transformation 17.8.)

Investigator: Lara

Aim: Introduce new method to allow for higher throughput of clone screenings.

  • make sure you have PCR tubes and cell culture tubes labeled sufficiently. you need to have one pcr tube and one cell culture tube for each colony.
  • pick a colony with a sterile toothpick or pipet tip, smear some of the cells onto the wall of the pcr tube (a bit of pressure and smearing) and subsequently put the toothpick into a cell culture tube with LB-medium and antibiotic.

19 Clones of PCR58/p133 (transformation of August 17th) were picked + 1 clone of 4CL+(PCR15)/p132 as positive control

volume reagent
2 µl 5x OneTaq Standard Reaction Buffer
1 µl 10 mM dNTPs
0.15 µl 40 µM O68
0.15 µl 40 µM O69
0.1 µl OneTaq Hot Start DNA Polymerase
1 µl Plasmid DNA (BBa_I742111) Clone 3
5.6 µl dd water
10 µL TOTAL
  • The PCR program was performed after following scheme:
Initial denaturation 95 °C 6 min
35 cycles 95 °C 30 s
53 °C 30 s
72 °C 1.75 min
Final extension 72 °C 10 min
Hold 4 °C 1 h

TUM12 LS analytcolonyPCR1.png TUM12 LS analytcolonyPCR2.png

  • Colony PCR failed (and/or failed ligation, in case "negative" positive control was picked)

Analytical restriction digest of different clones

Investigator: Lara

Aim: Repetition of analytical digestion of products of miniprep on August 16th (clone 6,11,24) and August 10th (PCR56/p175 clone 1; PCR56/p175 clone 3; PCR57/p175 clone 2, PCR58/p175 clone 1)

volume reagent
5 µl plasmid DNA
0.3 µl Xba1
0.3 µl Spe1
2 µl NEBuffer 4
0.2 µl BSA (100x)
12.2 µl ddH2O
  • Incubation for 1 h at 37°C.

TUM12 LS analytgel 1808.png

Sunday, August 19th

Miniprep of the overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Miniprep of the overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR69 and P207+PCR70.

Procedure:

  • Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70.

Procedure:

  • Mastermix for analytical digestion with XbaI+AgeI-HF:
volume reagent
42 µl NEBuffer 4 (10x)
4.2 µl BSA (100x)
5.25 µl XbaI (20 U/µl)
5.25 µl AgeI-HF (20 U/µl)
310.8 µl ddH2O
=367.5 µl TOTAL
  • 17.5 µl of the mastermix for XbaI+AgeI-HF was added to 2.5 µl of prepped plasmid DNA of P408-P427.
  • Analytical gelelectrophoresis was performed at 90 V for 1 h.
100 bp ladder DNA ladder P408 P409 P410 P411 P412 P413 P414 P415 P416 P417 1 kbp ladder DNA ladder
Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion! Ligation successful! Gal4DBD ready for protein fusion!

TUM12 20120819 anal gel 01.jpg

100 bp ladder DNA ladder P418 P419 P420 P421 P422 P423 P424 P425 P426 P427 1 kbp ladder DNA ladder
Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation successful! PhyB(908-NT) ready for protein fusion! Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation failed!

TUM12 20120819 anal gel 02.jpg

Picking Clones for Ingmar and Roman

Investigator: Volker

4 Clones for each plate were picked in apropiate media at 1.40 AM => please do not prep before 12 AM!
Eight of them are in the 30° incubator on the right side. If you read this at the right time please put them into the 37°C incubator if there is not some space and prep them in the second round. Thanks!

  • From Ingmas plates p187, p196 and p193 no clones could be picked because there were no single colonies
  • on all positive plates there was a sufficient number of clones (50-300)
  • Romans negative controle plates had no (Bneg) and 6 (Yneg) clones which is good / acceptable
  • on all positive plates there was a sufficient number of clons (30-200)

Week 11

Monday, August 20th

Preperative digestion and gelelectrophoresis of P422, P331, P417, P290

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P422 (AgeI+PstI-HF), P331 (NgoMIV+PstI-HF), P417 (NgoMIV+PstI-HF), P290 (XbaI+PstI).

Procedure:

  • Reaction batch for P422:
volume reagent
20 µl P422
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl AgeI(20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for P331:
volume reagent
20 µl P331
4 µl NEBuffer 4 (10x)
2 µl NgoMIV(10 U/µl)
1 µl PstI-HF (20 U/µl)
13 µl ddH2O
=40 µl TOTAL
  • Reaction batch for P417:
volume reagent
20 µl P417
4 µl NEBuffer 4 (10x)
2 µl NgoMIV(10 U/µl)
1 µl PstI-HF (20 U/µl)
13 µl ddH2O
=40 µl TOTAL
  • Reaction batch for P290:
volume reagent
20 µl P290
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI(20 U/µl)
1 µl AgeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • These reaction batches were incubated for 3 h at 37 °C.
  • Following gelelectrophoresis was performed with whole digestion batch after adding 4.44 µl of DNA loading buffer (10x) to each digestion batch at 70 V for 1.5 h on 1% low-melting agarose gel.
  • Pocket order:
P422 (AgeI-HF+PstI-HF) 100 bp DNA ladder P331 (NgoMIV+PstI-HF) 1 kbp DNA ladder
Backbone incl. PhyB was cut out Insert was cut out

TUM12 20120820 prep gel p422 p331.jpg

  • Pocket order:
P417 (NgoMIV+PstI-HF) 100 bp DNA ladder P290 (XbaI+PstI-HF) 1 kbp DNA ladder
Insert was cut out Backbone was cut out

TUM12 20120820 prep gel p417 p290.jpg

Sequencing of P395, P398, P422, P331, PCR2/P133 Klon 4

Investigator: Jeff

Aim of the experiment: Sequencing of P395, P398, P422, P331, PCR2/P133 Klon 4.

Procedure:

  • Plasmid concentrations were measured by nanodrop to calculate the dilution factor to have a concentration between 50 ng/µl and 100 ng/µl.
  • Plasmid concentration, determinated by nanodropping.
Plasmid Concentration in ng/µl
P395 465.6
P398 391.8
P422 375.8
P331 210.9
PCR2/P133 Klon 4 469.1
  • To get an end concentration between 50-100 ng/µl and an end volume of 15 µl, the dilution was performed as following:
Plasmid Concentration in ng/µl
P395 1:5 dilution: 3 µl plasmid + 12 µl ddH2O
P398 dilution: 1:4 dilution: 3.75 µl plasmid + 11.25 µl ddH2O
P422 1:4 dilution: 3.75 µl plasmid + 11.25 µl ddH2O
P331 1:3 dilution: 5 µl plasmid + 10 µl ddH2O
PCR2/P133 Klon 4 1:5 dilution: 3 µl plasmid + 12 µl ddH2O
  • Also the VF2 forward primer must have a end concentration of 2 ng/µl. So a mastermix for everybody was done with O68 (100 ng/µl)
O68 (VF2, 100 pmol/µl) 20 µl
ddH2O 980 µl
TOTAL (2 pmol/µl) 1000 µl
  • 15 µl was sent with each of P422, P331 and PCR2/P133 Klon 4 in a seperate ERG.

Ligation of P436+P437 and P206+P438

Investigator: Jeff

Aim of the experiment: Ligation of P436+P437 (PhyB(908NT) + 20aaLinker-LexA)and P206+P438 (20aaLinker + Gal4DBD.

Procedure:

  • Reaction batch for P436+P437:
volume reagent
1.11 µl P436
4.21 µl P437
2 µl T4 ligase buffer (10x)
0.5 µl T4 ligase (1 U/µl)
12.18 µl ddH2O
=20 µl TOTAL
  • Reaction batch for P206+P438:
volume reagent
1.69 µl P207
4.92 µl P438
2 µl T4 ligase buffer (10x)
0.5 µl T4 ligase (1 U/µl)
10.89 µl ddH2O
=20 µl TOTAL
  • These ligation batches including their negative controls, which only contain ddH2O instead of the insert, were put on a 16 °C waterbath and were incubated overnight.

Ligation of pTUM100 without f1-origin and Gal-promoter

  • Reaction batch for pYes2 circulation:
volume reagent
10,5 µl T4-Ligase
6,72 µl (100 ng) Dig. pYes 2
10 µl PEG 4000
10 µl 10,5 x T4 ligase buffer
68,28 µl H20
= 106 µl total

The mastermix was heated up to 72 C for 5 min bevore T4 ligase was added. It was separated in one reaction at room temperature and one reaction over night at 16 C.

Transformation of E.coli Xl1-blue

To 100 µl competent cells of E. coli Xl1-blue 10 µl of the pYes II Ligation reaction were added. Cells were kept on ice for 30 minutes. Heatshock was done at 37 C for 5 minutes Cells were incubated for 45 minutes in 1 ml LB-medium at 37 C Transformed cells were transferred on Agar plates with ampicillin

Preparative gelrun of TEF1-p, ADH1-p psb1c3 after digestion with PstI-HF and SpeI-HF

After preparative digestion with PstI and SpeI, 44,4 µl of each reaction were transferred onto an agarose gel. Gelrun was performed at 70 Volt for 90 min. 20120820 Prep.Verdau von ADH1,TEF1 in psb1c3, SpeI +Pst.png

Picking colonies of E.coli Xl1-blue, transforemed with Tef2-p + psb1c3 and Cyc-t + psb1c3

15 colonies from Tef2-p and 6 from Cyc-t were picked and transferred into LB-medium with 1x Chloramphenicole. Incubation was performed over night at 37 C.

Colony PCR of PCR43/p175 and PCR58/p133

Investigator: Lara

Aim: Establish colony PCR to increase speed of clone screening.

  • make sure you have PCR tubes and cell culture tubes labeled sufficiently. you need to have one pcr tube and one cell culture tube for each colony.
  • pick a colony with a sterile toothpick or pipet tip, smear some of the cells onto the wall of the pcr tube (a bit of pressure and smearing) and subsequently put the toothpick into a cell culture tube with LB-medium and antibiotic.
  • Citrus: 8 clones of PCR43/p175 were picked.
  • Lavendula: 8 clones of PCR58/p133 (5 clones of transformation of August 17th, 3 clones of August 8th) and PCR58/p175 (8 of transformation of August 17th) were picked
  • plasmid DNA of PCR2/p133 clone 4 as positive control

Citrus

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O28
0.5 µl 10 µM O30
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Lavendula

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O35
0.5 µl 10 µM O37
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL
  • PCR program:
Initial denaturation 94 °C 10 min
30 cycles 95 °C 30 s
59 °C 30 s
68 °C 1 min 55 sec
Final extension 68 °C 5 min
Hold 4 °C

Labels of the cell culture tubes/PCR tubes:

1-8: PCR43/p175

9: PCR2/p133 clone 4 (positive control)

10-17: PCR58/p175

18-22: PCR58/p133, transformation of August 17th

23-25: PCR58/p133, transformation of August 8th

TUM12 LS analytcolonyPCR3.png TUM12 LS analytcolonyPCR4.png TUM12 LS analytcolonyPCR5.png

Miniprep of PCR58/p133

Investigator: Dennis

Aim: Miniprep of over night cultures with number 1,2,4,6,7,9,12,13,15,16,18 (clones that were picked for colony PCR on saturday, PCR58/p133).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Miniprep does not work.

Miniprep of PCR58/p133

Investigator: Saskia

Aim: Miniprep of over night cultures with number 3,5,8,10,11,14,17 (clones that were picked for colony PCR on saturday, PCR58/p133).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation.

Number Concentration in ng/µl
3 254.7
5 223.4
8 339.4
10 303.5
11 162.4
14 142.1
17 151.8

Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C. (Falcon tube label: Miniprep Saskia 20.8.)

Ligation of insert and pTUM104

Investigator: Martin y Aloís

Aim: Ligate the extracted plasmids of the experiment before

Due to the small yield we only were able to run 4 ligations:

  1: pSB1C3 and P343
  I: pSB1C3 and P343 OVER NIGHT at 16 °C
  4: pYes and P343
 IV: pYes and P344 OVER NIGHT at 16 °C

1 and 4 were directly transformed in E. Coli - to be picked the next day.

Transformation of over-weekend ligation of caffeine synthesis genes in pSB1C3 and pTUM104

Investigator: Saskia

Aim: Transformation of the ligation

Operational Sequence

The transformation procedure was carried out as previously described, whereas the entire ligation batch was used for transformation in XL1 blue chemo competent e.coli-cells. The 30 minutes on ice incubation was followed by the heat shock at 37°C for 5 minutes and an incubation at 180 rpm at 37°C for about 45 minutes. Afterwords, the suspension was plated on appropriate plates (pSB1C3 transformants with chloramphenicol, pTUM104 transformants with ampicillin) and incubated at 37°C over night. Besides, the pellet was also plated out (resuspension in about ca. 100 µl LB medium).

Note: This transformation was performed without knowing, that a transformation with 5 µl of every ligation batch was already done on saturday. Furthermore, clone picking and preparing of over night liquid cultures was made, too (on sunday).

Miniprep of picked clones of possible positive pSB1C3_Caffeine_involved_gene and pTUM104_caffeine_involved_gene transformants

Investigator: Roman, Saskia

Aim:

Isolation of plasmids pSB1C3 and pTUM104, to check for uptaken inserts by an analytical restriction digest.

Operational sequence:

The putative positive clones were picked and used for inoculation on monday, 1 am. Thus, the plasmid preparation took place at 3 pm. Four clones of each plate had been picked. The plates were stored in the fridge, at 4°C. The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation.

Plasmidconcentration: Nanodroplet

pSB1C3_Caffeine_involved_gene Concentration in ng/µl
B1A 196.5
B1B 220.6
B1C 203.8
B1D 190.6
B2A 273.1
B2B 225.2
B2C 209.2
B2D 161.7
B3A 235.3
B3B 228.5
B3C 228.1
B3D 226.4
pTUM104_caffeine_involved_gene Concentration in ng/µl
Y1A 117.5
Y1B 200.9
Y1C 175.8
Y1D 206.7
Y2A 266.1
Y2B 306.2
Y2C 290.6
Y2D 302.7
Y3A 278.4
Y3B 162.7
Y3C 117.6
Y3D 211.3

Analytical digest of pSB1C3_Caffeine_involved_gene and pTUM104_caffeine_involved_gene plasmids

Investigator: Saskia

Aim:

Analytical digest of B1A-D, B2A-D, B3A-D, Y1A-D, Y2A-D, Y3A-D with PstI ans XbaI to controll the ligation of the inserts in pSB1C3 and pTUM104.

Procedure:

  • Digestion reaction batch
volume reagent
2.5 µl Plasmid-DNA
0.25 µl XbaI
0.25 µl PstI-HF
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
14.8 µl ddH2O
=20 µl TOTAL

Digestion over night at 37 °C.

Tuesday, August 21st

Transformation of overnight ligation with P436+P437 and P206+P438 in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment: Transformation of overnight ligation with P436+P437 and P206+P438 in E. coli XL1-Blue.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P436+P437 and P206+P438) and their negative controls (P436 NK, P206 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on new chloramphenicol plates.
  • Incubation at 37 °C overnight.

Miniprep of overnight cultures of TEF2-P in psb1c3 and CYC-T in psb1c3

Investigator: Georg

Procedure:

  • Plasmid extraction from over-night grown colonies was done according to the protocoll of Quiaprep Spin genextraction kit.

Analytical digestion of TEF2-P and Cyc-T in psb1c3

Investigator: Georg

Aim of the experiment: To find positive clones of TEF2-P and Cyc-T

Procedure

  • Reaction batch for digestion:
volume reagent
5,5 µl PstI-HF (NEB)
5,5 µl XbaI (NEB)
44 µl NEB-4 buffer
4,4 µl 100 x BSA (NEB)
325,6 µl dd H20
=385µl TOTAL
  • to 2,5 ml of DNA 17,5 µl reaction batch were added
  • Digestion took place at 37°C for 1 h

Analytical gel with Transformants of TEF2-P and CYC-T in psb1c3-Vector

Investigator: Georg

Aim of the experiment: Find positive clones

  • 9 µl of analytical digestion was applicated onto a 1% analytical agarose gel
  • Run was performed at 90 Volt for 1h
  • Result: Gelrun showed only two positive TEF2 clones and no CYC-T clone

Transformation of overnight ligation with P265B (pTUM100)

Investigator: Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Preparative digestion of P451 (TEF2-P in psb1c3) with SpeI-HF and PstI-HF

Investigator:Georg, Dennis

Aim of the experiment: Prepare TEF2-P for cloning

Procedure

  • Reaction batch for digestion:
volume reagent
1 µl PstI-HF (NEB)
1 µl Spe-HF (NEB)
0,4 µl 100xBSA (NEB)
4 µl NEB-4 buffer
20 µl P 451
13,6 µl dd H20
=40 µl TOTAL
  • Digestion took place at 37 C for 3 hours

Miniprep of "positive" colonies of colony PCR

Investigator: Lara

Aim: Get plasmid DNA of the plasmids that were identified as insert-positive clones.

Clones 2, 8, 11, 13, 18 & 20 of colony PCR (20.8.) were miniprepped.

  • Clone 2: 214 ng/µl
  • Clone 8: 142 ng/µl
  • Clone 11: 152 ng/µl
  • Clone 13: 252 ng/µl
  • Clone 18: 132 ng/µl
  • Clone 20: 210 ng/µl

Plasmid DNA is stored in a 50 ml Falcon tube at the lowest drawer of -20°C. (label: Miniprep 21.8. Lara)

Analytical restriction digest of miniprep products 21.8. ("positive" clones of colony PCR) and miniprep products 20.8.

Investigator: Lara

Aim: Check whether clones contain insert. Gel 1: Some clones that were picked for colony PCR of Saturday, August 18th. Gel 2: Clones that were identified as positive in colony PCR of Monday, August 20th.

volume reagent
5 µl plasmid DNA
0.25 µl Xba1
0.25 µl Spe1
2 µl NEBuffer 4
0.2 µl BSA (100x)
12.3 µl ddH2O
  • digest at 37°C for 2.5h.

TUM12 LS analytgel2108 gel1.png TUM12 LS analytgel2108.png

Colony PCR of PCR42/p133 and PCR56/p133

Investigator: Lara

Aim: To decrease number of false positive PCR products, a different primer combination was used: Instead of forward + reverse primers for the insert, the forward primer of the vector backbone and the reverse primer of the insert were used.

  • extension time of PCR reaction was adjusted to the longer PCR product (insert+primers+backbone from primer binding site)
  • annealing temperature was adjusted to lowest primer melting temperature
  • Citrus: 5 clones of PCR42/p133 (transformation of 8.8.) and PCR42/p175 (trafo 17.8.) were picked.
  • Lavendula: 5 clones of PCR56/p133 (trafo 17.8.) and PCR56/p175 (transformation of August 17th) were picked.
  • positive control: plasmid DNA of PCR2/p133 clone 4 as positive control
  • negative controls: 1. clone containing pSB1C3 with proteinlinker (Jeff); 2. ddH2O; 3. clone containing pTUM104 (P50, no insert)

Citrus in pSB1C3 (PCR42/p133)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O68
0.5 µl 10 µM O30
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Citrus in pYES (PCR42/p175)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O8
0.5 µl 10 µM O30
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Lavendula in pSB1C3 (PCR56/p133)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O68
0.5 µl 10 µM O37
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Lavendula in pYES (PCR56/p175)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O8
0.5 µl 10 µM O37
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL
  • PCR program:
Initial denaturation 94 °C 10 min
30 cycles 95 °C 30 s
50 °C 30 s
68 °C 1 min 55 sec
Final extension 68 °C 5 min
Hold 4 °C

Labels:

1-5: PCR42/p133 (Trafo 8.8) 6: PCR2/p133 clone 4 (positive control, trafo 8.8.) 7: pSB1C3 neg. control (proteinlinker) 8-12: PCR56/p133 13-17: PCR42/p175 18: neg. control: ddH2O 19: p50 clone 20-24: PCR56/p175

TUM12 LS analytcolonyPCR6.png TUM12 LS analytcolonyPCR7.png TUM12 LS analytcolonyPCR8.png

Miniprep of ligation of 17th August

Investigator: Andrea

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 50 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation.

Number Concentration in ng/µl
PCR56 in P133 (clone 1) 63.7
PCR56 in P133 (clone 2) 50.6
PCR56 in P133 (clone 3) 63.3
PCR56 in P133 (clone 4) 77.9
PCR56 in P133 (clone 5) 82.1
PCR56 in P175 (clone 1) 94.3
PCR56 in P175 (clone 2) 50.6
PCR56 in P175 (clone 3) 55.9
PCR56 in P175 (clone 4) 120.9
PCR56 in P175 (clone 5) 119.4
PCR 57 in P133 (clone 1) 47.6
PCR 57 in P133 (clone 2) 185.1
PCR 57 in P133 (clone 3) 60.9
PCR 57 in P133 (clone 4) 61.3
PCR 57 in P133 (clone 5) 57.0
PCR57 in P175 (clone 1) 113.4
PCR57 in P175 (clone 2) 67.7
PCR57 in P175 (clone 3) 116.1
PCR57 in P175 (clone 4) 66.2
PCR57 in P175 (clone 5) 47.5
PCR42 in P133 (clone 1) 66.2
PCR42 in P133 (clone 2) 131.9
PCR42 in P175 (clone 1) 154.4
PCR42 in P175 (clone 2) 72.2
PCR42 in P175 (clone 3) 105.8
PCR42 in P175 (clone 4) 109.0
PCR42 in P175 (clone 5) 116.4
PCR1 in P175 (clone 1) 121.6
PCR1 in P175 (clone 2) 94.8
PCR1 in P175 (clone 3) 123.5
PCR1 in P175 (clone 4) 103.7
PCR1 in P175 (clone 5) 106.9

Miniprep products are stored in a disposal bag in the middle drawer at -20°C. (label: Miniprep 21.08. Andrea)

  • numbering:

1: PCR 56 in P133 clone 1

2: PCR 56 in P133 clone 2

3: PCR 56 in P133 clone 3

4: PCR 56 in P133 clone 4

5: PCR 56 in P133 clone 5

6: PCR 56 in P175 clone 1

7: PCR 56 in P175 clone 2

8: PCR 56 in P175 clone 3

9: PCR 56 in P175 clone 4

10: PCR 56 in P175 clone 5

11: PCR 57 in P133 clone 1

12: PCR 57 in P133 clone 2

13: PCR 57 in P133 clone 3

14: PCR 57 in P133 clone 4

15: PCR 57 in P133 clone 5

16: PCR 57 in P175 clone 1

17: PCR 57 in P175 clone 2

18: PCR 57 in P175 clone 3

19: PCR 57 in P175 clone 4

20: PCR 57 in P175 clone 5

21: PCR 42 in P133 clone 1

22: PCR 42 in P133 clone 2

23: PCR 42 in P175 clone 1

24: PCR 42 in P175 clone 2

25: PCR 42 in P175 clone 3

26: PCR 42 in P175 clone 4

27: PCR 42 in P175 clone 5

28: PCR 1 in P175 clone 1

29: PCR 1 in P175 clone 2

30: PCR 1 in P175 clone 3

31: PCR 1 in P175 clone 4

32: PCR 1 in P175 clone 5

Analytical restriction digest of miniprep (miniprep 21.08.)

Investigators: Andrea

Aim: Check whether ligations have worked (ligation of 17th August)

volume reagent
3 µl plasmid DNA
0.5 µl Xba 1
0.5 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
12.2 µl ddH2O
  • Mastermix for 33 reactions (9.9 µl XbaI, 9.9 µl SpeI, 66 µl NEB, 6.6 µl BSA, 402.6 ddH2O)
  • 5 µl DNA were added to 15 µl Mastermix

Gelelectrophoresis:

  • expected:

Limonensynthase 1600 bp

pYES2 (P175) 5800 bp

pSB1C3 (P133) 2000 bp

21.08.12 analytgel1 Andrea bearbeitet.png

21.08.12 analytgel2 Andrea bearbeitet.png

21.08.12 analytgel3 Andrea bearbeitet.png

  • positive ligations:

Gel 2, PCR57 in P133 (pSB1C3), Klon 2

Gel 3, PCR1 in P175 (pYES2), Klon 2

Miniprep of 4CL in psB1C3 and pTUM104 after Quick Change from August 17th

Investigator: Saskia, Daniela

Overnight culutres were grown too long. To obtain bacteria with plasmids we exchanged the media and let them grow for another 6 hours. A Miniprep was done afterwards.

Using a Quiagen Miniprep kit, a plasmid isolation of three picked clones of a APT in pTUM104 RFC25 ligation was done.

The resulting plamid-concentrations (measured with nanodrop) were:

4CL- pYES clone 1: 181.8 ng/µl

4CL- pYES clone 2: 167.5 ng/µl

4CL- pYES clone 3: 158.3 ng/µl

4CL- pYES clone 4: 136.2 ng/µl

4CL+ pYES clone 1: 88.4 ng/µl

4CL+ pYES clone 2: 143.5 ng/µl

4CL+ pYES clone 3: 144.4 ng/µl

4CL+ pYES clone 4: 104.9 ng/µl

4CL- pSB1C3 clone 1: 170.4 ng/µl

4CL- pSB1C3 clone 2: 248.8 ng/µl

4CL- pSB1C3 clone 3: 231.1 ng/µl

4CL- pSB1C3 clone 4: 254.2 ng/µl

4CL+ pSB1C3 clone 1: 272.8 ng/µl

4CL+ pSB1C3 clone 2: 220.5 ng/µl

4CL+ pSB1C3 clone 3: 220.1 ng/µl

4CL+ pSB1C3 clone 4: 170.1 ng/µl

Analytical DNA-gelelectrophoresis of pSB1C3_Caffeine_involved_gene and pTUM104_caffeine_involved_gene plasmids after digestion with PstI and XbaI

Investigator: Roman, Saskia

Aim:

Analytical DNA-gelelectrophoresis of B1A-D, B2A-D, B3A-D, Y1A-D, Y2A-D, Y3A-D with PstI ans XbaI to controll the ligation of the inserts in pSB1C3 and pTUM104.

Procedure: Analytical gelelectrophoresis was performed at 90 V for 1 h.

Gel 1 up:

20120821 analGel1.jpg

1 kp ladder DNA ladder B1A B1B B1C B1D B2A B2B B2C B2D B3A B3B B3C

Gel 1 below:

TUM12 20120821 analGel1unten.jpg

1 kp ladder DNA ladder B3D Y1A Y1B Y1C Y1D

gel 2:

TUM12 20120821 analGel2.jpg

1 kp ladder DNA ladder Y2A Y2B Y2C Y2D Y3A Y3B Y3C Y3D

Result: All ligations were positive!

Preparation for transformation of pTUM104 with caffeine genes in yeast

Investigator: Saskia

Aim:

Transformation of S. cerevisiae INVSc1 with pTUM104 with CaXMT1, CaMXMT1 and CaDXMT1.

Procedure:

production of YPD medium as described in the pYES2 manual

Incubation of S. cerevisiae INVSc1 in 4 ml YPD as described in the pYES manual

Minipreparation of pTUM104_Preprothaumatin_RFC10 and pSB1C3_Preprothaumatin_RFC10

Investigator: Martianus Capella, Albertus Magnus

  • Inoculation.

Wednesday, August 22nd

PCR of P395 to introduce RFC10 pre- and suffix to finished SV40-Gal4AD-Linker-Pif3 construct

Investigator: Jeff

Aim of the experiment: PCR of P395 to introduce RFC10 pre- and suffix to finished SV40-Gal4AD-Linker-Pif3 construct for further cloning into pSB1C3 for partsregistry.

Procedure:

  • PCR reaction batch was prepared as follows:
substrate volume in µl
One Taq Standard Reaction Buffer (5x) 10
Plasmid template (P395) 1
Primer O75 (10 µM) 1
Primer O76 (10 µM) 1
dNTP (10 mM) 1
Polymerase One Taq 0,25
ddH2O 35.75
  • The PCR program was performed after following scheme with following conditions
Initial denaturation 94 °C 30 s
30 cycles 94 °C 30 s
57 °C 60 s
68 °C 60 s
Final extension 68 °C 5 min
Hold 4 °C infinite
  • After PCR, PCR purification kit from Qiagen was used.

Sequencing results of P395, P398, P422, P331

Investigator: Jeff

Results:

  • P395:
CCATACGACGTACCAGATTACGCTCATATGGCCATGGAGGCCAGTGAATTGCCTCTGTTT
GAACTTTTCAGGCTCACCAAAGCTAAGCTTGAATCTGCTCAAGACAGGAACCCTTCTCCA
CCTGTAGATGAAGTTGTGGAGCTGGTGTGGGAAAATGGTCAGATATCAACTCAAAGTCAG
TCAAGTAGATCGAGGAACATTCCTCCACCACAAGCAAACTCTTCAAGAGCTAGAGAGATT
GGAAATGGCTCAAAGACGACTATGGTGGACGAGATCCCTATGTCAGTGCCATCACTAATG
ACGGGTTTGAGTCAAGACGATGACTTTGTTCCATGGTTGAATCATCATTAAGGATCCATC
GAGCTCGAGCTGCAGATGAATCGTAGATACTGAAAAACCCCGCAAGTTCACTTCAACTGT
GCATCGTGCACCATCTCAATTTCTTTCATTTATACATCGTTTTGCCTTCTTTTATGTAAC
TATACTCCTCTAAGTTTCAATCTTGGCCATGTAACCTCTGATCTATAGAATTTTTTAAAT
GACTAGAATTAATGCCCATCTTTTTTTTGGACCTAAATTCTTCATGAAAATATATTACGA
GGGCTTATTCAGAAGCTTTGGACTTCTTCGCCAGAGGTTTGGTCAAGTCTCCAATCAAGG
TTGTCGGCTTGTCTACCTTGCCAGAAATTTACGAAAAGATGGAAAAGGGTCAAATCGTTG
GTAGATACGTTGTTGACACTTCTAAATAAGCGAATTTCTTATGATTTATGATTTTTATTA
TTAAATAAGTTATAAAAAAAATAAGTGTATACAAATTTTAAAGTGACTCTTAGTTTTAAA
ACGAAAATTCTTATTCTTGAGTAACTCTTTCCTGTAGGTCAGTT

Sequence of interest matches the expectation

  • P398:
CATACGACGTACCAGATTACGCTCATATGGCCATGGAGGCCAGTGAATTGCCTCTGTTTG
AACTTTTCAGGCTCACCAAAGCTAAGCTTGAATCTGCTCAAGACAGGAACCCTTCTCCAC
CTGTAGATGAAGTTGTGGAGCTGGTGTGGGAAAATGGTCAGATATCAACTCAAAGTCAGT
CAAGTAGATCGAGGAACATTCCTCCACCACAAGCAAACTCTTCAAGAGCTAGAGAGATTG
GAAATGGCTCAAAGACGACTATGGTGGACGAGATCCCTATGTCAGTGCCATCACTAATGA
CGGGTTTGAGTCAAGACGATGACTTTGTTCCATGGTTGAATCATCATTAAGGATCCATCG
AGCTCGAGCTGCAGATGAATCGTAGATACTGAAAAACCCCGCAAGTTCACTTCAACTGTG
CATCGTGCACCATCTCAATTTCTTTCATTTATACATCGTTTTGCCTTCTTTTATGTAACT
ATACTCCTCTAAGTTTCAATCTTGGCCATGTAACCTCTGATCTATAGAATTTTTTAAATG
ACTAGAATTAATGCCCATCTTTTTTTTGGACCTAAATTCTTCATGAAAATATATTACGAG
GGCTTATTCAGAAGCTTTGGACTTCTTCGCCAGAGGTTTGGTCAAGTCTCCAATCAAGGT
TGTCGGCTTGTCTACCTTGCCAGAAATTTACGAAAAGATGGAAAAGGGTCAAATCGTTGG
TAGATACGTTGTTGACACTTCTAAATAAGCGAATTTCTTATGATTTATGATTTTTATTAT
TAAATAAGTTATAAAAAAAATAAGTGTATACAAATTTTAAAGTGACTCTTAGTTTTAAAA
CGAAAATTCTTATTCTTGAGTAACTCTTTCCTGTAGTCAGTTGCTTTCTCAGGTATAGCA
TGAGGTCGCTCTTATTGACCACACCTCTACCGGCCGGTCGAAATTCCCCTACCCTATGAA
CATATTCCATTTTGTAATTTCGTGTCGTTTCTATTATGATTTCATTTATAAAGTTTATGT
ACAATATCAT

Sequence of interest matches the expectation

  • P422:
TATAAAATAGGCGTATCACGAGGCAGAATTTCAGATAAAAAAAATCCTTAGCTTTCGCTA
AGGATGATTTCTGGAATTCGCGGCCGCTTCTAGATGGCCGGCGTTTCCGGAGTCGGGGGT
AGTGGCGGTGGCCGTGGCGGTGGCCGTGGCGGAGAAGAAGAACCGTCGTCAAGTCACACT
CCTAATAACCGAAGAGGAGGAGAACAAGCTCAATCGTCGGGAACGAAATCTCTCAGACCA
AGAAGCAACACTGAATCAATGAGCAAAGCAATTCAACAGTACACCGTCGACGCAAGACTC
CACGCCGTTTTCGAACAATCCGGCGAATCAGGGAAATCATTCGACTACTCACAATCACTC
AAAACGACGACGTACGGTTCCTCTGTACCTGAGCAACAGATCACAGCTTATCTCTCTCGA
ATCCAGCGAGGTGGTTACATTCAGCCTTTCGGATGTATGATCGCCGTCGATGAATCCAGT
TTCCGGATCATCGGTTACAGTGAAAACGCCAGAGAAATGTTAGGGATTATGCCTCAATCT
GTTCCTACTCTTGAGAAACCTGAGATTCTAGCTATGGGAACTGATGTGAGATCTTTGTTC
ACTTCTTCGAGCTCGATTCTACTCGAGCGTGCTTTCGTTGCTCGAGAGATTACCTTGTTA
AATCCGGTTTGGATCCATTCCAAGAATACTGGTAAACCGTTTTACGCCATTCTTCATAGG
ATTGATGTTGGTGTTGTTATTGATTTAGAGCCAGCTAGAACTGAAGATCCTGCGCTTTCT
ATTGCTGGTGCTGTTCAATCGCAGAAACTCGCGGTTCGTGCGATTTCTCAGTTACAGGCT
CTTCCTGGTGGAGATATTAAGCTTTTGTGTGACACTGTCGTGGAAAGTGTGAGGGACTTG
ACTGGTTATGATCGTGTTATGGTTTATAAGTTTCATGAAGATGAGCATGGAGAAGTTGTA
GCTGAGAGTAAACGAGACGATTTAGAGCCTTATA

Partial sequence match the part (part is too long for one read)

  • P331:
TATAAAATAGGCGTATCACGAGGCAGAATTTCAGATAAAAAAAATCCTTAGCTTTCGCTA
AGGATGATTTCTGGAATTCGCGGCCGCTTCTAGATGGCCGGCGCGAGCGGCGCGGGCGGC
AGCGAAGGCGGCGGCAGCGAAGGCGGCACCAGCGGCGCGACCACCGGCAAAGCGTTAACG
GCCAGGCAACAAGAGGTGTTTGATCTCATCCGTGATCACATCAGCCAGACAGGTATGCCG
CCGACGCGTGCGGAAATCGCGCAGCGTTTGGGGTTCCGTTCCCCAAACGCGGCTGAAGAA
CATCTGAAGGCGCTGGCACGCAAAGGCGTTATTGAAATTGTTTCCGGCGCATCACGCGGG
ATTCGTCTGTTGCAGGAAGAGGAAGAAGGGTTGCCGCTGGTAGGTCGTGTGGCTGCCGGT
GAACCACTTCTGGCGCAACAGCATATTGAAGGTCATTATCAGGTCGATCCTTCCTTATTC
AAGCCGAATGCTGATTTCCTGCTGCGCGTCAGCGGGATGTCGATGAAAGATATCGGCATT
ATGGATGGTGACTTGCTGGCAGTGCATAAAACTCAGGATGTACGTAACGGTCAGGTCGTT
GTCGCACGTATTGATGACGAGGTTACCGTTAAGCGCCTGAAAAAACAGGGCAATAAAGTC
GAACTGTTGCCAGAAAATAGCGAGTTTAAACCAATTGTCGTAGATCTTCGTCAGCAGAGC
TTCACCATTGAAGGGCTGGCGGTTGGGGTTATTCGCAACGGCGACTGGCTGACCGGTTAA
TACTAGTAGCGGCCGCTGCAGTCCGGCAAAAAAACGGCAAGGTGTCACCACCCTGCCCTT
TTTCTTTAAAACCGAAAAGATTACTTCGCGTTATGCAGCTTCCTCGCTCACTGACTCGCT
GCGCTCGGTCGTTCGGCTGCGGCGAGCGGTATCAGCTCACTCAAAGGCGGTAATACGGTT
ATCCACAGAATCAGGGGATAACGCAGGAAGACAT

3 synonymous well-known point-mutation, the rest matches expectation.

Picking of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437.

Procedure:

  • 6 colonies of each transformation from P207+PCR69 (CamR) and P207+PCR70 (CamR) transformated cells were picked.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Transformation of E. coli XL1-Blue with P422

Investigator: Andrea

Aim of the experiment: Transform E. coli XL 1 blue with P422 to backup it.

Procedure:

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • adding of 1 µl of DNA
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
  • plating of 100 µl of the cells on an Chloramphenicol-plate
  • sedimentation of the leftover in a centrifuge (2 min, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Preparative digestion of P451 (TEF2-P in psb1c3)

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
1 µl PstI-HF (NEB)
1 µl SpeI-HF (NEB)
4 µl 10xNEB-4 buffer
0,4 µl 100 x BSA (NEB)
20 µl P 451
13,6 µl dd H20
=40µl TOTAL
  • to 20 of DNA 20 µl reaction batch were added
  • Digestion took place at 37°C for 3 h

Nanodrop measurement of ADH1-P

Investigator: Georg

  • ADH1-P (720 bp) Kol1: 24,9 ng/µl
  • ADH1-P (720 bp) Kol2: 38,6 ng/µl
  • ADH1-P (720 bp) Kol3: 42,1 ng/µl
  • ADH1-P (720 bp) Kol4: 42,5 ng/µl

Preparative gel of TEF1-P (P309), TEF2-P (P451) in psb1c3 and pTUM104 without GAL-P and f1 (pTUM100)

  • Preparative digests were loaded onto 1% preparative agarose gels
  • Gel run at 70 V for 3 hours
  • DNA bands were cut out
  • DNA was extracted according to Quiaquick gel purification Kit (salt removed)

20120822 Präp. Verdau pYesII, psb1c3 mit TEF1p, TEF2p mit SpeI und XbaI.png

Transformation of E.coli Xl1-blue competent cells with Preprothaumatin, TEF2-P (P351), and ADH1-P (720 bp)in psb1c3

Investigator: Georg

Aim of the experiment: To get a stock of TEF2p, Thaumatin and ADH1-P (720 bp)

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 1 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on Chloramphenicol plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new Chloramphenicol plates.

Preparative Digestion of P375 (pTUM104)

Investigator: Georg

Aim of the experiment: Digestion of pYesII with SwaI and PvuII for new ligation reaction to generat pYesII-TUM

Procedure:

  • Reaction batch for digestion:
volume reagent
2 µl SwaI(NEB)
2 µl PvuII (NEB)
4 µl NEB-3 buffer
0,4 µl 100 x BSA (NEB)
11,6 µl dd H20
=40µl TOTAL
  • pTUM104 was first digested with SwaI and BSA at room temperature. Afterwards PvuII was added and digested for another 3 hours at 37°C

Control digest of pTUM104_Preprothaumatin and pSB1C3_Preprothaumatin

Investigator: Cicero, Platon

Aim: Is the insert integrated?

  • Miniprep of p453-p462.

Analytical digest:

  • pSB1C3_Preprothaumatin: 6.25 µl (p453-457), 2 µl NEBuffer 4, 0.2 µl BSA, 0.25 µl XbaI. 0.25 µl SpeI, 11 µl ddH2O.
  • pYes2_Preprothaumatin: 6.25 µl (p458-462), 2 µl NEBuffer 4, 0.2 µl BSA, 0.25 µl XbaI. 0.25 µl SpeI, 11 µl ddH2O.
  • 37°C, 1h.

Analytical gel electrophoresis: 1 kb marker, p453, p454, p455, p456, p457, p458, p459, p459, p460, p461, p462

TUM12 20120822 pYes2pSB1C3 Preprothaumatin.jpg

  • Expected: pSB1C3_Preprothaumatin: backbone: 2.1 kb, insert 721 bp; pYes2_Preprothaumatin: backbone: 4.8 kb, insert: 721 bp.

Result: p456 and p457 were successful, the insert preprothamatin is integrated into pSB1C3.

Small scale yeast transformation with pTUM104_CaXMT1, pTUM104_CaMXMT1 and pTUM104_CaDXMT1

Investigator: Saskia, Roman

Aim: To transform our yeast strain saccharomyces cerevisiae INVSC1 -URA with the created pTUM104 plasmids, to be able to start expression of our genes.

Operational sequence:

  • The transformation of the yeast cells was performed as described in the pYES2 Manual of Invitrogen (small scale yeast transformation).
  • Used plasmids pTUM104_Insert were previously isolated out of clones: Y1B, Y2D, Y3A
  • As positive control, we used a pTUM104_eGFP plasmid (provided by Simon) and as negative control, no plasmid (water) was "transformed".
  • 1xTE and 1xLiAc/40%PEG-3350/1xTE solution were created immediately before use and sterilized by steril- filtration. The other solutions had already been available (and had also been sterilized by steril- filtration).
  • The resuspended pellets were plated on adequate selective SC -URA plates (minimal, defined medium for yeast, without uracil, due to selection for pTUM104 vector).
  • Plates were incubated at 30°C over night

Preparation of SC Minimal Medium

Investigator: Saskia, Roman

We prepared 3 l of SC Minimal Medium as described in the pYES manual on page 10. We mixed and autoclaved 50 ml of the already prepared SC-aliquots with 850 ml ELGA and 6.7 g Yeast Nitrogen Base. Additionally we prepared a 20 % glucose and two 20 % galactose solutions. Therefore we mixed 20 g galactose or glucose with 100 ml ELGA and autoclaved it. Note that you need more induction media with galactose than SC medium with glucose. And we don't use raffinose for the induction media.

