From 2012.igem.org

Revision as of 09:23, 10 September 2012 by Nadine1990 (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

1 kbp GeneRuler:

100 bp GeneRuler:

PageRuler Plus:

Labjournal

Week 1

Vector Design (4 Experiments):

Exchange of Multiple Cloning Site of pYES2

Limonene (2 Experiments):

Transformation with limonene plasmids from Prof. Schwab

Show Details ...

Wednesday, June 13th

Exchange of the Multiple Cloning Site of pYES2

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pYES2

Hybridisation of the primers O1 with O2 and O3 with O4

Primer preparation:

centrifugation
dilution in the denoted quantity in bidest. water (concentration = 100 pmol/µl)
centrifugation

Hybridisation:

volume	reagent
34 µl	ddH2O
5 µl	PNK-buffer
2.5 µl	Primer O1
2.5 µl	Primer O2
1 µl	PNK (10mM)

volume	reagent
34 µl	ddH2O
5 µl	PNK-buffer
2.5 µl	Primer O3
2.5 µl	Primer O4
1 µl	PNK (10mM)

30 min 37 °C
10 min 80 °C
put the Thermo Block with the mixture in a styrofoam box and let it cool down over night

Thursday, June 14th

Exchange of the Multiple Cloning Site of pYES2

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pYES2

Digestion of pYES2 with HindIII and XbaI

volume	reagent
12 µl	Miniprep (pYES2 SH 1.7.3 with a concentration of 87.8 ng/µl)
5 µl	NEB2
5 µl	10x BSA
2 µl	XbaI (10 U/µl)
2 µl	HinIII (10U/µl)
24 µl	ddH2O

Incubation: 37 °C, 1.75 h

DNA preparative gel electrophoresis

gel: 1% with LMP-agarose
band 1: 10 µl DNA ladder (1kb)
band 2: 50 µl probe + 5 µl loading dye
70 V, 90 min

Gelextration

cut the bands (5.7-5.8 kb) and split it in two eppis
- m1=165.3 mg
- m2=211.1 mg
QIAquick Gel Extractrion Kit
- eppi1: 495.9 µl QG-buffer
- eppi2: 633.3 µl QG-buffer
- step 6 was left out
- step 9: 30µl buffer, 4 min incubation

the product was named P5

Transformation of plasmids from Prof. Schwab in E.coli XL-1 Blue

Investigator: Lara, Andrea

Aim of the experiment: Preparation of the plasmids for transformation

Overnight cultures of cells with limonenesynthase-plasmid from Prof. Schwab

resuspend 50 µl / 200 µl of competent cells with 50 ml LB medium
add 0,1 ml Ampicillin (100 µg/ml) and 0,28 ml Chloramphenicol (170 µ/ml) for strain 108
add 0,07 ml Kanamycin (50 µg/ml) and 0,28 ml Chloramphenicol (170 µ/ml) for strain 106
incubate at 37 °C

Friday, June 15th

Exchange of the Multiple Cloning Site of pYES2

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pYES2

Analytical DNA gel electrophoresis

gel: 1.2 %
band 1: 10 µl DNA ladder (1kb)
band 2: 3 µl pYES2 digested + 7 µl TAE-buffer + 1 µl loading dye
band 3: 3 µl O5 + 7 µl TAE-buffer + 1 µl loading dye
band 4: 3 µl O6 + 7 µl TAE-buffer + 1 µl loading dye
band 5: 10 µl DNA ladder (100 bp)

Ligation of Plasmid P5 (pYES2 digested) with the hybridized primers O5 and O6

volume	reagent
4 µl	pYES2 digested (P5)
1 µl	O5
1 µl	O6
2 µl	T4-ligase buffer (10x)
0,5 µl	T4 DNA-ligase
11.5 µl	ddH2O

Negative control

volume	reagent
4 µl	pYES2 digested (P5)
2 µl	T4-ligase buffer (10x)
0,5 µl	T4 DNA-ligase
13.5 µl	ddH2O

water bath 16 °C
after 3 h a probe for the transformation was taken
the rest was ligated over the weekend

Transformation of E. coli with ligated products (P6)

competent cells: SHXL1 Blue (by Simon)
Transformation with ligation product (P6) and negative control

results:

P6 (100 µl): 1 clone
P6 (concentrated): 30 clones
negative control (100 µl): 0 clones
negative control (concentrated): 6 clones

Transformation of plasmids from Prof. Schwab into E.coli XL-1 Blue

Investigator: Andrea

Aim of the experiment: Preparation of the plasmids for transformation

Determination of the concentration with Nano Drop

Sample	concentration [ng/µl]
P3	1353
P4	no result

the strain 106 culture was not grown satisfying and were incubated for 2 more days

Miniprep of pGex-4T-1 of strain 108 from Prof. Schwab

see QIAprep Spin Miniprep Kit
stored as P3 (-20 °C)

Sunday, June 17th

Exchange of the Multiple Cloning Site of pYES2

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pYES2

Picking clones for Miniprep

10 clones of transformed E.coli with P6 were picked
medium: 5ml LB with Amp

Week 2

Vector Design (4 Experiments):

Exchange of Multiple Cloning Site of pYES2
Quick Change mutagenisis of pYES2 for RFC25 compatibility

Limonene (3 Experiments):

Transformation with limonene BioBricks

Coumaryl (2 Experiments):

Amplification of plasmids containing the genes for the enzymes PAL, 4Cl and CHS

Light Switchable Promoter (1 Experiment):

Transformation with heme oxygenase and LexA BioBricks to them RFC25 compatible later on

Show Details ...

Monday, June 18th

Exchange of the Multiple Cloning Site of pYES2

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pYES2

Miniprep of transformed E.coli with P6

QIAprepS Spin Miniprep Kit
step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)
the 10 Minipreps were named: P7 - P16

Determination of the concentration with Nano Drop

Sample	concentration [ng/µl]	260/280
P7	157.6	2.32
P8	207.3	1.63
P9	171.2	2.02
P10	183.1	1.57
P11	160.4	2.2
P12	179.9	1.75
P13	179.2	2.07
P14	188.3	1.6
P15	166.7	2.05
P16	174.6	2.08

Controll digestion with HindIII XbaI and NgoMIV

Samples P7-P16: 2.5 µl
Negative controll pYES SH 1.7.3: 2.5 µl

Master Mix HindIII and XbaI: 17,5 µl for a 20 µl preparation

volume	reagent
3 µl	HindIII
3 µl	XbaI
24 µl	NEB2
24 µl	10x BSA
156 µl	ddH2O

Master Mix NgoMIV: 17,5 µl for a 20 µl preparation

volume	reagent
6 µl	NgoMIV
24 µl	NEB4
180 µl	ddH2O

Incubation: 37 °C, 1.5 h

Analytical gel electrophoresis of P7-P16

gel: 1.5 %

gel 1:

band 1: 10 µl DNA ladder (1 kb)
band 2: 3 µl pYES2 SH 1.7.3 digested with HindIII and XbaI + 7 µl TAE buffer + 1 µl loading dye
band 3 - 12: 3 µl P7-P16 digested with HindIII and XbaI + 7 µl TAE buffer + 1 µl loading dye

gel 2:

band 1: 10 µl DNA ladder (1 kb)
band 2: 3 µl pYES2 SH 1.7.3 digested with NgoMIV + 7 µl TAE buffer + 1 µl loading dye
band 3 - 12: 3 µl P7-P16 digested with NgoMIV + 7 µl TAE buffer + 1 µl loading dye

Tuesday, June 19th

Transformation of BBa_I742111 (Limonenesynthase) into E.coli XL-1 Blue

Investigator: Andrea

Aim of the experiment: Transformation

for each Biobrick 100 µl cells were used and pooled together with 2 µl of plasmid DNA

Incubation on ice for 30 min

5 min heat shock at 37 °C

cells were prefilled with 1 ml of LB-medium and incubated in a cell-culture shaker at 37 °C for 45 min

100 µl of these cell suspension were plated on antibiotic selection plates (Ampicillin)

cell suspension was centrifuged at 13000 rpm for 60 s for resuspending the pellet with 100 µl LB and plating also

incubation at 37 °C overnight

Wednesday, June 20th

Exchange of the Multiple Cloning Site of pYES2

Investigator: Saskia, Daniela

Aim of the experiment: Exchange of the Multiple Cloning Site of pYES2

Sequencing of P13 and P14: pYES2 with new MCS sequencing primer:

1.6 µM forward primer O9
DNA P13 and P14

The Multiple Cloning Site was exchanged successfully!!!

Transformation of BBa_I742111 (Limonenesynthase) into E.coli XL-1 Blue

Investigator: Daniela

Aim of the experiment: Transformation

Picking of Clones

6 clones were picked
Incubation at 37 °C in LB + Amp

Thursday, June 21st

Transformation of BBa_I742111 and plasmids from Prof. Schwab into E.coli XL-1 Blue

Investigator: Lara, Andrea

Aim of the experiment: Controll of Transformation

Controll digestion

Sample P3

volume	reagent
14 µl	Plasmid-DNA
0,25 µl	NcoI
2 µl	Buffer Tango (Fermentas)
0,25 µl	HindIII
2 µl	Buffer Red (Fermentas)
1,5 µl	ddH2O

Sample P4

volume	reagent
6 µl	Plasmid-DNA
0,25 µl	EcoRI
2 µl	Buffer EcoRI (Fermentas)
0,25 µl	NotI
2 µl	Buffer Orange (Fermentas)
9,5 µl	ddH2O

Sample Biobrick-clones

volume	reagent
5 µl	Plasmid-DNA
0,25 µl	EcoRI
2 µl	Buffer EcoRI (Fermentas)
0,25 µl	PstI
2 µl	Buffer Orange (Fermentas)
10,5 µl	ddH2O

Analytic Gelelectrophoresis

Friday, June 22nd

Transformation of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS

Investigator: Ingmar, Volker

Aim of the experiment: Plasmid amplification

Operation Sequence:

melting of 100 µl Ca-competent E.coli XL1-Blue cells
addition of 1 µl of the Plasmid pKS2µHyg-PAL-4Cl-CHS
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Saturday, June 23rd

Quick Change mutagenis to remove NgoMIV from pYES2

Investigator: Ingmar, Volker

Aim of the experiment: Generation of an RFC 25 compatible version of the pYes2 Vector.

PCR
Reaction batch

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P7 pYes2_RFC25 MCS 1.1 template
0.5 µl	1:10 dilution of O38 (10 pmol/µL)
0.5 µl	1:10 dilution of O39 (10 pmol/µL)
17 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	15	95°C	30 sec
		55°C	1 min
		68°C	6 min

The vector resulting from the PCR-product was named pYes2_RFC25 MCS 1.2.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells
addition of 1 µl of the Plasmid P7 pYes2_RFC25 MCS 1.2
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Sunday, June 24th

Miniprep of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS

Investigator: Ingmar, Volker

Aim of the experiment: Plasmid purification

Operation Sequence:

A single clone of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS was picked an transferred to 5 ml LB Amp on saturday evening. Incubation overnight at 37°C 180 rpm.
Using a Quiagen kit a miniprep of the overnight culture was done.

Quick Change mutagenis to remove NgoMIV from pYES2

Investigator: Ingmar, Volker

Aim of the experiment: Removal of a NgoMIV restriction site in the backbone of pYes2.

Operational sequence:

A single clone of E. coli pYes2_RFC25 MCS 1.2 was picked an transferred to 5 ml LB Amp. Incubation overnight at 37°C 180 rpm.

Transformation of 2 Biobricks into E. coli XL1-Blue

Investigator: Jeffery Truong

Aim of the experiment: Transformation of Biobricks into E. coli for plasmid propagation for PCR with new RFC pre- and suffix primer in order to do protein fusions.

2 Biobricks from the distribution kit were used: First, LexA (BBa_K105005, Plate 3 Well 9E) in the pSB1A2 plasmid with ampicillin resistance and second, the heme oxygenase (BBa_I15008, Plate 2 Well 13J) in the pSB2K3 plasmid with kanamycin resistance.

10 µL of autoclaved H2O were added to each well on the distribution kit. The well immediately turned red which means that one does it right.

The now resuspended DNA liquids were transferred into a new ERG on ice.

CaCL2 competent E. coli XL1-Blue cells from the stock were gently defrezed on ice.

For each Biobrick 100 µL cells were used and pooled together with 2 µL of plasmid DNA in a ERG on ice.

Incubation on ice for 30 min.

5 min heat shock at 37 °C.

Each ERG now is transferred in a new ERG prefilled with 1 mL of LB-medium and incubated in a cell-culture shaker at 37 °C for 45 min.

100 µL of these cell suspension were plated on antibiotic selection plates (Ampicillin for LexA and Kanamycin for heme oxygenase).

The rest of the cell suspension is centrifuged at 13000 rpm for 60 s and the supernatant is discarded.

The pellet is resuspended with 100 µL for each ERG and is plated on another antibiotic selection plate

These 4 plates were put at 37 °C overnight

Week 3

Vector Design (9 Experiments):

Quick Change mutagenisis of pYES2 for RFC25 compatibility and

Limonene (1 Experiment):

Repetition of analytical gelectrophoresis

Coumaryl (3 Experiments):

PCR of PAL, 4CL, CHS, OMT

Light Switchable Promoter (2 Experiments):

Verification of transformations (positive)

Show Details ...

Monday, June 25th

Miniprep of E. coli XL1-Blue with pYes2_RFC25 MCS 1.2

Investigator: Alois, Martin

Aim of the experiment: proof of successful removal of NgoMIV in the backbone of pYes2

Operation Sequence:

Mini prep of pYes2 1.2. The resulting purified DNA is P33.
Control digest of pYes2_RFC25 MCS 1.2 and p13 (+ analytical gel electrophoresis: 90 V, 1 h:

*  15 µl ddH20
*   2 µl NEBuffer4
* 0,5 µl NgoMIV
* 2,5 µl pYes2 1.2/p13
* 37°C, 1 h.

Quick Change mutagenis to remove SpeI from pYES2_RFC25 MCS 1.2

Investigator: Ingmar, Volker

Aim of the experiment: Generation of an RFC 25 compatible version of the pYes2 Vector.

PCR
Reaction batch

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P33 template
0.5 µl	1:10 dilution of O44 (10 pmol/µL)
0.5 µl	1:10 dilution of O45 ((10 pmol/µL)
17 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	15	95°C	30 sec
		55°C	1 min
		68°C	6 min

The procedure was furthermore applied to P13 and P14.
The vector resulting from the PCR-product was named pYes2_RFC25 MCS 1.3.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

This operation sequence was applied to the PCR prducts of P33, P13 and P14 respectively.
melting of 100 µl Ca-competent E.coli XL1-Blue cells
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Picking of E. coli cells on antibiotic selection plates: pSB1A2 plasmid with BBa_K105005 (LexA) and pSB2K3 plasmid BBa_I15008 (heme oxygenase)

Investigator: Jeffery Truong

Aim of the experiment: Picking colonies from transformed E. coli XL1-Blue, 4x picked for each Biobrick.

pSB1A2 plasmid with BBa_K105005 (LexA): Colonies were on both ampicillin selection plates, the one with diluted cell suspension and the one with concentrated E. coli cell suspension. Typical E. coli colony morphology. Picking was performed on the plate with diluted cell suspension.

pSB2K3 plasmid BBa_I15008 (heme oxygenase): Colonies were only on the kanamycin selection plate with concentrated cell suspension. The one with diluted susepension was empty. Typical but very small E. coli colonies. Picking was performed from the first plate.

Picked pipette tips was transferred into a special cell-culture tubes with air-permeable, but sterile cover. In each tube 4 mL of LB-medium + ampicillin (???)(for pSB1A2) or kanamycin (35 mg/mL) (for pSB2K3).

4 colonies for each Biobrick was picked; total: 8 tubes overnight culture.

These tubes were transferred in a cell culture shaker at 37 °C and were incubated overnight

Tuesday, June 26th

Quick Change mutagenis to remove SpeI from pYes2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a SpeI restriction site in the backbone of pYes2.

Operational sequence:

For each transformation of the PCR-products of P14 and P33 a single clone was picked an transferred to 6 ml LB Amp. Incubation overday at 37°C 180 rpm. The transfomation with the PCR product of P13 was not successfull. Therfore no clone could be picked.
Using a Quiagen kit a miniprep of the overnight culture was done.
The resulting purified DNA was aliquoted in new tubes labeled as follows:

PCR product of P33(transformation done by Ingmar): P29

PCR product of P33(transformation done by Saskia&Jara): P30

PCR product of P14(transformation done by Ingmar): P31

PCR product of P14(transformation done by Saskia&Jara): P32

Afterwards a control digestion of P29-P32 was done.

Reaction batch

Plasmid	P29	P30	P31	P32
NEB4 buffer	2 µl	2 µl	2 µl	2 µl
DNA	2,5 µl	2,5 µl	5 µl	5 µl
SpeI-HF	0.25 µl	0.25 µl	0.25 µl	0.25 µl
NgoMIV	0.25 µl	0.25 µl
ddH2O	15 µl	15 µl	12.75 µl	12.75 µl
Sum	20 µl	20 µl	20 µl	20 µl

Incubation at 37 °C for 1h.
Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 2 µl DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

Verification of the PCR products P30, P31 and P33

Investigator: Saskia, Jara

Aim of the experiment: Verification of the PCR produts P30, P31 and P33

Nano Drop

Sample	concentration [ng/µl]	260/280
P33	1072.6	1.01
P30	1588	1.28
P31	926.2	0.82

Analytical gel electrophoresis

gel: 1 %
band 1: 10 µl DNA ladder (1kb)
band 2: P30
band 3: P33
band 4: P31

Control of the competent cells and transformation with P20

Investigator: Saskia, Jara

Aim of the experiment: Control of the competent cells and transformation with P20 Transformation

competent cells: by Simon and Ingmar
plasmid: P20

result:

successful transformation: red colonies

PCR of PAL, 4CL, CHS, OMT (Coumaryl-CoA)

Investigator: Daniela, Mary

Determination of concentration of plasmids (Nanodrop): c(pKS2µHyg-PAL-4CL-CHS) = 500 ng/µl c (pOMT) = 20 ng/µl

PCR:

Name of tube	Enzyme	consensus (+)/ consensless (-)	used Oligos
CHS -	CHS	-	O13 and O24
CHS +	CHS	+	O23 and O24
PAL -	PAL	-	O15 and O16
PAL +	PAL	+	O22 and O16
OMT -	OMT	-	O17 and O26
OMT +	OMT	+	O25 and O26
4CL -	4CL	-	O19 and O20
4CL +	4CL	+	O21 and O20

Reaction batch

volume	reagent
5 µl	10x Pfu Ultra II buffer
4 µl	dNTP's (each 2.5 mM)
0.5 µl	Pfu Ultra II (2.5 U/µL)
5 µl	1:10 dilution of used forward primers (10µM)
5 µl	1:10 dilution of used reversed primers (10µM)
1 µl	DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL or pOMT 20 ng/µL)
29.5 µL	bidest. sterile Water

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	5 min (and adding Pfu Ultra after 3 min)
2	30	95°C	30 sec
		46°C	2.5 min
		72°C	1.5 min
3		72°C	5 min

PCR purification

Purification was done using QIAquick PCR Purification Kit (250)

Analytical Gel Electrophoresis:

-> going on with CHS, 4CL and OMT; the PCR of PAL will be repeated

Miniprep and analytical gel of picked transformed overnight culture with pSB1A2 plasmid with BBa_K105005 (LexA) pSB2K3 plasmid BBa_I15008 (heme oxygenase)

Investigator: Jeffery Truong, Georg Schützinger

Aim of the experiment: Plasmid isolation from the picked transformed overnight E. coli cells with pSB1A2 plasmid with BBa_K105005 (LexA) pSB2K3 plasmid BBa_I15008 (heme oxygenase).

The LB-medium with antibiotics of every tube was opaque which means that the picked cells were successfully inoculated.

Centrifugation step at 5000 rpm for 10 min at 16 °C.

Every single step now was performed on ice.

Miniprep (Qiagen Qiaprep spin) after manufacturer's protocoll.

Analytical restriction master mix was prepared after following scheme (Using XbaI and PstI):
- 4.4 µL XbaI
- 4.4 µL PstI
- 17.6 µL Tango-buffer (10x)
- 132 µL ELGA H2O

17.5 µL from the master mix was poooled together with 2.5 µL of plasmid DNA. That corresponds to 2.5 µL of plasmid DNA, 0.25 µL XbaI, 0.25 µL PstI, 2 µL Tango-buffer (10x), 15 µL ELGA H2O.

Incubation at 37 °C for 120 min on a ERG heating unit.

BUT: error was performed during preparing the digested plasmid DNA for analytical gelelectrophoresis in the dilution step. 1:10 dilution of analyctical probe with DNA loading buffer:
- 3.3 µL sample (contains already 1x loading buffer!)
- 0.7 µL loading buffer (?x)
- 6 µL TAE-buffer

Should have done: 3 µL sample + 1 µL loading buffer (10x) + 6 µL TAE-buffer (1x)

DNA-ladder preperation: 10 µL ladder stock solution + 10 µL DNA loading buffer + 80 µL TAE-buffer. 10 µL of this solution was pipetted in one gel pocket of the prepared 1% agarose gel including ehtiudiumbromid.

20 µL of each samples were also pipetted into the gel pockets.

The gel pockets were pipetted after following scheme:

Heme oxygenase (colony 1)	Heme oxygenase (colony 2)	Heme oxygenase (colony 3)	Heme oxygenase (colony 4)	DNA-ladder	LexA (colony 1)	LexA (colony 2)	LexA (colony 3)	LexA (colony 4)

Gel electrophoresis at 90 V

After 20 min the resolution was still poor; 20 min longer.

Analytical Gel okay, but samples interchanged

Wednesday, June 27th

Repetition of analytic gel of 21st June

Investigator: Andrea, Lara

Buffer systems were adjusted. -> only use of one buffer per reaction.

Friday, June 29th

Preparative digest of PCR-products of 4CL, CHS and OMT

Investigator: Katrin, Mary

each digestion will dure 2.5h at 37°C

CHS: digestion with Xba1 and HF-Age1 (both NEB)

volume	reagent
25µl	PCR-product
5µl	Buffer NEB4
0.5µl	BSA
1µl	Xba1 (NEB; 20u/µl)
1µl	HF-Age1 (NEB; 20u/µl)
17.5µl	bidest. sterile H2O

OMT: digestion with Xba1 and HF-Age1 (both NEB)

volume	reagent
25µl	PCR-product
5µl	Buffer NEB4
0.5µl	BSA
1µl	Xba1 (NEB; 20u/µl)
1µl	HF-Age1 (NEB; 20u/µl)
17.5µl	bidest. sterile H2O

4CL: digestion with Xba1 and Pst1 (both Fermentas)

volume	reagent
25µl	PCR-product
5µl	Buffer Tango
2µl	Xba1 (Fermentas; 10u/µl)
3µl	Pst1 (Fermentas; 10u/µl)
15µl	bidest. sterile H2O

Preparative Gelelectrophoresis of PCR-products of 4CL, CHS

Investigator: Katrin, Mary

Gelextraction of 4CL+, 4CL-, CHS+, CHS- (bands are as expected; +=with consensus-sequence, -=without consensus-sequence)

DNA-purification with Kit from Quiagen

Quick Change mutagenesis to remove PstI in URA3 from pYES2_RFC25 MCS 1.2

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pYes2 Vector.

PCR
Reaction batch

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P29 template
0.5 µl	1:10 dilution of O40 (10 pmol/µL)
0.5 µl	1:10 dilution of O41 ((10 pmol/µL)
17 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	15	95°C	30 sec
		55°C	1 min
		67°C	6.5 min

The procedure was furthermore applied to P31.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

This operation sequence was applied to the PCR prducts of P29 and P31 respectively.
melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Saturday, June 30th

Quick Change mutagenis to remove PstI in the URA 3 gene from pYes2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pYes2.

Operational sequence:

For each transformation of the PCR-products of P29 and P30 a single clone was picked an transferred to 6 ml LB Amp. Incubation overnight at 37°C 180 rpm. The transfomation with the PCR product of P31, P32 and P33 was not successfull. Therfore no clone could be picked from these plates and four instead of one clone was picked from the plates containing the transformations of P29.

Sunday, July 1st

Quick Change mutagenis to remove PstI in the URA 3 gene from pYes2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pYes2.

Operational sequence:

Using a Quiagen kit a miniprep of the overnight culture was done.
The resulting purified DNA was aliquoted in new tubes labeled as follows:

1st PCR product of P29: P34

2nd PCR product of P29: P35

3rd PCR product of P29: P36

4th PCR product of P29: P37

PCR product of P30: P38

Afterwards a control digestion of P34-P38 was done.

Reaction batch

Plasmid	P34	P35	P36	P37	P38
Fermentas 10x R buffer	0.5 µl	0.5 µl	0.5 µl	0.5 µl	0.5 µl
DNA	2 µl	2 µl	2 µl	2 µl	5 µl
PstI	0.25 µl	0.25 µl	0.25 µl	0.25 µl	0.25 µl
ddH2O	17.25 µl	17.25 µl	17.25 µl	17.25 µl	14.25 µl
Sum	20 µl	20 µl	20 µl	20 µl	20 µl

Incubation at 37 °C for 1h.
Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 4 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

All digest products show the expected two bonds at 3526 bp and at 2332 bp. The Miniprep product P35 was chosen to be used for the further Quickchange Mutagenesis.

Quick Change mutagenesis to remove PstI in the 2µ ori from pYES2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pYes2 Vector.

PCR
Reaction batch 1

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P35 template
0.5 µl	1:10 dilution of O42 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P35 template
0.5 µl	1:10 dilution of O43 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	10	95°C	30 sec
		55°C	1 min
		67°C	6 min

Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Week 4

Vector Design (6 Experiments):

Further Quickchanges for RFC25 compatibility and insertion of Ala before the strep tag

Limonene (8 Experiments):

Transformation with Schwab plasmids
PCR of both Schwab and BioBrick to make them RFC25 compatible

Coumaryl (4 Experiments):

Repetition of PCR with PAL and troubleshooting

Thaumatin (2 Experiments):

Miniprepping reporter BioBricks gfp/egfp/yfp

Constitutive Promoter (1 Experiment):

Transformation with BioBricks

Light Switchable Promoter (2 Experiments):

PCR of LexA BioBricks to introduce RFC25

Show Details ...

Monday, July 2nd

Repetition of PCR of PAL

Investigator: Mary

Reaction batch

volume	reagent
5 µl	10x Pfu Ultra II buffer
4 µl	dNTP's (each 2.5 mM)
0.5 µl	Pfu Ultra II (2.5 U/µL)
5 µl	1:10 dilution of used forward primers (10µM)
5 µl	1:10 dilution of used reversed primers (10µM)
1 µl	DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL)
29.5 µL	bidest. sterile Water

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	2 min (and adding Pfu Ultra after 2 min)
2	30	95°C	30 sec
		55°C	1 min
		72°C	2.5 min
3		72°C	5 min

PCR of LexA with primers including the RFC25 pre- and suffix

Investigator: Jeffery Truong, Georg Schützinger

Aim of the experiment: The Biobrick BBa_K105005 (LexA) has a RFC10 pre- and suffix, but we need RFC25 pre- and suffix for protein fusion, so we have to do a PCR with primer containing the RFC25 pre- and suffix.

The received forward and reverse primer TUM12-LexA-fw and TUM12-LexA-rv are resuspended in 204 µL and 221 µL ELGA water as described in the data sheet to get a final primer concentration of 100 pmol/µL=100 µM. For the PCR reaction mixture we took 0.5 µL of these resuspended primer and add 4.5 µL of ELGA water to get a final primer concentration of 10 µM.

Clone 3 of BBa_K105005 (LexA) has beed choosen for the PCR (ERG No. P23).

PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer
1 µl	10 µM Reverse Primer
0.25 µL	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl	Plasmid DNA (BBa_K105005) from P23 (Clone 3)
35.75 µL	ELGA Water
=50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	55 °C	60 s
	68 °C	60 s
Final extension	68 °C	5 min
Hold	4 °C	overnight

Tuesday, July 3rd

Analytic gelelectrophoresis of cleaned up PCR product from LexA with primer containing RFC25 pre- and suffix

Investigator: Jeffery Truong

Aim of the experiment: Analytical gelelectrophoresis of cleaned up PCR product from LexA (BBa_K105005) with primer containing the RFC25 pre- and suffix (TUM12-LexA-fw and TUM12-LexA-rv).

The clean-up of the PCR product LexA (BBa_K105005) with primer containing the RFC25 pre- and suffix (TUM12-LexA-fw and TUM12-LexA-rv) was performed with the QIAquick PCR Purification Kit from Qiagen after manufacturer's protocoll.

5 µL of the purificated PCR product was taken to perform a analytical gelelectrophoresis to verify the success of the PCR.

1% agarose gel containing ethidium bromide was used for the analytical gelelectrophoresis.

The analytical gelelectrophoresis was performed for 60 min at 90 V.

Scheme of the gel:

100 bp ruler	PCR product of BBa_105005	1000 bp ruler

LS: Plating of Schwab expression stains #106 & #108 which contain lavendula limonene synthase

Investigator: Lara

Aim of the experiment: To get colonies of BL21 strains containing lavendula LS for amplification and subsequent plasmid extraction.

Schwab strain #106 was plated on a chloramphenicol containing LB plate. #108 was plated on a amp+chlp containing LB plate. The plates were incubated at 37°C over night.

Quick Change mutagenis to remove PstI in the 2µ Ori from pYes2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pYes2.

Operational sequence:

From the transformation of the PCR-product of P35 two single clones were picked an transferred to 6 ml LB Amp. Incubation overnight at 37°C 180 rpm.

PCR of BBa_I742111 (Limonenesynthase) Clone 3 (Trafo 19.06.12)

Investigator: Andrea

PCR used forward primer with consensus sequence; PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer O27
1 µl	10 µM Reverse Primer O30
0.25 µl	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl	Plasmid DNA (BBa_I742111) Clone 3
35.75 µl	dd water
50 µL	TOTAL

PCR used forward primer without consensus sequence; PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer O28
1 µl	10 µM Reverse Primer O30
0.25 µl	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl	Plasmid DNA (BBa_I742111) Clone 3
35.75 µl	dd water
50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	47 °C	30 s
	68 °C	1,75 min
Final extension	68 °C	5 min
Hold	4 °C	1 h

Analytical Gelelectrophoresis

5 µl DNA + 1 µl loading buffer

Wednesday, July 4th

Quick Change mutagenis to remove PstI in the 2µ Ori from pYes2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Removal of a PstI restriction site in the backbone of pYes2.

Operational sequence:

Using a Quiagen kit a miniprep of the overnight culture was done.
The resulting purified DNA was aliquoted in new tubes labeled as follows:

1st Transformation of P35: P43

2nd Transformation of P35: P44

Afterwards a control digestion of P43 and P44 was done.

Reaction batch

Plasmid	P43	P44
Fermentas 10x R buffer	0.5 µl	0.5 µl
DNA	5 µl	5 µl
PstI	0.25 µl	0.25 µl
ddH2O	14.25 µl	14.25 µl
Sum	20 µl	20 µl

Incubation at 37 °C for 1h.
Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 4 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

All digest products show the expected bond at 5858 bp. The Miniprep product P40 was chosen to be used for the further Quickchange Mutagenesis.

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pYES2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pYes2 Vector; operating purfication possibility via Strep-tag II.

PCR
Reaction batch

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P44
1 µl	1:10 dilution of O54 (10 pmol/µL)
1 µl	1:10 dilution of O55 ((10 pmol/µL)
16 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	16	95°C	30 sec
		55°C	1 min
		68°C	6 min

Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Analytical Gelelektrophoresis of PCR-Products of PAL

Investigator: Mary

Aim of the experiment: purification and testing if PCR was successful

Purification of PCR-Products with purification kit from quiagen analytical gelelectrophoresis of PAL+, PAL-; expected band at 2,1 kb

Analytical Gel Electrophoresis: File:TUM12 20120704 PAL-PCR v2.tiff

-> PCR was not successful, no band at 2,1 kb

-> next steps: new Design of Primer and repetition of PCR with new primers

Picking of clones of Schwab expression stains #106 & #108

Investigator: Andrea

Aim of the experiment: Getting clones of cells with plasmids containing the gene for limonenesynthase and amplification of these clones for further plasmid preparation.

Picking of Clones

2 clones of every stain were picked
Incubation at 37 °C in LB + Amp (#108) / LB + Kan (#106)

Preparative Gelelectrophoresis of PCR-products of OMT

Investigator: Mary, Katrin

Aim of the experiment: Purification of the previously digested DNA, test if digestion was successful

picture follows!

Gelextraction of OMT- and OMT+ (bands are as expected; +=with consensus-sequence, -=without consensus-sequence)

DNA-purification with Kit from Quiagen

Thursday, July 5th

Preparation of plasmids containing lavendula LS

Investigator: Lara

Aim: Purify Schwab plasmids containing lavendula limonene synthase

Experiment was conducted using Qiagen Plasmid Miniprep Kit.

P39: Plasmid from Schwab strain #106 (1); 35 ng/µl

P40: Plasmid from Schwab strain #106 (2); 72 ng/µl

P41: Plasmid from Schwab strain #108 (1); 240 ng/µl

P42: Plasmid from Schwab strain #108 (2); 120 ng/µl

Restriction digest of Schwab plasmids

Investigator: Lara

Aim: To check whether extracted plasmids from Schwab expression strains #106 & #108 are OK.

Digest of plasmid from strain #106 was conducted with the following protocoll:

500 ng Plasmid DNA

0,25 µl Nco1

0,25 µl Hind 3

2 µl Buffer Tango

dd H2O to a total volume of 20 µl.

Digest of plasmid from strain #108 was conducted with the following protocoll:

500 ng Plasmid DNA

0,25 µl EcoR1

0,25 µl Not1

2 µl Buffer Orange

dd H2O to a total volume of 20 µl.

(All enzymes and buffers were from Fermentas).

Analytical gel electrophoresis of digested Schwab plasmids

Investigator: Lara Aim: Check plasmids for insert.

Plasmids were digested, 2 µl loading dye (10x) was added to each sample. Gel was loaded in the following order:

1. 6 µl gene ruler 1 kb, 2.-6. 11 µl of: P39, P40, P41, P42, Coumaryl-Plasmid (Katrin)

Analytical Gelelektrophoresis of plasmid pKS2µHyg-PAL-4Cl-CHS

Investigator: Katrin

Aim of the experiment: testing if PAL is part of the plasmid that was sent to us (troubleshooting because PCR of PAL was not successful)

digestion took 1 h at 37°C

digestion with ApaI (Fermentas)

volume	reagent
9.3 µl	plasmid pKS2µHyg-PAL-4Cl-CHS (miniprep)
2 µl	Buffer B
0.5 µl	ApaI (Fermentas; 10u/µl)
8.2 µl	bidest. sterile H2O

analytical gelelectrophoresis: expected band at 3,14 kb (Gal-PAL-XK)

-> experiment was successful, PAL is part of the plasmid pKS2µHyg-PAL-4Cl-CHS

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pYES2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pYes2 Vector; operating purfication possibility via Strep-tag II.

Operational sequence:

From the transformation of the PCR-product of P44 two single clones were picked an transferred to 6 ml LB Amp. Incubation overday at 37°C 180 rpm.
Using a Quiagen kit a miniprep of the overnight culture was done.
The resulting purified DNA was aliquoted in new tubes labeled as follows:

1st picked clone of P44: P45

2nd picked clone of P44: P46

Minipreparation of biobricks BBa_J52028, BBa_E2030, BBa_E2020

Investigator: Martin, Alois

Aim: Getting "reporter proteins"

10 µl water war added to the well of the distribution kit (=> red)
BBa_J52028: GFP with PEST191 tag => p51
BBa_E2030: EYFP, yeast optimized => p52
BBa_E2020: ECFP, yeast optimized => p53
Transformation + Minipreparation (Qiagen Plasmid Miniprep Kit)

Friday, July 6th

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pYES2_RFC25 MCS

Afterwards a control digestion of P45 and P46 was done.

Reaction batch

Plasmid	P45	P46
Fermentas 10x O buffer	2 µl	2 µl
DNA	3 µl	3 µl
PstI	0.25 µl	0.25 µl
ddH2O	14.75 µl	14.75 µl
Sum	20 µl	20 µl

Incubation at 37 °C for 1h.
Verification of control digest by agarose gel electrophoresis:

20 µl of each digest product was mixed with 4 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V.

All digest products show the expected bonds at 5858 bp. The Miniprep product P45 was chosen to check the insertion of Ala in front of the strep-tag II via DNA sequencing.

The results of the sequencing are shown below:

The sequencing results show that the insertion of Alanin in front of the Strep-tag II was not successful.

PCR of Schwab plasmid DNA to amplify gene for lavendula LS

Instructor: Lara

Aim: PCR of Schwab plasmids with primers which were designed to amplify the lavendula LS gene and to add RFC25 restriction sites.

3 different primer combinations were used:

1. O33/O37

2. O34/O37

3. O35/O37

Each primer combination was used for plasmid DNA amplification of P40 and P41.

PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer
1 µl	10 µM Reverse Primer
0.25 µl	OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
1 µl	Plasmid DNA (BBa_I742111) Clone 3
35.75 µl	dd water
50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	50 °C	30 s
	68 °C	1,75 min
Final extension	68 °C	5 min
Hold	4 °C	1 h

Analytic Gel of PCR of Schwab plasmid DNA

Instructor: Andrea

Minipreparation of biobricks BBa_J52028, BBa_E2030, BBa_E2020

Investigator: Martin, Alois

Aim: Getting "reporter proteins"

10 µl water war added to the well of the distribution kit (=> red)
BBa_J52028: GFP with PEST191 tag => p51
BBa_E2030: EYFP, yeast optimized => p52
BBa_E2020: ECFP, yeast optimized => p53
Transformation + Minipreparation (Qiagen Plasmid Miniprep Kit)

Saturday, July 7th

Quick Change mutagenesis to insert Ala in front of the Strep-tag II in pYES2_RFC25 MCS

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the pYes2 Vector.

As the sequencing of the first attempt to introduce Ala in front of the Strep-tag II did not show a successfull insertion of Ala, the quickchange mutagense was performed once again with a modified setup. Presumably a formation of primer dimers was responsable for the experiment's results. Therefore the second PCR was operated in two steps as shown below.

PCR
Reaction batch 1

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P44 template
0.5 µl	1:10 dilution of O54 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Turbo DNA polymerase (2.5 U / µl)

Reaction batch 2

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P44 template
0.5 µl	1:10 dilution of O55 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	10	95°C	30 sec
		55°C	1 min
		67°C	6 min

Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Transformation of E.coli XL1 blue with ADH1 promoter (BBa_J63005), ADH1 terminator(BBa_J63002) and TEF2 promoter from Igem Distribution kit

Investigator: Georg

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

2 µl of DNA was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on ampicillin plates for ADH1-P, and ADH1-T and Kanamycin plates for TEF2-Promoter.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin- and kanamycin plates.

Week 5

Limonene (4 Experiments):

Ligation of Schwab and BioBricks PCR products in pYES and pSB1C3

Coumaryl (10 Experiments):

Repetition of PCR with PAL
Transformation with PCR products of OMT, 4Cl and CHS

Thaumatin (1 Experiment):

Preparation of YPD medium

Constitutive Promoter (10 Experiments):

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder

Light Switchable Promoter (14 Experiments):

Show Details ...

Monday, July 9th

Picking of colonies of TEF2-P, ADH1-P, ADH1-T (Igem)

Investigator: Georg

To 5 µl LB-Medium,5 µl of 1000x stock of ampicillin (ADH-P, ADH1-T) and kanamycin (TEF2-P) were added
4 colonies from the plate with TEF2-P and 5 colonies of ADH1-P and ADH1-T were picked
Each colony was transferred into 5 ml LB-Medium with 1x ampicillin or kanamycin
Incubation over night at 37°C in the 180rpm cell-culture shaker.

Repetition of picking of colonies of ADH1-P, ADH1-T, TEF2-P from iGEM distribution kit

Investigator: Georg

Analytical Gel was loaded with 9 µl digestion and 1 µl 10x buffer

Repetition of picking of colonies of TEF2-P, ADH1-P, ADH1-T (Igem)

Investigator: Georg

Only ADH1 promoter showed cell proliferation. The rest showed no proliferation.The reason was a 10x too high amount of antibiotics.

Colonies from transformation from ADH1-promoter and terminator were picked again and incubated in LB medium with

ampicillin at a dilution of 1:1000 and for TEF2 –Promoter with Kanamycin at a dilution of 1:1000

From the grown colonies from the transformation with ADH1-Promoter then were the plasmids extracted, using the

Quiaprep Spin Miniprep kit from Quiagen

The extracted ADH1-P DNA was then analytically digested with XbaI and PstI from Fermentas

Reaction batch for digestion:

volume	reagent
1 µl	PSTI (Fermentas)
1 µl	XbaI (Fermentas)
8 µl	Tango buffer
60µl	dd H20
=70µl	TOTAL

To 17,5 µl mastermix was 2,5 µl of plasmid DNA added

to 2,5 ml of DNA 17,5 µl reaction batch were added
Digestion took place at 37°C for 1 h

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 1/4)

Investigator: Jeff, Alois, Martin

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

50 g of Spirulina platensis powder was (from concept-vitalprodukte.de) resuspended in 1.5 l of H2O (30 mg/l) in a beaker covered with aluminium foil.

Stirring for 10 min at RT.

Green Spirulina suspension was divided in 6 centrifuge bottles, covered in aluminium foil.

Centrifation at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 1 h.

Supernatant was discarded

25 ml of MeOH added to each bottle and was heavily shaked to resuspend the pellet for the next cleaning step with MeOH.

Each bottle with the resuspended pellet were filled with MeOH to a final volume of 250 ml and shaked again to fully resuspend the pellet.

Centrifugation at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 10 min.

Supernatant was discarded.

The last 4 steps were repeated until the supernatant of the washed pellet was colorless or cyanblue but not green anymore (Regulary, it takes 3 or 4 times). Pellet should be cyanblue now.

The pellet of the 6 centrifuge tubes was collected in a sole centrifugation tube, covered in aluminium foil tube, by scratching it out with a small spoon.

The remaining rest of the pellet which cannot be scratched out were resuspended in a small amount of MeOH and were transformed from tube to tube with a interim shaking step.

This suspension was transferred into the tube with the scratched-out pellet.

Centrifugation at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 10 min.

Supernatant was discarded.

Finally washed pellet was stored, wrapped in foil overnight for the methanolysis next day.

Tuesday, July 10th

Analytical digestion of ADH1-P and gelelectrophoresis

Investigator: Georg

Reaction batch for digestion:

volume	reagent
1 µl	PstI-HF (NEB)
1 µl	XbaI (NEB)
8 µl	NEB-4 buffer
0,8 µl	100 x BSA (NEB)
59,2 µl	dd H20
=70µl	TOTAL

Extraction of ADH1-P, TEF2-T with plasmid

Investigator: Georg

Plasmid-DNA was extracted according to Quiaprep Plasmid extraction kit

Inoculation of TEF1-P, PGK-P, Cyc-T

Investigator: Georg

Transfomed E. coli cells from iGEM were inoculated onto Amp-LB-Plates in case of PGK1-P and Cyc1-T
E. coli with TEF1-T were inoculated onto psb1c3

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 2/4)

Investigator: Jeff, Alois, Martin

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

Washed pellet from the day before was resuspended in 500 ml MeOH.

Heat suspension in a 500 ml flask in a water bath at 70 – 75 ºC with a condensing coil cooled with water for 5 – 8 hrs.

After this, the suspension was transferred into a new centrifuge tube and centrifuged at 10500 rpm at 4 °C (SLA-3000 rotor, Thermo Scientific) for 20 min.

The supernatant was decanted trough a filter paper into new centrifugation tube and stored, wrapped in a aluminium foil, at -20 °C.

The pellets also was stored, wrapped in a aluminium foil, at -20 °C.

Plating of received E. coli containing biobricks

Investigator: Jeff

Aim of the experiment: The received biobricks were already transformed in E. coli and were in an agar stabs. These E. coli cells were transferred with an inoculation loop on antibiotic selection plates and were incubated over night.

Operational sequence:

Bacterias containing plasmids with biobricks were transferred with a sterile inoculation loop on antibiotic plates and were incubated at 37 °C overnight.

The biobricks were: BBa_K207001 in pSB1A2, BBa_K243006 in BBa_K157000, BBa_K300001 in K300007 (part for other subproject), BBa_K268000 in pSB6A0 (part for other subproject), BBa_K365005 RFC25 in pSB1C3, BBa_K365000 in pSB1C3, BBa_K207000 in pSB3K3, BBa_K165031 in pSB1AK3

Wednesday, July 11th

Analytical digestion and gelelectrophoresis of ADH1-Terminator and TEF2-P

Investigator: Georg

Transformants of ADH1-T showed no Plasmid
TEF2 Promoter-colonies were all positive

Picking of inoculated CYC1-T, TEF1-P, PGK1-P for overnight cultures

Investigator: Georg

To 5 µl LB-Medium,5 µl of 1000x Chloramphenicol were added
4 colonies from the plate with TEF1-P, 4 colonies of Cyc-T were picked and 4 colonies of PGK1-P were picked
Each colony was transferred into 5 ml LB-Medium with 1x Chloramphenicol (TEF1-P)or Amp (PGK1-P, Cyc1-T)
Incubation over night at 37°C in the 180rpm cell-culture shaker.