Western Blot of APT at different times of expression in yeast

Investigator: Daniela

Aim of the experiment: Find out optimum time for expression.

SDS-PAGE:

Samples:

  • APT after 0 h
  • APT after 2 h -> not loaded correctly
  • APT after 4 h
  • APT after 6 h
  • APT after 8 h
  • APT after 11 h
  • APT after 21 h
  • GFP after 8 h (positive control)

10 µl of the samples (supernatant of the lysis reaction -> see August, 15th) were mixed with 2.5 µl 5xLaemmlired and denatured at 95 °C for 5 min.

  • 12 % gel
  • 120 V, 1.5 h

Blotting:

  • blotting of proteins on a nitrocellulose membrane (Whatman)
  • 50mA, 1 h

Blocking:

  • wash 3x10min with PBS-T0.1
  • the membrane is blocked over night at 4 °C on a shaking device

Control digest of 4CL in pTUM104 and pSB1C3-RFC25 after Quick Change from August 17th

Investigator: Daniela

Aim of the experiment: Test whether the Quick Change was successful

volume reagent
2.5 µl miniprep products
0.25 µl Eco RI HF (20U/µl)
0.25 µl PstI HF (20U/µl)
2 µl NEB4
15 µl ddH2O

Gel 1: 4CL in pYES

lane 1: 4CL- in pYES clone 1

lane 2: 4CL- in pYES clone 2

lane 3: 4CL- in pYES clone 3

lane 4: 4CL- in pYES clone 4

lane 5: 4CL+ in pYES clone 1

lane 6: 4CL+ in pYES clone 2

lane 7: 4CL+ in pYES clone 3

lane 8: 4CL+ in pYES clone 4

TUM12 4CL + pYES after Quick Change from August 17th.jpg

Gel 2: 4CL in pSB1C3-RFC25

lane 1: 4CL- in pSB1C3 clone 1

lane 2: 4CL- in pSB1C3 clone 2

lane 3: 4CL- in pSB1C3 clone 3

lane 4: 4CL- in pSB1C3 clone 4

lane 5: 4CL+ in pSB1C3 clone 1

lane 6: 4CL+ in pSB1C3 clone 2

lane 7: 4CL+ in pSB1C3 clone 3

lane 8: 4CL+ in pSB1C3 clone 4

TUM12 4CL + pSB1C3 after Quick Change from August 17th.jpg

The results are not unambiguous. Nevertheless the last Quick Change will be done on Friday 24th.

Repitition of analytical restriction digest and gel electrophoresis of miniprep (miniprep 21.08.)

Investigators: Andrea

Aim: Check whether ligations have worked (ligation of 17th August)

volume reagent
3 µl plasmid DNA
0.5 µl Xba 1
0.5 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
12.2 µl ddH2O

Gelelectrophoresis:

  • expected:

Limonensynthase 1600 bp

pYES2 (P175) 5800 bp

pSB1C3 (P133) 2000 bp

22.08.12 analytgel bearbeitet.png

  • positive ligations:

PCR1 in P175 (pYES2), Klon 2

Transformation of positive ligation products

Investigator: Andrea

Aim: Transform E.coli XL 1 blue with ligation products (PCR58/p133 (Klon20) (Miniprep: 21rst August), PCR2/p133 (Klon 4) (Miniprep: 8th August)) to produce colonies containing plasmid DNA.

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • adding of 1 µl of DNA
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
  • plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133)
  • sedimentation of the leftover in a centrifuge (2 min, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Breeding of positive clones of colony PCR of 21rst August

Investigator: Andrea

  • clone 1 / 3 / 5 / 11 were stored at 4°C in 2 ml LB medium
  • the clone suspension were added with the pipet tip to 2 ml fresh LB medium including antibiotics (Chlp) into culture tubes
  • tube incubate at 37°C and 180 rpm

Preparative digest of pSB1C3_Preprothaumatin (p456) and ligation with p400 (pTUM104 digested with XbaI and PstI)

Investigator: Martin, Dennis, Alois

Aim: Getting pYes2_Preprothaumatin

Preparative digest of p456:

  • pSB1C3_Preprothaumatin: 25 µl p456, 5 µl NEBuffer 4, 0.5 µl BSA, 1 µl XbaI, 1 µl PstI, 12.5 µl ddH2O.
  • 37°C, 2h.

Preparative gel electrophoresis: p456 (digested with XbaI and PstI), 1 kb marker

20120822 psb1c3 xba1 pst1 thaumatin vrdaut.jpg

  • Expected: pSB1C3_Preprothaumatin: backbone: 2.1 kb, insert 721 bp; successful.
  • Gel extraction, NanoDrop 2000.

Ligation:

  • 1.7 µl p400 (digested with XbaI and PstI), 5 µl p456 (digested with XbaI and PstI), 1 µl 10x T4-DNA ligase, 1 µl T4-DNA ligase buffer, 10.3 µl ddH2O. Additional: negative control without insert.
  • 16°C over night.

Thursday, August 23rd

Analytical gelelectrophoresis for ADH1-P (720 bp)

20120823 Anal. Gel ADH-p (m) und TEF2-Pcr-Produkte (Epic fail).png

  • Undigested ADH1-P and PCR-Products of TEF2-P were loaded

Preparation of Probes for sequencing

Investigator: Georg

Aim of this work: Concentration of DNA of 50-100 ng/µl

  • ADH1-P (186,1 ng/µl) : 5 µl DNA + 10 µl H2O (Primer Vf2 and VR)
  • ADH1-T (P403) (153,5 ng/µl) : 10 µl DNA + 10 µl H20 (VF2)
  • TEF1T (P465): 216,5 ng/µl : 7,5 µl DNA + 12,5 µl H20 (VF2) (Ist doch TEF1-P)
  • P(231) (207,8ng/µl) : 5 µl DNA+ 10 µl H20
  • TEF2-P (P451) 390 ng/µl: 3 µl DNA + 12 µl H20
  • TEF2-P (P450) 116 ng/µl : 7,5 µl + 7,5 µl H20

Gelextraction of preparative digested TEF1-P, TEF2-P in psb1c3, and digested pTUM104

Investigator: Georg

Aim of experiment: Extraction of preparative digested TEF1-P, TEF2-P in psb1c3, and digested pYES2-TUM

Investigator: Georg

  • Extraction was done according to Quiaquick gel extraction kit ( with elimination of salt)

Nanodrop Measurement of TEF1-P and TEF2-P

Investigator: Georg

  • TEF1-P= 57,5 ng/µl
  • TEF2-P= P 91,6 ng/ µl
  • Pyes2-Vector: 34,4 ng /µl (salt removed)

Self-ligation (self-circularization) of pTUM100

Aim of the experiment: Ligation of pYESII-TUM for transformation in E.coli XL1-blue Since no colonies were seen from the last transformation, a new reaction batch for ligase reaction was made.

  • Two reaction batches with 100 and 50 ng linearized Vector were made

Procedure:

  • Reaction batch for Ligation (100 ng):
volume reagent
10,0 µl T4-Ligase (1u/µl)
5,8 (=200 ng) PYesII digested (salt removed)
10,0 10x T4-ligase buffer
10 µl 50% PEG 4000
64,1 µl dd H20
=100µl TOTAL
  • Reaction batch for Ligation (50 ng):
volume reagent
10,0 µl T4-Ligase (1u/µl)
2,9 (=100 ng) PYesII digested (salt removed)
10,0 10x T4-ligase buffer
10 µl 50% PEG 4000
67,1 µl dd H20
=100µl TOTAL

Both batches were divided into a reaction at room temperature for 1h and 16 C over night.

Preparative digestion of ADH1-P (720 bp)in psb1c3 with SpeI and PSTI

Aim of experiment: Promoter ready for Ligation with proteine

  • Reaction batch for digestion:
volume reagent
4 µl PstI-HF (NEB)
4 µl SpeI (NEB)
16 µl NEB-4 buffer
1,6 µl 100 x BSA (NEB)
54,4 µl dd H20
=80µl TOTAL
  • 20 µl of DNA were mixed with 20 µl of digestion batch. Digestion was performed for 3 hours at 37 C.

Preparative gel with ADH1-P (720 bp)

Investigator: Georg

  • 40 µl of each preparative digestion was loaded onto a preparative 1% Agarose gel.
  • Gel war run at 70 V for 1 h

Transformation EYFP (Dist. Kit) ECFP (Distr. Kit), Lig. pTUM100 1h, 50ng and 100 ng of E.coli Xl-1 blue

Investigator: Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product pYESII, and 2 µl of EYFP and ECFP were added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates (pYESII and ECFP)and Kanamycin plates EYFP.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new antibiotic plates.

Transformation of E.coli Xl1-blue competent cells with ligation batches at room temperature

Investigator: Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Miniprep of overnight culture of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437

Investigator: Jeff

Aim of the experiment: Miniprep of overnight culture of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437.

Procedure:

  • Miniprep of P436+P437 (6 clones picked) and P206+P437 (6 clones picked) was performed with Qiagen Qiaprep spin miniprep kit after manufacturer's protocol.

Analytical digestion and gelelectrophoresis of P468-P473

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P468-P473 (miniprep of E. coli, transformed with P436+P437 ligation product) to prove whether ligation was succesful.

Procedure:

  • Mastermix for analytical digestion with NgoMIV+PstI-HF:
volume reagent
26 µl NEBuffer 4 (10x)
3.25 µl NgoMIV (10 U/µl)
3.25 µl PstI-HF (20 U/µl)
195 µl ddH2O
=227.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of samples P468-P473 in a new ERG and was mixed gently by pipetting up and down.
  • 90 min incubation at 37 °C.
100 bp ladder DNA ladder P468 P469 P470 P471 P472 P473 1 kbp ladder DNA ladder PCR71
Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Please see subsection for analytical gelelectrophoresis for PCR71

TUM12 20120823 anal gel p468-p473 pcr71.jpg

  • Ligation/Fusion of P436+P437 has been successful for all clones (P468-P473). N'-PhyB(908NT)-20aaLinker-LexA-C' is ready for last fusion to the SV40 nuclear localization signal sequence.

Analytical digestion and gelelectrophoresis of P474-P479

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P474-P479 (miniprep of E. coli, transformed with P206+P438 ligation product) to prove whether ligation was succesful.

Procedure:

  • Mastermix for analytical digestion with NgoMIV+PstI-HF:
volume reagent
26 µl NEBuffer 4 (10x)
3.25 µl NgoMIV (10 U/µl)
3.25 µl PstI-HF (20 U/µl)
195 µl ddH2O
=227.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of samples P474-P479 in a new ERG and was mixed gently by pipetting up and down.
  • 90 min incubation at 37 °C.
100 bp ladder DNA ladder P474 P475 P476 P477 P478 P479 P438 1 kbp ladder DNA ladder
Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Control

TUM12 20120823 anal gel p474-p479 p438.jpg

  • Ligation/Fusion of P206+P438 has been successful for all clones (P474-P479). N'-20aaLinker-Gal4DBD-C' is ready for (last?) fusion to the PhyB(908NT).

Analytical gelelectrophoresis of PCR71

Investigator: Jeff

Aim of the experiment: Analytical gelelectrophoresis of PCR71, to check whether PCR was successful.

Procedure:

  • Analytical gelelectrophoresis was performed at 90 V for 60 min
100 bp ladder DNA ladder P468 P469 P470 P471 P472 P473 1 kbp ladder DNA ladder PCR71
Please see second last subsection Please see second last subsection Please see second last subsection Please see second last subsection Please see second last subsection Please see second last subsection PCR was successful!

TUM12 20120823 anal gel p468-p473 pcr71.jpg

  • PCR was successful to introduce RFC10 pre- and suffix, N'-SV40NLS-Gal4AD-Linker-Pif3-C' is ready for ligation to pSB1C3 as a new part in the partsregistry.

Preperative digestion and gelelectrophoresis of P475

Investigator: Jeff, Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P475 with NgoMIV+PstI-HF for further fusion to C-terminus of PhyB(908NT).

Procedure:

  • Reaction batch for preperative digestion of P475 with NgoMIV+PstI-HF:
volume reagent
20 µl Plasmid P475
4 µl NEBuffer 4 (10x)
2 µl NgoMIV (10 U/µl)
1 µl PstI-HF (20 U/µl)
13 µl ddH2O
=40 µl TOTAL
  • This reaction batch has been incubated for 90 min at 37 °C.
  • Preperative gelelectrophoresis has been performed at 70 V for 90 min.
  • Insert has been cut out and extracted with Qiagen gel extraction kit.

TUM12 20120823 prep gel p475 insert.jpg

Ligation of P436+P480

Investigator: Jeff

Aim of the experiment: Ligation of P436+P480. Final construct: N'-PhyB-20aaLinker-Gal4DBD-C'. Maybe also fusion to SV40NLS is nescessary (normally Gal4DBD itself contains a own nuclear localization signal), if nuclear import is not sufficient enough because NLS of Gal4DBD is hidden by N-terminal linker and PhyB(908NT).

Procedure:

  • Reaction batch for ligation of P436+P480:
volume reagent
1.11 µl P436
6.43 µl P480
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
9.46 µl ddH2O
=20 µl TOTAL
  • Also negative control was prepared with the same reagents and volume but instead of the insert (P480) ddH2O was used.
  • Ligation was performed at 16 °C overnight.

Preparative restriction digest of PCR58 / P133 Klon20 (lavendula LS in pSB1C3, Miniprep 21rst August) and PCR2 / P133 Klon4 (citrus LS in pSB1C3, Miniprep 8th August) and P373 (pTUM104)

Investigator: Lara (digest), Andrea (gel electrophoresis)

Aim: Prepare digested PCR fragments for further ligation into pYES.

volume reagent
10 µl PCR2 / P133 clone 4 (8.8.)
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
23.6 µl ddH2O
=40 µl TOTAL
volume reagent
17 µl PCR58 / P133 (clone 20)
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
16.6 µl ddH2O
=40 µl TOTAL
volume reagent
20 µl P375
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
2 µl XbaI (20 U/µl)
4 µl NgoMIV (10 U/µl)
9.6 µl ddH2O
=40 µl TOTAL
  • Incubation at 37°C for 3 h.

expected:

Limonensynthase: 1600 bp

pYES2: 5800 bp

23.08.12 prepgel bearbeitetIV.png

Ligation of PCR2/P133 (Miniprep 08.08.) and PCR58/133 (Miniprep 21.08.) in pTUM104 (P375)

Investigator: Andrea

  • concentrations after gel extraction:

PCR2: 15.0 ng/µl

PCR58: 9.1 ng/µl

pYES2 (P375): 17.1 ng/µl

  • stored in 50ml Falcon (label "Ligierung 23.08. Andrea")

PCR2 in P375 digested with XbaI and AgeI/NgoMIV

volume reagent
2.78µl P375
5.22 µl PCR 2
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

PCR58 in P375 digested with XbaI and AgeI/NgoMIV

volume reagent
1.95 µl P375
6.05 µl PCR58
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)

Negative control

volume reagent
2 µl P375
6 µl ddH2O
1 µl T4 DNA Ligase
1 µl T4-ligase buffer (10x)
  • ligation ration 1:6

Picking of colonies of transformation (August 22nd)

Investigator: Andrea

Aim: Get cells for miniprep for amplifying ligation products.

Procedure:

  • Picking of 5 clones each of PCR2/p133 clone 20 (Miniprep 21.08.) and PCR58/P133 clone 4 (mini prep 08.08.)
  • Inbucation at 37°C (shaker) over night.

Miniprep of colony PCR clones of 21th August

Investigator: Andrea

Aim: Get plasmid DNA of the plasmids that were identified as insert-positive clones.

Clones 1, 3, 5, 11 of colony PCR (21.08.) were miniprepped.

  • Clone 1: 71.3 ng/µl
  • Clone 3: 55.6 ng/µl
  • Clone 5: 122.1 ng/µl
  • Clone 11: 118.2 ng/µl

Plasmid DNA is stored in a 50 ml Falcon tube at the lowest drawer of -20°C. (label: Miniprep 23.8. Andrea)

Analytical restriction digest and gel electrophoresis of miniprep of colony PCR products (miniprep 23.08.)

Investigators: Andrea

volume reagent
3 µl plasmid DNA
0.5 µl Xba 1
0.5 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
12.2 µl ddH2O

Gelelectrophoresis:

  • expected:

Limonensynthase 1600 bp

pSB1C3 (P133) 2000 bp

23.08.12 analytgel bearbeitet II.png

  • positive ligations:

clone 11 = PCR56/p133

  • only 10 µl were used for gel electrophoresis (rest is stored in the same tube with appendant miniprep products)

Transformation of pTUM104_Preprothaumatin and inoculation

Investigator: Martin, Alois

Aim: Getting pYes2_Preprothaumatin

Small Scale Yeast Transformation

Investigator: Martin, Alois

Aim: Preculture of S. cerevisiae according to pYes2_manuel_kommentiert

1. Inoculate 4 ml of YPD medium with a colony of S. cerevisiae and shake overnight at 30°C.

Colony PCR of PCR43/p175 and PCR57/p133

Investigator: Lara

Aim: Forward primer of vector backbone and the reverse primer of the insert were used.

  • extension time of PCR reaction was adjusted to the longer PCR product (insert+primers+backbone from primer binding site)
  • annealing temperature was adjusted to lowest primer melting temperature
  • Citrus: 8 clones of PCR43/p175 (transformation of 17.8.) were picked.
  • Lavendula: 8 clones of PCR57/p133 (trafo 17.8.), 8 clones PCR57/p175 (transformation of August 17th) and 8 clones of PCR56/p175 (trafo 17.8.) were picked.
  • positive control: plasmid DNA of PCR1/p175 (clone 20) as positive control
  • negative controls: ddH2O

Citrus in pYES (PCR43/p175)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O8
0.5 µl 10 µM O30
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Lavendula in pSB1C3 (PCR57/p133)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O68
0.5 µl 10 µM O37
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Lavendula in pYES (PCR56/p175 and PCR57/p175)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O8
0.5 µl 10 µM O37
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL
  • PCR program:
Initial denaturation 94 °C 10 min
30 cycles 94 °C 30 s
50 °C 30 s
68 °C 2 min
Final extension 68 °C 5 min
Hold 4 °C

Labels:

1-7: PCR43/p175

8: Pos. control: PCR1/p175 (20)

9-16: PCR57/p133

17-24: PCR57/p175

25-32: PCR56/p175

33: Negative control: ddH2O

TUM12 LS analytcolonyPCR9.png TUM12 LS analytcolonyPCR10.png TUM12 LS analytcolonyPCR11.png

Gelelectrophoresis still needs to be done

Preparation of aliquots for SC Minimal Medium

Investigator: Saskia, Roman

Preparation of ten 50 ml aliquots of SC Minimal Medium (URA-) as described in the commented pYES manual on page 10. To solve the substances you need to mix and heat it. For 1 l SC Minimal Medium: 50 ml Aliquot + 6.7 g Yeast Nitrogen Base + 850 ml water. Autoclave seperately 20 g glucose or galactose in 100 ml water.

Preparation of 200 ml flasks with SC Minimal Medium (URA-)

Investigator: Saskia, Volker

Preparation of 200 ml flasks with SC Minimal Medium (URA-) and galactose for expression.

Preparation of Selective SC Minimal Medium Plates

Investigator: Saskia

Preparation of selective SC Minimal Medium Plates without Uracil and without Uracil and Leucin as described in the pYES manual on page 10. 3 % Agar were used instead of 2 % (the last time the agar didn't jell with 2 % Agar).

Western Blot of APT at different times of expression in yeast - continued

Investigator: Daniela

Aim of the experiment: Find out optimum time for expression.

Detection:

  • via Streptavidin-AP (1:4000) ->10ml, Streptavidin-AP diluted in PBST0.1+3%BSA
  • 1h incubation, be sure that the whole membrane is covered with Streptavidin-AP solution.

Developing:

  • 15 ml AP-buffer mixed with 45 µl BCIP (50 mg/ml in DMF) and 7.5 µl NBT (75 mg/ml in 70 % DMF)
  • incubation: about 30 min

Expected bands:

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

TUM12 120823Western Blot.jpg

Sequencing of plasmids pSB1C3_Insert and pTUM104_Insert

Investigator: Roman, Saskia

Aim: Proof of inserted sequence

Sequenced plasmids:

  • pSB1C3_CaXMT1 (clone B1B): sequence ok
  • pSB1C3_CaMXMT1 (clone B2A): sequence ok
  • pSB1C3_CaDXMT1 (clone B3D): sequence ok
  • pTUM104CaXMT1 (clone Y1B): sequencing failed
  • pTUM104_CaMXMT1 (clone Y2D): sequencing failed
  • pTUM104_CaDXMT1 (clone Y3A): sequencing failed

Note: Sequencing of pTUM104 plasmids will be repeated next week with newly picked clones. Sequencing results of all three pSB1C3 plasmids (containing inserts) were positive.

Friday, August 24th

Preparative gelelectrophoresis of digested ADH1-P (720 bp)

20120823 Präpar. Verdau ADH1-P (mittel) in psb1c3 mit SpeI und PstI.png

  • Digestion with PstI-HF and Spe-HF was succesful

Analytical digestion of P465 and P 309

Investigator: Georg

Aim of experiment: Since the sequence in P465 was from TEF1-P instead of TEF1-T you have to verify the insert

Procedure

  • Reaction batch for digestion:
volume reagent
0,75 µl PstI-HF (NEB)
0,75 µl XbaI (NEB)
6 µl NEB-4 buffer
0,6 µl 100 x BSA (NEB)
44,4 µl dd H20
=60µl TOTAL
  • Analytical gel showed that everywhere was TEF1-P

20120824 TEST ob in P309 P307, P465 TEF1P und Term haben.png

Gelextraction of ADH1-P (720 bp) P299,P300 (TEF1-P), P432 and P433 (TEF1-P +psb1c3), P434 and P435 (ADP-P lang + psb1c3)

Investigator:Georg

  • Gelextraction was performed according to Quiaquick gel extraction protocol (salt removed)

Nanodrop for concentration measuring of ADH1-P, P434, P299, P432

Investigator:Georg

  • ADH1-P (720 bp)= 22,1 ng/µl
  • P434 = 64,1 ng/ml
  • P299 = 12,6 ng/µl
  • P432 = 49,8 ng/µl

Picking of colonies of pTUM104, GFP and ADH1-P (720 bp)

Investigator: Georg

  • 10 colonies from pYES2-TUM transformation with 50 ng/µl (1h), 4 Colonies GFP and 2 Colonies from ADH1-P were Picked
  • Colonies from pYES2 and GFP were transferred to 5 ml LB-Medium with 1x Ampicillin, ADH1-P colonies were transferred to LB-Medium with 1x Chloramphenicol

Preperative digestion and gelelectrophoresis of P470 and PCR71

Investigator: Jeff, Dennis

Aim of the experiment:

Procedure:

  • Reaction batch for preperative digestion of P470 with NgoMIV+PstI-HF:
volume reagent
20 µl Plasmid P470
4 µl NEBuffer 4 (10x)
2 µl NgoMIV (10 U/µl)
1 µl PstI-HF (20 U/µl)
13 µl ddH2O
=40 µl TOTAL
  • Reaction batch for preperative digestion of PCR71 with XbaI+PstI-HF:
volume reagent
25 µl PCR71
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
17.5 µl ddH2O
=50 µl TOTAL
  • These reaction batches were incubated for 2.5 h at 37 °C.
  • 4.44 µl of DNA loading buffer (10x) was added to the digestion of PCR71 and 5.55 µl of DNA loading buffer (10x) was added to the digestion of P470.
  • Preperative gelelectrophoresis was performed at 70 V for 90 min.
100 bp DNA ladder P470 (NgoMIV+PstI-HF) PCR71 (XbaI+PstI-HF) 1 kbp DNA ladder
Digested Insert (upper band!) was cut out Digested PCR product was cut out

TUM12 20120824 prep gel p470 insert pcr71.jpg

  • Insert very difficult to cut out because insert and backbone are near and has a very broad width.
  • Analytical gelelectrophoresis should be performed to verify the insert length and the purity of the insert by checking if there is a pSB1C3 contamination at about 2.1 kbp.

Transformation of E. coli XL1-Blue with ligation product P436+P480

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation product P436+P480 for the (pre-)finale contruction of N'-PhyB(908NT)-20aaLinker-Gal4DBD-C'.

Procedure:

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation product (P436+480) and it's negative control (P436 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on new chloramphenicol plates.
  • Incubation at 37 °C overnight.

Analytical gelelectrophoresis of P491, PCR53, PCR62, P492, P493

Investigator: Jeff

Aim of the experiment: Analytical gelelectrophoresis was done for P491 because the length of the part was not exactly determinable in the preperative gelelectrophoresis because the width of the DNA band was very strong. PCR53, PCR62, P492, P493 was performed for Georg because there was place for other samples.

Procedure:

  • 5 µl of the samples were mixed with 1 µl of DNA loading buffer (10x).
  • Analytical gelelectrophoresis was performed at 90 V for 1.5 h.
100 bp DNA ladder P491 PCR53 PCR62 P492 P493 1 kbp DNA ladder
Length is okay, but contaminated with small amount of pSB1C3 backbone Please see subsection for constitutive promoters Please see subsection for constitutive promoters Please see subsection for constitutive promoters Please see subsection for constitutive promoters

TUM12 20120824 anal gel p491 pcr53 pcr62 p492 493.jpg

Cycled ligation of P399+P491 and P439+PCR72

Investigator: Jeff

Aim of the experiment: Etablishing a new method for ligation to combine high ligase activity and optimal annealing temperature of the sticky ends. Cycled ligation was performed for P399+P491 and P439+PCR72 and their negative controls P399 NK and P439 NK

Procedure:

  • Ligation batch for P399+P491
volume reagent
1.97 µl P399
7.08 µl P491
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
7.95 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P499+P491
volume reagent
2.24 µl P439
5.19 µl PCR72
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
9.57 µl ddH2O
=20 µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Minipreparation of pSB1C3_Preprothaumatin and pTUM104_Preprothaumatin

Investigator: Martin, Alois

  • pYes2_Preprothaumatin: p481-p484
  • pSB1C3_Preprothaumatin: p485-490.

Control digest of pTUM104_Preprothaumatin

Investigator: Martin, Alois

Aim: Is the insert (preprothaumatin) integrated into pYes2?

Analytical digest:

  • 12 µl (p481-p485), 2 µl NEBuffer 4, 0.2 µl BSA, 0.25 µl XbaI, 0.25 µl SpeI, 5.3 µl ddH2O; 37°C, 1h.

Analytical gel electrophoresis: 1 kb marker, p481, p482, p483. p484, p485

TUM12 20120824 pYes2 Preporthau final.jpg

  • Expected: backbone: 5.8 kbp, insert: 721 bp.

Result: All clones are positive, preprothaumtain is integrated in pYes2.

Small scale yeast transformation of S. cerevisiae with pTUM104_Preprothaumatin

Investigator: Martin, Alois

Procedure according to pYes2_manual_kommentiert:

  • 2. Determine the OD600 of your overnight culture. Dilute culture to an OD600 of 0.4 in 50 ml of YPD medium, add 5ml 20% glucose and grow an additional 2–4 hours. 3. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 40 ml 1X TE. 4. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 2 ml of 1X LiAc/0.5X TE. 5. Incubate the cells at room temperature for 10 minutes. 6. For each transformation, mix together 1 μg plasmid DNA and 100 μg (10 μl) denatured sheared salmon sperm DNA with 100 μl of the yeast suspension from Step 5. 7. Add 700 μl of 1X LiAc/40% PEG-3350/1X TE (7 ml 50% PEG3350 was synthesized (3.5 g in 7 ml bidest.water); 6.4 ml 50% PEG3350 + 800 μl 10x LiAc + 800 μl 10x TE were mixed) and mix well. 8. Incubate solution at 30°C for 30 minutes. 9. Add 88 μl DMSO, mix well, and heat shock at 42°C for 7 minutes. 10. Centrifuge in a microcentrifuge for 10 seconds and remove supernatant. 11. Resuspend the cell pellet in 1 ml 1X TE and re-pellet. 12. Resuspend the cell pellet in 50–100 μl 1X TE and plate on a selective plate (SCU-plates + Glucose). Incubate the SCU-plates at 30°C over the weekend.

Name: pYes2_Preprothaumatin, S. cerevisiae, Schappert, Bräuer.

Results: Didn't work. Have to redo it.

Miniprep of positive clones

Investigator: Lara

Aim: Get more plasmid DNA of the positive clones.

  • PCR58/p133 (tube 1): 440 ng/µl
  • PCR58/p133 (tube 2): 224 ng/µl
  • PCR58/p133 (tube 3): 356 ng/µl
  • PCR2/p133 (tube 1): 224 ng/µl
  • PCR2/p133 (tube 2): 282 ng/µl
  • PCR2/p133 (tube 3): 227 ng/µl

Eppis are stored in a disposal bag (label: Positive Klone, Lara, 24.8.) in the lowest drawer of -20°C.

Analytical restriction digest of transformed positive clones

Investigator: Lara

Aim: Check that transformed clones are OK.

volume reagent
2.5 µl plasmid DNA
0.25 µl Xba 1
0.25 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
14.8 µl ddH2O

Gelelectrophoresis:

Gel:

1. Gene Ruler 1kb

2. PCR58/p133 (1)

3. PCR58/p133 (2)

4. PCR58/p133 (3)

5. PCR2/p133 (1)

6. PCR2/p133 (2)

7. PCR2/p133 (3)

  • expected:

Limonene synthase 1600 bp

pSB1C3 (P133) 2000 bp

TUM12 LS analytgel2408.png

Transformation with insert-positive plasmids and ligation products (ligation 23.8.)

Investigator: Lara

Aim: Transform E.coli XL 1 blue with plasmids that were identified as being positive for insert. Furthermore transformation with ligation products of ligation 23.8.

Transformations:

1. PCR1/pYES clone 2 (no. 29, disposal bag, middle drawer of -20°C)

2. PCR56/p133 (miniprep 23.8., clone 11, Falcon, lowest drawer of -20°C)

3. Ligation product PCR2/pYES (ligation 23.8.)

4. Ligation product PCR58/pYES (ligation 23.8.)

5. Ligation product negative control (ligation 23.8.)

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • adding of 1 µl of DNA (positive plasmids) or of 5 µl of ligation products
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
  • plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133), Ampicillin-plate (pYES)
  • sedimentation of the leftover in a centrifuge (2 min, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Quick Change mutagenesis to remove EcoRI(at 150 bp) in the 4CL

Investigator: Saskia, Daniela

Aim of the experiment: Generation of an RFC 25 compatible version of the 4CL gene.

Samples:

  • 4CL- in pYES clone 2
  • 4CL+ in pYES clone 2
  • 4CL- in pSB1C3 clone 1
  • 4CL+ in pSB1C3 clone 2

PCR
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA
0.5 µl 1:10 dilution of O77 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA
0.5 µl 1:10 dilution of O78 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • addition of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate (pYES) or an Chlp-LB-plate (pSB1C3)
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate (pYES) or an Chlp-LB-plate (pSB1C3)

Saturday, August 25th

Transformation of E. coli XL1-Blue with ligation product P399+491 and P439+PCR72

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P399+491 and P439+PCR72 for the constructs of N'-SV40NLS-PhyB(908NT)-20aaLinker-LexA-C' and N'-SV40-Gal4AD-Linker-Pif3-C'.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P399+491 and P439+PCR72) and it's negative control (P499 NK and P439 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.
  • Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with ligation products of P436+480

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation product of P436+480 (P495).

Procedure:

  • 6 colonies of P436+480 (P495) (CamR) transformated cells were picked.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Miniprep pTUM100, GFP and ADH1-P (720 bp)

Investigator: Jeff

Aim of the experiment: Miniprep of pTUM100, GFP and ADH1-P (720 bp)

Procedure:

  • Miniprep was performed after manufacturer's protocol (QIAGEN - QIAprep Spin Miniprep Kit).

Picking of E.coli XL1-Blue transformed with 4CL after Quick Change from August 24th

Investigator: Daniela

Aim of the experiment: Picking of E.coli XL1-Blue transformed with 4CL after Quick Change from August 24th.

Procedure:

4 colonies were taken of each transformation.

  • 4CL- in pYES clone 2
  • 4CL+ in pYES clone 2
  • 4CL- in pSB1C3 clone 1
  • 4CL+ in pSB1C3 clone 2
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4-5 ml of LB-medium and antibiotics (Amp -> pYES, Chlp -> pSB1C3. These tubes were put overnight in a 180rpm cell culture shaker at 37°C.

Sunday, August 26th

Miniprep of E. coli XL-Blue cells, transformated with ligation products of P436+480

Investigator: Jeff

Aim of the experiment:

Procedure:

  • Miniprep was performed after manufacturer's protocol (QIAGEN - QIAprep Spin Miniprep Kit). Tubes were labeled with P501-P506.

Analytical digestion and gelelectrophoresis of P501-P506

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P501-P506 with NgoMIV+PstI-HF.

Procedure:

  • Mastermix for analytical digestion with NgoMIV+PstI-HF:
volume reagent
14 µl NEBuffer 4 (10x)
1.75 µl NgoMIV (10 U/µl)
1.75 µl PstI-HF (20 U/µl)
105 µl ddH2O
=122.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of samples P501-P506 in a new ERG and was mixed gently by pipetting up and down.
  • 90 min incubation at 37 °C.
  • 9 µl of the samples were mixed with 1 µl of DNA loading buffer (10x).
  • Analytical gelelectrophoresis was performed at 90 V for 1.5 h.

TUM12 20120826 anal gel p501-p506.jpg

  • All picked clones are positive! Finished construct: N'-Phyb(908NT)-20aaLinker-Gal4DBD-C'. Possible last fusion to SV40NLS, if N-terminal NLS of Gal4DBD is strongly concealed by N-terminal fusion by PhyB-20aaLinker.

Picking of E. coli XL-Blue cells, transformated with ligation products of P399+491 and P439+PCR72

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P399+491 and P439+PCR72.

Procedure:

  • 6 colonies of the transformation with P399+491 (CamR) and 10 colonies of the transformation with P439+PCR72 (CamR) were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Miniprep of Y1B, Y2D and Y3A

Investigator: Saskia

Aim:

Preparation of pTUM104 Y1B, Y2D and Y3A for sequencing.

Plasmidconcentration: Nanodroplet

pTUM104_caffeine_involved_gene Concentration in ng/µl
Y1B 66.4
Y2D 47.6
Y3A 49.7

Picking of colonies of PCR2 pTUM104 and PCR58 pTUM104 and of PCR1 pTUM104 and PCR56 pSBC3

Investigator: Saskia

Procedure:

  • Picking of 5 clones each of PCR2 pTUM104 and PCR58 pTUM104 and picking of 2 clone each of PCR1 pTUM104 and PCR56 pSBC3
  • Inbucation at 37°C (shaker) over night.

Analytical restriction digest and analytical gel electrophoresis

Investigator: Saskia and Katrin

Aim of the experiment: Controll of success of the Quickchange mutagenesis from 24.08.2012 to remove EcoRI from 4Cl

Analytical digest: of Cl- pYES, Cl+ PYES, Cl- pSB1C3 and Cl+ pSB1C3

Procedure:

  • Digestion reaction batch
volume reagent
2.5 µl Plasmid-DNA
0.25 µl EcoRI HF
0.25 µl SpeI HF
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
14.8 µl ddH2O
=20 µl TOTAL

Digestion over night at 37 °C.

Analytical DNA-gelelectrophoresis:

Procedure: Analytical gelelectrophoresis was performed at 90 V for 1 h.

Gel 1:

1 kp ladder DNA ladder Cl+ pYES1 Cl- pSB1C3 Cl+ pYES3 Cl+ pYES4 Cl- pYES1 Cl- pYES2 Cl- pYES3 Cl- pYES4 100 bp ladder DNA ladder

TUM12 AnalVerdau 4CL 1.jpg

Gel 2:

1 kp ladder DNA ladder Cl+ pSB1C31 Cl+ pSB1C3 Cl+ pSB1C33 Cl+ pSB1C34 Cl- pSB1C31 Cl+ pYES Cl- pSB1C33 Cl- pSB1C34 100 bp ladder DNA ladder

TUM12 AnalVerdau 4CL 2.jpg

Week 12

Monday, August 27th

Miniprep of E. coli XL-Blue cells, transformated with ligation products of P399+P491 and P439+PCR72

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products of P399+P491 and P439+PCR72.

Procedure:

  • Miniprep was done after manufacturer's protocol. (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of the minipreps P524-P539

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps P524-P539 with NgoMIV+PstI-HF.

Procedure:

  • Mastermix for analytical digestion for P507-P522 with NgoMIV+PstI-HF:
volume reagent
34 µl NEBuffer 4 (10x)
4.25 µl NgoMIV (10 U/µl)
4.25 µl PstI-HF (20 U/µl)
255 µl ddH2O
=297.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P507-P522).
  • The reaction mixes were incubated at 37 °C for 90 min.
  • 9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).
  • Analytical gelelectrophoresis was performed at 90 V for about 60 min.

P524-P533:

100 bp DNA ladder P524 P525 P526 P527 P528 P529 P530 P531 P532 P533 1 kbp DNA ladder
Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed Ligation failed

TUM12 20120827 anal gel p524-p533.jpg

P534-P539:

100 bp DNA ladder P533 P534 P535 P536 P537 P538 P539 1 kbp DNA ladder
Ligation maybe succesful, SEQUENCING has to be done!! Ligation maybe succesful, SEQUENCING has to be done!! Ligation maybe succesful, SEQUENCING has to be done!! Ligation maybe succesful, SEQUENCING has to be done!! Ligation maybe succesful, SEQUENCING has to be done!! Ligation maybe succesful, SEQUENCING has to be done!! Ligation maybe succesful, SEQUENCING has to be done!!

TUM12 20120827 anal gel p534-p539.jpg

Preperative digestion and gelelectrophoresis of P506

Investigator: Jeff, Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P506 with NgoMIV+PstI-HF.

Procedure:

  • Reaction batch for P506 with NgoMIV+PstI-HF:
volume reagent
20 µl P506
4 µl NEBuffer 4 (10x)
2 µl NgoMIV (10 U/µl)
1 µl PstI-HF (20 U/µl)
13 µl ddH2O
=40 µl TOTAL
  • Preperative digestion was carried out at 37 °C for 2 h.
  • Preperative gelelectrophoresis was performed at 70 V for 2 h.
  • Upper band (Insert) was cut out and DNA was extracted with gel extraction kit from Qiagen after manufacturer's protocol.

TUM12 20120827 prep gel.DennisTif.jpg

Small Scale Yeast Transformation - Preparatory culture

Investigator: Martin, Alois

Aim: Preculture of S. cerevisiae according to pYes2_manuel_kommentiert.

1. Inoculate 4 ml of YPD medium with a colony of S. cerevisiae and shake well overnight at 30 °C.

Results: 30 °C and not 37 °C. Redo!

Miniprep of positive clones

Investigator: Lara

Aim: Get more plasmid DNA of the positive clones (PCR1/pYES & PCR56/p133). Check ligation products (PCR58/pYES, PCR2/pYES). Check colony PCR clones.

  • PCR58/pYES (tube 1): ng/µl
  • PCR58/pYES (tube 2): 83 ng/µl
  • PCR58/pYES (tube 3): 92 ng/µl
  • PCR58/pYES (tube 4): 136 ng/µl
  • PCR58/pYES (tube 5): 110 ng/µl
  • PCR2/pYES (tube 1): 212 ng/µl
  • PCR2/pYES (tube 2): 170 ng/µl
  • PCR2/pYES (tube 3): 173 ng/µl
  • PCR2/pYES (tube 4): 162 ng/µl
  • PCR2/pYES (tube 5): 132 ng/µl
  • PCR1/pYES (tube 1): 112 ng/µl
  • PCR1/pYES (tube 2): 104 ng/µl
  • PCR56/p133 (tube 1): 207 ng/µl
  • PCR56/p133 (tube 2): 80 ng/µl
  • ColPCR Clone2: 121 ng/µl
  • ColPCR Clone9: 82 ng/µl
  • ColPCR Clone16: 81 ng/µl
  • ColPCR Clone26: 96 ng/µl
  • ColPCR Clone28: 280 ng/µl
  • ColPCR Clone32: 146 ng/µl

Eppis are stored in a disposal bag (label: Positive Klone, Lara, 27.8.) in the lowest drawer of -20°C.

Analytical restriction digest

Investigator: Lara (digest), Andrea (gel)

Aim: Check clones for insert.

volume reagent
3 µl plasmid DNA
0.25 µl Xba 1
0.25 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
14.3 µl ddH2O

Gelelectrophoresis:

Gel:

27.08.12 analytgel1 bearbeitet.png 27.08.12 analytgel2 bearbeitet.png

  • expected:

Limonene synthase 1600 bp

pYES2 5800 bp

pSB1C3 (P133) 2000 bp

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Picking transformed Saccharomyces cerevisiae cells for protein expression in yeast

  • Inoculation of overnight cultures: one clone from plate with PCR 1 in P175 clone 2 (Miniprep 21.08.) (29) was picked,resuspended in 15 ml SCU medium with glucose and incubated at 30 °C overnight

Picking of colonies for miniprep

Investigator: Saskia

Aim: New miniprep for new transformation of S. cerevisiae with Y1, Y2 and Y3 and new sequencing (the last one wasn't successful)

  • Picking of 3 clones each of Y1, Y2 and Y3. There are named Y1E, Y1F, Y1G and Y2E, Y2F, Y2G and Y3E, Y3F, Y3G
  • Inbucation at 37°C (shaker) over night.

Picking of colonies for yeast transformation

Investigator: Saskia

Aim: yeast transformation for expression of caffeine-genes

Procedure:

  • Picking of 1 clone of S. cerevisiae INVScN1 in 4 ml YPD
  • Inbucation at 30°C (shaker) over night.

Tuesday, August 28th

Analytical gelelectrophoresis of pTUM100 undigested

Investigator: Georg

  • Plasmid-DNA of undigested pYES-TUM colonies was applicated on analytical 0,5% Agarosegels
  • pYES2 served as control plasmid
  • colonies 1-4 and 6-10 showed positive pYES-TUM2 variants

20120828 pYES2-TUM Kol ungeschnitten (Gel1).png 20120828 pYes2-Tum Kol.png

Analytical digestion of pTUM100

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
2,75 µl PstI-HF (NEB)
22 µl NEB-4 buffer
167,75 µl dd H20
=192,5µl TOTAL
  • to 2,5 ml of DNA 17,5 µl reaction batch were added
  • Digestion took place at 37°C for 1 h

Analytical gelelectrophoresis of pTUM100

Investigator:

  • Digested pYES2-Tum clones were analyzed on 0,5% Agarose gels
  • Clones 1-4 and 6-10 were positive

20120829 Anal.png 20120829 Gel 2 pYES2-tum.png

Nanodrop for concentration measuring of ADH-P,pTUM100,GFP

Investigator: Georg

  • ADH-P Kol1: 112,5 ng/µl
  • ADH-P Kol2: 105,4 ng/µl
  • pYES2-TUM Kol1: 155,7 ng/µl
  • pYES2-TUM Kol2: 67,3 ng/µl
  • pYES2-TUM Kol3: 124,5 ng/µl
  • pYES2-TUM Kol4: 91,5 ng/µl
  • pYES2-TUM Kol5: 91,7 ng/µl
  • pYES2-TUM Kol6: 122,8 ng/µl
  • pYES2-TUM Kol7: 105,9 ng/µl
  • pYES2-TUM Kol8: 123,9 ng/µl
  • pYES2-TUM Kol9: 129,8 ng/µl
  • pYES2-TUM Kol10:136,9 ng/µl
  • GFP Kol1: 152,1 ng/µl
  • GFP Kol2: 107,5 ng/µl
  • GFP Kol3: 53,9 ng/µl
  • GFP Kol4: 146,9 ng/µl

Cycled ligation of P399+P552

Investigator: Dennis, Jeff

Aim of the experiment: Cycled ligation was performed for P399+P552 and it's negative control P399 NK.

Procedure:

  • Ligation batch for P399+P552
volume reagent
1.97 µl P399
12 µl P491
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
3.03 µl ddH2O
=20 µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Ligation of PCR57 in pTUM104 and pSB1C3, of PCR 42 in pSB1C3, of PCR 56 in pTUM104

Investigator: Andrea

Aim: Get successful ligated clones of PCR57 in pYES and pSB1C3, of PCR 42 in pSB1C3, of PCR 56 in pYES

Procedure

PCR 42 in pSB1C3 (P133)

Substance Volume
P133 6.7 µl (~50 ng vector dna)
PCR 42 6.3 µl (~3x of n(vector))
T4 ligase
T4 ligase buffer 1 µl
TOTAL =15 µl

PCR 56 in pYES (P375 verdaut)

Substance Volume
P375 verdaut 9.3 µl (~50 ng vector dna)
PCR 56 3.7 µl (~3x of n(vector))
T4 ligase
T4 ligase buffer 1 µl
TOTAL =15 µl

PCR 57 in pYES (P375 verdaut)

Substance Volume
P375 verdaut 9.2 µl (~50 ng vector dna)
PCR 57 3.8 µl (~3x of n(vector))
T4 ligase
T4 ligase buffer 1 µl
TOTAL =15 µl

PCR 57 in pSB1C3 (P133)

Substance Volume
P133 1.6 µl (~50 ng vector dna)
PCR 57 11.45 µl (~3x of n(vector))
T4 ligase
T4 ligase buffer 1 µl
TOTAL =15 µl
  • incubation at RT for 1 hour
  • afterwards transformation
  • rest of ligation incubated over night at 16 °C

Transformation into E.coli (ligation 28.8.)

Investigator: Andrea

Aim: Transform E.coli XL 1 blue with ligation products of ligation 28.8.

Transformations:

1. PCR57 (digested 7th August) in pYES (P375, digested 23th August)

2. PCR57 (digested 7th August) in pSB1C3 (P133)

3. PCR 42 (digested 7th August) in pSB1C3 (P133)

4. PCR 56 (digested 7th August) in pYES (P375, digested 23th August)

Transformation into E.coli Xl1-Blue

  • thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • adding of 1 µl of DNA (positive plasmids) or of 5 µl of ligation products
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
  • plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133), Ampicillin-plate (pYES, P375)

Colony PCR

Investigator: Lara

Aim: Forward primer of vector backbone and the reverse primer of the insert were used.

  • extension time of PCR reaction was adjusted to the longer PCR product (insert+primers+backbone from primer binding site)
  • annealing temperature was adjusted to lowest primer melting temperature
  • Citrus: 8 clones of PCR42/p133 (4 clones transformation of 8.8., 4 clones of 27.7.) were picked.
  • Lavendula: 8 clones of PCR57/p133 (trafo 8.8.), 8 clones PCR57/p175 (transformation of August 17th) and 8 clones of PCR56/p175 (trafo 8.8.) were picked.
  • positive control: clones PCR2/p133, PCR58/p133, PCR58/pYES
  • negative controls: ddH2O

Citrus in pYES (PCR43/p133)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O68
0.5 µl 10 µM O30
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Lavendula in pSB1C3 (PCR57/p133)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O68
0.5 µl 10 µM O37
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL

Lavendula in pYES (PCR56/p175 and PCR57/p175)

volume reagent
5 µl 5x OneTaq Standard Reaction Buffer
0.5 µl 10 mM dNTPs
0.5 µl 10 µM O8
0.5 µl 10 µM O37
0.13 µl OneTaq Hot Start DNA Polymerase
18.37 µl dd water
25 µL TOTAL
  • PCR program:
Initial denaturation 95 °C 10 min
30 cycles 95 °C 30 s
50 °C 30 s
68 °C 2 min
Final extension 68 °C 5 min
Hold 4 °C

Labels:

1-8: PCR42/pSB1C3 (1-4: 8.8.; 5-8: 27.7.)

9-16: PCR57/pSB1C3

17-24: PCR57/p175

25-32: PCR56/p175

33: Negative control: ddH2O 34: PCR2/p133 35: PCR58/p133 36: PCR58/pYES

TUM12 LS analytcolonyPCR12.png TUM12 LS analytcolonyPCR13.png

Gelelectrophoresis still needs to be done

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Transfer of a certain amount of transformed Saccharomyces cerevisiae cells from yesterday to new medium for protein expression in yeast

  • Resuspended Saccharomyces cerevisiae cells in 15 ml SCU medium with glucose growed successful
  • Measurement: OD600 = 1.8 (used OD600 = 0.4)
  • 10 ml of resuspended S. cerevisiae were added to 40 ml SCU medium with glucose for reaching OD600 = 0.4
  • Incubation at 30 °C overnight

Plasmid isolation of pTUM104_Insert containing over night cultures

Investigator: Roman

Aim of the experiment: Isolation of plasmids pTUM104_CaXMT1, pTUM104_CaMXMT1 and pTUM104_CaDXMT1 to be able to repeat yeast transformation

Operational sequence: Plasmid isolation was performed with the Quiagen Miniprep Kit as described in the manufacturers protocoll. Three over night cultures of each plasmid had been prepared on the day before. They had been established of three colonies of each plate, named Y1E-G, Y2E-G and Y3E-G. Elution was made with 40µl elution buffer, heated up to 37°C and 1 minute incubation before the final centrifugation step.

Concentrations: Concentration was measured with NanoDrop:

  • Y1E: 230,7 ng/µl
  • Y1F: 164,5 ng/µl
  • Y1G: 290,6 ng/µl
  • Y2E: 181,2 ng/µl
  • Y2F: 91,8 ng/µl
  • Y2G: 191,0 ng/µl
  • Y3E: 98,9 ng/µl
  • Y3F: 181,5 ng/µl
  • Y3G: 157,1 ng/µl

Control digest of isolated pTUM104_Insert plasmids with Xba1 and Pst1-HF

Investigator: Roman

Aim of the experiment: Test of isolated plasmids, wether they are containing the right inserts (CaXMT1, CaMXMT1 and CaDXMT1).

Operational sequence:

Reaction batch:

reagent volume
Plasmid template 5µl
Buffer NEB 4 2µl
BSA 100x 0,2µl
RE Xba1 0,25µl
RE Pst1-HF 0,25µl
ddH2O 12,3
TOTAL 20µl

The reaction batch was incubated at 37°C for about 1,5 h, beeing followed by an analytical gel electrophoresis.

Analytical gelelectrophoresis of digested plasmids

Investigator: Roman

Aim of the experiment: Proof of the expected inserts

Operational sequence: The whole amount of the reaction batch (restriction digest, 20µl, see above) was load on gel after having mixed the samples with 2 µl of 10x loading dye.

Expected lengths of the inserts: ca. 1200bp (all three genes have almost the same length).

TUM12 20120828KontrollverdauY1-3,E-G.jpg

From left to right:

DNA Ladder Y1E Xba1/Pst1 Y1F Xba1/Pst1 Y1G Xba1/Pst1 Y2E Xba1/Pst1 Y2F Xba1/Pst1 Y2G Xba1/Pst1 Y3E Xba1/Pst1 Y3F Xba1/Pst1 Y3G Xba1/Pst1 DNA Ladder

Result: All the newly picked colonies show the right, expected insert. Clones Y1G, Y2G and Y3G will be used for the repetition of the yeast transformation.

Repetition of yeast transformation

Investigator: Roman

Aim of the experiment: Transformation of yeast cells (INVSCN1) with the plasmids pTUM104_CaXMT1, pTUM104_CaMXMT1 and pTUM104_CaDXMT1, as well as pTUM104_eGFP (positive controll).

Operational sequence:

The yeast transformation was performed as described in the pYES2 manual of Invitrogen (see small scale yeast transformation), using an over night culture of INVSC1- yeast cells. The solutions 1xTE and 1xLiAc/40% PEG 3350/1xTE were made immediately before use.

  • 1xTE:

5µl of 10x TE were mixed with 45µl ddH2O and sterile filtrated.

  • 1xLiAc/40% PEG 3350/1xTE

At first, 3,5g PEG 3350 were dissolved in 7ml of bidestillated water, resulting in a 50% PEG solution. 6,4ml of this 50% PEG solution were mixed with 800µl 10xTE and 800µl 10x LiAc and sterile filtrated.

Used amount of vector DNA:

  • Y1G (p554): 4µl (ca. 1,1µg)
  • Y2G (p555): 6µl (ca. 1,1µg)
  • Y3G (p556): 6,5µl (ca. 1µg)
  • eGFP: 5 µl (ca. 1µg)

Negative controll: water used

At last, the cells were plated on appropriate agar- plates with SC -Ura medium and incubated at 30°C for the next three days. Colonies should be visible on friday.

Yeast transformation with p542 and p549

Investigator: Roman

Aim of the experiment: Transformation of yeast cells (INVSC1) with the plasmids p542 and p549

Operational sequence:

The yeast transformation was performed as described in the pYES2 manual of Invitrogen (see small scale yeast transformation), using an over night culture of INVSC1- yeast cells. The solutions 1xTE and 1xLiAc/40% PEG 3350/1xTE were made immediately before use.

  • 1xTE:

5µl of 10x TE were mixed with 45µl ddH2O and sterile filtrated.

  • 1xLiAc/40% PEG 3350/1xTE

At first, 3,5g PEG 3350 were dissolved in 7ml of bidestillated water, resulting in a 50% PEG solution. 6,4ml of this 50% PEG solution were mixed with 800µl 10xTE and 800µl 10x LiAc and sterile filtrated.

Used amount of vector DNA:

  • p542: 5µl
  • p549: 13µl

Positive controll: eGFP (see caffeine group) Negative controll: water used

At last, the cells were plated on appropriate agar- plates with SC -Ura medium and incubated at 30°C for the next three days. Colonies should be visible on friday.

Preparation of over night cultures for yeast expression

Investigator: Roman

Aim of the experiment: Expression of enzymes CaXMT1, CaMXMT1 and Protein eGFP in yeast.

Operational sequence:

To express the gene products, a single yeast colonie (transformation was performed on last wednesday) of each plate was used for inoculation of 15ml SC -URA 2% glucose medium. However, there was no colony of a pTUM104_CaDXMT1 transformant (repetition of transformation is already in progress). Incubation was performed at 30°C over night and 180 rpm.

Preparation of over night cultures of positive sequenced clones B1B, B2A and B3D for plasmid isolation and stock generation

Investigator: Dennis

Aim of the experiment: The sequencing of the named clones was positive. Thus, a small amount (has been stored in the fridge for a few days, i.e. a rest of the last over night culture) of each clone was used for inoculation of 8ml LB medium containing chloramphenicol (8µl). Incubation was performed at 37°C over night at 180 rpm.

Wednesday, August 29th

Preparative digestion of GFP (P567), Limonesynthase (P509), ADH-P (720 bp) (P565)

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
3 µl PstI-HF (NEB)
3 µl XbaI (NEB)
6 µl NEB-4 buffer
0,6 µl 100 x BSA (NEB)
47,4 µl dd H20
=60 µl TOTAL
  • To 20 µl reaction batch 20 µl of plasmid with insert were added
  • Digestion was performed at 37C for 3 hours

20120829 Präp. Verdau ADH1-P (720bp), Limonensyn.png

Ligation of TEF2-P in psb1c3 with Thaumatin P467

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
0,54 µl (=100 ng) P492
4,46 µl P467
1 10x T4-ligase buffer
3,5 µl dd H20
=10µl TOTAL
  • Ligation was performed for 1h at room temperature

Ligation of TEF1-P in psb1c3 with Thaumatin P467

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
0,87 µl (=100 ng) P493
4,93 µl P467
1 10x T4-ligase buffer
2,7 µl dd H20
=10µl TOTAL
  • Ligation was performed for 1h at room temperature

Ligation of ADH1-P in psb1c3 with Thaumatin P467

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
2,25 µl (=100 ng) P494
4,45 µl P467
1 10x T4-ligase buffer
1,8 µl dd H20
=10µl TOTAL
  • Ligation was performed for 1h at room temperature

Ligation of psb1c3 P132 with Thaumatin P467

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
1,49 µl P132
6,51 µl P467
1 10x T4-ligase buffer
1,8 µl dd H20
=10µl TOTAL
  • Ligation was performed for 1h at room temperature

Ligation of Cyc1-T (P130) in psb1c3 (P132)

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
6,51 µl P130
1,49 µl P132
1 10x T4-ligase buffer
0,5 µl dd H20
=10µl TOTAL
  • Ligation was performed for 1h at room temperature

Ligation of TEF1-T in psb1c3 P132

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
0,5 µl T4-Ligase (1u/µl)
1,49 µl P132
4,51 µl PCR62
1 10x T4-ligase buffer
2,5 µl dd H20
=10µl TOTAL
  • Ligation was performed for 1h at room temperature

Gelextraction of digested (Xba+PST-HF) ADH-P, GFP, Limonens. and psb1c3 (P577)

Investigator: Georg Procedure:

  • Gelextraction was performed according to Quiaquick extraction protocoll

Transformation of E.coli Xl1-blue with ligation batch (1h) psb1c3 with Thaumatin, Cyc1-T, TEF1-T and Thaumatin with P492,P493 and P494

Investigator: Georg Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on Chloramphenicole plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Transformation of E. coli XL1-Blue with ligation product P399+P552

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P399+P552 for the construction of N'-SV40NLS-PhyB(908NT)-20aaLinker-Gal4DBD-C'.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P399+P552) and it's negative control (P399 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.
  • Incubation at 37 °C overnight.

Preperative digestion and gelelectrophoresis of P473 and p556

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P473 and p556

Procedure:

  • Reaction batch for preperative digestion of P473 with XbaI+PstI-HF
volume reagent
20 µl P473
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for preperative digestion of P556 with XbaI+PstI-HF
volume reagent
20 µl P556
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Preperative digestion was performed for 2.5 h at 37 °C.
  • 4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • Preperative gelelectrophoresis was perforemd at 70 V for 1.5 h.
100 bp DNA ladder P473 (XbaI+PstI-HF) P556 (XbaI+PstI-HF) 1 kbp DNA ladder
Digested Backbone (lower band!) was cut out Digested Backbone pYESnew without promoter was cut out

TUM12 20120829 prep gel P473 P556.jpg

  • The gel oucuts were undergone a gel extraction with the gel extraction kit from Qiagen.

Cycled ligation of P571+PCR72

Investigator: Jeff

Aim of the experiment: Cycled ligation was performed for P571+PCR72 and it's negative control P571 NK.

Procedure:

  • Ligation batch for P571+PCR72
volume reagent
2.54 µl P571 (39.3 ng/µl, 2048 bp)
5.19 µl PCR72 (23.2 ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
9.27 µl ddH2O
=20 µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Transformation of E. Coli with ligation products

Investigator: Martin

Aim of the experiment:Transform E.coli XL 1 blue with ligation products of ligation 28.8.

Transformations:

1. PCR57 (digested 7th August) in pSB1C3 (P133)

3. PCR 42 (digested 7th August) in pSB1C3 (P133)

Transformation into E.coli Xl1-Blue

   thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
   adding of 1 µl of DNA (positive plasmids) or of 5 µl of ligation products
   incubation for 30 min on ice
   heat shock for 5 min at 37 °C
   adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
   plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133)

Small Scale Yeast Transformation - Preparatory culture

Investigator: Martin, Alois

Aim: Preculture of S. cerevisiae according to pYes2_manuel_kommentiert.

1. Inoculate 4 ml of YPD medium with a colony of S. cerevisiae and shake well overnight at 30 °C.

Results:

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Transfer of a certain amount of transformed Saccharomyces cerevisiae cells from yesterday to new medium with galactose for protein expression in yeast

  • Measurement: OD600 = 1.9 (used OD600 = 0.4)
  • 10.5 ml of resuspended S. cerevisiae were added to 39.5 ml SCU medium with galactose for reaching OD600 = 0.4
  • Incubation at 30 °C overnight

Picking of colonies

Investigator: Andrea

Procedure:

  • Picking of 6 clones each of PCR56 pYES and PCR57 pYES (transformation 28th August)
  • Inbucation at 37°C (shaker) over night.

Picking of Integrationvector_mOrange

Investigator: Martin

Aim:To gain a stock of plasmids in order to integrate biobricks into yeast genome

Procedure: Pick a clone from the plate, put it into 7 ml LB-medium (7 µl Ampicillin added) and incubate over night.

Sequencing

Investigator: Lara

Aim: Repetition of sequencing to check whether insert is wrong. This time, p546 (PCR56/p133)and p512 (PCR58/p133) were sequenced. Furthermore, p550 (PCR58/pYES) was sequenced.

  • p133: Primer VF2
  • pYES: Primer T7

Yeast expression Part 1

Investigator: Roman

Aim: Induction of protein expression of CaXMT1, CaMXMT1 and eGFP

Operational sequence:

At first, the OD600 of the over night cultures were measured:

  • CaXMT1: 4,4/ml
  • CaMXMT1: 3,9/ml
  • eGFP: 4,5/ml

(1/10 dilutions have been prepared for measurment)

To obtain an OD of 0,4/ml in 50ml of SC -URA 2% gal medium, 4,5ml, 3,9ml and 4,5ml of the over night cultures were centrifuged at 1500xg for minutes at 4°C. Afterwards, the pellet was resuspended in 2ml SC -URA 2% gal. The suspension was then given to 48ml SC -URA 2% gal medium, followed by incubation at 180rpm and 30°C.

Afterwards, 5ml samples were taken of each culture after incubation times of 20min, 140 min and 320 min. The samples were first stored in the fridge and then centrifuged at 1500xg and 4°C for 5 minutes. After washing with 500µl sterile water, the pellet was stored at -80°C until further usage (cell lysis). Furthermore, the OD600 was measured:

After 20 min:

  • CaXMT1: 0,41
  • CaMXMT1: 0,40
  • eGFP: 0,42

After 140 min:

  • CaXMT1: 0,43
  • CaMXMT1: 0,42
  • eGFP: 0,45

After 320 min:

  • CaXMT1: 0,5
  • CaMXMT1: 0,45
  • eGFP: 0,5

Preparation of glycerol stocks of positive sequenced pSB1C3_Insert clones

Investigator: Roman

Operational sequence: 750µl of each of the three over night cultures with pSB1C3_CaXMT1 (clone B1B), pSB1C3_CaMXMT1 (clone B2A) and pSB1C3 (clone B3D) were mixed with 250µl glycerol and stored at -80°C (in the box of the competent XL1-blue cells).

Sequencing of newly prepared pTUM104_RFC25_Insert plasmids (clones: Y1G, Y2G, Y3G)

Investigator: Roman

Aim: Proof of inserted sequence (former sequencing failed)

Results:

  • pTUM104_CaXMT1 with T7 primer

GCCGCTTCTAGAGTACACAATGTCTTTACAAGAAGTCTTGAGAATGAACGGTGGTGAAGGTGATACTTCTTACGCTAAAA ACTCCGCCTACAATCAATTGGTTTTGGCTAAAGTTAAGCCAGTCTTGGAACAATGCGTCAGAGAATTATTGAGAGCTAAC TTGCCAAACATCAACAAGTGCATTAAGGTTGCTGATTTGGGTTGTGCTTCTGGTCCAAATACTTTGTTGACTGTTAGAGA CATCGTCCAATCCATTGATAAGGTTGGTCAAGAAAAGAAGAACGAATTGGAAAGACCAACCATCCAAATTTTCTTGAACG ACTTGTTCCCAAACGACTTCAACTCTGTTTTTAAGTTGTTGCCATCCTTCTACAGAAAGTTGGAAAAAGAAAACGGTAGA AAGATCGGTTCCTGTTTGATTGGTGCTATGCCAGGTTCTTTCTACTCCAGATTATTTCCTGAAGAATCCATGCATTTCTT GCACTCTTGTTATTGCTTGCAATGGTTGTCTCAAGTTCCATCTGGTTTGGTTACTGAATTGGGTATTTCTACCAACAAGG GTTCCATCTACTCTTCTAAAGCTTCAAGATTGCCAGTTCAAAAGGCCTACTTGGATCAATTCACTAAGGATTTCACCACC TTTTTGAGAATCCACTCCGAAGAATTATTCTCCCACGGTAGAATGTTGTTGACCTGTATATGTAAGGGTGTTGAATTGGA TGCTAGAAACGCCATTGATTTGTTGGAAATGGCTATCAACGATTTGGTTGTTGAAGGTCACTTAGAAGAAGAAAAGTTGG ACTCTTTCAACTTGCCAGTTTACATTCCATCTGCCGAAGAAGTTAAGTGCATCGTTGAAGAAGAAGGTTCCTTCGAAATC TTGTACTTGGAAACTTTCAAGGTCTTGTACGATGCCGGTTTCTCTATTGATGATGAACATATTAAGGCCGAATACGTTGC CTCTTCTGTTAGAGCTGTTTACGAACCTATTTTGGCTTCTCATTTCGGTGAAGCC

  • pTUM104_CaXMT1 with reversed primer

GCGTGATGTAGCGTGACATAACTAATTACATGATGCGGCCCTCTAGTCTGCAGCGGCCGCTACTAGTATCATCACTTTTC GAATTGTGGATGTGACCAAGCAGAAACATCAGACTTTTCTGGCTTTTTGGCCAAGGAGATGATCAAGTTGTTGTAAAAAC CTTTACCCAATGGCAAAACCTTAGCAGCGTGCTTAGCAAATCTATGAAAGATATCTGGGATAATGGCTTCACCGAAATGA GAAGCCAAAATAGGTTCGTAAACAGCTCTAACAGAAGAGGCAACGTATTCGGCCTTAATATGTTCATCATCAATAGAGAA ACCGGCATCGTACAAGACCTTGAAAGTTTCCAAGTACAAGATTTCGAAGGAACCTTCTTCTTCAACGATGCACTTAACTT CTTCGGCAGATGGAATGTAAACTGGCAAGTTGAAAGAGTCCAACTTTTCTTCTTCTAAGTGACCTTCAACAACCAAATCG TTGATAGCCATTTCCAACAAATCAATGGCGTTTCTAGCATCCAATTCAACACCCTTACATATACAGGTCAACAACATTCT ACCGTGGGAGAATAATTCTTCGGAGTGGATTCTCAAAAAGGTGGTGAAATCCTTAGTGAATTGATCCAAGTAGGCCTTTT GAACTGGCAATCTTGAAGCTTTAGAAGAGTAGATGGAACCCTTGTTGGTAGAAATACCCAATTCAGTAACCAAACCAGAT GGAACTTGAGACAACCATTGCAAGCAATAACAAGAGTGCAAGAAATGCATGGATTCTTCAGGAAATAATCTGGAGTAGAA AGAACCTGGCATAGCACCAATCAAACAGGAACCGATCTTTCTACCGTTTTCTTTTTCCAACTTTCTGTAGAAGAT

  • pTUM104_CaMXMT1 with T7 primer

GCGCTTCTAGAGTACACAATGTCTTTACAAGAAGTCTTGCACATGAACGAAGGTGAAGGTGATACTTCTTACGCTAAGAA TGCTTCTTACAACTTGGCTTTGGCTAAGGTTAAGCCATTCTTGGAACAATGCATCAGAGAATTATTGAGAGCCAACTTGC CAAACATCAACAAGTGTATTAAGGTTGCTGATTTGGGTTGTGCTTCTGGTCCAAATACTTTGTTGACTGTTAGAGACATC GTCCAATCCATTGATAAGGTTGGTCAAGAAGAAAAGAACGAATTGGAAAGACCAACCATCCAAATTTTCTTGAACGACTT GTTCCAAAACGACTTCAACTCCGTTTTTAAGTTGTTGCCATCCTTCTACAGAAAGTTGGAAAAAGAAAACGGTAGAAAGA TCGGTTCCTGCTTGATTTCTGCTATGCCAGGTTCTTTTTACGGTAGATTATTCCCTGAAGAATCCATGCATTTCTTGCAC TCTTGTTACTCTGTTCACTGGTTGTCTCAAGTTCCATCTGGTTTGGTTATTGAATTGGGTATTGGTGCTAACAAGGGTTC CATCTATTCTTCTAAAGGTTGTAGACCACCAGTTCAAAAGGCTTACTTGGATCAATTCACTAAGGACTTCACCACTTTCT TGAGAATCCACTCCAAAGAATTATTCTCCAGAGGTAGAATGTTGTTGACCTGTATCTGTAAGGTTGACGAATTTGATGAA CCTAACCCATTGGATTTGTTGGATATGGCCATTAACGATTTGATCGTCGAAGGTTTGTTGGAAGAAGAAAAGTTGGACTC CTTCAACATTCCATTCTTTACTCCATCTGCCGAAGAAGTTAAGTGCATCGTTGAAGAAGACGTTCTTGCGAAATCTTGTA CTTGGAAACTTTCAAGGCTCATTACGATGCTGCCTTCTCTATTGATGATGATTACCCAGTTAGATCCCACGAACAAATCA AGCTGAT

  • pTUM104_CaMXMT1 with reversed primer

CGTGATGTAGCGTGACATAACTAATTACATGATGCGGCCCTCTAGTCTGCAGCGGCCGCTACTAGTATCATCACTTTTCG AATTGTGGATGTGACCAAGCAGAAACATCAGACTTTTCTGGCTTTTTGGCCAAGGAGATAATCAAGTTGTTGTAACAACC CTTACCCATGTGTAAAACCTTAGCAGCATGTTTAGCCAATCTGTGAAACAAATCTGGCATAATAGCTTCACCGAAATGAG AGGCCAAAATAGGTTCGTAAACAGATCTGATCAAGGAGGCAACGTATTCAGCTTTGATTTGTTCGTGGGATCTAACTGGG TAATCATCATCAATAGAGAAGGCAGCATCGTAATGAGCCTTGAAAGTTTCCAAGTACAAGATTTCGCAAGAACCTTCTTC TTCAACGATGCACTTAACTTCTTCGGCAGATGGAGTAAAGAATGGAATGTTGAAGGAGTCCAACTTTTCTTCTTCCAACA AACCTTCGACGATCAAATCGTTAATGGCCATATCCAACAAATCCAATGGGTTAGGTTCATCAAATTCGTCAACCTTACAG ATACAGGTCAACAACATTCTACCTCTGGAGAATAATTCTTTGGAGTGGATTCTCAAGAAAGTGGTGAAGTCCTTAGTGAA TTGATCCAAGTAAGCCTTTTGAACTGGTGGTCTACAACCTTTAGAAGAATAGATGGAACCCTTGTTAGCACCAATACCCA ATTCAATAACCAAACCAGATGGAACTTGAGACAACCAGTGAACAGAGTAACAAGAGTGCAAGAAATGCATGGATTCTTCA GGGAATAATCTACCGTAAAAAGAACCTGGCATAGCAGAATCAAGCAGGAACCGATCTTTCTACCGTTTTCTTTTTCCAAC TTTCTGTAGAAGGATGGCAACAACTTAAAAACGGAGTTGAAGTCGTTTTGGACAAGTCGTTCAGAAAATTTGGATGGTTG GTCTTTCCATTCGTTCTTTCTTCTTGACCAACCTTA

  • pTUM104_CaDXMT1 with T7 primer

CGGCCGCTTCTAGAGTACACAATGTCTTTACAAGAAGTCTTGCATATGAACGGTGGTGAAGGTGATACTTCTTACGCTAA GAACTCTTTCTACAACTTGTTCTTGATCAGAGTCAAGCCAATCTTGGAACAATGCATCCAAGAATTATTGAGAGCCAACT TGCCAAACATCAACAAGTGTATTAAGGTTGCTGATTTGGGTTGTGCTTCTGGTCCAAATACTTTGTTGACTGTTAGAGAC ATCGTCCAATCCATTGATAAGGTTGGTCAAGAAAAGAAGAACGAATTGGAAAGACCAACCATCCAAATTTTCTTGAACGA CTTGTTCCAAAACGACTTCAACTCCGTTTTTAAGTCCTTGCCATCCTTCTACAGAAAGTTGGAAAAAGAAAACGGTAGAA AGATCGGTTCCTGTTTGATTGGTGCTATGCCAGGTTCTTTTTACGGTAGATTATTCCCTGAAGAATCCATGCATTTCTTG CATTCTTGTTACTGCTTGCACTGGTTGTCTCAAGTTCCATCTGGTTTGGTTACTGAATTGGGTATTTCTGCTAACAAGGG TTGCATCTACTCTTCTAAAGCTTCAAGACCACCAATTCAAAAGGCCTACTTGGATCAATTCACTAAGGATTTCACCACTT TCTTGAGAATCCACTCCGAAGAATTGATCAGTAGAGGTAGAATGTTGTTGACCTGGATCTGCAAAGAAGATGAATTTGAA AACCCAAACTCCATCGATTTGTTGGAAATGTCCATCAACGATTTGGTTATCGAAGGTCACTTAGAAGAAGAAAAGTTGGA CTCTTTCAACGTTCCAATCTATGCTCCATCTACCGAAGAAGTTAAGTGCATCGTTGAAGAAGAAGGTTCCTTCGAAATCT TGTACTTGGAAACCTTTAAAGTTCCATACGATGCCGGTTTCTCTATCGATGATGATTATCAAGGTAGATCCCACTCTCCA GTTTCTTGTGATGAACATGCTAGAGCTGCTCATGTTGCTTCAGTTGTAGAT

  • pTUM104_CaDXMT1 with reversed primer

CGTGATGTAGCGTGACATAACTAATTACATGATGCGGCCCTCTAGTCTGCAGCGGCCGCTACTAGTATCATCACTTTTCG AATTGTGGATGTGACCAAGCAGAAACATCGGACTTTTCTGGCTTTTTGGCCAAGGAAATAATCAAGGAGTCGTAAAAACC CTTACCAGATCTCAAAACCTTGGCAGCATTCTTAGCAATTCTATGGGACAAATCTGGCATAATAGCTTCACCGAAATGAG AGGCAACGATAGGTTCGAAAATAGATCTAACAACTGAAGCAACATGAGCAGCTCTAGCATGTTCATCACAAGAAACTGGA GAGTGGGATCTACCTTGATAATCATCATCGATAGAGAAACCGGCATCGTATGGAACCTTAAAGGTTTCCAAGTACAAGAT TTCGAAGGAACCTTCTTCTTCAACGATGCACTTAACTTCTTCGGTAGATGGAGCATAGATTGGAACGTTGAAAGAGTCCA ACTTTTCTTCTTCTAAGTGACCTTCGATAACCAAATCGTTGATGGACATTTCCAACAAATCGATGGAGTTTGGGTTTTCA AATTCATCTTCTTTGCAGATCCAGGTCAACAACATTCTACCTCTACTGATCAATTCTTCGGAGTGGATTCTCAAGAAAGT GGTGAAATCCTTAGTGAATTGATCCAAGTAGGCCTTTTGAATTGGTGGTCTTGAAGCTTTAGAAGAGTAGATGCAACCCT TGTTAGCAGAAATACCCAATTCAGTAACCAAACCAGATGGAACTTGAGACAACCAGTGCAAGCAGTAACAAGAATGCAAG AAATGCATGGATTCTTCAGGGAATAATCTACCGTAAAAAGAACCTGGCATAGCACCAATCAAACAGGAACCGATCTTTCT ACCGTTTTCTTTTTCCAACTTTCTGTAGAAGGATGGCAAGGACTTAAAAACGGAGTTGAAGTCGTTTTGGAACAGTCGTT CAGAAAATTTGGATGGTTGGTCTTTCCAATTCGTTCTTCTTTCTTGACCACCTTATCAATGGATTGGACGATGTCTCTAA C

Conclusion:

The sequencing has worked and the sequences are right. These clones will be used for the further experiments (yeast transformation, expression, etc.)

Miniprep of B2A,B1B,B3D

Investigator: Dennis

Aim: Miniprep of over night cultures with number B2A, B1B, B3D (clones were isolated of overnightculture, 5ml LB-medium with CHLP).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Preperative digestion of B2A, B1B, B3D

Investigator: Dennis

Aim of the experiment: digestion of pSB1C3_CaXMT1 (clone B1B), pSB1C3_CaMXMT1 (clone B2A) and pSB1C3 (clone B3D) Procedure:

  • Reaction batch:
volume reagent
40 µl B1B, B2A, B3D
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
2,5 µl ddH2O
=50 µl TOTAL

Preperative Gelelectrophoresis of pSB1C3_CaMXMT1

Investigator: Dennis

  • 4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • Preperative gelelectrophoresis was perforemd at 90 V for 1 h.
1 kbp DNA ladder pSB1C3_CaMXMT1 (clone B2A) pSB1C3_CaMXMT1 (clone B1B)

20120829 präpGelB2A B1B Dennis.JPG

  • Digested Inserts B1B, B2A was cut out (lower band!- ca1200bp)
1 kbp DNA ladder pSB1C3_CaMXMT1 (clone B3D)

20120829 präpGelC Dennis.jpg

  • Digested Insert B2D was cut out (lower band!- ca1200bp)

Gelextraction

Investigator:Dennis

  • Gelextraction of B2A, B1B, B3D was performed according to Quiaquick gel extraction protocol
  • following concentrations were detected by Nanodrop:
  • B2A ==> 13,6 ng/µl
  • B1B ==> 12,8 ng/µl
  • B2D ==> 8,4 ng/µl

Cycled ligation of P492+B2A, P4492+B1B, P493+B3D

Investigator: Dennis

Aim of the experiment: Cycled ligation was performed for P492 (Konz: 91 ng/µl), P493 (Konz: 57 ng/µl)

Procedure:

  • Ligation batch for P492+B2A
volume reagent
2  µl P492 (91 ng/µl, 2048 bp)
16,5  µl B2A (13,5  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
=21 µl TOTAL
  • Ligation batch for P492+B1B
volume reagent
2  µl P492 (91 ng/µl, 2048 bp)
16,5  µl B1B (12,4  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
=21 µl TOTAL
  • Ligation batch for P493+B3D
volume reagent
1,25  µl P493 (91 ng/µl, 2048 bp)
17,5  µl B3D (8,4  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
=20 µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Gelelectrophoresis of colony pcr products

Investigator: Lara

Aim: Check products of colony pcr whether there are positive clones.

Results: See pictures that were uploaded into lab journal entry of colony pcr (august 28th).

--> Positive clones were transferred into 4 ml of LB medium with antibiotic (Chlp -> pSB1C3)

--> please prep plasmid DNA and do an analytical restriction digest

Thursday, August 30th

Miniprep of picked colonies from E.coli transformed with TEF2-P in psb1c3 from P451

Investigator: Georg

  • Miniprep was performed according Quiaprep plasmid extraction kit

Preparative digestion of TEF2-psb1c3 clones P588 and P591

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
2 µl PstI-HF (NEB)
2 µl XbaI (NEB)
8 µl NEB-4 buffer
0,8 µl 100 x BSA (NEB)
29,2 µl dd H20
=40µl TOTAL
  • To 20 µl reaction batch 20 µl plasmid-DNA was added
  • Digestion was performed for 3 h at 37C

20120830 TEF2-P ausgeschn mit xbaI und PstI.png

Gelextraction of digested TEF2-P

Investigator:Georg

  • Gelextraction was performed according to Quiaquick gel extraction protocoll

Nanodrop measurement of digested limonensynthases, GFP, ADH1-P, TEF2-P

Investigator: Georg

  • P578 Limonens.: 36,7 ng/µl
  • P576 GFP: 15,7 ng/µl
  • P575 ADH-P: 11,2 ng/µl
  • P588 TEF2-P: 289,7 ng/µl
  • P589 TEF2-P: 225,1 ng/µl
  • P590 TEF2-P: 260,5 ng/µl
  • P591 TEF2-P: 433,2 ng/µl
  • P592 TEF2-P (Preparative digestion (XBAI+PSTI-HF)): 50 ng/µl

Ligation of P494 and P567

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
4,52 µl (=100 ng) P494
4,88 µl (=100 ng) P567
2 10x T4-ligase buffer
7,6 µl dd H20
=20µl TOTAL
  • Ligation was performed 1h at room temperature

Ligation of P492 and P567

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,08 µl (=100 ng) P492
4,92 µl (=100 ng) P567
2 10x T4-ligase buffer
11 µl dd H20
=20µl TOTAL
  • Ligation was performed 1h at room temperature

Ligation of P493 and P567

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,73 µl (=100 ng) P493
5,37 µl (=100 ng) P567
2 10x T4-ligase buffer
9,9 µl dd H20
=20µl TOTAL
  • Ligation was performed 1h at room temperature

Gelextraction of digested TEF2-P (XbaI+PstI)

Investigator:Georg

  • Gelextraction was performed according to Quiaquick gelextraction-kit

Preparation of new Chloramphenicole plates

Investigator: Georg

  • To 2 L of LB-Medium 15 g Agar was added
  • The mixture was then autoclaved
  • 2 ml 1000x Chloramphenicole was given when temperature has cooled down properly
  • Agar was distributed to plates and then stored in the cooler

Transformation of E. coli XL1-Blue with ligation product P571+PCR72

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P571+PCR72 for bricking the fusion protein of N'-SV40NLS-Gal4AD-Linker-Pif3-C'.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P571+PCR72) and it's negative control (P571) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.
  • Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with ligation products of P399+P552

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P399+P552.

Procedure:

  • 6 colonies of the transformation with P399+491 (CamR) and 10 colonies of the transformation with P399+P552 (CamR) were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of E. coli XL-Blue cells, transformated with P20 (BBa_J04450 in pSB1C3)

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with P20 (BBa_J04450 in pSB1C3), in order to introduce RFC25 pre- and suffix by PCR to the RFP generator device as a helper construct for cloning with RFC25/RFC10 parts.

Procedure:

  • 4 colonies of the transformation with P20 (CamR) and were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and 4 µl of chloramphenicol (1000x). These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Design of an minimal multiple cloning site to insert protein coding part between promoter and terminator for pTUM104new-without-promoter and pSB1C3

Investigator: Jeff

  • Ask me if you want to use constitutive promoter and terminator for express your target enzyme or protein or you want to integrate your coding device into the genome!! (Jeff)

TUM12 mMCS design.jpg

Cycled ligation of P572 with P299, P575, P592, PCR59

Investigator: Jeff

Aim of the experiment: Ligation of TEF1-P, TEF2-P, ADH1-P in pYES2-TUM

Procedure:


Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,12 µl (=100 ng) P572
2 10x T4-ligase buffer
2,08 µl P299
12,3 µl dd H20
=20µl TOTAL

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,16 µl P572
2 10x T4-ligase buffer
3,84µl P575
10 µl dd H20
=20µl TOTAL

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,13 µl P572
2 10x T4-ligase buffer
3,27µl PCR59
10,5 µl dd H20
=20µl TOTAL

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,18 µl P572
2 10x T4-ligase buffer
0,82 µl P592
13 µl dd H20
=20µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Yeast expression Part 2

Investigator: Roman

Aim of the experiment: Expression of gen products CaXMT1, CaMXMT1 and eGFP

Analogous to yesterday, one more sample of each yeast culture growing in SC -URA 2%gal medium was taken (5ml), 20h and 24h after induction. Furthermore, the OD600 was determined:

20h:

  • CaXMT1: 4,9
  • CaMXMT1: 4,6
  • eGFP: 5,8

24h:

  • CaXMT1: 5,6
  • CaMXMT1: 5,4
  • eGFP: 6,8

The samples were handled as described yesterday and stored at -80°C

Note: At the eGFP pellet is green ==> expression of positive control works

Transformation of E. coli with P492+B1B, P492+B2A, P493+B3D

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of P492+B1B, P492+B2A, P493+B3D.