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 3/4)

Investigator: Jeff, Alois, Martin

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

The pellet after the first methanolysis of the day before was undergone a second methanolysis step to ensure high efficiacy of PCB extraction. Operational sequence was performed like the first methanolysis including the centrifugation and filtering step. The pellet after the second methanolysis should be more colorless and the filtered supernatant was freezed, like the one from the first methanolysis, at -20 °C, wrapped in aluminium foil

Transformation of E. coli XL1-Blue with pGADT7 and pGBKT7 plasmid for Yeast-two-hybrid (Y2H)

Investigator: Jeff

Aim of the experiment: pGADT7 and pGBKT7 are plasmids containing the transcriptional activation domain or the DNA binding domain of the transcription activator Gal4. pGADT7 contains the transcriptional activation domain of gal4; we want to clone the the first 100 residues of Pif3 (BBa_K365000) into this plasmid. As a result we have a fusion contruct of Gal4 and Pif3, which is nescassary for the light-switchable promoter system. pGBKT7 is for backup, if the ordered biobricks are not working.

Operational sequence:

E. coli XL1-Blue are transformed with pGADT7 and pGBKT7 seperately after standard protocol of our lab.

Introducing new Saccharomyces cerevisiae strain (Y190 strain) from Schwab lab for Y2H

Investigator: Jeff

Aim of the experiment: The Y190 Saccharomyces cerevisiae is a special strain for Yeast-two-hybrid. This strain carries a Gal4 and Gal80 deletion to higher the signal/noise-ratio of protein-protein interactions. Reporter for protein-protein interactions are HIS3, lacZ and MEL1 and are encoded in the genomic DNA. Transformation markers are trp1, leu2 and cyhR2 and are encoded on the transformation plasmids.

Operational sequence:

The freshly plated Y190 cells are transferred with a inoculation loop from the original plate on a new YPD agar plate.

After 2 days the the plate was put in 4 °C.

Repetition of PCR of PAL

Investigator: Katrin, Daniela

Reaction batch

volume	reagent
5 µl	10x Pfu Ultra II buffer
4 µl	dNTP's (each 2.5 mM)
0.5 µl	Pfu Ultra II (2.5 U/µL)
5 µl	1:10 dilution of used forward primers (10µM)
5 µl	1:10 dilution of used reversed primers (10µM)
1 µl	DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL)
29.5 µL	bidest. sterile Water

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	2 min (and adding Pfu Ultra after 2 min)
2	30	95°C	30 sec
		52°C	1 min
		72°C	2.5 min
3		72°C	5 min

PCR purification

Purification was done using QIAquick PCR Purification Kit (250)

Analytical gelelektrophoresis of PCR-Products of PAL

-> PCR was not successful, no band at 2,1 kb (picture follows)

Preparative Digest of pYES_iGEM

Investigator: Katrin, Daniela

Digestion of P50 with Xbal and NgOMIV

volume	reagent
10 µl	P50 (concentration: 264.5 ng/µl)
2.5 µl	NEB4
2.5 µl	10x BSA
1 µl	XbaI (20 U/µl)
2 µl	NgOMIV (10U/µl)
7 µl	ddH2O

Incubation: 37 °C, 3 h

Digestion of P50 with Xbal and PstI

volume	reagent
10 µl	P50 (concentration: 264.5 ng/µl)
5 µl	Tango buffer
2 µl	XbaI
3 µl	PstI
7.5 µl	ddH2O

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

gel: 1% with LMP-agarose
band 1: P50 digested with XbaI and PstI
band 2: P50 digested with XbaI and NgOMIV
70 V, 90 min

Gelextration

cut the bands
QIAquick Gel Extractrion Kit was used
- step 6 was left out
- step 9: 30µl buffer, 4 min incubation

Ligation of digested P50 with digested PCR-products of PCR 15-20 (4CL, CHS and OMT)

Investigator: Katrin, Daniela

Concentration (Nano Drop:
4CL+ (PCR 15) = 40.3 ng/µl
4CL- (PCR 16) = 37.3 ng/µl
CHS+ (PCR 17) = 46.1 ng/µl
CHS- (PCR 18) = 51.2 ng/µl
OMT+ (PCR 19) = 22.3 ng/µl
OMT- (PCR 20) = 16.7 ng/µl

P50 digested with XbaI and PstI = 23.9 ng/µl (the digested Plasmid has the number P71)
P50 digested with XbaI and NgOMIV = 28.4 ng/µl (the digested Plasmid has the number P72)

required volumes were calculated using Lab Tools

4CL+ (PCR 15) with P50 digested with XbaI and PstI

volume	reagent
5.27 µl	P50 digested
2.73 µl	4CL+ (PCR 15)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

4CL- (PCR 16) with P50 digested with XbaI and PstI

volume	reagent
5.13 µl	P50 digested
2.87 µl	4CL- (PCR 16)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

CHS+ (PCR 17) with P50 digested with XbaI and NgOMIV

volume	reagent
5.84 µl	P50 digested
2.16 µl	CHS+ (PCR 17)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

CHS- (PCR 18) with P50 digested with XbaI and NgOMIV

volume	reagent
6 µl	P50 digested
2 µl	CHS- (PCR 18)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

OMT+ (PCR 19) with P50 digested with XbaI and NgOMIV

volume	reagent
4.45 µl	P50 digested
3.55 µl	OMT+ (PCR 19)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

OMT- (PCR 20) with P50 digested with XbaI and NgOMIV

volume	reagent
3.87 µl	P50 digested
4,13 µl	OMT- (PCR 20)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

Negative control

volume	reagent
5 µl	P50 digested with XbaI and PstI or NgOMIV
3 µl	ddH2O
1 µl	T4 DNA-ligase
1 µl	T4-ligase buffer (10x)

water bath 16 °C

Thursday, July 12th

Genextraction and analytical digestion of CYC1-terminator, TEF1-promoter, and PGK1-Promoter from pSB1C3 and pSB1A2

Investigator: Georg

Genes from overnight cultures were extracted, using the Quiaprep gene extraction Kit. Extracted Plasmids then were analytically digested with XbaI and PstI (Fermentas).

Analytical digestion XbaI, PstI

Chemical	Volume
XbaI	2,5 µl
PstI	2,5 µl
10xBuffer Tango	2 µl
Plasmid-DNA	2,5 µl
ddH2O	165,5 µl
=175µl	TOTAL

Analytical gel was run (1% Agarose).

Phycocyanobilin (PCB) extraction from dried Spirulina platensis powder (part 4/4)

Investigator: Martin, Jeff, Alois

Aim of the experiment: Phycocyanobilin (PCB) is a cofactor neeeded for the funtion of phytochrome B. Phycocyanobilin is covalently bound to Cys457 of phytochrome B. Saccharomyces cerevisiae does not contain endogenous PCB. For proof of concept PCB should be added to the medium. In the following experiment, PCB is extracted from dried Spirulina platensis powder.

Operational sequence:

The supernatants (~1l in total) of the two previous experiments were pooled and put into a rotary evaporater in order to acquire a concentrate of approximately 100ml.
The settings of the rotary evaporater: ~160 millibars, waterbath temperature of 25-30°C
Furthermore, there were measures to be taken to protect the solution from direct sunlight: blinds down, aluminum foil wrapped around the waterbath

Afterwards we transfered the Methanol solution into a separating funnel and added another 100ml of aqua dest..
By means of adding chloroform we created two phases. The lower (chloroform) phase with the solved Phycocyanobilin was separated and put into another rotary evaporater flask. This step was repeated three times in order to get all the Phycocanobilin into the next step

Then the chloroform was completely removed in the rotary evaporater (same settings as before), the pure (?) Phycocyanobilin in the flask was solved in 60 ml DMSO, transfered into a new flask and frozen at -20 °C.

Picking of transformated (pGADT7 and pGBKT7) E. coli cells on antibiotic selection plates

Investigator: Jeff

Aim of the experiment: pGADT7 and pGBKT7 are plasmids containing the transcriptional activation domain or the DNA binding domain of the transcription activator Gal4. pGADT7 contains the transcriptional activation domain of gal4; we want to clone the the first 100 residues of Pif3 (BBa_K365000) into this plasmid. As a result we have a fusion contruct of Gal4 and Pif3, which is nescassary for the light-switchable promoter system. pGBKT7 is for backup, if the ordered biobricks are not working.

Operational sequence:

A E. coli colony was picked for each plasmid and was transferred in a tube containing 4 ml of LB-medium containing antibiotics (Amp for pGADT7 and Kan for pGBKT7).

Overnight culture at 37 °C in a cell-culture shaker.

Miniprep of transformated E. coli from overnight culture (8 plasmids containing biobricks)

Investigator: Andrea

Aim of the experiment: Miniprep of transformated E. coli from overnight culture to get the plasmids with biobricks

NanoDrop Measure

Plasmid	Concentration
P73	41.6 ng/µl
P74	85.2 ng/µl
P75	72.4 ng/µl
P76	254.3 ng/µl
P77	74.4 ng/µl
P78	50.0 ng/µl
P79	46.2 ng/µl
P80	116.7 ng/µl
P81	77.1 ng/µl
P82	65.5 ng/µl

Analytical digestion and gelelectrophoresis of biobricks (8 plasmids containing biobricks)

Investigator: Jeff

Aim of the experiment: Checking whether the biobricks are part of the plasmid-backbone.

Operational sequence:

Reaction batch for each plasmid:

Reagent	Volume in µl
Tango Buffer 10x	4 µl
XbaI (Fermentas)	0.25 µl
PstI (Fermentas)	0.5 µl
Plasmid DNA	2.5 µl
ddH2O	12.75 µl
TOTAL	20 µl

Incubation at 37 °C for 1 h 45 min.

Analytical gelelectrophoresis at 90 V for 1 h.

Order of gel-pockets:

100 bp ladder	P82	P81	P80	P79	P76	P75	P74	P73	1 kbp ladder
	OK	BAD	OK	OK	OK	OK	OK	BAD

P73 and P81, both parts from Havard university are bad. To exclude errors, one should pick another colony for each plasmid and do again the analytical digestion and gelelectrophoresis after the miniprep.

Transformation of Ligationproducts of pYES2 + OMT, 4Cl and CHS in E.coli

Investigator: Mary

adding 5µl ligation product in 100µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (Withouth antibiotica) and incubate at 37°C, 30 min, 180 rpm
plate on agar with Ampicillin over night

Repetition of PCR of PAL

Investigator: Daniela

Aim of the experiment: Repetition of PCR of PAL (so far not successful) with the use of different polymerase and try of 3 temperatures

only with PAL+, 3 different temperatures (see cycling parameters) and one batch at 52.5 °C with DMSO

Reaction batch

volume	reagent
10 µl	5x Herculase II reaction buffer
0,5 µl	dNTP Mix (each dNTP 2.5 mM)
1 µl	Herculase II fusion DNA Polymerase
1,25 µl	1:10 dilution of used forward primers (O22)
1,25 µl	1:10 dilution of used reversed primers (O59)
1 µl	1:10 dilution of DNA (P19=pKS2µHyg-PAL-4CL-CHS 50 ng/µL) -> 5 ng/µL
35 µL	ddH2O

Reaction batch with DMSO

volume	reagent
10 µl	5x Herculase II reaction buffer
0,5 µl	dNTP Mix (each dNTP 2.5 mM)
1 µl	Herculase II fusion DNA Polymerase
1,25 µl	1:10 dilution of used forward primers (O22)
1,25 µl	1:10 dilution of used reversed primers (O59)
1 µl	1:10 dilution of DNA (pKS2µHyg-PAL-4CL-CHS 50 ng/µL) -> 5 ng/µL
1,5 µl	DMSO (3% des Ansatzes)
33.5 µL	ddH2O

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	2 min
2	30	95°C	30 sec
		52.5°C	30 sec
		72°C	4 min
3		72°C	3 min

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	2 min
2	30	95°C	30 sec
		45°C	30 sec
		72°C	4 min
3		72°C	3 min

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	2 min
2	30	95°C	30 sec
		56.2°C	30 sec
		72°C	4 min
3		72°C	3 min

Analytical gel electrophoresis

no bands at all (picture follows)
possibly due to low concentration of P19 (5 ng/µl)

Ligation of P93 (pSB1C3 digested with XbaI and AgeI) with digested PCR-products of PCR 17-20 (CHS and OMT)

Investigator: Daniela

Concentration (Nano Drop:
CHS+ (PCR 17) = 46.1 ng/µl
CHS- (PCR 18) = 51.2 ng/µl
OMT+ (PCR 19) = 22.3 ng/µl
OMT- (PCR 20) = 16.7 ng/µl

P93 (digested with XbaI and AgeI) = 4.8 ng/µl

CHS+ (PCR17) with P93 digested with XbaI and AgeI

volume	reagent
7.04 µl	P93
0.96 µl	CHS+ (PCR 17)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

CHS- (PCR 18) with P93 digested with XbaI and AgeI

volume	reagent
7.13 µl	P93
0.87 µl	CHS- (PCR18)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

OMT+ (PCR19) with P93 digested with XbaI and AgeI

volume	reagent
6.19 µl	P93
1.81 µl	OMT+ (PCR19)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

OMT- (PCR20) with P50 digested with XbaI and AgeI

volume	reagent
5.75 µl	P93
2.25 µl	OMT- (PCR20)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

Negative control

volume	reagent
5 µl	P93
3 µl	ddH2O
1 µl	T4 DNA-ligase
1 µl	T4-ligase buffer (10x)

water bath 16 °C
products were named P94-P97

Preparative digest of PCR1-PCR7 and P50

Investigator: Andrea

Digestion of P50 with XbaI and NgoMIV

volume	reagent
20 µl	P50
4 µl	NEB Buffer
0.4 µl	BSA
1 µl	XbaI (10 U/µl)
2 µl	NgoMIV (10 U/µl)
27.4 µl	ddH2O

Digestion of PCR1-PCR7 with XbaI and AgeI

volume	reagent
25 µl	PCR-Product
5 µl	NEB Buffer
0.5 µl	BSA
1 µl	XbaI (10 U/µl)
1 µl	AgeI (10 U/µl)
32.5 µl	ddH2O

Incubation: 37 °C, 3 h

Preperative gel electrophoresis

Investigator: Andrea

Aim of the experiment: Analytical gel electrophoresis of products from restriction digest of plasmids PCR1 - PCR7 and PCR9

Limonensynthase: 1600 bp

Ligation of digested PCR1-PCR7 (digested with XbaI and AgeI) with pSB1C3 (digested with XbaI and AgeI) and with pYESnew (digested with XbaI and NgoMIV)

Investigator: Andrea

Concentration (Nano Drop:
LIMS Citrus (PCR 1) = 13.4 ng/µl
LIMS Citrus (PCR 2) = 10.3 ng/µl
LIMS Lavendula (PCR 3) = 2.2 ng/µl
LIMS Lavendula (PCR 3) = 9.9 ng/µl
LIMS Lavendula (PCR 3) = 9.6 ng/µl
LIMS Lavendula (PCR 3) = 9.8 ng/µl
LIMS Lavendula (PCR 3) = 12.3 ng/µl

P50 (digested with XbaI and NgoMIV) = 10.3 ng/µl

P93 (digested with XbaI and AgeI) = 4 ng/µl

PCR1 with P50 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.89µl	P50
3.11 µl	PCR 1
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR2 with P50 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.38 µl	P50
3.62 µl	PCR2
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR3 with P50 digested with XbaI and AgeI/NgoMIV

volume	reagent
1.64 µl	P50
6.36 µl	PCR3
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR4 with P50 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.3 µl	P50
3.7 µl	PCR4
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR5 with P50 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.26 µl	P50
3.74 µl	PCR5
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR6 with P50 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.26 µl	P50
3.74 µl	PCR6
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR7 with P50 digested with XbaI and AgeI/NgoMIV

volume	reagent
7.83 µl	P50
3.27 µl	PCR7
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

Negative control

volume	reagent
5 µl	P50
3 µl	ddH2O
1 µl	T4 DNA-ligase
1 µl	T4-ligase buffer (10x)

PCR1 with P93 digested with XbaI and AgeI

volume	reagent
4.89 µl	P93
3.11 µl	PCR1
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR2 with P93 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.38 µl	P93
3.62 µl	PCR2
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR3 with P93 digested with XbaI and AgeI/NgoMIV

volume	reagent
1.52 µl	P93
6.48 µl	PCR3
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR4 with P93 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.3 µl	P93
3.7 µl	PCR4
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR5 with P93 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.26 µl	P93
3.74 µl	PCR5
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR6 with P93 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.26 µl	P93
3.74 µl	PCR6
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR7 with P93 digested with XbaI and AgeI/NgoMIV

volume	reagent
4.72 µl	P93
3.28 µl	PCR7
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

water bath 16 °C
products were named P100-P115

Friday, July 13th

Transformation of ADH1-T

Procedure:

Investigator: Georg

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

2 µl of ADH-T plasmid was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on ampicillin plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

PCR of P73, P80 and P81 to add RFC25 pre- and suffix

Investigator: Jeff, Saskia

Aim of the experiment: Introducing RFC25 pre- and suffix into parts of P73, P80 and P81.

Operational sequence:

PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer (For P73: O46 (TUM12-PhyBGal4bd-fw); for P80: O31 (TUM12-LSPS-fw); for P81: O50 (TUM12-Phyb-fw))
1 µl	10 µM Reverse Primer (For P73: O47 (TUM12-PhyBGal4bd-rv); for P80: O32 (TUM12-LSPS-rv ); for P81: O51 (TUM12-Phyb-rv))
0.25 µL	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl	Plasmid DNA (P80 or P73 or P81)
35.75 µL	ELGA Water
=50 µL	TOTAL

The gradient PCR program was performed after following scheme with following conditions (Tm=58 ΔG=5 °C; P73 in row 9(=61.1 °C); P80 in row 1 (=53.0 °C); P81 in row 7(=58.4 °C):

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	Tm=58 °C; ΔG=5 °C	150 s
	68 °C	60 s
Final extension	68 °C	5 min
Hold	4 °C	overnight

Miniprep, analcytical digestion and gelelectrophoresis of pGADT7 and pGBKT7

Investigator: Jeff, Saskia

Aim of the experiment:Miniprep, analcytical digestion and gelelectrophoresis of pGADT7 (tube P98, EcoRI and BamHI)and pGBKT7 (tube P99, BamHI and PstI)

Operational sequence:

Operated after standard protocol of the lab for analytical digestion and gelelectrophoresis.

Gel OK, like expected

Preperative digestion and gelelectrophoresis of P79 and O56???

Investigator: Jeff, Saskia, Georg

Aim of the experiment: Preperativ gelelectrophoresis and gel of digested PCR product of LexA (NgoMIV+PstI) and pSB1C3 containing the RFC25 compatible 20aa linker with RFC25 pre- and suffix (AgeI and PstI).

Operational sequence:

Operated after standard protocol of the lab for preperative digestion and gelelectrophoresis.

Gel OK, like expected.

Preparative digest of P19

Investigator:Daniela, Ingmar

Digestion of P19 with ApaI

volume	reagent
20 µl	P19 (concentration: 53.8 ng/µl)
4 µl	Buffer B
2 µl	ApaI (10 U/µl)
14 µl	ddH2O

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

gel: 1% with LMP-agarose
band 1: P50 digested with XbaI and PstI
band 2: P50 digested with XbaI and NgOMIV
70 V, 90 min

Gelextration

cut the bands
QIAquick Gel Extractrion Kit was used
- step 6 was left out
- step 9: 30µl buffer, 4 min incubation

Gradient PCR of PAL to optimize the primer annealing temperature

Investigator: Ingmar

Aim of the experiment: As all PCR experiments to amplify the PAL gene contained in P19 failed, we decided to run a gradient PCR to optimize the primer annealing temperature.

PCR
Reaction batch

volume	reagent
1 µl	10x Pfu Ultra II buffer
0.5 µl	Plasmid P19 template
0.5 µl	1:10 dilution of O15 (10 pmol/µL)
0.5 µl	1:10 dilution of O59 (10 pmol/µL)
0.25 µl	dNTP mix
7 µl	ddH2O
0.25 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	29	95°C	30 sec
		gadient 33-47.5 °C	1 min
		68°C	3 min
3	1	68°C	5 min
4	1	4°C	infinity

Verification of the PCR by agarose gel electrophoresis:

10 µl of each PCR tube was mixed with 2 µl 6x DNA loading buffer and loaded into the gel. The separation process lasted 1h at 90 V in a 1% agarose gel.

A bond at the expected length of 2160 bp appears at 47 °C. Therefore a PCR using this primer annealing temperature will done on sunday.

Transformation of P94 - P97 (ligationproducts of pSB1C3 with CHS and OMT respectively) in E.coli

Investigator: Daniela

adding 5µl ligation product (P94-P97) in 100µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (Withouth antibiotica) and incubate at 37°C, 30 min, 180 rpm
plate on agar with Ampicillin over night

wrong antibiotica was used!!! Repetition follows!!! Nevertheless, some colonies could be observed.

Ligation of LIMS in pYESnew and pSB1C3

Investigator:Andrea

Transformation

adding 5µl ligation product (PCR1-PCR7) in 100µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min, 180 rpm
plate on agar with Ampicillin (pYESnew) or Chloramphenicol (pSB1C3) over night

Preparation of YPD medium

Investigator: A lot of Alois, Martin

Manual for YPD production Yeast Extract Peptone Dextrose Medium (1 liter)

1% yeast extract
2% peptone
2% dextrose (D-glucose)

1. Dissolve the following in 1000 ml of water:

10 g yeast extract
20 g peptone
20 g dextrose (see note below if making plates)

2. Autoclave for 20 minutes on liquid cycle.

3. Store medium at room temperature. The shelf life is approximately one to two months.

Sunday, July 15th

PCR purification of PCR products of P73, P80 and P81 and analytical gelelectrophoresis

Investigator: Jeff

Aim of the experiment: PCR was performed to introduce restriction sites to the gene of interest. MfeI and BamHI for P73 and RFC25 pre- and suffix for P80 and P81. The aim is to contruct fusion proteins with the aid of these restriction sites.

Operational sequence:

PCR cleaning with Qiagen PCR purification kit after manufacturer's protocol.

Analytical gelelectrophoresis (1% agarose) at 90 for 60&min.

PCR of PAL consless using the optimized primer annealing temperature of 47 °C

Investigator: Ingmar

Aim of the experiment: Amplification of the PAL gene contained in P19.

PCR
Reaction batch

volume	reagent
5 µl	10x Pfu Ultra II buffer
2.5 µl	Plasmid P19 template
2.5 µl	1:10 dilution of O15 (10 pmol/µL)
2.5 µl	1:10 dilution of O59 (10 pmol/µL)
1.25 µl	dNTP mix
35 µl	ddH2O
1.25 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	29	95°C	30 sec
		47 °C	1 min
		68°C	3 min
3	1	68°C	5 min
4	1	4°C	infinity

PCR successful - Band at about 2,1 kb :

Week 6

Vector Design (2 Experiments):

Limonene (6 Experiments):

Coumaryl (17 Experiments):

Thaumatin (3 Experiments):

Inoculation of YPD medium with S. cerevisiae and brewing yeast strain 34/70

Constitutive Promoter (6 Experiments):

Light Switchable Promoter (16 Experiments):

Show Details ...

Monday, July 16th

Inoculation of ADH1-T (iGEM)

Investigator: Georg

Transformantion with ADH1-T didn't go well
By iGEM transformed cells with ADH1-T were inoculated onto Amp-LB-Plates
Cells were to grow at room-temperature over the weekend

Preparative digestion and gelelectrophoresis of P86 and P55

Investigator:Georg Aim of the experiment: Digestion of CYC1-Terminator, ADH1-Promoter for ligation

Preparative digestion after manufacturer's advice (NEB) with 20 u PstI and 20 u XbaI in 1x Tango buffer with 25 µl DNA and 4 µl NEB4 10x buffer and 0,4 µl 100x BSA. Water was added to a volume of 40 µl. Restriction time was 3 hours at 37 °C; 3 hours.

Preparative gelelectrophoresis after laboratory's standart protocol. (70 V, 90 min)

Gel was stored at -20 °C.

Preperative digestion and gelelectrophoresis of P98 and PCR26

Investigator: Jeff, Georg

Aim of the experiment: Construction of Gal4AD-Pif3, a part of the light-switchable promoter system.

Operational sequence:

Preperative digestion after manufacturer's (Fermentas) advise for double-digestion for EcoRI+BamHI and MfeI(MunI)+BamHI; EcoRI+BamHI: Buffer 2X Tango™, 2-fold excess of BamHI; MfeI(MunI)+BamHI: Buffer G.

Preperative gelelectrohphoresis after laboratory's standard protocol. (70 V, 90 min)

Plating of received E. coli containing biobrick BBa_K165055

Investigator: Jeff

Aim of the experiment: The received biobrick BBa_K165055 (LexA binding sites + mCYC + Kozak + YFPx2 + ADH1 terminator) were already transformed in E. coli and were in an agar stabs. These E. coli cells were transferred with an inoculation loop on antibiotic selection plates and were incubated over night.

Operational sequence:

Bacterias containing plasmids with biobricks were transferred with a sterile inoculation loop on antibiotic plates and were incubated at 37 °C overnight.

The biobricks was BBa_K165055 in BBa_J63009 plasmid (AmpR, low copy plasmid)

Preparatory culture of S. cerevisiae

Investigator: Alois, Martin

Aim of the experiment: In order to have sufficient viable cells to inoculate an experimental culture in which we want to compare the growth rate of s. cerevisiae with a strain of brewing yeast (34/70 s. pastorianus weihenstephan) we aim to establish a preparatory over night culture.

Operational sequence: A sample of -80°C stored s. cerevisiae (glycerol stock) is used to inoculate 20ml of YPD-medium. This is shaken overnight at 30°C.

Miniprep of plasmids containing lavendula limonene synthase/citrus limonene synthase

Investigator: Lara

Aim of the experiment: Extract plasmids (pYESnew and pBS1C3) that contain limonene synthase/citrus limonene synthase.

Miniprep with Qiagen Kit; Plasmids p116-p122. Restriction digest with Xba1 and Pst1.

Plasmid DNA concentrations:

p116: 285 ng/µl

p117: 337 ng/µl

p118: 520 ng/µl

p119: 370 ng/µl

p120: 320 ng/µl

p121: 320 ng/µl

p122: 335 ng/µl

Restriction digest of p116-p122

Investigator: Lara

Aim of the experiment: Analytical restriction digest of plasmids p116, p117, p118, p119, p120, p121, p122.

volume	reagent
2 µl	DNA
2 µl	Buffer 4
0,25 µl	Xba1
0,25 µl	Pst1-HF
15,3 µl	ddH2O

Incubation: 37 °C; 1,5 h

Restriction digest with Xba1 and Pst1-HF.

Analytical gel electrophoresis

Investigator: Lara

Aim of the experiment: Analytical gel electrophoresis of products from restriction digest of plasmids p116, p117, p118, p119, p120, p121, p122.

p116: PCR1/pYES

p117: PCR2/pYES

p118: PCR4/pYES

p119: PCR4/pSB1C3

p120: PCR5/pYES

p121: PCR6/pYES

p122: PCR7/pYES

Midiprep of pSB1C3 (RFC25-compatible)

Investigator:Mary

Aim of the experiment: Get a lot of pSB1C3 for further experiments

Midipreparation of the pellet from over night cultures (E.coli, Transformed with pSB1C3 - RFC25; name in registry: K365005)

was done with the Midiprep Kit from Qiagen

Result was named as P123 and had the concentration: 469,5 ng/µl (100µl at all)

PCR-Products of PAL (consless): digestion, extraction and ligation

investigator: Daniela, Mary

Aim of the experiment: digestion of PCR-Products to gain the correct cutting sites for ligation in pYES2 and pSB1C3 afterwards

Purification of PCR-Products with PCR-Purification Kit

digestion with Xba1 and HF-Age1 (both NEB)

volume	reagent
25µl	PCR-product
5µl	Buffer NEB4
0.5µl	BSA
1µl	Xba1 (NEB; 20u/µl)
1µl	HF-Age1 (NEB; 20u/µl)
17.5µl	bidest. sterile H2O

digestion took 3h at 37°C

extraction from preparative gel:

PCR of PAL+cons using the optimized primer annealing temperature of 47 °C

Investigator: Daniela

Aim of the experiment: Amplification of the PAL cons gene contained in P19.

PCR
Reaction batch

volume	reagent
5 µl	10x Pfu Ultra II buffer
2.5 µl	Plasmid P19 template
2.5 µl	1:10 dilution of O22 (10 pmol/µL)
2.5 µl	1:10 dilution of O59 (10 pmol/µL)
1.25 µl	dNTP mix
35 µl	ddH2O
1.25 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	29	95°C	30 sec
		47 °C	1 min
		68°C	3 min
3	1	68°C	5 min
4	1	4°C	infinity

PCR was succesful, band at 2,1kb:

Transformation of P94 - P97 (ligationproducts of pSB1C3 with CHS and OMT respectively) in E.coli

Investigator: Daniela

adding 5µl ligation product (P94-P97) in 100µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 45 min, 180 rpm
plate on agar with chloramphenicol over night

-> were succesfull: some colonies were grown

Tuesday, July 17th

Picking of ADH1-T colonies

Investigator: Georg

To 5 µl LB-Medium,5 µl of 1000x Amp were added
5 colonies from the plate with ADH1-P were picked
Each colony was transferred into 5 ml LB-Medium with Chloramphenicol
Incubation over night at 37°C in the 180rpm cell-culture shaker.

Picking of transformed E. coli containing biobrick BBa_K165055

Preparative digest of P123 (pSB1C3 RFC25)

Investigator: Mary, Daniela

Digestion of P123 with Xbal/PstI and XbaI/AgeI

volume	reagent
23.1 µl	ddH2O
4 µl	NEB4
0.4 µl	10x BSA
1 µl	XbaI (20 U/µl)
1.5 µl	PstI (10U/µl)
10 µl	P123

volume	reagent
23.35 µl	ddH2O
4 µl	NEB4
0.4 µl	10x BSA
1 µl	XbaI (20 U/µl)
1.25 µl	AgeI (10U/µl)
10 µl	P123

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

gel: 1% with LMP-agarose
band 1: P123 digested with XbaI and PstI
band 2: P123 digested with XbaI and AgeI
70 V, 90 min

Gelextration

cut the bands
QIAquick Gel Extractrion Kit was used
- step 6 was left out
- step 9: 30µl buffer, 4 min incubation

Products were names as follows:

P123 digested with XbaI and PstI: P132
P123 digested with XbaI and AgeI: P133

PCR-Products of PAL (with consensussequence): digestion and extraction

investigator: Daniela, Mary

Aim of the experiment: digestion of PCR-Products to gain the correct cutting sites for ligation in pYES2 and pSB1C3 afterwards

Purification of PCR-Products with PCR-Purification Kit

digestion with Xba1 and HF-Age1 (both NEB)

volume	reagent
25µl	PCR-product
5µl	Buffer NEB4
0.5µl	BSA
1µl	Xba1 (NEB; 20u/µl)
1µl	HF-Age1 (NEB; 20u/µl)
17.5µl	bidest. sterile H2O

digestion took 3h at 37°C

extraction from preparative gel:

Picking Clones of CHS and OMT in pSB1C3-RFC25

investigator: Daniela, Mary

Aim of the experiment: preculture over night for the miniprep next day

Repetition of ligation of PCR 15-20 (4CL, CHS and OMT) with pYES (P71 and P72 respectively)

Investigator: Mary, Daniela

Concentration (Nano Drop:
4CL+ (PCR 15) = 40.3 ng/µl
4CL- (PCR 16) = 37.3 ng/µl
CHS+ (PCR 17) = 46.1 ng/µl
CHS- (PCR 18) = 51.2 ng/µl
OMT+ (PCR 19) = 22.3 ng/µl
OMT- (PCR 20) = 16.7 ng/µl

P50 digested with XbaI and PstI = 23.9 ng/µl (the digested Plasmid has the number P71)
P50 digested with XbaI and NgOMIV = 28.4 ng/µl (the digested Plasmid has the number P72)

required volumes were calculated using Lab Tools

4CL+ (PCR 15) with P71

volume	reagent
5.27 µl	P71
2.73 µl	4CL+ (PCR 15)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

4CL- (PCR 16) with P71

volume	reagent
5.13 µl	P71
2.87 µl	4CL- (PCR 16)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

CHS+ (PCR 17) with P72

volume	reagent
5.84 µl	P72
2.16 µl	CHS+ (PCR 17)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

CHS- (PCR 18) with P72

volume	reagent
6 µl	P72
2 µl	CHS- (PCR 18)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

OMT+ (PCR 19) with P72

volume	reagent
4.45 µl	P72
3.55 µl	OMT+ (PCR 19)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

OMT- (PCR 20) with P72

volume	reagent
3.87 µl	P72
4,13 µl	OMT- (PCR 20)
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

Negative control

volume	reagent
5 µl	P71 or P72
3 µl	ddH2O
1 µl	T4 DNA-ligase
1 µl	T4-ligase buffer (10x)

water bath 16 °C

Transformation of ligationproducts of 4CL, OMT and CHS respectively in pYES in E.coli

Investigator: Mary,Daniela

adding 5µl ligation product in 100µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 45 min, 180 rpm
plate on agar with ampicillin over night

results:

CHS+ in pYES (P72) 100 µl: 7 clones
CHS- in pYES (P72) 100 µl: 9 clones
CHS+ in pYES (P72) Pellet: 111 clones
CHS- in pYES (P72) Pellet: 77 clones

4CL+ in pYES (P71) 100 µl: 9 clones
4CL- in pYES (P71) 100 µl: 3 clones
4CL+ in pYES (P71) Pellet: 47 clones
4CL- in pYES (P71) Pellet: 45 clones

OMT+ in pYES (P72) 100 µl: 7 clones
OMT- in pYES (P72) 100 µl: 5 clones
OMT+ in pYES (P72) Pellet: 30 clones
OMT- in pYES (P72) Pellet: 53 clones

negative control P71 100 µl: 14
negative control P71 Pellet: 71
negative control P72 100 µl: 7
negative control P72 Pellet: 64

Inoculation of YPD medium with S. cerevisiae and brewing yeast strain 34/70 (part 1/3)

investigator: Maddin, Aloisius

Aim of the experiment: Discrimination of growing ability in wort medium

4 different worts:

21%, without hop
21%, without hop, autoclaved
16%, with hop
16%, with hop, autoclaved

were diluted with ELGA to a solution of 12%. These 4 different worts were inoculated with 5ml of preparatory culture of S. cerevisiae and 1ml of brewing yeast strain 34/70 (provided by the Forschungsbrauerei, Weihenstephan). Start OD was measured at 550nm (for table see next experiment). Those 8 flasks were incubated over night at room temperature and 130 rpm.

Wednesday, July 18th

Extraction of Plasmid-DNA

Investigator: Georg

ADH1-T Plasmids were extracted according to protocoll of Quiaprep genextraction protocoll

Analytical digestion of ADH1-T and gelelectrophoresis

Investigator: Georg

Reaction batch for digestion:

volume	reagent
1,25 µl	PstI-HF (NEB)
1,25 µl	XbaI (NEB)
5 µl	NEB-4 buffer
0,5 µl	100 x BSA (NEB)
79,5 µl	dd H20
= 87,5µl	TOTAL

17,5 µl Mastermix were added to 2,5 µl plasid DNA

They have sent the wrong insert

Ligation of plasmid pSB1C3 containing 20aaLinker with LexA and plasmid containing Gal4AD with Pif3 for fusion protein construction

Miniprep of overnight culture from picked transformed E. coli containing biobrick BBa_K165055

Inoculation of YPD medium with S. cerevisiae and brewing yeast strain 34/70 (part 2/3)

Investigators: Martin, Alois

Aim of the experiment: Discrimination of growing ability in wort medium.

After 12h of cultivating the optical density (OD) at 550nm was determined:

Assay	Yeast	Autoclaved	Hop	OD 0h	OD 12h	delta OD
A1	S. cerevisae	No	No	1.2	2.2	+ 1.0
A2	S. cerevisae	Yes	No	2.0	2.6	+ 0.6
A3	S. cerevisae	No	Yes	1.8	2.4	+ 0.6
A4	S. cerevisae	Yes	Yes	2.4	2.7	+ 0.3
B1	34/70	No	No	1.6	2.5	+ 0.9
B2	34/70	Yes	No	3.0	2.9	- 0.1
B3	34/70	No	Yes	2.2	2.5	+ 0.3
B4	34/70	Yes	Yes	2.7	2.8	+ 0.1

After 12h of cultivating the S. cerevisiae is growing quite well. There is a tendency that the brewing yeast strain 34/70 is not capable to grow sufficiently in autoclaved (e.g. proteinfree) medium. Since the 34/70 was stored at 4°C over 5 days, directly used to inoculate the medium (no preparatory culture) and we only used 1ml to inoculate with (compared to 5ml of the preparatory culture of S. cerevisiae - because of obvious differences in opacity of the inoculation media) there is not yet a conclusion to be drawn. We decided to incubate for another 24h at least.

new Miniprep of P50 pYES2

Investigators: Andrea

NanoDrop concentration: 303.6 ng/µl (260/280: 1.89)

Transformation of P50 (pYes) in E.coli

Investigator: Katrin

Aim of the experiment: Get more P50(pYes) for further experiments

adding 2-3 µl of plasmid P50 in 100µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (withouth antibiotica) and incubate at 37°C, 30 min, 180 rpm
plate on agar with Ampicillin over night

Ligation of 4CL and PAL in pSB1C3-RFC25 and ligation of PAL in pYES

Investigator: Katrin, Daniela

Concentration (Nano Drop:
4CL+ (PCR 15) = 40.3 ng/µl
4CL- (PCR 16) = 37.3 ng/µl
PAL+ (PCR 32) = 25 ng/µl
PAL- (PCR 33) = 16.8 ng/µl

P132 (pSB1C3-RFC25 digested with Xbal and Pstl) = 33.5 ng/µl
P133 (pSB1C3-RFC25 digested with Xbal and AgeI) = 41.8 ng/µl

required volumes were calculated using Lab Tools

4CL+ (PCR 15) with P132 (pSB1C3-RFC25)

volume	reagent
2.64 µl	P132
5.36 µl	4CL+ (PCR 15)
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
9 µl	ddH2O

4CL- (PCR 16) with P132 (pSB1C3-RFC25)

volume	reagent
2.51 µl	P132
5.49 µl	4CL- (PCR 16)
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
9 µl	ddH2O

PAL+ (PCR 32) with P133 (pSB1C3-RFC25)

volume	reagent
1.29 µl	P133
6.71 µl	PAL+ (PCR 32)
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
9 µl	ddH2O

PAL- (PCR 33) with P133 (pSB1C3-RFC25)

volume	reagent
0.91 µl	P133
7.09 µl	PAL- (PCR 33)
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
9 µl	ddH2O

PAL+ (PCR 32) with P72 (pYES)

volume	reagent
3.55 µl	P72
4.45 µl	PAL+ (PCR 32)
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
9 µl	ddH2O

PAL- (PCR 33) with P72 (pYES)

volume	reagent
2.79 µl	P72
5.21 µl	PAL- (PCR 33)
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
9 µl	ddH2O

Negative control:

volume	reagent
5 µl	P72, P132 or P133
12 µl	ddH2O
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)

water bath 16 °C

Miniprep of CHS and OMT in pSB1C3-RFC25

Investigator: Daniela

Aim of the experiment: Extract plasmids (pSB1C3-RFC25) that contain CHS and OMT

QIAprepS Spin Miniprep Kit

step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

the Minipreps were named as follows:

P135: CHS+ in pSB1C3-RFC25 (c = 150.9 ng/µl)
P136: CHS- in pSB1C3-RFC25 (c = 204 ng/µl)
P137: OMT+ in pSB1C3-RFC25 (c = 179.3 ng/µl)
P138: OMT- in pSB1C3-RFC25 (c = 146.7 ng/µl)

Control digest of CHS and OMT in pSB1C3-RFC25

Investigator: Katrin, Daniela

Aim of the experiment: Test whether the ligation of CHS and OMT in pSB1C3 was successful

volume	reagent
2.5 µl	P135 / P136 / P137 / P138
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
0.2 µl	BSA (100x)
14.8 µl	ddH2O

pSB1C3: 2070 bp
CHS: 1173 bp
OMT: 1059 bp

It seems as if the ligation was successful. However it is strange that the band of OMT is lower that the one of CHS. we had the wrong information about the length of OMT -> the right length of OMT is 1059 bp, so everything is fine :)

Picking clones of 4CL, CHS and OMT in pYES

investigator: Katrin, Daniela

Aim of the experiment: preculture over night for the miniprep next day

Thursday, July 19th

Transformation of P124+PCR29 and P126+PCR31

Investigator: Daniela

Aim of the experiment: Transformation of the ligation of P124+PCR29 and P126+PCR31 overnight, to see if ligation has been successful.

Operational sequence:

P124+PCR29 ->Chlp
negative control: NK1 ->Chlp
P126+PCR31 ->Amp
negative control: NK2 ->Amp

adding 5µl ligation product in 100 µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min for ampicillin and 45 min for chloramphenicol, 180 rpm
plate on agar with ampicillin or chloramphenicol over night

EDIT from 20.07.2012: Unfortunately, no colonies for P124+PCR29 can be identified but colonies on from the concentrated pellet of P126+PCR31 ligation, BUT more but very small colonies on the control plate from the pellet. For further identification the colonies of the ligation has been picked on 21.07.2012 for miniprep and analytical digestion and gelelectrophoresis.

Restriction digest of P79

Investigator: Roman

Aim of the experiment: Double digest of p79 with Xba1 and Age1 to prepair it for ligation with an N- terminal nuclear localization signal sequence

40 µl composition

18 µl plasmid DNA
1 µl Age1
1 µl Xba1
4 µl NEBuffer 4 (10x)
15,6 µl ddH2O
0,4 µl BSA (100x)

The mixture was incubated over night at 37 °C

Oligohybridization of single-stranded DNA for creating SV40 nuclear localization signal for fusion proteins for translocating them into the nucleus

Investigator: Jeff

Aim of the experiment: Oligohybridization of single-stranded DNA (TUM12-SV40-fw and TUM12-SV40-rv)for creating SV40 nuclear localization signal for fusion proteins for translocating them into the nucleus

Operational sequence:

25 µL of 100 pM of TUM12-SV40-fw and 25 µL of 100 pM TUM12-SV40-rv in one ERG

Heating up to 95 °C for 30 min

Cooling at RT in a styropor box overnight.

Inoculation of YPD medium with S. cerevisiae and brewing yeast strain 34/70 (part 3/3)

Investigators: Andrea, (Martin, Alois)

Aim of the experiment: Discrimination of growing ability in wort medium.

After 40h of cultivating the optical density (OD) at 550nm was determined:

Assay	Yeast	Autoclaved	Hop	OD 0h	OD 12h	OD 40h	delta OD
A1	S. cerevisae	No	No	1.2	2.2	2.5	+ 1.3
A2	S. cerevisae	Yes	No	2.0	2.6	2.7	+ 0.7
A3	S. cerevisae	No	Yes	1.8	2.4	2.6	+ 0.8
A4	S. cerevisae	Yes	Yes	2.4	2.7	2.8	+ 0.4
B1	34/70	No	No	1.6	2.5	2.8	+ 1.2
B2	34/70	Yes	No	3.0	2.9	3.0	0
B3	34/70	No	Yes	2.2	2.5	2.8	+ 0.6
B4	34/70	Yes	Yes	2.7	2.8	2.9	+ 0.2

After 40h of cultivating the S. cerevisiae is growing comparably to the brewing yeast strain, though we seem to have entered a phase of substrate limitation. Autoclaved media lack solved protein and is thus for neither of the yeasts a satisfying medium; added hop also represses their growth (S. cerevisiae shows a higher susceptability - which seems logic, since the brewing yeast is selected to survive and prosper in beer brewing environment).

The next step would be to brew with our "laboratory strain" S. cerevisiae.