Procedure:

  • 20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Small scale yeast transformation of S. cerevisiae with pTUM104_Preprothaumatin, Integration-Vector_mOrange and pTUM104_GFP

Investigator: Martin, Alois

Procedure according to pYes2_manual_kommentiert:

  • 2. Determine the OD600 of your overnight culture. Dilute culture to an OD600 of 0.4 in 50 ml of YPD medium, add 5ml 20% glucose and grow an additional 2–4 hours.

3. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 40 ml 1X TE. 4. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 2 ml of 1X LiAc/0.5X TE. 5. Incubate the cells at room temperature for 10 minutes. 6. For each transformation, mix together 1 μg plasmid DNA and 100 μg (10 μl) denatured sheared salmon sperm DNA with 100 μl of the yeast suspension from Step 5. 7. Add 700 μl of 1X LiAc/40% PEG-3350/1X TE (7 ml 50% PEG3350 was synthesized (3.5 g in 7 ml bidest.water); 6.4 ml 50% PEG3350 + 800 μl 10x LiAc + 800 μl 10x TE were mixed) and mix well. 8. Incubate solution at 30°C for 30 minutes. 9. Add 88 μl DMSO, mix well, and heat shock at 42°C for 7 minutes. 10. Centrifuge in a microcentrifuge for 10 minutes and remove supernatant. 11. Resuspend the cell pellet in 1 ml 1X TE and re-pellet. 12. Resuspend the cell pellet in 50–100 μl 1X TE and plate on a selective plate (SCU-plates + Glucose, respectively Kanamycin-YPD plates for the Integration-Vector_mOrange). Incubate the plates at 30°C over the weekend.

Name: pYes2_Thaumatin/Integ-Vek/GFP, S. cerevisiae, Schappert, Bräuer.

Miniprep of Integvek_mOrange

Investigator: Martin, Alois

Aim: To gain enough plasmid to digest with restriction enzymes (and ligate with other inserts than the mOrange) and to transform yeast.

Procedure: Miniprepkit - Qiagen, Procedure according to the manual

Gelextraction of Thaumatin, Limonene-Synthase and Integration-Vector-Backbone

Investigator: Martin, Alois

Aim: P583 (Thaumatin), 584 (Limonene-Synthase), 585 (Integration-vector-backbone)

Procedure: Gelextraction with a 1%-LMP-Agarose-Gel - Qiagen Gelextraction Kit

Picture of Integration-Vector (Backbone at 3650 bp)

20120830 integvek gelex TUM12.jpg

Picture of Thaumatin (721 bp, upper) and Limonene (1650bp, lower)

20120830 limonen thaumatin gelex TUM12.jpg

Ligation of Thaumatin/Limonene and Integration-Vector

Investigator: Martin, Alois

Aim: Ligate the Thaumatin/Limonene as inserts into the Integration-Vector.

Procedure:

  • Ligation batch for P583+P585 and P584+P585
volume reagent
5.5 µl P585 (18,4 ng/µl, 3600 bp)
4.6 µl P583 (13.1 ng/µl, 721 bp) P584 (28.5 ng/µl, 1650 bp)
0,5 µl BSA
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
5.9 µl ddH2O
=21 µl TOTAL


Transformation of E. Coli XL1blu with Integ-Vec_Thaumatin and Integ-Vec_Limonene-Synthase

Investigator: Martin, Alois

Aim: To establish a E. Coli-Strain carrying the Integration-Vector backbone with a Thaumatin, respectively Limonene-Synthase, insert.

Procedure: The products of the Ligation before were used to transform E. Coli XL1blu. For the procedure have a close look at the quadrizillion transformations before. I'm outta here.

Miniprep of ligation products and colony PCR products

Investigator: Andrea

Aim: Check ligation products (PCR56/P375 (pYES), PCR57/P375 (pYES)). Check colony PCR clones (3, 5, 6, 7, 8) .

  • PCR56/pYES (tube 1): 242 ng/µl
  • PCR56/pYES (tube 2): 71 ng/µl
  • PCR56/pYES (tube 3): 63 ng/µl
  • PCR56/pYES (tube 4): 36 ng/µl
  • PCR56/pYES (tube 5): 137 ng/µl
  • PCR56/pYES (tube 6): 63 ng/µl
  • PCR57/pYES (tube 1): 74 ng/µl
  • PCR57/pYES (tube 2): 98 ng/µl
  • PCR57/pYES (tube 3): 124 ng/µl
  • PCR57/pYES (tube 4): 100 ng/µl
  • PCR57/pYES (tube 5): 152 ng/µl
  • PCR57/pYES (tube 6): 85 ng/µl
  • Colony PCR (clone 3): 63.5 ng/µl
  • Colony PCR (clone 5): 101 ng/µl
  • Colony PCR (clone 6): 161.5 ng/µl
  • Colony PCR (clone 7): 61 ng/µl
  • Colony PCR (clone 8): 59 ng/µl

Eppis are stored in a disposal bag (label: Miniprep, Andrea, 30.8.) in the middle drawer of -20°C.

Analytical restriction digest of transformed ligation products and colony PCR products

Investigator: Andrea

Aim: Check that transformed clones are positive.

  • PCR56/pSB1C3 (transformation 28th August)
  • PCR57/pSB1C3 (transformation 28th August)
  • Colony PCR (clone 3, 5, 6, 7, 8)
volume reagent
3 µl plasmid DNA
0.25 µl Xba 1
0.25 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
14.3 µl ddH2O

Gelelectrophoresis:

  • expected:

Limonene synthase 1600 bp

pSB1C3 (P133) 2000 bp

30.ß8.12 analytgel1 bearbeitet.png

30.08.12 analytgel2 bearbeitet.png

ligations negative colony PCR products negative

Preparation of cells of protein expressed yeasts

Investigator: Andrea

Aim of the experiment: Get yeast cell pellets for further cell disruption

  • measure OD600 at different time points (after 15 hours, 20 hours, 24 hours)
  • centrifugation of each 5 ml (4°C, 5 min, 5000x g)
  • resuspend pellet in 1ml ddH2O
  • centrifugation of each resuspended pellet (4°C, 5 min, 5000x g)
  • stored pellet at -20°C

Preparation of PMSF solution

Investigator: Andrea

Aim of the experiment: Get PMSF solution for breaking buffer for yeast expression procedure

  • 0.0174 g in 1ml Isopropanol (techn.)
  • stored Eppi at 4°C (great iGEM fridge)
  • added 60 µl to breaking buffer --> breaking buffer + PMSF ready for yeast cell disruption

Friday, August 31st

Transformation of E.coli with ligation product pTUM100 with PCR59 (TEF1-T), TEF2-P, TEF1-P and ADH1-P

Investigator: Georg Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Picking of colonies with ligation products CYC-T+psb1c3, TEF1-T-psb1c3, Thaumatin+ ADH1-TEF2-TEF1-P

Investigator:Georg


  • 42 colonies were picked and transferred to 5 ml medium with 5 µl 1000x CAM in case of ligation and CYC-T and TEF1-T
  • Ampicillin in case of ligation products of Thaumatin

Miniprep of E. coli XL-Blue cells, transformated with ligation product of P399+P552

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products of P399+P552 (P573).

Procedure:

  • Miniprep was done after manufacturer's protocol. (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of the minipreps P601-P606

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps P601-P606 with XbaI+PstI-HF.

Procedure:

  • Mastermix for analytical digestion for P601-P606 with XbaI+PstI-HF:
volume reagent
14 µl NEBuffer 4 (10x)
1.4 µl BSA (100x)
1.75 µl XbaI (20 U/µl)
1.75 µl PstI-HF (20 U/µl)
103.6 µl ddH2O
=122.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P601-P606).
  • The reaction mixes were incubated at 37 °C for 90 min.
  • 9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).
  • Analytical gelelectrophoresis was performed at 90 V for about 60 min.

P601-P606:

100 bp DNA ladder P601 P602 P603 P604 P605 P606 1 kbp DNA ladder
Ligation seems to be successful. Sequencing has to be done! Ligation seems to be successful. Sequencing has to be done! Ligation seems to be successful. Sequencing has to be done! Ligation seems to be successful. Sequencing has to be done! Ligation seems to be successful. Sequencing has to be done! Ligation seems to be successful. Sequencing has to be done!

TUM12 20120831 anal gel p601-p606.jpg

Picking of E. coli XL-Blue cells, transformated with ligation products of P571+PCR72

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P571+PCR72.

Procedure:

  • 6 colonies of the transformation with P571+PCR72 (CamR) were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of clones: PSB1C3_P57 and PSB1C3_P42

Investigator: Martin, Alois (???)

Aim: Picking of E. coli XL-Blue cells, transformated with ligation products of P113 and P57/P42.

Procedure:

  • 2 colonies of the transformation (29th August) from each plate were taken, 4 in total.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 7 ml of LB-medium and chloramphenicol. These tubes were put in a 180 rpm cell culture shaker at 37 °C overnicht.

Harvest proteins expressed in yeasts

Aim: Cell disruption for harvesting proteins expressed in yeasts

Procedure:

  • resuspending stored cell pellets in defined volume of braking buffer + PMSF
  • adding glass beads to eppis
  • vortex for 30 min and incubate on ice for 30 min (repetition for 25 times)
  • centrifuge at 4 °C, full speed, 10 min
  • take supernatant and centrifuge at 4 °C, full speed, 10 min again
  • store supernatant at -80°C (second box)
  • concentrations

LS (15 hours after galactose induction): 4.053 mg/ml

LS (20 hours after galactose induction): 1.932 mg/ml

LS (24 hours after galactose induction): 4.828 mg/ml

Caffein CaXMT1 (20 hours after galactose induction): 10.142 mg/ml

Caffein CaXMT1 (24 hours after galactose induction): 2.433 mg/ml

Caffein CaMXMT1 (20 hours after galactose induction): 8.508 mg/ml

Caffein CaMXMT1 (24 hours after galactose induction): 4.712 mg/ml

Caffein eGFP (20 hours after galactose induction): 6.661 mg/ml

Caffein eGFP (24 hours after galactose induction): 4.244 mg/ml

Repitition of analytical restriction digest of transformed ligation products and colony PCR products

Investigator: Andrea

Aim: Check that transformed clones are positive.

  • PCR56/pSB1C3 (transformation 28th August)
  • PCR57/pSB1C3 (transformation 28th August)
  • Colony PCR (clone 3, 5, 6, 7, 8)
volume reagent
3 µl plasmid DNA
0.5 µl Xba 1
0.5 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
12.8 µl ddH2O
  • incubation: 2 hours, 37°C

Gelelectrophoresis:

needs to be done

Analytical restriction digest of schwab vectors

Investigator: Andrea

Aim: Check that schwab plasmids and insert are right.

volume reagent
3 µl P40
0.3 µl Nco1
0.3 µl Hind3
2 µl Tango Buffer
11.4 µl ddH2O
volume reagent
3 µl P42
0.3 µl Not1
0.3 µl EcoR1
2 µl Orange Buffer
11.4 µl ddH2O
  • incubation: 2 hours, 37°C
  • digested probes were stored at -20°C (Ingmar)

Gelelectrophoresis:

needs to be done

Preparation of SC-U medium with 2% glucose (2 l) or galactose (2 l) for expression in Saccharomyces cerevisiae

Investigator: Maddin

4 x 1 l medium:

  • One aliquot (50 ml) of amino acids prepared by Alois Bräuer was used
  • 6.7 g yeast nitrogen base
  • 850 ml ELGA water
  • autoclaving

Sugar solution were prepared separately:

  • 40 g glucose were dissolved in 200 ml ELGA water
  • 40 g galactose were dissolved in 200 ml ELGA water
  • autoclaving

After autoclaving:

  • 100 ml of glucose solution were added to 1 l SC-U medium, 2x50 ml were added to 2x500 ml SC-U medium.
  • 100 ml of galactose solution were added to 1 l SC-U medium, 2x50 ml were added to 2x500 ml SC-U medium.

Notes: The media are stored in the shelf above the bench in the iGEM laboratory.

Picking of clones: Integvec_Thaumatin (P585_P583) and Integvec_Limonene-Synthase (P585_P584)

Investigator: Martin, Alois

Aim: Picking of E. coli XL-Blue cells, transformated with ligation products of P585 and P583/P584.

Procedure:

  • 2 colonies of the transformation from each plate were taken, 4 in total.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 7 ml of LB-medium and Ampicillin. These tubes were put in a 180 rpm cell culture shaker at 37 °C overnight.

Saturday, September 1st

Gelextraction of colonies with Cyc-T-TEF1-T+psb1c3 and Thaumatin with ADH1P-TEF2P-TEF1P in pTUM104

Investigator:Georg

  • Gelextraction was done according to Quiaprep-protocol

Analytical digestion of colonies with Cyc-T-TEF1-T+psb1c3 and Thaumatin with ADH1P-TEF2P-TEF1P in pTUM100

Investigator:Georg

  • Reaction batch for digestion:
volume reagent
11,25 µl EcorI-HF (NEB)
11,25 µl PstI-HF (NEB)
90 µl NEB-4 buffer
9 µl 100 x BSA (NEB)
778,5 µl dd H20
=900 µl TOTAL
  • to 2,5 ml of DNA 17,5 µl reaction batch were added
  • Digestion took place at 37°C for 1 h

20120903 Cyc1-T in psb1c3 und Tef1-P+Thaum.png 20120903 Negativkontr.+ADH1 mit Thaum.png 20120903 TEF1-T+Cyc-t in psb1c3.png 20120903 TEF2-P+ Thaum + Negativ.png 20120904 Promoteren ADH1,TEF2,TEF1 auf pyes2-tum.png

  • TEF1-T, CYC1-T, ADH1-P+Thaum and Tef2-P+Thaum were succesfully transformated into E.coli

Ligation of P571(psb1c3) with PCR 62 (TEF1-T)

Investigator:Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
2 µl T4-Ligase (1u/µl)
8,16 µl PCR62
2,54 µl (=100 ng) P571
2 10x T4-ligase buffer
6,3 µl dd H20
=20µl TOTAL
  • Ligation was cycled at 12 and 22 C

Miniprep of E. coli XL-Blue cells, transformated with ligation product of P571+PCR72

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products of P571+PCR72 (P586).

Procedure:

  • Miniprep was done after manufacturer's protocol (P611-P616). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of the minipreps P611-P616

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps P611-P616 with XbaI+PstI-HF.

Procedure:

  • Mastermix for analytical digestion for P601-P606 with XbaI+PstI-HF:
volume reagent
14 µl NEBuffer 4 (10x)
1.4 µl BSA (100x)
1.75 µl XbaI (20 U/µl)
1.75 µl PstI-HF (20 U/µl)
103.6 µl ddH2O
=122.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P611-P616).
  • The reaction mixes were incubated at 37 °C for 90 min.
  • 9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).
  • Analytical gelelectrophoresis was performed at 90 V for about 60 min.

P611-P616:

100 bp DNA ladder P611 P612 P613 P614 P615 P616 PCR72 control 1 kbp DNA ladder
Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful!

TUM12 20120901 anal gel p611-p616 pcr72.jpg

  • N'-SV40-Gal4AD-Linker-Pif3-C' has been successfully cloned with RFC10 pre- and suffix into pSB1C3.

Analytical restriction digest of schwab vector and repetition of ligation product and colony PCR products (continue)

Investigator: Andrea

Aim: Check that schwab plasmids and insert are right.

Gelelectrophoresis:


expected:

Limonensynthase: 1600 bp

pYES: 5800 bp

pSB1C3: 2000 bp

pGEX: 5000 bp

pET: 5700 bp

01.09.12 analytgel1 bearbeitet.png 01.09.12 analytgel2 bearbeitet.png

ligations: failed

colony PCR: negative

Miniprep of ligation products of P57 and P42

Investigator: Andrea

Aim: Check ligation products (PCR57/pSB1C3, PCR42/pSB1C3).

  • PCR57/pSB1C3 (1): 155.8 ng/µl
  • PCR57/pSB1C3 (2): 65.1 ng/µl
  • PCR42/pSB1C3 (1): 217.7 ng/µl
  • PCR42/pSB1C3 (2): 52.4 ng/µl

ligation products (P57/P42) are stored in a 50 ml Falcon tube (label: Miniprep, Andrea, 01.09.) in the upper drawer of -20°C.

Miniprep of ligated integration vector

Investigator: Andrea

Aim: Check integration vector with thaumatin (P607, P608) and limonensynthase (P609, P610).

  • Integration vector + Thaumatin (1): 580 ng/µl
  • Integration vector + Thaumatin (2): 383.8 ng/µl
  • Integration vector + Limonensynthase (1): 484.2 ng/µl
  • Integration vector + Limonensynthase (2): 714.7 ng/µl

ligation products (integration vector) are stored in plasmid box 6 (P607 - P610)

Sunday, September 2nd

Picking of S. cerevisiae clones from SC-U plates (pTUM104_preprothaumatin and pTUM104_limonene-synthase) and YPD-Kan plates (integrational vector)

Investigator: Martin

Aim: to establish a strain of S. cerevisiae with desired genotype

Procedure: Same procedure as every year.


Week 13

Monday, September 3rd

Plasmidextraction of P451,P450, P51 and P403

Investigator: Georg

  • Plasmid-DNA was extracted according to Quiaprep genextraction kit

Preparative Digestion of ADH1-P and TEF2-P(P451) with XbaI+PstI-HF, as well as Spei-HF and PstI-HF

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
2,5 µl PstI-HF (NEB)
2,5 µl XbaI (NEB)
10 µl NEB-4 buffer
1 µl 100 x BSA (NEB)
34 µl dd H20
=50µl TOTAL
  • Reaction batch for digestion:
volume reagent
2,5 µl PstI-HF (NEB)
2,5 µl SpeI-HF (NEB)
10 µl NEB-4 buffer
1 µl 100 x BSA (NEB)
34 µl dd H20
=50µl TOTAL
  • To 20 µl reaction batch, 20 µl of DNA were added and digested for 3 h at 37 C

Nanodrop measurement of ADH-T and TEF2-P

Investigator:Georg

  • ADH1-T(1) in psb1c3: 113,2 ng/µl
  • ADH1-T(2) in psb1cr: 158,2 ng/µl
  • " "(3): 159,2 ng/µl
  • TEF2-P in psb1c3:214,3 ng/µl
  • TEF2-P in psb1c3:108,2 ng/µl
  • TEF2-P in psb1c3:200 ng/µl


  • P678: 90,2 ng/µl
  • P679: 79,6 ng/µl
  • P680 : 52,2 ng/µl

Ligation of P578 with P680 and P679

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
2,45 µl (=100 ng) P578
2 10x T4-ligase buffer
1,91 µl P680
12,64 µl dd H20
=20µl TOTAL

Investigator: Georg Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
2,55 µl (=100 ng) P578
2 10x T4-ligase buffer
1,25 µl P680
13,2 µl dd H20
=20µl TOTAL
  • Negative controls were mixed with ddH20 instead of the insert
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Preparation of P588 (TEF2-P (450) for sequencing

Investigator: Georg

  • 5 µl DNA (289,7 ng/µl) and 12 ml H20 with seq. Number 025

Transformation of TEF1-T-psb1c3

Investigator:Georg

  • E.coli was transformed with with P638 for amplification

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on CAM plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new CAM plates.


Analytical digestion and gelelectrophoresis of the minipreps P534-P539, P611-P616

Investigator: Jeff

Aim of the experiment: To prove whether SV40 NLS (contains a KpnI resstriction site) are successfully fused to in the minipreps (P534-P539 and P601-P606).

Procedure:

Mastermix for KpnI-HF(NEB)+BamHI(Fermentas)

volume reagent
26 µl NEBuffer 4 (10x)
2.6 µl BSA (100x)
3.25 µl KpnI-HF (20 U/µl) (NEB)
6.5 µl BamHI (10 U/µl) (Fermentas)
189.15 µl ddH2O
=227.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P534-P539, P601-P606).
  • The reaction mixes were incubated at 37 °C for 90 min.
  • 9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).
  • Analytical gelelectrophoresis was performed at 90 V for about 60 min.
100 bp DNA ladder P534 P535 P536 P537 P538 P539 1 kbp DNA ladder
SV40 NLS successfully fused! SV40 NLS successfully fused! SV40 NLS successfully fused! SV40 NLS successfully fused! SV40 NLS successfully fused! SV40 NLS successfully fused!

TUM12 20120903 anal gel p534-p539.jpg

100 bp DNA ladder P601 P602 P603 P604 P605 P606 1 kbp DNA ladder
SV40 NLS successfully fused! SV40 NLS successfully fused! No SV40 NLS fused! SV40 NLS successfully fused! SV40 NLS successfully fused! SV40 NLS successfully fused!

TUM12 20120903 anal gel p601-p606.jpg

Preperative digestion and preperative gelelectrophoresis of P616, P606, P539, P638

Investigator: Jeff, Georg

Aim of the experiment: Preperative digestion and preperative gelelectrophoresis of:

  • P616 (SV40NLS-Gal4AD-Linker-Pif3(100NT)) (XbaI + PstI-HF)
  • P606 (SV40NLS-PhyB(908NT)-20aaLinker-Gal4DBD) (SpeI-HF + PstI-HF)
  • P539 (SV40NLS-PhyB(908NT)-20aaLinker-LexA) (SpeI-HF + PstI-HF)
  • P638 (TEF1 terminator) (SpeI-HF + PstI-HF and SpeI-HF + PstI-HF ).

Procedure:

volume reagent
20 µl P616
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
volume reagent
20 µl P606
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl SpeI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
volume reagent
20 µl P539
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl SpeI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
volume reagent
15 µl P638
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
18.6 µl ddH2O
=40 µl TOTAL
volume reagent
15 µl P638
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl SpeI (20 U/µl)
1 µl PstI-HF (20 U/µl)
18.6 µl ddH2O
=40 µl TOTAL
  • Preperative digestion was performed at 37 °C for 2.5 h.
  • Preperative gelelectrophoresis was performed at 70 V for 3 h.
100 bp DNA ladder P616 XbaI + PstI-HF 1 kbp DNA ladder P606 SpeI-HF + PstI-HF P606 SpeI-HF + PstI-HF
Lower band was cut out Band was cut out Band was cut out

TUM12 20120903 prep gel P616 P606 P539.jpg

100 bp DNA ladder P638 XbaI + PstI-HF 1 kbp DNA ladder P638 SpeI-HF + PstI-HF
Band was cut out Band was cut out

TUM12 20120903 prep gel P638XbaIPstI P638SpeIPstI.jpg

Analytical digest and gel electrophoresis

Investigator: Andrea Aim: Check that transformed clones are positive.

  • PCR42/pSB1C3 (transformation 29th August)
  • PCR57/pSB1C3 (transformation 29th August)
volume reagent
3 µl plasmid DNA
0.5 µl Xba 1
0.5 µl Spe-HF 1
2 µl NEB
0,2 µl BSA
12.8 µl ddH2O
  • incubation: 2 hours, 37°C

Gelelectrophoresis:

03.09.12 analytgel bearbeitet.png

all ligations: negative

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Picking transformed Saccharomyces cerevisiae cells for protein expression in yeast

  • Inoculation of overnight cultures: one clone from plate with PCR 1 in P175 clone 2 (Miniprep 21.08.) (29) & one clone from plate with P542 (PCR2) (Miniprep 28.08.) was picked,resuspended in 15 ml SCU medium with glucose and incubated at 30 °C overnight

SDS- Page of crude extract (CaXMT1, CaMXMT1 and eGFP expression, as well as three samples of the limonene group)

Investigator: Roman, Andrea

Aim of the experiment:

Aim of the experiment is the proof of successful protein expression of CaXMT1, CaMXMT1 and eGFP (used as positive controll), as well as xxx (limonene).

Operational sequence:

The SDS gel was prepared as previously described (12%). 10µl of cell lysate (20h after induction of expression) was mixed with 2,5 µl Laemmli- RED SDS loading buffer, resulting in an amount of protein 100µg (CaXMT1- crude extract), 80µg (CaMXMT1- crude extract) and 60µg (eGFP- crude extract).

The proteins were separated at 120V for about 1,5 hours. Afterwards, we did a western blot and used the same gel for a staining with coomassie brilliant blue.

Picture of gel (after having washed it with washing solution 1 (15 min) and 2 (4 hours):

TUM12 20120904 SDS-GEL2.jpg

Prestained Proteine Ladder LimX Limy Limz CaXMT1 CaMXMT1 eGFP

Preparation of cells for transformation in yeast

Investigator: Andrea

Aim of the experiment:Picking Saccharomyces cerevisiae colony (INVSc1) for frther transformation in yeast

  • Inoculation of overnight cultures: one clone from plate with INVSc1 from 23.08. was picked,resuspended in 4 ml YPD medium and incubated at 30 °C overnight

Western blot of 20 h samples of the expression of CaXMT1, CaMXMT1 and eGFP

Investigator: Saskia, Andrea

Aim: Analysis of the expression of CaXMT1, CaMXMT1 and eGFP (positive controll)after SDS-PAGE (120V, 1.5 h)

Procedure: preparation of solutions: as described in the materials

  • PBS-T0.1
  • PBS-T0.1 with 3% BSA

Blotting:

  • blotting of proteins on ImmobilonP Membrane (activating in methanol for 10 min)
  • gel and membrane in transferbuffer for 20 min
  • 50mA, 1 h

Blocking:

  • wash 3x7min with PBS-T0.1
  • the membrane is blocked over night in PBS-T0.1 with 3% BSA at 4 °C on a shaking device

Miniprep of B2A, B1B, B3D

Investigator: Dennis

Aim: Miniprep of 9 over night cultures with number B2A (3 times), B1B (3 times), B3D (3 times) (clones were isolated of over night culture, 5ml LB-medium with CHLP).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl ddH2O at room temperature, with the columns having been incubated 2 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Analytic digestion of B2A, B1B, B3D

Investigator: Dennis

Aim of the experiment: digestion of pSB1C3_CaXMT1 (clone B1B), pSB1C3_CaMXMT1 (clone B2A) and pSB1C3 (clone B3D) Procedure:

  • Reaction batch:
volume reagent
2,5 µl B1B, B2A, B3D
2 µl NEBuffer 4 (10x)
0,5 µl Ecor1 (20 U/µl)
0,5 µl PstI-HF (20 U/µl)
14,5 µl ddH2O
=20 µl TOTAL

Analytic Gelelectrophoresis of B2A, B1B, B3D

Investigator: Dennis

  • 4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • analytic gelelectrophoresis was perforemd at 80 V for 1 h.
1 kbp DNA ladder pSB1C3 CaMXMT1 (clone B2A 3) pSB1C3 CaMXMT1 (clone B1B 2) pSB1C3 CaMXMT1 (clone B3D 2) pSB1C3 CaMXMT1 (clone B1B 1) pSB1C3 CaMXMT1 (clone B3D 3) pSB1C3 CaMXMT1 (clone B3D 2)
1 kbp DNA ladder pSB1C3 (P463)

20120903 analgel B1B,B2A,B3D Dennis2.png

Transformation of E.Coli with pTUM104_CaXMT1, pTUM104_CaMXMT1 and pTUM104_CaDXMT1 as backup

Investigator: Roman

Aim: To fill up the amount of available pTUM104 for further yeast transformations

Operational sequence:

The transformation was done as previously described. 100µl of unconcentrated e.coli- cells were plated on ampicillin plates and incubated over night at 37°C.

Tuesday, September 4th

Transformation of P403 (ADH1-T in psb1c3) in E.coli Xl1-blue

Investigator:Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on CAM plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new CAM plates.

Preparative digestion of Cyc1-T-Kol2, TEF1-P-Kol1, ADH1-P and TEF2-P Kol6 in psb1c3 with XbaI and PstI-HF

  • Reaction batch for digestion:
volume reagent
4 µl PstI-HF (NEB)
4 µl XbaI (NEB)
24 µl NEB-4 buffer
2,4 µl 100 x BSA (NEB)
63,2 µl dd H20
=80µl TOTAL
  • 17,8 µl were taken from each batch for digestion and added to 20 ml of the mastermix

20120904 ADH1-P+ Thaumatin, TEF2-P und Thaum.png 20120904 TEF1-P+Thaum, Cyc-T.png

Preparation of P450 TEF2-P in psb1c3 for sequencing

Investigator: Georg

  • 10 µl P450 were mixed with 5 µl ddH20 for 50-100 ng/µl DNA

Gelextraction of digested TEF1-Thaum,TEF2-Thaum, ADH1-P-Thaum and Cyc-T

Investigator: Georg

  • Gelextraction was performed according to Quiaquick gelextraction protocol

Ligation of P572 (dig. pTUM100)with P684, P682, P683

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,24 µl (=100 ng) P684 (PYesII digested)
2 µl 10x T4-ligase buffer
10,6 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
3,16 µl P572
1 µl T4-Ligase (1u/µl)
3,24 µl P684
2 µl 10x T4-ligase buffer
10,6 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
3,14 µl P572
1 µl T4-Ligase (1u/µl)
3,16 µl P683
2 µl 10x T4-ligase buffer
10,6 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
3,17 µl P572
1 µl T4-Ligase (1u/µl)
1,11 µl P682
2 µl 10x T4-ligase buffer
12,72 µl dd H20
=20µl TOTAL
  • Negative controls were also prepared, instead of the insert the same amount of ddH20 was added
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Nanodrop measurement of digested CYC1-T, P684, P682, P683

Investigator: Georg

  • Cyc1-T (xbaI+PstI)P681 :19,4 ng/µl
  • ADH-P with Thaumatin (P684): 28 ng/µl
  • TEF1-P with Thaumatin (P682): 61,9 ng/µl
  • TEF2-P with Thaumatin (P683):27 ng/µl

Cycled ligation of P493+P639, P643+P299, P640+P642, P641+P642

Investigator: Jeff

Aim of the experiment: Cycled ligation of P493+P639 (TEF1 promoter + SV40NLS-Gal4AD-30aaLinker-Pif3(100NT)), P643+P299 (TEF1 terminator + TEF1 promoter), P640+P642 (SV40NLS-PhyB(908NT)-20aaLinker-Gal4DBD), P641+P642 (SV40NLS-PhyB(908NT)-20aaLinker-LexA).

Procedure:

  • Ligation batch for P493+P639
volume reagent
1.74 µl P493 (57.5 ng/µl, 2506 bp)
6.31 µl P639 (15.6 ng/µl, 824 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
8.95 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P643+P299
volume reagent
1.89 µl P643 (52.9 ng/µl, 2564 bp)
4.37 µl P299 (12.6 ng/µl, 472 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
10.74 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P640+P642
volume reagent
1.03 µl P640 (97.3 ng/µl, 5366 bp)
2.53 µl P642 (11.7 ng/µl, 530 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
13.44 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P641+P642
volume reagent
0.89 µl P641 (112.9 ng/µl, 5531 bp)
2.45 µl P642 (11.7 ng/µl, 530 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
13.66 µl ddH2O
=20 µl TOTAL
  • Negative controls were als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batches and were called: P493 NK, P643 NK, P640 NK, P641 NK.
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Preperative digestion of B2A, B1B, B3D

Investigator: Dennis

Aim of the experiment: preperative digestion of pSB1C3_CaXMT1 (clone B1B 2), pSB1C3_CaMXMT1 (clone B2A 3) and pSB1C3 (clone B3D 2) and the ADH1 terminator Procedure:

  • Reaction batch:
volume reagent
30 µl B1B, B2A, B3D, ADH1 Terminator
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
2 µl SpeI (20 U/µl)
2 µl PstI-HF (20 U/µl)
10,5 µl ddH2O
=50 µl TOTAL
  • Reaction batch:
volume reagent
30 µl ADH1 Terminator
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
2 µl XbaI (20 U/µl)
2 µl PstI-HF (20 U/µl)
10,5 µl ddH2O
=50 µl TOTAL

preperative Gelelectrophoresis

Investigator: Dennis

  • 4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • analytic gelelectrophoresis was perforemd at 120 V for 1 h.
1 kbp DNA ladder pSB1C3 CaMXMT1 (ADH1 Terminator) pSB1C3 CaMXMT1 (clone B2A 3) pSB1C3 CaMXMT1 (clone B1B 2) pSB1C3 CaMXMT1 (clone B3D 2)

20120904 prepgel ADH1Term B2A3 Dennis.png 20120904 prepgel B1B2 B3D2 Dennis.png

Gelextraction

Investigator:Dennis

  • Gelextraction of ADH1 terminator, B2A, B1B, B3D was performed according to Quiaquick gel extraction protocol
  • following concentrations were detected by Nanodrop:
  • ADH1==> 16,6 ng/µl
  • B2A_3 ==> 54,6 ng/µl
  • B1B_2 ==> 91,8 ng/µl
  • B3D_2 ==> 28,4 ng/µl

Cycled ligation of ADH1+B2A_3, ADH1+B1B_2, ADH1+B3D_2

Investigator: Dennis

Aim of the experiment: Cycled ligation

Procedure:

  • Ligation batch for ADH1+B2A_3
volume reagent
1,6  µl ADH1 (16,6 ng/µl, 2048 bp)
2  µl B2A_3 (13,5  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
13 ddH20 =21 µl TOTAL
  • Ligation batch for ADH1+B1B_2
volume reagent
2,66  µl ADH1 (16,6 ng/µl, 2048 bp)
1,8  µl B1B_2 (91,4  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
12,5 ddH2O =21 µl TOTAL
  • Ligation batch for ADH1+B3D_2
volume reagent
0,8  µl ADH1 (16,6 ng/µl, 2048 bp)
1,9  µl B3D_2 (28,7  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
14 ddH20 =20 µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Preparative restriction digest of p647 and ligation with p642

Investigator: Martin, Alois

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term

Preparative restriction digest:

  • 20 µl p647 (pSB1C3_Ter1Pro_Preprothaumatin), 4 µl NEBufer 4, 0.4 µl BSA, 1 µl SpeI, 1 µl PstI, 13.6 µl ddH2O; 37°C, 2 h.

Preparative gel electrophoresis:

  • Expected: ca. 3 kb.

Ligation of p648 (= p647 digested with SpeI and PstI) and ligation with p642 ("TER1Term digested with XbaI, PstI"):

  • 1 µl T4 DNA ligase, 2 µl T4 DNA ligase buffer, 2 µl p648, 5 µl p642, 10 µl ddH2O; over night, 16°C.

Western blot analysis of protein crude extract of CaXMT1, CaMXMT1 and eGFP transformants, as well as three samples of limonene synthase

Investigator: Roman

Aim of the experiment:

Detection of expressed proteins CaXMT1, CaMXMT1, eGFP and limonene synthase (citrus).

Operational sequence:

The western blot membran (having been blocked over the night at 4°C) was washed with PBS- T0.1 four times (4x 15min). Afterwards, the membran was incubated for 1h with detection reagent. Detection reagent:

  • 10ml 1xPBS
  • 0,2% BSA (0,02g have been weighted in)
  • 2µl anti body MABclassic

After incubating with the first antibody, the membran was washed again with PBS-T0.1 three times (3x 5min), followed by the incubation with the second antibody (anti mouse, fused with alk. phosphatase) for another our. Second detection reagent:

  • 10ml 1xPBS
  • 0,2% BSA (see above)
  • 5µl AntiMouse-alk. Phosphatase conjugate (1/2000 dilution)

The development was performed after washing the membran with PBS- T0.1 for 10 min (two times) and with 1xPBS for 10 min (two times). For this, the membran was shortly washed with AP buffer and then incubated with a solution containing 15ml AP buffer, 45µl BCIP (50mg/ml in DMF) and 7,5µl NBT (75mg/ml in 70% DMF) for a few minutes, until clear bands appeared.

Western blot membran:

TUM12 IGEM WB Coff-Lim0409007.jpg

From left to right:

Prestained protein marker (Page Ruler Plus) Limonene synthase (15h) Limonene synthase (20h) Limonene synthase (24h) CaXMT1 crude extract (20h) CaMXMT1 crude extract (20h) eGFP crude extract (20h)

Picking of colonies

Investigator: Saskia

Procedure:

  • Picking of 3 clones for miniprep: Y2G, Y3G, Y1G (4 ml LB, Amp)
  • Inbucation at 37°C (shaker) over night.


Picking of colony for yeast transformation

Investigator: Saskia

Procedure:

  • Picking of 1 clone of S. crevisiae INVSc1 for yeast transformation (4 ml YPD)
  • Inbucation at 30°C (shaker) over night.


Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Transfer of a certain amount of transformed Saccharomyces cerevisiae cells from yesterday to new medium with galactose for protein expression in yeast

  • Measurement: OD600
  • defined amount of resuspended S. cerevisiae were added to SCU medium with galactose for reaching OD600 = 0.4
  • Incubation at 30 °C overnight

Yeast transformation with p542 and p551

Investigator: Andrea

Aim of the experiment: Transformation of yeast cells (INVSC1) with the plasmids p542 (PCR2, Citrus) and p551 (PCR58, Lavendel) and pYES (for Coumaroyl group)

Operational sequence:

The yeast transformation was performed as described in the pYES2 manual of Invitrogen (see small scale yeast transformation), using an over night culture of INVSC1- yeast cells. The solutions 1xTE and 1xLiAc/40% PEG 3350/1xTE were made a few days before use.

Used amount of vector DNA:

  • p542: 4.8 µl
  • p551: 9 µl
  • pYES: 8.2 µl

At last, the cells were plated on appropriate agar- plates with SC -Ura medium and incubated at 30°C for the next three days. Colonies should be visible on friday.

Wednesday, September 5th

Transformation of P451 (TEF2-P in psb1c3) in E.coli Xl1-blue)

Investigator: Georg Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on CAM plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new CAM plates.

Preparative digestion of TEF1-P and ADH1-P in pTUM104

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
3 µl SpeI-HF
3 µl PstI-HF (NEB)
12 µl NEB-4 buffer
1,2 µl 100 x BSA (NEB)
40,8 µl dd H20
=60 µl TOTAL
  • To 20 µl of reaction batch 20 µl of DNA were added and digested for at 37 C over night

Preparative gelelectrophoresis of ADH1-P, TEF1-P and TEF2-P in pTUM100

Investigator:Georg

  • Digestions were loaded onto 1% ultra pure Agarose gels
  • gelrun took 90 min at 70 V

20120905 Präp ptumm100 mit 3 promotoren.png 20120906 ADH-P TEF1-P, TEF2-P in PyesII-TUM.png

  • Digestion was succesfull


Transformation and Picking of tonight's ligation products (p648 + p642)

Investigator: Alois the HONK

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

Transformation of p647

Investigator: Martianus Capella, Nikolaus von Kues

Yeast transformation with pTUM104_RFC25_CaDXMT1

Investigator: Roman

Aim of the experiment:

The aim of the experiment was the transformation of chemo competent yeast cells with the plasmid pTUM104_CaDXMT1, which contains the enzyme "caffeine synthase", being the last enzyme of the caffein biosynthesis pathway.

Operational sequence:

Contrary to previous experiments, this transformation was done with the S.C. EasyComp(TM) Transformation Kit (Invitrogen). The chemocompetent yeast cells have already been prepared (thanks to the chair of Prof. Schwab, Biotechnology of natural compounds) as 50µl aliquots.

Ca. 2 µg of plasmid DNA (Clone Y3G) were added to the competent cells together with "Solution III" (Kit) as described in the manufacturers protocoll.

The reaction batch was plated on SC-U agar plates and incubated at 30°C for 3 - 4 days.

Miniprep of E.Coli over night cultures, transformed with pTUM104_RFC25 constructs

Investigator: Roman

Aim of experiment:

Isolation of plasmids: pTUM104_CaXMT1, pTUM104_CaMXMT1 and pTUM104_CaDXMT1 for further usage.

Operational sequence:

The plasmid preparation was done with the Quiagen Plasmid Miniprep Kit as previously described. Elution was performed with 40µl of elution buffer, heated up to 37°C. Before final centrifugation, the column was incubated for 2 minutes at 37°C.

Determined concentrations (NanoDrop)

  • pTUM104_CaXMT1 (p553): 179,6 ng/µl
  • pTUM104_CaMXMT1 (p554): 340,7 ng/µl
  • pTUM104_CaDXMT1 (p555): 182,9 ng/µl

Transformation of E. coli with ADH1+B1B_2, ADH1+B2A_3, ADH1+B3D_2

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of ADH1+B1B_2, ADH1+B2A_3, ADH1+B3D_2.

Procedure:

  • 20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Cycled ligation of ADH1+B1B_1, ADH1+B3D_3

Investigator: Dennis

Aim of the experiment: Cycled ligation was performed for B1B_1 and B3D_3

Procedure:


  • Ligation batch for ADH1+B1B_1
volume reagent
2,66  µl ADH1 (16,6 ng/µl, 2048 bp)
1,8  µl B1B_1 (91,4  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
12,5 ddH2O =20 µl TOTAL
  • Ligation batch for ADH1+B3D_3
volume reagent
0,8  µl ADH1 (16,6 ng/µl, 2048 bp)
1,9  µl B3D_3 (28,7  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
14 ddH20 =20 µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Transformation of E. coli XL1-Blue with ligation products P493+P639, P643+PP299, P640+P642, P641+P642

Investigator: Mary

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P493+P639, P643+PP299, P640+P642, P641+P642.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P493+P639, P643+PP299, P640+P642, P641+P642) and their's negative controls (P493 NK, P643 NK, P640 NK, P641 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.
  • Incubation at 37 °C overnight.

Preparative digestion and gelelectrophoresis of P82

Investigator: Mary

Aim of the experiment: Digest P82 for further cloning experiments

  • Reaction batch for digestion of P82 with SpeI-HF+PstI-HF:
volume reagent
20 µl P82
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl PstI-HF (20 U/µl)
1 µl Spe-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch was incubated at 37 °C for 2.5 h
  • 4.44 µl of DNA loading buffer (10x) was added to the digested product and preperative gelelectrophoresis was performed at 70 V for 1.5 h.

TUM12 20120905 prep gel P82.jpg

Transformation of E. coli XL1-Blue with P664, P51, P52, P53

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P664 (KanR, AmpR), P51 (KanR, AmpR), P52 (KanR), P53 (KanR).