Preparative digest of PCR1 and PCR2 and P50 and P123

Investigator: Andrea

Digestion of PCR1 and PCR2 with XbaI and AgeI

volume	reagent
10 µl	PCR-Product
2 µl	NEB Buffer
0.2 µl	BSA
1 µl	XbaI (10 U/µl)
1 µl	AgeI (10 U/µl)
7 µl	ddH2O

Digestion of P50 with XbaI and NgoMIV

volume	reagent
10 µl	P50
4 µl	NEB Buffer
0.4 µl	BSA
1 µl	XbaI (10 U/µl)
2 µl	NgoMIV (10 U/µl)
22.6 µl	ddH2O

Digestion of P123 with XbaI and AgeI

volume	reagent
20 µl	P123
4 µl	NEB Buffer
0.4 µl	BSA
1 µl	XbaI (10 U/µl)
1 µl	AgeI (10 U/µl)
14 µl	ddH2O

Incubation: 37 °C, 3 h

Preparative gel

Investigator: Andrea

40 µl pSB1C3 + 4 µl loading dye
40 µl pYES2 + 4 µl loading dye
20 µl PCR1 + 2 µl loading dye

Limonensynthase: 1600 bp
pYES2: 5800 bp
pSB1C3: 2000bp

Ligation of digested PCR1 (digested with XbaI and AgeI) with pSB1C3 (digested with XbaI and AgeI)

Investigator: Andrea

Concentration (Nano Drop:
LIMS Citrus (PCR 1) = 18.6 ng/µl
P50 (digested with XbaI and NgoMIV) = 24.9 ng/µl
P123 (digested with XbaI and AgeI) = 44.5 ng/µl

PCR1 with P123 digested with XbaI and AgeI/NgoMIV

volume	reagent
1.19µl	P123
6.81 µl	PCR 1
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

water bath 16 °C over night

Miniprep of 4CL, CHS and OMT in pYES (P71 and P72)

Investigator: Daniela

Aim of the experiment: Extract plasmids (pYES) that contain 4CL, CHS and OMT

The day before 2 clones were picked for each enzyme.

QIAprepS Spin Miniprep Kit

step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

Concentration:

4CL+ in pYES clone 1: c = 172.5 ng/µl
4CL- in pYES clone 1: c = 192.1 ng/µl
CHS+ in pYES clone 1: c = 136.6 ng/µl
CHS- in pYES clone 1: c = 85.7 ng/µl
OMT+ in pYES clone 1: c = 116.0 ng/µl
OMT- in pYES clone 1: c = 129.7 ng/µl

4CL+ in pYES clone 2: c = 160.0 ng/µl
4CL- in pYES clone 2: c = 144.5 ng/µl
CHS+ in pYES clone 2: c = 128.5 ng/µl
CHS- in pYES clone 2: c = 116.2 ng/µl
OMT+ in pYES clone 2: c = 142.8 ng/µl
OMT- in pYES clone 2: c = 134.5 ng/µl

Control digest of 4CL, CHS and OMT in pYES

Investigator: Daniela

Aim of the experiment: Test whether the ligation of 4CL, CHS and OMT in pYES was successful

volume	reagent
2.5 µl	4CL+ in pYES clone 1 / 4CL- in pYES clone 1
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
0.2 µl	BSA (100x)
14.8 µl	ddH2O

volume	reagent
3 µl	4CL+ in pYES clone 2
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
0.2 µl	BSA (100x)
14.3 µl	ddH2O

volume	reagent
3.5 µl	4CL- in pYES clone 2
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
0.2 µl	BSA (100x)
13.8 µl	ddH2O

volume	reagent
3.5 µl	CHS+ in pYES clone 1 / OMT+ in pYES clone 1 / OMT- in pYES clone 1 / CHS+ in pYES clone 2 / OMT+ in pYES clone 2 / OMT- in pYES clone 2
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
0.2 µl	BSA (100x)
13.8 µl	ddH2O

volume	reagent
4 µl	CHS- in pYES clone 2
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI(20U/µl)
2 µl	NEB4 (10x)
0.2 µl	BSA (100x)
13.3 µl	ddH2O

volume	reagent
5 µl	CHS- in pYES clone 1
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI(20U/µl)
2 µl	NEB4 (10x)
0.2 µl	BSA (100x)
12.3 µl	ddH2O

expected bands:

pYES: about 5800bp
4CL: 1685bp
CHS: 1173bp
OMT: 1222bp

Transformation of ligationsproducts of 4CL and PAL in pSB1C3-RFC25 and of PAL in pYES in E.coli (see July, 18th)

Investigator: Daniela

4CL+ (PCR15) in pSB1C3-RFC25 (P132) ->Chlp
4CL- (PCR16) in pSB1C3-RFC25 (P132) ->Chlp
PAL+ (PCR32) in pSB1C3-RFC25 (P133) ->Chlp
PAL- (PCR33) in pSB1C3-RFC25 (P133) ->Chlp
PAL+ (PCR32) in pYES(P72) ->Amp
PAL- (PCR33) in pYES(P72) ->Amp
negative control: P72 ->Amp
negative control: P132 ->Chlp
negative control: P133 ->Chlp

adding 5µl ligation product in 100 µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min for ampicillin and 45 min for chloramphenicol, 180 rpm
plate on agar with ampicillin or chloramphenicol over night

Friday, July 20th

Preparative Digestion of PGK1-P, TEF2-T, TEF1-P and gelelectrophoresis

Investigator: Georg

Reaction batch for digestion:

volume	reagent
3,3 µl	PstI-HF (NEB)
3,3 µl	XbaI (NEB)
13,2µl	NEB-4 buffer
1,32 µl	100 x BSA (NEB)
44,88 µl	dd H20
=72µl	TOTAL

20 µl preparative mastermix were mixed with 20 µl of plasmid-DNA
Preparative gelelectrophoresis was processed for 90 min at 70 V

Gel purification of Xba1/ Age1 digested P79

Investigator: Roman

Aim of the Experiment: Aim of the experiment is the purification of the double digested vector p79 (pSB1C3_RFC25_Linker), in which the N- terminal SS is to be cloned.

Operational sequence:

The mixture was seperated by gel electrophoresis (LMP agarose)
The DNA was cut out of the gel (2 pieces) and weight ==> 200 mg each piece.
Afterwards the plasmid DNA was extracted as described in the Quiagen Gel Purification protocol.Elution was performed in two steps (à 25 µl) with elution buffer (heated up to 40°). To improve the yeald of plasmid DNA during the elution, the column was incubated at RT for about 4 minutes before centrifugation

Miniprep of transformed E. coli XL1-Blue with pYES2 new from P50 tube (4x), BBa_K365005 (4x), BBa_K207000 (1x)and BBa_K207001 (1x)

Investigator: Jeff

Aim of the study:: Miniprep

Operational sequence:

Miniprep has been performed after manufacturer's protocol. QIAGEN - QIAprep Spin Miniprep Kit.

Analytical digestion and gelelectrophoresis of P152, P155, P156, P157, P158, P159, P160, P161

Investigator: Jeff

Aim of the study: Analytical digestion and gelelectrophoresis of P152, P155, P156, P157, P158, P159, P160, P161, to prove the insert and backbone size.

Operational sequence:

Analytical digestion and gelelectrophoresis were performed after lab's standard protocol.

Digestion with XbaI and PstI-HF in Buffer 4.

Picking from the overnight transformation of the ligated P126+PCR31

Investigator: Jeff

Aim of the study: Picking from the overnight transformation of the ligated P126+PCR31, to see whether ligation is successful or not.

Operational sequence:

Picking and overnight culture after standard laboratory's protocol. (AmpR LB-medium)

PCR of P23 (LexA, BBa_K105005) to indroduce RFC25 pre- and suffix because last ligation was not successful

Investigator: Jeff

Aim of the experiment: Last ligation with LexA was not successful and the tube with the PCR product was empty from the ligation, so one has to do another PCR for another ligation.

Operational sequence:

Clone 3 (tube P23) of BBa_K105005 (LexA) has beed choosen for the PCR.

PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer
1 µl	10 µM Reverse Primer
0.25 µL	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl	Plasmid DNA (BBa_K105005) from P23 (Clone 3)
35.75 µL	ELGA Water
=50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	55 °C	60 s
	68 °C	60 s
Final extension	68 °C	5 min
Hold	4 °C	overnight

Freezed at -20 °C. Stil has to be purified with PCR purification kit on the next day

Control digest of pYES (P153 and P154)

Investigator: Mary, Ingmar, Daniela

Aim of the experiment: Test whether the vector pYES is right.

volume	reagent
1.5 µl	P153
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
16.25 µl	ddH2O

volume	reagent
1.5 µl	P153
0.25 µl	Xbal (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
14.25 µl	ddH2O

volume	reagent
1.5 µl	P153
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
14 µl	ddH2O

volume	reagent
1.5 µl	P153
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
14 µl	ddH2O

volume	reagent
1.5 µl	P153
0.25 µl	NgoMIV (10U/µl)
2 µl	NEB4 (10x)
16.25 µl	ddH2O

volume	reagent
1.5 µl	P153
0.25 µl	NgoMIV (10U/µl)
0.25 µl	PstI (20U/µl)
0.25 µl	SpeI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
13.75 µl	ddH2O

volume	reagent
2.8 µl	P154
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
14.95 µl	ddH2O

volume	reagent
2.8 µl	P154
0.25 µl	Xbal (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
12.95 µl	ddH2O

volume	reagent
2.8 µl	P154
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
12.7 µl	ddH2O

volume	reagent
2.8 µl	P154
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
12.7 µl	ddH2O

volume	reagent
2.8 µl	P154
0.25 µl	NgoMIV (10U/µl)
2 µl	NEB4 (10x)
14.95 µl	ddH2O

volume	reagent
2.8 µl	P154
0.25 µl	NgoMIV (10U/µl)
0.25 µl	PstI (20U/µl)
0.25 µl	SpeI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
12.45 µl	ddH2O

P153

P154

The vector seems to be correct. However NgoMIV did not digest the plasmid properly.

Saturday, July 21st

Miniprep of transformed E. coli XL1-Blue with ligation product of P126+PCR31

Investigator: Jeff

Aim of the study: Miniprep

Operational sequence:

Miniprep has been performed after manufacturer's protocol. QIAGEN - QIAprep Spin Miniprep Kit.

Analytical digestion and gelelectrophoresis of the minipreps of transformed E. coli XL1-Blue with ligation product of P126+PCR31

Investigator: Jeff

Aim of the experiment: To see whether ligation ist successful.

Reaction batch for each plasmid:

Reagent	Volume in µl
Tango Buffer 10x	4 µl
NdeI (Fermentas)	0.5 µl
BamHI (Fermentas)	0.5 µl
Plasmid DNA	2.5 µl
ddH2O	12.5 µl
TOTAL	20 µl

Incubation at 37 °C for 1 h 30 min.

Analytical gelelectrophoresis at 90 V for 1 h.

Order of gel-pockets:

100 bp ladder	P172	P173	P174	1000 bp ladder
	corrupt	corrupt	corrupt

Ligation was not successful!

PCR purification of PCR products from P23

Investigator: Jeff

Aim of the experiment Purification of PCR products from P23.

Operational sequence:

The 4 tubes with PCR products of P23 were purificated with the PCR purification kit from Qiagen after manufacturer'S protocol.

Sunday, July 22nd

Preparative digest of pYes2 RFC 25 and ligation with PCR products PCR 15 - 20 and 32+33

Investigator: Ingmar

Aim of the experiment: Intsert the genes of PAL, 4CL, CHS and OMT in pYEs2 RFC 25 in order to test their expression in yeast.

Preparative digest of P 154 with XbaI and NgoMIV and of P 153 with XbaI and PstI

volume	reagent
7 µl	ddH2O
2.5 µl	NEB 4 buffer
2.5 µl	Tango buffer
4 µl	XbaI (10 U/µl)
4 µl	NgoMIV (10 U/µl)
30 µl	P 153

volume	reagent
10 µl	ddH2O
4 µl	Tango buffer
2 µl	XbaI (10 U/µl)
4 µl	PstI (10 U/µl)
20 µl	P 154

Incubation: 37 °C, 3 h

DNA preparative gel electrophoresis

gel: 1% with LMP-agarose
Each digest product was mixed with an adequate volume of DNA loading buffer and loaded into the gel
The separation process lasted 90 min at 70 V.

Gel picture of control digest with PstI

All digest products show the expected bonds at 5849 bp (digest with XbaI and NgoMIV) and 5785 bp (digest with XbaI and PstI) respectively.

Gelextration

cut the bands
QIAquick Gel Extractrion Kit was used
- step 6 was left out
- step 9: 30µl buffer, 4 min incubation

Products were named as follows:

P154 digested with XbaI and NgoMIV: P175
P153 digested with XbaI and PstI: P176

Ligation

PCR product	Volume	Vector	Volume	Volume T4 DNA Ligase	Volume T4 DNA Ligase buffer	Volume ddH20	New Plasimd Number
PCR15	5.25	P 176	2.75	1 µl	2 µl	9 µl	P 177
PCR16	5.25	P 176	2.75	1 µl	2 µl	9 µl	P 178
PCR 17	7.2	P 175	0.8	1 µl	2 µl	9 µl	P 179
PCR 18	7.2	P 175	0.8	1 µl	2 µl	9 µl	P 180
PCR 19	7.1	P 175	0.9	1 µl	2 µl	9 µl	P 181
PCR 20	7.1	P 175	0.9	1 µl	2 µl	9 µl	P 182
PCR 32	7.25	P 175	0.75	1 µl	2 µl	9 µl	P 183
PCR 33	7.5	P 175	0.5	1 µl	2 µl	9 µl	P 184

Week 7

Limonene (7 Experiments):

Coumaryl (18 Experiments):

Constitutive Promoter (2 Experiments):

Light Switchable Promoter (15 Experiments):

Show Details ...

Monday, July 23rd

Miniprep of PAL, 4CL in pSB1C3 and PAL in pYES

Investigator: Mary

Aim of the experiment: Extract plasmids (pYES and pSB1C3-RFC25) that contain 4CL and PAL´

The day before one clone were picked for each enzyme from plates from 19th July 2012.

QIAprepS Spin Miniprep Kit

step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

Concentration:

4CL+ (PCR15) in pSB1C3-RF25 (P132): c = 340 ng/µl -> new name of Ligationproduct after Miniprep: P185
4CL- (PCR16) in pSB1C3-RF25 (P132): c = 385 ng/µl -> new name of Ligationproduct after Miniprep: P186
PAL+ (PCR32) in pSB1C3-RF25 (P133): c = 395 ng/µl -> new name of Ligationproduct after Miniprep: P187
PAL- (PCR33) in pSB1C3-RF25 (P133): c = 255 ng/µl -> new name of Ligationproduct after Miniprep: P188

PAL+ (PCR32) in pYES (P72): c = 190 ng/µl
PAL- (PCR33) in pYES (P72): c = 238 ng/µl

Control digest of 4CL, PAL in pSB1C3-RFC25 and PAL in pYES

Investigator: Mary

Aim of the experiment: Test whether the ligation of 4CL, PAL in pSB1C3-RFC25 and PAL in pYES was successful

Plasmids are taken from miniprep from 23.07.2012

volume	reagent
2.5 µl	4CL+ in pSB1C3-RFC25 / 4CL- in pSB1C3-RFC25
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

volume	reagent
2.5 µl	PAL+ in pSB1C3-RFC25 / PAL- in pSB1C3-RFC25
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

volume	reagent
2.5 µl	PAL+ in pSB1C3-RFC25 / PAL- in pSB1C3-RFC25
0.25 µl	Xbal (20U/µl)
0.25 µl	AgeI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

expected bands:

pYES: about 5800bp
pSB1C3-RFC25: 2070bp
4CL: 1685bp
PAL: 2151bp

Ligation of PAL+/- in pYES was not succesful Ligation of PAL+/- and 4CL+/- in pSB1C3-RFC25 were succesful! (pSB1C3 is overlapping with PAL)

APT Solubilisation and Transformation

Investigator: Mary

Aim of the experiment: solubilisation of the synthetic gene of APT and transformation of sent plasmid (including APT) in E.coli to copy it if necessary

short zentrifugation of sent product and adding 50µl bidest. H2O to it (5µg in 50µl = concentration of 0.1 µg/µl) the dissolved product was named as G1 (as Geneproduct number 1) and stored at -20°C

2µl of solved product used for transformation in Ecoli (Kit of Quiagen) and Amp-resistance (said GeneArt) Plating cells on Agar with Amp, 37°C over night

Preparative digest of APT

Investigator: Mary

Aim of the experiment: Extraction of the sequence of APT out of the sent plasmid.

volume	reagent
10µl	ddH2O
4 µl	NEB 4 buffer
4 µl	BSA (10x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI (20 U/µl)
20 µl	solubilised APT-product (see Solubilisation APT)

Incubation: 37°C, 2.5h

Bond at 1244bp as expected:

The bond was cutted out of the gel and stored at -20°C (P189)

Transformation of ligationsproducts of 4CL, CHS, OMT and PAL in pYES in E.Coli (Ligation see 22th of July)

Investigator: Mary

Aim of the experiment: ligation of enzymes in pYES to transform it into yeast if this was successful.

4CL+ (PCR15) in pYES (P176) -> new name: P177
4CL- (PCR16) in pYES (P176) -> new name: P178
CHS+ (PCR17) in pYES (P175) -> new name: P179
CHS- (PCR18) in pYES (P175) -> new name: P180
OMT+ (PCR19) in pYES (P175) -> new name: P181
OMT- (PCR20) in pYES (P175) -> new name: P182
PAL+ (PCR32) in pYES (P175) -> new name: P183
PAL- (PCR33) in pYES (P175) -> new name: P184

adding 5µl ligation product in 100 µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 30 min 180 rpm
plate on agar with ampicillin and incubate over night at 37°C

Gel- purification of hybridized oligos: SV40 SS (Tube PCR34)

Investigator: Roman Aim of the experiment: Purification of the hybridized oligos in order to make them ready for ligation in pSB1C3 Operational Sequence:

oligos were seperated by gel electrophoresis (LMP agarose)
picture:

afterwards the DNA was cut out and extracted with the Quiagen Gel- purification kit as described in the manufacturer's protocol. Elution was performed in two steps á 25 µl elution buffer. DNA was collected in one tube, which was annotated with PCR34 purif.
determined concentration (NanoDrop): ca. 385 ng/µl

Tuesday, July 24nd

GElextraction of preparative digested ADH1-P, CYC1-T, TEF2-P, TEF1-P,PGK1-P

Investigator: Georg

Plasmid-DNA was extracted according to Quiaquick gel extraction kit

Nanodrop

Investigator: Georg

P128: 28,3 ng/µl
P129: 21 ng/µl
P130: 4,2 ng/µl
P131: 4,7 ng/µl
P168: 3,5 ng/µl
P169: 4,2 ng/µl

Gelextraction of APT digested with Xbal and AgeI (P189)

Investigator: Daniela

Gelextration

QIAquick Gel Extractrion Kit was used
the product was named P189
concentration: c = 9.1 ng/µl

Ligation of APT (P189) in pSB1C3-RFC25 (P133)

Investigator: Daniela

APT (P189) in pSB1C3-RFC25 (P133)

volume	reagent
0.86 µl	P133
7.14 µl	APT (P189)
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
9 µl	ddH2O

Negative control:

volume	reagent
0.86 µl	P133
16.14 µl	ddH2O
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)

water bath 16 °C

NanoDrop determination of PCR34- PCR38

Investigator:Roman

Aim: Determination of the concentration of the samples previously to the ligation

Determined values:

PCR Product	Concentration in ng/µl
PCR34	385 (hybridized oligos)
PCR35	41,2
PCR36	39,5
PCR37	41,9
PCR38	57,4

PCR38 will be used in following restriction digest

Restriction digest of p123 and PCR38 with NgoMIV and Pst1

Investigator: Roman Aim of the experiment: To prepare samples of p123 (pSB1C3 RFC25) and PCR38 for a following ligation Operational sequence: p123 was digested in a 40 µl preparation (miniprep product):

Substance	Volume
Plasmid- DNA	20 µl
Enzyme NgoMIV	2 µl
Enzyme Pst1	2 µl
Buffer 4	4 µl
ddH2O	12 µl

PCR38 was digested in a 50 µl preparation (PCR product)

Substance	Volume
Purified PCR product	25
Enzyme NgoMIV	2 µl
Enzyme Pst1	2 µl
Buffer 4	5 µl
ddH2O	16 µl

The preparations were incubated at 37°C for 3h and then stored at -20°C in box The tubes were annotated with "p123_doubledigest_NgoMIV+Pst1_unpurified_20120724" and "PCR38_doubledigest_NgoMIV+Pst1_unpurified_20120724" Afterwards, the samples were load on a 1% universal agarose gel and separated at 100 V for ca. 45 min. Corresponding gel- bands were cut out and stored at -20°C over night until extraction.

Ligation of p151 and PCR34

Investigator: Roman

Aim: Ligation of fragments previously to a transformation

Operational Sequence: Length of fragments:

p151: 2070 bp; c = 9,5 ng/µl
PCR34: 67 bp; c = 385 ng/µl

20 µl preparation:

Substance	Volume
p151- DNA	11 µl
PCR34- DNA	3 µl (out of a 1/100 dilution)
Ligase	0,5
T4 Ligase Buffer	2 µl
ddH2O	3,5 µl

Negative controls were prepared the same way, using 3 µl of ddH2O instead of PCR34- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath). Afterwards, the samples were stored at 4°C until the transformation.

Ligation of p126 and PCR31

Investigator: Roman

Aim:Ligation of fragments previously to a transformation

Operational Sequence: Length of fragments:

p126: 7961 bp; c = 46 ng/µl
PCR34: 306 bp; c = 11,3 ng/µl

10 µl preparation:

Substance	Volume
p126- DNA	2 µl
PCR31- DNA	1 µl
Ligase	0,5
T4 Ligase Buffer	1 µl
ddH2O	5,5 µl

Negative controls were prepared the same way, using 1 µl of ddH2O instead of PCR31- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath).

Ligation of p175 with "PCR1, 19.7.2012" and p144

Investigator: Roman

Aim: Ligation of fragments previously to a transformation

Operational Sequence: Length of fragments:

p175: 5900 bp; c = 107,3 ng/µl
PCR1: 1680 bp; c = 18 ng/µl
p144: ??? bp; c = ???

10 µl preparation:

Substance	Volume
p175- DNA	1 µl
PCR1/ p144- DNA	3 µl
Ligase	0,5
T4 Ligase Buffer	1 µl
ddH2O	4,5 µl

Note: This preparation was not made optimal, due to use of a wrong fragment lengths (PCR1 and p144, respectively) during the calculation of the volumes. Negative controls were prepared the same way, using 3 µl of ddH2O instead of PCR fragment. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath).

Preparation of yeast SCU Minimal Medium for Plates

Investigator: Katrin, Daniela

The recipe was taken from the pYES2 manual.
The ingredients were dissolved in 900 ml dest. water (ELGA) corresponding to the recipe. Lysine was only available as lysine-dihydrochloride, therefore 0.149 g instead of 0.1 g were used. Uracil was omited.
The medium was divided in 2 x 450 ml. One will later be used as the induction medium through the addition of galactose the other one will be used as the non-induction medium (addition of glucose). Sugar solutions will be added after autoclaving to prevent maillard-reaction.
10 g agar and a magnetic stir bar were added to each preparation
Autoclaving.
Glucose solution: 10 g glucose were dissolved in 50 ml ELGA.
Galactose solution: 10 g galactose were dissolved in 50 ml ELGA.
No raffinose will be used.
Autoclaving

Transformation of APT in pSB1C3-RFC25 (P190)

Investigator: Daniela

APT (P189) in pSB1C3 (P133) -> new name: P190
Negative control P133

adding 5µl ligation product in 100 µl competent XL blue E.coli cells
incubation 30 min on ice
5 min at 37°C
adding cells in 1 ml LB (without antibiotica) and incubate at 37°C, 45 min 180 rpm
plate on agar with chloramphenicol and incubate over night at 37°C

Picking Clones of 4CL, CHS, OMT and PAL in pYES and APT in original plasmid

investigator: Daniela

Aim of the experiment: preculture over night for the miniprep next day

Wednesday, July 25th

Restriction digest of p123 with Xba1 and Age1

Investigator: Roman

Aim of the experiment: Aim of the experiment is the preparation of the vector pSB1C3 RFC25 (p123) for a ligation with the PCR fragment PCR34 (as repetition for the ligation of p151 with PCR34, which has probably not worked, due to low vector concentration.

Operational sequence: 30 µl preparation for restriction digest of p123

Substance	Volume
p123- DNA	10 µl (results in ca. 5µg DNA)
Xba1- RE	1 µl
Age1- RE	1 µl
NEBuffer 4	3 µl
ddH2O	15 µl

The preparation was incubated at 37°C for 3,5 h. Afterwards the fragments were purificated by means of a preparative gel electrophoresis (see below).

Restriction digest of p123 with Age1 and Pst1

Investigator: Roman

Aim of the experiment: Aim of the experiment is the preparation of the pSB1C3- Vector (p123) for a ligation with PCR38 (which has been digested with NgoMIV and Pst1).

Operational sequence: 30 µl preparation for restriction digest of p123

Substance	Volume
p123- DNA	10 µl (results in ca. 5µg DNA)
Pst1- RE	1 µl
Age1- RE	1 µl
NEBuffer 4	3 µl
ddH2O	15 µl

The preparation was incubated at 37°C for 3,5 h. Afterwards the fragments were purificated by means of a preparative gel electrophoresis (see below).

Gel extraction of PCR38 and p123 (both digested with NgoMIV and Pst1)

Investigator: Roman

Aim of the experiment: The separated PCR38 and p123 (pSB1C3 RFC25) DNA- fragments from yesterday's restriction digest (both NgoMIV and Pst1) are to be extracted from agarose- gel (which has been stored at -20°C over night), to make them ready for further usage.

Operational sequence: The extraction was performed as described in the manual of the Quiagen Gel- extraction kit. Elution was performed with 30 µl of elution- buffer EB in two steps (à 15 µl), temperated at 50°C. Concentration was determined with NanoDrop:

PCR38: 17,3 ng/µl
p123: 37,2 ng/µl

Tubes were annotated with p191 (p123 NgoMIV/Pst1) and p192 (PCR38 NgoMIV/Pst1).

Gel purification of p123 (Xba1/Age1 double digest) and p123 (Age1/Pst1 double digest)

Investigator: Roman

Aim of the experiment: Aim of the experiment is the purification of two different double digested p123 samples, to make them ready for ligation with the inserts PCR38 and PCR34, respectively.

Operational sequence: The samples were loaded on a 1% universal agarose gel and separated at 100 V for about 45 min. Afterwards, the corresponding gel- bands were cut out and weight. Extraction from gel was performed as described in the manufacturers protocoll (Quiagen gel extraction kit). Changes: Elution was performed in one step with 30µl ddH2O (autoclaved) temperated at 50°C. Concentrations were determined with NanoDrop:

p123 (Xba1/Age1): 70,8 ng/µl
p123 (Pst1/Age1): 59,1 ng/µl

The tubes were annotated with p206 (p123 Age1/Pst1) and p207 (p123 Age1/Xba1).

Ligation of p123 (Age1/Pst1) and PCR38

Investigator: Roman

Aim of the experiment: Ligation of the fragments p123 and PCR38

Operational sequence: Length of fragments:

p123: 2070 bp; c = 59,1 ng/µl
PCR38: 617 bp; c = 17,3 ng/µl

20 µl preparation:

Substance	Volume
p123- DNA	3 µl (ca. 180 ng vector- dna)
PCR38- DNA	10 µl
Ligase	0,5
T4 Ligase Buffer	2 µl
ddH2O	4,5 µl

Negative controls were prepared the same way, using 10 µl of ddH2O instead of PCR38- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath). Afterwards, the samples were stored at 4°C in the fridge until transformation.

Ligation of p123 (Age1/Xba1) and PCR34

Investigator: Roman

Aim of the experiment: Ligation of fragments p123 and PCR34 Operational sequence: Length of fragments:

p123: 2070 bp; c = 70,8 ng/µl
PCR34: 67 bp; c = 3,85 ng/µl (1:100 dilution of original sample)

20 µl preparation:

Substance	Volume
p123- DNA	3 µl (ca. 210 ng vector- dna)
PCR34- DNA	6 µl (out of 1:100 dilution)
Ligase	0,5
T4 Ligase Buffer	2 µl
ddH2O	8,5 µl

Negative controls were prepared the same way, using 6 µl of ddH2O instead of PCR34- DNA. The preparation was incubated 30 min at room temperature and then over night at 16°C (water bath). Afterwards, the samples were stored at 4°C in the fridge until transformation.

Miniprep of 4CL, CHS, OMT, PAL in pYes and APT in original plasmid from GeneArt

Investigator: Katrin

Aim of the experiment: extraction of plasmids (pYes2) that contain 4CL, CHS, OMT, PAL; extraction of original plasmid from GeneArt with APT

QIAprepS Spin Miniprep Kit

step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

the Minipreps were named as follows:

P193: 4CHL+ in pSB1C3-RFC25 (c = 110,7 ng/µl)
P194: 4CL- in pYEs (c = 342,8 ng/µl)
P195: CHS+ in pYEs (c = 423,6 ng/µl)
P196: CHS- in pYEs (c = 92,1 ng/µl)
P197: OMT+ in pYEs (c = 394,6 ng/µl)
P198: OMT- in pYEs (c = 183,0 ng/µl)
P199: PAL+ in pYEs (c = 138,4 ng/µl)
P200: PAL- in pYEs (c = 464,5 ng/µl)
P201: APT in original plasmid (c = 260,0 ng/µl)

Transformation of Ligation-products into E.coli XL-1 Blue

Investigator: Andrea

for each Biobrick 100 µl cells were used and pooled together with 5 µl of ligation product from the 24th of july

(3 hours at 16°C and over night at 4 °C) and from the 19th of july (5 days at 16°C)

Incubation on ice for 30 min

5 min heat shock at 37 °C

cells were prefilled with 1 ml of LB-medium and incubated in a cell-culture shaker at 37 °C for 40 min

100 µl of these cell suspension were plated on antibiotic selection plates (ligations in pYES: Ampicillin; ligations in pSB1C3: Chloramphenicol)

cell suspension was centrifuged at 13000 rpm for 90 s for resuspending the pellet with 100 µl LB and plating also

incubation at 37 °C overnight

Thursday, July 26th

Transformation of ligation products of P126+PCR31, P151+PCR34, P123+PCR38 and P123+PCR34 in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment:Transformation of ligation products of P126+PCR31 (AmpR), P151+PCR34 (CamR), P123+PCR38 (CamR) and P123+PCR34 (CamR) in E. coli XL1-Blue

Operational sequence:

Performed after lab's standard protocol.

Miniprep of APT in pSB1C3-RFC25 and control digestion with Xba1 and Pst1

Investigator: Mary

Aim of the experiment: extraction of plasmid (pSB1C3-RFC25) that contains APT and testing if ligation was succesful; three clones were picked the day before

Miniprep

QIAprepS Spin Miniprep Kit

step 3: invert 2-3 times (don't shake to avoid destruction of genomic DNA)

the Minipreps were named as follows:

APT in pSB1C3-RFC25 clone 1: c=96 ng/µl
APT in pSB1C3-RFC25 clone 2: c=108 ng/µl
APT in pSB1C3-RFC25 clone 3: c=97 ng/µl

Control digest

volume	reagent
2.5 µl	4CL+/-, PAL+/-, CHS+/-, OMT+/-, APT+/-
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

expected bands:

pSB1C3-RF25: 2070bp
APT: 1244bp

Control digest of 4CL, PAL, CHS, OMT, APT in pYES

Investigator: Mary

Aim of the experiment: Test whether the ligation of 4CL, PAL, CHS, OMT, APT in pYES was successful

Plasmids are taken from miniprep from 25.07.2012

volume	reagent
2.5 µl	4CL+/-, PAL+/-, CHS+/-, OMT+/-, APT+/-
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

expected bands:

pYES: about 5800bp
4CL: 1685bp
PAL: 2151bp
CHS: 1173bp
OMT: 1222bp
APT: 1244bp

pour on yeast agarplates

Investigator: Mary

Aim of the experiment: prepare selection-agarplates without Uracil (Some plates including glucose, some including galactose)

it was strange that the agar was still pretty liquid after waiting for one hour.

see pYES-manual

Picking of clones of transformation from 25.07.

Investigator: Lara

Aim: Amplification of clones for extraction of plasmids and subsequent proof of functional ligation.

6 clones were picked for each ligation (PCR1 in pYESnew, PCR2 (p144) in pYESnew and PCR in pSB1C3. Clones containing pYESnew were put into 4 ml LB with 4 µl of ampillicin stock solution, clones containing pSB1C3 were put into chloramphenicol-containing media. Incubation at 37 °C over night.

Transformation of plasmids P40&P42 into E.coli XL1 blue

Investigator: Lara

Aim:

Transformation of plasmids P40 and P42 into E.coli XL1 blue to get plasmids of higher quality. P40&P42 are directly extracted from the expression strain BL21(DE). The quality of the plasmids might not be sufficient for Quickchange site-directed mutagenesis. Therefore transformation into E.coli XL1 blue and subsequent plasmid preparation to get plasmids with sufficient quality for SDM.

Procedure:

100 μl of competent XL1 blue cells were thawed on ice. 1 µl plasmid DNA (P40 or P42) was added. Incubation for 30 min on ice. 5 min heatshock at 37°C. 1 ml of LB medium without antibiotic was added, incubation for 45 min at 180 rpm/37°C. After incubation, 100 µl of the cell suspension were plated on antibiotic containing plates (P40: Kan, P42: Amp). The remaining solution was centrifuged for 60 sec, resuspended in 100 µl LB and plated, as well. Incubation at 37 °C over night.

Friday, July 27th

Picking from the overnight transformation of ligated P126+PCR31, P151+PCR34, P123+PCR38 and P123+PCR34 in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment Picking of transformated E. coliXL1-Blue with ligation product of P126+PCR31 (AmpR), P151+PCR34 (CamR), P123+PCR38 (CamR) and P123+PCR34 (CamR).

Procedure

Colonies were picked with pipette tips and transformed into a new cell-culture tube with 4 ml of LB-medium and antibiotics and were put overnight in a 180 rpm cell culture shaker at 37 °C. P126+PCR31 (AmpR), P151+PCR34 (CamR), P123+PCR38 (CamR) and P123+PCR34 (CamR)

Transferring E. coliXL1-Blue colonies, transformed with BBa_I15008 (heme oxygenase) and BBa_K105005 (LexA), from old antibiotic plates on new plates

Investigator: Jeff

Aim of the experiment With a sterile incolation loop the colonies were transferred on a new antibiotic plate, because the plates are already 4 weeks old.

Procedure

Incolation loop was put for few second into the flame of a Bunsen burner

Colonies from plate with BBa_I15008 (heme oxygenase, KanR) and BBa_K105005 (LexA, AmpR) were transferred on a new antibiotic plate

Overnight-culture at 37 °C

Miniprep and control digest of PAL in pYES picked on thursday 26th July

Investigator: Ingmar

Aim of the experiment: Test whether the ligation of PAL in pYES was successful

Miniprep Using a Quiagen Miniprep kit a plasmid isolation of two picked clones of the PAL+ in pYes2 RFC25 ligation was done. The miniprep product of the first clone was named P219, the one of the second clone P220. Both were used for the following control digest.

control digest

volume	reagent
2.5 µl	PAL+
0.25 µl	Xbal (20U/µl)
0.25 µl	PstI (20U/µl)
2 µl	NEB4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

expected bands:

pYES:5819bp
PAL: 2151bp

As the picture only shows one band at the expected length of the vecotr backbone the ligation was not successfull and will be repeated with a reduced quotient of insert to vector of 3.

Ligation of PAL+ (PCR32) and APT (P189) with pYes2 RFC25 (P175)

Investigator: Ingmar

Aim of the experiment: Insert the genes of PAL and APT in pYEs2 RFC 25 in order to test their expression in yeast.

Ligation

PCR product	Volume	Vector	Volume	Volume T4 DNA Ligase	Volume T4 DNA Ligase buffer	Volume ddH20	New Plasimd Number
PAL+ (PCR32)	6.6	P 175	1.4	1 µl	2 µl	9 µl	P 221
APT (P 189)	7.06	P 175	0.94	1 µl	2 µl	9 µl	P 222
control: ddH2O	7	P 175	1	1 µl	2 µl	9 µl

The Ligation product of PAL+ and pYes was labeled P233, the one of APT and pYes P234.

Plasmid extraction of plasmids PCR1/pYes, P144/pYES, PCR1/pSB1C3

Investigator: Lara

Aim of the experiment: Extract plasmids from ligation of PCR1 in pYES, P144 in pYES and PCR1 in pSB1C3 for further analytical restriction digest. (6 clones were picked for each ligation and plasmids subsequently extracted.)

Prodedure: Plasmids were extraced by using Qiagen plasmid miniprep kit.

Following concentrations were obtained:

1_1 - 1_6

PCR1 in pYESnew clone 1: c=66 ng/µl
PCR1 in pYESnew clone 2: c=182 ng/µl
PCR1 in pYESnew clone 3: c=98 ng/µl
PCR1 in pYESnew clone 4: c=326 ng/µl
PCR1 in pYESnew clone 5: c=87 ng/µl
PCR1 in pYESnew clone 6: c=156 ng/µl

2_1 - 2_6

P144(PCR2) in pYESnew clone 1: c=195 ng/µl
P144(PCR2) in pYESnew clone 2: c=202 ng/µl
P144(PCR2) in pYESnew clone 3: c=198 ng/µl
P144(PCR2) in pYESnew clone 4: c=77 ng/µl
P144(PCR2) in pYESnew clone 5: c=95 ng/µl
P144(PCR2) in pYESnew clone 6: c=200 ng/µl

3_1 -3_6

PCR1 in pSB1C3-RFC25 clone 1: c=116 ng/µl
PCR1 in pSB1C3-RFC25 clone 2: c=110 ng/µl
PCR1 in pSB1C3-RFC25 clone 3: c=116 ng/µl
PCR1 in pSB1C3-RFC25 clone 4: c=112 ng/µl
PCR1 in pSB1C3-RFC25 clone 5: c=139 ng/µl
PCR1 in pSB1C3-RFC25 clone 6: c=80 ng/µl

Restriction digest of plasmids from 6 clones each of PCR1/pYESnew, P144(PCR2)/pYESnew, PCR1/pSB1C3

Investigator: Lara

Aim of the experiment: Analytical restriction digest of plasmids to check for insert.

volume	reagent
3 µl	DNA
2 µl	Buffer 4
0,25 µl	Xba1
0,25 µl	Spe1-HF
0,2 µl	BSA(100x)
14,3 µl	ddH2O

Incubation: 37 °C; 1,5 h

A mastermix for 19 samples was made.

Analytical gel electrophoresis

Investigator: Lara

Aim of the experiment: Analytical gel electrophoresis of products from restriction digest.

Small-Scale Yeast Transformation of 4CL, CHS, OMT and PAL- in pYES

Investigator: Daniela

Aim of the experiment:Transformation of P193 - P198 and P200 in Yeast

The protocol on page 13 of the pYES2 manual was used.

Only modifications are noted:

step 1: inoculate in 4 ml YPD medium

step 2: OD600 = 10 -> to determine a OD600 of 0.4 in 50 ml, 2.5 ml yeast suspension and 47.5 ml YPD medium were used (1:20 dilution)

steps 3 and 4: centrifugation for 5 min, 4 °C

step 5: room temperature was about 35 °C

step 6:

1 µg plasmid DNA

P193: c = 110.7 ng/µl -> 9 µl
P194: c = 342.8 ng/µl -> 3 µl
P195: c = 423.6 ng/µl -> 2.4 µl
P196: c = 92.1 ng/µl -> 11 µl
P197: c = 394.6 ng/µl -> 2.5 µl
P198: c = 183.4 ng/µl -> 5.5 µl
P200: c = 464.5 ng/µl -> 2.2 µl

100 µg denatured sheared salmon sperm: the one from Simon was used -> 10 µl

step 8: incubation was carried out at 35 °C because the thermoblock did not achieve a lower temperature

The SCU- plates are incubated at 30°C over the weekend.

Colonies were grown on 2 plates (31.07.2012): CHS+ : 1 colony OMT+ : 3 colonies

-> repetition of transformation on plates with glucose!

Saturday, July 28th

Miniprep of picked E. coli XL1-Blue transformated with ligation products of P126+PCR31, P151+PCR34, P123+PCR38 and P123+PCR34

Sunday, July 29th

Picking of clones from PAL+ for a overnight culture

Investigator: Ingmar

Aim of the experiment:Inoculation of LB medium with clones picked from the transfomation of P183 (PAL+ (PCR32) in pYES (P175)) done on Monday, 23rd July in order to test on monday wheather the Ligation was successfull. Operationale sequence:

Two clones were picked an transferred to 6 ml LB medium containing 1:1000 Ampicillin.
Incubation overnight at 37°C, 180 rpm.

Week 8

Limonene (14 Experiments):

Coumaryl (5 Experiments):

Thaumatin (2 Experiments):

Media and plates for yeast transformation

Constitutive Promoter (14 Experiments):

Light Switchable Promoter (16 Experiments):

Show Details ...

Monday, July 30th

Extraction of Yeast genomic DNA

Investigator: Georg

Aim of Experiment: To get genomic DNA of yeast for amplify TEF2-P, TEF1-T,ADH1-T by PCR

100 µl of overnight culture of S. cerevisiae is centrifuged 5 min (13400 rpm)
Remove supernatant and resuspend pellet in 100 µl 200 mM LiAC 1% SDS
Incubate for 5 min at 70 C
Precipitate DNA by adding 300µl 96% Ethanol and vortexing
Sedimentation for 3 min (13400 rpm)
Removal of supernatant and washing with 500 µl 70& EtOH + centrifuge
remove supernatant and solubilisate pellet in 100 ml 1x TE-buffer
Remove cell-parts by 1 min of centrifugation and move supernatant in new Eppi
Add 50 ml 7 M NH4AC-solution, let incubate at room-temperature for 5 min
Centrifuge for 10 min
Move supernatant to a new eppi
ADD 70 µl 7,5 M NH4OAc and 280 µl Isopropanol
Incubate 10 min at room-temperature and centrifuge 10 min
remove supernatant
wash pellet with 100µl 80% Ethanol, centrifuge for 10 min
remove supernatant
dry pelleted DNA, and resolubilsate in 1x TE-buffer

( Extraction had to be done twice)

Nanodrop of yeast genomic DNA

Investigator: Georg

S.C1: 51,2 ng/µl
S.C2: 24,6 ng/µl
S.C3: 41,3 ng/µl
S.C4: 45,9 ng/µl

Analytical digestion and gelelectrophoresis of the plasmids P221-P232

Investigator: Saskia

Aim of the experiment: Analytical digest of P221-P223 with NdeI and BamHI and of P224-P232 with XbaI and AgeI-HF and analytical gelelectrophoresis .

Procedure:

Analytical restriction digest and gelelectrophoresis of P221-P223 with NdeI and BamHI

Reaction batch for each plasmid:

Reagent	Volume in µl
Tango Buffer 10x	4 µl
BamHI (NEB)	0.5 µl
NdeI (NEB)	0.5 µl
Plasmid DNA	2.5 µl
ddH2O	12.5 µl
TOTAL	20 µl

Incubation at 37 °C for 1 h 20 min.

Analytical gelelectrophoresis (1%) at 90 V for 40-45 min.

Analytical restriction digest and gelelectrophoresis of P224-P232 with XbaI and AgeI-HF
Reaction batch for each plasmid:

Reagent	Volume in µl
NEBuffer4 10x	2 µl
BSA 100x	0.2 µl
XbaI (Fermentas)	0.25 µl
AgeI-HF (Fermentas)	0.25 µl
Plasmid DNA	2.5 µl
ddH2O	14.8 µl
TOTAL	20 µl

Incubation at 37 °C for 1 h 20 min.

Analytical gelelectrophoresis (1%) at 90 V for 40-45 min.

Order of gel-pockets:

1 kbp ladder	P221	P222	P223	100 bp ladder
	Corrupt	Corrupt	Corrupt

Order of gel-pockets:

1 kbp ladder	P224	P225	P226	P227	P228	P229	P230	P231	P232	100 bp ladder
	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	?Questionable?	?Questionable?	?Questionable?

Transformation of ligation products of PAL+ (PCR32) and APT(P189) in pYES2 RFC 25 (P175)into E.coli Xl1-Blue

Investigator: Ingmar

Aim of the experiment:Transformation of the ligation products of PAL+ (PCR32), APT (P189) and the negative control in pYes in XL1 Blue. Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 5 µl of the ligation products
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Miniprep and control digest of PAL+ in pYES picked on sunday 29th July

Investigator: Ingmar

Aim of the experiment: Test whether the ligation of PAL in pYES was successful

Miniprep

Using a Quiagen Miniprep kit a plasmid isolation of two picked clones of the PAL+ in pYes2 RFC25 ligation was done. The miniprep product of the first clone was named P235, the one of the second clone P236. Both were used for the following control digest.

control digest

volume	reagent
2.5 µl	PAL+
0.25 µl	Xbal (10U/µl)
0.25 µl	PstI (10U/µl)
2 µl	Tango (10x)
15 µl	ddH2O

expected bands:

pYES:5795bp
PAL: 2201bp

The picture shows in both cases the two expected bands at 5795 bp an 2201 bp. Therefore the ligation was successfull.