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 2 µl of the biobricks (P664, P51, P52, P53) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on kanamycin plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new kanamycin plates.
  • Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with BBa_K268000 (pSB6A0)

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with BBa_K268000 (pSB6A0), a empty hybrid yeast bacteria vector without promoter and terminator. For future cloning of expression cassettes.

Procedure:

  • 4 colonies of the transformation with BBa_K268000 (pSB6A0) were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and ampicillin. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Preparation of SCU-medium containing galactose (induction medium)

Investigator: Katrin

Aim of the experiment:Preparation of induction medium for a 2 l expression experiment

for 1 liter:

  • dissolve 50 ml AS-Aliquot + 6.7g Yeast Nitrogen Base in 850 ml of water, then autoclave
  • dissolve 20 g galactose in 100 ml water
  • autoclave both solutions separately

4 liter of induction medium were made

Harvest proteins expressed in yeasts

Investigator: Katrin

Aim: Cell disruption for harvesting proteins expressed in yeasts (crude protein extract)

Procedure:

  • resuspending cell pellets in defined volume of breaking buffer + PMSF
  • adding glass beads
  • vortex for 30 seconds and incubate on ice for 30 seconds (repetition for 40 times)
  • centrifuge at 4 °C, full speed, 10 min
  • take supernatant and centrifuge at 4 °C, full speed, 10 min again
  • store supernatant at -80°C (second box)

a 5 ml aliquot of cells was harvested at 9:30 and a 10 ml aliquot was harvested at 12:30

Miniprep of PCR 42 (citrus limonene synthase with consensus sequence) in plasmid P133 (pSB1C3) and PCR 57 (lavendula limonene synthase from Prof. Schwab) in plasmid P133 (pSB1C3) (6 clones each)

Investigator: Katrin

Aim: Get more plasmid DNA (PCR42/pSB1C3, PCR 57/pSB1C3)

concentrations:

  • PCR57/P133 clone 1: 75,4 ng/µl
  • PCR57/P133 clone 2: 244,6 ng/µl
  • PCR57/P133 clone 3: 232,9 ng/µl
  • PCR57/P133 clone 4: 63 ng/µl
  • PCR57/P133 clone 5: 77,2 ng/µl
  • PCR57/P133 clone 6: 100,5 ng/µl
  • PCR42/P133 clone 1: 57 ng/µl
  • PCR42/P133 clone 2: 73,3 ng/µl
  • PCR42/P133 clone 3: 57,4 ng/µl
  • PCR42/P133 clone 4: 74,4 ng/µl
  • PCR42/P133 clone 5: 75,8 ng/µl
  • PCR42/P133 clone 6: 178,4 ng/µl

picking of clones for a 2 l expression experiment

Investigator: Katrin

Aim: picking of clones for a 2 l expression experiment 2 clones of S. cerevisiae containing citrus limonene synthase (mit consensus sequence) were picked from the plate Andrea 29 (22.08.) and resuspended in 100 ml SCU medium + glucose

Vectorfragmentation of structural genes of Xanthohumol

Investigator: Ingmar

Aim of the experiment: The detection of our desired proteins via western blot failed three times. To rule out that recombinations of vector elements did take place, the vector backbone of our gene constructs and of a pYes vector from the limonengroup containing a gene insert whose protein could be detected via western blot was fragmented and the fragmentation patterns were compared.

Operational sequence:

  • General reaction batch:
volume reagent
x µl DNA Template
1.2 µl NEB buffer 3 (10x)
0.8 µl Tango buffer (10x)
0.2µl BSA (100x)
0.25 µl NotI (20 U/µl)
0,25 µl PvuI (20 U/µl)
0.25 µl AflIII (20 U/µl)
y µl ddH2O
=20µl TOTAL
  • The volume of DNA was calculated to have 500 ng of DNA. A suitable volume water was added to result in a total volume of 20 µl.
  • Incubation at 37 °C for 2h.
  • Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 4 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

Gel picture of vectorfragmentation 1


Gel picture of vectorfragmentation 2

The fragmentation pattern does not show unexpeted bonds. Therefore the gene constructs might have some point mutations which are not visible via Agarose gel electrophoresis. As the transformation of yeast with our constructs resulted in a reasonable number of cfu, it is likely that the URA3 gene and the 2µOri are not affected by possible mutations. Thats why we will continue our work with sequencing our gene constructs including their respective promoters.

Thursday, September 6th

Gelextraction of P678, P679, P680

Investigator: Georg

  • Gelextraction was done according to the Quiaquick extraction kit protocoll

analytical gelelectrophoresis with P678, P680 and P679

Investigator: Georg

  • Gelelectrophoresis was done on 0,5% analytical agarose gels with 90 V for 60 min

20120906 TEF2-P (P450), ADH-P,TEF1-P in Pyes2tum.png

  • Experiment done in order to differentiate tubes

Transformation of E. coli Xl1-blue with ligation products P572 and TEF2-P-Thaum, TEF1-P-Thaum and ADH1-P-Thaum

Investigator:Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Picking of colonies from transformants with P403 (ADH1-T), P451 (TEF2-P), P450 (TEF2-P) and P51 (eGFP)

  • 5 µl of 1000x Amp-solution were added to 5 ml LB-medium
  • colonies were picked to AMP-LB medium
  • Colonies grew over night at 37 C


Miniprep of E. coli XL-Blue cells, transformated with biobrick BBa_K268000 (emtpy yeast vector)

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with biobrick BBa_K268000 (emtpy yeast vector=without promoter and terminator).

Procedure:

  • Miniprep was done after manufacturer's protocol (P674-P677). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of P674-P677

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P674-P677 with XbaI+PstI-HF.

Procedure:

  • Reaction batch for P674-P677
volume reagent
2.5 µl Plasmid DNA (P674-P677)
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl XbaI (20 U/µl) (NEB)
0.25 µl PstI (20 U/µl) (NEB)
14.8 µl ddH2O
=20 µl TOTAL
  • Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.
  • 2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.
  • 10 µl of these were loaded in the gel pockets.
  • Analytical gelelectrophoresis was performed at 90 V for ~60 min.
1 kbp DNA ladder P674 P675 P676 P677
Biobricks still contain forbidden restriction sites! Biobricks still contain forbidden restriction sites! Biobricks still contain forbidden restriction sites! Biobricks still contain forbidden restriction sites!

TUM12 20120906 anal gel P674-677.jpg

Transformation of E. coli XL1-Blue with P664

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with P664 (KanR and AmpR).

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 6 µl (because 2 µl on KanR plates didn't work)of the biobrick BBa_I712019 in pSB1AK8 (P664) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of the cell suspension were plated on ampicillin plate.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new ampicillin plates.
  • Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642.

Procedure:

  • 3 colonies of each transformation with were taken (4x3 colonies = 16 colonies).
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term pSB1C3_TEF1Prom_Preprothaumatin (p647) and pTUM104_Preprothaumatin

Investigator: Eriugena, Nietzsche

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

Preparation of SC-U medium with 2% glucose (4 l) and transfer of colonies into medium

Investigator: Andrea, Lara

Amino acid solution was prepared seperately (see pYES manual):

  • 1 g Adenine, Arginine, Leucine, Threonine, Tryptophan
  • 0.5 g Aspartic acid, Histidine, Isoleucine, Methionine, Phenylalanine, Proline, Serine, Tyrosine, Valine
  • 1,49 g Cysteiniumchlorid, Lysindihydrochlorid
  • six aliquots were stored at the lowest drawer of -20°C.


Yeast nitrogen base was prepared separately (by Katrin):

  • 6.7g Yeast nitrogen base in 850 ml ELGA water


4 l medium (in two 2 l flasks):

  • 4 aliquots (50 ml) of amino acis prepared before were used
  • each 6.7 g yeast nitrogen base
  • each 850 ml ELGA water
  • after dissolving, the solution was autoclaved


Sugar solution was prepared separately (by Martin):

  • 200g of glucose were dissolved in 1000 ml ELGA water
  • autoclaving


After autoclaving:

  • 200 ml of glucose solution was added to a total of 2 l SC-U medium

--> transfer of pre-culture (100 ml, OD600=5) each into 2 L of SC-U medium

--> 4 µl of pre-culture was applied to a SC-U plate to keep clones for further use (incubation at 30°C, check tomorrow!)


Minipreparation of pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term pSB1C3_TEF1Prom_Preprothaumatin (p647) and pTUM104_Preprothaumatin

Investigator: Eriugena, Nietzsche, masterblaster

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

  • pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term: p665-p669.
  • pSB1C3_TEF1Prom_Preprothaumatin: p670-p671.
  • pYes2_Preprothaumatin: p672-p673.

Analytical digest and analytical gel electrophoresis of pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term

Investigator: Eriugena, Nietzsche, Dennis

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

Digest 1:

  • 5 µl p665-p669, 0.25 µl EcoR1, 0.25 µl Pst1, 0.2 µl BSA, 2 µl NEBuffer EcoR1, 12 µl ddH2O; 37°C, 1h.

Digest 2:

  • 5 µl p665-p669, 0.5 µl Not1, 0.2 µl BSA, 2 µl NEBuffer 3, 12 µl ddH2O; 37°C, 1h.

Analytical gel electrophoresis: 1 kb marker, p665_1, p666_1, p667_1, p668_1, p669_1, p665_2, p666_2, p667_3, p668_4, p669_5.

  • Bild
  • Expected: backbone: 2.2 kb, insert: 1.7 kb.

Result:

Thaumatin expression cassette analytical TUM12.Tif

On the left you see the digest with EcoRI and PstI. The bands show the desired length - the ligation was a historic triumph. The bands on the right show the same plasmids digested with NotI - as indicated by sequence data obtained bei Schorsch, the TefI-Terminator lost the NotI restriction site due to a punctual mutation.

Picking of colonies for miniprep

Investigator: Dennis

Aim: New miniprep for new transformation of E. coli with ligation batch B2A_3+ADH1 terminator and B1B_2+ ADH1 terminator and B3D_3+ ADH1 terminator

  • Picking of 3 clones each of ligation batch
  • Inbucation at 37°C (shaker) over night.

preperative Gelelectrophoresis

Investigator: Dennis

  • 4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • Preperative gelelectrophoresis was perforemd at 90 V for 1 h.
1 kbp DNA ladder pSB1C3_CaMXMT1 (clone B1B_1) pSB1C3_CaMXMT1 (clone B3D_3)
  • all bands was cut out and purified via Gelextraction


Gel extraction of separated fragments

Investigator:Dennis

  • Gelextraction of B1B_1, B3D_3 was performed according to Quiaquick gel extraction protocol
  • following concentrations were detected by Nanodrop:
  • B1B_1 ==> 8,8 ng/µl
  • B3D_3 ==> 10,4 ng/µl

Transformation of E. coli

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of ADH1 Terminator+B1B_1, ADH1 terminator+ B3D_3.

Procedure:

  • 20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Analytical restriction digest of plasmid prep of september 5th

Instructor: Katrin

PCR57/p133


File:TUM12 LS analytgel0609.jpg


PCR42/p133


File:TUM12 LS analytgel20609.jpg

--> ligations failed

Cell lysis of 5ml samples taken 20min after expression induction

Investigator: Roman

Aim of the experiment:

Cell lysis of yeast cell- samples taken 20 min after expression. The idea is to compare the gene expression 20min after induction and 20h after induction. The signals on the western blott should show, that the two bands of our expressed enzymes are only visible after 20h.

Operational sequence:

  • an adequate amount of breaking buffer (containing PMSF) was given to the frozen cell pellet, as well as an equal amount of glass beads. Note: because the supernatant could not be taken after 10 min centrifugation, another 30µl of breaking buffer were added.
  • cell- walls were disrupted by vortexing for 30 sec, followed by 30 sek on ice. This procedure was repeated 4 times.
  • protein concentration was determined by NanoDrop (blank: breaking buffer)
    • CaXMT1 crude extract: 1 mg/ml
    • CaMXMT1 crude extract: 2,23 mg/ml

SDS- Page of protein crude extracts, taken at different times after induction of expression

Investigator: Roman

Aim of the experiment:

Aim of the experiment is the preparation of a SDS- page, to make a subsequent western blot and to compare the samples, taken at different expression times.

Operational sequence:

The SDS- gel was prepared as previously described (12%). 20µg protein crude extract of each sample were loaded on the gel. Running- time: ca. 2h at 120V. Additionally to the prestained protein marker, we used an un- prestained marker, which contained a 45 kDa protein. Afterwards, the gel was immediately used for the western blot.

Western blot of samples of the expression of CaXMT1, CaMXMT1 and eGFP

Investigator: Saskia, Roman

Aim: Analysis of the expression of CaXMT1, CaMXMT1 and eGFP (positive controll)after SDS-PAGE (120V, 1.5 h)

Procedure: preparation of solutions: as described in the materials

  • PBS-T0.1
  • PBS-T0.1 with 3% BSA

Blotting:

  • blotting of proteins on ImmobilonP Membrane (activating in methanol for 10 min)
  • gel and membrane in transferbuffer for 20 min
  • 50mA, 1 h

Blocking:

  • wash 3x7min with PBS-T0.1
  • the membrane is blocked over night in PBS-T0.1 with 3% BSA at 4 °C on a shaking device

Sequencing of structural genes of Xanthohumol including the promoter

Investigator: Ingmar

Aim of the experiment: Check wheather the gene constructs have mutations in the promoters

Results: The following geneconstructs were sequenced including the promoter: P194 4Cl- in pYes P263 APT in pYes P197 OMT+ in pYes P198 OMT- in pYes P200 PAL- in pYes P236 PAL+ in pYes All of these sequences did not show any mutation in the promoter. Therefore the fact that our proteins were not detectable might be a result of errors during the transformation. Hence the transformation will be repeated. Parallely our gene constructs will be cloned into a pYes vector backbone of the Limonen group who could successfully express and detect their proteins.

Friday, September 7th

Plasmidextraction of P451,P450, P51 and P403

Investigator: Georg

  • Plasmid-DNA was extracted according to Quiaprep genextraction kit


Miniprep of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642.

Procedure:

`* Miniprep was done after manufacturer's protocol (P686-P697). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of P686-P697

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P686-P697 with XbaI+PstI-HF.

Procedure:

  • Mastermix for digestion of P686-P697 with XbaI and PstI-HF:
volume reagent
26 µl NEBuffer 4 (10x)
2.6 µl BSA (100x)
3.25 µl XbaI (20 U/µl) (NEB)
3.25 µl PstI (20 U/µl) (NEB)
192.4 µl ddH2O
=227.5 µl TOTAL
  • 17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P686-P697).
  • Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.
  • 2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.
  • 10 µl of these were loaded in the gel pockets.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min on a 0.5% agarose gel.
1 kbp DNA ladder P686 P687 P688 P689 P690 P691
Ligation was successful! Ligation was successful! Ligation was successful! Ligation was successful! Ligation was successful! Ligation was successful!

TUM12 20120907 anal gel P686-P691.jpg

1 kbp DNA ladder P692 P693 P694 P695 P696 P697
Ligation was successful! Ligation was successful! Ligation was successful! Ligation was successful! Ligation was successful! Ligation was successful!

TUM12 20120907 anal gel P692-P697.jpg

Preparative digestion of P687, P690, P693, P697

Investigator: Jeff

Aim of the experiment: Preparative digestion of P687 (SpeI-HF+PstI-HF), P690 (XbaI+PstI-HF), P693(XbaI+PstI-HF), P697(XbaI+PstI-HF).

Procedure:

  • Reaction batch for digestion of P687 with SpeI-HF+PstI-HF:
volume reagent
20 µl P687
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl Spe-HF (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P690 with XbaI+PstI-HF:
volume reagent
20 µl P690
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P693 with XbaI+PstI-HF:
volume reagent
20 µl P693
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P697 with XbaI+PstI-HF:
volume reagent
20 µl P697
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch was incubated at 37 °C overnight.

Preparative restriction digest of PCR1/pTUM104 (P515neu) and PCR58/pSB1C3 (P510)

Investigator: Andrea

Aim: Prepare PCR1 for ligation into pSB1C3

volume reagent
20 µl Plasmid
4 µl NEBuffer 4 (10x)
0.4 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl AgeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • plasmids were digested at 37 °C for 3 hours.

Gelelectrophoresis:

Limonensynthase: 1600 bp

pSB1C3: 2000 bp

pYES: 5800 bp

07.09.2012 prepgel bearbeitet.png

Single colony streak of PCR2 in yeast

Investigator: Lara

Aim: Since we only had one colony of PCR2/pYES in yeast, we wanted to get more yeast colonies by picking a bit of this clone and smearing it onto a new SC-U plate. The plate was incubated at 30°C over night.

check plate tomorrow and store in fridge!


Miniprep of E.Coli over night cultures

Investigator: Dennis

Aim of experiment:

Isolation of plasmids: B2A_3+ADH1 terminator (1), B1B_2+ADH1 terminator (2), B3D_3+ADH1 (4) terminator for further usage.

Operational sequence:

The plasmid preparation was done with the Quiagen Plasmid Miniprep Kit as previously described. Elution was performed with 40µl of elution buffer, heated up to 37°C. Before final centrifugation, the column was incubated for 2 minutes at 37°C.


analytic digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator

experimenter: Dennis

Aim of the experiment: analytic digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator

Procedure:

  • Reaction batch:
volume reagent
5 µl B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator
2 µl NEBuffer 4 (10x)
0,5  µl EcorI (20 U/µl)
0,5 µl PstI-HF (20 U/µl)
12 µl ddH2O
=20 µl TOTAL


  • gelelectrophoresis: B2A_3+ADH1 terminator (3 times), B1B_2+ADH1 terminator (3 times), B3D_3+ADH1 terminator (3 times)


Staining with Ponceau's reagent and western blot analysis of protein crude extract of CaXMT1, CaMXMT1 and eGFP transformants after 20 minutes and 20 hours of expression

Investigator: Saskia, Roman

Aim of the experiment:

Detection of expressed proteins CaXMT1, CaMXMT1, eGFP.

Operational sequence:

The western blot membran (having been blocked over the night at 4°C) was washed with PBS- T0.1 four times (4x 15min). Because of the use of un- prestained protein marker (see Thursday, 6.9.), we stained the western blot membran with Ponceau's reagent and assigned the bands, followed by washing the membran with PBS- T0.1 again (15 minutes, 2x). Afterwards, the membran was incubated for 1h with detection reagent. Detection reagent:

  • 10ml 1xPBS
  • 0,2% BSA (0,02g have been weighted in)
  • 2µl anti body MABclassic

After incubating with the first antibody, the membran was washed again with PBS-T0.1 three times (3x 5min), followed by the incubation with the second antibody (anti mouse, fused with alk. phosphatase) for another our. Second detection reagent:

  • 10ml 1xPBS
  • 0,2% BSA (see above)
  • 5µl AntiMouse-alk. Phosphatase conjugate (1/2000 dilution)

The development was performed after washing the membran with PBS- T0.1 for 10 min (two times) and with 1xPBS for 10 min (two times). For this, the membran was shortly washed with AP buffer and then incubated with a solution containing 15ml AP buffer, 45µl BCIP (50mg/ml in DMF) and 7,5µl NBT (75mg/ml in 70% DMF) for a few minutes, until clear bands appeared.

Western blot membran:

TUM12 IGEM WB coff.jpg

From left to right (with expression time in brackets):

Prestained protein marker (Page Ruler Plus) CaXMT1 crude extract (20min) CaMXMT1 crude extract (20min) eGFP(20h) CaMXMT1 crude extract (20h) CaXMT1 crude extract (20h) Unstained protein marker (pen marking)

Picture with annotations:

TUM12 WBIIannotiert.jpg

Preparing of controls for large-scale expression

Investigator: Lara


Aim: Prepare controls for analyzing background protein expression in yeast.


  • Control 1: S. cerevisiae without plasmid containing limonene synthase.

-> growth in 50 ml of SC (--> 0.005 g of uracil were put into 50 ml of SC-U (+Glucose) and filtered with a steril-filter)


  • Control 2: Transformed yeast (containing PCR1/pYES) without induction of expression

-> culture was transferred into fresh medium.


Transfer of yeast containing PCR/pTUM104 into induction medium (+Gal)

Investigator: Andrea, Lara


Aim: Cultures that were grown in 2 L of SC-U (+Glu) were transferred into 2 L of SC-U (+Gal).

  • First, the OD was measured: OD=4
  • Approximately 300 ml of the culture was centrifuged and resuspended in induction medium
  • transfer into 2 L of induction medium


Cloning of Xanthohumol gene constructs in pTUM104 vector backbone of the Limonen group

Investigator: Ingmar

Aim of the experiment: Rule out negative effects of possible mutations in the vector backbone.

Operational sequence:

  • Reaction batch for digestion of P515(Limonen vector) and of Xanthohumol gene construts with XbaI+PstI-HF:
volume reagent
20 µl DNA template
4 µl NEBuffer 3 (10x)
0.4 µl BSA  (100x)
2 µl PstI-HF (20 U/µl)
2 µl XbaI (20 U/µl)
11.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch was incubated at 37 °C for 3 h
  • 4.5 µl of DNA loading buffer (10x) was added to the digested product and preperative gelelectrophoresis was performed at 70 V for 1.5 h.

TUM12 Prepgel 07.09.2012 Limonensynthase in pYes.jpg

500px


500px


500px

  • The desired bonds of the genes were cut out of the gel and the DNA was extracted using a Quiagen gel extraction kit. Resulting DNA samples:
Label Content Concentration [ng/µl]
P755 PAL+(P236) 7.4
P756 PAL-(P200) 6.9
P757 4CL+(P193) 5.7
P758 4Cl-(P194) 7.5
P759 CHS+(P428) 53.5
P760 CHS-(P429) 3.3
P761 OMT+(P197) 3.9
P762 APT(P263) 6.4
P763 pYes backbone of P515 116.5
  • Ligation batches:

The component volumina were calculated to result in a ratio 1:6 vector to insert. The ligation process lasted overnight with a repeated sequence of 1 min at 16°C and 1 min at 22°C

Insert Insertvolume [µl] Vectorvolume (P763) [µl] T4 DNA Ligase T4 DNA Ligase Buffer Water Sum
PAL+ (P755)7,780,2212920
PAL-(P756)7,80,212920
4Cl+(P757)7,790,2112920
4Cl-(P758)7,720,2812920
CHS+(P759)5,842,1612920
CHS-(P760)7,820,1812920
APT(P761)7,670,3312920
OMT-(P762)7,770,2312920

September, Saturday 8th

Cloning of Xanthohumol gene constructs in pTUM104 vector backbone of the Limonen group

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 5 µl of the ligation batch from 07.09.2012
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 45 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Preparative gelelectrophoresis of preparative digestion of P687, P690, P693, P697

Investigator: Jeff, Saskia

Aim of the experiment: Preparative gelelectrophoresis was performed from the samples from the preparative digestion overnight of P687 (SpeI-HF+PstI-HF), P690 (XbaI+PstI-HF), P693(XbaI+PstI-HF), P697(XbaI+PstI-HF).

Procedure:

  • 4.44 µl of DNA loading buffer was added to the digestion mixture.
  • Preparative gelelectrophoresis was performed at 70 V for 3 h.
P687 SpeI + PstI-HF 1 kbp DNA ladder P690 XbaI-HF + PstI-HF
Band was cut out (3316 bp, 75.5 ng/µl) Lower band was cut out (988 bp, 30.4 ng/µl)

TUM12 20120908 prep gel P687 P690.jpg

P693 XbaI-HF + PstI-HF 1 kbp DNA ladder P697 XbaI-HF + PstI-HF
Upper band was cut out (3848 bp, 68.7 ng/µl) Upper band was cut out (4013 bp, 69.8 ng/µl)

TUM12 20120908 prep gel P693 P697.jpg

Transformation of E. coli XL1-Blue with BBa_I712019, BBa_E2020, BBa_E2030

Investigator: Saskia

Aim of the experiment: Transformation of E. coli XL1-Blue with BBa_I712019, BBa_E2020, BBa_E2030 (H10, 12D, 12B)

Procedure:

  • 2µl of each ligation product were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • The cells were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellets were resuspended in 100 µl of LB-medium and plated on: H10 Ampicillin plates, 12D Kanamycin plates, 12B Kanamycin plates

Cycled ligation of P698+P699

Investigator: Saskia

Aim of the experiment: Cycled ligation of P698+P699 (TEF1 promoter - SV40NLS-Gal4AD-30aaLinker-Pif3(100NT) + TEF1 terminator - TEF1 promoter).

Procedure:

  • Ligation batch for P698+P699
volume reagent
1.32 µl P698 (75.5 ng/µl, 3316 bp)
1.19 µl P699 (30.4 ng/µl, 988 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
14.49 µl ddH2O
=20 µl TOTAL
  • Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batch and was labeled as P698 NK.
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Analytical digestion and gelelectrophoresis of P676, P73, P81, P134

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P676 (pSB6A0 (BBa_K268000)), P73 (BBa_K207001 in pSB1A2), P81 (BBa_K207000 in pSB3K3), P134 (BBa_K165055 in BBa_J63009).

Procedure:

  • Reaction batch for digestion of P676 with EcoRI-HF and SpeI-HF:
volume reagent
2.5 µl Plasmid DNA (P676)
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl EcoRI-HF (20 U/µl) (NEB)
0.25 µl SpeI-HF (20 U/µl) (NEB)
14.8 µl ddH2O
=60 µl TOTAL
  • Mastermix for digestion of P676 (pSB6A0 (BBa_K268000)), P73 (BBa_K207001 in pSB1A2), P81 (BBa_K207000 in pSB3K3), P134 (BBa_K165055 in BBa_J63009):
volume reagent
8 µl NEBuffer 4 (10x)
0.8 µl BSA (100x)
1 µl XbaI (20 U/µl) (NEB)
1 µl PstI (20 U/µl) (NEB)
49.2 µl ddH2O
=60 µl TOTAL
  • For digestion of P73, P81, P134 15 µl of the mastermix for XbaI+PstI-HF was added to 5 µl of plasmid DNA.
  • Analytical digestion mixes were incubated at 37 °C for 1.5 h.
  • 2 µl of DNA loading buffer (10x) was added to each reaction batch.
  • 10 µl of each sample was loaded into the gel pocket.
  • Analytical gelelectrophoresis was performed at 90 V for 1 h
1 kbp DNA ladder P676(pSB6A0 (BBa_K268000)) P73 (BBa_K207001 in pSB1A2) P81 (BBa_K207000 in pSB3K3) P134 (BBa_K165055 in BBa_J63009)
Bands like expected! Corrupt! Corrupt! Corrupt!

TUM12 20120908 anal gel P676 P73 P81 P134.jpg

  • Conclusion for P676 (=pSB6A0 (BBa_K268000)): This part contains at least one forbidden restriction site (XbaI or PstI, please see analytical gel from September, the 6th. But here, one can see that EcoRI and SpeI can nevertheless be used for cloning parts into pSB6A0
  • The other parts (P73 (BBa_K207001 in pSB1A2), P81 (BBa_K207000 in pSB3K3), P134 (BBa_K165055 in BBa_J63009)) are all completely wrong! Wrong size of bands and partially also the vector!


Ligation of citrus limonene synthase into pSB1C3 containing TEF1/TEF2 promoter

Investigator: Andrea


Aim: Ligate citrus limonene synthase into pSB1C3 behind TEF2 and TEF1 promoter.


Procedure

Citrus LS (p578) in pSB1C3 with TEF2 (p492)

Substance Volume
P492 (TEF2/pSB1C3; digested with Spe+Pst) 1.52 µl
P578 (LS, digested with Xba+Pst) 6.48 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

Negative control water in P492

Substance Volume
P492 (digested with Xba1+Age1) 1.52 µl
ddH2O 6.488 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

Citrus LS (p578) in pSB1C3 with TEF1 (p493)

Substance Volume
P493 (TEF2/pSB1C3; digested with Spe+Pst) 2.05 µl
P578 (LS, digested with Xba+Pst) 5.95 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

Negative control water in P493

Substance Volume
P493 (digested with Xba1+Age1) 2.05 µl
ddH2O 5.958 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

Citrus LS (PCR1, restriction digest on 7th September) in pSB1C3 (restriction digest 7th September)

Substance Volume
pSB1C3 (digested with Xba1+Age1) 0.71 µl
LS (PCR1 digested with Xba1+Age1) 7.298 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

Negative control water in pSB1C3 (restriction digest 7th September)

Substance Volume
pSB1C3 (digested with Xba1+Age1) 0.71 µl
ddH2O 7.298 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

ligation reactions are stored in a 50 ml falcon at the lowest drawer of -20°C.

Large-scale cell lysation

Investigator: Volker, Lara

Aim: Production of cell lysate (large-scale).


1. OD of cell cultures were measured:

  • clone 1: OD600=4.2
  • clone 2: OD600=2.8
  • control: clone 2 (uninduced) OD600=5,6 (medium: SC+Glu)
  • control: S. cer (not transformed) OD600=4,6 (medium:SC+uracil)


2. Cell cultures were centrifuged (large scale:25 min at 3000 rpm; controls: 10 min at 3000rpm) and the pellet was washed in breaking buffer (without PMSF).

  • 200 ml BB for large-scale cultures
  • 50 ml BB for controls


3. After centrifugation, pellets were resuspended in breaking buffer (with PMSF) to reach an OD of 70-100.

  • large-scale cultures(2L): 80 ml BB+PMSF
  • controls (50ml): 2,5 ml BB+PMSF


4. 1 volume of glass beads (0,5 mm) was added. In cool room: 20-40 cycles of vortexing (30 sec) and incubation (30 sec).


5. the supernatant was transferred to fresh tubes.

Samples were stored at the lowest drawer of -20°C in a 50 ml falcon tube.

Suggestion for next time: Take a transformed yeast (induced) in small-scale as third control.


Production of Breaking buffer

Investigator: Lara, Andrea

For 1 L of 1 M sodium phosphate buffer:

prepare:

  • 127,8 g Na2HPO4; add 900 ml of distilled water -> solution 1
  • 24 g of NaH2PO4; add 200 ml of distilled water -> solution 2
  • mix 845 ml of solution 1 with 155 ml of solution 2 (you can measure the amount by weight scale)
  • adjust pH to pH=7.5 by adding more of solution 1 or solution 2
  • autoclave and store at room temperature

For PMSF solution:

  • has to be made each time, can not be stored due to short half time
  • 0,0522 g PMSF; add 3 ml isopropanol

For breaking buffer with PMSF:

50 mM sodium phosphate buffer 1 mM EDTA 5 % glycerol 1 mM PMSF

Transformation of E. coli

Investigator: Saskia

Aim of the experiment: Transformation of E. coli XL1-Blue with the ligation products Lara 1,2,3 and NK492, NK493, NKpSB1C3

Procedure:

  • 5µl of each ligation product were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest was centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • incubation over night (37°C)

Cloning of Xanthohumol gene constructs in pTUM104 vector backbone of the Limonen group continued

Investigator: Ingmar

  • From each gene construct transformed in XL1 blue cells on saturday 08th september 2012 a single clone was picked an transferred into 7 ml fresh LB-media containing 1:1000 ampicilin(as the number of colonies of CHS+/- was low a few clones were picked). Incubation overnight at 37°C and 180 rpm.

Sunday, September 9th

Transformation of E. coli XL1-Blue with ligation products P698+P699 and biobricks BBa_J52008, BBa_E0020, BBa_E2060, BBa_E0026, BBa_E0036, BBa_E0040, BBa_E1010

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P698+P699 and biobricks BBa_J52008 in pSB1AK3, BBa_E0020 in pSB1A2, BBa_E2060 in pSB2K3, BBa_E0026 in pSB1A2, BBa_E0036 in pSB1A2, BBa_E0040 in pSB1A2, BBa_E1010 in pSB2K3.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation product (P698+P699) and it's negative control (P698 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice. 2 µl of the biobricks BBa_J52008 in pSB1AK3, BBa_E0020 in pSB1A2, BBa_E2060 in pSB2K3, BBa_E0026 in pSB1A2, BBa_E0036 in pSB1A2, BBa_E0040 in pSB1A2, BBa_E1010 in pSB2K3 were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension (only ligation products!) were plated on chloramphenicol plates.
  • The rest (ligation products and biobricks) were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated on suitable antibiotic plates.
  • Incubation at 37 °C overnight.

Cycled ligation of P698+P699

Investigator: Jeff

Aim of the experiment: Cycled ligation of P698+P699 (TEF1 promoter - SV40NLS-Gal4AD-30aaLinker-Pif3(100NT) + TEF1 terminator - TEF1 promoter).

Procedure:

  • Ligation batch for P698+P699
volume reagent
1.32 µl P698 (75.5 ng/µl, 3316 bp)
2.92 µl P699 (30.4 ng/µl, 988 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
12.76 µl ddH2O
=20 µl TOTAL
  • Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batch and was labeled as P698 NK.
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Cloning of Xanthohumol gene constructs in pTUM104 vector backbone of the Limonen group continued

Investigator: Ingmar

Aim of the experiment: Get purified DNA for transformation in yeast and check wheather the inserts are correct.

Procedure:

  • Using a Quiagen kit a miniprep of the overnight culture was done.
  • The resulting purified DNA was aliquoted in new tubes labeled as follows:
Plasmid number Content Concentration
P739PAL+ (P236) in Limonen pYes(P515)220,9 ng/µl
P740PAL- (P200) in Limonen pYes(P515)133,6 ng/µl
P7414Cl+ (P193)in Limonen pYes (P515)312,7 ng/µl
P7424Cl- (P194)in Limonen pYes(P515)89,4 ng/µl
P743CHS+ (P428)in Limonen pYes(P515)204,7 ng/µl
P744CHS in Limonen pYes53,1 ng/µl
P745CHS- (P429)in Limonen pYes(P515)65,8 ng/µl
P746CHS- (P429)in Limonen pYes(P515)531,8 ng/µl
P747CHS- (P429)in Limonen pYes(P515)53,6 ng/µl
P748OMT- (P198)in Limonen pYes(P515)250,4 ng/µl
P749APT (P263)in Limonen pYes(P515)97,1 ng/µl
  • Afterwards a control digestion of P739-P749 was done.

Reaction batch

Plasmid DNA 2.5 µl
NEB3 buffer 2 µl
PstI-HF 0.25 µl
XbaI 0.25 µl
ddH2O 15 µl
Sum 20 µl
  • Incubation at 37 °C for 1h.
  • Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 2 µl 10x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

Gel picture of control digest genes in limonene pYes 1


The ligation of all batches except P 743 was successfull as the bonds appear at the expected length.

Quick Change mutagenesis to remove mutations found by sequencing in our gene constructs

Investigator: Ingmar

Aim of the experiment: Deletion of found mutations.

Operational sequence


1. PCR general setup
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)


PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.

2. Used constructs and primers

Quickchange number Plasmid number Geneconstruct Primer number Primer
QC 1P428CHS+ pYesO104 & O105c614t
QC 2P429CHS- pYesO104 & O105c614t
QC 3P430CHS+ pSB1C3O104 & O105c614t
QC 4P431CHS- pSB1C3O104 & O105c614t
QC 5P197OMT+ pYesO96 & O97a1055g
QC 6P198OMT- pYesO96 & O97a1055g
QC 7P236PAL+ pYesO108 & O109a770g
QC 8P200PAL- pYesO108 & O109a770g
QC 9P188PAL- pSB1C3O108 & O109a770g
QC 10P187PAL+ pSB1C3O108 & O109a770g
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Week 14

Monday, September 10th

Transformation of E.coli Xl1-blue with ligation of P578 and P679,P680

Investigator: Georg Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on ampicillin plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Gelextraction of TEF2-P clone P451 (xbaI and PSTI-HF, SpeI-HF PstI-HF) and ADH1-T (XbaI PstI-HF, SpeI-HF and PstI-HF

Investigator:Georg

  • Gelextraction was done according to Quiaquick gelextraction protocoll

Nanodrop measurement of P707, P708, P709 and P710

Investigator:Georg

  • P707: 9,9 ng/µl
  • P708: 19,6 ng/µl
  • P709: 55,7 ng/µl
  • P710: 61,6 ng/µl

Ligation of TEF2-P (clone P451) with pTUM100 and of P578 with P710

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
2,48 µl P578
1,62 µl P710
2 10x T4-ligase buffer
12,9 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,17 µl P572
2,08 µl P708
2 10x T4-ligase buffer
11,75 µl dd H20
=20µl TOTAL
  • From each ligation, negative controls were made with ddH20 instead of the insert
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Picking colonies from P638, BBa_J52008, BBa_E2060, BBa_E0036, BBa_E1010

Investigator: Georg

  • Colonies were picked and transferred into 5 ml LB-medium with 1x CAM (P638), Kan (BBa_J52008,BBa_E2060), Amp (BBa_E0036)

Transformation of E. coli XL1-Blue with ligation product P698+P699

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation product.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation product (P698+P699) and it's negative control (P698 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest of the suspension was centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and was plated on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Electroporation of electrocompetent E. coli with P698+699

Investigator: Jeff, Adam

Aim of the experiment: Electroporation of electrocompetent E. coli with P698+699

Procedure:

Preparative digestion and gelelectrophoresis of P676

Investigator: Alois, Martin

Aim of the experiment: Preparative digestion and gelelectrophoresis of P676.

Procedure:

  • Reaction batch for digestion of P687 with SpeI-HF+PstI-HF:
volume reagent
20 µl P676
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Preparative digestion mix was incubated for 2 h at 37 °C.
  • After incubation ~4-5 µl of DNA loading buffer (10x) was added to reaction mix.
  • Preparative gelelectrophoresis was performed for xxx h at 70 V
Part from other subproject 1 kbp DNA ladder Part from other subproject P676 EcoRI-HF + SpeI-HF
Band was cut out (4791 bp, 76.1 ng/µl)

TUM12 20120910 120910 GenomTTT.jpg

  • Gel purification after manufacturer's protocol (Qiagen) after cutting out the DNA band.

Picking of E. coli XL1-Blue transformated with biobricks BBa_J52008, BBa_E2060, BBa_E0036, BBa_E1010

Investigator: Georg

Aim of the experiment: Picking of E. coli XL1-Blue transformated with biobricks BBa_J52008 in pSB1AK3, BBa_E2060 in pSB2K3, BBa_E0036 in pSB1A2, BBa_E1010 in pSB2K3.

Procedure:

  • 4 colonies of each transformation were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and suitable antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Preparative digestion of P686, P691, P692, P696

Investigator: Jeff

Aim of the experiment: Preparative digestion of P686 (SpeI-HF+PstI-HF), P691 (XbaI+PstI-HF), P692(XbaI+PstI-HF), P696(XbaI+PstI-HF).

Procedure:

  • Reaction batch for digestion of P686 with SpeI-HF+PstI-HF:
volume reagent
20 µl P686
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl Spe-HF (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P691 with XbaI+PstI-HF:
volume reagent
20 µl P691
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P692 with XbaI+PstI-HF:
volume reagent
20 µl P692
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P696 with XbaI+PstI-HF:
volume reagent
20 µl P696
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch was incubated at 37 °C overnight.

Induction of expression of CaDXMT1

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the start of the expression of CaDXMT1. This is the third and last gene, neccessary for caffeine- synthesis (previous transformation experiments did not work).

Operational sequence:

First of all, the OD600 of the over night culture was determined: 4,42 (0,442 at 1/10 dilution). Next, 200ml of SC-U 2% galactose medium were inoculated with an adequate amount of the over night culture (has grown in SC-U 2% glucose). Note: Not the whole amount of the calculated over night culture was centrifuged down. Thus, about 12 ml of glucose medium were given to the galactose medium. In theory, the expression will start a little bit later, due to the repression of the Gal1 promoter (glucose mediated).

Sampling:

  • 15 min after induction (12:00 am) (OD600: 0,442)
  • xx min after induction


Picking of colonies for miniprep

Investigator: Dennis

Aim: New miniprep for new transformation of E. coli with ligation batch B2A_3+ADH1 terminator and B1B_2+ ADH1 terminator and B3D_3+ ADH1 terminator

  • Picking of 3 clones each of ligation batch
  • Inbucation at 37°C (shaker) over night.

Transformation of E. coli

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of ADH1 Terminator+B1B_1, ADH1 terminator+ B3D_3.

Procedure:

  • 20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Ligation of ADH1+B1B_1, ADH1+B3D_3

Investigator: Dennis

Aim of the experiment: ligation was performed for B1B_1 and B3D_3

Procedure:


  • Ligation batch for ADH1+B1B_1
volume reagent
2,66  µl ADH1 (16,6 ng/µl, 2048 bp)
1,8  µl B1B_1 (91,4  ng/µl, 825 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
12,5 ddH2O =20 µl TOTAL
  • the ligation has been performed at 16 °C

Plating of transformed yeast colony (with pTUM104_CaDXMT1)

Investigator: Roman

Aim: Backup of the transformant for further usage

Operational sequence:

150 µl were plated on SC-U agar plates (2% glucose) and incubated at 30°C for a few days.

Preparative digest of p667 (pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term) and ligation with p649 (integration vector digested with EcoRI and SpeI) + Trafo

Investigator: Martin, Alois

Aim of the experiment: Getting integration_vector_TEF1Prom_Preprothaumatin_TEF1Term

Preparative digest:

  • 30 µl p667, 1 µl EcoRI, 1 µl SpeI, 0.5 µl BSA, 5 µl NEBuffer 4, 12.5 µl ddH2O; 37°C, 2 h.

Preparative gel electrophoresis: 1 kb, p667, (p468), (Jeff).

120910 GenomTTT TUM12.jpg

  • Expected: backbone: 2.2 kb, insert: 1.7 kb. Successful.

Gel extraction:

  • pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term digested with EcoRI and SpeI = p735.

Ligation of p735 and p649 (=> p737)

  • 1 µl T4 DNA ligase, 2 µl T4 DNA ligase buffer, 10 µl p649, 8.5 µl p735; 45 min RT.

Transformation of p737 integration_vector_TEF1Prom_Preprothaumatin_TEF1Term (=> Amp).


Preparative digest of p468 ("pSB1C3_backbone") and ligation with p735 ("TEF1Prom_Preprothaumatin_TEF1Term") + Trafo

Investigator: Martin, Alois, Fabiano Celentano

Aim of the experiment: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term with functional NotI

Preparative digest:

  • 20 µl p468, 1 µl EcoRI, 1 µl SpeI, 0.5 µl BSA, 5 µl NEBuffer 4, 22.5 µl ddH2O; 37°C, 2 h.

Preparative gel electrophoresis: 1 kb, (p667), p468, (Jeff).


120910 GenomTTT TUM12.jpg

  • Expected: backbone: > 2.2, insert: 2.2 kb ("pSB1C3_backbone"). Successful.

Gel extraction:

  • pSB1C3_backbone digested with EcoRI and SpeI = p736.

Ligation of p736 and p735 (=> p738)

  • 1 µl T4 DNA ligase, 2 µl T4 DNA ligase buffer, 1.3 µl p736, 13.5 µl p735, 2 µl ddH2O; 45 min RT.

Transformation of p738 = pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term with functional NotI (Cam).


Western blot of samples of the expressed Limonenesynthase (harvested on 5th September and on 8th September)

Investigator: Andrea

Aim: Analysis of the expression of Limonenesynthase

Procedure:

SDS-PAGE

  • order: I am not sure about the order, but it is noted (sheet in labjournal) --> the marker is on the right side !!
  • 120V, 2h

preparation of solutions: as described in the materials

  • PBS-T0.1
  • PBS-T0.1 with 3% BSA

Blotting:

  • blotting of proteins on Nitrocellulose Membrane
  • gel and membrane in transferbuffer for 10 min
  • 50mA, 1.25 h

Blocking:

  • wash 3x5min with PBS-T0.1
  • the membrane is blocked over night in PBS-T0.1 with 3% BSA at 4 °C on a shaking device

Transformation of E. coli XL1-Blue

Investigator: Ingmar, Daniela

Aim of the experiment: Transformation of E. coli XL1-Blue with quickchange products and plasmids for stemm preservation.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the quickchange products and 1 µl of the miniprep products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • Used DNA:
    • P430 CHS+ in pSb1C3
    • P431 CHS- in pSB1C3
    • P593 4Cl+ in pSB1C3 after sdm 24.08.2012
    • P594 4Cl- in pSB1C3 after sdm 24.08.2012
    • P595 4Cl+ in pYes after sdm 24.08.2012
    • P596 4Cl- in pYes after sdm 24.08.2012
    • P209 APT in pSb1C3
    • P137 OMT+ in pSB1C3
    • Quickchange products:
      • P428 CHS+ in pYes sdm with c614t
      • P429 CHS- in pYes sdm with c614t
      • P430 CHS+ in pSb1C3 sdm with c614t
      • P431 CHS- in pSb1C3 sdm with c614t
      • P197 OMT+ in pYes sdm with a1055g
      • P198 OMT- in pYes sdm with a1055g
      • P236 PAL+ in pYes sdm with a770g
      • P200 PAL- in pYes sdm with a770g
      • P188 PAL- in pSb1C3 sdm with a770g
      • P187 PAL+ in pSb1C3 sdm with a770g
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on LB plates containing the appropriate antibiotics.
  • The rest of the suspension was centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and was plated on LB plates containing the appropriate antibiotics.
  • Incubation at 37 °C overnight.

Tuesday, September 11th

Tranformation of E.coli Xl1-blue with ligation product from 07.9.2012

Investigator: Georg

  • Last time, heat shock was forgotten and plates didn't show any transformants
  • Therefore the experiment was repeated

Plasmid-extraction of picked colonies from 10.9.2012

Investigator: Georg

  • Plasmid-DNA was extracted according to Quiaprep-genextraction protocoll


Analytical digestion of minipreped BBa_J52008, BBa_E2060, BBa_E1010, BBa_E0036

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
2,75 µl PstI-HF (NEB)
2,75 µl EcorI (NEB)
22 µl NEB-4 buffer
2,2 µl 100 x BSA (NEB)
166 µl dd H20
=192,5µl TOTAL
  • to 2,5 ml of DNA 17,5 µl reaction batch were added
  • Digestion took place at 37°C for 1 h

20120911 Anal. Verdau Reporterproteine.png

  • only BBa_J52008 and BBa_E1010 showed positive inserts

Preparative digestion of pTUM100 (3), P638 and psb1c3-TEF1-P

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
1 µl PstI-HF (NEB)
1 µl XbaI (NEB)
4 µl NEB-4 buffer
0,4 µl 100 x BSA (NEB)
13,6 µl dd H20
=20µl TOTAL
  • 20 µl pTUM104 were added
  • Reaction batch for digestion:
volume reagent
1 µl SpeI-HF(NEB)
1 µl EcorI-HF (NEB)
4 µl NEB-4 buffer
0,4 µl 100 x BSA (NEB)
13,6 µl dd H20
=20µl TOTAL
  • 20 µl of pTUM104 (3) were added
  • Digestion took place at 37°C for 3 h
  • Reaction batch for digestion:
volume reagent
1 µl EcorI-HF (NEB)
5,5 µl SpeI-HF (NEB)
4 µl NEB-4 buffer
0,4 µl 100 x BSA (NEB)
13,6 µl dd H20
=20µl TOTAL
  • to 20 µl of reaction batch 20 µl of psb1c3-TEF1-P were added
  • Digestion took place at 37°C for 3 h

20120912 Psb1c3 (spe+EcorI), PyesII XbaI+PstI, TEF1-T (Spe+EcorI).png

Analytical gelelectrophoresis of picked BBa_J52008, BBa_E2060, BBa_E1010, BBa_E0036

Investigator: Georg

  • DNA was applicated onto a 1% analytical agarose Gel
  • Analytical gelelectrophoresis was performed 1 h at 90 V


Preparative digestion of BBa_J52008, BBa_E1010 and psb1c3-Limonensynth.

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
12 µl PstI-HF (Ferm)
6 µl XbaI (Ferm)
12 µl Tango-buffer
40 µl dd H20
=80µl TOTAL


  • To 20 µl reaction batch, 20 ml of BBa_J52008,TEF2-pTUM104 or BBa_E1010 were added
  • Digestion was performed over night at 37 C

20120912 E1010,J52008 und Tef2-P-Limonens.png

Preparative gelelectrophoresis of preparative digestion of P686, P691, P692, P696

Investigator: Jeff

Aim of the experiment: Preparative gelelectrophoresis of preparative digestion of P686, P691, P692, P696.

Procedure:

  • 4.44 µl of DNA loading buffer was added to the digestion mixture.
  • Preparative gelelectrophoresis was performed at 70 V for 2-3 h.
P686 SpeI + PstI-HF 1 kbp DNA ladder P691 XbaI-HF + PstI-HF
Band was cut out (3316 bp, 80.3 ng/µl) Lower band was cut out (988 bp, 34.3 ng/µl)

TUM12 20120911 prep gel P686 P691.jpg

P692 XbaI-HF + PstI-HF 1 kbp DNA ladder P696 XbaI-HF + PstI-HF
Upper band was cut out (3848 bp, 68.7 ng/µl) Upper band was cut out (4013 bp, 69.8 ng/µl)

TUM12 20120911 prep gel P692 P696.jpg

  • Gel extraction was performed with gel extraction kit from Qiagen after manufacturer's protoco..

Cycled ligation of P751+P752

Investigator: Jeff

Aim of the experiment: Cycled ligation of P751+P752.

Procedure:

  • Ligation batch for P751+P752
volume reagent
1.25 µl P751 (80.3 ng/µl, 3316 bp)
2.61 µl P752 (34.3 ng/µl, 988 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
13.14 µl ddH2O
=20 µl TOTAL
  • Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batch and was labeled as P751 NK.
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Transformation of E. coli XL1-Blue with ligation product P751+P752

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation product P751+P752.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation product (P751+P752) and it's negative control (P751 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest of the suspension was centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and was plated on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Picking of clones of tranformations done on monday 10th september

Investigator: Ingmar

  • From each gene construct transformed in XL1 blue cells on monday1 8th september 2012 a single clone was picked an transferred into 7 ml fresh LB-media containing 1:1000 of the apropriate antibiotics. Incubation overday at 37°C and 180 rpm.

Miniprep of clones of tranformations done on monday 10th september

Investigator: Ingmar

Aim of the experiment: Get purified DNA for transformation in yeast and stem preservation.

Procedure:

  • Using a Quiagen kit a miniprep of the overday culture was done.
  • The resulting purified DNA was aliquoted in new tubes labeled as follows:
Plasmid number Content Concentration
P766P428 CHS+ in pYes nach sdm c614t364,7 ng/µl
P767P429 CHS- in pYes nach sdm c614t42,7 ng/µl
P768P430 CHS+ in pSB1C3 nach sdm c614t158,5ng/µl
P769P431 CHS- in pSB1C3 nach sdm c614t336,2 ng/µl
P770P197 OMT+ in pYes sdm with a1055g146 ng/µl
P771P198 OMT- in pYes sdm with a1055g114,3 ng/µl
P772P236 PAL+ in pYes sdm with a770g395,6 ng/µl
P773P200 PAL- in pYes sdm with a770g
P774P188 PAL- in pSb1C3 sdm with a770g227,4 ng/µl
P775P187 PAL+ in pSb1C3 sdm with a770g124,8 ng/µl
P776P430 CHS+ in pSb1C371,2 ng/µl
P777P431 CHS- in pSB1C318,1 ng/µl
P778P593 4Cl+ in pSB1C3 after sdm 24.08.2012205,3 ng/µl
P779P594 4Cl- in pSB1C3 after sdm 24.08.2012207 ng/µl
P780P595 4Cl+ in pYes after sdm 24.08.2012174,5 ng/µl
P781P596 4Cl- in pYes after sdm 24.08.2012240,5 ng/µl
P782P209 APT in pSb1C3148,7 ng/µl
P783P137 OMT+ in pSB1C3117,5 ng/µl
P784P431 CHS- in pSB1C3 nach sdm c614t Klon 2115,8 ng/µl

The side directed mutagenesis leading to P773 (P200 PAL- in pYes sdm with a770g) was not successfull and will be repeated. As the yield of P777 (P431 CHS- in pSB1C3, C = 18,1 ng/µl) is very low a new clone will be picked for an overnight culture.

Picking and Miniprep of p737 (pIntVector_TEF1Prom_Preprothaumatin_TEF1Term) and p738 (pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term_Not1)

Investigator: Martin, Alois

Aim of the experiment: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term with functional NotI

Expression of pTUM104_Preprothaumatin in S. cerevisiae

Investigator: Martin, Alois

Expression according to pYes2_manuel:

  • Preparation of SC-U medium with 2% glucose/2% galactose: 50 ml-amino acid aliquot + 6.7tg Yeast Nitrogen Base + 850 ml Elga; devide solution in 270 ml and 630 ml; autoclave, add 30 ml 20% glucose to 270 ml and 70 ml 20% galactose to 630 ml.
  • 1. Inoculate a single colony of S. cerevisiae containing your pYES2 construct (pYes2_Preprothaumatin) into 5 ml of SC-U medium containing 2% glucose. Grow overnight at 30°C with shaking.
  • 2. Determine the OD600 of your overnight culture. Calculate the amount of overnight culture necessary to obtain an OD600 of 0.4 in 50 ml of induction medium (0.4*50 ml = OD600*X ml). 3. Remove the amount of overnight culture as determined in Step 2 (X ml) and pellet the cells at 1,500 g for 5 minutes at 4°C. 4. Resuspend the cells in 1–2 ml of induction medium (SC-U medium containing 2% galactose) and inoculate into 50 ml of induction medium. Grow at 30°C with shaking. 5. Harvest an aliquot of cells at 0, 2, 4, 6, 8, and 10 hours (+ over night) after addition of cells to the induction medium. For each time point, remove "1 ml <=> OD = 1" of culture from the flask. 6. Centrifuge the cells at 1,500 g for 5 minutes at 4°C. 7. Decant the supernatant; we only need the supernatant.

Glycerol stock of pTUM104_Preprothaumatin in S. cerevisiae

Investigator: Martin, Alois

  • Colony + 5 ml YPD (50 ml-Erlenmeyer flask), 30°C over night; addition of 1 ml sterile 80% glycerol; 1 ml aliquots were stored at -80°C.

Western blot analysis of limonene synthase

Investigator: Lara

Aim of the experiment:

Detection of expressed limonene synthase (citrus).

Operational sequence:

The western blot membran (having been blocked over the night at 4°C) was washed with PBS- T0.1 three times (3x 10-15min). Afterwards, the membran was incubated for 1h with detection reagent: The membrane was put into a 50 ml falcon tube containing detection reagent and the falcon was incubated in the cold room on the rollator. Detection reagent:

  • 10ml 1xPBS+0.1%Tween
  • 0,2% BSA (0,02g have been weighted in)
  • 2µl anti body MABclassic

After incubating with the first antibody, the membran was washed again with PBS-T0.1 three times (3x 5min), followed by the incubation with the second antibody (anti mouse, fused with alk. phosphatase) for another hour. Second detection reagent:

  • 10ml 1xPBS
  • 0,2% BSA (see above)
  • 5µl AntiMouse-alk. Phosphatase conjugate (1/2000 dilution)

The development was performed after washing the membran with PBS- T0.1 for 10 min (two times) and with 1xPBS for 10 min (two times). For this, the membran was shortly washed with AP buffer and then incubated with a solution containing 15ml AP buffer, 45µl BCIP (50mg/ml in DMF) and 7,5µl NBT (75mg/ml in 70% DMF) for a few minutes, until clear bands appeared.

Western blot membrane:


From left to right:

  • 1. Clone 1 (after dialysis), large-scale (LS with consensus sequence, PCR1)
  • 2. Clone 2 (after dialysis), large-scale (LS with consensus sequence, PCR1)
  • 3. LS without consensus sequence (PCR2) (cell lysis 5.9., Katrin, 17 h after induction of expression)
  • 4. LS without consensus sequence (PCR2) (cell lysis 5.9., Katrin, 20 h after induction of expression)
  • 5. Clone 1 (before dialysis), large-scale cell lysis on 8.9 (PCR1).
  • 6. Clone 2 (before dialysis), large-scale cell lysis on 8.9 (PCR1).
  • 7. Clone 2 (not induced), cell lysis on 8.9 (PCR1).
  • 8. Yeast, not transformed, cell lysis on 8.9.
  • 9. page ruler plus

TUM12 LS westernblot.png


Miniprep of transformation September 10th

Investigator: Dennis

Aim: Miniprep of 9 over night cultures with number B2A + terminator ADH1 (3 times, colony 1,2,3), B1B + terminator ADH1(3 times, colony 1,2,3), B3D + ADH1 terminator (3 times, colony 1,2,3). Clones were isolated of over night culture, 5ml LB-medium with CHLP.

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl ddH2O at room temperature, with the columns having been incubated 2 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Analytic digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator

Investigator: Dennis

Aim of the experiment: analytic digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator, B3D_2+ADH1 terminator (plate 5)

Procedure:

  • Reaction batch:
volume reagent
5 µl B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator
2 µl NEBuffer 4 (10x)
0,5  µl EcorI (20 U/µl)
0,5 µl PstI-HF (20 U/µl)
12 µl ddH2O
=20 µl TOTAL

Analytic gel electrophoresis

experimenter: Dennis

  • 1 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • analytic gelelectrophoresis was perforemd at 90 V for 1 h.
1 kbp DNA ladder pSB1C3 CaMXMT1 (clone B2A colony 1) pSB1C3 CaMXMT1 (clone B2A colony 2) pSB1C3 CaMXMT1 (clone B2A colony 3) pSB1C3 CaMXMT1 (clone B1B colony 1) pSB1C3 CaMXMT1 (clone B1B colony 2) pSB1C3 CaMXMT1 (clone B1B colony 3) pSB1C3 CaMXMT1 (clone B3D colony 1) pSB1C3 CaMXMT1 (clone B3D colony 2) pSB1C3 CaMXMT1 (clone B3D colony 3) pSB1C3 CaMXMT1 (clone B3D 5 colony 1) pSB1C3 CaMXMT1 (clone B3D 5 colony 2) pSB1C3 CaMXMT1 (clone B3D 5 colony 3)
1 kbp DNA ladder

20120911 analytgel dennis1.png + 20120911 analytgel dennis2.png

Sampling of expressed proteins

Investigator: Roman

Aim of the experiment:

Aim of the experiment was to take a 5 ml sample of the cell suspension 20h after expression induction.

Operational sequence:

At first, the OD600 was measured (1/10 dilution) and determined as 4,0. Afterwards, 5 ml of the cell suspension were taken out and pelleted by centrifugation for 5 min at 4°C and 1500xg. The pellet was washed with 500µl of sterile water, followed by a second centrifugation step. The pellet was then stored at -80°C until cell lysis.

Cell lysis of stored pellets and SDS page

Investigator: Roman

Aim of the experiment:

Aim of the experiment was to isolate the protein crude extract out of the stored cell pellet. Afterwards, we wanted to separate the proteins by SDS gel electrophoresis.

Operational sequence:

At first, we resuspended the frozen cell pellet in the adequate volume of breaking buffer (containing 1mM PMSF) to get an OD of 50.

  • CaDXMT1 (15 min after induction of expression): 42 µl breaking buffer (OD600: 0,42)
  • CaDXMT1 (20h after induction of expression): 400µl breaking buffer (OD600: 4,0)

The equal amount of glass beads was added, followed by 20- 30 steps of vortexing (30sek) and ice incubation (30sek). Afterwards, the protein concentration was determined with NanoDrop (absorption at 280nm)

  • CaDXMT1 (15min): 17,2 mg/ml
  • CaDXMT1 (20h): 7,4 mg/ml

The protein crude extracts were diluted with breaking buffer, to get 10µl samples containing 30µg of protein crude extracts. The samples were mixed with 2,5µl Laemmli (non reducing) and boiled for 5 min. Afterwards, the samples were loaded on the gel, together with 6µl of prestained protein marker (PageRuler Plus) and 6µl unprestained protein marker.

The gel was performed at 120V, ca. 2h.

Western blot analysis of isolated protein crude extract

Investigator: Roman, Saskia

Aim of the experiment:

Aim of the experiment was the detection of the expressed enzyme CaDXMT1 in the isolated protein crude extract, having been separated on SDS page before (see above).

The proteins were blotted on a PVDF membran for 1h with 50mA. The membran was activated before blocking by 10min incubation in 100% methanol.

After blotting the proteins, we performed a reversible staining of the membran with Ponceau's reagent, to make the unprestained marker visible and to be able to assign it with a pen.

Miniprep of clones from transformation of september 8th

Investigator: Lara, David

Aim: Get plasmid DNA of clones that contain pSB1C3/TEF1/LS, pSB1C3/TEFF2/LS, pSB1C3/PCR1(LS).

LS/TEF2/pSB1C3

  • 1: 263 ng/µl

LS/TEF1/pSB1C3

  • 2(1): 144 ng/µl
  • 2(2): 123,5 ng/µl
  • 2(4): 214,6 ng/µl
  • 2(5): 202,3 ng/µl
  • 2(6): 290,2 ng/µl
  • 2(7): 257,8 ng/µl

LS(PCR1)/pSB1C3

  • 3(1): 181,4 ng/µl
  • 3(2): 168,8 ng/µl
  • 3(3): 208,1 ng/µl
  • 3(4): 179,4 ng/µl
  • 3(5): 186,2 ng/µl
  • 3(6): 224,8 ng/µl
  • 3(7): 186,0 ng/µl
  • 3(8): 280,0 ng/µl
  • 3(9): 120,3 ng/µl
  • 3(10): 206,1 ng/µl

miniprep products are stored in a disposal bag in the middle drawer of -20°C. label: lara miniprep 11.9.

Analytical digest and gel electrophoresis

Investigator: Lara

Aim: Check whether ligations worked (ligation with TEF promoters and ligation of PCR1 with pSB1C3)


volume reagent
2.5 µl plasmid DNA
0.25 µl EcoR1
0.25 µl Spe-HF1
2 µl NEB
0.2 µl BSA
14.8 µl ddH2O
  • incubation: 1.5 hours, 37°C

Gelelectrophoresis:

gel 1: marker, 1, 2(1), 2(2), 2(3), 2(4), 2(5), 2(6), 2(7) gel 2: marker, 3(1), 3(2), 3(3), 3(4), 3(5), 3(6), 3(7), 3(8), 3(9), 3(10)

TUM12 LS analytgel1 1109.png TUM12 LS analytgel2 1109.png

Wednesday, September 12th

Preparative digestion of BBa_E1010, BBa_J52008, pTUM101, pTUM103, P508 with EcorI-HF and SpeI-HF

Investigator:Georg

    • Reaction batch for digestion:
volume reagent
7 µl PstI-HF (NEB)
7 µl XbaI (NEB)
28 µl NEB-4 buffer
2,8 µl 100 x BSA (NEB)
95,2 µl dd H20
=140µl TOTAL
  • To 20 µl digestion batch 20 µl DNA were added digestion was done for 3 hours at 37 C
  • Experiment was stopped since it didn't made sense

Preparative Gelexlectrophoris and gelextraction of preparative digested probes

Investigator: Georg

  • Gelelectrophoresis was done on 1% preparative agarose at 70 V for 90 min
  • Gelextraction was performed according to Quiaquick Gel extraction protocoll

20120912 Psb1c3 (spe+EcorI), PyesII XbaI+PstI, TEF1-T (Spe+EcorI).png File:20120912 pYES2 verdaut mit EcorI und SpeI.png


Nanodrop measurement of digested BBa_E1010, pTUM 101,BBa_J52008, TEF2-P-Limonens., psb1c3 (P(811), TEF1-T (P812), Midiprep

Investigator: Georg

  • BBa_E1010: 7,5 ng/µl
  • pTUM101(22,2 ng/µl)
  • BBa_J52008 (P791): 27,1 ng/µl
  • TEF2-P-Limonens.: 18 ng/µl
  • psb1c3 (P811): 47,8 ng/µl
  • TEF1-T (P812): 10,5 ng/µl
  • Midiprep: 339 ng/µl

Ligations of P680+ P791, P679+ P791, P885+ P886, P679+ P578, P680+ P578

Investigator: Georg

  • Procedure:
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,92 µl P680
1,88 µl P791
2 10x T4-ligase buffer
13,2 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,25 µl P679
1,95 µl P791
2 10x T4-ligase buffer
16,8 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
2,08 µl P885
7,22 µl P886
2 10x T4-ligase buffer
7,7 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
4,51 µl pYES2
2,29 µl TEF2-P-Limonens.
2 10x T4-ligase buffer
10,2 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,26 P679
P5,14 µl P578
2 10x T4-ligase buffer
10,6 µl dd H20
=20µl TOTAL


  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,91 µl P680
4,89 µl P578
2 10x T4-ligase buffer
10,2 µl dd H20
=20µl TOTAL
  • To each ligation batch a negative control was mixed by adding the same volum of ddH20 instead of insert-DNA
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite



Picking of E. coli XL-Blue cells, transformated with ligation product of P751+P752

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation product of P751+P752.

Procedure:

  • 4 colonies of the transformation with P751+P752 (CamR) and were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Preparative digestion and gelelectrophoresis of P687+P690

Investigator: Jeff

Aim of the experiment: Preparative digestion of P687 (EcoRI-HF+SpeI-HF), P690 (EcoRI-HF+XbaI).

Procedure:

  • Reaction batch for digestion of P687 with EcoRI-HF+SpeI-HF:
volume reagent
20 µl P687
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P690 with EcoRI-HF+XbaI:
volume reagent
20 µl P690
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl XbaI (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch was incubated at 37 °C for 2.5 h.
P687 EcoRI-HF + SpeI-HF 1 kbp DNA ladder P690 EcoRI-HF + XbaI
Lower band was cut out (1283 bp, 37.6 ng/µl) Band was cut out (3021 bp, 105.6 ng/µl)

TUM12 20120912 prep gel P687 P690.jpg

  • Gel extraction was carried out after manufacturer's protocol (Qiagen).

Cycled ligation of P765+P764 and P751+P752

Investigator: Jeff

Aim of the experiment: Cycled ligation of P765+P764 (1:3) and P751+P752 (1:6).

Procedure:

  • Ligation batch for P765+P764 (1:3):
volume reagent
0.94 µl P765 (105.6 ng/µl, 3021 bp)
3.35 µl P764 (37.6 ng/µl, 1283 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
12.71 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P751+P752 (1:6):
volume reagent
1.25 µl P751 (80.3 ng/µl, 3316 bp)
5.21 µl P752 (34.3 ng/µl, 988 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
10.54 µl ddH2O
=20 µl TOTAL
  • Negative controls were als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batches and were called: P765 NK and P751 NK.
  • Cycled ligation has been performed after following protocol in a thermocycler overnight:
infinite cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Oligohybridization of oligo-nucleotides for creating mini MCS for cloning RFC10 compatible parts between promoter and terminator

Investigator: Jeff

Aim of the experiment: Oligohybridization of oligo-nucleotides for creating mini MCS for cloning RFC10 compatible parts between promoter and terminator.

Operational sequence:

  • 25 µL of 100 µM of Mini MCS fw pSB oligos (O92) and 25 µL of 100 µM MCS pSB1 rv neu oligos (O128) was pooled together in one ERG
  • Heating up to 90 °C for 5 min
  • Cooling at RT in a styropor box overnight.

SDS-PAGE of Thaumatin (pTUM104_Preprothaumatin in S. cerevisiae)

Investigator: Martin, Alois

  • Separation gel: 1.75 ml H20, 2 ml Acrylamid-Bis (30 % w/v), 1.25 ml 4x Lower Tris, 4 μl TEMED und 40 μl APS (10 % w/v).
  • Collection gel: 1.75 ml H20, 0.5 ml Acrylamid-Bis (30 % w/v), 0.75 ml 4x Upper Tris, 4 μl TEMED und 40 μl APS (10 % w/v).
  • Marker mix: 6 µl marker, 6 μl H2O and 4 μl 5x loading dye (non reducing) => 15 µl.
  • Sample mix: 16 μl sample (pot. diluted), 4 µl 5x Auftragspuffer (non reducing) => 15 µl.
  • Electrophoresis: Ca. 10 min, 80 V; then 120 V; about 2 h until bromphenol blue marker reaches the bottom of the gel.
  • The separatory gel was swivelled 20 min in Coomassie, 15 min in Entfärbelösung 1 and then in Entfärbelösung 2.
  • SDS-PAGE1 (non reducing): M/S1/S2/0h/2h/4h/6h/8h/10h/24h.
  • SDS-PAGE2 (non reducing): M/S1/S2/0h/2h/4h/6h/8h/10h/24h.

Thaumatin: 22,2 kDa.

Result:

Transformation of clone 1 into E. coli

Investigator: Andrea

Aim of the experiment: Transformation of clone 1 (Miniprep 11.09.) into E. coli XL1-Blue

Procedure:

  • 1µl of each miniprep product were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates (two plates).
  • incubation over night (37°C)

Protein Purification of Limonensynthase

Investigator: Andrea

Aim of the experiment: Purification of Limonensynthase via Streptavidin column (1.6)

Procedure:

  • reaching baseline with 1x SA buffer
  • binding of proteins
  • elution of limonenesynthase with 1x SA buffer + 5 mM Biotin
  • washing of pipes and column with 1x SA buffer (eight fold of column volume) and ddH2O

Concentration:

  • made by Alois
  • LS: 0.539 mg/ml
  • concentrated protein is stored at -20°C (upper drawer)

Staining with Ponceau's reagent and western blot analysis of protein crude extract of CaXMT1, CaMXMT1 and eGFP transformants after 20 minutes and 20 hours of expression

Investigator: Saskia

Aim of the experiment:

Detection of expressed proteins CaDXMT1, eGFP.

Operational sequence:

The western blot membran (having been blocked over the night at 4°C) was washed with PBS- T0.1 four times (4x 15min). Because of the use of un- prestained protein marker (see Thursday, 6.9.), we stained the western blot membran with Ponceau's reagent and assigned the bands, followed by washing the membran with PBS- T0.1 again (15 minutes, 2x). Afterwards, the membran was incubated for 1h with detection reagent. Detection reagent:

  • 10ml 1xPBS
  • 0,2% BSA (0,02g have been weighted in)
  • 2µl anti body MABclassic

After incubating with the first antibody, the membran was washed again with PBS-T0.1 three times (3x 5min), followed by the incubation with the second antibody (anti mouse, fused with alk. phosphatase) for another our. Second detection reagent:

  • 10ml 1xPBS
  • 0,2% BSA (see above)
  • 5µl AntiMouse-alk. Phosphatase conjugate (1/2000 dilution)

The development was performed after washing the membran with PBS- T0.1 for 10 min (two times) and with 1xPBS for 10 min (two times). For this, the membran was shortly washed with AP buffer and then incubated with a solution containing 15ml AP buffer, 45µl BCIP (50mg/ml in DMF) and 7,5µl NBT (75mg/ml in 70% DMF) for a few minutes, until clear bands appeared.

Western blot membran:

TUM12 CaDXMT1.jpg

From left to right:

Prestained protein marker (Page Ruler Plus) eGFP crude extract CaDXMT1 crude extract Unstained protein marker (pen marking)

Analytic digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator

Investigator: Dennis

Aim of the experiment: analytic triple digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator, B3D_2+ADH1 terminator (plate 5)

Procedure:

  • Reaction batch:
volume reagent
5 µl B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator
2 µl NEBuffer 4 (10x)
0,5  µl EcorI (20 U/µl)
0,5 µl PstI-HF (20 U/µl)
1 µl EcoR53kI (10 U/µl)
11 µl ddH2O
=20 µl TOTAL

Cell lysis of 200ml culture of CaDXMT1 after 24h after expression induction

Investigator: Daniela, Saskia

Aim of the experiment:

Cell lysis of yeast cells- taken 24h after expression.

Operational sequence:

  • centrifugation for 10 min at 14000 rpm (4x 50 ml Falcons)
  • discard supernatant
  • the pellets were resuspended in breaking buffer without PMSF and centrifugated at 14000 rpm for 5 min; discard supernatant
  • an adequate amount of breaking buffer containing PMSF (OD:13.6) was given to the cell pellet, as well as an equal amount of glass beads.
  • cell- walls were disrupted by vortexing for 30 sec, followed by 30 sek on ice. This procedure was repeated 30 times.
  • centrifugation and storage of the supernatant at -20°C

Analytic gel electrophoresis

experimenter: Dennis

  • 1 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • analytic gelelectrophoresis was perforemd at 90 V for 1 h.
1 kbp DNA ladder pSB1C3 CaMXMT1 ( B2A 1, new) pSB1C3 CaMXMT1 ( B2A 2, new) pSB1C3 CaMXMT1 ( B2A 3, new) pSB1C3 CaMXMT1 ( B2A 4, new) pSB1C3 CaMXMT1 ( B2A ) pSB1C3 CaMXMT1 ( B1B ) pSB1C3 CaMXMT1 ( B3D ) pSB1C3 CaMXMT1 ( negativ: B3D without ADH1 )
1 kbp DNA ladder

20120907 analytgel.png


Quick Change mutagenesis to remove mutations found by sequencing in our gene constructs

Investigator: Ingmar

Aim of the experiment: Deletion of found mutations.

Operational sequence


1. PCR general setup
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)


PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.

2. Used constructs and primers

Quickchange number Plasmid number Geneconstruct Primer number Primer
QC 1P769CHS- pSB1C3 sdm c614tO98 & O99t375c
QC 2P774PAL- pSB1C3O110 & O111c869t
QC 3P775PAL+ pSB1C3O110 & O111c869t
QC 4P772PAL+ pYesO110 & O111c869t
QC 5P745CHS- pYes LimonenO104 & O105c614t
QC 6P748OMT- pYes LimonenO96 & O97a1055g
QC 7P137OMT+pSB1C3O96 & O97a1055g
QC 8P739PAL+ pYes LimonenO110 & O111c869t
QC 9P740PAL- pYes LimonenO110 & O111c869t
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Thursday, September 13th

Transformation of E.coli XL1-blue with ligation batches from 12.9

Investigator:Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on chloramphenicole plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new CAM plates.

Miniprep of pTUM104 with TEF2-P

  • plasmid-extraction was done according to quiaprep plasmid extraction protocoll


Preparative digestion of pTUM102-P,pTUM101-P, pTUM103-P, Limonensynthases

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
4 µl PstI-HF (Ferm)
2 µl SpeI (NEB)
4 µl 10x Tango-buffer
4 µl 10xNEB 4 buffer
0,4 µl 100 BSA
27,6 µl dd H20
=40 µl TOTAL
  • To 40 µl reaction batch 40 µl of pTUM104-TEF2-P were added.

Investigator: Georg'

  • Reaction batch for digestion:
volume reagent
4 µl PstI-HF (Ferm)
1 µl SpeI (NEB)
2 µl 10x Tango-buffer
2 µl 10xNEB 4 buffer
0,2 µl 100 BSA
11,8 µl dd H20
=20 µl TOTAL
  • To 20 µl reaction batch 20 µl of pTUM104-TEF1-P were added

Investigator: Georg'

  • Reaction batch for digestion:
volume reagent
4 µl PstI-HF (Ferm)
1 µl SpeI (NEB)
2 µl 10x Tango-buffer
2 µl 10xNEB 4 buffer
0,2 µl 100 BSA
10,8 µl dd H20
=20 µl TOTAL

Investigator: Georg'

  • Reaction batch for digestion:
volume reagent
4 µl PstI-HF (Ferm)
1 µl SpeI (NEB)
2 µl 10x Tango-buffer
2 µl 10xNEB 4 buffer
0,2 µl 100 BSA
10,8 µl dd H20
=20 µl TOTAL
  • To 20 µl reaction batch 20 µl of pTUM104-ADH1-P were added

Investigator: Georg'

  • Reaction batch for digestion:
volume reagent
4 µl PstI-HF (Ferm)
2 µl XbaI (Ferm)
4 µl 10x Tango-buffer
2 µl 10xNEB 4 buffer
0,2 µl 100 BSA
10,8 µl dd H20
=20 µl TOTAL
  • To 20 µl reaction batch 20 µl of Limonensynthases in psb1c3
  • Digestions took place for 3 hours at 37 C

20120913 20120913 Präp.Vedau PyesII-TUM-TEF2-P mit SpeI-HF und PSTI.png 20120914 Limonens (xbaI+pstI), und Tef1P in pYes2 und ADHP in pyes2.png


gelextraction of digested pTUM102 (P806)

Investigator: Georg

  • Gelextraction was done according to quiaquick gel extraction kit protocoll

Miniprep of overnight expansion E. coli XL-Blue cells culture, transformated with ligation product P751+P752

Investigator: Jeff

Aim of the experiment: Miniprep of overnight expansion E. coli XL-Blue cells culture, transformated with ligation product P751+P752.

Procedure:

  • Miniprep was done after manufacturer's protocol (P685-P688). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of P785-P788

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P785-P788 with EcoRI-HF+SpeI-HF+PvuII.

Procedure:

  • Digestion of P785-P788 with EcoRI-HF+SpeI-HF+PvuII:
volume reagent
2.5 µl Plasmid DNA (P785-P788)
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl EcoRI-HF (20 U/µl) (NEB)
0.25 µl SpeI-HF (20 U/µl) (NEB)
0.50 µl PvuII (10 U/µl) (NEB)
14.3 µl ddH2O
=20 µl TOTAL


  • Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.
  • 2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.
  • 10 µl of these mixes were loaded in the gel pockets.
  • Analytical gelelectrophoresis was performed at 90 V for 60 min on an 1% agarose gel.
1 kbp DNA ladder P785 P786 P787 P788 P751 P752
Too much bands visible. Furhter analysis required. Too much bands visible. Furhter analysis required. Too much bands visible. Furhter analysis required. Too much bands visible. Furhter analysis required. Only for control of prep. digestion Only for control of prep. digestion

TUM12 20120913 anal gel 785 P788.jpg

  • Further analytical digestion and gelelectrophoresis with only EcoRI-HF+SpeI-HF have to be carried out to make sure that ligation was successful.
  • Please see next analytical digestion and gelelectrophoresis section with only EcoRI-HF and SpeI-HF for end results.

Analytical digestion and gelelectrophoresis of P785-P788 II

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P785-P788 with EcoRI-HF+SpeI-HF.

Procedure:

  • Digestion of P785-P788 with EcoRI-HF+SpeI-HF+PvuII:
volume reagent
2.5 µl Plasmid DNA (P785-P788)
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
0.25 µl EcoRI-HF (20 U/µl) (NEB)
0.25 µl SpeI-HF (20 U/µl) (NEB)
14.8 µl ddH2O
=20 µl TOTAL


  • Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.
  • 2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.
  • 10 µl of these mixes were loaded in the gel pockets.
  • Analytical gelelectrophoresis was performed at 90 V for 90 min on an 1% agarose gel.
1 kbp DNA ladder P785 P786 P787 P788
Ligation NOT successful! Ligation successful! Ligation successful! Ligation successful!

TUM12 20120913 anal gel P785 P788 V2.jpg

  • Last ligation step to SV40NLS-PhyB(908NT)-20aaLinker-Gal4DBD/LexA+TEF1-terminator nescessary and cloning whole expression casette battery into pSB6A0 with EcoRI-HF and SpeI-HF because pSB6A0 still contains at least one of the forbidden restriction sites XbaI or PstI.

Preparative digestion of P786, P693, P697

Investigator: Jeff

Aim of the experiment: Preparative digestion of P786 (EcoRI-HF+SpeI-HF), P693 (EcoRI-HF+XbaI), P697 (EcoRI-HF+XbaI).

Procedure:

  • Reaction batch for digestion of P786 with EcoRI-HF+SpeI-HF:
volume reagent
20 µl P786
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P693 with EcoRI-HF+XbaI:
volume reagent
19 µl P693
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl XbaI (20 U/µl)
14.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P697 with EcoRI-HF+XbaI:
volume reagent
20 µl P697
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl XbaI (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL


Sequencing

Investigator: Lara, Andrea

Aim: Sequencing to check whether insert is wrong. Miniprep products of 11.09. (2: pSB1C3/TEF1/LS, 3: pSB1C3/PCR1(LS) ) were sequenced. Additionally probes of Dennis (B2A, B1B, B3D, B3D5) were sequenced.

  • 3 (8): Primer VF2, VR
  • 2 (5): Primer VF2
  • 2 (7): Primer VF2
  • B2A: Primer VF2
  • B2A: Primer VR
  • B1B: Primer VF2
  • B1B: Primer VR
  • B3D: Primer VF2
  • B3D: Primer VR
  • B3D5: Primer VF2
  • B3D5: Primer VR

Picking of colonies of clone 1 (miniprep 11.09.)

Investigator: Andrea

Procedure:

  • Picking of 1 clone of pSB1C3/TEF2/LS (transformation 8th August)
  • add 4 µl Chloramphenicol
  • Inbucation at 37°C (shaker) over night.

Preparative restriction digest of pSB1C3/TEF2/LS (Miniprep 11.09.) and pSB1C3/TEF1/LS

Investigator: Andrea, Lara

Aim: Prepare backbone for Promotor-LS-Terminator construct in pSB1C3.

pSB1C3/TEF2/LS

volume reagent
15  µl Plasmid (clone 1, miniprep 11.09.)
4  µl Buffer Tango, Fermentas (10x)
1  µl Spe-HF (20 U/µl), NEB
2.5  µl PstI (10 U/µl), Fermentas
18 µl ddH2O
=40.5 µl TOTAL

pSB1C3/TEF1/LS

volume reagent
10  µl Clone 2(5) DNA (miniprep 11.09.)
4  µl Buffer Tango, Fermentas (10x)
1  µl SpeI (20 U/µl), NEB
2.5  µl PstI (10 U/µl), Fermentas
23  µl ddH2O
=40.5 µl TOTAL
  • plasmids were digested at 37 °C for 3 hours. THe samples were stored at the lowest drawer of -20°C over night (50 ml Falcon, label: "Präp Verdau, Lara, 13.9.").

Miniprep of clones with Psb1C3_TEF1P_Thaumatin_TEF1T and Integ-Vec_TEF1P_Thaumatin_TEF1T

Investigat0r: Martin Results:: P792-P801

Midiprep of clone with Integ-Vec_mOrange-cassette

Investigat0r: Martin Results:: P802

Friday, September 14th

Gelextraction of digested pTUM104-TEF1-P, pTUM104-ADH1-P, Limonensynthases from 23.9

Investigator: Georg

  • Gelextraction was performed according to quiaquick gelextraction kit protocoll

Nanodrop measurement

Investigator: Georg,Mary

  • pTUM104-TEF1 (P809): 22.2 ng/µl
  • pTUM104-ADH1 (P807): 27.2 ng/µl
  • Limonensynthases (P810): 13.3 ng/µl
  • New Multiple Cloning Site (P808): 150 ng/µl
  • pTUM104-TEF2-P(P806): 122 ng/µl

Ligation reaction of P809+P810, P806+P810, P807+P810, P571 (psb1c3-vector)+ P808, P571+ P812, P809+ P791, P807+ P791, P809+ P791

Investigator: Georg

Procedure:

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
4,04 µl P809
6,26 µl P810
2 10x T4-ligase buffer
6,7 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
0,82 µl P806
6,88 µl P810
2 10x T4-ligase buffer
9,3 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,67 µl P807
6,63 µl P810
2 10x T4-ligase buffer
6,7 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
2,54 µl P571
2,08 µl P810
2 10x T4-ligase buffer
14,05 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
2,08 µl P571
7,22 µl P812
2 10x T4-ligase buffer
7,7 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
4,53 µl P809
1,97 µl P791
2 10x T4-ligase buffer
10,5 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
0,82 µl P806
1,88 µl P791
2 10x T4-ligase buffer
14,3 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
3,67 µl P807
1,89µl P791
2 10x T4-ligase buffer
11,44 µl dd H20
=20µl TOTAL
  • For each Vector, a negative control was made
  • Cycled ligation was performed as follows


  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite


Transformation of with ligation batches clone1 + P681, clone2+ p681, clone2 + P642

Investigator:Georg


Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on chloramphenicole plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new CAM plates.