Miniprep of Schwab plasmids P40 & P42 from E.coli XL1 blue

Investigator: Lara

Aim of experiment: Get plasmids carrying lavendula limonene synthase gene for subsequent site-directed mutagenesis.

Plasmid concentrations:

P40 clone 1: 155 ng/µl
P40 clone 2: 114 ng/µl
P42 clone 1: 40 ng/µl
P42 clone 2: 32 ng/µl

Analytical restriction digest of extracted Schwab plasmids carrying Lavendula LS

Investigator: Lara

Aim of experiment: Check whether insert is OK.

Digest of P40 clone 1 and clone 2

volume	reagent
2.5 µl	plasmid DNA
0.25 µl	NcoI
0.25 µl	HindIII
2 µl	Buffer Tango (10x)
15 µl	ddH2O

Digest of P42 clone 1 and clone 2

volume	reagent
4.5 µl	plasmid DNA
0.25 µl	EcoRI
0.25 µl	NotI
2 µl	Buffer Orange (10x)
13 µl	ddH2O

Incubation for 1,5 h at 37°C.

Clones renamed:

P40 clone 1: now P241
P40 clone 2: now P242
P42 clone 1: now P243
P42 clone 2: now P244

Analytical restriction digest of plasmids containing citrus LS (repetition of digest from July, 27th)

Investigator: Lara

Aim of experiment: Check whether ligations PCR1/pYESnew, P144(PCR2)/pYESnew and PCR1/pSB1C3 have worked. This time, a standard protocol with 2,5 µl of DNA was used. Furthermore, Pst-1 HF was used instead of Spe1 (as on Friday, July 27th).

Digest of plasmids PCR1/pYESnew clone 1,3,5 and 6; P144(PCR2)/pYESnew clone 1,3,5 and 6; PCR1/pSB1C3 clone 1,5 and 6.

volume	reagent
2.5 µl	plasmid DNA
0.25 µl	Pst1-HF
0.25 µl	Xba1
2 µl	NEB Buffer 4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

Incubation for 1,5 h at 37 °C.

Tuesday, July 31st

Nanodrop

Investigator: Georg

P54: 235 ng/µl
P55: 645 ng/µl
P57: 491,1 ng/µl

P87: 259 ng/µl
P86: 99 ng/µl
P88: 86 ng/µl

P90: 1161 ng/µl
P91: 261 ng/µl
P89: 630 ng/µl

Prep. digestion of P90, P87, P55 and prep. gelelectrophoresis

Investigator: Georg

Reaction batch for digestion:

volume	reagent
3 µl	PstI-HF (NEB)
3 µl	XbaI (NEB)
12 µl	NEB-4 buffer
1,2 µl	100 x BSA (NEB)
40,8 µl	dd H20
=60µl	TOTAL

To 20 µl digestive mastermix 20 µl of DNA was added and mixed
Digestion was processed for 3 hours at 37 C

Analytical digestion of pYESII with PvuII and SwaI

Investigator: Georg

Reaction batch for digestion:

volume	reagent
0,25 µl	SWAI (NEB)
0,25 µl	PvuII (NEB)
2 µl	NEB-3 buffer
0,2 µl	100 x BSA (NEB)
14,85 µl	dd H20
= 17,5µl	TOTAL

After 1 h digestion with SwaI at room temperature, PvuII was added and digested at 37 C, 1 h

Picking from the overnight transformation of ligated P123+PCR38 in E. coli XL1-Blue from July, 27th

Investigator: Jeff, Georg

Aim of the experiment: Repeat picking from the overnight transformation of ligated P123+PCR38 in E. coli XL1-Blue because the last 3 picked colonies are negative.

Procedure:

Colonies were picked with pipette tips and transformed into a new cell-culture tube with 4 ml of LB-medium and antibiotics and were put overnight in a 180 rpm cell culture shaker at 37 °C. P123+PCR38 (CamR).

Quickchange of Schwab plasmid P40 clone 1

Investigator: Lara

Aim of experiment: Remove Age1 restriction site in gene coding for lavendula limonene synthase.

PCR

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
2 µl	Plasmid P241
1 µl	1:10 dilution of O60 (10 pmol/µL)
1 µl	1:10 dilution of O61 (10 pmol/µL)
18 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	12	95°C	30 sec
		55°C	1 min
		68°C	7 min

Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the SDM PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Kan-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Kan-LB-plate

Preparative digest of PCR1, PCR2 with XbaI and AgeI (additional positive control P155)

Investigator: Andrea

Digestion of PCR1, PCR2 and P155 (pYES) with XbaI and AgeI

volume	reagent
8 µl	PCR1
4 µl	NEB Buffer
0.4 µl	BSA
1 µl	XbaI (20 U/µl)
1 µl	AgeI (20 U/µl)
25,6 µl	ddH2O

volume	reagent
10 µl	PCR2
4 µl	NEB Buffer
0.4 µl	BSA
1 µl	XbaI (20 U/µl)
1 µl	AgeI (20 U/µl)
23,6 µl	ddH2O

volume	reagent
10 µl	P155
4 µl	NEB Buffer
0.4 µl	BSA
1 µl	XbaI (20 U/µl)
1 µl	AgeI (20 U/µl)
23,6 µl	ddH2O

Mastermix of Buffer, BSA and Enzymes was added to the DNA and water.

Incubation: 37 °C, 3 h

preparative gel electrophoresis

Investigator: Andrea

PCR1 / PCR2: ca. 1600 bp
P155: ca. 5800 bp

Ligation of digested PCR1 with P133 (pSB1C3) and P175 (pYES) (XbaI and AgeI)

Investigator: Andrea

Concentration (Nano Drop:
LIMS Citrus (PCR 1) = ? ng/µl
LIMS Citrus (PCR 2) = ? ng/µl
P175 = 107,3 ng/µl
P133 = 41.8 ng/µl

PCR1 and P175

volume	reagent
1 µl	P175
14,27 µl	PCR 1
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
1,73 µl	ddH2O

PCR1 and P133

volume	reagent
2,4 µl	P133
14,27 µl	PCR 1
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
0,33 µl	ddH2O

PCR2 and P175

volume	reagent
1 µl	P175
11,99 µl	PCR 2
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
4,01 µl	ddH2O

PCR2 and P133

volume	reagent
2,4 µl	P133
11,99 µl	PCR 2
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
2,61 µl	ddH2O

Negativ control P175

volume	reagent
1 µl	P175
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
16 µl	ddH2O

Negativ control P133

volume	reagent
2,4 µl	P175
1 µl	T4 DNA Ligase
2 µl	T4-ligase buffer (10x)
14,4 µl	ddH2O

water bath 16 °C over night

Media and plates for yeast transformation

Investigator: Martin, Alois

Aim of the experiment: Producing media and plates for yeast transformation (according to pYes_manual_kommentiert)

YPD-Medium, YPD-plates, 10X TE, 10X LiAc, 1x LiAc/0.5x TE

Wednesday, August 1st

Miniprep of picked E. coli XL1-Blue transformated with ligation products of P123+PCR38

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of picked E. coli XL1-Blue transformated with ligation products of P123+PCR38.

Procedure:

Miniprep was performed after manufacturer's protocol. (P251-P260)

Analytical digestion and gelelectrophoresis of Miniprep E. coli XL1-Blue transformated with ligation products of P123+PCR38 and of pGBKT7 plasmid

Investigator: Dennis, Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of Miniprep E. coli XL1-Blue transformated with ligation products of P123+PCR38 to see whether the ligation was successful and of pGBKT7 plasmid to see if the MfeI and BamHI restriction enzymes work.

Procedure:

Mastermix for digestion with XbaI+AgeI-Hf of ligation products of P123+P38:

Reagent	Volume in µl
Buffer 4 (10x)	22 µl
BSA (100x) (NEB)	2.2 µl
XbaI (NEB)	1.75 µl
AgeI-Hf (NEB)	1.75 µl
ddH2O	162.8 µl
TOTAL MASTERMIX	192.5 µl

17.5 µl of Mastermix + 2.5 µl of the plasmid DNA (P251-P260)

Composition for analytical restriction digestion of P99 with MfeI+BamHI

Reagent	Volume in µl
Buffer G (10x)	2 µl
MfeI (NEB)	0.25 µl
BamHI (NEB)	0.25 µl
Plasmid DNA (P99; pGBKT7)	2.5 µl
ddH2O	15 µl
TOTAL	20 µl

Analytic Gelelectrophoresis for 1 h at 90 V.

Order of gel-pockets:

1 kbp ladder	P251	P252	P253	P254	P255	P256	P257	P258	P259	P260	100 bp ladder
100 ladder	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	Corrupt	1 kb ladder

Order of gel-pockets:

100 bp ladder	P99 control digestion with MfeI+BamHI	P99 control undigested	P123 control undigested	100 bp ladder (accidently)
	Okay	Okay	Okay

→MfeI and BamHI are working! (Expected DNA strands for P99 digestion at 731 bp, 2443 bp and 4129 bp; that's what we got.)

Preperative digestion and gelelectrophoresis of PCR37 with XbaI+AgeI-HF

Investigator: Jeff

Aim of the experiment:

Procedure:

volume	reagent
25 µl	PCR37
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
17.5 µl	ddH2O
=50 µl	TOTAL

Gel extraction of preperative gelelectrohphoresis of PCR37

Investigator: Jeff

Aim of the experiment:

Ligation of PCR39+P207 for cloning LexA with new RFC25 pre- and suffix into a plasmid

Investigator: Jeff

Aim of the experiment:

Procedure

Substance	Volume
P207 (digested plasmid DNA (P123) with XbaI and AgeI-HF)	1.42 µl (~100 ng vector dna)
PCR39 (digested insert DNA (PCR37) with XbaI and AgeI-HF)	10.17 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	5.91 µl
TOTAL	=20 µl

PCR of P80 to introduce RFC25 pre- and suffix to Pif3

Investigator: Jeff

Aim of the experiment:

Procedure:

PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer O31 1:10 dilution (TUM12-LSPS-fw)
1 µl	10 µM Reverse Primer O32 1:10 dilution (TUM12-LSPS-rv )
0.25 µL	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl	Plasmid DNA P80
35.75 µL	ELGA Water
=50 µL	TOTAL

The PCR program was performed after following scheme with following conditions

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	55 °C	60 s
	68 °C	30 s
Final extension	68 °C	5 min
Hold	4 °C	infinite

PCR purification of PCR of P80

Investigator: Jeff

Aim of the experiment:

Preparative digestion of pYesII with SwaI and PvuII

Preparative digestion of pYesII

Reagent	Volume in µl
SwaI	2 µl
PvuII	2 µl
Neb3 buffer	4 µl
BSA	0,4 µl
H20	31,6 µl
Volume	40 µl

Geldigestion was performed with SwaI and BSA at room temperature for 2,5 hours. Afterwards PvuII was added and digested another 2,5 hours at 37 C

Preparative Gel of pYESII digestion

Investigator: Georg

Preparative Digestion was loaded onto a 1% preparative agarose gel
Gel was run for 150 min at 70 V

Nanodrop measurement of P245-P250

Gelextraction was performed according to gelextraction protocol

Probe: Concentration: P245 4,5 ng/µl P246 7,5 ng/µl P247 22,7 ng/µl P248 21,1 ng/µl P249 3,3 ng/µl P250 3,8 ng/µl

Transformation of ligation products and quickchange products

Investigator: Lara

Aim: Transformation of ligation products (ligation July 31st) and quickchange products (repetition, quickchange of July 31st).

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the SDM PCR product or 5 µl of ligation product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Kan-LB-plate (Quickchange product), Amp-plate (pYES) or Chloramphenicol (pSB1C3)
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an antibiotic containing LB-plate

Miniprep and control digest of APT in pYES

Investigator: Katrin

Aim of the experiment: Test whether the ligation of APT in pYES was successful

Miniprep

Using a Quiagen Miniprep kit, a plasmid isolation of three picked clones of a APT in pYes2 RFC25 ligation was done. The miniprep products were named P261 (1st clone), P262 (2nd clone) and P263 (3rd clone).All three of them were used for the following control digest.

The resulting plamid-concentrations (measured with nanodrop) were clone 1 (P261): 149,0 ng/µl clone 2 (P262): 153,5 ng/µl clone 3 (P263): 158,4 ng/µl

control digest

volume	reagent
2.5 µl	APT (clones 1,2,3)
0.25 µl	Xbal (10U/µl)
0.25 µl	AgeI (10U/µl)
2 µl	NEB 4 (10x)
2 µl	BSA (10x)
13 µl	ddH2O

expected bands (pYes has 2 AgeI restriction site):

pYES fragment 1:5398 bp
pYes fragment 2: 451
APT: 1244 bp

The picture shows the expected bands for clones 1 and 3

Media and plates for yeast transformation

Investigator: Martin, Alois

Aim of the experiment: Producing media and plates for yeast transformation (according to pYes_manual_kommentiert)

20% glucose, 20x SC stock (without uracil and without yeast nitrogen base), SC plates with glucose

Thursday, August 2nd

Transformation of ligation product P207/PCR39

Investigator: Lara

Aim: Transformation of ligation products P207/PCR39 and P207/NK.

Transformation into E.coli Xl1-Blue

Unfortunately the lab assistents went home so that the incubation times had to be shortened.

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 5 µl of the ligation products
incubation on ice for 25 min
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 25 min
plating of 100 µl on an Chlp-LB-plate
sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Chlp-LB-plate

Gelextraction of pYesII -f1,-Gal4

pYes II extraction was performed according to manufacturers protocoll

Concentration was measured with nanodrop

Probe: Concentration P265 12,8 ng/µl P264 12,9 ng/µl

Circularization of linearized plasmid backbone pYesII

volume	reagent
3,9 µl	pYes2
1 µl	T4 ligase
5 µl	T4 ligase buffer
2,5 µl	PEG 4000
35,1 µl	H20
50 µl	Volume

Ligation was performed over night at 16 C Negative control was done with H20 in exchange to pYES2

Repetition of Quickchange mutagenesis of lavendula limonene synthase

Investigator: Lara

Aim: No colonies were observable after second transformation of quickchange PCR products. Therefore the quickchange pcr reaction was repeated with a modified protocol:

PCR

Reaction batch 1

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P242
0.5 µl	1:10 dilution of O60 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Turbo DNA polymerase (2.5 U / µl)

Reaction batch 2

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	Plasmid P242
0.5 µl	1:10 dilution of O61 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Turbo DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	10	95°C	30 sec
		55°C	1 min
		68°C	7 min

Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were once more applied.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

! Unfortunately someone turned off the heat block, so that the reaction tube was below 37 °C (approx. 25 °C) for about 45 min. After recognition (after one hour of incubation), the heat block was turned on again and the reaction tube was incubated for another 30 min.

Transformation into E.coli Xl1-Blue

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the PCR product
incubation on ice for 25 min
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 25 min
plating of 100 µl on an Kan-LB-plate
sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Kan-LB-plate

PCR of C-LS3 (BBa_I742111, Trafo 16.6)

Investigator: Lara

Aim: To get more PCR product in case another preparative digest is needed.

Primer with consensus sequence

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer O27
1 µl	10 µM Reverse Primer O30
0.25 µl	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl	Plasmid DNA (BBa_I742111) Clone 3
35.75 µl	dd water
50 µL	TOTAL

Primer without consensus sequence

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer O28
1 µl	10 µM Reverse Primer O30
0.25 µl	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl	Plasmid DNA (BBa_I742111) Clone 3
35.75 µl	dd water
50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	47 °C	30 s
	68 °C	1,75 min
Final extension	68 °C	5 min
Hold	4 °C	1 h

Analytical gel electrophoresis

Preparation of YPD Medium and Picking of S. cerevisiae clones

Investigator: Lara, Katrin

YPD Yeast Extract Peptone Dextrose Medium (1 liter) the following substances were dissolved in 1000 ml of water and then autoclaved

1% yeast extract
2% peptone
2% dextrose (D-glucose)

Picking of two clones of S. cerevisiae DD (17.17.2012): The clones were put into YPD medium and incubated at 30 °C over night. Additional 0,8 g Glucose were added to one of the cell culture tubes.

Friday, August 3rd

Transformation of E.coli Xl1-blue with Vector pGADT7-AD

Investigator:Georg

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

1 µl of pGADT7-AD (P98) was added to 100 µl of competent cells and mixed gently.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on ampicillin plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Transformation of E.coli Xl1-blue with pYES-TUM overnight ligation

Investigator:Georg

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

1 µl of pGADT7-AD (P98) was added to 100 µl of competent cells and mixed gently.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on ampicillin plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Preparative digestion of TEF1-P and ADH1-P with XbaI and PstI

Investigator: Georg

Reaction batch for digestion:

volume	reagent
3 µl	PstI-HF (NEB)
3 µl	XbaI (NEB)
12 µl	NEB-4 buffer
1,2 µl	100 x BSA (NEB)
40,8 µl	dd H20
=60µl	TOTAL

20 µl Mastermix and 20 µl DNA were mixed and digestion processed at 37 C for 3 hours.

PCR of ADH1-T, TEF2-P, TEF1-T from Saccharomyces cerv. genome

Investigator: Georg

Reaction batch for PCR-ADH1-T:

volume	reagent
10µl	5x One taq buffer
1 µl	10 mM DNTPs
1 µl	O66/10
1µl	O67/10
0,25	dd H20
=35,75µl	TOTAL

Reaction batch for PCR-TEF2-P:

volume	reagent
1,23 ml	P237
10µl	5x One taq buffer
1 µl	10 mM DNTPs
1 µl	O64/10
1µl	O65/10
0,25	dd H20
=35,52µl	TOTAL

Reaction batch for PCR-TEF2-P:

volume	reagent
1,23 ml	P237
10µl	5x One taq buffer
1 µl	10 mM DNTPs
1 µl	O64/10
1µl	O65/10
0,25	dd H20
=35,75µl	TOTAL

Reaction batch for PCR-TEF1-T:

volume	reagent
1,23 ml	P237
10µl	5x One taq buffer
1 µl	10 mM DNTPs
1 µl	O62/10
1µl	O63/10
0,25	dd H20
=35,75µl	TOTAL

Cycling condition were used as follows:
94 C 30 sek
(30 Cycles) 94 C 30 sek
(30 Cycles) 56 C 60 sek
(30 Cycles) 68 C 2 min
Final extension: 68 C
Hold: 4 C

Transformation of E.coli XL1 blue with ligation product P207/PCR39

Investigator: Lara

Aim: Incubation times of transformation of August 2nd had to be shortened because the lab employees left. Therefore the transformation didn't work properly. --> Repetition of the transformation of E.coli XL1 blue with ligation products P207/PCR39 and P207/NK.

Transformation into E.coli Xl1-Blue

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 5 µl of the ligation products
incubation on ice for 30 min
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 45 min
plating of 100 µl on an Chlp-LB-plate
sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Chlp-LB-plate

Analytical restriction digest of quickchange products

Investigator: Lara

Aim: Check whether site directed mutagenesis to eliminate Age1 restriction site has worked.

Quickchange PCR product purification: The Quickchange PCR products were purified with Qiagen PCR Purification Kit before analytical restriction digest:

P241 SDM: 7 ng/µl
P242 SDM: 63 ng/µl

Restriction digest of p241 SDM (31.7.), p242 SDM (2.8.) and p242 (as positive control)

volume	reagent
2.5 µl	plasmid DNA
0.25 µl	Age1-HF
2 µl	NEBuffer 4
2 µl	BSA (10x)
13.25 µl	ddH2O

Analytical Gel

1. Standard (1 kb Gene Ruler)

2. p242, digested with Age1 (positive control)

3. p241 SDM

4. p241 SDM, digested with Age1

5. p242 SDM

6. p242 SDM, digested with Age1

7. PCR 42

8. PCR 43

Transformation of E.coli XL1 blue with P242 SDM

Investigator: Lara

Aim: Incubation times of transformation of August 2nd had to be shortened because the lab employees left. Therefore the transformation didn't work properly. --> Repetition of the transformation with P242 SDM.

Transformation into E.coli Xl1-Blue

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
two transformations: 1. addition of 1 µl of the purified Quickchange PCR product; 2. addition of 4 µl of the purified Quickchange PCR product
incubation on ice for 30 min
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubation at 37°C and 180 rpm for 45 min
plating of 100 µl on an Kan-LB-plate
sedimenting the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspension of the sediment in 100 µl LB-medium and plating it as well on an Kan-LB-plate

Repetition of small-Scale Yeast Transformation of 4CL, CHS, OMT, PAL and APT in pYES

Investigator: Mary

Aim of the experiment:Transformation of P193 - P198, P200, P236, P263 and GFP (as a positive control - from simon) in Yeast

The protocol on page 13 of the pYES2 manual was used.

Only modifications are noted:

step 1: inoculate in 4 ml YPD medium

step 2: OD600 = 9 -> to determine a OD600 of 0.4 in 50 ml, 2.2 ml yeast suspension and 42.5 ml YPD medium were used, 5ml 20% Glucose was added (wrong information about the YPD-medium: we suggested that Glucose caramelizes when autoclaved together with medium - but it is not the case! Only agar and glucose will caramelize).

steps 3 and 4: centrifugation for 5 min, 4 °C

step 6:

1 µg plasmid DNA

P193: c = 110 ng/µl -> 9.1 µl
P194: c = 342 ng/µl -> 2.9 µl
P195: c = 423 ng/µl -> 2.4 µl
P196: c = 92 ng/µl -> 10.8 µl
P197: c = 394 ng/µl -> 2.5 µl
P198: c = 183 ng/µl -> 5.5 µl
P200: c = 464 ng/µl -> 2.2 µl
P236: c = 291 ng/µl -> 3.4 µl
P263: c = 158 ng/µl -> 6.3 µl
Positive control: 2.19/4 (pYES2+EGFP) c = 200 ng/µl -> 5µl

100 µg denatured sheared salmon sperm: the one from Simon was used -> 10 µl

step 7:

7 ml 50% PEG3350 was synthesized (3.5 g in 7 ml bidest.water) 6.4 ml 50% PEG3350 + 800 µl 10x LiAc + 800 µl 10x TE were mixed

The cells were plated out on SC-U plates with Glucose and incubated the weekend at 30°C

Transformation of E.coli XL1 blue with ligation products

Investigator: Katrin

Aim: Transformation of ligation products PCR2/P133, PCR1/P133, MK/P133, PCR2/P175, MK/P175

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
of 1 µl of the SDM PCR product or 5 µl of ligation product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 45 min
plate 100 µl on an Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133)
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an antibiotic containing LB-plate

Sunday, August 5th

PCR of pGBKT7 (P99) to introduce RFC pre- and suffix to Gal4 DNA binding domain (Gal4DBD/Gal4BD)

Investigator: Jeff

Aim of the experiment:PCR of pGBKT7 (P99) to introduce RFC pre- and suffix to Gal4 DNA binding domain (Gal4DBD/Gal4BD) for fusion protein construction of N'-PhyB(N-Terminus)-20aaLinker-GalDBD-C'. (If there is time one can direcly clone PhyB in the C-Terminus of Gal4DBD directly.)

Procedure:

PCR with primer: TUM12-Gal4BD-fw and TUM12-Gal4BD-rv

Reaction batch:

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	100 µM Forward Primer O73 (TUM12-Gal4BD-fw)
1 µl	100 µM Reverse Primer O74 (TUM12-Gal4BD-rv)
0.25 µL	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µL)
1 µl	Plasmid DNA P99
35.75 µL	ddH2O
=50 µL	TOTAL

The PCR program was performed after following scheme with following conditions

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	57 °C	30 s
	68 °C	30 s
Final extension	68 °C	5 min
Hold	4 °C	infinite

Transfer of old transformed E. coli XL-1 blue from old antibiotic plates to new antibiotic plates and of old Y190 S. cerevisiae strain to a new YPD plates

Investigator: Jeff

Aim of the experiment: Transfer of old transformed E. coli XL-1 blue from old antibiotic plates to new antibiotic plates and of old Y190 S. cerevisiae strain to a new YPD plates.

Procedure:

Transformed E. coli XL1-Blue: With an incolution loop under sterile conditions the bacteria colonies from the plates were transferred by dilution plating on new antibiotic plates. Attempts were made to take all the colonies to have a multiclonal plate.

The E. coli XL1-Blue plates from these transformations were taken:

Parts for Phycocyanobilin synthesis:
BBa_I15008 in pSB2K3 (KanR): Heme oxygenase
Parts for N'-SV40NLS-PhyB(NT)-20aaLinker-LexA-C' and N'-PhyB(NT)-20aaLinker-Gal4DBD-C'/N'-SV40NLS-PhyB(NT)-20aaLinker-Gal4DBD-C' construction:
BBa_K207000 in pSB3K3 (KanR): PhyB(621NT)-GalDBD	BBa_K207001 in pSB1A2 (AmpR): PhyB(621NT)	BBa_K105005 in pSB2K3 (KanR): LexA DNA binding protein	pGBKT7 (KanR): Yeast-two-hybrid vector with C-terminal MCS after Gal4 DNA binding domain (Gal4DBD/Gal4BD)
Parts for N'-Gal4AD-linker-Pif3 construction:
BBa_K365000 in pSB1C3 (CamR): Pif3(100NT)	pGADT7 AD (AmpR): Yeast-two-hybrid vector with C-terminal MCS after Gal4 transcription activation domain (Gal4AD)
Oligopeptide linkers for linkage of two functional independent protein domains:
BBa_K365005 in pSB1C3 (CamR): 20 amino acids long linker with RFC25 pre- and suffix	BBa_K243006 in BBa_K157000 (AmpR): 12 amino acids long linker (Gly-Gly-Ser-Gly)x3
Synthetical promoter constructs for LexA based Y2H:
BBa_K165055 in BBa_J63009 (AmpR): LexA binding sites + mCYC + Kozak + YFPx2 + ADH1 terminator	BBa_K165031 in pSB1AK3 (AmpR, KanR): LexA binding sites + mCYC

Y190 S. cerevisiae: With an incolution loop under sterile conditions the yeast colonies from the plates were transferred by dilution plating on new YPD plates. Attempts were made to take all the colonies to have a multiclonal plate.

Genotype:
MATa	ura3-52	his3-200	ade2-101	lys2-801	trp1-901	leu2-3, 112	gal4Δ	gal80Δ	cyhR2	LYS2 : : GAL1(UAS)-HIS3(TATA)-HIS3	MEL1	URA3 : : GAL1UAS-GAL1TATA-lacZ
Reporters:
HIS3	lacZ	MEL1
Transformation markers
trp1	leu2	cyhR2

Picking from the overnight transformation of ligated P207+PCR39 product in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment: Picking from the overnight transformation of ligated P207+PCR39 product in E. coli XL1-Blue from the August, 2nd and August, 3rd.

Procedure:

4 colonies from August, 2nd and 4 colonies from August, 3rd were taken. Total: 8 colonies.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C. P207+PCR39 (CamR).

Picking of E. coli XL1-Blue transformed with BBa_K165055

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL1-Blue transformed with BBa_K165055.

Procedure:

2 colonies were taken.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C. BBa_K165055 in BBa_J63009 (AmpR).

Picking of E. coli XL1-Blue transformed with pGADT7 AD

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL1-Blue transformed with pGADT7 AD.

Procedure:

2 colonies were taken.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C. pGADT7 AD (AmpR).

Picking of clones of transformation August, 1st, 2nd and 3rd

Investigator: Jeff

Aim: Picking.

Procedure:

3 or 4 clones were picked for each ligation. Clones containing pYES2-new were put into 4 ml LB with 4 µl of ampillicin stock solution, clones containing pSB1C3 were put into chloramphenicol containing media. Incubation at 37 °C overnight.

Week 9

Limonene (11 Experiments):

Coumaryl (10 Experiments):

Caffeine (5 Experiments):

Constitutive Promoter (10 Experiments):

Light Switchable Promoter (24 Experiments):

Show Details ...

Monday, August 6th

Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR39

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR39

Procedure:

Miniprep was done after manufacturer's protocol for 8 picked colonies. (P285-P292)

Analytical digestion and gelelectrophoresis of miniprep P285-P292

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion with NgoMIV+PstI-HF and gelelectrophoresis of miniprep P285-P292.

Procedure:

Mastermix for NgoMIV+PstI-HF

volume	reagent
22 µl	NEBuffer 4 (10x)
2.75 µl	NgoMIV
2.75 µl	PstI-HF
165 µl	ddH2O
=192.5 µl	TOTAL

Reaction batch

volume	reagent
2,5 µl	Plasmid-DNA (P285-P292)
17,5 µl	Mastermix for NgoMIV+PstI-HF
=20 µl	TOTAL

100 bp ladder DNA ladder	P285	P286	P287	P288	P289	P290	P291	P292	P295	P296	1 kbp ladder DNA ladder
	Corrupt	Ligation successful	Ligation successful	Ligation successful	Ligation successful	Ligation successful	Ligation successful	Ligation successful	please see next subsection	plase see next subsection

Analytical digestion and gelelectrophoresis of miniprep P295, P296

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion with XbaI+PstI-HF and gelelectrophoresis of miniprep P295 and P296.

Procedure:

Digestion reaction batch

volume	reagent
2.5 µl	Plasmid-DNA (P295, P296)
0.25 µl	XbaI
0.25 µl	PstI-HF
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
14.8 µl	ddH2O
=20 µl	TOTAL

100 bp ladder DNA ladder	P285	P286	P287	P288	P289	P290	P291	P292	P295	P296	1 kbp ladder DNA ladder
	Please see last subsection	Please see last subsection	Please see last subsection	Please see last subsection	Please see last subsection	Please see last subsection	Please see last subsection	Please see last subsection	corrupt	corrupt

Analytical digestion and gelelectrophoresis of miniprep P293, P294

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion and gelelectrophoresis of miniprep P2P93, P294 to see whether the enzymes EcoRI and BamHI are working. Because the size of the insert is too short, the backbone is additionally cut with Eco91I (cuts only 1x in the backbone). So digestion were done with EcoRI+Eco91I and BamHI+Eco91I.

Procedure

Reaction batch for P293:

volume	reagent
2.5 µl	Plasmid-DNA (P293)
0.25 µl	EcoRI (Fermentas)
0.25 µl	Eco91I (Fermentas)
2 µl	Buffer 0 (Fermentas)
15 µl	ddH2O
=20 µl	TOTAL

Reaction batch for P294:

volume	reagent
2.5 µl	Plasmid-DNA (P293)
0.5 µl	BamHI (Fermentas)
0.25 µl	Eco91I (Fermentas)
4 µl	Tango-Buffer (10x) (Fermentas)
12.75 µl	ddH2O
=20 µl	TOTAL

100 bp ladder DNA ladder	P293 (digested with EcoRI+Eco91I)	P294 (digested with BamHI+Eco91I)	PCR48	PCR49	P230	P231	1 kbp ladder DNA ladder
	2 DNA strands are visible and have expected length	2 DNA strands are visible and have expected length	Please see next subsection	Please see next subsection	Please see next subsection	Please see next subsection

Analytical digestion and gelelectrophoresis of miniprep P230 and P232

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion and gelelectrophoresis of miniprep P230 and P232 to check whether the oligohybrdization product PCR34 has been successful ligated to pSB1C3 with RFC25 pre- and suffix.

Procedure:

Reaction batch for P230 and P231:

volume	reagent
2,5 µl	Plasmid-DNA (P285-P292)
17,5 µl	Mastermix for NgoMIV+PstI-HF (please see subsection: "Analytical digestion and gelelectrophoresis of miniprep P285-P292 ")
=20 µl	TOTAL

100 bp ladder DNA ladder	P293	P294	PCR48	PCR49	P230	P231	1 kbp ladder DNA ladder
	Please see next subsection	Please see next subsection	Please see next subsection	Please see next subsection	91 bp long insert seems to be visible after manual gain of signal	91 bp long insert seems to be visible after manual gain of signal

To be sure, one has to sequence this with the iGEM primer VF2 (O68) and VR (O69).

Analytical gelelectrophoresis of PCR48 and PCR49

Investigator: Jeff, Dennis

Aim of the experiment: Analytical gelelectrophoresis of PCR48 and PCR49 to check whether the PCR has been successful.

Procedure:

100 bp ladder DNA ladder	P293	P294	PCR48	PCR49	P230	P231	1 kbp ladder DNA ladder
	Please see next subsection	Please see next subsection	PCR was successful	PCR was successful	Please see next subsection	Please see next subsection

Preperative digestion of P289

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P289 in order to fuse insert (LexA with RFC25 pre- and suffix) into the N-terminus of 20aa linker in pSB1C3 (P206). Intermediate construction: N'-20aaLinker-LexA-C'. Final construction should be N'-SV40NLS-PhyB(642NT/908NT)-20aaLinker-LexA-C'.

Procedure:

Reaction batch:

volume	reagent
20 µl	Plasmid 289
4 µl	NEBuffer 4 (10x)
2 µl	NgoMIV (10 U/µl)
1 µl	PstI-HF (20 U/µl)
11 µl	ddH2O
=40 µl	TOTAL

Preperative gelelectrophoresis was done the next day

Extraction of ADH1-Promoter, CYC1-Terminator, TEF1-Promoter

Investigator: Georg

Aim of the experiment: Miniprep of overnight cultures of transformed E. coli XL1-Blue

Procedure:

Miniprep was done after manufactuer's protocol for 3x3 colonies.

PCR of TEF1-Terminator, TEF2-Promoter and ADH1-Terminator with PCR-purification

Investigator: Georg

Aim of the experiment: Amplification of TEF1-Terminator, TEF2-Promoter from genomic DNA of Saccharomyces cerevisiae and ADH1-Terminator from yeast Vector PGADT7 AD

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer
1 µl	10 µM Reverse Primer
0.25 µl	OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
1,3µl P237	1µl P98
33.75 µl	dd water
50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	56 °C	1 min
	68 °C	2 min
Final extension	68 °C	5 min
Hold	4 °C	1 h

Afterwards, the PCR-product was purified by Quiaquick PCR purification KIt
The success of the PCR was tested by analytical gelelectrophoresis

Preparative digestion of PCR products and TEF1-,ADH1-Promoter with XbaI and PstI

Investigator: Georg

Mastermix for XbaI+PstI-HF

volume	reagent
12 µl	NEBuffer 4 (10x)
3 µl	XbaI
3 µl	PstI-HF
1,2 µl	BSA 100x
20,8 µl	ddH2O
=40 µl	TOTAL

Mastermix for XbaI+PstI-HF

volume	reagent
15 µl	NEBuffer 4 (10x)
3 µl	XbaI
3 µl	PstI-HF
1,5 µl	BSA 100x
27,5 µl	ddH2O
=50 µl	TOTAL

Ligation of lavendula LS and citrus LS with pSB1C3 and pYES

Investigator: Andrea

Procedure

Substance	Volume
P175	1 µl (~100 ng vector dna)
PCR 42 RL	0.8 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	15.7 µl
TOTAL	=20 µl

Miniprep of Ligation of PCR1 and PCR2 in P133 or P175

Investigator: Andrea

Using a Quiagen Miniprep kit. The miniprep products were named P266-P284.

The resulting plamid-concentrations (measured with nanodrop) were

P 266: 1,3 ng/µl
P 267: 0,2 ng/µl
P 268: 1,0 ng/µl
P 269: 13,5 ng/µl
P 270: 10,3 ng/µl
P 271: 12,1 ng/µl
P 272: 14,7 ng/µl
P 273: 12,8 ng/µl
P 274: 13,2 ng/µl
P 275: 9,4 ng/µl
P 276: 8,5 ng/µl
P 277: 12,4 ng/µl
P 278: 10,2 ng/µl
P 279: 7,1 ng/µl
P 280: 5,7 ng/µl
P 281: 8,0 ng/µl
P 282: 8,6 ng/µl
P 283: 31,4 ng/µl
P 284: 12,6 ng/µl

PCR of Schwab plasmid Quickchange-DNA to amplify gene for lavendula LS

Instructor: Andrea

Aim: PCR of Schwab plasmids after Quickchange-Mutagenesis with primers which were designed to amplify the lavendula LS gene and to add RFC25 restriction sites.

3 different primer combinations were used:

1. O33/O37

2. O34/O37

3. O35/O37

Each primer combination was used for plasmid DNA amplification of P283.

PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer
1 µl	10 µM Reverse Primer
0.25 µl	OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
3 µl	Plasmid DNA P283
33.75 µl	dd water
50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	50 °C	30 s
	68 °C	1,75 min
Final extension	68 °C	5 min
Hold	4 °C	1 h

Preparation of SC-U medium with 2% glucose (300ml) or galactose (700 ml) for expression in Saccharomyces cerevisiae

Investigator: Daniela

1 l medium:

One alliquot (50 ml) of amino acis prepared by Alois Bräuer was used
6.7 g yeast nitrogen base
850 ml ELGA water
after dissolving, the solution was divided into 270 ml and 630 ml
autoclaving

Sugar solution were prepared separately:

6 g glucose were dissolved in 30 ml ELGA water
14 g galactose were dissolved in 70 ml ELGA water
autoclaving

After autoclaving:

30 ml of glucose solution were added to 270 ml SC-U medium
70 ml of galactose solution were added to 630 ml SC-U medium

Inoculation of Saccharomyces cerevisiae colonies of transformation products from August, 3rd

Investigator: Daniela

Aim of the experiment: First step of the expression protocol in Saccharomyces cerevisiae

Inoculation of a single colony of Saccaromyces cerevisiae transformed with enzymes PAL+/-, 4CL+/-, CHS+/-, OMT+/-, APT and the positive control GFP in pYES, respectively in 15 ml of SC-U medium with 2% glucose. Incubation at 30°C over night.

Tuesday, August 7th

Plating of received E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003

Investigator: Jeff

Aim of the experiment: The received biobricks were already transformed in E. coli and were in an agar stabs. These E. coli cells were transferred with an inoculation loop on antibiotic selection plates and were incubated over night. The received biobricks were: BBa_K181000 (This is the PcyA gene, known to convert biliverdin to phycocyanobilin, codon optimized for S. cerevisiae (baker's yeast). ), BBa_K365002 (This part consists in the first 908 amino-acids of Phytochrome B from A. thaliana.) and BBa_K365003 (This part consists in the first 642 amino-acids of Phytochrome B from A. thaliana.).

Procedure:

Bacterias containing plasmids with biobricks were transferred with a sterile inoculation loop on antibiotic plates and were incubated at 37 °C overnight.

The biobricks were: BBa_K181000 in BBa_J63010 (AmpR), BBa_K365002 in pSB1C3 (CamR) and BBa_K365003 in pSB1C3.

Preperative gelelectrophrosis of digested P289

Investigator: Jeff, Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P289 in order to fuse insert (LexA with RFC25 pre- and suffix) into the N-terminus of 20aa linker in pSB1C3 (P206). Intermediate construction: N'-20aaLinker-LexA-C'. Final construction should be N'-SV40NLS-PhyB(642NT/908NT)-20aaLinker-LexA-C'.

Procedure:

Gelelectorphoresis was performed on a 1% low-melting agarose gel at 70 for 1.5 h.

DNA strand at about 600-700 bp was cut out

Cut out band was purified with gel extraction kit from Qiagen after manufacturer's protocol.

Ligation of P206+P310

Investigator: Jeff, Dennis

Aim of the experiment: Ligation of P206+P310

Procuedure: Reaction batch

Substance	Volume
P206	1.7 µl (~100 ng vector DNA)
P310	8.5 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	7.3 µl
TOTAL	=20 µl

Preperative digestion and gelelectrophrosis of P123 and P80

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P80 and P123 in order to fuse insert (Pif3 with RFC25 pre- and suffix) of P80 into the C-terminus of 20aa linker in pSB1C3 (P123). Intermediate construction: N'-Pif3-20aaLinker-C'. Final construction should be N'-Pif3-20aaLinker-Gal4AD-C'.

Procedure:

Reaction batch for P123:

volume	reagent
20 µl	Plasmid-DNA P123
4 µl	NEBuffer 4 (10x)
1 µl	EcoRI-HF (20 U/µl)
2 µl	NgoMIV (10 U/µl)
13 µl	ddH2O
=40 µl	TOTAL

Reaction batch for P80:

volume	reagent
20 µl	Plasmid-DNA P80
4 µl	NEBuffer 4 (10x)
0.44 µl	BSA (100x)
1 µl	EcoRI-HF (20 U/µl)
1 µl	AgeI (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Gelelectorphoresis was performed on a 1% low-melting agarose gel at 70 for 1.5 h.

DNA strand at about 300 bp from P80 was cut out. And the band from P123 at about 2.1 kbp was cut out.

Cut out bands were purified with gel extraction kit from Qiagen after manufacturer's protocol.

P80 digested with EcoRI-HF+AgeI-HF	100 bp ladder DNA ladder	P123 digested with EcoRI-HF+NgoMIV	1 kbp ladder DNA ladder
	Gel OK		Gel OK

Ligation of P311+P312

Investigator: Jeff

Aim of the experiment: Ligation of P311+P312

Procuedure: Reaction batch

Substance	Volume
P312	1.92 µl (~100 ng vector DNA)
P311	6.38 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	9.2 µl
TOTAL	=20 µl

Picking of received E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003

Investigator: Jeff

Aim of the experiment: Picking of received E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003.

Procedure:

For each biobrick 1 coloniy was taken with a pipette tip and transferred into a cell-culture tube with 4 of LB-medium and antibiotics (CamR for BBa_K365002 and BBa_K365003, AmpR for BBa_K181000).

These 3 tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Preparative restriction digest of PCR 56,57,58 (lavendula LS) and PCR 42,43 (citrus LS)

Investigator: Lara

Aim: Prepare digested PCR fragments for further ligation into pYES and pSB1C3.

volume	reagent
25 µl	PCR products
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
17.5 µl	ddH2O
=50 µl	TOTAL

A mastermix for 16 reactions was produced.
PCR products were digested at 37 °C for 3 hours.

P187 was used as positive control for restriction digest:

3 µl p187 + 15 µl of Mastermix (see above)

Gelelectrophoresis:

Gel 1:

1. Gene ruler 1 kb

2. PCR 42

3. PCR 43

5. P187

Gel 2:

1. Gene ruler 1 kb

2. PCR 56

3. PCR 57

4. PCR 58

Digested PCR products (PCR 42 RL, PCR 43 RL, PCR 56 RL, PCR 57 RL, PCR 58 RL) are stored in the iGEM PCR product box at -20°C.

RL = ready for ligation

concentrations:

PCR 42: 102 ng/µl

PCR 43: 60 ng/µl

PCR 56: 35 ng/µl

PCR 57: 34 ng/µl (consumed)

PCR 58: 40 ng/µl

Analytical restriction digest of ligation products after miniprep

Investigator: Lara

Aim: Check ligation of PCR 1 and PCR 2 into pYES and pSB1C3.

volume	reagent
20 µl	miniprep products
2.3 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
0.25 µl	XbaI (20 U/µl)
0.25 µl	Pst1-HF (20 U/µl)
=23 µl	TOTAL

Incubation at 37°C for 2 h.

Gelelectrophoresis:

Ligation of lavendula LS and citrus LS with pSB1C3 and pYES

Investigator: Lara

Aim: Ligate both lavendula and citrus limonene synthase (with all primer combinations -> with or without consensus sequence) with pSB1C3 and pYES.

Procedure

PCR 42 RL in pYES (p175)

Substance	Volume
P175	1 µl (~100 ng vector dna)
PCR 42 RL	0.8 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	15.7 µl
TOTAL	=20 µl

PCR 42 RL in pSB1C3 (p133)

Substance	Volume
P133	2.5 µl (~100 ng vector dna)
PCR 42 RL	2.5 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	12.5 µl
TOTAL	=20 µl

PCR 43 RL in pYES (p175)

Substance	Volume
P175	1 µl (~100 ng vector dna)
PCR 43 RL	1.5 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	15.0 µl
TOTAL	=20 µl

PCR 43 RL in pSB1C3 (p133)

Substance	Volume
P133	2.5 µl (~100 ng vector dna)
PCR 43 RL	4 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	11 µl
TOTAL	=20 µl

PCR 56 RL in pYES (p175)

Substance	Volume
P175	1 µl (~100 ng vector dna)
PCR 56 RL	2 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	14.5 µl
TOTAL	=20 µl

PCR 56 RL in pSB1C3 (p133)

Substance	Volume
P133	2.5 µl (~100 ng vector dna)
PCR 56 RL	6 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	9 µl
TOTAL	=20 µl

PCR 57 RL in pYES (p175)

Substance	Volume
P175	1 µl (~100 ng vector dna)
PCR 57 RL	2 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	14.5 µl
TOTAL	=20 µl

PCR 57 RL in pSB1C3 (p133)

Substance	Volume
P133	2.5 µl (~100 ng vector dna)
PCR 57 RL	6 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	9 µl
TOTAL	=20 µl

PCR 58 RL in pYES (p175)

Substance	Volume
P175	1 µl (~100 ng vector dna)
PCR 58 RL	2 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	14.5 µl
TOTAL	=20 µl

PCR 58 RL in pSB1C3 (p133)

Substance	Volume
P133	2.5 µl (~100 ng vector dna)
PCR 58 RL	6 µl (~3x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	9 µl
TOTAL	=20 µl

Negative control/pYES (p175)

Substance	Volume
P175	1 µl (~100 ng vector dna)
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	16.5 µl
TOTAL	=20 µl

Negative control/pSB1C3 (p133)

Substance	Volume
P133	2.5 µl (~100 ng vector dna)
T4 ligase	0.5
T4 ligase buffer	2 µl
ddH2O	15 µl
TOTAL	=20 µl

ligation over night at 16 °C (waterbath).