Miniprep, of TEF2-P-Thaum, TEF1-P-Thaum, ADH1-P-Thaum in pTUM104

Investigator: Georg

  • Miniprep was performed according to quiaprep miniprep kit protocoll

Analytical digestion and gelelctrophoresis of extracted DNA from transformants with Limonens.-pTUM102, Thaum-pTUM102 , Thaum-pTUM101,Thaum-pTUM103

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
3,25 µl EcorI-HF (NEB)
3,25 µl PstI
26 µl NEB-4 buffer
195 µl dd H20
=227,5 µl TOTAL
  • To 17,5 µl reaction batch 2,5 µl DNA was added and digested for 1 h at 37 C
  • Gelelectrophoresis was run on 1% analytical agarose gels at 90 V for 1 hour

20120915 Anal. Digest. pYES + TEF1P-Thaum, ADH1-P+Thaum.png 20120915 Pyes +TEF2P-Thaum, TEF2-P-Limonens.png


Preparative gelelectrophoresis of preparative digestion of P786, P693, P697

Investigator: Mary, Jeff

Aim of the experiment:

Procedure:

  • 4.44 µl of DNA loading buffer (10x) were added to reaction mixes after incubation time and loaded on an 1% preparative agarose gel.
  • Preparative gelelectrophoresis was performed 1.5 h at 70 V.
1 kbp DNA ladder P786 EcoRI-HF + SpeI-HF 1 kbp DNA ladder P693 EcoRI-HF + XbaI 1 kbp DNA ladder P697 EcoRI-HF + XbaI

TUM12 20120914 prep gel Fehlversuch.jpg

  • No bands were cut out because it seems that SpeI-HF doesn't work (It was the last rest in the tube, so it seems that it was only condensed water.

Preparative digestion and gelelectrophoresis of P786, P692, P696

Investigator: Jeff

Aim of the experiment: Preparative digestion and gelelectrophoresis of P786 (SpeI-HF+PstI-HF), P692 (XbaI-HF+PstI-HF), P696 (XbaI-HF+PstI-HF).

Procedure:

  • Reaction batch for digestion of P786 with SpeI-HF+PstI-HF:
volume reagent
20 µl P786
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl SpeI-HF (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P692 with XbaI-HF+PstI-HF:
volume reagent
20 µl P692
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI-HF (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P696 with XbaI-HF+PstI-HF:
volume reagent
20 µl P696
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI-HF (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch was incubated at 37 °C for 2.5 h.
1 kbp DNA ladder P786 SpeI-HF + PstI-HF P692 XbaI + PstI-HF P696 XbaI + PstI-HF
Band was cut out (4290 bp, 68.4 ng/µl) Upper band was cut out (3848 bp,82.0 ng/µl) Upper band was cut out (4013 bp, 77.5 ng/µl)

TUM12 20120914 prep gel P786 P692 P696.jpg

Cycled ligation of P803+P804, P803+P805, P663+P791

Investigator: Jeff

Aim of the experiment: Cycled ligation of P803+P804, P803+P805, P663+P791.

Procedure:

  • Ligation batch for P803+P804 (1:3):
volume reagent
1.46 µl P803 (68.4 ng/µl, 4290 bp)
3.27 µl P804 (82.0 ng/µl, 3848 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
12.27 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P803+P805 (1:3):
volume reagent
1.46 µl P803 (68.4 ng/µl, 4290 bp)
3.6 µl P805 (77.5 ng/µl, 4013 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
11.94 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P663+P791 (1:3):
volume reagent
12.82 µl P663 (7.8 ng/µl, 3578 bp)
2.96 µl P791 (27.1 ng/µl, 956 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
1.22 µl ddH2O
=20 µl TOTAL
  • Negative controls were als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batches and were called: P803 NK and P663 NK.
  • Cycled ligation has been performed after following protocol in a thermocycler overnight:
400x 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Preparing plates with minimal media (URA-, TRP- and URA-, TRP-, HIS -) for LiAc transfection of S. cerevisiae Y190 and INVSc1 strain

Investigator: Mary, Jeff, Katrin

Aim of the experiment: Preparing plates with minimal media (URA-, TRP- and URA-, TRP-, HIS -) for LiAc transfection of S. cerevisiae Y190 and INVSc1 strain.

Procedure:

Miniprep of clones (13.09.)

Investigator: Katrin

Aim: Get more plasmid DNA of positive clone 1

concentrations:

  • clone 1_1: 254,8 ng/µl
  • clone 1_2: 241,5 ng/µl


Preparative gelelectrophoresis of pSB1C3/LS/Prom and Terminator digested on 13th September

Investigator: Andrea

Gelelectrophoresis:

LS/pSB1C3/Prom: 4500 bp

14.09.12 prepgel bearbeitet.png

Ligation of pSB1C3/LS/TEF1 and pSB1C3/LS/TEF2 with CYC1-Terminator and/or TEF1-Terminator

Investigator: Andrea

Procedure

clone 1 with P681 (CYC1)

Substance Volume
clone 6.61 µl
P681 1.398 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

Negative control water in clone 1

Substance Volume
clone 6.61 µl
ddH2O 1.398 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

clone 2 with CYC1 (P681)

Substance Volume
clone 2 5.89 µl
P681 2.11 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

Negative control water in clone 2

Substance Volume
clone 2 5.89 µl
ddH2O 2.118 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

clone 2 with TEF1 (P642)

Substance Volume
clone 2 4.11 µl
TEF1 3.898 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl
  • Trafo made by Georg
  • rest of ligation solution incubated over the weekend at RT --> now stored at -20°C in a 50ml Falcon tube in the middle drawer (label: Ligierung 14.09. Andrea)

SDS Page of pTUM104_thaumatin expression experiment's cell lysates

Investigator: Katrin, Martin

Aim: To find that frigging Thaumatin

Results:

  • Thaumatin: 22,2 kD


SDS Page: 09142012 zellaufschluss sds page genomintegration TUM12.jpg


Nowhere to be found.

Preparation of competent SCV-I cells

Investigator: Martin

Procedure: Competent cells were prepared with the S.c. EasyComp Transformation Kit by invitrogen.

Preparative digest of P793 and P802 with Sbf1 (for integrative transformation in yeast)

Investigator: Martin Aim: Integrational vectors with thaumatin (P793) and mOrange (P802) inserts were preparatively digested with Sbf1 to achieve linearization. Procedure:

Transformation in yeast with P793 and P802 (digested with Sbf1)

Investigator: Martin, Alois van de Uckermark

Procedure: According to the manual with the S.c. EasyComp Yeast Transformation Kit by invitrogen.

Inoculation of 2 l SC-U (2 % galactose) with overnight culture of yeast strain carrying pTUM104_thaumatin

Investigator: Martin

Aim: Expression of thaumatin

Procedure: 2 l SC-U medium with 2 % galactose were inoculated with the cells harvested in 100 ml preparatory culture transformed with pYES_thaumatin.

Miniprep of E.Coli over night cultures

Investigator: Dennis

Aim of experiment:

Isolation of plasmids: B2A_3+ADH1 terminator (1), B1B_2+ADH1 terminator (2), B3D_3+ADH1 (4) terminator for further usage.

Operational sequence:

The plasmid preparation was done with the Quiagen Plasmid Miniprep Kit as previously described. Elution was performed with 40µl of elution buffer, heated up to 37°C. Before final centrifugation, the column was incubated for 2 minutes at 37°C.


Sequencing analysis

Investigator: Dennis

Aim: Sequence analysis to check the right sequence of the constructs. Miniprep products of B2A, B1B, B3D, B3D5 were sequenced and with the programm genoius pro analysed


  • B2A: Primer VF2
  • B2A: Primer VR
  • B1B: Primer VF2
  • B1B: Primer VR
  • B3D: Primer VF2
  • B3D: Primer VR
  • B3D5: Primer VF2
  • B3D5: Primer VR

Saturday, September 15th

Transformation of E. coli XL1-Blue with ligation products P803+P804, P803+P805, P663+P791

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P803+P804, P803+P805, P663+P791

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P803+P804, P803+P805, P663+P791) and it's negative controls (P803 NK, P663 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on suitable antibiotic plates (P803+X: CamR, P663+X: AmpR, KanR).
  • The rest of the suspension was centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and was plated again on antibiotic plates.
  • Incubation at 37 °C overnight.

Picking of pTUM104-TEF1-Limonensynthases

Investigator: Jeff

Aim of the experiment: Picking of pTUM104-TEF1-Limonensynthases for brewing experiments and promoter characterization.

Procedure:

Preperative digestion of B2A, B1B, B3D

Investigator: Dennis

Aim of the experiment: after the sequences of the constructs were succsesful, we started a preperative digestion of the constructs to fuse them together. Therefor the constructs B2A and B3D will be cut out, by XbaI and PstI and finally purified of the plasmid backbone with gelelectrophoresis

Procedure:

  • Reaction batch:
volume reagent
30 µl B2A, B3D
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
2 µl XbaI (20 U/µl)
2 µl PstI-HF (20 U/µl)
10,5 µl ddH2O
=50 µl TOTAL
  • Reaction batch:
volume reagent
30 µl B1B
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
2 µl SpeI (20 U/µl)
2 µl PstI-HF (20 U/µl)
10,5 µl ddH2O
=50 µl TOTAL

Transformation of E. coli

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with the sequenced constructs CaXMT1, CaMXMT1

Procedure:

  • 20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Quick Change mutagenesis to remove mutations found by sequencing in our gene constructs

Investigator: Ingmar

Aim of the experiment: Deletion of found mutations.

Operational sequence


1. PCR general setup
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)


PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.

2. Used constructs and primers

Quickchange number Plasmid number Geneconstruct Primer number Primer
QC 1P783OMT+ pSB1C3O96 & O97a1055g
QC 2P138OMT- pSB1C3O96 & O97a1055g
QC 3P813CHS+ pYes LimonenO104 & O105c614t
QC 4P814OMT+ pYes LimonenO96 & O97a1055g
QC 5P822PAL+ pYes LimonenO108 & O109a770g
QC 6P823PAL- pYes LimonenO108 & O109a770g
QC 7P719PAL- pYesO108 & O109a770g
QC 8P818PAL+ pYesO106 & O107t667g
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Sunday, September 16th

Picking of E. coli XL-Blue cells, transformated with ligation products P803+P804, P803+P805, P663+P791

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products P803+P804, P803+P805, P663+P791.

Procedure:

  • 4 colonies of each transformation with P803+P804 (CamR), P803+P805 (CamR), P663+P791 (CamR, AmpR) were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Analytical digestion and gelelectrophoresis of pTUM104-TEF1-P-Limonensynthases

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of Limonens.-pTUM101 to check whether Limonensythase was successfully cloned downstream of the pTUM101 for constitutive expression in yeast.

Week 15

Monday, September 17th

Picking of colonies with ligations 806 + 810 , P571 + 808, P571 + P812, P809 + P791, P807 + P791

Investigator: Georg

  • colonies were picked and transferred to 5 µl LB-medium with 1x Ampicillin ( 806 + 810,P809 + P791, P807 + P791)

and CAM (P571 + 808, P571 + P812)

  • picked colonies were incubated over night at 37 C

Ligation of P492 + P808, P493 + P808, P494 + P808, P806 + P791

Investigator: Georg

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,09 µl (=100 ng) P492
0,31 µl P808/10
1 10x T4-ligase buffer
16,6 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,74 µl (=100 ng) P493
0,34 µl P808/10
1 10x T4-ligase buffer
14,92 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
4,51 µl (=100 ng) P494
0,31 µl P808/10
1 10x T4-ligase buffer
12,18 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
0,82 µl (=100 ng) P806
0,31 µl P791
1 10x T4-ligase buffer
14,3 µl dd H20
=20µl TOTAL
  • DNA was heated for 5 min at 60 C and cooled on ice before T4-ligase buffer was added
  • Cycled ligation was done at following conditions
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite


Transformation of E.coli Xl1-blue competent cells with ligation batches

Investigator: Georg


Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on chloramphenicole plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new CAM plates.

Miniprep of overnight expansion E. coli XL-Blue cells culture, transformated with ligation products P803+P804, P803+P805, P663+P791

Investigator: Jeff

Aim of the experiment: Miniprep of overnight expansion E. coli XL-Blue cells culture, transformated with ligation products P803+P804, P803+P805, P663+P791.

Procedure:

  • Miniprep was done after manufacturer's protocol (P840-P843: P803+P804, P844-P847: P803+P805, P848-P851: P663+P791). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of P840-P851

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P840-P851.

Procedure:

  • Mastermix for analytical digestion with EcoRI-HF+SpeI-HF+PvuII:
volume reagent
26 µl NEBuffer 4 (10x)
2.6 µl BSA (100x)
3.25 µl EcoRI-HF (20 U/µl) (NEB)
3.25 µl SpeI-HF (20 U/µl) (NEB)
192.4 µl ddH2O
=227.5 µl TOTAL
  • 17.5 µl of the mastermix were added to 2.5 µl of plasmid DNA of P840-P851.
  • Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.
  • 2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.
  • 10 µl of these mixes were loaded in the gel pockets.
  • Analytical gelelectrophoresis was performed at 90 V for 90 min on an 0.5% agarose gel.
1 kbp DNA ladder P840 P841 P842 P843 P844 P845 P846 P847
Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation failed!

20120917 anal gel P840-P847.jpg

1 kbp DNA ladder P840 P841 P842 P843
Ligation successful! Ligation successful! Ligation successful! Ligation successful!

20120917 anal gel P848-P851.jpg

Preparative digestion of P304, P564, P515

Investigator: Jeff

Aim of the experiment: Preparative digestion and gelelectrophoresis of P304 (EcoRI-HF+XbaI), P564 (EcoRI-HF+SpeI-HF), P515 (XbaI+PstI-HF).

Procedure:

  • Reaction batch for digestion of P304 with EcoRI-HF+XbaI:
volume reagent
20 µl P304
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl XbaI (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P515 with XbaI+PstI-HF:
volume reagent
20 µl P515
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl XbaI (20 U/µl)
1 µl PstI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P564 with EcoRI-HF+SpeI-HF:
volume reagent
20 µl P564
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Preparative digestion was performed for 2.5 h at 37 °C.
  • Digested samples were freezed at -20 °C for preparative gelelectrophoresis on the next days.

Second preparative gelelectrophoresis of P804, P805

Investigator: Jeff

Aim of the experiment: Second preparative gelelectrophoresis of P804, P805, to remove vector contamination because first gelelectrophoresis was not efficient enough to purificate the insert.

Procedure:

  • The samples was loaded with 4 µl of DNA loading buffer (10x) and preparative gelelectrophoresis was performed on an 1% agarose gel at 70 V for 2 h.
1 kbp ladder P804 P805
Upper band was cut out Upper band was cut out

TUM12 20120917 prep gel P804 P805.jpg

Picking of E. coli XL-Blue cells, transformated with ligation products P803+P804, P803+P805

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products P803+P804, P803+P805.

Procedure:

  • 11 colonies of each transformation with P803+P804 (CamR), P803+P805 (CamR) were taken.
  • Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chlorampenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Cycled ligation of P803+P852, P803+P853

Investigator: Jeff

Aim of the experiment: Cycled ligation of P803+P852, P803+P853, in order to transform the next day, if the newly picked clones are again negative.

Procedure:

  • Ligation batch for P803+P852
volume reagent
1.46 µl P803 (68.4 ng/µl, 4290 bp)
9.44 µl P852 (28.5 ng/µl, 3848 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
6.1 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P803+P853
volume reagent
1.46 µl P803 (68.4 ng/µl, 4290 bp)
4.37 µl P853 (46.9 ng/µl, 4013 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
9.59 µl ddH2O
=20 µl TOTAL
  • Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batches and was called P803 NK.
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Over night cultures of INVSC-1 yeast cultures transformed with caffeine synthesis gene- constructs

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the prepare of over night cultures previously to an expression of the caffeine synthesis genes CaXMT1, CaMXMT1 and CaDXMT1. eGFP was used as positive control.

Operational sequence:

If possible, one single colony of plated transformants was used for inoculation of 20ml SC-U 2% glucose medium. Otherwise, a pipet dip was taken (if colony density was to high). Afterwards, the flasks were incubated at 30°C for about 12h.

Over night cultures of INVSC-1 yeast cultures transformed with caffeine synthesis gene- constructs

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the prepare of over night cultures previously to an expression of the caffeine synthesis genes CaXMT1, CaMXMT1 and CaDXMT1. eGFP was used as positive control.

Operational sequence:

If possible, one single colony of plated transformants was used for inoculation of 20ml SC-U 2% glucose medium. Otherwise, a pipet dip was taken (if colony density was to high). Afterwards, the flasks were incubated at 30°C for about 12h.

Over night cultures of INVSC-1 yeast cultures transformed with caffeine synthesis gene- constructs

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the prepare of over night cultures previously to an expression of the caffeine synthesis genes CaXMT1, CaMXMT1 and CaDXMT1. eGFP was used as positive control.

Operational sequence:

If possible, one single colony of plated transformants was used for inoculation of 20ml SC-U 2% glucose medium. Otherwise, a pipet dip was taken (if colony density was to high). Afterwards, the flasks were incubated at 30°C for about 12h.

Yeast Expression: S. cerevisiae INVSc1 CaXMT1, CaMXMT1, CaDXMT1 and eGFP (200 ml)

Investigator: Roman, Saskia

Aim: Induction of protein expression of CaXMT1, CaMXMT1, CaDXMT1 and eGFP in a larger scale (200ml) to have enough protein for enzymatic analysis

Operational sequence:

At first, the OD600 of the over night cultures from today (17.09.2012) were measured:

  • CaXMT1: 7.6/ml
  • CaMXMT1: 7.2/ml
  • CaMXMT1: 8.9/ml
  • eGFP: 8.8/ml

(1/10 dilutions have been prepared for measurment)

To obtain an OD of 0,4/ml in 200 ml of SC -URA 2% gal medium for CaXMT1, CaMXMT1, CaDXMT1 and 50ml of SC-URA 2% gal medium for eGFP, 10 ml, 11 ml, 9 ml and 2.27 ml of the over night cultures were centrifuged at 1500xg for 5 minutes at 4°C. Afterwards, the pellet was resuspended in 1ml SC -URA 2% gal. The suspension was then given to 49ml SC-URA 2% gal medium, followed by incubation at 180rpm and 30°C.

Miniprep of ligation products (ligation 14th September) and of clone 2 (5) (Trafo 8th September)

Investigator: Andrea

Concentrations

  • TEF2-P/LS/CYC-T (clone 1) 1: 113 ng/µl
  • TEF2-P/LS/CYC-T (clone 1) 2: 133.5 ng/µl
  • TEF2-P/LS/CYC-T (clone 1) 3: 121 ng/µl
  • TEF2-P/LS/CYC-T (clone 1) 4: 148 ng/µl
  • TEF1-P/LS/CYC-T (clone 2) 1: 68 ng/µl
  • TEF1-P/LS/CYC-T (clone 2) 2: 57 ng/µl
  • TEF1-P/LS/CYC-T (clone 2) 3: 143.5 ng/µl
  • TEF1-P/LS/CYC-T (clone 2) 4: 88 ng/µl
  • TEF1-P/LS/TEF1-T (clone 2) 1: 148.5 ng/µl
  • TEF1-P/LS/TEF1-T (clone 2) 2: 153 ng/µl
  • TEF1-P/LS/TEF1-T (clone 2) 3: 138 ng/µl
  • TEF1-P/LS/TEF1-T (clone 2) 4: 84 ng/µl
  • clone 2(5) 1: 115 ng/µl
  • clone 2(5) 2: 147 ng/µl


probes are stored in an disposal bag in the lower drawer (label: Miniprep 17.09. Andrea)

Analytical restriction digest of miniprep products

Investigator: Lara


volume reagent
2.5 µl plasmid DNA
0.25 µl EcoR1
0.25 µl Pst1- HF
2 µl NEB 4
0.2 µl BSA
14.8 µl ddH2O
  • incubation: 3 hours, 37°C


Gelelectrophoresis:

gel 1: marker, 1(1), 1(2), 1(3), 1(4), 2(1), 2(2), 2(3)

gel 2: marker, 2(4), 2-TEF(1), 2-TEF(2), 2-TEF(3), 2-TEF(4)

lengths:

TUM12 LS analytgel1 1709.png TUM12 LS analytgel2 1709.png

Miniprep of clones of tranformations done on saturday 15th september

Investigator: Ingmar

Aim of the experiment: Get purified DNA for transformation in yeast and stem preservation.

Procedure:

  • Using a Quiagen kit a miniprep of the overday culture was done.
  • The resulting purified DNA was aliquoted in new tubes labeled as follows:
Plasmid number Content Concentration
P831QC1 P137 OMT+pSB1C3 sdm a1055g64,4 ng/µl
P832QC2 P138 OMT-pSB1C3 sdm a1055g70,1 ng/µl
P833QC3 P813 CHS+pYes Limonen c614t164,5 ng/µl
P834QC4 P814 OMT+ pYes Limonen a1055g105,4 ng/µl
P835QC5 P822 PAL+pYes Limonen a770g69,8 ng/µl
P836QC6 P823 PAL-pYes Limonen a770g58,4 ng/µl
P837QC6 P823 PAL-pYes Limonen a770g Klon275,3 ng/µl
P838QC7 P719 PAL-pYes a770g68,9 ng/µl
P839QC8 P818 PAL+pYes t667g75,4 ng/µl

As the side directed mutagenesis of P823 lead to a low number of colonies it will be repeated.

Repeated quick change mutagenesis to remove mutations found by sequencing in our gene constructs

Investigator: Ingmar

Aim of the experiment: Deletion of found mutations.

Operational sequence


1. PCR general setup
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl DNA template
0.5 µl 1:10 dilution of appropriate Oligo (= 5 pmol)
17 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)


PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 6 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.

2. Used constructs and primers

Quickchange number Plasmid number Geneconstruct Primer number Primer
QC 1P823PAL- pYes Limonen c869t O108 & O109a770g
QC 2P838PAL- pYes sdm a770g O110 & O111c869t
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Tuesday, September 18th

Miniprep of picked colonies from 17.9

Investigator:Georg

  • Miniprep was performed according to quiaprep spin miniprep kit protocoll

Analytical digestion and gelelectrophoresis of picked colonies

Investigator:Georg


  • Reaction batch for digestion:
volume reagent
6,5 µl PstI-HF (NEB)
6,5 µl Xba
52 µl NEB-4 buffer
5,2 µl 100 x BSA (NEB)
384,8 µl dd H20
=455 µl TOTAL
  • 17,5 µl of reaction batch were mixed with 2,5 µl of DNA
  • Digestion took 1 h at 37 C
  • Gelelectrophoresis was run 1 h at 90 V

20120917 anal gel P827-P830.png 20120918 ADH1-P und Limonens.png 20120918 ADH1-P und P791.png 20120918 TEF1-P und P791.png

  • ligation of pTUM101 and pTUM103 with luciferase and limonensynthase was succesful

Miniprep of overnight expansion E. coli XL-Blue cells culture, transformated with ligation products P803+P804, P803+P805

Investigator: Jeff

Aim of the experiment: Miniprep of overnight expansion E. coli XL-Blue cells culture, transformated with ligation products P803+P804, P803+P805.

Procedure:

  • Miniprep was done after manufacturer's protocol. (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of ligation products P803+P804, P803+P805 from overnight expansion culture

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of ligation products P803+P804, P803+P805 from overnight expansion culture.

Procedure:

  • Mastermix for analytical digestion with XbaI+PstI-HF:
volume reagent
48 µl NEBuffer 4 (10x)
4.8 µl BSA (100x)
6 µl XbaI (20 U/µl) (NEB)
6 µl PstI-HF (20 U/µl) (NEB)
355.2 µl ddH2O
=420 µl TOTAL
  • 17.5 µl of the mastermix were added to 2.5 µl of plasmid DNA.
  • Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.
  • 2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.
  • 10 µl of these mixes were loaded in the gel pockets.
  • Analytical gelelectrophoresis was performed at 90 V for 90 min on an 0.5% agarose gel.
1 kbp DNA ladder P858 P859 P860 P861 P862
Ligation successful! Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation failed! Ligation successful! Ligation successful! Ligation successful! Ligation successful!

TUM12 20120918 anal gel P803+P804.jpg

1 kbp DNA ladder P863 P864 P865 P866 P867 P868 P869 P870 P871 P872
Ligation successful! Ligation failed! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful! Ligation successful!

TUM12 20120918 anal gel P803+P805.jpg

Preparative gelelectrophoresis of preparative digested P304, P564, P515

Investigator: Jeff

Aim of the experiment: Preparative gelelectrophoresis of preparative digested P304, P564, P515.

Procedure:

  • The stored digestion batches were gently thawed on ice.
  • 4.44 µl of DNA loading buffer (10x) were added to each digestion batch after incubation.
  • Preparative gelelectrophoresis was performed at 70 V on a 0.5% agarose gel for 2 h.
P304 (EcoRI-HF+XbaI) 1 kbp ladder P515 (XbaI+PstI-HF) P654 (EcoRI-HF+SpeI-HF)
Band was cut out Upper band was cut out Band was cut out

TUM12 20120918 prep gel P304 P515 P564.jpg

Preparative digestion of P850, P860, P870

Investigator: Jeff

Aim of the experiment: Preparative digestion and gelelectrophoresis of P850 (EcoRI-HF+SpeI-HF), P860 (EcoRI-HF+SpeI-HF), P870 (EcoRI-HF+SpeI-HF).

Procedure:

  • Reaction batch for digestion of P850 with EcoRI-HF+SpeI-HF:
volume reagent
20 µl P850
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P860 with EcoRI-HF+SpeI-HF:
volume reagent
20 µl P860
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Reaction batch for digestion of P870 with EcoRI-HF+SpeI-HF:
volume reagent
20 µl P870
4 µl NEBuffer 4 (10x)
0.4 µl BSA  (100x)
1 µl EcoRI-HF (20 U/µl)
1 µl SpeI-HF (20 U/µl)
13.6 µl ddH2O
=40 µl TOTAL
  • Preparative digestion was performed for 2.5 h at 37 °C.
  • 4.44 µl of DNA loading buffer (10x) were added to each digestion batch after incubation.
  • Preparative gelelectrophoresis was performed at 70 V on a 0.5% agarose gel for 2 h.
P850 (EcoRI-HF+SpeI-HF) 1 kbp ladder P860 (EcoRI-HF+SpeI-HF) P870 (EcoRI-HF+SpeI-HF)
Lower was cut out Upper band was cut out Upper band was cut out

TUM12 20120918 prep gel P850 P860 P870.jpg

Miniprep of over night cultures

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the isolation of pSB1C3 plasmids containing our three expression cartridges [Tef2PROM-CaXMT1-Adh1TER], [Tef1PROM-CaMXMT1-Adh1TER] and [Tef2PROM-CaDXMT1-Adh1TER]. After the isolation of these plasmids, we will perform a preparative digest with suitable enzymes, to generate the "caffeine synthesis device".

Operational sequence:

The plasmid isolation was done as previously described. Elution was carried out by using 40µl of elution buffer heated up to 37°C and incubating for 1 minute before the final centrifugation.

Afterwards, the concentration was determined with NanoDrop:

  • pSB1C3_[Tef2PROM-CaXMT1-Adh1TER]: 222,6 ng/µl
  • pSB1C3_[Tef1PROM-CaMXMT1-Adh1TER]: 180,3 ng/µl
  • pSB1C3_[Tef2PROM-CaDXMT1-Adh1TER]: 168 ng/µl

Preparative digest of the three expression cartridges [Tef2PROM-CaXMT1-Adh1TER], [Tef1PROM-CaMXMT1-Adh1TER] and [Tef2PROM-CaDXMT1-Adh1TER]

Investigator: Roman

Aim of the experiment:

Preparative digest previously to ligation (production of the "caffeine synthesis device"). To do this, we want to ligate the second and third expression cartridges consecutively on the first one. Since the length of the expression cassetts is almost the same as the vector backbone (pSB1C3), we make also use of the restriction enzyme Eco53KI which cuts that backbone, thereby enabling a satisfying separation on the agarose gel.

Operational sequence:

Reaction batches (for pSB1C3 plasmids with CaMXMT1 and CaDXMT1 cartridges)

Reagent Volume
Plasmid DNA 20µl (3,6 and 3,4 µg)
Xba1 RE 1µl
Pst1-HF RE 1µl
Eco52KI RE 2µl
10x NEBuffer 4 4µl
100x BSA 0,4µl
ddH2O 11,6µl

Reaction batch (for pSB1C3 containing CaXMT1 expression cartridge)

Reagent Volume
Plasmid DNA 20µl (4,4 µg)
Spe1-HF RE 1µl
Pst1-HF Re 1µl
10x NEBuffer 4 4µl
100x BSA 0,4µl
ddH2O 13,6µl

The reaction batches were incubated at 37°C for 2,5 hours. Afterwards, the fragments were separated by gel electrophoresis (90V, 1,5h).

Gel pictures:

TUM12 20120918 Expressionskassetten 1u2.jpg

From left to right:

DNA Ladder pSB1C3 with expression cartridge Tef2PROM-CaXMT1-Adh1TER digested with Spe1-HF and Pst1-HF pSB1C3 with expression cartridge Tef1PROM-CaMXMT1-Adh1TER digested with Xba1, Pst1-HF and Eco53KI DNA Ladder

TUM12 20120918 Expressionskassette3.jpg

From left to right:

pSB1C3 with expression cartridge Tef2PROM-CaDXMT1-Adh1TER digested with Xba1, Pst1-HF and Eco53KI

Note: Expected lenghts are:

  • pSB1C3 with CaXMT1 expression cartridge: ca. 4200bp
  • pSB1C3 with CaMXMT1 expression cartridge (triple digest):
    • ca. 2030bp (expression cartridge)
    • ca. 900bp (pSB1C3 backbone fragment 1)
    • ca. 1100bp (pSB1C3 backbone fragment 2)
  • pSB1C3 with CaDXMT1 expression cartridge (triple digest):
    • ca. 2050bp (expression cartridge)
    • ca. 900bp (pSB1C3 backbone fragment 1)
    • ca. 1100bp (pSB1C3 backbone fragment 2)

The required bands were cut out and purified by gel extraction.

Gel- extraction of separated fragments

Investigator: Dennis

Aim of the experiment:Extraction of DNA from agarose gel

  • Gel extraction was done using the Qiagen gel extraction kit

Determined concentrations (NanoDrop):

  • CaXMT1 with pSB1C3 backbone: 48 ng/µl
  • CaMXMT1- expression cartridge: 21 ng/µl
  • CaDXMT1- expression cartridge: 24ng/µl

Ligation of preparative digestion

Investigator: Dennis

Aim of the experiment: ligation was performed for CaXMT1+CaMXMT1, incubated at 16 °C over night

Yeast expression: Pelletizing 16 h after expression induction

Investigator: Roman

Aim of the experiment:

Aim of the experiment was to pellet the 200ml cell suspension 16h after expression induction, as well as to wash the pellet with water, followed by storage at -20°C until further usage.

Operational sequence:

At first, the OD600 of the suspensions was determined:

  • CaXMT1: n.a.
  • CaMXMT1: 2,9/ml
  • CaDXMT1: n.a.
  • eGFP: 8,9/ml

Note:

Unfortunately, (almost) no colonies have grown of CaXMT1 and CaDXMT1. This is a bit strange, because the same medium was used at the inoculation and all colonies had grown in the SC-U 2% glucose medium. The induction of the expression will be repeated with these transformants.

The taken samples were centrifuged at 1500xg for 5 minutes at 4°C (200ml in several steps, eGFP 50ml in one step) and washed with 10 and 5 ml water, respectively. Afterwards, the suspension was centrifuged again and resuspended in 2ml water. The suspension was repelleted again and stored at -80°C until further usage.

Preparation of over night cultures

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the preparation of over night cultures of E.Coli- cells, having been transformed with the CaXMT1-, CaMXMT1- and CaDXMT1- expression cartridges, in order to have a sufficient amount of the plasmids (i.e. composite parts).

Operational sequence:

A single colony grown on LB agar plates with chloramphenicol was picked and used for inoculation of 6ml liquid LB medium containing 6µl of a chloramphenicol solution (final concentration: 30µg/ml). Incubation was done at 37°C over night with 180 rpm.

Harvesting of cells (S. cervisiae + pTUM104_Preprothaumatin)

Investigator: Martin, Alois

Aim of the experiment:

  • 5. Determine the OD600 => 6.7. 6. Centrifuge the cells at 1,500 g for 5 minutes at 4°C. 7. Decant the supernatant (stored at 4°C; secreted thaumatin?). Resuspend cells in 8 ml of sterile water. 8. Transfer cells to a sterile centrifuge tube. Centrifuge samples for 30 seconds at top speed in the microcentrifuge. 9. Remove the supernatant. 10. Store the cell pellets at –80°C until ready to use. Proceed to the next section to prepare cell lysates to detect your recombinant protein (see next page).

Cell lysates:

  • 2. Resuspend fresh or frozen cell pellets in 10 ml of breaking buffer. Centrifuge at 1,500 g for 5 minutes at 4°C to pellet cells. 3. Remove supernatant and resuspend the cells in a volume (180 ml) of breaking buffer to obtain an OD600 of 50–100. Use the OD600 determined in Step 5, previous page, to calculate the appropriate volume of breaking buffer to use. 4. Add an equal volume of acid-washed glass beads. 5. Vortex mixture for 30 seconds, followed by 30 seconds on ice. Repeat eight times. 6. Centrifuge in a centrifuge for 10 minutes at maximum speed. 7. Remove supernatant and transfer to a fresh microcentrifuge tube.

Preperative restriction digest of miniprep products

Investigator: Katrin, Andrea, Lara


volume reagent
20 µl plasmid DNA
1 µl EcoR1
1 µl Spe1- HF
4 µl NEB 4
0.4 µl BSA
13.6 µl ddH2O
  • incubation: 4 hours, 37°C


Gelelectrophoresis:

lengths:

  • 1(4): 2800 bp
  • 2(3): 2400 bp
  • 2TEF(2): 2550 bp

18.09.2012 prepgel1 bearbeitet.png 18 09 2012 prepgel2.Tif

Enzyme assay and limonene extraction

Investigators: Andrea, Lara

Aim: Test functionality of purified enzyme.


Enzyme assay

All reactions and extractions were done in glass containers because limonene is very non-polar.


Enzyme assay was carried out in a total volume of 500 µl containing buffer (25 mM Tris-Cl, pH 7.5, 5 % glycerol, 1 mM DTT) supplemented with cofactors (10 mM MgCl2, 1 mg/ml BSA).


  • stock solutions were prepared:

1. 50 mM Tris-HCL pH 7.5 + 10 % glycerol

2. 1 M MgCl2


50 µM substrate (geranyl pyrophosphate, dissolved in DMSO) and 10 µg purified recombinant enzyme (extracted limonene synthase, after dialysis) were added.


volume reagent
250 µl 2 x Buffer (Tris-HCl, Glycerol)
5 µl 1 M MgCl2
0.5 µl 1 M DTT
5 µl 100 mg/ml BSA
2.5 µl GPP (10 mM)
18.5 µl Enzyme (10 µg)
218.5 µl ddH2O

The mixture was overlaid with 500 µl pentane (carefully, phases should not mix) and incubated at room temperature for 15 minutes. The reaction was stopped by vigorous mixing and centrifugation (5 min) to separate phases. The upper phase (solvent phase) was taken and put into a pasteur pipette which contained glass wool with Na2SO4 (to dry the solvent phase). Since the amount of pentane seemed to be insufficient (no solvent reached the GC glass container), the next two extractions were done with 1 ml of pentane each. Afterwards the combined extracts were reduced to approximately 300 µl under a stream of nitrogen.

3 replicates of negative control (reaction batch without enzyme) and enzymatic reaction batch were done.


The pentane extracts were analyzed with gas chromatography- mass spectrometry to identify the enzymatically formed products. An aliquot of each sample (0.5 µl) was injected into "5890 Series II GC" coupled to a "Finnigan Mat 55 S MS".

Preparation of yeast cultures for large scale expression (1l) 1

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the preparation of three 30ml yeast cultures (in selective SC-U 2% glucose medium), based on yeast clones transformed with pTUM104 vectors, each containing one of the three genes CaXMT1, CaMXMT1 and CaDXMT1 for having enough crude extract for further analysis.

Operational sequence:

If possible, a single colony which had grown on selective SC-U 2%glucose agar plates was used for inoculation of the 30ml liquid medium. If the density of the colonies was to high, a small amount (pipett dip) was taken. The generated cell suspensions were incubated at 30°C over night.

Wednesday, September 19th

Miniprep of picked colonies (P806+ P791)

Investigator: Georg

  • Miniprep was performed according to quiaprep Spin Miniprep kit protocoll

Analytical digestion of (P806+ P791)

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
0,75 XbaI
0,75 µl PstI-HF (NEB)
6µl NEB-4 buffer
0,6 µl 100 x BSA (NEB)
44,4 µl dd H20
=52,5 µl TOTAL
  • to 2,5 ml of DNA 17,5 µl reaction batch were added
  • Digestion took place at 37°C for 1 h

20120919 TEF2-pYESII+ luciferase (is a failure).png

  • ligation of P806 (digested pTUM102 ) and P791 (Renilla luciferase) failed

Preparative digestion of TEF1-T in psb1c3 and ADH1-T in psb1c3 with EcorI and SpeI

Investigator: Georg

  • Reaction batch for digestion:
volume reagent
2 µl EcorI-HF (NEB)
2 µl SpeI-HF (Neb)
8 µl NEB-4 buffer
0.8 µl 100 x BSA (NEB)
29,2 µl dd H20
=40 µl TOTAL
  • 20 µl reaction batch were added to 20 µl of DNA
  • Digestion then was performed for 3 hours at 37 C

File:20120919 Prep. Dig TEF1-T und Psb1c3 mit EcorI und SpeI.png


Ligation of P806 + P791 and P492 + P791

Investigator: Georg

  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,89 µl P791
0,41 µl (=100 ng) P806
2 10x T4-ligase buffer
6,2 µl dd H20
=20µl TOTAL
  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
1,09 µl P492
7,81 µl (=100 ng) P791
2 10x T4-ligase buffer
4,05 µl dd H20
=20µl TOTAL
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Preparative gelelectrophoresis of P874, P877, P878

Investigator: Georg

Aim of the experiment: Preparative gelelectrophoresis of P874, P877, P878 (2nd time) in order to completely get rid of the backbone contamination.

Procedure:

  • Second preparative gelelectrophoresis of P874, P877, P878 was performed on an 0.5% agarose gel at 70 V for 3 h.
P874 1 kbp ladder P877 P878
Band was cut out Band was cut out Band was cut out

TUM12 20120919 P874,P877, P878.jpg

Agarose gel extraction

Investigator: Katrin

Aim of the experiment: Extraction of DNA from agarose gel

concentrations:

  • 1 (4): 5,3 ng/µl
  • 2 (3): 14,7 ng/µl
  • 2 TEF 2: 14,9 ng/µl

Gel extraction was done using the Qiagen gel extraction kit

Preparing of cultures for toxicity test

Investigators: Andrea, Lara

  • three cultures were prepared (in 200 ml YPD medium): S. cerevisae (lab strain), brewing yeast, supermarket yeast ("wieninger hefe")

Ligation of promotor/LS/terminator constructs with integration vector

Investigators: Katrin, Andrea, Lara

1(4))

Substance Volume
P649 (integration vector; digested with EcoR1+Spe) 0.23 µl
1(4) (LS construct, digested with EcoR1+Spe) 7.77 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl

2(3))

Substance Volume
P649 (integration vector; digested with EcoR1+Spe) 0.7 µl
2(3) (LS construct, digested with EcoR1+Spe) 7.3 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl


2TEF(2))

Substance Volume
P649 (integration vector; digested with EcoR1+Spe) 0.63 µl
2TEF(2) (LS construct, digested with EcoR1+Spe) 7.33 µl
T4 ligase 1 µl
T4 ligase buffer 1 µl
TOTAL =10 µl


Sniffing test of Limonene

Investigator: Lara, Andrea


Aim of the experiment: 8 persons (Lara, Katrin, Georg, Alois, Martin, Volker, Ingmar, Prof. Skerra) described and differed the smell of 6 probes


probes:

  • 1: positive, SC medium + Galactose, PCR1 (Citrus) (Klon 29) with consensus sequence
  • 2: Positive control, 3 µl Limonene in 10 ml SC medium + Galactose
  • 3: negative, SC medium + Uracile + Glucose, not transformed
  • 4: negative, SC medium + Glucose, PCR1 (Citrus) (Klon 29), not induced
  • 5: positive, SC medium + Galactose, PCR2 (Citrus) (P542) without consensus sequence
  • 6: positive, SC medium + Galactose + GPP (10mM, 25µl in 50ml), PCR1 (Citrus) (Klon 29) with consensus sequence


results, smells like ... :

  • 1) yeast, alcoholic, fruity, sweet, medium, wine
  • 2) wood, resin, condiment, limonene
  • 3) fruity, wine, carbonic acid, malic acid, similar to 1
  • 4) fruity, wine, malic acid, similar to 3
  • 5) yeast, vinegar
  • 6) very fruity, wine, a bit resin


conclusion:

  • positive and negative probes could not differed clearly
  • positive control was identified often
  • addition of GPP led to a stronger limonene recognition than the other positive probes

cell solution were centrifuged and the pellet were stored at -20°C

Picking of 36 clones

Investigators: Martin, Alois

Aim: To study integration efficiency, we kept track of 36 single clones, which were studied over a time course of 48, respectively 96 hours.

Procedure: Two 96s wells were covered in aluminum foil and autoclaved. 24 (respectively 12) chambers of one well were each filled with 150µl YPD medium and inoculated with a single clone that was picked from the transformation plate. After 12h the cells were passaged into a new well with new medium.

Dialysis against 20 mM MES, pH 6.0 (buffer 1) for cation exchange chromatography

Investigators: Martin, Alois

Aim: Purification of thaumatin (standard, lysate, supernatant)

  • pI of thaumatin: 8.3.
  • Buffer 2: 20 mM MES, 0.5 M NaCl, pH 6.0.


Preparation of yeast cultures for large scale expression (1l) 2

Investigator: Saskia, Daniela

Aim of the experiment:

Aim of the experiment was the preparation of three 80 ml yeast cultures (in selective SC-U 2% glucose medium), based on the 30 ml yeast cultures from 18.09., each containing one of the three genes CaXMT1, CaMXMT1 and CaDXMT1 for having enough crude extract for further analysis.

Operational sequence:

The OD600nm was measured. All had an OD600nm of about 8/ml. Therefore 4 ml of each culture was transferred into 80 ml Sc-Uracil + glucose medium to reach an OD600nm of 0.4. The generated cell suspensions were incubated at 30°C over night.

Thursday, September 20th

Investigator: Kathrin Fischer

Transformation of competent invitrogen YEAST cells with pTUM101-Luciferase, pTUM102-Luciferase, pTUM101-Limonensynth., pTUM102-Limonensynth., pTUM103-Limonensynth.

  • Transformation was done according to the manual of the S.c. EasyComp Yeast Transformation Kit from invitrogen

Ligation of P885 and P886

Investigator: Georg


  • Reaction batch for Ligation:
volume reagent
1 µl T4-Ligase (1u/µl)
7 µl P886
3,4 µl (=100 ng) P885
2 10x T4-ligase buffer
6,6 µl dd H20
=20µl TOTAL


  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Transformation of E.coli XL1-blue competent cells with ligation of P885 + P886

Investigator: Georg

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.
  • 30 min incubation on ice
  • 5 min. heat shock at 37°C
  • Adding of 1ml LB-medium to each tube.
  • Incubation for 45min at 37°C in the 180rpm cell-culture shaker.
  • 100µl of those cell suspension were plated on chloramphenicole plates.
  • The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new CAM plates.

Cycled ligation of P750+P882, P750+P884, P885+P882, P885+P884, P881+P791, P875+P876, P873+P876

Investigator: Jeff

Aim of the experiment: Cycled ligation of P750+P882 (cloning Gal4 based expression casette battery into pSB6A0), P750+P884 (cloning LexA based expression casette battery into pSB6A0), P885+P882 (cloning Gal4 based expression casette battery in another pSB1C3 to correct the lost NotI site), P885+P884 (cloning LexA based expression casette battery in another pSB1C3 to correct the lost NotI site), P881+P791 (cloning of Renilla luciferase into pYES2new), P875+P876 (cloning of TEF1-promoter+Renilla luciferase into pYES2new(pGAL-)), P873+P876 (in the front of CYC1 terminator in pSB1C3.

Procedure:

  • Ligation batch for P750+P882 (1:3)
volume reagent
1.31 µl P750 (76.1 ng/µl, 4791 bp)
7.23 µl P882 (52.4 ng/µl, 6091 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
8.46 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P750+P884 (1:3)
volume reagent
1.31 µl P750 (76.1 ng/µl, 4791 bp)
8.76 µl P884 (44.4 ng/µl, 6256 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
6.94 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P885+P882 (1:3)
volume reagent
2.8 µl P885 (29.8 ng/µl, 2047 bp)
14.2 µl P882 (52.4 ng/µl, 6091 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
=20 µl TOTAL
  • Ligation batch for P885+P884 (1:3)
volume reagent
2.38 µl P885 (29.8 ng/µl, 2047 bp)
14.62 µl P884 (44.4 ng/µl, 6256 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
=20 µl TOTAL
  • Ligation batch for P881+P791(1:3)
volume reagent
1.56 µl P881 (63.9 ng/µl, 5789 bp)
1.82 µl P791 (27.1 ng/µl, 956 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
13.62 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P875+P876(1:3)
volume reagent
2.72 µl P875 (36.7 ng/µl, 4844 bp)
2.35 µl P876 (35.7 ng/µl, 1362 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
11.93 µl ddH2O
=20 µl TOTAL
  • Ligation batch for P873+P876(1:3)
volume reagent
12.7 µl P875 (6.9 ng/µl, 2336 bp)
4.3 µl P876 (35.7 ng/µl, 1362 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
=20 µl TOTAL
  • Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batches.
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C

Measurement of absorption spectrum of extracted phycocyanobilin

Investigator: Jeff

Aim of the experiment: Measurement of absorption spectrum of extracted phycocyanobilin.

Procedure:

TUM12 20120920 PCB absorptionspectrum.jpg

Transformation of E. coli XL1-Blue with ligation products P750+P882, P750+P884, P885+P882, P885+P884, P881+P791, P875+P876, P873+P876

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P750+P882, P750+P884, P885+P882, P885+P884, P881+P791, P875+P876, P873+P876.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P750+P882 (AmpR), P750+P884 (AmpR), P885+P882 (CamR), P885+P884 (CamR), P881+P791 (AmpR), P875+P876 (AmpR), P873+P876 (CamR)) and the negative controls were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • The cell suspensions were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellets was resuspended in 100 µl of LB-medium and were plated on antibiotic plates.
  • Incubation at 37 °C overnight.

Sequencing of promotor/limonensynthase/terminator-constructs

Investigators: Andrea, Lara

clone 1(2): TEF2/PCR2/Cyc-T/pSB1C3

clone 2(4): TEF1/PCR2/Cyc-T/pSB1C3

clone 2TEF(1): TEF1/PCR2/TEF1/pSB1C3

Cell lysis for expression comparison test

Investigator: Lara, Andrea

Aim: Cell disruption for harvesting proteins expressed in yeasts (crude protein extract)

Procedure:

  • resuspending cell pellets in defined volume of breaking buffer + PMSF
  • adding glass beads
  • vortex for 30 seconds and incubate on ice for 30 seconds (repetition for 20 times)
  • centrifuge at 4 °C, full speed, 10 min
  • take supernatant and centrifuge at 4 °C, full speed, 10 min again
  • store supernatant at -20°C


1: PCR1 (Clone 29), cons - induced (SC-U + Gal)

3: S. cerevisiae - not transformed, SC + Uracil + Glu

4: PCR1 (Clone 29), cons - not induced (SC-U + Glu)

5: PCR2 (p542), consless - induced (SC-U + Gal)


please apply this order on SDS-gel: 5, 1, 4, 3

Cation exchange chromatography of thaumatin (standard, lysate, supernatant)

Investigator: Volkic, Martinic, Aloisic

  • ÄKTA purifier 3, resource S; superloop: programm: Volker Morath_iGEM.
  • pI of thaumatin: 8.3.
  • Buffer 1: 20 mM MES, pH 6.0.
  • Buffer 2: 20 mM MES, 0.5 M NaCl, pH 6.0.
  • Standard: ca. 8 ml, 1 mg/ml.
  • Lysate: ca. 10 ml.
  • Supernatant: ca. X ml.

"Continuation: Picking of 36 clones"

Investigators: Martin, Alois

Aim: To study integration efficiency, we kept track of 36 single clones, which were studied over a time course of 48, respectively 96 hours.

Procedure: Two 96s wells were covered in aluminum foil and autoclaved. 24 (respectively 12) chambers of one well were each filled with 150µl YPD medium and inoculated with a single clone that was picked from the transformation plate. After 12h the cells (5 µl) were passaged into a new well with new medium (140 µl YPD).

  • Continuation: After further 12h (10:00) the cells (5 µl) were passaged into a new well with new medium (140 µl YPD).

SDS-PAGE of cation exchange chromatography probes of thaumatin (standard, lysate)

Investigator: Aloisic

  • S (= standard): M/S0(without iEX)/S12/S13/S14/S15/S16/S17.

TUM2012 120921 SDS StandardThaunachIEX.jpg

  • The bought thaumatin (MedHerb) is quite clean; the second protein bands in fraction S15, S16, S17 could be thaumatin dimers.
  • L1 (lysate): M/S14/6/7/8/9/10/11/12/13.

TUM2012 120921 SDS Lysat1ThaumatinnachIEX.jpg

  • L2 (lysate): M/S14/14/15/16/17/18/19/20/21.

TUM2012 120921 SDS Lysat2nachIEX.jpg

  • Result: Fractions 14 and 15 show a slight protein band of thaumatin (22.2 kDa). The expression was successful, but the yield was low.

Miniprep of transformation

Investigator: Dennis

Aim: Miniprep of 9 over night cultures with number cassette CaXMT1 (biobrick1),cassette CaMXMT1 (biobrick2), cassette CaDXMT1 (biobrick3). Clones were isolated of over night culture, 5ml LB-medium with CHLP.

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl ddH2O at room temperature, with the columns having been incubated 2 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Miniprep of transformation

Investigator: Dennis

Aim: Miniprep of 3 over night cultures with number B2A + terminator ADH1, B1B + terminator ADH1, B3D + ADH1 terminator. Clones were isolated of over night culture, 5ml LB-medium with CHLP.

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl ddH2O at room temperature, with the columns having been incubated 2 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Preperative digestion

Investigator: Dennis

Aim of the experiment: after the sequences of the constructs were succsesful, we started a preperative digestion of the constructs to ligate them together. All three: cassette CaXMT1 (biobrick1),cassette CaMXMT1 (biobrick2), cassette CaDXMT1 (biobrick3)

Ligation of preparative digestion

Investigator: Dennis

Aim of the experiment: ligation was performed for cassette CaXMT1 (biobrick1)+ cassette CaMXMT1 (biobrick2)+ cassette CaDXMT1 (biobrick3)

Start of the large scale expression (1l) 3

Investigator: Saskia, Daniela

Aim of the experiment:

Aim of the experiment was the expression of the three caffein genes CaDXMT1, CaMXMT1 and CaXMT1 in selective SC-U 2% galactose expression medium), based on the 70 ml yeast cultures from 19.09., each containing one of the three genes CaXMT1, CaMXMT1 and CaDXMT1 for having enough crude extract for further analysis.

Operational sequence:

The OD600nm was measured:

  • CaDXMT1: 7
  • CaMXMT1: 6.52
  • CaXMT1: 7.1

therefore 57 ml, 61 ml and 56 ml yeast culture were centrifuged, the supernatant discarded, the pellet resuspended and transferred into selective SC-U 2% galactose expression medium and incubated at 30°C for 16 h.

Friday, September 21st

Transformation of E. coli XL1-Blue with ligation products P885+P882, P885+P884, P881+P791, P875+P876, P873+P876

Investigator: Simon

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P885+P882, P885+P884, P881+P791, P875+P876, P873+P876.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P885+P882 (CamR), P885+P884 (CamR), P881+P791 (AmpR), P875+P876 (AmpR), P873+P876 (CamR)) and the negative controls were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of the cell suspensions were plated on suitable antibiotic plates.
  • The cell suspensions were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellets was resuspended in 100 µl of LB-medium and were plated on antibiotic plates.
  • Incubation at 37 °C overnight.

Preparative digestion and gelelectrophoresis of P676

Investigator: Ingmar, Simon

Aim of the experiment: Preparative digestion and gelelectrophoresis of P676 with EcoRI-HF and SpeI-HF.

Procedure:

TUM12 20120921 prepgel Ingmar.jpg

Cycled ligation of P898+P882, P898+P884

Investigator:

Aim of the experiment: Cycled ligation of P898+P882, P898+P884 in order to clone the expression casette battery in pSB6A0, an yeast/bacterial hybrid plasmid.

Procedure:


Analytic digestion of CaXMT1 and CaMXMT1

Investigator: Dennis

Aim of the experiment: the constructs CaXMT1 and CaMXMT1 together will be cut out, by XbaI and SpeI, and analysed

Procedure:

  • Reaction batch:
volume reagent
5 µl probes
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl SpeI HF (20 U/µl)
10,5 µl ddH2O
=20 µl TOTAL

Analytic gel electrophoresis

experimenter: Dennis

  • 1 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.
  • analytic gelelectrophoresis was perforemd at 90 V for 1 h.
1 kbp DNA ladder pSB1C3 CaXMT1+CaMXMT1 ( miniprep1) pSB1C3 CaXMT1+CaMXMT1 ( miniprep2) pSB1C3 CaXMT1+CaMXMT1 ( miniprep5) pSB1C3 CaXMT1+CaMXMT1 ( miniprep6)
1 kbp DNA ladder

21092012 analgel cassette1+cassette2 dennis.png

Transformation of E. coli

Investigator: Katrin, Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with the sequenced constructs CaXMT1, CaMXMT1, CaDXMT1

Procedure:

  • 20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on chloramphenicol plates.
  • The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.
  • Incubation at 37 °C overnight.

Ligation of the three cassettes

Investigator: Dennis

Aim of the experiment: ligation was performed for cassette CaXMT1 (biobrick1)+ cassette CaMXMT1 (biobrick2)+ cassette CaDXMT1 (biobrick3)

SDS-PAGE of cation exchange chromatography of thaumatin of lysate (2nd run) and supernatant

Experimenter: Marin, Alois

  • L3: M/S14/X/12/13/14/15/16/17.

TUM2012 120921 LysatLauf2nachIEX.jpg

  • Result: Fraction 14 shows again a slight protein band of thaumatin (22.2 kDa). The expression was successful, but the yield was low.

SDS-PAGE + silver staining of cation exchange chromatography of supernatant

Experimenter: Marko Marin, Alois

  • U1: M/S14/X/4/5/6/7/8/9/10.
  • U2: M/S14/X/11/12/13/14/15/16/17.


Results: 120921 silbergel thaumatin TUM12.jpg

If there is any thaumatin in the supernatant, the silver staining may not be sensitive enough.


Large scale expression (1l) 4

Investigator: Saskia, Kathrin

Aim of the experiment:

Aim of the experiment was the expression of the three caffein genes CaDXMT1, CaMXMT1 and CaXMT1 in selective SC-U 2% galactose expression medium for having enough crude extract for further analysis.

Operational sequence:

The cells didn't grow, because the OD600nm was still 0.4 as we started the day before. Thus we centrifuged the cells, discarded the supernatant and resuspended the cells in selective SC-U 2% glucose medium and grew the cells again in 200 ml of SC-U 2% glucose medium to get enough cells for repetition of the expression. The cells were incubated at 30°C over night.

Toxicity Assay: effect of caffeine, thaumatin and limonene on yeast growth

Investigator: Mary

Aim of the experiment: To check whether caffeine, thaumatin and limonene have a toxic effect on different yeast strains.

One over-night culture of INVSc were inoculated and the OD(600) measured at the next day.

The OD(600) was adjusted to 0,5 in different media and the growth rate were measured after about 2-3 hours.

  • Caffeine: concentrations of 100mM to 1µM were used, but caffeine did not resolve completely, so the experiment did not show any effect and was repeated the next day.
  • Thaumatin: a concentration of 1mg/ml was used, by adding 10mg of thaumatin to 10ml YPD medium. The growth rate was measured four times.

Results:

Evaluation of the Toxicity Assay for Thaumatin.
  • Limonene: following concentrations were used: 100mM, 10mM, 1mM, 100µM, 10µM, 1µM and the growth rate was measured five times.

Results:

Evaluation of the Toxicity Assay for Limonene.

As the negative control (without any substance in the medium) the INVSc strain of the growth experiment was used.


Growth experiment of three different yeast strains in different conditions

Investigator: Mary

Aim of the experiment: We want to establish the effect of gyle with and without hop on the growth rate of the INVSc strain, which was used in our laboratory research compared to two different strains.

Three over-night cultures were inoculated: one clone of INVSc was picked, a crumb of a yeast typically for brewing and a crumb of a yeast which can be purchased in the supermarket were added to the YPD medium.

The growth rate was measured four times (every 2-3h)

Results:

Evaluation of measured OD600 of several yeast strains under different conditions.


Saturday, September 22nd

Inoculation of yeast overnight culture with yeast transformated with pTUM101-P791 and pTUM103-P791

Aim of the project: Make an overnight culture of yeast transformants for luciferase assay

  • one colony was transferred into 30 ml sterile filtrated USC-medium (Uracil missing) and incubated at 30 min over night.

Transformation of E. coli XL1-Blue with ligation products P898+P882, P898+P884

Investigator: Ingmar

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P898+P882, P898+P884.

Procedure:

  • CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.
  • 5 µl of the ligation products (P898+P882 (AmpR), P898+P884 (AmpR)) and the negative controls were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of the cell suspensions were plated on suitable antibiotic plates.
  • The cell suspensions were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.
  • The pellets was resuspended in 100 µl of LB-medium and were plated on antibiotic plates.
  • Incubation at 37 °C overnight.

Protein purification

Investigators: Volker, Lara


Aim: Get purified limonene synthase for enzyme assays.


Dialysed and steril-filtered protein samples from large scale cell lysis were applied to a streptavidin solid support.


Miniprep of integration vector constructs

Investigators: Lara

Aim: Get plasmid DNA for integration of limonene synthase gene into yeast.

1(4): TEF2-P/LS consless/CYC-T:

  • 80 ng/µl

2(3): TEF1-P/LS consless/CYC-T:

  • 1: 155 ng/µl
  • 2: 750 ng/µl
  • 3: 175 ng/µl

2TEF2 TEF1-P/LS consless/TEF1-T

  • 1: 205 ng/µl
  • 2: 192 ng/µl
  • 3: 208 ng/µl

Analytical restriction digest (or/and) preparative gel electrophoresis still have to be done! Miniprep products are stored in a 50 ml falcon in the lowest drawer of -20°C. Label: Integrationsvektor, Limonen, 22.9.

Preparation of cultures for expression

Investigators: Lara

Aim: Making of reparatory cultures in glucose medium for transfer into induction medium the next day.


Picking of clones:

  • Clone carrying PCR1-LS: SC-U + Glu (50 ml)
  • Clone carrying PCR2-LS: SC-U + Glu (50 ml)
  • S. cerevisiae (not transformed): SC-U + Glu + uracil (50 ml)


Preparation of medium for induction:

1. SC-U + Gal: PCR1

2. SC-U + Gal: PCR2

3. SC-U + Gal: PCR1 + GPP

4. SC-U + Gal: PCR2 + GPP

5. SC-U + Glu: PCR1

6. SC + Glu + uracil: S. cerevisiae (not transformed)

7. SC + Glu + uracil + limonene: S. cerevisiae (not transformed)

Plating of 31 clones originally transfected with integ-vec_mOrange (see preparative experiment) + negative control (not transfected)

Investigator: Martin the Weird

Procedure: The last culture of the preparative experiment was used to inoculate an overnight culture. The OD 600 of all candidates was measured.

Clone OD 600 Clone OD 600 Clone OD 600
1 1.73 13 1.05 25 2.02
2 1.88 14 0.79 26 1.98
3 1.96 15 1.98 27 fail
4 fail 16 1.96 28 fail
5 2.06 17 1.99 29 1.96
6 2.02 18 1.97 30 2.00
7 2.01 19 1.99 31 1.94
8 1.64 20 1.98 32 1.96
9 1.89 21 fail 33 1.95
10 1.99 22 1.87 34 2.02
11 1.97 23 1.96 35 1.97
12 fail 24 1.96 36 2.03


We had 5 negatives, probably due to mistakes in pipeting. The rest of the cultures were diluted to OD 0.4 and 100 ml of it were used to plate on selective (meaning G418+) petri dishes.

Start of the large scale expression (1.5 l) 5

Investigator: Saskia

Aim of the experiment:

Aim of the experiment was the expression of the three caffein genes CaDXMT1, CaMXMT1 and CaXMT1 in selective SC-U 2% galactose expression medium), based on the 200 ml yeast cultures from 21.09., each containing one of the three genes CaXMT1, CaMXMT1 and CaDXMT1 for having enough crude extract for further analysis.

Operational sequence:

3x 1.5 l selective SC-U 2% medium were produced and 167 ml 20% galactose were added each to gain 2% galactose.

The OD600nm of the over night cultures grown in selective SC-U 2% glucose medium was measured:

  • CaDXMT1: 6
  • CaMXMT1: 6.5
  • CaXMT1: 7

therefore 100 ml, 92 ml and 86 ml yeast culture were centrifuged, the supernatant discarded, the pellet resuspended in selective SC-U 2% galactose expression medium and transferred into 1.67 l selective SC-U 2% galactose expression medium and incubated at 30°C for 16 h.

Preparation of 0.1 M sodium phosphate (pH 7.4) and breaking buffer with and without PMSF

Investigator: Saskia

0.1 M sodium phosphate (pH 7.4): 1 liter

  • solution of 15.601 g NaH2PO4x2H20 in 100 ml ddH2O: 1 M NaH2PO4x2H20
  • solution of 17.799 g Na2HPO4x2H20 in 100 ml ddH2O: 1 M Na2HPO4x2H20
  • 22.6 ml 1 M NaH2PO4x2H20 + 77.4 ml 1 M Na2HPO4x2H20. Before bringing up the volume to 1 liter controll of pH (7.4) and if needed correction of pH.


Breaking buffer: 1 liter

  • 50 mM sodiumphosphate (pH 7.4): 500ml of 0.1 M sodiumphosphate
  • 1 mM EDTA: 2 ml of 500 mM EDTA
  • 5 % glycerol: 50 ml of 100% glycerol
  • 348 ml ddH2O

when preparing breaking buffer with PMSF 100 ml of 10 mM PMSF solved in isopropanol were added to get 1 mM PMSF

  • (10 mM PMSF: 0.1741 g PMSF + 100 ml isopropanol)


Repetition of Toxicity Assay: effect of caffeine on yeast growth

Investigator: Mary

Aim of the experiment: To check whether caffeinehas a toxic effect on different yeast strains.

One over-night culture of INVSc were inoculated and the OD(600) measured at the next day.

The OD(600) was adjusted to 0,5 in different media and the growth rate were measured after about 2-3 hours.

  • Caffeine: concentrations of 100mM to 1µM were used. To resolve the caffeine completely incubation in ultrasonic bath was needed. Afterwards, caffeine was resolved completely.

As the negative control (without any substance in the medium) the INVSc strain of the growth experiment was used.

Results:

Evaluation of the Toxicity Assay for Caffeine.

Sunday,September 23rd

Yeast expression: Pelletizing 18 h after expression induction and cell lysis

Investigator: Saskia

Aim of the experiment:

Aim of the experiment was to pellet the 1.67 l cell suspension 18 h after expression induction and to wash the pellet with breaking buffer. Then the cells were lysed using glass beads.

Operational sequence:

At first, the OD600 of the suspensions was determined:

  • CaXMT1: 0.424
  • CaMXMT1: 0.384
  • CaDXMT1: 0.516

The cell suspensions were centrifuged at 4000 rpm for 25 minutes at 4°C. Afterwards the supernatant was discarded and the pellet was resuspended in 20 ml breaking buffer without PMSF. The cells were centrifuged again at 4000 rpm for 25 minutes at 4 °C. The supernatant was discarded and the cells were resuspended in 13-14 ml breaking buffer with PMSF for the cell lysis. An equal amount of glass beads solved in breaking buffer were added and the cell supsensions were votexed and stored on ice each for 30 seconds. This two steps were repeated 30 times. Then the suspensions were centrifuged at 4000 rpm for 20 min at 4 °C. The supernatant was stored and the beads were washed again in 5 ml breaking buffer with PMSF and centrifuged at 4000 rpm for 20 min at 4 °C. 1 ml was stored at - 80 °C for enzymatic analysis. And the rest was used for dialysis and purification for detection of all three enzymes via LCMS.

Week 16

Monday, September 24th

Headspace GC-MS of limonene

Investigator: Lara

Aim: Check whether limonene is detectable in the cell culture supernatant. Since extraction is time-consuming, SPME was done.

  • The SPME needle was injected into the headspace. Incubation for 30 min at 45 °C.
  • Injection into the GC (starting temperature: 40 °C)

Miniprep of transformation

Investigator: Dennis

Aim: Miniprep of 8 over night cultures with number all cassette CaXMT1, CaMXMT1, CaDXMT1. Clones were isolated of over night culture, 5ml LB-medium with CHLP.

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl ddH2O at room temperature, with the columns having been incubated 2 minutes at room temperature before the final centrifugation.

Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Analytic digestion of miniprep

Investigator: Dennis

Aim of the experiment: the constructs CaXMT1, CaMXMT1 and CaDXMT1 together will be cut out, by XbaI and SpeI, and analysed

Procedure:

  • Reaction batch:
volume reagent
5 µl probes
2 µl NEBuffer 4 (10x)
0.2 µl BSA (100x)
1 µl XbaI (20 U/µl)
1 µl SpeI HF (20 U/µl)
10,5 µl ddH2O
=20 µl TOTAL

Analytic gel electrophoresis

experimenter: Dennis

  • 1 µl of DNA loading buffer (10x) was added to the digestion mix (pSB1C3 CaXMT1+CaMXMT1+CaDXMT1, clone 1-8) after incubation time.
  • analytic gelelectrophoresis was perforemd at 90 V for 1 h.
1 kbp DNA ladder ( miniprep1) ( miniprep2) ( miniprep3) ( miniprep4) ( miniprep5) ( miniprep6) ( miniprep7) ( miniprep8) 1 kbp DNA ladder

21092012 analgel cassette1+cassette2 cassette3 dennis2.png

High scale yeast expression: Induction

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the induction of the expression of the following three genes: CaXMT1, CMXMT1 and CaDXMT1. Previous attempts to do a high scale expression with these genes had failled, because the transformed yeast cells showed no growth after transferring them into 2% galactose containing induction medium.

Operational sequence:

As previously described, the OD600 of the over night cultures (in SC-U medium with 2% glucose) was determined. 1l of SC-U 2% galactose medium were inoculated with a calculated amount of pelleted over night cultures (to get an OD600 of ca. 0,4). The cultures were incubated at 30°C for 20 hours and then stored in the cooling room (4°C) until cell lysis.

Determined OD600 20h after induction:

  • CaXMT1: 5,5
  • CaMXMT1: 5,0
  • CaDXMT1: 4,9

In vitro reconstruction of the caffeine biosynthesis pathway: Enzyme assay

Investigator: Roman, Saskia

Aim of the experiments:

Aim of the experiment was the proof of enzyme function by reconstruction of the caffeine biosynthesis pathway.

Operational sequence:

The enzyme assay was performed as described in the paper of Hiroshi Sano et al., 2003. 100µl reaction volumes were prepared as follows:

  • 50 mM Tris/HCl (pH 8.0)
  • 500 µM Xanthosine (not used in two negative controlls, see below)
  • 1,5 mM SAM (S- adenosyl methionine)
  • 200 µM MgCl2
  • 200 µg of each used (see below) protein (crude extract)

(each reaction batch was filled up to 100µl with water)

We prepared the following reaction batches (differing enzyme- and substrate-compositions):

Batch Enzyme content
1 200µg of all three enzymes, isolated on 31.08. and 11.09., with xanthosine
2 200µg of all three enzymes, isolated on 31.08. and 11.09., with xanthosine
3 200µg of all three enzymes, isolated on 31.08. and 11.09., without xanthosine
4 no enzymes (water instead), with xanthosine
5 200µg of all three enzymes, isolated on 22.09., with xanthosine
6 200µg of all three enzymes, isolated on 22.09., with xanthosine
7 200µg of all three enzymes, isolated on 22.09., without xanthosine
A 200µg of CaXMT1, isolated on 31.08. and 11.09., with xanthosine
B 200µg of CaXMT1 and CaMXMT1, isolated on 31.08., with xanthosine
C 200µg of CaXMT1, isolated on 22.09., with xanthosine
D 200µg of CaXMT1 and CaMXMT1, isolated on 31.08., with xanthosine
  • Samples 2 and 6 were incubated for 16 hours at 16°C (highest fermenting temperature)
  • All other samples were incubated for 16 hours at 27°C (enzyme optima after Hiroshi Sano et al., 2003)

To end the reaction, the batches were frozen at -80°C until further usage (chloroform extraction).

Tuesday, September 25th

In vitro reconstruction of caffeine biosynthesis pathway: chloroform extraction

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the extraction of potential reaction products, to be able to start a LCMS analysis in order to detect the synthesized caffeine.

Operational sequence:

We added 1 ml of chloroform to the 100µl reaction batches, mixed a few seconds and stored the tubes for about 30 min at room temperature, to get a proper phase- separation. Afterwards, the lower phase (chloroform) was pipetted in tubes (glass tubes would have been better than plastic tubes) (1ml) and incubated for about 60 min at 60°C (=drying) until total chloroform removal.

The tubes were then stored at -80°C over night until further usage (LCMS)

Wednesday, September 26th

In vitro reconstruction of caffeine biosynthesis pathway: LCMS analysis of extracted compounds

Investigator: Roman

Aim of the experiment:

Aim of the experiment was the detection of the chemical compounds, having been extracted of the reaction batch of our enzyme assay. We hoped to detect the metabolits 7- methylxanthine, theobromine (3,7- dimethylxanthine) and caffeine (1,3,7- trimethylxanthine).

Operational sequence:

First of all, the dried extract was solved in 200 µl of 70% methanol, mixed and than transferred into small glass tubes (LCMS tubes) and applied to the LCMS machine.

Results:

There were indeed two signals for theobromine and caffeine, howerver, these signals appeared in all samples, suggesting that it is not specific and belongs to the "background". A reason could be that the applied substrate xanthosine was not totally clean and contained small amounts of caffeine. If the enzymes had worked probably, we would have expected more significant signals. A reason could be that we had stored the enzymes for mor than two weeks at -80°C after the cell lyses and before using them for the enzyme assay. Maybe the experiment should be repeated with fresh isolated enzymes.

Analysis of yeasts' genome integration

Investigators: Martin


Aim: Study of genome integration Procedure: The clones of the experiment before were incubated in an over night culture, diluted to OD600 = 0.4 and put on a plate with G418 again to study the perseverance of antibiotics tolerance

Results: Of an overall number of 36 clones the experiment started with, 5 were already lost after the over night incubation (probably because of pipetting mistakes during the inoculation procedure on the 96-well plate). Of the 31 remaining plates, 21 were empty. The cfu of the positive plates were:

  • 3
  • 8
  • 49
  • 68
  • 282
  • >1000
  • >10 000
  • >10 000

The plan is to PCR at least two of the clones to gain knowledge why there's been such drastic differences in the integration efficiency and endurance.

Week 17

Friday, October 12th

Plating of yeast for future experiments

  • Preparation of working stocks

Untransformed S. cerevisiae INVSc1 from a glycerol stock were thawed on ice and spread on YDP-Plates. Incubation for 2.5 days at 30 °C.

Plate Description
1 streaking of a small amout to obtain single colonies (inoculation loop)
2 20 µl spread on YPD-plate
3 50 µl spread on YPD-plate
4 100 µl spread on YPD-plate
  • Checking of phenotype of glycerol stock

Untransformed S. cerevisiae INVSc1 from a glycerol stock were thawed on ice and spread on SC-Plates. Incubation for 2.5 days at 30 °C.

Plate Description
5 streaking of a small amout to obtain single colonies (inoculation loop)
6 100 µl spread on SC-plate
  • Checking of phenotype of glyerol stock and of SC-U selective plates

Untransformed S. cerevisiae INVSc1 from a glycerol stock were thawed on ice and spread on SC-U-plates. Incubation for 2.5 days at 30 °C.

Plate Description
7 streaking of a small amout to obtain single colonies (inoculation loop)
8 100 µl spread on SC-plate
  • Streaking of one colony of S. cerevisiae INVSc1 transformed with pTUM100-KlADH4-eGFP

One colony of S. cerevisiae INVSc1 transformed with pTUM100-KlADH4-eGFP was picked from plate "SH 5.5, Klon 4, date 24.06.2012", resuspended in 200 µl of SC-U liquid Medium and spread on SC-U-plates. Incubation for 2.5 days at 30 °C. The aim of this experiment is to obtain a sufficient ammount of monoclonal yeast cells carrying the plasmid for future experiments.

Plate Description
9 streaking of a small amout to obtain single colonies (inoculation loop)
10 50 µl spread on SC-plate
11 150 µl spread on SC-plate

Week 18

Monday, October 15th

Checking of plates from Friday, October 12th

Plate Description Result
1 "empty" S. cerevisiae INVSc1 (inoculation loop), YPD-Agar single colonies of about 1-2 mm diameter
2 "empty" S. cerevisiae INVSc1 (20 µl), YPD-Agar thin lawn, plate discarded
3 "empty" S. cerevisiae INVSc1 (50 µl), YPD-Agar lawn, plate discarded
4 "empty" S. cerevisiae INVSc1 (100 µl), YPD-Agar thick lawn, plate discarded
5 "empty" S. cerevisiae INVSc1 (inoculation loop), SC-Agar single colonies of about 1-2 mm diameter, phenotype ok, plate discarded
6 "empty" S. cerevisiae INVSc1 (100 µl), SC-Agar thick lawn, phenotype ok, plate discarded
7 "empty" S. cerevisiae INVSc1 (inoculation loop), SC-U-Agar small single colonies!, phenotype not ok!, contradiction to result of plate 8!
8 "empty" S. cerevisiae INVSc1 (100 µl), SC-U-Agar no growth, phenotype ok, contradiction to result of plate 7!
9 S. cerevisiae INVSc1, pTUM100-KlADH4-eGFP, from plate SH 5.5 (inoculation loop), SC-U-Agar single colonies of about 1-2 mm diameter
10 S. cerevisiae INVSc1, pTUM100-KlADH4-eGFP, from plate SH 5.5 (50 µl), SC-U-Agar lawn
11 S. cerevisiae INVSc1, pTUM100-KlADH4-eGFP, from plate SH 5.5 (150 µl), SC-U-Agar lawn

The results from plate 7 & 8 contradict each other. Why do untransformed yeast cells grow on plate 7 but not on plate 9? Possible explanation: Plates bad.

Analytical digest with XbaI, SpeI, EcoRI and PstI

Investigator: Daniela

Aim of the experiment: Test whether the enzymes are functional.

volume reagent
1.5 µl P718
0.25 µl EcoRI / PstI
2 µl NEB4 (10x)
16.75 µl ddH2O
volume reagent
1.5 µl P718
0.25 µl SpeI / XbaI
2 µl NEB4 (10x)
0.2 µl BSA (100x)
16.55 µl ddH2O
volume reagent
1.5 µl P718
0.25 µl EcoRI
0.25 µl SpeI
2 µl NEB4 (10x)
0.2 µl BSA (100x)
15.8 µl ddH2O
volume reagent
1.5 µl P718
0.25 µl XbaI
0.25 µl PstI
2 µl NEB4 (10x)
0.2 µl BSA (100x)
15.8 µl ddH2O
volume reagent
1.5 µl P718
0.25 µl EcoRI
0.25 µl PstI
2 µl NEB4 (10x)
16 µl ddH2O


TUM12 20121015 test restriction enzymes.jpg

EcoRI was used from fermentas. Enzymes of fermentas seem not be compatible with NEB4 buffer. PstI did not work proberly. SpeI was frozen in the tube.


Quick Change mutagenesis to remove AgeI in the RFP-Generator (RFC25-compatible)

Investigator: Mary

Aim of the experiment: Generation of an RFC 25 compatible version of the RFP-Generator (pSB1C3).

PCR
Reaction batch 1

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P899 template
0.5 µl 1:10 dilution of O102 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume reagent
2.5 µl 10x Pfu Ultra II buffer
4 µl Plasmid P899 template
0.5 µl 1:10 dilution of O103 (10 pmol/µL)
16.5 µl ddH2O
0.5 µl dNTP mix
0.5 µl Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment Cycles Temperature Time
1 1 95 °C 30 sec
2 10 95°C 30 sec
55°C 1 min
67°C 4 min
  • Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
  • Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

  • melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
  • addition of 1 µl of the PCR product
  • incubation for 30 min on ice
  • heat shock for 5 min at 37 °C
  • transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
  • plate 100 µl on an Amp-LB-plate
  • sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Chloramphenicol-LB-plate


Preparative digestion and gelelectrophoresis of pTUM100 and expression cassette of the three caffeine enzymes in pSB1C3

Investigator: Saskia, Daniela

Aim of the experiment: Cloning of the expression cassette containing CaXMT1, CaMXMT1 and CaDXMT1 into pTUM100

Procedure:

  • preparative digestion with XbaI+PstI-HF:
volume reagent
20 µl pTUM100 or expression cassette
5 µl NEBuffer 4 (10x)
0.5 µl BSA (100x)
1 µl XbaI (20 U/µl) (NEB)
1 µl PstI-HF (20 U/µl) (NEB)
23 µl ddH2O
50 µl TOTAL
  • preparative digestion reaction mix was incubated at 37 °C for 1.5 h.
  • 5 µl of DNA loading buffer (10x) was added to the 50 µl of reaction mix after digestion and loaded in the gel pockets.
  • preparative gelelectrophoresis was performed at 70 V for 90 min on an 1% LMP-agarose gel.
1 kbp DNA ladder pTUM100 expression cassette
cut bond: 5000 bp cut bond: 6000 bp

TUM12 20121015 caffeine expressioncassette pTUM100.jpg

  • gel extraction
  • concentration:
    • pTUM100: 17.4 ng/µl
    • expression cassette: 28.2 ng/µl


Ligation of pTUM100 and caffeine expression cassette

Investigator: Saskia

Aim of the experiment: Cloning of the expression cassette containing CaXMT1, CaMXMT1 and CaDXMT1 into pTUM100

Procedure:

  • Ligation (1:2)
volume reagent
2.88 µl pTUM100 (17.4 ng/µl, 5000 bp)
4.42 µl expression cassette (28.2 ng/µl, 6000 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
9.7 µl ddH2O
=20 µl TOTAL


  • Ligation (1:1)
volume reagent
2.89 µl pTUM100 (17.4 ng/µl, 5000 bp)
2.21 µl expression cassette (28.2 ng/µl, 6000 bp)
2 µl T4 ligase buffer (10x)
1 µl T4 ligase (1 U/µl)
11.9 µl ddH2O
=20 µl TOTAL
  • Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batches.
  • Cycled ligation has been performed after following protocol in a thermocycler:
100 cycles 12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
12 °C 60 s
22 °C 60 s
Hold 16 °C infinite

Lid temperature = 37 °C


Transformation of pTUM100 into E. coli

Investigator: Saskia

Aim of the experiment:There is no more pTUM100 left.

Procedure:

  • 1µl of the miniprep product was added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.
  • 30 min incubation on ice.
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube.
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on ampicilin plates.
  • centrifugation at 14000 rpm, discard supernatant, resuspend in little LB medium, plate on ampicilin plate
  • incubation over night (37°C)

Tuesday, October 16th

Transformation of Integration vectors containing Thaumatin and Limonene synthase into E.coli

Investigator: Katrin

Aim of the experiment: Getting enough DNA for preparative gel electrophoresis followed by gel extraction an transformation in yeast (genome integration)

Procedure: the following constructs were transformed:

Thaumatin: Integ_Tef1P-Thaumatin-Tef1T

Limonene: Integ_TEF1P-LSconsless-CYC-T and Integ_TEF1P-LS consless-TEF1T


  • 1 µl of the miniprep product was added to 100 µl of CaCl2 competent E.coli XL1-Blue cells on ice
  • 30 min incubation on ice
  • 5 min heat shock at 37 °C
  • Adding of 1 ml LB-medium to each tube
  • Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.
  • 100 µl of those cell suspension were plated on ampicilin plates.
  • centrifugation at 14000 rpm, discard supernatant, resuspend in little LB medium, plate on ampicilin plate
  • incubation over night (37°C)


Wednesday, October 17th

Picking of clones of transformed E.coli clones containing integration vector + Thaumatin or Limonene synthase

Investigator: Katrin

Aim of the experiment: Getting enough DNA for preparative gel electrophoresis followed by gel extraction an transformation in yeast (genome integration)

Procedure: From each 100 µl plate, 7 clones were picked for a mini prep


Miniprep of E.coli XL1-Blue with pTUM100

Investigator: Daniela

Aim of the experiment: Plasmid purification

Operation Sequence:

  • A miniprep of 4 clones E.coli XL1-Blue with pTUM100U was done using a Quiagen kit.


Concentration was measured using Nano Drop:

  • clone 1: 111.7 ng/µl
  • clone 2: 90.4 ng/µl
  • clone 3: 120.8 ng/µl
  • clone 4: 89.9. ng/µl


Preparative restriction digest of P548 (PCR58 (consless) in pYES) and P899 (pSB1C3)

Investigator: Andrea

Aim: Prepare backbone of pSB1C3 and PCR 58 (LS without consensus sequence).

volume reagent
20  µl Plasmid (P548 or P899)
4  µl Buffer NEB4 (10x)
0.48 µl BSA
1  µl XbaI (10 U/µl)
1  µl AgeI (10 U/µl)
13.6 µl ddH2O
=40.5 µl TOTAL
  • plasmids were digested at 37 °C for 2.5 hours.

Gelelectrophoresis

Preculture of S. cerevisiae transformed with pTUM100-KlADH4-eGFP

A large amount of cell material from plate 11 (see october 15th, = S. cerevisiae INVSc1 transformed with pTUM100-KlADH4-eGFP, monoclonal culture on plate) was used to inoculate 3 baffled 250 ml flasks containing 50 mL SC-U Medium (carbon source: 3 % glycerol) each. These pre-cultures were incubated at 30 °C, 180 rpm

Simple induction experiment in SC-U (C-source: 3 % Glycerol)

6 culture tubes (13 ml) were used in this experiment:

  • 3 containing 2 ml SC-U Medium (C-source: 3 % Glycerol), 2 % EtOH: inducing conditions
  • 3 containing 2 ml SC-U Medium (C-source: 3 % Glycerol), 0 % EtOH: uninducing conditions

cell material from plate 11 (see october 15th, S. cerevisiae INVSc1 transformed with pTUM100-KlADH4-eGFP, monoclonal culture on plate) was used to inoculate the tubes. The tubes were covered in aluminum foil (to avoid bleaching of expressed eGFP) and incubated at 30°C, 180 rpm.