Eppis with Ligation products are stored in two 50 ml Falcon tubes at -20°C (lowest drawer)!

Induction of PAL,4CL,CHS,OMT,APT and GFP in pYES in S. cerevisiae in SC-U medium with 2% galactose

Investigator: Mary, Daniela

Aim of the experiment: Expression of all enzymes in Saccharomyces cerevisiae.

enzyme	OD600	volume to be pelleted [ml]
PAL+	3.246	6.2
PAL-	3.604	5.5
4CL+	3.875	5.2
4CL-	4.0	5.0
CHS+	3.685	5.43
CHS-	6.68	5.43
OMT+	3.795	5.27
OMT-	4.085	4.896
APT	3.415	5.86
GFP	3.855	5.188

Incubation at 30 °C over night.

Preparation of solutions for generating chemo competent E.Coli- cells

Investigator: Roman

Procedure:

Required solutions (for a 24ml suspension of competent cells)

0,1 M MgCl2
0,05 M CaCl2
0,05 M CaCl2, 15% v/v glycerine

Prepared volumes:

30 ml CaCl2, 15% v/v glycerine; 0,22g CaCl2 were mixed with 4,5 ml glycerine and 25,5 ml bidestillated water and autoclaved
500 ml MgCl2; 10,17g MgCl2 were mixed with 500 ml bidestillated water and autoclaved
250 ml CaCl2; 1,84g CaCl2 were mixed with 250 ml bidestillated water and autoclaved

Preparation of competent cells see next day.

Wednesday, August 8th

Miniprep of overnight culture of E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of overnight culture of E. coli containing biobricks BBa_K181000, BBa_K365002 and BBa_K365003.

Procedure:

Miniprep with Kit from Qiagen after manufacturer's protocol

Preperative digestion and gelelectrophoresis of P27 and P315

Investigator: Jeff, Dennis

Aim of the experiment:

Procedure:

Reaction batch for P27:

volume	reagent
25 µl	Plasmid-DNA P27
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
8.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch for P315:

volume	reagent
25 µl	Plasmid-DNA P27
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
8.6 µl	ddH2O
=40 µl	TOTAL

P27 digested with XbaI+PstI-HF BBa_I15008: Heme oxygenase 1 (HO1)	100 bp DNA ladder	P315 digested with XbaI+PstI-HF BBa_K181000: PcyA	1 kbp DNA ladder
Backbone and insert correct		Backbone and insert correct

Analytical digestion and gelelectrophoresis of P313 BBa_K365002: PhyB(908NT)and P314 BBa_K365003 : PhyB(642NT)

Investigator: Jeff, Dennis

Aim of the experiment:

Procedure:

Reaction batch for P313 (BBa_K365002):

volume	reagent
2.5 µl	Plasmid-DNA P313
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
0.25 µl	XbaI (20 U/µl)
0.25 µl	PstI-HF (20 U/µl)
14.8 µl	ddH2O
=20 µl	TOTAL

Reaction batch for P314 (BBa_K365003):

volume	reagent
2.5 µl	Plasmid-DNA P313
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
0.25 µl	XbaI (20 U/µl)
0.25 µl	PstI-HF (20 U/µl)
14.8 µl	ddH2O
=20 µl	TOTAL

100 bp DNA ladder	P313 digested with XbaI+PstI-HF (BBa_K365002: PhyB(908NT)	P314 digested with XbaI+PstI-HF (BBa_K365003: PhyB(642NT)	1 kbp DNA ladder
	Backbone and insert correct	Backbone and insert correct

Transformation of E. coli XL1-Blue with ligation products P206+P310 and P312+P311

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P206+P310 (N'-20aaLinker-LexA-C' construction) and P312+P311 (N'-Pif3-20aaLinker-C')

Procedure:

Transformation was performed after standard transformation protocol from the lab.

Transformated E. coli XL1-Blue cells were plated on antibiotic plates and were put at 37 °C overnight.

P206+P310 (CamR), P312+P311 (CamR)

Picking of E. coli XL1-Blue colonies containing BBa_K365000

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL1-Blue colonies containing BBa_K365000 to a miniprep on the nextday from the overnight culture.

Procedure:

3 colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Miniprep of ligation products of transformation from August 3rd

Investigator: Lara

Aim: Get transformed plasmids for further analytical restriction digest to check whether ligation worked.

Procedure: Miniprep was done using Qiagen miniprep kit.

PCR1/p175 clone 1: 200 ng/µl
PCR1/p175 clone 2: 260 ng/µl
PCR1/p175 clone 3: 460 ng/µl
PCR1/p175 clone 4: 450 ng/µl
PCR2/p175: 222 ng/µl
PCR2/p133 clone 1: 145 ng/µl
PCR2/p133 clone 2: 150 ng/µl
PCR2/p133 clone 3: 140 ng/µl
PCR2/p133 clone 4: 510 ng/µl

Eppis containing miniprep products were stored in 50 ml Falcon tubes at the lowest drawer of -20°C. --> will be thrown away in case ligation hasn't worked.

Analytical restriction digest of miniprep products

Investigator: Lara

Aim: Analytical restriction digest to check whether ligation of Tuesday, July 31st has worked.

volume	reagent
2.5 µl	plasmid DNA
0.25 µl	Xba1
0.25 µl	Spe1
2 µl	NEBuffer 4
0,2 µl	BSA (100x)
14.8 µl	ddH2O

Incubation for 1.5 h at 37°C.

Analytical Gel

1. Standard (1 kb Gene Ruler)

2. PCR1/p175 clone 1

3. PCR1/p175 clone 2

4. PCR1/p175 clone 4

5. PCR1/p175 clone 3

6. PCR2/p175

7. PCR2/p133 clone 1

8. PCR2/p133 clone 2

9. PCR2/p133 clone 3

10.PCR2/p133 clone 4 --> successful!

Transformation of ligation products from ligation of August 7th

Investigator: Lara

Aim: Transform E.coli XL 1 blue with ligation products to produce colonies containing plasmid DNA.

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
adding of 5 µl of ligation products
incubation for 30 min on ice
heat shock for 5 min at 37 °C
adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 60 min
plating of 100 µl of the cells on an Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133)
sedimentation of the leftover in a centrifuge (30 - 60 sec, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Cell lysis of S. cerevisiae

Investigator: Mary,Daniela

Aim of the experiment:Receive (hopefully) expressed enzymes.

The protocol 'Expression Hefe' (Dropbox) was used. If you want to repeat the experiment please read comments before you start.

You should make a glycerol stock of clones picked. You should as well take a sample of the uninduced yeast and do a cell lysis to be able to compare the induced and uninduced status.

Preparation of sodium phosphate buffer (50 mM):

1 M Na2HPO4x2H2O (M = 177.99 g/mol): 1.7799 g dissolved in 10 ml ELGA water
1 M NaH2PO4x2H2O (M = 156.01 g/mol): 0.468 g dissolved in 3 ml ELGA water
8.095 ml Na2HPO4 and 1.905 ml NaH2PO4 and 190 ml ELGA water were mixed -> pH should be 7.5 but in our case it wasn't. Therefore we used all of the Na2HPO4, but could only achieve an pH of 7.47.

Preparation of PMSF (100 mM)->solution is in the fridge:

0.0174 g were dissolved in 1 ml isopropanol (techn.)

Preparation of breaking buffer:

11.25 ml sodium phosphate buffer (50 mM)
750 µl Glycerol (80%)
24 µl EDTA

Preparation of breaking buffer with PMSF:

6 ml of breaking buffer
60 µl of PMSF (100 mM)

Preparations for SDS gel the next day:

The absorption A280 was measured with Nano Drop. The SDS gel should be loaded with 30 µg protein, each assay was filled up with buffer to a total volume of 10 µl. 2.5 µl 5xLaemmlired were added and all assays were denatured at 95 °C for 5 min.

enzyme	concentration [mg/ml] (A280)	concentration of 1:10 dilution [mg/ml] (A280)	volume of 1:10 dilution with 30 µg protein [µl]
PAL+	64.024	7.946	3.78
PAL-	61.140	8.605	3.486
4CL+	85.65	9.459	3.17
4CL-	54.166	7.443	not applied on the gel
CHS+	65.338	6.045	4.96
CHS-	51.167	6.135	4.89
OMT+	49.128	5.453	5.5
OMT-	62.074	4.193	7.15
APT	42.554	4.787	6.27
GFP	36.443	4.247	7.06

Preparation chemocompetent E.Coli- cells

Investigator: Roman, Simon

Operational sequence:

The competent cells were prepared as described in the protocoll:

600ml LB medium were inoculated with 6ml of an E.Coli XL1 blue overnight culture and grown to an OD550 of 0,67
centrifugation and washing of the cells as described in the protocol
cells were aliquoted as 100µl suspensions in the cold room
storage at -80°C

Thursday, August 9th

Gelextraction of PCR 50-55 and P297-P302

Investigator: Georg

Gelextraction was done according to Quiaquick gelextraktion protocoll

Nanodrop measurement

Investigator: Georg

PCR products 50-55 (ADH1-T, TEf1-T, TEF2-P) and P297-302 (TEF1-P, ADH1-P) were measured with Nanodrop
ADH1-T: 22,4
TEF2-P: 7,4
TEF1-P: 16,8
ADH1-P: 52,6

Investigator: Georg

Ligation of TEF1-P, TEF2-P ADH1-T, TEF1-T and ADH1-T and pYESII-Tum

Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
3,48 µl	P132 (psb1c3 33,5 ng/µl)
2 µl	10x T4-ligase buffer
4,52 µl	TEF1-P (16,8 ng/µl)
9,5 µl	dd H20
=20µl	TOTAL

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
1,46 µl	P132 (psb1c3 33,5 ng/µl)
2 µl	10x T4-ligase buffer
6,54 µl	TEF2-P (7,4 ng/µl)
9,5 µl	dd H20
=20µl	TOTAL

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
3,42 µl	P132 (psb1c3 33,5 ng/µl)
2 µl	10x T4-ligase buffer
4,52 µl	ADH1-P (52,6 ng/µl)
9,5 µl	dd H20
=20µl	TOTAL

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
0,94 µl	P132 (psb1c3 33,5 ng/µl)
2 µl	10x T4-ligase buffer
7,06 µl	TEF1-T (3,1 ng/µl)
9,5 µl	dd H20
=20µl	TOTAL

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
4,44 µl	P132 (psb1c3 33,5 ng/µl)
2 µl	10x T4-ligase buffer
4,44 µl	ADH1-T (22,4 ng/µl)
9,5 µl	dd H20
=20µl	TOTAL

Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
8 (=100 ng)	pYESII (12,8 ng/µl)
2	10x T4-ligase buffer
2 µl	50% PEG 4000
7,5 µl	dd H20
=100µl	TOTAL

From these ligation batches, overnight reactions were generated with negative control.

PCR amplification of a fragment of P313

Investigator: Roman

Aim of experiment: Amplification of wanted fragment

Operational Sequence:

PCR- reaction batch was prepared as follows:

substrate	volume in µl
ddH2O	35,75
One Taq Standard Reaction Buffer (5x)	10
Plasmid template (p313)	1
Primer O70 (10 µM)	1
Primer O72 (10 µM)	1
dNTP (10 mM)	1
Polymerase One Taq	0,25

Negative control was prepared the same way, with 1 µl ddH2O instead of plasmid template.

PCR temperature program:

initial heating: 94°C for 30s
30 cycles
denaturation: 94°C for 30s
annealing: 67°C for 60s
elongation: 68°C for 3 min
final elongation: 68°C for 5 min
4°C

Afterwards, the PCR reaction tubes were stored over night in the fridge at 4 °C

Miniprep of picked E. coli XL1-Blue containing BBa_K365000

Investigator: Dennis

Aim of the experiment: Miniprep of picked E. coli XL1-Blue containing BBa_K365000. From those minipreps PCRs should be done to introduce RFC25 pre- and suffixes and MfeI and BamHI restriction sites.

Procedure:

Miniprep was performed with Qiaprep Spin miniprep kit from Qiagen.

Miniprep was performed after manufacturer's protocol.

Preperative digestion and gelelectrophoresis of P324

Investigator: Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P324 for fusion protein construction the plasmid containing the phytochrome interacting factor 3 including the RFC25 pre- and suffix was digested with NgoMIV and PstI-HF.

Procedure:

Reaction batch:

volume	reagent
20 µl	Plasmid-DNA Pxxx
4 µl	NEBuffer 4 (10x)
2 µl	NgoMIV (10 U/µl)
1 µl	PstI-HF (20 U/µl)
13 µl	ddH2O
=40 µl	TOTAL

After 2-3 h of incubation time at 37 °C the reaction mix was mixed with 4.44 µl DNA running buffer (10x) and was pipetted into a gelpocket of an 1% low-melting agarose gel.

The gel was running for about 1 at 80 V

Then the gel extraction kit from Qiagen was used for extracting the linearized insert from the agarose gel.

Picking from the overnight transformation of ligated P206+P310 product and P312+P311 product in E. coli XL1-Blue

Investigator: Dennis

Aim of the experiment: Picking from the overnight transformation of ligated P206+P310 product and P312+P311 product in E. coli XL1-Blue from August, the 8th.

Procedure:

5 colonies from P206+P310 transformated cells and 5 colonies from P312+P311 transformated cells were picked.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of colonies of transformation (August 8th)

Investigator: Lara

Aim: Get cells for miniprep for further analytical restriction digest to check whether ligation has worked.

Procedure: Picking of 3 clones each of PCR42/p175, PCR43/p175, PCR56/p175, PCR57/p175, PCR58/p175 into 4 ml LB with Amp and PCR42/p133, PCR43/p133, PCR56/p133, PCR57/p133, PCR58/p133 into 4 ml with Chlp. Inbucation at 37°C (shaker) over night.

SDS-PAGE of crude protein extract after induced expression of PAL, 4CL, CHS, OMT, APT and GFP in yeast

Investigator: Daniela

Aim of the experiment: Getting the right concentration of protein for the western blot.

The preparation of the samples was already described on August, 8th.

12 % gel
6 µl Unstained Protein MW Marker (Thermo Scientific)
12.5 µl sample

Mass of enzymes:

PAL = 76.880 kDa
4CL = 61.053 kDa
CHS = 42.713 kDa
OMT = 39.265 kDa
APT = 45.481 kDa

The enzymes of the coumaroyl pathway were not detectable within the other proteins. However the gel looks good, therefore the same concentrations were used for the western blot.

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast

Investigator: Daniela

Aim of the experiment: Detecion of enzymes via Strep-tag

SDS-PAGE:

The supernatant of the lysis reaction (see August, 8th) was diluted 1:10 with ELGA water. The absorption A280 was measured with Nano Drop. The SDS gel should be loaded with 30 µg protein, each assay was filled up with buffer to a total volume of 10 µl. 2.5 µl 5xLaemmlired were added and all assays were denatured at 95 °C for 5 min.

enzyme	concentration of 1:10 dilution [mg/ml] (A280)	volume of 1:10 dilution with 30 µg protein [µl]
PAL+	8.585	3.49
PAL-	7.824	3.83
4CL+	10.218	2.94
CHS+	12.875	2.33
CHS-	7.245	4.14
OMT+	8.158	3.68
OMT-	5.002	6
APT	5.15	5.82
GFP	4.805	6.24

12 % gel
120 V, 1.5 h

Blotting:

blotting of proteins on a nitrocellulose membrane (Whatman)
50mA, 1 h

Blocking:

wash 3x5min with PBS-T0.1
the membrane is blocked over night at 4 °C on a shaking device

Retransformations with pSB1C3

Investigator: Roman

Aim of experiment: Aim of the experiment was on the one hand to fill up the stock of usable pSB1C3 for both, the caffeine and the whole team. On the other hand, the experiment was used as a test for previously prepared competent E.Coli cells

Operational sequence: The used vectors for the transformations were pSB1C3 RFC25 (p123), and pSB1C3 containing CHS- from the coumaroyl group (p136). Vector lengths are 2070 bps and xxx bps, respectively).

Transformations:

Transformation of (old) chemo competent e.coli cells, used up to now, and the newly prepared with p123
Transformation of the new chemo competent e.coli cells with p136 with two slightly different methods:
- as described in previous protocolls, with an heat shock at 37°C for 5 minutes
- with an heat shock at 42°C for 30 seconds, followed by an incubation on ice for 30 minutes (before the cells being incubated with LB- medium)

The reaction batches were plated out on chloramphenicol containing LB- agar plates (both, unconcentrated and concentrated, i.e. resuspended in ca. 100 µl LB medium). Plates were incubated over night at 37°C.

Friday, August 10th

Transformation of overnight ligation with TEF1-P, TEF2-P, TEF1-T, ADH1-P, ADH1-T and pYE2II-TUM

Investigator: Georg

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of ligation product was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on chloramphenicol, or ampicillin plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

PCR of TEF1-T and TEF2-P from Saccharomyces cerv. genome

Investigator: Georg

Procedure:

Reaction batch for PCR:

volume	reagent
4,3 µl	P237 (Yeast genome)
35 µl	5x One Taq St. Reaction buffer (NEB)
3,5 µl	10 mM dNTPs
3,5 µl	O62/10
3,5 µl	O63/10
0.875 µl	Taq Polym. (NEB)
124,32 µl	H20
=175 µl	TOTAL

Procedure:

Reaction batch for PCR:

volume	reagent
4,3 µl	P237 (Yeast genome)
35 µl	5x One Taq St. Reaction buffer (NEB)
3,5 µl	10 mM dNTPs
3,5 µl	O64/10
3,5 µl	O65/10
0.875 µl	Taq Polym. (NEB)
124,32 µl	H20
=175 µl	TOTAL

2x3 PCR reactions were mixed and PCR was run at the following conditions:
30 sec, 94 C Initial Denaturation
(30 Cycles) 94 C, 30 sec.
(30 Cycles) 57,5, C 30 sec.
(30 Cycles) 68 C, 1 min
Final extension 68 C, 10 min
Hold 4 C

PCR-Purification

Investigator: Georg

PCR-Purification was accomplished according to Quiaquick PCR-purification protocoll

Analytical gel of purified PCR-Products

PCR was succesfull

Analytical gelelectrophoresis of PCR product of P313 to introduce RFC25 pre- and suffix

Investigator: Roman

Aim of the experiment: Analytical gelelectrophoresis of PCR product of P313 to introduce RFC25 pre- and suffix to see wether the PCR was successful.

Procedure:

The PCR product was first purificated with PCR purification kit from Qiagen

Analytical gelelectrophoresis was performed at 90 V for ~1 h.

PCR was successful!

(3 µl of PCR solution were analyzed on gel)

Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P206+P310 and ligated P312+P311

Investigator: Dennis, Roman

Aim of the experiment: Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P206+P310 and ligated P312+P311.

Procedure:

Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Transformation analysis and preparation of over- night cultures

Investigator:Roman

Aim of the experiment: Analysis of the transformation with old and new chemocompetent E.Coli- cells and preparation of over night (over weekend, respectively) cultures, to amplificate the vector pSB1C3

Results:

All plates showed a lot of colonies
The concentrated plates were quite overgrown, the unconcentrated ones showed single colonies
no difference could be detected between transformation with 42°C heat shock (followed by 30 min incubation on ice, see previous day) and 37°C heat shock

Newly prepared competent cells seem to work, further investigations (e.g. plating out with different antibiotics), see below.

Operational sequence: Liquid cultures of the following transformants were prepared:

XL1-blue with p123 (old competent cells used)
XL1-blue with p123 (new competent cells used)
XL1- blue with p136

To prepare the over night cultures, 4ml of LB medium containing chloramphenicol (4µl) were inoculated with a pipet- tip and incubated at room temperature over the weekend with 180 rpm.

Plating of newly generated chemocompetent cells with different antibiotics

Investigator: Roman

Aim: Test, if prepared competent cells (untransformed) are sensitive to different antibiotics

Operational sequence:

Used antibiotics:

ampicillin
kanamycin
tetracyclin
chloramphenicol

100µl of untransformed, melted E.Coli- cells were plated and incubated over the weekend at room temperature. No growth should occure.

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast - continued

Investigator: Daniela

Aim of the experiment: Detecion of enzymes via Strep-tag

Detection:

via Streptavidin-AP (1:4000) ->7ml, Streptavidin-AP diluted in PBST0.1
1h incubation, be sure that the whole membrane is covered with Streptavidin-AP solution.

Developing:

15 ml AP-buffer mixed with 45 µl BCIP (50 mg/ml in DMF) and 7.5 µl NBT (75 mg/ml in 70 % DMF)
incubation: about 30 min

Expected bands:

PAL: length: 716, mass = 76,880 kDa

4CL: no strep-tag ->negative control (length: 561, mass = 61.053 kDa)

CHS: length: 390, mass = 42.713 kDa

OMT: length: 352, mass = 39.265 kDa

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

Miniprep

Investigator: Dennis

Minipreps are stored in a disposal bag on the lowest drawer of -20°C.

Saturday, August 11th

Repetition of SDS-PAGE and Western Blot of crude protein extract after induced expression of PAL, 4CL, CHS, OMT, APT and GFP in yeast

Investigator: Ingmar

Aim of the experiment: Execute the Western Blot using the StrepMab Classic antibody in order to test whether the immunospecifity is better. Furthermore one of the first SDS-PAGEs was done with an increased protein concentration.

Operational sequence

To test wheather the increased protein concentrations lead to overloaded bonds, two SDS-PAGE gels which have been stained with Coomassie brilliant blue afterwards were run parallely to the ones for the Western blots.
The preparation of the samples was executed as describes on August, 8th.
12 % SDS-PAGE gel, width of the collection gel: 2 mmm
6 µl Unstained Protein MW Marker (Thermo Scientific) for the staining with Coomassie brilliant blue and 6 µl Prestained Protein MW Marker (Thermo Scientific)for the western blots.
15 µl sample
SDS gel with 30 µg protein of each sample:

Mass of enzymes:

PAL = 76.880 kDa
4CL = 61.053 kDa
CHS = 42.713 kDa
OMT = 39.265 kDa
APT = 45.481 kDa

SDS gel with maximal protein concentration using 15 µl of the crude cell extract:

Mass of enzymes:

PAL = 76.880 kDa
4CL = 61.053 kDa
CHS = 42.713 kDa
OMT = 39.265 kDa
APT = 45.481 kDa

The enzymes of the coumaroyl pathway were not detectable within the other proteins. However the gels look good, therefore the same concentrations were used for the western blot.

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast

Investigator: Ingmar

Aim of the experiment: Detecion of enzymes via Strep-tag using Strep MAB classic

SDS-PAGE:

Two separate approaches were executed: First, one Wester Blot was prepared using 30 µg protein of each sample as described by Daniela Dichtler on 09.08.2012. Second, a maximal protein concentration was used by utilizing undiluted crude cell extract. 10 µl of diluted an undiluted cell extract supernatant were mixed with 2.5 µl 5xLaemmlired and incubated at 95 °C for 5 min.

12 % SDS-PAGE gel, width of the collection gel: 2 mmm
6 µl Prestained Protein MW Marker (Thermo Scientific)
12.5 µl sample
90 V as long as the samples cross the collecting gel, afterwards 110 V until the dye is close to the lower end of the gel.

Blotting:

blotting of proteins on a nitrocellulose membrane (Whatman) according to the protocol of Nadine Kallweit
50mA per gel, 1 h

Blocking:

wash 3x7.5min with PBS-T0.1
the membrane is blocked over night at 4 °C on a shaking device with 3 % BSA in PBS-T0.1

Sunday, August 12th

Western Blot of PAL, 4CL, CHS, OMT, APT and GFP expressed in yeast - continued

Investigator: Ingmar

Aim of the experiment: Detecion of enzymes via Strep-tag

Detection:

wash 3x 7,5 moin with PBS-T0.1
1h incubation with Strep MAB-classic primary antibody (10 ml per gel)
wash 3x 7,5 moin with PBS-T0.1
1h incubation with DAKO rabbit anti-mouse secondary antibody wich is conjugated to alkaline peroxidase(10 ml per gel)

Developing:

wash 2x 5 min with PBS-T 0.1 and 2x 5 min with PBS. Brandish the membranes afterwards for 2 min in AP-buffer.
Add 15 ml AP-buffer mixed with 45 µl BCIP (50 mg/ml in DMF) and 7.5 µl NBT (75 mg/ml in 70 % DMF)
Incubation until the bonds become sufficiently visible, here 10-15 min.
Western Blot using diluted samples:

Expected bands:

PAL: length: 716, mass = 76,880 kDa

4CL: no strep-tag ->negative control (length: 561, mass = 61.053 kDa)

CHS: length: 390, mass = 42.713 kDa

OMT: length: 352, mass = 39.265 kDa

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

Western Blot using concentrated samples:

PAL: length: 716, mass = 76,880 kDa

4CL: no strep-tag ->negative control (length: 561, mass = 61.053 kDa)

CHS: length: 390, mass = 42.713 kDa

OMT: length: 352, mass = 39.265 kDa

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

On both gels the desired proteins can not be detected doubtless. Therefore several taks have to be done:

Sequencing of the used genconstructs
Sample taking after variable time after inducton in order to optimizie the amount of desired protein.
Test different blocking techniques for the Western Blot to reduce the background signal.

Week 10

Limonene (16 Experiments):

Coumaryl (6 Experiments):

Thaumatin (5 Experiments):

Caffeine (14 Experiments):

Constitutive Promoter (13 Experiments):

Light Switchable Promoter (41 Experiments):

Show Details ...

Monday, August 13th

Preparative digestion of PCR-Products TEF2-P and TEF1-T

Reaction batch for digestion:

volume	reagent
6 µl	PstI (NEB)
6 µl	XbaI (NEB)
30 µl	NEB-4 buffer
3 µl	100 x BSA (NEB)
105 µl	dd H20
=150 µl	TOTAL

To 25 µl mastermix were 25 µl of PCR-product added

Picking of colonies of psb1c3 with TEF1-t, TEF2-P, ADH1-P und ADH1-t, pyes2-Tum

Investigator: Georg

no colonies of pYES2-TUM
10 colonies of TEF1-T, TEF2-P, 8 from ADH1-P and ADH1-T

Preparative digestion of pYES2

Investigator: Georg

- Reaction batch for digestion:

volume	reagent
20 µl	pYESII
2 µl	SwaI
2 µl	PvuII
4 µl	NEB-3 buffer
0,4 µl	100 x BSA (NEB)
13,6 µl	dd H20
=40µl	TOTAL

Digestion was started with SwaI and BSA, for 3 hours at room temperature. Afterwards PvuII was added and digestion processed at 37 C

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P310 products (P327-P331)

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P310. P327-P331 (N'-Pif3-20aaLinker-C').

Procedure:

Mastermix for analytical digestion with NgoMIV+PstI-HF

volume	reagent
12 µl	NEBuffer 4 (10x)
1.5 µl	NgoMIV
1.5 µl	PstI-HF
90 µl	ddH2O
=105 µl	TOTAL

17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P327, P328, P329, P330, P331.

Incubation for 2 h at 37 °C.

Order of gel-pockets:

100 bp ladder DNA ladder	P327 (digested with NgoMIV+PstI-HF)	P328 (digested with NgoMIV+PstI-HF)	P329 (digested with NgoMIV+PstI-HF)	P330 (digested with NgoMIV+PstI-HF)	P331 (digested with NgoMIV+PstI-HF)	P310 control (before ligation and already digested with NgoMIV+PstI-HF)	1 kbp ladder DNA ladder
	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Control OK!

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P312+P311 products (P332-P336)

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P310. P327-P331 (N'-20aaLinker-LexA-C').

Procedure:

Mastermix for analytical digestion with EcoRI-HF+AgeI-HF

volume	reagent
12 µl	NEBuffer 4 (10x)
1.2 µl	BSA (100x)
1.5 µl	EcoRI-HF
1.5 µl	AgeI-HF
88.8 µl	ddH2O
=105 µl	TOTAL

17.5 µl of the mastermix for EcoRI-HF+AgeI-HF was added to 2.5 µl of plasmid DNA of P332, P333, P334, P335, P336.

Incubation for 2 h at 37 °C.

Order of gel-pockets:

100 bp ladder DNA ladder	P332 (digested with EcoRI-HF+AgeI-HF)	P333 (digested with EcoRI-HF+AgeI-HF)	P334 (digested with EcoRI-HF+AgeI-HF)	P335 (digested with EcoRI-HF+AgeI-HF)	P336 (digested with EcoRI-HF+AgeI-HF)	P311 control (before ligation and already digested with EcoRI-HF+AgeI-HF)	1 kbp ladder DNA ladder
	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Ligation/Fusion was successful!	Control OK!

Preperative digestion of PCR41 (Pif3 100NT)

Investigator: Jeff

Aim of the experiment: Contruction of N'-SV40NLS-Gal4AD-pGADT7 AD linker-Pif3(100NT)-C'.

Procedure:

Reaction batch:

volume	reagent
25 µl	PCR41
5 µl	Buffer G (10x)
2 µl	BamHI (10 U/µl)
2 µl	MfeI (MunI) (10 U/µl)
16 µl	ddH2O
=50 µl	TOTAL

Preperative digestion of PCR48 (Gal4DBD)

Investigator: Jeff

Aim of the experiment: To backup amplificated Gal4DBD with RFC25 pre- and suffix in pSB1C3.

Procedure:

Reaction batch:

volume	reagent
25 µl	PCR48
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
17.5 µl	ddH2O
=50 µl	TOTAL

WRONG DIGESTION, THERE IS NO PstI-HF SITE IN THE PCR PRODUCT! IT SHOULD HAVE BEEN XbaI+AgeI-HF

Preperative digestion of PCR65 (PhyB 908NT)

Investigator: Jeff

Aim of the experiment: To backup amplificated PhyB (908NT) with RFC25 pre- and suffix in pSB1C3.

Procedure:

Reaction batch:

volume	reagent
25 µl	PCR65
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
17.5 µl	ddH2O
=50 µl	TOTAL

WRONG DIGESTION, THERE IS NO PstI-HF SITE IN THE PCR PRODUCT! IT SHOULD HAVE BEEN XbaI+AgeI-HF

Preperative digestion of P292

Investigator: Jeff

Aim of the experiment: Only the backbone of this part is needed; this part including LexA is used because to see if the double digest work. If it doesn't work, there won't be 2 DNA strands. Backbone was cut out for ligation with SV40NLS (PCR34).

Procudure:

Reaction batch:

volume	reagent
20 µl	P292
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

WRONG DIGESTION! IT SHOULD HAS BEEN XbaI+AgeI-HF! BUT IT CAN BE USED FOR OTHER PURPOSES

Preperative digestion of P293 (Gal4AD)

Investigator: Jeff

Aim of the experiment: Contruction of N'-SV40NLS-Gal4AD-pGADT7 AD linker-Pif3(100NT)-C'.

Procedure:

Reaction batch:

volume	reagent
20 µl	P293
8 µl	Buffer Tango (10x)
4 µl	EcoRI (10 U/µl)
2 µl	BamHI (10 U/µl)
6 µl	ddH2O
=40 µl	TOTAL

Preperative gelelectrophoresis of digested PCR41, PCR48, PCR65

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested PCR41, PCR48, PCR65.

Procedure:

Preperative gelelectrophoresis was performed at 70 V for 90 min.

5.55 µl of DNA loading buffer (10x) was added to each of the digested PCR products.

Order of gel-pockets:

PCR41 digested MfeI+BamHI	100 bp ladder DNA ladder	PCR48 digested with XbaI+PstI-HF	1 kbp ladder DNA ladder	PCR65 digested with XbaI+PstI-HF
Okay!		Length OK but wrong digestion, should have been XbaI+AgeI-HF		Length OK but wrong digestion, should have been XbaI+AgeI-HF

Preperative gelelectrophoresis of digested P292 and P293

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested P292 and P293

Procedure:

Preperative gelelectrophoresis was performed at 70 V for 90 min.

4.44 µl of DNA loading buffer (10x) was added to each of the digested plasmid products.

Order of gel-pockets:

P292 digested XbaI+PstI-HF	100 bp ladder DNA ladder	P293 digested with EcoRII+BamHI	1 kbp ladder DNA ladder
Length OK but wrong digestion, should have been XbaI+AgeI-HF		Okay!

Ligation of P71+P322

Investigator: Jeff

Aim of the experiment: Ligation of P71+P322.

Procedure:

Reaction batch:

volume	reagent
4.18 µl	P71
3.63 µl	P322
2 µl	T4 ligase buffer (10x)
0.25 µl	T4 ligase (5 U/µl)
9.69 µl	ddH2O
=20 µl	TOTAL

No negative control because there was no sufficient amount of P71 anymore.

The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Ligation of P71+P323

Investigator: Jeff

Aim of the experiment: Ligation of P71+P323.

Procedure:

Reaction batch:

volume	reagent
4.18 µl	P71
5.01 µl	P323
2 µl	T4 ligase buffer (10x)
0.25 µl	T4 ligase (5 U/µl)
8.31 µl	ddH2O
=20 µl	TOTAL

No negative control because there was no sufficient amount of P71 anymore.

The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Ligation of P206+P337

Investigator: Jeff

Aim of the experiment: Ligation of P206+P337.

Procedure:

Reaction batch:

volume	reagent
1.69 µl	P206
7.62 µl	P337
2 µl	T4 ligase buffer (10x)
0.25 µl	T4 ligase (5 U/µl)
8.19 µl	ddH2O
=20 µl	TOTAL

Negative control was performed with P206 only wihtout insert, i. e. the only difference is that ddH2O was used instead of P337 in the reaction batch.

The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Ligation of P342+PCR66

Investigator: Jeff

Aim of the experiment: Ligation of P342+PCR66.

Procedure:

Reaction batch:

volume	reagent
1.04 µl	P342
1.92 µl	PCR66
2 µl	T4 ligase buffer (10x)
0.25 µl	T4 ligase (5 U/µl)
14.54 µl	ddH2O
=20 µl	TOTAL

Negative control was performed with P342 only wihtout insert, i. e. the only difference is that ddH2O was used instead of PCR66 in the reaction batch.

The ligation was performed at room temperature for 1 h after manufacturer's protocol.

Transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66.

Procedure:

5 µl of the ligation products (P71+P322, P71+P323, P206+P337 and P342+PCR66) and their negative controls (P206 NK, P324 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on suitable antiotic plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on suitable antbiotic plates.

Quick Change mutagenesis to remove SpeI(at 684 bp) in the 4CL and SpeI (at 470 bp) in CHS

Investigator: Ingmar

Aim of the experiment: Generation of RFC 25 compatible versions of the 4CL and CHS genes. Used plasmids

pYes
- 4Cl+: P193
- 4CL-: P194
- CHS+: P195
- CHS-: P196
PSB1C3
- 4CL+ P185
- 4CL-: P186
- CHS+: P135
- CHS-: P136

PCR
Reaction batch 1

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	DNA
0.5 µl	1:10 dilution of O81 for 4 CL and O83 for CHS (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	DNA
0.5 µl	1:10 dilution of O82 for 4 CL and O84 for CHS (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	10	95°C	30 sec
		55°C	1 min
		67°C	6 min

Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Analysis of plated, untransformed chemocompetent E.Coli- cells

Investigator: Roman

Aim: To test the prepared chemocompetent E.Coli- cells.

Results:

Plate with kanamycin: no colonys (as expected)
Plate with ampicillin: no colonys (as expected)
Plate with tetracyclin: full (as expected, due to natural resistance)
Plate with chloramphenicol: 12 colonies (not expected, should be empty)

The plating on a chloramphenicol containing plate will be repeated, at 37°C over night instead of room temperature over the weekend, because perhaps chloramphenicol is degraded by the bacteria after two days

small-Scale Yeast Transformation of pYES without insert

Investigator: Katrin, Ingmar

Aim of the experiment:Transformation of P152 (pYes without insert) in Yeast

The protocol on page 13 of the pYES2 manual was used. To ensure a positive result, two transformations were made.

Only modifications are noted:

step 1: inoculate in 4 ml YPD medium

step 2: OD600 = 5,6 -> to determine a OD600 of 0.4 in 50 ml, 3 ml yeast suspension and 50 ml YPD medium were used.

steps 3 and 4: centrifugation for 5 min, 4 °C

step 6:

1 µg plasmid DNA

P152: c = 156.8 ng/µl -> 6,4 µl

100 µg denatured sheared salmon sperm: the one from Simon was used -> 10 µl

The cells were plated out on SC-U plates with Glucose and incubated at 30°C

Plasmid isolation of p123 and p136

Investigator: Roman

Aim: Aim of the experiment was the isolation of p123 out of transformed (see friday) XL-1 blue chemo competent e.coli- cells. Old and newly prepared competent cells were used (see friday). Besides, p136 was isolated out of transformed cells, which is pSB1C3 with CHS- inserted. The whole experiment should provide an adequate amount of pSB1C3 backbone for the caffeine team, because we want to insert our three genes in this vector.

Operational Sequence:

The plasmid preparation was performed as described in the manufacturers protocoll (Quiagen Miniprep Kit). Elution was done with 50 µl Elution Buffer in one step. Due to the incubation of the liquid cultures at room temperature over the weekend instead of 37°C over night, the pellet was a bit smaller than usual, resulting in concentrations of only:

51,9 ng/µl (p123, old competent cells used)
57,8 ng/µl (p123, new competent cells used)
59,2 ng/µl (p136)

Restriction digest of p123 and p136 and preparative gel electrophoresisb

Investigator: Roman

Aim:

Preparation of Xba1 and Pst1 digested pSB1C3 backbone, to be able to ligate the three caffeine genes into it.

Operational sequence

Reaction batch:

volume	reagent
50 µl (ca. 2-3 µg)	p123/p136
6 µl	10x Buffer NEB 4
0,6 µl	BSA (100x)
2 µl	Xba1 RE
2 µl	Pst1- HF RE
=60 µl	TOTAL

Afterwards, about 6 µl of 10x loading dye were added and the fragments were separated by preparative gel electrophoresis, with the CHS- fragment being about 1300 bp in length.

From left to right:

DNA- Ladder

pSB1C3_Xba1Pst1

pSB1C3_CHS-_Xba1Pst1

DNA- Ladder

Dilution of gen- synthesis products and transformation

Investigator: Roman

Aim:

Dilution of dried pUCIDT- Amp vector, which contains the gene synthesis products. Afterwards, transformation of pUCIDT_CaXMT1, pUCIDT_CaMXMT1 and pUCIDT_CaDXMT1 in chemo competent XL-1 blue e.coli- cells, to make the genes available for cloning in pSB1C3 and pYES2.

Operational sequence

Basical vector data of pUCIDT

length: 2752 bp
resistance: ampicillin

About 2 µg of dried vector (containing our inserts) were delivered. By dilution with 20 µl bidestillated water (after centrifugation), a final concentration of about 100 ng/µl was adjusted.

Transformation

Transformation in chemo competent cells was performed as previously described. Unconcentrated plating (100 µl) was performed on ampicillin containing LB agar plates, whereas the rest of the transformation- batch was stored in the fridge at 4°C (previous experiments showed, that unconcentrated plating led to enough colonies). The plates were incubated at room temperature over the next two days.

Repetition of plating of newly prepared chemo competent cells

Investigator: Roman

Aim:

Test of newly prepared chemo competet cells, due to present chloramphenicol resistance

Operational sequence

Because 12 colonies were grown on chloramphenicol containing agar plates after incubation at room temperature over the weekend (although "empty" competent XL1- blue cells were used), this plating was repeated and incubation was carried out at 37°C over night.

Preparative restriction digest and gel electrophoresis of the preprothaumatin plasmid and pYes2

Investigator: Maddin, Aloisius

Aim: Cloning of preprothaumatin on pYes2

Operational sequence

Preparative restriction digest:

5 µl pYes2; 1 µl XbaI; 1 µl SpeI; 5 µl 10x NEBuffer 4;0,5 µl BSA; 37.5 µl ddH2O; 37 °C, 1 h.

10 µl Preprothaumatinplasmid (gene synthesis!); 1 µl XbaI; 1 µl SpeI; 5 µl 10x NEBuffer 4; 0,5 µl BSA; 32.5 µl ddH2O; 37 °C, 1 h.

Preparative gel electrophoresis: expected lengths for pYes2: backbone: 5.8 kb, (insert: 62 bp); expected length for preprothaumtin plasmid: backbone: 2.2 kb, insert: 721 bp.

Gel extraction according to QIAqick® Gel Extraction Kit. Not successful, EtOH was forgotten.
Transformation of E. coli XL1-Blue with the preprothaumatin plasmid (selection with amp).

Tuesday, August 14th

Analytical digestion of picked colony-DNA with XbaI- + PSTI-HF

Investigator: Georg

Aim of experiment: Find positive clones from transformation with ligation products ADH1-P+psb1c3, ADH1-T+psb1c3,TEF1-t+psb1c3 and TEF1-P+psb1c3

Reaction batch for digestion:

volume	reagent
5,5 µl	PstI-HF (NEB)
5,5 µl	XbaI (NEB)
44 µl	NEB-4 buffer
4,4 µl	100 x BSA (NEB)
325,6 µl	dd H20
=385µl	TOTAL

to 2,5 ml of DNA 17,5 µl reaction batch were added
Digestion took place at 37°C for 1 h

NO TEF1-T as insert but TEF1-P, you probably has mismatched tubes

Ligation was succesful
wrong insert

Picking from the overnight transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment: Picking from the overnight transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue.

Procedure:

5 colonies of each transformation from P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR) transformated cells were picked.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics (P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR)). These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Reapeat of transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66 from August, the 13th

Investigator: Jeff

Aim of the experiment: Reapeat of transformation of E. coli XL1-Blue with ligation products of P71+P322, P71+P323, P206+P337 and P342+PCR66 from August, the 13th. The reason is that the freshly prepared competent cells are contaminated with a foreign plasmid.

Procedure:

5 µl of the ligation products (P71+P322, P71+P323, P206+P337 and P342+PCR66) and their negative controls (P206 NK, P324 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on suitable antiotic plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on suitable antbiotic plates. Accidently, only the pellet of P342+PCR66 and P342 NK was plated.

Analysis of plated XL1-blue chemo competent e.coli (untransformed)

Investigator: Volker

Aim:

Test of prepared chemo competent cells (empty) due to present resistance for chloramphenicol

Results

Again 14 colonies have grown on the plate, after incubating at 37°C over night. One can presume, that the newly prepared competent cells have taken up any plasmid providing chloramphenicol resistance (e.g. pSB1C3), makin them unuseful for our experiments. The uptake probably took place when inoculating the LB medium, one day befor the cells were prepared, because a sample of our old competent cells was used for the inoculation instead of a plated colony of e.coli- XL1-blue.

Analytical restriction digest of ligation products of 10.08. after miniprep

Investigator: Andrea

Aim: Check ligation of PCR 42 and PCR43 (Citrus) & PCR 56, PCR 57 and PCR 58 (Lavendula) into pYES and pSB1C3.

volume	reagent
20 µl	miniprep products
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
0.25 µl	XbaI (20 U/µl)
0.25 µl	Pst1-HF (20 U/µl)
=20 µl	TOTAL

Master-Mix: 7 µl Enzyme, 56 µl NEB-Buffer, 5,6 µl BSA, 414,4 µl ddH2O
2,5 µl DNA added to 17,5 µl Master-Mix
Incubation at 37°C for 1,5 h.

Gelelectrophoresis:

ligation failed

Preparation of material for protein expression in yeast

Investigator: Ingmar, Katrin

Aim of the experiment:Preparation of media for protein expression in yeast (expression will be done on thursday, august 16th)

The following media were made:

SC-U medium (synthetic complete medium, without uracil)

0.67% yeast nitrogen base (without amino acids)
2% carbon source (i.e. glucose or galactose)
0.01% (adenine, arginine, cysteine, leuine, lysine, threonine, tryptophan)
0.005% (aspartic acid, histidine, isoleucine, methionine, phenylalanine, proline, serine, tyrosine, valine)

--> Production:We produced 1l of induction media(containig 2% galactose and 1 l of growth media(containing 2% glucose). A 50ml AS-aliquot and 6.7g Yeast Nitrogen Base were dissolved in 850ml water and autoklaved. Parallely 100 ml solutions with 20 % galactose and galactose respectively were autoclaved and mixed with 900 ml of the other media afterwards.

Breaking buffer

50 mM sodium phosphate buffer, pH 7,5
1 mM EDTA
5% (v/v) glycerol
1 mM PMSF

Minipreparation of the preprothaumatin plasmid (gene synthesis)

Investigator: Martianus, Aloisius

p343, p344, p345.

Wednesday, August 15th

Sequencing of TEF1-T, TEF1-P, ADH1-P, ADH1-T (noch machen)

Investigator: Georg

Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P71+P322, P71+P323, P206+P337 and P342+PCR66

Investigator: Jeff

Aim of the experiment: Miniprep of overnight culture of transformated E. coli XL1-Blue with with ligated P71+P292, P71+P293, P206+P337 and P342+PCR66.

Procedure:

Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 and P71+P323 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 (P352-P356) and P71+P323 products (P357-P361).

Procedure:

Mastermix for analytical digestion with XbaI+PstI-HF

volume	reagent
22 µl	NEBuffer 4 (10x)
2.2 µl	BSA (100x)
2.75 µl	XbaI (20 U/µl)
2.75 µl	PstI-HF (20 U/µl)
162.8 µl	ddH2O
=192.5 µl	TOTAL

17.5 µl of the mastermix for XbaI+PstI-HF was added to 2.5 µl of plasmid DNA of P352-P356.

Incubation for 2 h at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

100 bp ladder DNA ladder	P352	P353	P354	P355	P356	P357	P358	P359	P360	P361	1 kbp ladder DNA ladder
	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed

Only the linearized backbone (pYES2 new with ~6 kbp) is visible but no inserts were visible.

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products (P352-P366).

Procedure:

Mastermix for analytical digestion with NgoMIV+PstI-HF

volume	reagent
12 µl	NEBuffer 4 (10x)
1.5 µl	NgoMIV (10 U/µl)
1.5 µl	PstI-HF (20 U/µl)
90 µl	ddH2O
=105 µl	TOTAL

17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P362-P366.

Incubation for 2 h at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

100 bp ladder DNA ladder	P362	P363	P364	P365	P366	1 kbp ladder DNA ladder
	Digestion not worked properly? Seems like it was successful but digestion does not work properly.	Ligation failed	Digestion not worked properly? Seems like it was successful but digestion does not work properly.	Ligation failed	Digestion not worked properly? Seems like it was successful but digestion does not work properly.

For P362, P364 and P366, it seems that the digestion does not work properly, the expected band around 2-2.1 kbp and ~360 bp were only weak.

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products (P367-P371).

Procedure:

Mastermix for analytical digestion with NdeI+BamHI

volume	reagent
24 µl	Tango (10x)
6 µl	NdeI (10 U/µl)
6 µl	BamHI (10 U/µl)
69 µl	ddH2O
=105 µl	TOTAL

17.5 µl of the mastermix for NdeI+BamHI was added to 2.5 µl of plasmid DNA of P367-P371.

Incubation for 2 h at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

100 bp ladder DNA ladder	P367	P368	P369	P370	P371	1 kbp ladder DNA ladder
	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed

Ligation failed, even no Backbone was visible (~8 kbp)!

Transformation of E.coli XL1 blue with ligation products

Investigator: Andrea

Aim: Transformation of ligation products PCR42/P133, PCR43/P133, P56/P133, P57/P133, P58/P133, PCR42/P175, P43/P175, P56/P175, P57/P175, P58/P175

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
add 5 µl of ligation product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 45 min
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an antibiotic containing LB-plate (Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133))

repetition of analytical restriction digest of ligation products of 10.08. after miniprep

Investigator: Andrea

Aim: Check ligation of PCR 42 and PCR43 (Citrus) & PCR 56, PCR 57 and PCR 58 (Lavendula) into pYES and pSB1C3.

volume	reagent
20 µl	miniprep products
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
0.25 µl	XbaI (20 U/µl)
0.25 µl	SpeI (20 U/µl)
=20 µl	TOTAL

Master-Mix: 7 µl Enzyme, 56 µl NEB-Buffer, 5,6 µl BSA, 414,4 µl ddH2O
2,5 µl DNA added to 17,5 µl Master-Mix
Incubation at 37°C for 2 h.

Gelelectrophoresis:

ligation failed

Picking of colonies of transformation (August 3rd and August 8th)

Investigator: Katrin

Aim: Get cells for miniprep for further analytical restriction digest to check whether ligation has worked.

Procedure:

Picking of 10 clones each of PCR42/p175 and PCR56/p175 (Trafo 08.08.)
Picking of 3 clones of PCR2/P133 (Trafo 03.08.)
Picking of 1 clone of PCR2/P175 (Trafo 03.08.)
clones were put into 4 ml LB with Amp (P175) or Chlp (P133)
Inbucation at 37°C (shaker) over night.

Preparation of cells for protein expression in yeast

Investigator: Katrin

Aim of the experiment:Picking transformed Saccharomyces cerevisae cells for protein expression in yeast (expression will be done on Thursday, August 16th)

Inocultion of overnight cultures: one clone from each plates with PAL+/-, CHS+/-, 4CL+/-, OMT1+/-, APT, GFP was picked,resuspended in 15 ml SCU medium with glucose and incubated at 30 °C overnight

Thursday, August 16th

Analytical digestion of P307+P309

Investigator: Georg

Reaction batch for digestion:

volume	reagent
0,5 µl	PstI-HF (NEB)
0,5 µl	XbaI (NEB)
4µl	NEB-4 buffer
0,4 µl	100 x BSA (NEB)
29,6 µl	dd H20
=35 µl	TOTAL

To 17,5 µl reaction mix, 2,5 µl DNA were added
Digestion took 1 hour at 37 C

Gelextraction of linear pYESII-Tum

Investigator: Georg

Gelextraction was done according to Quiaquick gel extraction kit

Nanodrop

Investigator: Georg

P265 :11,2 ng/µl
P264 :12,7 ng/µl
P264B:13,8 ng/µl
P265B:14,9 ng/µl

Ligation of pYESII-TUM

Investigator: Georg

Procedure:

Reaction batch for Ligation:

volume	reagent
5 µl µl	T4-Ligase (1u/µl)
3,36 µl (=50 ng)	P265B (PYesII digested)
5 µl	10x T4-ligase buffer
2,5 %	50% PEG 4000
24,14 µl	dd H20
=50µl	TOTAL

Ligation took place at 16 C overnight

Preparative digestion of P 402 + P91

Investigator: Georg

Reaction batch for digestion:

volume	reagent
2 µl	PstI-HF (NEB)
2 µl	SpeI-HF (NEB)
8 µl	NEB-4 buffer
0,8 µl	100 x BSA (NEB)
27,2 µl	dd H20
=40µl	TOTAL

Digestion was done at 37 C for 3 hours

ligation of TEF2-P (PCR59) and Cyc1-T P131 with P132

Investigator: Georg

Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
2,99 µl (=100 ng)	P132
2 µl	10x T4-ligase buffer
8,01 µl	PCR59
6,5 µl	dd H20
=20µl	TOTAL

Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
2,99 µl (=100 ng)	P132
2 µl	10x T4-ligase buffer
9,31 µl	P131
5,5 µl	dd H20
=20µl	TOTAL

Ligation was done at 16 C overnight

Analytic digestion and gelelectrophoresis of P362, P364 and P366

Investigator: Jeff

Aim of the experiment: Analytic digestion and gelelectrophoresis of P362, P364 and P366 because the analytical digestion from the day before does not work properly.

Procedure:

Mastermix for analytical digestion with NgoMIV+PstI-HF

volume	reagent
8 µl	NEBuffer 4 (10x)
2 µl	NgoMIV (10 U/µl)
1 µl	PstI-HF (20 U/µl)
59 µl	ddH2O
=70 µl	TOTAL

17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P362, P364 and P366.

Incubation for 90 min at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

100 bp ladder DNA ladder	P362	P364	P366	1 kbp ladder DNA ladder
	Ligation failed	Ligation failed	Ligation succesfull, but to be sure, sequencing has to be performed!

Sequencing of P366

Investigator: Jeff

Aim of the experiment: Succesful fusion of 20aa Linker + Pif3 has to be proven. Sequencing was performed by Eurofins.

Procedure:

Preparing sequencing primer VF2 for Eurofins (c=2 pmol/µl)

volume	reagent
0.4 µl	O68 (100 pmol/µl)
19.6 µl	ddH2O
=20 µl (2 pmol/µl	TOTAL

15 µl of P366 was pippetted in a new tube for sequencing.

Both tubes were sent to Eurofins

Sequencing results:

TATAAATAGGCGTATCACGAGGCAGAATTTCAGATAAAAAAAATCCTTAGCTTTCGCTAA
GGATGATTTCTGGAATTCGCGGCCGCTTCTAGATGGCCGGCGCGAGCGGCGCGGGCGGCA
GCGAAGGCGGCGGCAGCGAAGGCGGCACCAGCGGCGCGACCACCGGCATGCCTCTGTTTG
AACTTTTCAGGCTCACCAAAGCTAAGCTTGAATCTGCTCAAGACAGGAACCCTTCTCCAC
CTGTAGATGAAGTTGTGGAGCTGGTGTGGGAAAATGGTCAGATATCAACTCAAAGTCAGT
CAAGTAGATCGAGGAACATTCCTCCACCACAAGCAAACTCTTCAAGAGCTAGAGAGATTG
GAAATGGCTCAAAGACGACTATGGTGGACGAGATCCCTATGTCAGTGCCATCACTAATGA
CGGGTTTGAGTCAAGACGATGACTTTGTTCCATGGTTGAATCATCATACCGGTTAATACT
AGTAGCGGCCGCTGCAGTCCGGCAAAAAAACGGCAAGGTGTCACCACCCTGCCCTTTTTC
TTTAAAACCGAAAAGATTACTTCGCGTTATGCAGGCTTCCTCGCTCACTGACTCGCTGCG
CTCGGTCGTTCGGCTGCGGCGAGCGGTATCAGCTCACTCAAAGGCGGTAATACGGTTATC
CACAGAATCAGGGGATAACGCAGGAAAGAACATGTGAGCAAAAGGCCAGCAAAAGGCCAG
GAACCGTAAAAAGGCCGCGTTGCTGGCGTTTTTCCACAGGCTCCGCCCCCCTGACGAGCA
TCACAAAAATCGACGCTCAAGTCAGAGGTGGCGAAACCCGACAGGACTATAAAGATACCA
GGCGTTTCCCCCTGGAAGCTCCCTCGTGCGCTCTCCTGTTCCGACCCTGTCGCTTACCGG
ATACCTGTCCGCCTTTCTCCCTTCGGGAAGCGTGGCGCTTTCTCATAGCTCACGCTGTAG
GTATCTCAGTTCGGTGTAGGTCG

Sequencing is fine!

Preperative digestion of PCR48 (Gal4DBD)

Investigator: Jeff

Aim of the experiment: To backup amplificated Gal4DBD with RFC25 pre- and suffix in pSB1C3.

Procedure:

Reaction batch:

volume	reagent
17 µl	PCR48
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
23.5 µl	ddH2O
=50 µl	TOTAL

Preperative digestion of PCR65 (PhyB 908NT)

Investigator: Jeff

Aim of the experiment: To backup amplificated PhyB (908NT) with RFC25 pre- and suffix in pSB1C3.

Procedure:

Reaction batch:

volume	reagent
7 µl	PCR65
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
35.5 µl	ddH2O
=50 µl	TOTAL

Preperative digestion of P231

Investigator: Jeff

Aim of the experiment: Preperative digestion of P231 for ligation to N-terminal SV40 nuclear localization signal. But sequencing result has first to be awaited.

Procedure:

Reaction batch:

volume	reagent
20 µl	P231
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	AgeI(20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Preperative digestion of P235

Investigator: Jeff

Aim of the experiment: Preperative digestion of P235 for get the pYES2newMCS backbone for cloning heme oxygenase (HO1) and phycocyanobilin:ferredoxin oxidoreductase (PcyA) into pYES2newMCS.

Procedure:

Reaction batch:

volume	reagent
20 µl	P235
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI(20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Preperative gelelectrophoresis of digested PCR48 and PCR65

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested PCR48 and PCR65.

Procedure:

Preperative gelelectrophoresis was performed at 70 V for 90 min.

5.55 µl of DNA loading buffer (10x) was added to each of the digested plasmid products.

Order of gel-pockets:

100 bp ladder DNA ladder	PCR48 digested XbaI+AgeI-HF	PCR65 digested with XbaI+AgeI-HF	1 kbp ladder DNA ladder
	Length OK!	Length OK!

Preperative gelelectrophoresis of digested P231 and P235

Investigator: Jeff

Aim of the experiment: Preperative gelelectrophoresis of digested P231 and P235

Procedure:

Preperative gelelectrophoresis was performed at 70 V for 90 min.

4.44 µl of DNA loading buffer (10x) was added to each of the digested plasmid products.

Order of gel-pockets:

P231 digested XbaI+AgeI-HF	100 bp ladder DNA ladder	P235 digested with XbaI+AgeI-HF	1 kbp ladder DNA ladder
Length OK!		Length OK!

From digested P235 only the backbone was cut out for further ligations.

PCR amplification of a fragment of P313 to introduce RFC25 pre- and suffix

Investigator: Jeff

Aim of experiment: Amplification of wanted fragment of P313 (PhyB 908-NT) to introduce RFC25 pre- and suffix.

Operational Sequence:

2 tubes were prepared

PCR reaction batch was prepared as follows:

substrate	volume in µl
ddH2O	35.75
One Taq Standard Reaction Buffer (5x)	10
Plasmid template (P313)	1
Primer O70 (10 µM)	1
Primer O72 (10 µM)	1
dNTP (10 mM)	1
Polymerase One Taq	0.25

PCR temperature program:

initial heating: 94°C for 30s
30 cycles
denaturation: 94°C for 30s
annealing: 67°C for 60s
elongation: 68°C for 3 min
final elongation: 68°C for 5 min
4°C

Afterwards, the PCR reaction products were cleaned with the Qiagen's PCR purification kit after manufacturer's protocol and were stored over night in the fridge at 4 °C

Miniprep of the 10 h culture of transformated E. coli XL1-Blue with with ligated P71+P322, P71+P323, P206+P337 and P342+PCR66

Investigator: Jeff

Aim of the experiment: Miniprep of the 10 h culture of transformated E. coli XL1-Blue with with ligated P71+P292, P71+P293, P206+P337 and P342+PCR66.

Procedure:

Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Ligation of P207+PCR69

Investigator: Jeff

Aim of the experiment: Ligation of P207+PCR69 to backup Gal4DBD with RFC25 pre- ans suffix on pSB1C3.

Procedure:

Reaction batch:

volume	reagent
1.41 µl	P207
7.19 µl	PCR69
2 µl	T4 ligase buffer (10x)
0.25 µl	T4 ligase (5 U/µl)
9.15 µl	ddH2O
=20 µl	TOTAL

Negative control was performed with P207 only wihtout insert, i. e. the only difference is that ddH2O was used instead of PCR69 in the reaction batch.

The ligation was performed at 16 °C overnight.

Ligation of P207+PCR70

Investigator: Jeff

Aim of the experiment: Ligation of P207+PCR70 to backup PhyB(908 NT) with RFC25 pre- ans suffix on pSB1C3.

Procedure:

Reaction batch:

volume	reagent
1.12 µl	P207
16.38 µl	PCR70
2 µl	T4 ligase buffer (10x)
0.25 µl	T4 ligase (5 U/µl)
=20 µl	TOTAL

Negative control was performed with P207 only wihtout insert, i. e. the only difference is that ddH2O was used instead of PCR70 in the reaction batch.

The ligation was performed at 16 °C overnight.

Picking from the transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue from Tuesday, the 14th

Investigator: Jeff

Aim of the experiment: Picking from the transformation of ligated P71+P322, P71+P323, P206+P337 and P342+PCR66 product in E. coli XL1-Blue from Tuesday, the 14th because the same transformation the day before failed because the competent cells were contaminated, e. g. they already carries a plasmid.

Procedure:

5 colonies of each transformation from P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR) transformated cells were picked from the transformation from Tuesday, the 14th.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and antibiotics (P71+P322 (AmpR), P71+P323 (AmpR), P206+P337 (CamR) and P342+PCR66 (AmpR)). These tubes were put 10 h in a 180 rpm cell culture shaker at 37 °C.

Induction, Incubation and cell disruption of S.c. containing PAL+/-, 4Cl+, CHS+/-, OMT+/-, APT and GFP

Investigator: Ingmar, Katrin

Aim of the experiment: Take samples at variable times after induction and disrupt the cells in order to optimize the amount of desired protein. Procedure:

at 13:30h the overnight culture was diluted in 50 ml SC-U medium conataining 2 % galactose until an OD600 of 0.4.
beginning 4h after induction every 3 h samples were taken and cells were disrupted according to "Expression in Saccharomyces cerevisiae" of Huang FC, Studart-Witkowski C & Schwab W 2010. The supernatant of the disrupted cells were used for protein concentration appreciation using the nanodrop photometer. Afterwards they were stored at -80°C.

Gel extraction of p123 and p136

Investigator: Roman

Aim:

Extraction of pSB1C3 (digested with Xba1 and Pst1, = p123 and p136; digest was made on Monday) out of agarose gel.

Operational Sequence

Gel extraction was performed as described the manufacturers protocol (Quiagen). However, the determined concentrations (NanoDrop) were quite low:

8 ng/µl for p123 (Xba/Pst1)
11 ng/µl for p136 (Xba1/Pst1)

This results in a yield of only about 20% (original concentrations were between 50 and 60 ng/µl) Thus, a new over night culture was prepared (see below) to gain a higher initial concentration of plasmid DNA. The next gel extraction will be performed with bidestillated water (instead of elution buffer EB), temperated at 50°C.

Restriction digest of p373 (pYES2 new MCS RFC25)

Investigator: Roman

Aim:

Restriction digest of pYES2 new with Xba1 and Pst1-HF to be able to clone the caffeine genes into.

Operational Sequence

Reaction batch:

volume	reagent
4µl	NEBuffer 4 (10x)
0,4µl	BSA (100x)
2µl	XbaI (20 U/µl)
2µl	PstI-HF (20 U/µl)
11,6µl	ddH2O
=40µl	TOTAL

The reaction batch was incubated for 2.5h at 37°C.

Picture:

From left to right:

DNA- Ladder

pYES2newMCS_Xba1Pst1

Picking of transformed e.coli- XL1-blue cells and preparation of liquid cultures

Investigator: Roman

Aim:

Preparation of liquid over night cultures of the following transformants:

Operational sequence:

pUCIDT_CaXMT1
pUCIDT_CaMXMT1
pUCIDT_CaDXMT1
pSB1C3_CHS- (=p136)

Two colonies of each plate were picked and used for inoculation of 6ml LB medium, containing the respective antibiotic (ampicillin or chloramphenicol). The tubes were incubated at 37°C over night.

Gel extraction of p373 (=pYES2 new MCS RFC25)

Investigator: Roman

Aim:

Extraction of Xba1 and Pst1 digested pYES2 new out of agarose gel, to make it ready for ligation

Operational sequence:

Gel extraction was performed as described in the manufacturers protocoll. However, bidestillated water was used for elution (30µl). Besides, the water was heated up to 37°C and also the 5 minutes of incubation (before final centrifugation) was done on the heating block at 37°C.

NanoDrop

Concentration of the extracted plasmid was determined with NanoDrop and resulted in a concentration of 75,9 ng/µl. As of now, all elution steps in gel extraction procedures will be performed at these conditions.

PCR of C-LS3 (BBa_I742111, Trafo 19.6)

Investigator: Andrea

Aim: To get more PCR product in case another preparative digest is needed.

Primer with consensus sequence

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer O27
1 µl	10 µM Reverse Primer O30
0.25 µl	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl	Plasmid DNA (BBa_I742111) Clone 3
35.75 µl	dd water
50 µL	TOTAL

Primer without consensus sequence

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer O28
1 µl	10 µM Reverse Primer O30
0.25 µl	OneTaq Hot Start DNA Polymerase (Finally: 1.25 units/50 µl)
1 µl	Plasmid DNA (BBa_I742111) Clone 3
35.75 µl	dd water
50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	47 °C	30 s
	68 °C	1,75 min
Final extension	68 °C	5 min
Hold	4 °C	1 h

1: Primer O27 / O30
2: Primer O28 / O30

PCR of Schwab plasmid Quickchange-DNA to amplify gene for lavendula LS

Instructor: Andrea

Aim: PCR of Schwab plasmids after Quickchange-Mutagenesis with primers which were designed to amplify the lavendula LS gene and to add RFC25 restriction sites.

3 different primer combinations were used:

1. O33/O37

2. O34/O37

3. O35/O37

Each primer combination was used for plasmid DNA amplification of P283.

PCR reaction mixture

volume	reagent
10 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
1 µl	10 µM Forward Primer
1 µl	10 µM Reverse Primer
0.25 µl	OneTaq Hot Start DNA Polymerase (Final: 1.25 units/50 µl)
3 µl	Plasmid DNA P283
33.75 µl	dd water
50 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	50 °C	30 s
	68 °C	1,75 min
Final extension	68 °C	5 min
Hold	4 °C	1 h

3: Primer O33/O37
4: Primer O34/O37
5: Primer O35/O37

Miniprep of pYES clones picked on August 15th

Investigator: Andrea

Aim: Get transformed plasmids for further ligations.

Procedure: Miniprep was done using Qiagen miniprep kit.

concentrations: see "Inventarliste"

Miniprep of ligation products of transformation from August 3rd and August 8th

Investigator: Andrea

Aim: Get transformed plasmids for further analytical restriction digest to check whether ligation worked.

Procedure: Miniprep was done using Qiagen miniprep kit.

1: 84 ng/µl
2: 75 ng/µl
3: 115 ng/µl
4: 107 ng/µl
5: 97 ng/µl
6: 112 ng/µl
7: 63 ng/µl
8: 53 ng/µl
9: 87 ng/µl
10: 107 ng/µl
11: 92 ng/µl
12: 48 ng/µl
13: 107 ng/µl
14: 105 ng/µl
15: 118 ng/µl
16: 106 ng/µl
17: 80 ng/µl
18: 84 ng/µl
19: 90 ng/µl
20: 97 ng/µl
21: 250 ng/µl
22: 60 ng/µl
23: 41 ng/µl
24: 275 ng/µl

Eppis containing miniprep products were stored in an disposal bag at the upper drawer of -20°C. --> will be thrown away in case ligation hasn't worked.

Preparative restriction digest of PCR 56,57,58 (lavendula LS) and PCR 42,43 (citrus LS)

Investigator: Andrea

Aim: Prepare digested PCR fragments for further ligation into pYES and pSB1C3.

volume	reagent
25 µl	PCR products
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
17.5 µl	ddH2O
=50 µl	TOTAL

A mastermix for 6 reactions was produced (30µl NEB-Buffer, 3µl BSA, 6µl per enzyme, 105µl ddH2O).
PCR products were digested at 37 °C for 3 hours.

P187 was used as positive control for restriction digest (XbaI and AgeI).

Before Gelelectrophoresis Dephosphorylation of several fragments was done (see next part) !

Gelelectrophoresis:

Limonensynthase: 1600 bp

Digested PCR products (still in gel) are stored in an disposal bag at the upper drawer of -20°C.

Dephosphorylation of digested PCR 42, PCR 43, PCR 56, PCR 57 and PCR 58

Investigator: Andrea

Aim: Dephosphorylation of digested PCR products to avoid religation of the insert and enhance ligation rate.

Befor Dephosphorylation procedure can be performed, the PCR Purification Kit of Qiagen needs to be used for purifying the digest solution (for removing enymes and buffer) !!!

Procedure: Use of SAP from Fermentas

fill up the 50 µl digest solution to 60 µl with ddH20 (10 µl ddH2O were added)
add each 6µl SAP-Buffer and 1 µl SAP
mix
incubate at 37°C for 30 min
inactivation at 65°C for 15 min

Preparative restriction digest of P343, P344, P345, P152 (pYES) and P286 (pSB1C3)

Investigator: Andrea

Aim: Prepare digested Preprothaumatin plasmids for further ligation into pYES and pSB1C3.

volume	reagent
20 µl	PCR products
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	SpeI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

A mastermix for 6 reactions was produced (24µl NEB-Buffer, 2.4µl BSA, 6µl per enzyme, 81.6µl ddH2O).
plasmids were digested at 37 °C for 3 hours.

P187 was used as positive control for restriction digest (XbaI and AgeI).

Before Gelelectrophoresis Dephosphorylation of vectors (pYES and pSB1C3) was done (see next part) !

Gelelectrophoresis:

pSB1C3 digested with XbaI and AgeI was lost during gelelectrophoresis

Digested PCR products (still in gel) are stored in an disposal bag at the upper drawer of -20°C.

Dephosphorylation of digested pSB1C3 and pYES (with XbaI and SpeI)

Investigator: Andrea

Aim: Dephosphorylation of digested vectors to avoid religation and enhance ligation rate.

Befor Dephosphorylation procedure can be performed, the PCR Purification Kit of Qiagen needs to be used for purifying the digest solution (for removing enymes and buffer) !!!

Procedure: Use of SAP from Fermentas

fill up the 50 µl digest solution to 60 µl with ddH20 (10 µl ddH2O were added)
add each 6µl SAP-Buffer and 3 µl SAP
mix
incubate at 37°C for 30 min
inactivation at 65°C for 15 min

Friday, August 17th

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 and P71+P323 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P71+P322 (P379-P383) and P71+P323 products (P384-P388).

Procedure:

Mastermix for analytical digestion with XbaI+PstI-HF

volume	reagent
22 µl	NEBuffer 4 (10x)
2.2 µl	BSA (100x)
2.75 µl	XbaI (20 U/µl)
2.75 µl	PstI-HF (20 U/µl)
162.8 µl	ddH2O
=192.5 µl	TOTAL

17.5 µl of the mastermix for XbaI+PstI-HF was added to 2.5 µl of plasmid DNA of P379-P388 in an ERG.

Incubation for 2 h at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

100 bp ladder DNA ladder	P379	P380	P381	P382	P383	P384	P385	P386	P387	P388	1 kbp ladder DNA ladder
	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed

Only the linearized backbone (pYES2 new with ~6 kbp) is visible but no inserts were visible.

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P206+P337 products (P389-P393).

Procedure:

Mastermix for analytical digestion with NgoMIV+PstI-HF

volume	reagent
12 µl	NEBuffer 4 (10x)
1.5 µl	NgoMIV (10 U/µl)
1.5 µl	PstI-HF (20 U/µl)
90 µl	ddH2O
=105 µl	TOTAL

17.5 µl of the mastermix for NgoMIV+PstI-HF was added to 2.5 µl of plasmid DNA of P389-P393 in an ERG.

Incubation for 2 h at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

100 bp ladder DNA ladder	P389	P390	P391	P392	P393	1 kbp ladder DNA ladder
	Ligation failed	Ligation successful!	Ligation successful!	Ligation failed	Ligation failed

Succesful ligation for P390 and P391. 20aaLinker-PIF3 ready for further fusion!

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligated P342+PCR66 products (P394-P398).

Procedure:

Mastermix for analytical digestion with NdeI+BamHI

volume	reagent
24 µl	Tango (10x)
6 µl	NdeI (10 U/µl)
6 µl	BamHI (10 U/µl)
69 µl	ddH2O
=105 µl	TOTAL

17.5 µl of the mastermix for NdeI+BamHI was added to 2.5 µl of plasmid DNA of P394-P398.

Incubation for 2 h at 37 °C.

Analytical gelelectrophoresis was performed at 90 V for 60 min.

100 bp ladder DNA ladder	P394	P395	P396	P397	P398	1 kbp ladder DNA ladder
	Ligation failed	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!

Ligation for P395-P398! These construct is finished (N'SV40NLS-Gal4AD-Linker-Pif3-C')! Only the RFC10 pre- and suffixes are missing. Next step for this fusion construct is to introduce RFC10 pre- and suffix and ligate it to pSB1C3 and pYES2new for expression. And sequencing has to be done!

Transformation of E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70.

Procedure:

5 µl of the ligation products (P207+PCR69 and P207+PCR70) and their negative controls (P206 NK (PCR69), P206 NK (PCR70)) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.

Incubation at 37 °C overnight.

Transformation of E.coli Xl1-Blue with ligation of TEF2-p, CYC1-t with psb1c3 and pYES2 selfligation

Investigator: Georg

5 µl of each ligation reaction were transferred to 100 µl of competent cells.
Cells were kept on ice for 30 min.
Cells were heatshocked for 5 min. at 37 C
Cells were incubated for 45 min. at 37 C
Cells that were transformed with psb1c3 ligation product were transferred on Agarplates with Chla. Cells with *pYesII ligation product were palste on Amp Agar plates.

Preparation of probes for sequencing

Investigator: Georg

For sequencing of ligation product of Tef1-p, ADH1-p, Tef1-t and ADH1-t, with vector psb1c3 ligation products were diluted on a concentration between 50 ng/µl and 100 ng/µl at a min. volume of 15 µl. Sequencing primers were diluted to 2 µM at an min. volume of 15 µl

ADH1-P (188 ng/µl):2 = 7,5 µl (P401) + 7,5 µl H20
ADH-T (153,5 ng :2 = 7,5 µl + 7,5 µl H20
TEF1-P (207,8 ng/µl) :3 = 5 µl + 10 µl H20
Tef1-T (202,2 ng/µl) :3 = 5 µl + 10 µl H20
TEF2 (PCR-Product) (12,3 ng/µl)= 6,1 µl (TEF2-p) + 8,9 µl H20 = 5 ng/µl

Sequencing primer: VF2 for ADH1-p, ADH1-t, TEF1-p, TEF1-t. VR for ADH1-p rv. TEF2p_fw for TEF2-p

Quick Change mutagenesis to remove EcoRI(at 310 bp) in the 4CL

Investigator: Ingmar

Aim of the experiment: Generation of an RFC 25 compatible version of the 4CL gene.

PCR
Reaction batch 1

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	DNA
0.5 µl	1:10 dilution of O79 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	DNA
0.5 µl	1:10 dilution of O80 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	10	95°C	30 sec
		55°C	1 min
		67°C	6 min

Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
transfer of cells to 1 ml LB-medium without antibiotics and incubate at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate

Gel extraction of digested PCR products

Investigator: Lara

Aim: Extract digested PCR products for further ligation.

Due to previous phosphatase treatment (and presumably application of only 20 µl on the preparative gel), concentrations of products were very low:

PCR 42: 10 ng/µl
PCR 43: 10 ng/µl
PCR 56: 10 ng/µl
PCR 57: 13 ng/µl
PCR 58: 14 ng/µl

Digested products are stored in a disposal bag at the upper drawer of -20°C (label: Andrea, miniprep 16.8.)

Ligation of PCR 42, 43, 56, 57 and 58 with pYES (p175) and pSB1C3 (p133)

Investigator: Lara

Aim: Ligate both lavendula and citrus limonene synthase (with all primer combinations -> with or without consensus sequence) with pSB1C3 and pYES.

Procedure

PCR 42 in pYES (p175)

Substance	Volume
P175	0.5 µl (~50 ng vector dna)
PCR 42	8 µl (~6x of n(vector))
T4 ligase	0.25
T4 ligase buffer	1 µl
ddH2O	0.25 µl
TOTAL	=10 µl

PCR 42 in pSB1C3 (p133)

Substance	Volume
P133	1.2 µl (~50 ng vector dna)
PCR 42	20 µl (~6x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2.5 µl
TOTAL	=24.2 µl

PCR 43 in pYES (p175)

Substance	Volume
P175	0.5 µl (~50 ng vector dna)
PCR 43	8 µl (~6x of n(vector))
T4 ligase	0.25
T4 ligase buffer	1 µl
ddH2O	0.25 µl
TOTAL	=10 µl

PCR 43 in pSB1C3 (p133)

Substance	Volume
P133	1.2 µl (~50 ng vector dna)
PCR 43	20 µl (~6x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2.5 µl
TOTAL	=24.2 µl

PCR 56 in pYES (p175)

Substance	Volume
P175	0.5 µl (~50 ng vector dna)
PCR 56	8 µl (~6x of n(vector))
T4 ligase	0.25
T4 ligase buffer	1 µl
ddH2O	0.25 µl
TOTAL	=10 µl

PCR 42 in pSB1C3 (p133)

Substance	Volume
P133	1.2 µl (~50 ng vector dna)
PCR 56	20 µl (~6x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2.5 µl
TOTAL	=24.2 µl

PCR 57 in pYES (p175)

Substance	Volume
P175	0.5 µl (~50 ng vector dna)
PCR 57	6.5 µl (~6x of n(vector))
T4 ligase	0.25
T4 ligase buffer	1 µl
ddH2O	1.75 µl
TOTAL	=10 µl

PCR 57 in pSB1C3 (p133)

Substance	Volume
P133	1.2 µl (~50 ng vector dna)
PCR 57	18 µl (~6x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2.5 µl
TOTAL	=22.2 µl

PCR 58 in pYES (p175)

Substance	Volume
P175	0.5 µl (~50 ng vector dna)
PCR 58	6.0 µl (~6x of n(vector))
T4 ligase	0.25
T4 ligase buffer	1 µl
ddH2O	2.25 µl
TOTAL	=10 µl

PCR 58 in pSB1C3 (p133)

Substance	Volume
P133	1.2 µl (~50 ng vector dna)
PCR 58	16.5 µl (~6x of n(vector))
T4 ligase	0.5
T4 ligase buffer	2.5 µl
TOTAL	=20.7 µl

Negative control/pYES (p175)

Substance	Volume
P175	0,5 µl (~50 ng vector dna)
T4 ligase	0.25
T4 ligase buffer	1 µl
ddH2O	8.25 µl
TOTAL	=10 µl

Negative control/pSB1C3 (p133)

Substance	Volume
P133	1.2 µl (~50 ng vector dna)
T4 ligase	0.5
T4 ligase buffer	2.5 µl
TOTAL	=25 µl

ligation for 2 h at room temperature.
5 µl of ligation product was transformed. The remaining products were incubated at 16 °C (waterbath) for the weekend.

Gel extraction of digested product

Investigator: Lara

Aim: Extract digested prepro-thaumatin for further ligation.

Due to previous phosphatase treatment (and presumably application of only 20 µl on the preparative gel), concentrations of products were very low:

P343: 5 ng/µl
P344: 5 ng/µl
P345: 5 ng/µl
pSB1C3: 9 ng/µl
pYES: 7 ng/µl

Digested products are stored in a disposal bag at the upper drawer of -20°C (label: Andrea, miniprep 16.8.)

Analytical restriction digest of miniprep (miniprep 16.8., ligations 31.7. and 7.8.)

Investigators: Katrin (digest), Lara (gelelectrophoresis)

Aim: Check whether ligations have worked (transformation products of 3.8. (ligation 31.7.) & 8.8. (ligation 7.8.))

volume	reagent
3 µl	plasmid DNA
0.5 µl	Not 1
2 µl	Puffer O (Fermentas)
14.5 µl	ddH2O

Gelelectrophoresis:

Gel1: Gene Ruler 1kb, 1, 2, 3, 4, 5, 6, 7, 8, 9

Gel2: Gene Ruler 1kb, 10, 11, 12, 13, 14, 15, 16, 17

Gel3: Gene Ruler 1kb, 18, 19, 20, 21, 22, 23, 24

Transformation of ligation products

Investigator: Lara

Aim: Transform E.coli XL 1 blue with ligation products (PCR42/p133, PCR42/p175, PCR43/p133, PCR43/p175, PCR56/p133, PCR56/p175, PCR57/p133, PCR57/p175, PCR58/p133, PCR58/p175) to produce colonies containing plasmid DNA.

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
adding of 5 µl of ligation products
incubation for 30 min on ice
heat shock for 5 min at 37 °C
adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
plating of 100 µl of the cells on an Amp-plate (pYES (P175) or Chloramphenicol-plate (pSB1C3, P133)
sedimentation of the leftover in a centrifuge (60 sec, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Isolation of of plasmids pUCIDT_Insert and pSB1C3

Investigator: Roman

Aim: Isolation of plasmids pUCIDt_CaXMT1, pUCIDT_CaMXMt1, pUCIDT_CaDXMT1 and pSB1C3_CHS- out of 6 ml of an over night culture (2-fold batch for each plasmid)

Operational sequence:

Plasmids were isolated as described in the manufacturers protocoll (Quiagen). Elution was performed with 50µl buffer EB in one step.

Determined concentrations:

pUCIDT_CaXMT1 A: 170 ng/µl
pUCIDT_CaXMT1 B: 156 ng/µl
pUCIDT_CaXMT1 A: 144 ng/µl
pUCIDT_CaXMT1 B: 143 ng/µl
pUCIDT_CaXMT1 A: 128 ng/µl
pUCIDT_CaXMT1 B: 100 ng/µl
pSB1C3_CHS- A: 73 ng/µl
psb1C3_CHS- B: 108 ng/µl

Restriction digest of isolated plasmids

Investigator: Roman

Aim: Digest of plasmids with Xba1 and Pst1 to gain the caffeine- synthesis genes and pSB1C3 backbone, respectively.

Operational Sequence:

For restriction digest, the isolated plasmids pUCIDT_CaXMT1A, pUCIDT_CaMXMT1A, pUCIDT_CaDMT1A and pSB1C3_CHS-B were used (highest concentrations).

Reaction batch:

reagent	volume
ddH2O	13,6 µl
Plasmid-DNA	20 µl
Enzyme Pst1HF	1 µl
Enzyme Xba1	1 µl
10x NEB Buffer 4	4 µl
BSA 100x	0,4 µl
TOTAL	40 µl

The reaction batch was incubated at 37°C für 1.5 h. Afterwards, the fragments were seperated by preparative agarose gel electrophoresis (see picture below).

Gel- picture 1:

From left to right:

DNA- Ladder

pUCIDT_CaXMT1_Xba1Pst1

pUCIDT_CaMXMT1_Xba1Pst1

pUCIDT_CaXMT1_uncut

Gel- picture 2:

From left to right:

DNA- Ladder

pUCIDT_CaDXMT1_Xba1Pst1

pSB1C3_CHS-_Xba1Pst1

pSB1C3_CHS-_uncut

Gel extraction and NanoDrop determination of separated DNA fragments

Investigator: Roman

Aim: Extraction of DNA fragments and determination of concentration previously to the ligation

Operational sequence: The extraction was performed as described in the manufacturers protocoll (Quiagen). Elution was performed with 30µl water (bidestillated) instead of elution buffer. Furthermore, the water has been heated up to 50°C and also the incubation before final centrifugation was performed on the heating block at 50°C.

NanoDrop determination

CaXMT1: 21,4 ng/µl
CaMXMT1: 15,1 ng/µl
CaDMT1: 20,6 ng/µl
pSB1C3: 20 ng/µl

(all digested with Xba1 and Pst1)

Ligation of genes envolved in caffeine synthesis into pYES2new and pSB1C3

Investigator: Roman

Aim: Ligation of the genes, which are responsible for caffeine synthesis, into pYES2new (for further expression studies) and pSB1C3 (to create BioBricks).

Operational Sequence:

The following reaction batch refers to a molar ratio of 1:3 between vector and insert.

Reaction batch:

reagent	volume
pYES2new	1,5 µl (ca. 120 ng)
InsertA: CaXMT1	3,5 µl (ca. 70 ng)
InsertB: CaMXMT1	5 µl (ca. 70 ng)
InsertC: CaDXMT1	3,5 µl (ca. 70 ng)
Ligase	1 µl
10x Ligase Buffer	2 µl
ddH2O	ad 20 µl

The batch was incubated over the weekend at 16°C in the water bath.

Saturday, August 18th

Picking of plated transformated E. coli XL1-Blue colonies with ligated P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Picking of plated E. coli XL1-Blue colonies, transformed with ligated P207+PCR69 and P207+PCR70 on August, the 17th.

Procedure:

10 colonies of each transformation from P207+PCR69 (CamR) and P207+PCR70 (CamR) transformated cells were picked.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put 10 h in a 180 rpm cell culture shaker at 37 °C.

Colony PCR of clones of PCR58/p133 (transformation 17.8.)

Investigator: Lara

Aim: Introduce new method to allow for higher throughput of clone screenings.

make sure you have PCR tubes and cell culture tubes labeled sufficiently. you need to have one pcr tube and one cell culture tube for each colony.
pick a colony with a sterile toothpick or pipet tip, smear some of the cells onto the wall of the pcr tube (a bit of pressure and smearing) and subsequently put the toothpick into a cell culture tube with LB-medium and antibiotic.

19 Clones of PCR58/p133 (transformation of August 17th) were picked + 1 clone of 4CL+(PCR15)/p132 as positive control

volume	reagent
2 µl	5x OneTaq Standard Reaction Buffer
1 µl	10 mM dNTPs
0.15 µl	40 µM O68
0.15 µl	40 µM O69
0.1 µl	OneTaq Hot Start DNA Polymerase
1 µl	Plasmid DNA (BBa_I742111) Clone 3
5.6 µl	dd water
10 µL	TOTAL

The PCR program was performed after following scheme:

Initial denaturation	95 °C	6 min
35 cycles	95 °C	30 s
	53 °C	30 s
	72 °C	1.75 min
Final extension	72 °C	10 min
Hold	4 °C	1 h

Colony PCR failed (and/or failed ligation, in case "negative" positive control was picked)

Analytical restriction digest of different clones

Investigator: Lara

Aim: Repetition of analytical digestion of products of miniprep on August 16th (clone 6,11,24) and August 10th (PCR56/p175 clone 1; PCR56/p175 clone 3; PCR57/p175 clone 2, PCR58/p175 clone 1)

volume	reagent
5 µl	plasmid DNA
0.3 µl	Xba1
0.3 µl	Spe1
2 µl	NEBuffer 4
0.2 µl	BSA (100x)
12.2 µl	ddH2O

Incubation for 1 h at 37°C.

Sunday, August 19th

Miniprep of the overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Miniprep of the overnight culture of transformated E. coli XL1-Blue with with ligated P207+PCR69 and P207+PCR70.

Procedure:

Miniprep was done with the Qiagen Qiaprep spin miniprep kit and was performed after manufacturer's protocol.

Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps of transformated E. coli XL1-Blue with ligation products of P207+PCR69 and P207+PCR70.

Procedure:

Mastermix for analytical digestion with XbaI+AgeI-HF:

volume	reagent
42 µl	NEBuffer 4 (10x)
4.2 µl	BSA (100x)
5.25 µl	XbaI (20 U/µl)
5.25 µl	AgeI-HF (20 U/µl)
310.8 µl	ddH2O
=367.5 µl	TOTAL

17.5 µl of the mastermix for XbaI+AgeI-HF was added to 2.5 µl of prepped plasmid DNA of P408-P427.

Analytical gelelectrophoresis was performed at 90 V for 1 h.

100 bp ladder DNA ladder	P408	P409	P410	P411	P412	P413	P414	P415	P416	P417	1 kbp ladder DNA ladder
	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!	Ligation successful! Gal4DBD ready for protein fusion!

100 bp ladder DNA ladder	P418	P419	P420	P421	P422	P423	P424	P425	P426	P427	1 kbp ladder DNA ladder
	Ligation failed!	Ligation failed!	Ligation failed!	Ligation failed!	Ligation successful! PhyB(908-NT) ready for protein fusion!	Ligation failed!	Ligation failed!	Ligation failed!	Ligation failed!	Ligation failed!

Picking Clones for Ingma and Roman

Investigator: Volker

4 Clones for each plate were picked in apropiate media at 1.40 AM => please do not prep before 12 AM!
Eight of them are in the 30° incubator on the right side. If you read this at the right time please put them into the 37°C incubator if there is not some space and prep them in the second round. Thanks!

From Ingmas plates p187, p196 and p193 no clones could be picked because there were no single colonies
on all positive plates there was a sufficient number of clones (50-300)
Romans negative controle plates had no (Bneg) and 6 (Yneg) clones which is good / acceptable
on all positive plates there was a sufficient number of clons (30-200)

Week 11

Limonene (21 Experiments):

Coumaryl (7 Experiments):

Thaumatin (8 Experiments):

Caffeine (12 Experiments):

Constitutive Promoter (28 Experiments):

Light Switchable Promoter (24 Experiments):

Show Details ...

Monday, August 20th

Preperative digestion and gelelectrophoresis of P422, P331, P417, P290

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P422 (AgeI+PstI-HF), P331 (NgoMIV+PstI-HF), P417 (NgoMIV+PstI-HF), P290 (XbaI+PstI).

Procedure:

Reaction batch for P422:

volume	reagent
20 µl	P422
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	AgeI(20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch for P331:

volume	reagent
20 µl	P331
4 µl	NEBuffer 4 (10x)
2 µl	NgoMIV(10 U/µl)
1 µl	PstI-HF (20 U/µl)
13 µl	ddH2O
=40 µl	TOTAL

Reaction batch for P417:

volume	reagent
20 µl	P417
4 µl	NEBuffer 4 (10x)
2 µl	NgoMIV(10 U/µl)
1 µl	PstI-HF (20 U/µl)
13 µl	ddH2O
=40 µl	TOTAL

Reaction batch for P290:

volume	reagent
20 µl	P290
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI(20 U/µl)
1 µl	AgeI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

These reaction batches were incubated for 3 h at 37 °C.

Following gelelectrophoresis was performed with whole digestion batch after adding 4.44 µl of DNA loading buffer (10x) to each digestion batch at 70 V for 1.5 h on 1% low-melting agarose gel.

Pocket order:

P422 (AgeI-HF+PstI-HF)	100 bp DNA ladder	P331 (NgoMIV+PstI-HF)	1 kbp DNA ladder
Backbone incl. PhyB was cut out		Insert was cut out

Pocket order:

P417 (NgoMIV+PstI-HF)	100 bp DNA ladder	P290 (XbaI+PstI-HF)	1 kbp DNA ladder
Insert was cut out		Backbone was cut out

Sequencing of P395, P398, P422, P331, PCR2/P133 Klon 4

Investigator: Jeff

Aim of the experiment: Sequencing of P395, P398, P422, P331, PCR2/P133 Klon 4.

Procedure:

Plasmid concentrations were measured by nanodrop to calculate the dilution factor to have a concentration between 50 ng/µl and 100 ng/µl.

Plasmid concentration, determinated by nanodropping.

Plasmid	Concentration in ng/µl
P395	465.6
P398	391.8
P422	375.8
P331	210.9
PCR2/P133 Klon 4	469.1

To get an end concentration between 50-100 ng/µl and an end volume of 15 µl, the dilution was performed as following:

Plasmid	Concentration in ng/µl
P395	1:5 dilution: 3 µl plasmid + 12 µl ddH2O
P398 dilution:	1:4 dilution: 3.75 µl plasmid + 11.25 µl ddH2O
P422	1:4 dilution: 3.75 µl plasmid + 11.25 µl ddH2O
P331	1:3 dilution: 5 µl plasmid + 10 µl ddH2O
PCR2/P133 Klon 4	1:5 dilution: 3 µl plasmid + 12 µl ddH2O

Also the VF2 forward primer must have a end concentration of 2 ng/µl. So a mastermix for everybody was done with O68 (100 ng/µl)

O68 (VF2, 100 pmol/µl)	20 µl
ddH2O	980 µl
TOTAL (2 pmol/µl)	1000 µl

15 µl was sent with each of P422, P331 and PCR2/P133 Klon 4 in a seperate ERG.

Ligation of P436+P437 and P206+P438

Investigator: Jeff

Aim of the experiment: Ligation of P436+P437 (PhyB(908NT) + 20aaLinker-LexA)and P206+P438 (20aaLinker + Gal4DBD.

Procedure:

Reaction batch for P436+P437:

volume	reagent
1.11 µl	P436
4.21 µl	P437
2 µl	T4 ligase buffer (10x)
0.5 µl	T4 ligase (1 U/µl)
12.18 µl	ddH2O
=20 µl	TOTAL

Reaction batch for P206+P438:

volume	reagent
1.69 µl	P207
4.92 µl	P438
2 µl	T4 ligase buffer (10x)
0.5 µl	T4 ligase (1 U/µl)
10.89 µl	ddH2O
=20 µl	TOTAL

These ligation batches including their negative controls, which only contain ddH2O instead of the insert, were put on a 16 °C waterbath and were incubated overnight.

Ligation of pYES2 without f1-origin and Gal-promoter

Reaction batch for pYes2 circulation:

volume	reagent
10,5 µl	T4-Ligase
6,72 µl (100 ng)	Dig. pYes 2
10 µl	PEG 4000
10 µl	10,5 x T4 ligase buffer
68,28 µl	H20
= 106 µl	total

The mastermix was heated up to 72 C for 5 min bevore T4 ligase was added. It was separated in one reaction at room temperature and one reaction over night at 16 C.

Transformation of E.coli Xl1-blue

To 100 µl competent cells of E. coli Xl1-blue 10 µl of the pYes II Ligation reaction were added. Cells were kept on ice for 30 minutes. Heatshock was done at 37 C for 5 minutes Cells were incubated for 45 minutes in 1 ml LB-medium at 37 C Transformed cells were transferred on Agar plates with ampicillin

Preparative gelrun of TEF1-p, ADH1-p psb1c3 after digestion with PstI-HF and SpeI-HF

After preparative digestion with PstI and SpeI, 44,4 µl of each reaction were transferred onto an agarose gel. Gelrun was performed at 70 Volt for 90 min.

Picking colonies of E.coli Xl1-blue, transforemed with Tef2-p + psb1c3 and Cyc-t + psb1c3

15 colonies from Tef2-p and 6 from Cyc-t were picked and transferred into LB-medium with 1x Chloramphenicole. Incubation was performed over night at 37 C.

Colony PCR

Investigator: Lara

Aim: Establish colony PCR to increase speed of clone screening.

make sure you have PCR tubes and cell culture tubes labeled sufficiently. you need to have one pcr tube and one cell culture tube for each colony.
pick a colony with a sterile toothpick or pipet tip, smear some of the cells onto the wall of the pcr tube (a bit of pressure and smearing) and subsequently put the toothpick into a cell culture tube with LB-medium and antibiotic.

Citrus: 8 clones of PCR43/p175 were picked.
Lavendula: 8 clones of PCR58/p133 (5 clones of transformation of August 17th, 3 clones of August 8th) and PCR58/p175 (8 of transformation of August 17th) were picked
plasmid DNA of PCR2/p133 clone 4 as positive control

Citrus

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O28
0.5 µl	10 µM O30
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Lavendula

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O35
0.5 µl	10 µM O37
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

PCR program:

Initial denaturation	94 °C	10 min
30 cycles	95 °C	30 s
	59 °C	30 s
	68 °C	1 min 55 sec
Final extension	68 °C	5 min
Hold	4 °C

Labels of the cell culture tubes/PCR tubes:

1-8: PCR43/p175

9: PCR2/p133 clone 4 (positive control)

10-17: PCR58/p175

18-22: PCR58/p133, transformation of August 17th

23-25: PCR58/p133, transformation of August 8th

Miniprep

Investigator: Dennis

Aim: Miniprep of over night cultures with number 1,2,4,6,7,9,12,13,15,16,18 (clones that were picked for colony PCR on saturday, PCR58/p133).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Miniprep does not work.

Miniprep

Investigator: Saskia

Aim: Miniprep of over night cultures with number 3,5,8,10,11,14,17 (clones that were picked for colony PCR on saturday, PCR58/p133).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation.

Number	Concentration in ng/µl
3	254.7
5	223.4
8	339.4
10	303.5
11	162.4
14	142.1
17	151.8

Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C. (Falcon tube label: Miniprep Saskia 20.8.)

Ligation of insert and pYes

Investigator: Martin y Aloís

Aim: Ligate the extracted plasmids of the experiment before

Due to the small yield we only were able to run 4 ligations:

  1: pSB1C3 and P343
  I: pSB1C3 and P343 OVER NIGHT at 16 °C
  4: pYes and P343
 IV: pYes and P344 OVER NIGHT at 16 °C

1 and 4 were directly transformed in E. Coli - to be picked the next day.

Transformation of over-weekend ligation of caffeine synthesis genes in pSB1C3 and pYES2new

Investigator: Saskia

Aim: Transformation of the ligation

Operational Sequence

The transformation procedure was carried out as previously described, whereas the entire ligation batch was used for transformation in XL1 blue chemo competent e.coli-cells. The 30 minutes on ice incubation was followed by the heat shock at 37°C for 5 minutes and an incubation at 180 rpm at 37°C for about 45 minutes. Afterwords, the suspension was plated on appropriate plates (pSB1C3 transformants with chloramphenicol, pYES2new transformants with ampicillin) and incubated at 37°C over night. Besides, the pellet was also plated out (resuspension in about ca. 100 µl LB medium).

Note: This transformation was performed without knowing, that a transformation with 5 µl of every ligation batch was already done on saturday. Furthermore, clone picking and preparing of over night liquid cultures was made, too (on sunday).

Miniprep of picked clones of possible positive pSB1C3_Caffeine_involved_gene and pYES2new_caffeine_involved_gene transformants

Investigator: Roman, Saskia

Aim:

Isolation of plasmids pSB1C3 and pYES2, to check for uptaken inserts by an analytical restriction digest.

Operational sequence:

The putative positive clones were picked and used for inoculation on monday, 1 am. Thus, the plasmid preparation took place at 3 pm. Four clones of each plate had been picked. The plates were stored in the fridge, at 4°C. The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation.

Plasmidconcentration: Nanodroplet

pSB1C3_Caffeine_involved_gene	Concentration in ng/µl
B1A	196.5
B1B	220.6
B1C	203.8
B1D	190.6
B2A	273.1
B2B	225.2
B2C	209.2
B2D	161.7
B3A	235.3
B3B	228.5
B3C	228.1
B3D	226.4

pYES2new_caffeine_involved_gene	Concentration in ng/µl
Y1A	117.5
Y1B	200.9
Y1C	175.8
Y1D	206.7
Y2A	266.1
Y2B	306.2
Y2C	290.6
Y2D	302.7
Y3A	278.4
Y3B	162.7
Y3C	117.6
Y3D	211.3

Analytical digest of pSB1C3_Caffeine_involved_gene and pYES2new_caffeine_involved_gene plasmids

Investigator: Saskia

Aim:

Analytical digest of B1A-D, B2A-D, B3A-D, Y1A-D, Y2A-D, Y3A-D with PstI ans XbaI to controll the ligation of the inserts in pSB1C3 and pYES2new.

Procedure:

Digestion reaction batch

volume	reagent
2.5 µl	Plasmid-DNA
0.25 µl	XbaI
0.25 µl	PstI-HF
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
14.8 µl	ddH2O
=20 µl	TOTAL

Digestion over night at 37 °C.

Tuesday, August 21st

Transformation of overnight ligation with P436+P437 and P206+P438 in E. coli XL1-Blue

Investigator: Jeff

Aim of the experiment: Transformation of overnight ligation with P436+P437 and P206+P438 in E. coli XL1-Blue.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of the ligation products (P436+P437 and P206+P438) and their negative controls (P436 NK, P206 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on new chloramphenicol plates.

Incubation at 37 °C overnight.

Miniprep of overnight cultures of TEF2-P in psb1c3 and CYC-T in psb1c3

Investigator: Georg

Procedure:

Plasmid extraction from over-night grown colonies was done according to the protocoll of Quiaprep Spin genextraction kit.

Analytical digestion of TEF2-P and Cyc-T in psb1c3

Investigator: Georg

Aim of the experiment: To find positive clones of TEF2-P and Cyc-T

Procedure

Reaction batch for digestion:

volume	reagent
5,5 µl	PstI-HF (NEB)
5,5 µl	XbaI (NEB)
44 µl	NEB-4 buffer
4,4 µl	100 x BSA (NEB)
325,6 µl	dd H20
=385µl	TOTAL

to 2,5 ml of DNA 17,5 µl reaction batch were added
Digestion took place at 37°C for 1 h

Analytical gel with Transformants of TEF2-P and CYC-T in psb1c3-Vector

Investigator: Georg

Aim of the experiment: Find positive clones

9 µl of analytical digestion was applicated onto a 1% analytical agarose gel
Run was performed at 90 Volt for 1h
Result: Gelrun showed only two positive TEF2 clones and no CYC-T clone

Transformation of overnight ligation with P265B (pYes-TUM)

Investigator: Georg

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on ampicillin plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Preparative digestion of P451 (TEF2-P in psb1c3) with SpeI-HF and PstI-HF

Investigator:Georg, Dennis

Aim of the experiment: Prepare TEF2-P for cloning

Procedure

Reaction batch for digestion:

volume	reagent
1 µl	PstI-HF (NEB)
1 µl	Spe-HF (NEB)
0,4 µl	100xBSA (NEB)
4 µl	NEB-4 buffer
20 µl	P 451
13,6 µl	dd H20
=40 µl	TOTAL

Digestion took place at 37 C for 3 hours

Miniprep of "positive" colonies of colony PCR

Investigator: Lara

Aim: Get plasmid DNA of the plasmids that were identified as insert-positive clones.

Clones 2, 8, 11, 13, 18 & 20 of colony PCR (20.8.) were miniprepped.

Clone 2: 214 ng/µl
Clone 8: 142 ng/µl
Clone 11: 152 ng/µl
Clone 13: 252 ng/µl
Clone 18: 132 ng/µl
Clone 20: 210 ng/µl

Plasmid DNA is stored in a 50 ml Falcon tube at the lowest drawer of -20°C. (label: Miniprep 21.8. Lara)

Analytical restriction digest of miniprep products 21.8. ("positive" clones of colony PCR) and miniprep products 20.8.

Investigator: Lara

Aim: Check whether clones contain insert. Gel 1: Some clones that were picked for colony PCR of Saturday, August 18th. Gel 2: Clones that were identified as positive in colony PCR of Monday, August 20th.

volume	reagent
5 µl	plasmid DNA
0.25 µl	Xba1
0.25 µl	Spe1
2 µl	NEBuffer 4
0.2 µl	BSA (100x)
12.3 µl	ddH2O

digest at 37°C for 2.5h.

Colony PCR

Investigator: Lara

Aim: To decrease number of false positive PCR products, a different primer combination was used: Instead of forward + reverse primers for the insert, the forward primer of the vector backbone and the reverse primer of the insert were used.

extension time of PCR reaction was adjusted to the longer PCR product (insert+primers+backbone from primer binding site)
annealing temperature was adjusted to lowest primer melting temperature

Citrus: 5 clones of PCR42/p133 (transformation of 8.8.) and PCR42/p175 (trafo 17.8.) were picked.
Lavendula: 5 clones of PCR56/p133 (trafo 17.8.) and PCR56/p175 (transformation of August 17th) were picked.
positive control: plasmid DNA of PCR2/p133 clone 4 as positive control
negative controls: 1. clone containing pSB1C3 with proteinlinker (Jeff); 2. ddH2O; 3. clone containing pYES (P50, no insert)

Citrus in pSB1C3 (PCR42/p133)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O68
0.5 µl	10 µM O30
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Citrus in pYES (PCR42/p175)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O8
0.5 µl	10 µM O30
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Lavendula in pSB1C3 (PCR56/p133)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O68
0.5 µl	10 µM O37
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Lavendula in pYES (PCR56/p175)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O8
0.5 µl	10 µM O37
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

PCR program:

Initial denaturation	94 °C	10 min
30 cycles	95 °C	30 s
	50 °C	30 s
	68 °C	1 min 55 sec
Final extension	68 °C	5 min
Hold	4 °C

Labels:

1-5: PCR42/p133 (Trafo 8.8) 6: PCR2/p133 clone 4 (positive control, trafo 8.8.) 7: pSB1C3 neg. control (proteinlinker) 8-12: PCR56/p133 13-17: PCR42/p175 18: neg. control: ddH2O 19: p50 clone 20-24: PCR56/p175

Miniprep of ligation of 17th August

Investigator: Andrea

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 50 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation.

Number	Concentration in ng/µl
PCR56 in P133 (clone 1)	63.7
PCR56 in P133 (clone 2)	50.6
PCR56 in P133 (clone 3)	63.3
PCR56 in P133 (clone 4)	77.9
PCR56 in P133 (clone 5)	82.1
PCR56 in P175 (clone 1)	94.3
PCR56 in P175 (clone 2)	50.6
PCR56 in P175 (clone 3)	55.9
PCR56 in P175 (clone 4)	120.9
PCR56 in P175 (clone 5)	119.4
PCR 57 in P133 (clone 1)	47.6
PCR 57 in P133 (clone 2)	185.1
PCR 57 in P133 (clone 3)	60.9
PCR 57 in P133 (clone 4)	61.3
PCR 57 in P133 (clone 5)	57.0
PCR57 in P175 (clone 1)	113.4
PCR57 in P175 (clone 2)	67.7
PCR57 in P175 (clone 3)	116.1
PCR57 in P175 (clone 4)	66.2
PCR57 in P175 (clone 5)	47.5
PCR42 in P133 (clone 1)	66.2
PCR42 in P133 (clone 2)	131.9
PCR42 in P175 (clone 1)	154.4
PCR42 in P175 (clone 2)	72.2
PCR42 in P175 (clone 3)	105.8
PCR42 in P175 (clone 4)	109.0
PCR42 in P175 (clone 5)	116.4
PCR1 in P175 (clone 1)	121.6
PCR1 in P175 (clone 2)	94.8
PCR1 in P175 (clone 3)	123.5
PCR1 in P175 (clone 4)	103.7
PCR1 in P175 (clone 5)	106.9

Miniprep products are stored in a disposal bag in the middle drawer at -20°C. (label: Miniprep 21.08. Andrea)

numbering:

1: PCR 56 in P133 clone 1

2: PCR 56 in P133 clone 2

3: PCR 56 in P133 clone 3

4: PCR 56 in P133 clone 4

5: PCR 56 in P133 clone 5

6: PCR 56 in P175 clone 1

7: PCR 56 in P175 clone 2

8: PCR 56 in P175 clone 3

9: PCR 56 in P175 clone 4

10: PCR 56 in P175 clone 5

11: PCR 57 in P133 clone 1

12: PCR 57 in P133 clone 2

13: PCR 57 in P133 clone 3

14: PCR 57 in P133 clone 4

15: PCR 57 in P133 clone 5

16: PCR 57 in P175 clone 1

17: PCR 57 in P175 clone 2

18: PCR 57 in P175 clone 3

19: PCR 57 in P175 clone 4

20: PCR 57 in P175 clone 5

21: PCR 42 in P133 clone 1

22: PCR 42 in P133 clone 2

23: PCR 42 in P175 clone 1

24: PCR 42 in P175 clone 2

25: PCR 42 in P175 clone 3

26: PCR 42 in P175 clone 4

27: PCR 42 in P175 clone 5

28: PCR 1 in P175 clone 1

29: PCR 1 in P175 clone 2

30: PCR 1 in P175 clone 3

31: PCR 1 in P175 clone 4

32: PCR 1 in P175 clone 5

Analytical restriction digest of miniprep (miniprep 21.08.)

Investigators: Andrea

Aim: Check whether ligations have worked (ligation of 17th August)

volume	reagent
3 µl	plasmid DNA
0.5 µl	Xba 1
0.5 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
12.2 µl	ddH2O

Mastermix for 33 reactions (9.9 µl XbaI, 9.9 µl SpeI, 66 µl NEB, 6.6 µl BSA, 402.6 ddH2O)
5 µl DNA were added to 15 µl Mastermix

Gelelectrophoresis:

expected:

Limonensynthase 1600 bp

pYES2 (P175) 5800 bp

pSB1C3 (P133) 2000 bp

positive ligations:

Gel 2, PCR57 in P133 (pSB1C3), Klon 2

Gel 3, PCR1 in P175 (pYES2), Klon 2

Miniprep of 4CL in psB1C3 and pYES after Quick Change from August 17th

Investigator: Saskia, Daniela

Overnight culutres were grown too long. To obtain bacteria with plasmids we exchanged the media and let them grow for another 6 hours. A Miniprep was done afterwards.

Using a Quiagen Miniprep kit, a plasmid isolation of three picked clones of a APT in pYes2 RFC25 ligation was done.

The resulting plamid-concentrations (measured with nanodrop) were:

4CL- pYES clone 1: 181.8 ng/µl

4CL- pYES clone 2: 167.5 ng/µl

4CL- pYES clone 3: 158.3 ng/µl

4CL- pYES clone 4: 136.2 ng/µl

4CL+ pYES clone 1: 88.4 ng/µl

4CL+ pYES clone 2: 143.5 ng/µl

4CL+ pYES clone 3: 144.4 ng/µl

4CL+ pYES clone 4: 104.9 ng/µl

4CL- pSB1C3 clone 1: 170.4 ng/µl

4CL- pSB1C3 clone 2: 248.8 ng/µl

4CL- pSB1C3 clone 3: 231.1 ng/µl

4CL- pSB1C3 clone 4: 254.2 ng/µl

4CL+ pSB1C3 clone 1: 272.8 ng/µl

4CL+ pSB1C3 clone 2: 220.5 ng/µl

4CL+ pSB1C3 clone 3: 220.1 ng/µl

4CL+ pSB1C3 clone 4: 170.1 ng/µl

Analytical DNA-gelelectrophoresis of pSB1C3_Caffeine_involved_gene and pYES2new_caffeine_involved_gene plasmids after digestion with PstI and XbaI

Investigator: Roman, Saskia

Aim:

Analytical DNA-gelelectrophoresis of B1A-D, B2A-D, B3A-D, Y1A-D, Y2A-D, Y3A-D with PstI ans XbaI to controll the ligation of the inserts in pSB1C3 and pYES2new.

Procedure: Analytical gelelectrophoresis was performed at 90 V for 1 h.

Gel 1 up:

1 kp ladder DNA ladder

B1A

B1B

B1C

B1D

B2A

B2B

B2C

B2D

B3A

B3B

B3C

Gel 1 below:

1 kp ladder DNA ladder

B1D

Y1A

Y1B

Y1C

Y1D

gel 2:

1 kp ladder DNA ladder

Y2A

Y2B

Y2C

Y2D

Y3A

Y3B

Y3C

Y3D

Result: All ligations were positive!

Preparation for transformation of pYESnew with caffeine genes in yeast

Investigator: Saskia

Aim:

Transformation of S. cerevisiae INVSc1 with pYESnew with CaXMT1, CaMXMT1 and CaDXMT1.

Procedure:

production of YPD medium as described in the pYES manual

Incubation of S. cerevisiae INVSc1 in 4 ml YPD as described in the pYES manual

Minipreparation of pYes2_Preprothaumatin_RFC10 and pSB1C3_Preprothaumatin_RFC10

Investigator: Martianus Capella, Albertus Magnus

Inoculation.

Wednesday, August 22nd

PCR of P395 to introduce RFC10 pre- and suffix to finished SV40-Gal4AD-Linker-Pif3 construct

Investigator: Jeff

Aim of the experiment: PCR of P395 to introduce RFC10 pre- and suffix to finished SV40-Gal4AD-Linker-Pif3 construct for further cloning into pSB1C3 for partsregistry.

Procedure:

PCR reaction batch was prepared as follows:

substrate	volume in µl
One Taq Standard Reaction Buffer (5x)	10
Plasmid template (P395)	1
Primer O75 (10 µM)	1
Primer O76 (10 µM)	1
dNTP (10 mM)	1
Polymerase One Taq	0,25
ddH2O	35.75

The PCR program was performed after following scheme with following conditions

Initial denaturation	94 °C	30 s
30 cycles	94 °C	30 s
	57 °C	60 s
	68 °C	60 s
Final extension	68 °C	5 min
Hold	4 °C	infinite

After PCR, PCR purification kit from Qiagen was used.

Sequencing results of P395, P398, P422, P331

Investigator: Jeff

Results:

P395:

CCATACGACGTACCAGATTACGCTCATATGGCCATGGAGGCCAGTGAATTGCCTCTGTTT
GAACTTTTCAGGCTCACCAAAGCTAAGCTTGAATCTGCTCAAGACAGGAACCCTTCTCCA
CCTGTAGATGAAGTTGTGGAGCTGGTGTGGGAAAATGGTCAGATATCAACTCAAAGTCAG
TCAAGTAGATCGAGGAACATTCCTCCACCACAAGCAAACTCTTCAAGAGCTAGAGAGATT
GGAAATGGCTCAAAGACGACTATGGTGGACGAGATCCCTATGTCAGTGCCATCACTAATG
ACGGGTTTGAGTCAAGACGATGACTTTGTTCCATGGTTGAATCATCATTAAGGATCCATC
GAGCTCGAGCTGCAGATGAATCGTAGATACTGAAAAACCCCGCAAGTTCACTTCAACTGT
GCATCGTGCACCATCTCAATTTCTTTCATTTATACATCGTTTTGCCTTCTTTTATGTAAC
TATACTCCTCTAAGTTTCAATCTTGGCCATGTAACCTCTGATCTATAGAATTTTTTAAAT
GACTAGAATTAATGCCCATCTTTTTTTTGGACCTAAATTCTTCATGAAAATATATTACGA
GGGCTTATTCAGAAGCTTTGGACTTCTTCGCCAGAGGTTTGGTCAAGTCTCCAATCAAGG
TTGTCGGCTTGTCTACCTTGCCAGAAATTTACGAAAAGATGGAAAAGGGTCAAATCGTTG
GTAGATACGTTGTTGACACTTCTAAATAAGCGAATTTCTTATGATTTATGATTTTTATTA
TTAAATAAGTTATAAAAAAAATAAGTGTATACAAATTTTAAAGTGACTCTTAGTTTTAAA
ACGAAAATTCTTATTCTTGAGTAACTCTTTCCTGTAGGTCAGTT

Sequence of interest matches the expectation

P398:

CATACGACGTACCAGATTACGCTCATATGGCCATGGAGGCCAGTGAATTGCCTCTGTTTG
AACTTTTCAGGCTCACCAAAGCTAAGCTTGAATCTGCTCAAGACAGGAACCCTTCTCCAC
CTGTAGATGAAGTTGTGGAGCTGGTGTGGGAAAATGGTCAGATATCAACTCAAAGTCAGT
CAAGTAGATCGAGGAACATTCCTCCACCACAAGCAAACTCTTCAAGAGCTAGAGAGATTG
GAAATGGCTCAAAGACGACTATGGTGGACGAGATCCCTATGTCAGTGCCATCACTAATGA
CGGGTTTGAGTCAAGACGATGACTTTGTTCCATGGTTGAATCATCATTAAGGATCCATCG
AGCTCGAGCTGCAGATGAATCGTAGATACTGAAAAACCCCGCAAGTTCACTTCAACTGTG
CATCGTGCACCATCTCAATTTCTTTCATTTATACATCGTTTTGCCTTCTTTTATGTAACT
ATACTCCTCTAAGTTTCAATCTTGGCCATGTAACCTCTGATCTATAGAATTTTTTAAATG
ACTAGAATTAATGCCCATCTTTTTTTTGGACCTAAATTCTTCATGAAAATATATTACGAG
GGCTTATTCAGAAGCTTTGGACTTCTTCGCCAGAGGTTTGGTCAAGTCTCCAATCAAGGT
TGTCGGCTTGTCTACCTTGCCAGAAATTTACGAAAAGATGGAAAAGGGTCAAATCGTTGG
TAGATACGTTGTTGACACTTCTAAATAAGCGAATTTCTTATGATTTATGATTTTTATTAT
TAAATAAGTTATAAAAAAAATAAGTGTATACAAATTTTAAAGTGACTCTTAGTTTTAAAA
CGAAAATTCTTATTCTTGAGTAACTCTTTCCTGTAGTCAGTTGCTTTCTCAGGTATAGCA
TGAGGTCGCTCTTATTGACCACACCTCTACCGGCCGGTCGAAATTCCCCTACCCTATGAA
CATATTCCATTTTGTAATTTCGTGTCGTTTCTATTATGATTTCATTTATAAAGTTTATGT
ACAATATCAT

Sequence of interest matches the expectation

P422:

TATAAAATAGGCGTATCACGAGGCAGAATTTCAGATAAAAAAAATCCTTAGCTTTCGCTA
AGGATGATTTCTGGAATTCGCGGCCGCTTCTAGATGGCCGGCGTTTCCGGAGTCGGGGGT
AGTGGCGGTGGCCGTGGCGGTGGCCGTGGCGGAGAAGAAGAACCGTCGTCAAGTCACACT
CCTAATAACCGAAGAGGAGGAGAACAAGCTCAATCGTCGGGAACGAAATCTCTCAGACCA
AGAAGCAACACTGAATCAATGAGCAAAGCAATTCAACAGTACACCGTCGACGCAAGACTC
CACGCCGTTTTCGAACAATCCGGCGAATCAGGGAAATCATTCGACTACTCACAATCACTC
AAAACGACGACGTACGGTTCCTCTGTACCTGAGCAACAGATCACAGCTTATCTCTCTCGA
ATCCAGCGAGGTGGTTACATTCAGCCTTTCGGATGTATGATCGCCGTCGATGAATCCAGT
TTCCGGATCATCGGTTACAGTGAAAACGCCAGAGAAATGTTAGGGATTATGCCTCAATCT
GTTCCTACTCTTGAGAAACCTGAGATTCTAGCTATGGGAACTGATGTGAGATCTTTGTTC
ACTTCTTCGAGCTCGATTCTACTCGAGCGTGCTTTCGTTGCTCGAGAGATTACCTTGTTA
AATCCGGTTTGGATCCATTCCAAGAATACTGGTAAACCGTTTTACGCCATTCTTCATAGG
ATTGATGTTGGTGTTGTTATTGATTTAGAGCCAGCTAGAACTGAAGATCCTGCGCTTTCT
ATTGCTGGTGCTGTTCAATCGCAGAAACTCGCGGTTCGTGCGATTTCTCAGTTACAGGCT
CTTCCTGGTGGAGATATTAAGCTTTTGTGTGACACTGTCGTGGAAAGTGTGAGGGACTTG
ACTGGTTATGATCGTGTTATGGTTTATAAGTTTCATGAAGATGAGCATGGAGAAGTTGTA
GCTGAGAGTAAACGAGACGATTTAGAGCCTTATA

Partial sequence match the part (part is too long for one read)

P331:

TATAAAATAGGCGTATCACGAGGCAGAATTTCAGATAAAAAAAATCCTTAGCTTTCGCTA
AGGATGATTTCTGGAATTCGCGGCCGCTTCTAGATGGCCGGCGCGAGCGGCGCGGGCGGC
AGCGAAGGCGGCGGCAGCGAAGGCGGCACCAGCGGCGCGACCACCGGCAAAGCGTTAACG
GCCAGGCAACAAGAGGTGTTTGATCTCATCCGTGATCACATCAGCCAGACAGGTATGCCG
CCGACGCGTGCGGAAATCGCGCAGCGTTTGGGGTTCCGTTCCCCAAACGCGGCTGAAGAA
CATCTGAAGGCGCTGGCACGCAAAGGCGTTATTGAAATTGTTTCCGGCGCATCACGCGGG
ATTCGTCTGTTGCAGGAAGAGGAAGAAGGGTTGCCGCTGGTAGGTCGTGTGGCTGCCGGT
GAACCACTTCTGGCGCAACAGCATATTGAAGGTCATTATCAGGTCGATCCTTCCTTATTC
AAGCCGAATGCTGATTTCCTGCTGCGCGTCAGCGGGATGTCGATGAAAGATATCGGCATT
ATGGATGGTGACTTGCTGGCAGTGCATAAAACTCAGGATGTACGTAACGGTCAGGTCGTT
GTCGCACGTATTGATGACGAGGTTACCGTTAAGCGCCTGAAAAAACAGGGCAATAAAGTC
GAACTGTTGCCAGAAAATAGCGAGTTTAAACCAATTGTCGTAGATCTTCGTCAGCAGAGC
TTCACCATTGAAGGGCTGGCGGTTGGGGTTATTCGCAACGGCGACTGGCTGACCGGTTAA
TACTAGTAGCGGCCGCTGCAGTCCGGCAAAAAAACGGCAAGGTGTCACCACCCTGCCCTT
TTTCTTTAAAACCGAAAAGATTACTTCGCGTTATGCAGCTTCCTCGCTCACTGACTCGCT
GCGCTCGGTCGTTCGGCTGCGGCGAGCGGTATCAGCTCACTCAAAGGCGGTAATACGGTT
ATCCACAGAATCAGGGGATAACGCAGGAAGACAT

3 synonymous well-known point-mutation, the rest matches expectation.

Picking of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437.

Procedure:

6 colonies of each transformation from P207+PCR69 (CamR) and P207+PCR70 (CamR) transformated cells were picked.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Transformation of E. coli XL1-Blue with P422

Investigator: Andrea

Aim of the experiment: Transform E. coli XL 1 blue with P422 to backup it.

Procedure:

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
adding of 1 µl of DNA
incubation for 30 min on ice
heat shock for 5 min at 37 °C
adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
plating of 100 µl of the cells on an Chloramphenicol-plate
sedimentation of the leftover in a centrifuge (2 min, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Preparative digestion of P451 (TEF2-P in psb1c3)

Investigator: Georg

Reaction batch for digestion:

volume	reagent
1 µl	PstI-HF (NEB)
1 µl	SpeI-HF (NEB)
4 µl	10xNEB-4 buffer
0,4 µl	100 x BSA (NEB)
20 µl	P 451
13,6 µl	dd H20
=40µl	TOTAL

to 20 of DNA 20 µl reaction batch were added
Digestion took place at 37°C for 3 h

Nanodrop measurement

Investigator: Georg

ADH1-P (720 bp) Kol1: 24,9 ng/µl
ADH1-P (720 bp) Kol2: 38,6 ng/µl
ADH1-P (720 bp) Kol3: 42,1 ng/µl
ADH1-P (720 bp) Kol4: 42,5 ng/µl

Preparative gel of TEF1-P (P309), TEF2-P (P451) in psb1c3 and pYESII without GAL-P and f1

Preparative digests were loaded onto 1% preparative agarose gels
Gel run at 70 V for 3 hours
DNA bands were cut out
DNA was extracted according to Quiaquick gel purification Kit (salt removed)

Transformation of E.coli Xl1-blue competent cells with Preprothaumatin, TEF2-P (P351), and ADH1-P (720 bp)in psb1c3

Investigator: Georg

Aim of the experiment: To get a stock of TEF2p, Thaumatin and ADH1-P (720 bp)

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

1 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on Chloramphenicol plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new Chloramphenicol plates.

Preparative Digestion of P375 (pYesII)

Investigator: Georg

Aim of the experiment: Digestion of pYesII with SwaI and PvuII for new ligation reaction to generat pYesII-TUM

Procedure:

Reaction batch for digestion:

volume	reagent
2 µl	SwaI(NEB)
2 µl	PvuII (NEB)
4 µl	NEB-3 buffer
0,4 µl	100 x BSA (NEB)
11,6 µl	dd H20
=40µl	TOTAL

pYes was first digested with SwaI and BSA at room temperature. Afterwards PvuII was added and digested for another 3 hours at 37°C

Control digest of pYes2_Preprothaumatin and pSB1C3_Preprothaumatin

Investigator: Cicero, Platon

Aim: Is the insert integrated?

Miniprep of p453-p462.

Analytical digest:

pSB1C3_Preprothaumatin: 6.25 µl (p453-457), 2 µl NEBuffer 4, 0.2 µl BSA, 0.25 µl XbaI. 0.25 µl SpeI, 11 µl ddH2O.
pYes2_Preprothaumatin: 6.25 µl (p458-462), 2 µl NEBuffer 4, 0.2 µl BSA, 0.25 µl XbaI. 0.25 µl SpeI, 11 µl ddH2O.
37°C, 1h.

Analytical gel electrophoresis: 1 kb marker, p453, p454, p455, p456, p457, p458, p459, p459, p460, p461, p462

Expected: pSB1C3_Preprothaumatin: backbone: 2.1 kb, insert 721 bp; pYes2_Preprothaumatin: backbone: 4.8 kb, insert: 721 bp.

Result: p456 and p457 were successful, the insert preprothamatin is integrated into pSB1C3.

Small scale yeast transformation with pYES2new_CaXMT1, pYES2new_CaMXMT1 and pYES2new_CaDXMT1

Investigator: Saskia, Roman

Aim: To transform our yeast strain saccharomyces cerevisiae INVSC1 -URA with the created pYES2new plasmids, to be able to start expression of our genes.

Operational sequence:

The transformation of the yeast cells was performed as described in the pYES2 Manual of Invitrogen (small scale yeast transformation).

Used plasmids pYES2_RFC25_Insert were previously isolated out of clones: Y1B, Y2D, Y3A

As positive control, we used a pYES2_eGFP plasmid (provided by Simon) and as negative control, no plasmid (water) was "transformed".

1xTE and 1xLiAc/40%PEG-3350/1xTE solution were created immediately before use and sterilized by steril- filtration. The other solutions had already been available (and had also been sterilized by steril- filtration).

The resuspended pellets were plated on adequate selective SC -URA plates (minimal, defined medium for yeast, without uracil, due to selection for pYES2new vector).

Plates were incubated at 30°C over night

Preparation of SC Minimal Medium

Investigator: Saskia, Roman

We prepared 3 l of SC Minimal Medium as described in the pYES manual on page 10. We mixed and autoclaved 50 ml of the already prepared SC-aliquots with 850 ml ELGA and 6.7 g Yeast Nitrogen Base. Additionally we prepared a 20 % glucose and two 20 % galactose solutions. Therefore we mixed 20 g galactose or glucose with 100 ml ELGA and autoclaved it. Note that you need more induction media with galactose than SC medium with glucose. And we don't use raffinose for the induction media.

Western Blot of APT at different times of expression in yeast

Investigator: Daniela

Aim of the experiment: Find out optimum time for expression.

SDS-PAGE:

Samples:

APT after 0 h
APT after 2 h -> not loaded correctly
APT after 4 h
APT after 6 h
APT after 8 h
APT after 11 h
APT after 21 h
GFP after 8 h (positive control)

10 µl of the samples (supernatant of the lysis reaction -> see August, 15th) were mixed with 2.5 µl 5xLaemmlired and denatured at 95 °C for 5 min.

12 % gel
120 V, 1.5 h

Blotting:

blotting of proteins on a nitrocellulose membrane (Whatman)
50mA, 1 h

Blocking:

wash 3x10min with PBS-T0.1
the membrane is blocked over night at 4 °C on a shaking device

Control digest of 4CL in pYES and pSB1C3-RFC25 after Quick Change from August 17th

Investigator: Daniela

Aim of the experiment: Test whether the Quick Change was successful

volume	reagent
2.5 µl	miniprep products
0.25 µl	Eco RI HF (20U/µl)
0.25 µl	PstI HF (20U/µl)
2 µl	NEB4
15 µl	ddH2O

Gel 1: 4CL in pYES

lane 1: 4CL- in pYES clone 1

lane 2: 4CL- in pYES clone 2

lane 3: 4CL- in pYES clone 3

lane 4: 4CL- in pYES clone 4

lane 5: 4CL+ in pYES clone 1

lane 6: 4CL+ in pYES clone 2

lane 7: 4CL+ in pYES clone 3

lane 8: 4CL+ in pYES clone 4

Gel 2: 4CL in pSB1C3-RFC25

lane 1: 4CL- in pSB1C3 clone 1

lane 2: 4CL- in pSB1C3 clone 2

lane 3: 4CL- in pSB1C3 clone 3

lane 4: 4CL- in pSB1C3 clone 4

lane 5: 4CL+ in pSB1C3 clone 1

lane 6: 4CL+ in pSB1C3 clone 2

lane 7: 4CL+ in pSB1C3 clone 3

lane 8: 4CL+ in pSB1C3 clone 4

The results are not unambiguous. Nevertheless the last Quick Change will be done on Friday 24th.

Repitition of analytical restriction digest and gel electrophoresis of miniprep (miniprep 21.08.)

Investigators: Andrea

Aim: Check whether ligations have worked (ligation of 17th August)

volume	reagent
3 µl	plasmid DNA
0.5 µl	Xba 1
0.5 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
12.2 µl	ddH2O

Gelelectrophoresis:

expected:

Limonensynthase 1600 bp

pYES2 (P175) 5800 bp

pSB1C3 (P133) 2000 bp

positive ligations:

PCR1 in P175 (pYES2), Klon 2

Transformation of positive ligation products

Investigator: Andrea

Aim: Transform E.coli XL 1 blue with ligation products (PCR58/p133 (Klon20) (Miniprep: 21rst August), PCR2/p133 (Klon 4) (Miniprep: 8th August)) to produce colonies containing plasmid DNA.

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
adding of 1 µl of DNA
incubation for 30 min on ice
heat shock for 5 min at 37 °C
adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133)
sedimentation of the leftover in a centrifuge (2 min, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Breeding of positive clones of colony PCR of 21rst August

Investigator: Andrea

clone 1 / 3 / 5 / 11 were stored at 4°C in 2 ml LB medium
the clone suspension were added with the pipet tip to 2 ml fresh LB medium including antibiotics (Chlp) into culture tubes
tube incubate at 37°C and 180 rpm

Preparative digest of pSB1C3_Preprothaumatin (p456) and ligation with p400 (pYes2 digested with XbaI and PstI)

Investigator: Martin, Dennis, Alois

Aim: Getting pYes2_Preprothaumatin

Preparative digest of p456:

pSB1C3_Preprothaumatin: 25 µl p456, 5 µl NEBuffer 4, 0.5 µl BSA, 1 µl XbaI, 1 µl PstI, 12.5 µl ddH2O.
37°C, 2h.

Preparative gel electrophoresis: p456 (digested with XbaI and PstI), 1 kb marker

Expected: pSB1C3_Preprothaumatin: backbone: 2.1 kb, insert 721 bp; successful.

Gel extraction, NanoDrop 2000.

Ligation:

1.7 µl p400 (digested with XbaI and PstI), 5 µl p456 (digested with XbaI and PstI), 1 µl 10x T4-DNA ligase, 1 µl T4-DNA ligase buffer, 10.3 µl ddH2O. Additional: negative control without insert.
16°C over night.

Thursday, August 23rd

Analytical gelelectrophoresis for ADH1-P (720 bp)

Undigested ADH1-P and PCR-Products of TEF2-P were loaded

Preparation of Probes for sequencing

Investigator: Georg

Aim of this work: Concentration of DNA of 50-100 ng/µl

ADH1-P (186,1 ng/µl) : 5 µl DNA + 10 µl H2O (Primer Vf2 and VR)
ADH1-T (P403) (153,5 ng/µl) : 10 µl DNA + 10 µl H20 (VF2)
TEF1T (P465): 216,5 ng/µl : 7,5 µl DNA + 12,5 µl H20 (VF2) (Ist doch TEF1-P)
P(231) (207,8ng/µl) : 5 µl DNA+ 10 µl H20
TEF2-P (P451) 390 ng/µl: 3 µl DNA + 12 µl H20
TEF2-P (P450) 116 ng/µl : 7,5 µl + 7,5 µl H20

Gelextraction

Investigator: Georg

Aim of experiment: Extraction of preparative digested TEF1-P, TEF2-P in psb1c3, and digested pYES2-TUM

Investigator: Georg

Extraction was done according to Quiaquick gel extraction kit ( with elimination of salt)

Nanodrop Measurement

Investigator: Georg

TEF1-P= 57,5 ng/µl
TEF2-P= P 91,6 ng/ µl
Pyes2-Vector: 34,4 ng /µl (salt removed)

Self-ligation (self-circularization) of pYESII-TUM

Aim of the experiment: Ligation of pYESII-TUM for transformation in E.coli XL1-blue Since no colonies were seen from the last transformation, a new reaction batch for ligase reaction was made.

Two reaction batches with 100 and 50 ng linearized Vector were made

Procedure:

Reaction batch for Ligation (100 ng):

volume	reagent
10,0 µl	T4-Ligase (1u/µl)
5,8 (=200 ng)	PYesII digested (salt removed)
10,0	10x T4-ligase buffer
10 µl	50% PEG 4000
64,1 µl	dd H20
=100µl	TOTAL

Reaction batch for Ligation (50 ng):

volume	reagent
10,0 µl	T4-Ligase (1u/µl)
2,9 (=100 ng)	PYesII digested (salt removed)
10,0	10x T4-ligase buffer
10 µl	50% PEG 4000
67,1 µl	dd H20
=100µl	TOTAL

Both batches were divided into a reaction at room temperature for 1h and 16 C over night.

Preparative digestion of ADH1-P (720 bp)in psb1c3 with SpeI and PSTI

Aim of experiment: Promoter ready for Ligation with proteine

Reaction batch for digestion:

volume	reagent
4 µl	PstI-HF (NEB)
4 µl	SpeI (NEB)
16 µl	NEB-4 buffer
1,6 µl	100 x BSA (NEB)
54,4 µl	dd H20
=80µl	TOTAL

20 µl of DNA were mixed with 20 µl of digestion batch. Digestion was performed for 3 hours at 37 C.

Preparative gel with ADH1-P (720 bp)

Investigator: Georg

40 µl of each preparative digestion was loaded onto a preparative 1% Agarose gel.
Gel war run at 70 V for 1 h

Transformation EYFP (Dist. Kit) ECFP (Distr. Kit), Lig. pYesII 1h, 50ng and 100 ng of E.coli Xl-1 blue

Investigator: Georg

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of ligation product pYESII, and 2 µl of EYFP and ECFP were added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on ampicillin plates (pYESII and ECFP)and Kanamycin plates EYFP.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new antibiotic plates.

Transformation of E.coli Xl1-blue competent cells with ligation batches at room temperature

Investigator: Georg

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of ligation product was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on ampicillin plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Miniprep of overnight culture of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437

Investigator: Jeff

Aim of the experiment: Miniprep of overnight culture of E. coli XL-Blue cells, transformated with ligation products of P436+P437 and P206+P437.

Procedure:

Miniprep of P436+P437 (6 clones picked) and P206+P437 (6 clones picked) was performed with Qiagen Qiaprep spin miniprep kit after manufacturer's protocol.

Analytical digestion and gelelectrophoresis of P468-P473

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P468-P473 (miniprep of E. coli, transformed with P436+P437 ligation product) to prove whether ligation was succesful.

Procedure:

Mastermix for analytical digestion with NgoMIV+PstI-HF:

volume	reagent
26 µl	NEBuffer 4 (10x)
3.25 µl	NgoMIV (10 U/µl)
3.25 µl	PstI-HF (20 U/µl)
195 µl	ddH2O
=227.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of samples P468-P473 in a new ERG and was mixed gently by pipetting up and down.

90 min incubation at 37 °C.

100 bp ladder DNA ladder	P468	P469	P470	P471	P472	P473	1 kbp ladder DNA ladder	PCR71
	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!		Please see subsection for analytical gelelectrophoresis for PCR71

Ligation/Fusion of P436+P437 has been successful for all clones (P468-P473). N'-PhyB(908NT)-20aaLinker-LexA-C' is ready for last fusion to the SV40 nuclear localization signal sequence.

Analytical digestion and gelelectrophoresis of P474-P479

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P474-P479 (miniprep of E. coli, transformed with P206+P438 ligation product) to prove whether ligation was succesful.

Procedure:

Mastermix for analytical digestion with NgoMIV+PstI-HF:

volume	reagent
26 µl	NEBuffer 4 (10x)
3.25 µl	NgoMIV (10 U/µl)
3.25 µl	PstI-HF (20 U/µl)
195 µl	ddH2O
=227.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of samples P474-P479 in a new ERG and was mixed gently by pipetting up and down.

90 min incubation at 37 °C.

100 bp ladder DNA ladder	P474	P475	P476	P477	P478	P479	P438	1 kbp ladder DNA ladder
	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!	Control

Ligation/Fusion of P206+P438 has been successful for all clones (P474-P479). N'-20aaLinker-Gal4DBD-C' is ready for (last?) fusion to the PhyB(908NT).

Analytical gelelectrophoresis of PCR71

Investigator: Jeff

Aim of the experiment: Analytical gelelectrophoresis of PCR71, to check whether PCR was successful.

Procedure:

Analytical gelelectrophoresis was performed at 90 V for 60 min

100 bp ladder DNA ladder	P468	P469	P470	P471	P472	P473	1 kbp ladder DNA ladder	PCR71
	Please see second last subsection	Please see second last subsection	Please see second last subsection	Please see second last subsection	Please see second last subsection	Please see second last subsection		PCR was successful!

PCR was successful to introduce RFC10 pre- and suffix, N'-SV40NLS-Gal4AD-Linker-Pif3-C' is ready for ligation to pSB1C3 as a new part in the partsregistry.

Preperative digestion and gelelectrophoresis of P475

Investigator: Jeff, Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P475 with NgoMIV+PstI-HF for further fusion to C-terminus of PhyB(908NT).

Procedure:

Reaction batch for preperative digestion of P475 with NgoMIV+PstI-HF:

volume	reagent
20 µl	Plasmid P475
4 µl	NEBuffer 4 (10x)
2 µl	NgoMIV (10 U/µl)
1 µl	PstI-HF (20 U/µl)
13 µl	ddH2O
=40 µl	TOTAL

This reaction batch has been incubated for 90 min at 37 °C.

Preperative gelelectrophoresis has been performed at 70 V for 90 min.

Insert has been cut out and extracted with Qiagen gel extraction kit.

Ligation of P436+P480

Investigator: Jeff

Aim of the experiment: Ligation of P436+P480. Final construct: N'-PhyB-20aaLinker-Gal4DBD-C'. Maybe also fusion to SV40NLS is nescessary (normally Gal4DBD itself contains a own nuclear localization signal), if nuclear import is not sufficient enough because NLS of Gal4DBD is hidden by N-terminal linker and PhyB(908NT).

Procedure:

Reaction batch for ligation of P436+P480:

volume	reagent
1.11 µl	P436
6.43 µl	P480
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
9.46 µl	ddH2O
=20 µl	TOTAL

Also negative control was prepared with the same reagents and volume but instead of the insert (P480) ddH2O was used.

Ligation was performed at 16 °C overnight.

Preparative restriction digest of PCR58 / P133 Klon20 (lavendula LS in pSB1C3, Miniprep 21rst August) and PCR2 / P133 Klon4 (citrus LS in pSB1C3, Miniprep 8th August) and P373 (pYES2)

Investigator: Lara (digest), Andrea (gel electrophoresis)

Aim: Prepare digested PCR fragments for further ligation into pYES.

volume	reagent
10 µl	PCR2 / P133 clone 4 (8.8.)
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
23.6 µl	ddH2O
=40 µl	TOTAL

volume	reagent
17 µl	PCR58 / P133 (clone 20)
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
16.6 µl	ddH2O
=40 µl	TOTAL

volume	reagent
20 µl	P375
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
2 µl	XbaI (20 U/µl)
4 µl	NgoMIV (10 U/µl)
9.6 µl	ddH2O
=40 µl	TOTAL

Incubation at 37°C for 3 h.

expected:

Limonensynthase: 1600 bp

pYES2: 5800 bp

ligation of PCR2/P133 (Miniprep 08.08.) and PCR58/133 (Miniprep 21.08.) in pYES2 (P375)

Investigator: Andrea

concentrations after gel extraction:

PCR2: 15.0 ng/µl

PCR58: 9.1 ng/µl

pYES2 (P375): 17.1 ng/µl

stored in 50ml Falcon (label "Ligierung 23.08. Andrea")

PCR2 in P375 digested with XbaI and AgeI/NgoMIV

volume	reagent
2.78µl	P375
5.22 µl	PCR 2
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

PCR58 in P375 digested with XbaI and AgeI/NgoMIV

volume	reagent
1.95 µl	P375
6.05 µl	PCR58
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

Negative control

volume	reagent
2 µl	P375
6 µl	ddH2O
1 µl	T4 DNA Ligase
1 µl	T4-ligase buffer (10x)

ligation ration 1:6

Picking of colonies of transformation (August 22nd)

Investigator: Andrea

Aim: Get cells for miniprep for amplifying ligation products.

Procedure:

Picking of 5 clones each of PCR2/p133 clone 20 (Miniprep 21.08.) and PCR58/P133 clone 4 (mini prep 08.08.)
Inbucation at 37°C (shaker) over night.

Miniprep of colony PCR clones of 21th August

Investigator: Andrea

Aim: Get plasmid DNA of the plasmids that were identified as insert-positive clones.

Clones 1, 3, 5, 11 of colony PCR (21.08.) were miniprepped.

Clone 1: 71.3 ng/µl
Clone 3: 55.6 ng/µl
Clone 5: 122.1 ng/µl
Clone 11: 118.2 ng/µl

Plasmid DNA is stored in a 50 ml Falcon tube at the lowest drawer of -20°C. (label: Miniprep 23.8. Andrea)

Analytical restriction digest and gel electrophoresis of miniprep of colony PCR products (miniprep 23.08.)

Investigators: Andrea

volume	reagent
3 µl	plasmid DNA
0.5 µl	Xba 1
0.5 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
12.2 µl	ddH2O

Gelelectrophoresis:

expected:

Limonensynthase 1600 bp

pSB1C3 (P133) 2000 bp

positive ligations:

clone 11 = PCR56/p133

only 10 µl were used for gel electrophoresis (rest is stored in the same tube with appendant miniprep products)

Transformation of pYes2_Preprothaumatin and inoculation

Investigator: Martin, Alois

Aim: Getting pYes2_Preprothaumatin

Small Scale Yeast Transformation

Investigator: Martin, Alois

Aim: Preculture of S. cerevisiae according to pYes2_manuel_kommentiert

1. Inoculate 4 ml of YPD medium with a colony of S. cerevisiae and shake overnight at 30°C.

Colony PCR

Investigator: Lara

Aim: Forward primer of vector backbone and the reverse primer of the insert were used.

extension time of PCR reaction was adjusted to the longer PCR product (insert+primers+backbone from primer binding site)
annealing temperature was adjusted to lowest primer melting temperature

Citrus: 8 clones of PCR43/p175 (transformation of 17.8.) were picked.
Lavendula: 8 clones of PCR57/p133 (trafo 17.8.), 8 clones PCR57/p175 (transformation of August 17th) and 8 clones of PCR56/p175 (trafo 17.8.) were picked.
positive control: plasmid DNA of PCR1/p175 (clone 20) as positive control
negative controls: ddH2O

Citrus in pYES (PCR43/p175)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O8
0.5 µl	10 µM O30
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Lavendula in pSB1C3 (PCR57/p133)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O68
0.5 µl	10 µM O37
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Lavendula in pYES (PCR56/p175 and PCR57/p175)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O8
0.5 µl	10 µM O37
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

PCR program:

Initial denaturation	94 °C	10 min
30 cycles	94 °C	30 s
	50 °C	30 s
	68 °C	2 min
Final extension	68 °C	5 min
Hold	4 °C

Labels:

1-7: PCR43/p175

8: Pos. control: PCR1/p175 (20)

9-16: PCR57/p133

17-24: PCR57/p175

25-32: PCR56/p175

33: Negative control: ddH2O

Gelelectrophoresis still needs to be done

Preparation of aliquots for SC Minimal Medium

Investigator: Saskia, Roman

Preparation of ten 50 ml aliquots of SC Minimal Medium (URA-) as described in the commented pYES manual on page 10. To solve the substances you need to mix and heat it. For 1 l SC Minimal Medium: 50 ml Aliquot + 6.7 g Yeast Nitrogen Base + 850 ml water. Autoclave seperately 20 g glucose or galactose in 100 ml water.

Preparation of 200 ml flasks with SC Minimal Medium (URA-)

Investigator: Saskia, Volker

Preparation of 200 ml flasks with SC Minimal Medium (URA-) and galactose for expression.

Preparation of Selective SC Minimal Medium Plates

Investigator: Saskia

Preparation of selective SC Minimal Medium Plates without Uracil and without Uracil and Leucin as described in the pYES manual on page 10. 3 % Agar were used instead of 2 % (the last time the agar didn't jell with 2 % Agar).

Western Blot of APT at different times of expression in yeast - continued

Investigator: Daniela

Aim of the experiment: Find out optimum time for expression.

Detection:

via Streptavidin-AP (1:4000) ->10ml, Streptavidin-AP diluted in PBST0.1+3%BSA
1h incubation, be sure that the whole membrane is covered with Streptavidin-AP solution.

Developing:

15 ml AP-buffer mixed with 45 µl BCIP (50 mg/ml in DMF) and 7.5 µl NBT (75 mg/ml in 70 % DMF)
incubation: about 30 min

Expected bands:

APT: length: 411, mass = 45.481 kDa

GFP: mass: 26.9 kDa ->positive control

Sequencing of plasmids pSB1C3_Insert and pYES2_RFC25_Insert

Investigator: Roman, Saskia

Aim: Proof of inserted sequence

Sequenced plasmids:

pSB1C3_CaXMT1 (clone B1B): sequence ok
pSB1C3_CaMXMT1 (clone B2A): sequence ok
pSB1C3_CaDXMT1 (clone B3D): sequence ok

pYES2_RFC25_CaXMT1 (clone Y1B): sequencing failed
pYES2_RFC25_CaMXMT1 (clone Y2D): sequencing failed
pYES2_RFC25_CaDXMT1 (clone Y3A): sequencing failed

Note: Sequencing of pYES2- plasmids will be repeated next week with newly picked clones. Sequencing results of all three pSB1C3 plasmids (containing inserts) were positive.

Friday, August 24th

Preparative gelelectrophoresis of digested ADH1-P (720 bp)

Digestion with PstI-HF and Spe-HF was succesful

Analytical digestion of P465 and P 309

Investigator: Georg

Aim of experiment: Since the sequence in P465 was from TEF1-P instead of TEF1-T you have to verify the insert

Procedure

Reaction batch for digestion:

volume	reagent
0,75 µl	PstI-HF (NEB)
0,75 µl	XbaI (NEB)
6 µl	NEB-4 buffer
0,6 µl	100 x BSA (NEB)
44,4 µl	dd H20
=60µl	TOTAL

Analytical gel showed that everywhere was TEF1-P

Gelextraction of ADH1-P (720 bp) P299,P300 (TEF1-P), P432 and P433 (TEF1-P +psb1c3), P434 and P435 (ADP-P lang + psb1c3)

Investigator:Georg

Gelextraction was performed according to Quiaquick gel extraction protocol (salt removed)

Nanodrop

Investigator:Georg

ADH1-P (720 bp)= 22,1 ng/µl
P434 = 64,1 ng/ml
P299 = 12,6 ng/µl
P432 = 49,8 ng/µl

Picking of colonies of pYESII-Tum, GFP and ADH1-P (720 bp)

Investigator: Georg

10 colonies from pYES2-TUM transformation with 50 ng/µl (1h), 4 Colonies GFP and 2 Colonies from ADH1-P were Picked
Colonies from pYES2 and GFP were transferred to 5 ml LB-Medium with 1x Ampicillin, ADH1-P colonies were transferred to LB-Medium with 1x Chloramphenicol

Preperative digestion and gelelectrophoresis of P470 and PCR71

Investigator: Jeff, Dennis

Aim of the experiment:

Procedure:

Reaction batch for preperative digestion of P470 with NgoMIV+PstI-HF:

volume	reagent
20 µl	Plasmid P470
4 µl	NEBuffer 4 (10x)
2 µl	NgoMIV (10 U/µl)
1 µl	PstI-HF (20 U/µl)
13 µl	ddH2O
=40 µl	TOTAL

Reaction batch for preperative digestion of PCR71 with XbaI+PstI-HF:

volume	reagent
25 µl	PCR71
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
17.5 µl	ddH2O
=50 µl	TOTAL

These reaction batches were incubated for 2.5 h at 37 °C.

4.44 µl of DNA loading buffer (10x) was added to the digestion of PCR71 and 5.55 µl of DNA loading buffer (10x) was added to the digestion of P470.

Preperative gelelectrophoresis was performed at 70 V for 90 min.

100 bp DNA ladder	P470 (NgoMIV+PstI-HF)	PCR71 (XbaI+PstI-HF)	1 kbp DNA ladder
	Digested Insert (upper band!) was cut out	Digested PCR product was cut out

Insert very difficult to cut out because insert and backbone are near and has a very broad width.

Analytical gelelectrophoresis should be performed to verify the insert length and the purity of the insert by checking if there is a pSB1C3 contamination at about 2.1 kbp.

Transformation of E. coli XL1-Blue with ligation product P436+P480

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation product P436+P480 for the (pre-)finale contruction of N'-PhyB(908NT)-20aaLinker-Gal4DBD-C'.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of the ligation product (P436+480) and it's negative control (P436 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on new chloramphenicol plates.

Incubation at 37 °C overnight.

Analytical gelelectrophoresis of P491, PCR53, PCR62, P492, P493

Investigator: Jeff

Aim of the experiment: Analytical gelelectrophoresis was done for P491 because the length of the part was not exactly determinable in the preperative gelelectrophoresis because the width of the DNA band was very strong. PCR53, PCR62, P492, P493 was performed for Georg because there was place for other samples.

Procedure:

5 µl of the samples were mixed with 1 µl of DNA loading buffer (10x).

Analytical gelelectrophoresis was performed at 90 V for 1.5 h.

100 bp DNA ladder	P491	PCR53	PCR62	P492	P493	1 kbp DNA ladder
	Length is okay, but contaminated with small amount of pSB1C3 backbone	Please see subsection for constitutive promoters	Please see subsection for constitutive promoters	Please see subsection for constitutive promoters	Please see subsection for constitutive promoters

Cycled ligation of P399+P491 and P439+PCR72

Investigator: Jeff

Aim of the experiment: Etablishing a new method for ligation to combine high ligase activity and optimal annealing temperature of the sticky ends. Cycled ligation was performed for P399+P491 and P439+PCR72 and their negative controls P399 NK and P439 NK

Procedure:

Ligation batch for P399+P491

volume	reagent
1.97 µl	P399
7.08 µl	P491
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
7.95 µl	ddH2O
=20 µl	TOTAL

Ligation batch for P499+P491

volume	reagent
2.24 µl	P439
5.19 µl	PCR72
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
9.57 µl	ddH2O
=20 µl	TOTAL

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Minipreparation of pSB1C3_Preprothaumatin and pYes2_Preprothaumatin

Investigator: Martin, Alois

pYes2_Preprothaumatin: p481-p484

pSB1C3_Preprothaumatin: p485-490.

Control digest of pYes2_Preprothaumatin

Investigator: Martin, Alois

Aim: Is the insert (preprothaumatin) integrated into pYes2?

Analytical digest:

12 µl (p481-p485), 2 µl NEBuffer 4, 0.2 µl BSA, 0.25 µl XbaI, 0.25 µl SpeI, 5.3 µl ddH2O; 37°C, 1h.

Analytical gel electrophoresis: 1 kb marker, p481, p482, p483. p484, p485

Expected: backbone: 5.8 kbp, insert: 721 bp.

Result: All clones are positive, preprothaumtain is integrated in pYes2.

Small scale yeast transformation of S. cerevisiae with pYes2_Preprothaumatin

Investigator: Martin, Alois

Procedure according to pYes2_manual_kommentiert:

2. Determine the OD600 of your overnight culture. Dilute culture to an OD600 of 0.4 in 50 ml of YPD medium, add 5ml 20% glucose and grow an additional 2–4 hours. 3. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 40 ml 1X TE. 4. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 2 ml of 1X LiAc/0.5X TE. 5. Incubate the cells at room temperature for 10 minutes. 6. For each transformation, mix together 1 μg plasmid DNA and 100 μg (10 μl) denatured sheared salmon sperm DNA with 100 μl of the yeast suspension from Step 5. 7. Add 700 μl of 1X LiAc/40% PEG-3350/1X TE (7 ml 50% PEG3350 was synthesized (3.5 g in 7 ml bidest.water); 6.4 ml 50% PEG3350 + 800 μl 10x LiAc + 800 μl 10x TE were mixed) and mix well. 8. Incubate solution at 30°C for 30 minutes. 9. Add 88 μl DMSO, mix well, and heat shock at 42°C for 7 minutes. 10. Centrifuge in a microcentrifuge for 10 seconds and remove supernatant. 11. Resuspend the cell pellet in 1 ml 1X TE and re-pellet. 12. Resuspend the cell pellet in 50–100 μl 1X TE and plate on a selective plate (SCU-plates + Glucose). Incubate the SCU-plates at 30°C over the weekend.

Name: pYes2_Preprothaumatin, S. cerevisiae, Schappert, Bräuer.

Results: Didn't work. Have to redo it.

Miniprep of positive clones

Investigator: Lara

Aim: Get more plasmid DNA of the positive clones.

PCR58/p133 (tube 1): 440 ng/µl
PCR58/p133 (tube 2): 224 ng/µl
PCR58/p133 (tube 3): 356 ng/µl
PCR2/p133 (tube 1): 224 ng/µl
PCR2/p133 (tube 2): 282 ng/µl
PCR2/p133 (tube 3): 227 ng/µl

Eppis are stored in a disposal bag (label: Positive Klone, Lara, 24.8.) in the lowest drawer of -20°C.

Analytical restriction digest of transformed positive clones

Investigator: Lara

Aim: Check that transformed clones are OK.

volume	reagent
2.5 µl	plasmid DNA
0.25 µl	Xba 1
0.25 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
14.8 µl	ddH2O

Gelelectrophoresis:

Gel:

1. Gene Ruler 1kb

2. PCR58/p133 (1)

3. PCR58/p133 (2)

4. PCR58/p133 (3)

5. PCR2/p133 (1)

6. PCR2/p133 (2)

7. PCR2/p133 (3)

expected:

Limonene synthase 1600 bp

pSB1C3 (P133) 2000 bp

Transformation with insert-positive plasmids and ligation products (ligation 23.8.)

Investigator: Lara

Aim: Transform E.coli XL 1 blue with plasmids that were identified as being positive for insert. Furthermore transformation with ligation products of ligation 23.8.

Transformations:

1. PCR1/pYES clone 2 (no. 29, disposal bag, middle drawer of -20°C)

2. PCR56/p133 (miniprep 23.8., clone 11, Falcon, lowest drawer of -20°C)

3. Ligation product PCR2/pYES (ligation 23.8.)

4. Ligation product PCR58/pYES (ligation 23.8.)

5. Ligation product negative control (ligation 23.8.)

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
adding of 1 µl of DNA (positive plasmids) or of 5 µl of ligation products
incubation for 30 min on ice
heat shock for 5 min at 37 °C
adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133), Ampicillin-plate (pYES)
sedimentation of the leftover in a centrifuge (2 min, 13 000 rpm), resuspension of the sediment in 100 µl LB-medium and plating it as well on an antibiotic containing LB-plate

Quick Change mutagenesis to remove EcoRI(at 150 bp) in the 4CL

Investigator: Saskia, Daniela

Aim of the experiment: Generation of an RFC 25 compatible version of the 4CL gene.

Samples:

4CL- in pYES clone 2
4CL+ in pYES clone 2
4CL- in pSB1C3 clone 1
4CL+ in pSB1C3 clone 2

PCR
Reaction batch 1

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	DNA
0.5 µl	1:10 dilution of O77 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

Reaction batch 2

volume	reagent
2.5 µl	10x Pfu Ultra II buffer
4 µl	DNA
0.5 µl	1:10 dilution of O78 (10 pmol/µL)
16.5 µl	ddH2O
0.5 µl	dNTP mix
0.5 µl	Pfu Ultra II DNA polymerase (2.5 U / µl)

PCR cycling parameters

Segment	Cycles	Temperature	Time
1	1	95 °C	30 sec
2	10	95°C	30 sec
		55°C	1 min
		67°C	6 min

Having completed the PCR cycling parameters listed above both PCR reaction batches were mixed together and the cycling parameters listed above were one time more applied.
Digestion of the parental DNA with DpnI: Addition of 1 µl DpnI to the PCR batch and incubate for 1 h at 37 °C.

Transformation into E.coli Xl1-Blue Operation Sequence

melting of 100 µl Ca-competent E.coli XL1-Blue cells on ice
addition of 1 µl of the PCR product
incubation for 30 min on ice
heat shock for 5 min at 37 °C
addition of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 30 min
plate 100 µl on an Amp-LB-plate (pYES) or an Chlp-LB-plate (pSB1C3)
sediment the leftover in a centrifuge (30 - 60 sec, 13 000 rpm) and resuspend the sediment in 100 µl LB-medium and plate it as well on an Amp-LB-plate (pYES) or an Chlp-LB-plate (pSB1C3)

Saturday, August 25th

Transformation of E. coli XL1-Blue with ligation product P399+491 and P439+PCR72

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P399+491 and P439+PCR72 for the constructs of N'-SV40NLS-PhyB(908NT)-20aaLinker-LexA-C' and N'-SV40-Gal4AD-Linker-Pif3-C'.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of the ligation products (P399+491 and P439+PCR72) and it's negative control (P499 NK and P439 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.

Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with ligation products of P436+480

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation product of P436+480 (P495).

Procedure:

6 colonies of P436+480 (P495) (CamR) transformated cells were picked.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Miniprep

Investigator: Jeff

Aim of the experiment: Miniprep of ???

Procedure:

Miniprep was performed after manufacturer's protocol (QIAGEN - QIAprep Spin Miniprep Kit).

Picking of E.coli XL1-Blue transformed with 4CL after Quick Change from August 24th

Investigator: Daniela

Aim of the experiment: Picking of E.coli XL1-Blue transformed with 4CL after Quick Change from August 24th.

Procedure:

4 colonies were taken of each transformation.

4CL- in pYES clone 2
4CL+ in pYES clone 2
4CL- in pSB1C3 clone 1
4CL+ in pSB1C3 clone 2

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4-5 ml of LB-medium and antibiotics (Amp -> pYES, Chlp -> pSB1C3. These tubes were put overnight in a 180rpm cell culture shaker at 37°C.

Sunday, August 26th

Miniprep of E. coli XL-Blue cells, transformated with ligation products of P436+480

Investigator: Jeff

Aim of the experiment:

Procedure:

Miniprep was performed after manufacturer's protocol (QIAGEN - QIAprep Spin Miniprep Kit). Tubes were labeled with P501-P506.

Analytical digestion and gelelectrophoresis of P501-P506

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P501-P506 with NgoMIV+PstI-HF.

Procedure:

Mastermix for analytical digestion with NgoMIV+PstI-HF:

volume	reagent
14 µl	NEBuffer 4 (10x)
1.75 µl	NgoMIV (10 U/µl)
1.75 µl	PstI-HF (20 U/µl)
105 µl	ddH2O
=122.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of samples P501-P506 in a new ERG and was mixed gently by pipetting up and down.

90 min incubation at 37 °C.

9 µl of the samples were mixed with 1 µl of DNA loading buffer (10x).

Analytical gelelectrophoresis was performed at 90 V for 1.5 h.

All picked clones are positive! Finished construct: N'-Phyb(908NT)-20aaLinker-Gal4DBD-C'. Possible last fusion to SV40NLS, if N-terminal NLS of Gal4DBD is strongly concealed by N-terminal fusion by PhyB-20aaLinker.

Picking of E. coli XL-Blue cells, transformated with ligation products of P399+491 and P439+PCR72

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P399+491 and P439+PCR72.

Procedure:

6 colonies of the transformation with P399+491 (CamR) and 10 colonies of the transformation with P439+PCR72 (CamR) were taken.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Miniprep of Y1B, Y2D and Y3A

Investigator: Saskia

Aim:

Preparation of pYESnew Y1B, Y2D and Y3A for sequencing.

Plasmidconcentration: Nanodroplet

pYES2new_caffeine_involved_gene	Concentration in ng/µl
Y1B	66.4
Y2D	47.6
Y3A	49.7

Picking of colonies

Investigator: Saskia

Procedure:

Picking of 5 clones each of PCR2 pYES and PCR58 pYES and picking of 2 clone each of PCR1 pYES and PCR56 pSBC3
Inbucation at 37°C (shaker) over night.

Analytical restriction digest and analytical gel electrophoresis

Investigator: Saskia and Katrin

Aim of the experiment: Controll of success of the Quickchange mutagenesis from 24.08.2012 to remove EcoRI from 4Cl

Analytical digest: of Cl- pYES, Cl+ PYES, Cl- pSB1C3 and Cl+ pSB1C3

Procedure:

Digestion reaction batch

volume	reagent
2.5 µl	Plasmid-DNA
0.25 µl	EcoRI HF
0.25 µl	SpeI HF
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
14.8 µl	ddH2O
=20 µl	TOTAL

Digestion over night at 37 °C.

Analytical DNA-gelelectrophoresis:

Procedure: Analytical gelelectrophoresis was performed at 90 V for 1 h.

Gel 1:

1 kp ladder DNA ladder

Cl+ pYES1

Cl- pSB1C3

Cl+ pYES3

Cl+ pYES4

Cl- pYES1

Cl- pYES2

Cl- pYES3

Cl- pYES4

100 bp ladder DNA ladder

Gel 2:

1 kp ladder DNA ladder

Cl+ pSB1C31

Cl+ pSB1C3

Cl+ pSB1C33

Cl+ pSB1C34

Cl- pSB1C31

Cl+ pYES

Cl- pSB1C33

Cl- pSB1C34

100 bp ladder DNA ladder

Week 12

Monday, August 27th

Miniprep of E. coli XL-Blue cells, transformated with ligation products of P399+P491 and P439+PCR72

Investigator: Jeff, Dennis

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products of P399+P491 and P439+PCR72.

Procedure:

Miniprep was done after manufacturer's protocol. (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of the minipreps P524-P539

Investigator: Jeff, Dennis

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps P524-P539 with NgoMIV+PstI-HF.

Procedure:

Mastermix for analytical digestion for P507-P522 with NgoMIV+PstI-HF:

volume	reagent
34 µl	NEBuffer 4 (10x)
4.25 µl	NgoMIV (10 U/µl)
4.25 µl	PstI-HF (20 U/µl)
255 µl	ddH2O
=297.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P507-P522).

The reaction mixes were incubated at 37 °C for 90 min.

9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).

Analytical gelelectrophoresis was performed at 90 V for about 60 min.

P524-P533:

100 bp DNA ladder	P524	P525	P526	P527	P528	P529	P530	P531	P532	P533	1 kbp DNA ladder
	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed	Ligation failed

P534-P539:

100 bp DNA ladder	P533	P534	P535	P536	P537	P538	P539	1 kbp DNA ladder
	Ligation maybe succesful, SEQUENCING has to be done!!	Ligation maybe succesful, SEQUENCING has to be done!!	Ligation maybe succesful, SEQUENCING has to be done!!	Ligation maybe succesful, SEQUENCING has to be done!!	Ligation maybe succesful, SEQUENCING has to be done!!	Ligation maybe succesful, SEQUENCING has to be done!!	Ligation maybe succesful, SEQUENCING has to be done!!

Preperative digestion and gelelectrophoresis of P506

Investigator: Jeff, Dennis

Aim of the experiment: Preperative digestion and gelelectrophoresis of P506 with NgoMIV+PstI-HF.

Procedure:

Reaction batch for P506 with NgoMIV+PstI-HF:

volume	reagent
20 µl	P506
4 µl	NEBuffer 4 (10x)
2 µl	NgoMIV (10 U/µl)
1 µl	PstI-HF (20 U/µl)
13 µl	ddH2O
=40 µl	TOTAL

Preperative digestion was carried out at 37 °C for 2 h.

Preperative gelelectrophoresis was performed at 70 V for 2 h.

Upper band (Insert) was cut out and DNA was extracted with gel extraction kit from Qiagen after manufacturer's protocol.

Small Scale Yeast Transformation - Preparatory culture

Investigator: Martin, Alois

Aim: Preculture of S. cerevisiae according to pYes2_manuel_kommentiert.

1. Inoculate 4 ml of YPD medium with a colony of S. cerevisiae and shake well overnight at 30 °C.

Results: 30 °C and not 37 °C. Redo!

Miniprep of positive clones

Investigator: Lara

Aim: Get more plasmid DNA of the positive clones (PCR1/pYES & PCR56/p133). Check ligation products (PCR58/pYES, PCR2/pYES). Check colony PCR clones.

PCR58/pYES (tube 1): ng/µl
PCR58/pYES (tube 2): 83 ng/µl
PCR58/pYES (tube 3): 92 ng/µl
PCR58/pYES (tube 4): 136 ng/µl
PCR58/pYES (tube 5): 110 ng/µl

PCR2/pYES (tube 1): 212 ng/µl
PCR2/pYES (tube 2): 170 ng/µl
PCR2/pYES (tube 3): 173 ng/µl
PCR2/pYES (tube 4): 162 ng/µl
PCR2/pYES (tube 5): 132 ng/µl

PCR1/pYES (tube 1): 112 ng/µl
PCR1/pYES (tube 2): 104 ng/µl

PCR56/p133 (tube 1): 207 ng/µl
PCR56/p133 (tube 2): 80 ng/µl

ColPCR Clone2: 121 ng/µl
ColPCR Clone9: 82 ng/µl
ColPCR Clone16: 81 ng/µl
ColPCR Clone26: 96 ng/µl
ColPCR Clone28: 280 ng/µl
ColPCR Clone32: 146 ng/µl

Eppis are stored in a disposal bag (label: Positive Klone, Lara, 27.8.) in the lowest drawer of -20°C.

Analytical restriction digest

Investigator: Lara (digest), Andrea (gel)

Aim: Check clones for insert.

volume	reagent
3 µl	plasmid DNA
0.25 µl	Xba 1
0.25 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
14.3 µl	ddH2O

Gelelectrophoresis:

Gel:

expected:

Limonene synthase 1600 bp

pYES2 5800 bp

pSB1C3 (P133) 2000 bp

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Picking transformed Saccharomyces cerevisiae cells for protein expression in yeast

Inoculation of overnight cultures: one clone from plate with PCR 1 in P175 clone 2 (Miniprep 21.08.) (29) was picked,resuspended in 15 ml SCU medium with glucose and incubated at 30 °C overnight

Picking of colonies for miniprep

Investigator: Saskia

Aim: New miniprep for new transformation of S. cerevisiae with Y1, Y2 and Y3 and new sequencing (the last one wasn't successful)

Picking of 3 clones each of Y1, Y2 and Y3. There are named Y1E, Y1F, Y1G and Y2E, Y2F, Y2G and Y3E, Y3F, Y3G
Inbucation at 37°C (shaker) over night.

Picking of colonies for yeast transformation

Investigator: Saskia

Aim: yeast transformation for expression of caffeine-genes

Procedure:

Picking of 1 clone of S. cerevisiae INVScN1 in 4 ml YPD
Inbucation at 30°C (shaker) over night.

Tuesday, August 28th

Analytical gelelectrophoresis of pYES2-TUM undigested

Investigator: Georg

Plasmid-DNA of undigested pYES-TUM colonies was applicated on analytical 0,5% Agarosegels
pYES2 served as control plasmid
colonies 1-4 and 6-10 showed positive pYES-TUM2 variants

Analytical digestion of pYES2-TUM

Investigator: Georg

Reaction batch for digestion:

volume	reagent
2,75 µl	PstI-HF (NEB)
22 µl	NEB-4 buffer
167,75 µl	dd H20
=192,5µl	TOTAL

to 2,5 ml of DNA 17,5 µl reaction batch were added
Digestion took place at 37°C for 1 h

Analytical gelelectrophoresis of pYES2-TUM

Investigator:

Digested pYES2-Tum clones were analyzed on 0,5% Agarose gels
Clones 1-4 and 6-10 were positive

Nanodrop

Investigator: Georg

ADH-P Kol1: 112,5 ng/µl
ADH-P Kol2: 105,4 ng/µl
pYES2-TUM Kol1: 155,7 ng/µl
pYES2-TUM Kol2: 67,3 ng/µl
pYES2-TUM Kol3: 124,5 ng/µl
pYES2-TUM Kol4: 91,5 ng/µl
pYES2-TUM Kol5: 91,7 ng/µl
pYES2-TUM Kol6: 122,8 ng/µl
pYES2-TUM Kol7: 105,9 ng/µl
pYES2-TUM Kol8: 123,9 ng/µl
pYES2-TUM Kol9: 129,8 ng/µl
pYES2-TUM Kol10:136,9 ng/µl
GFP Kol1: 152,1 ng/µl
GFP Kol2: 107,5 ng/µl
GFP Kol3: 53,9 ng/µl
GFP Kol4: 146,9 ng/µl

Cycled ligation of P399+P552

Investigator: Dennis, Jeff

Aim of the experiment: Cycled ligation was performed for P399+P552 and it's negative control P399 NK.

Procedure:

Ligation batch for P399+P552

volume	reagent
1.97 µl	P399
12 µl	P491
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
3.03 µl	ddH2O
=20 µl	TOTAL

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Ligation of PCR57 in pYES and pSB1C3, of PCR 42 in pSB1C3, of PCR 56 in pYES

Investigator: Andrea

Aim: Get successful ligated clones of PCR57 in pYES and pSB1C3, of PCR 42 in pSB1C3, of PCR 56 in pYES

Procedure

PCR 42 in pSB1C3 (P133)

Substance	Volume
P133	6.7 µl (~50 ng vector dna)
PCR 42	6.3 µl (~3x of n(vector))
T4 ligase	1
T4 ligase buffer	1 µl
TOTAL	=15 µl

PCR 56 in pYES (P375 verdaut)

Substance	Volume
P375 verdaut	9.3 µl (~50 ng vector dna)
PCR 56	3.7 µl (~3x of n(vector))
T4 ligase	1
T4 ligase buffer	1 µl
TOTAL	=15 µl

PCR 57 in pYES (P375 verdaut)

Substance	Volume
P375 verdaut	9.2 µl (~50 ng vector dna)
PCR 57	3.8 µl (~3x of n(vector))
T4 ligase	1
T4 ligase buffer	1 µl
TOTAL	=15 µl

PCR 57 in pSB1C3 (P133)

Substance	Volume
P133	1.6 µl (~50 ng vector dna)
PCR 57	11.45 µl (~3x of n(vector))
T4 ligase	1
T4 ligase buffer	1 µl
TOTAL	=15 µl

incubation at RT for 1 hour
afterwards transformation
rest of ligation incubated over night at 16 °C

Transformation into E.coli (ligation 28.8.)

Investigator: Andrea

Aim: Transform E.coli XL 1 blue with ligation products of ligation 28.8.

Transformations:

1. PCR57 (digested 7th August) in pYES (P375, digested 23th August)

2. PCR57 (digested 7th August) in pSB1C3 (P133)

3. PCR 42 (digested 7th August) in pSB1C3 (P133)

4. PCR 56 (digested 7th August) in pYES (P375, digested 23th August)

Transformation into E.coli Xl1-Blue

thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
adding of 1 µl of DNA (positive plasmids) or of 5 µl of ligation products
incubation for 30 min on ice
heat shock for 5 min at 37 °C
adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133), Ampicillin-plate (pYES, P375)

Colony PCR

Investigator: Lara

Aim: Forward primer of vector backbone and the reverse primer of the insert were used.

extension time of PCR reaction was adjusted to the longer PCR product (insert+primers+backbone from primer binding site)
annealing temperature was adjusted to lowest primer melting temperature

Citrus: 8 clones of PCR42/p133 (4 clones transformation of 8.8., 4 clones of 27.7.) were picked.
Lavendula: 8 clones of PCR57/p133 (trafo 8.8.), 8 clones PCR57/p175 (transformation of August 17th) and 8 clones of PCR56/p175 (trafo 8.8.) were picked.
positive control: clones PCR2/p133, PCR58/p133, PCR58/pYES
negative controls: ddH2O

Citrus in pYES (PCR43/p133)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O68
0.5 µl	10 µM O30
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Lavendula in pSB1C3 (PCR57/p133)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O68
0.5 µl	10 µM O37
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

Lavendula in pYES (PCR56/p175 and PCR57/p175)

volume	reagent
5 µl	5x OneTaq Standard Reaction Buffer
0.5 µl	10 mM dNTPs
0.5 µl	10 µM O8
0.5 µl	10 µM O37
0.13 µl	OneTaq Hot Start DNA Polymerase
18.37 µl	dd water
25 µL	TOTAL

PCR program:

Initial denaturation	95 °C	10 min
30 cycles	95 °C	30 s
	50 °C	30 s
	68 °C	2 min
Final extension	68 °C	5 min
Hold	4 °C

Labels:

1-8: PCR42/pSB1C3 (1-4: 8.8.; 5-8: 27.7.)

9-16: PCR57/pSB1C3

17-24: PCR57/p175

25-32: PCR56/p175

33: Negative control: ddH2O 34: PCR2/p133 35: PCR58/p133 36: PCR58/pYES

Gelelectrophoresis still needs to be done

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Transfer of a certain amount of transformed Saccharomyces cerevisiae cells from yesterday to new medium for protein expression in yeast

Resuspended Saccharomyces cerevisiae cells in 15 ml SCU medium with glucose growed successful
Measurement: OD600 = 1.8 (used OD600 = 0.4)
10 ml of resuspended S. cerevisiae were added to 40 ml SCU medium with glucose for reaching OD600 = 0.4
Incubation at 30 °C overnight

Plasmid isolation of pYES2_RFC25_Insert containing over night cultures

Investigator: Roman

Aim of the experiment: Isolation of plasmids pYES2_RFC25_CaXMT1, pYES2_RFC25_CaMXMT1 and pYES2_RFC25_CaDXMT1 to be able to repeat yeast transformation

Operational sequence: Plasmid isolation was performed with the Quiagen Miniprep Kit as described in the manufacturers protocoll. Three over night cultures of each plasmid had been prepared on the day before. They had been established of three colonies of each plate, named Y1E-G, Y2E-G and Y3E-G. Elution was made with 40µl elution buffer, heated up to 37°C and 1 minute incubation before the final centrifugation step.

Concentrations: Concentration was measured with NanoDrop:

Y1E: 230,7 ng/µl
Y1F: 164,5 ng/µl
Y1G: 290,6 ng/µl

Y2E: 181,2 ng/µl
Y2F: 91,8 ng/µl
Y2G: 191,0 ng/µl

Y3E: 98,9 ng/µl
Y3F: 181,5 ng/µl
Y3G: 157,1 ng/µl

Control digest of isolated pYES2_Insert plasmids with Xba1 and Pst1-HF

Investigator: Roman

Aim of the experiment: Test of isolated plasmids, wether they are containing the right inserts (CaXMT1, CaMXMT1 and CaDXMT1).

Operational sequence:

Reaction batch:

reagent	volume
Plasmid template	5µl
Buffer NEB 4	2µl
BSA 100x	0,2µl
RE Xba1	0,25µl
RE Pst1-HF	0,25µl
ddH2O	12,3
TOTAL	20µl

The reaction batch was incubated at 37°C for about 1,5 h, beeing followed by an analytical gel electrophoresis.

Analytical gelelectrophoresis of digested plasmids

Investigator: Roman

Aim of the experiment: Proof of the expected inserts

Operational sequence: The whole amount of the reaction batch (restriction digest, 20µl, see above) was load on gel after having mixed the samples with 2 µl of 10x loading dye.

Expected lengths of the inserts: ca. 1200bp (all three genes have almost the same length).

From left to right:

DNA Ladder

Y1E Xba1/Pst1

Y1F Xba1/Pst1

Y1G Xba1/Pst1

Y2E Xba1/Pst1

Y2F Xba1/Pst1

Y2G Xba1/Pst1

Y3E Xba1/Pst1

Y3F Xba1/Pst1

Y3G Xba1/Pst1

DNA Ladder

Result: All the newly picked colonies show the right, expected insert. Clones Y1G, Y2G and Y3G will be used for the repetition of the yeast transformation.

Repetition of yeast transformation

Investigator: Roman

Aim of the experiment: Transformation of yeast cells (INVSCN1) with the plasmids pYES2_RFC25_CaXMT1, pYES2_RFC25_CaMXMT1 and pYES2_RFC25_CaDXMT1, as well as pYES2_RFC25_eGFP (positive controll).

Operational sequence:

The yeast transformation was performed as described in the pYES2 manual of Invitrogen (see small scale yeast transformation), using an over night culture of INVSC1- yeast cells. The solutions 1xTE and 1xLiAc/40% PEG 3350/1xTE were made immediately before use.

1xTE:

5µl of 10x TE were mixed with 45µl ddH2O and sterile filtrated.

1xLiAc/40% PEG 3350/1xTE

At first, 3,5g PEG 3350 were dissolved in 7ml of bidestillated water, resulting in a 50% PEG solution. 6,4ml of this 50% PEG solution were mixed with 800µl 10xTE and 800µl 10x LiAc and sterile filtrated.

Used amount of vector DNA:

Y1G (p554): 4µl (ca. 1,1µg)
Y2G (p555): 6µl (ca. 1,1µg)
Y3G (p556): 6,5µl (ca. 1µg)
eGFP: 5 µl (ca. 1µg)

Negative controll: water used

At last, the cells were plated on appropriate agar- plates with SC -Ura medium and incubated at 30°C for the next three days. Colonies should be visible on friday.

Yeast transformation with p542 and p549

Investigator: Roman

Aim of the experiment: Transformation of yeast cells (INVSC1) with the plasmids p542 and p549

Operational sequence:

The yeast transformation was performed as described in the pYES2 manual of Invitrogen (see small scale yeast transformation), using an over night culture of INVSC1- yeast cells. The solutions 1xTE and 1xLiAc/40% PEG 3350/1xTE were made immediately before use.

1xTE:

5µl of 10x TE were mixed with 45µl ddH2O and sterile filtrated.

1xLiAc/40% PEG 3350/1xTE

At first, 3,5g PEG 3350 were dissolved in 7ml of bidestillated water, resulting in a 50% PEG solution. 6,4ml of this 50% PEG solution were mixed with 800µl 10xTE and 800µl 10x LiAc and sterile filtrated.

Used amount of vector DNA:

p542: 5µl
p549: 13µl

Positive controll: eGFP (see caffeine group) Negative controll: water used

At last, the cells were plated on appropriate agar- plates with SC -Ura medium and incubated at 30°C for the next three days. Colonies should be visible on friday.

Preparation of over night cultures for yeast expression

Investigator: Roman

Aim of the experiment: Expression of enzymes CaXMT1, CaMXMT1 and Protein eGFP in yeast.

Operational sequence:

To express the gene products, a single yeast colonie (transformation was performed on last wednesday) of each plate was used for inoculation of 15ml SC -URA 2% glucose medium. However, there was no colony of a pYES2_RFC25_CaDXMT1 transformant (repetition of transformation is already in progress). Incubation was performed at 30°C over night and 180 rpm.

Preparation of over night cultures of positive sequenced clones B1B, B2A and B3D for plasmid isolation and stock generation

Investigator: Dennis

Aim of the experiment: The sequencing of the named clones was positive. Thus, a small amount (has been stored in the fridge for a few days, i.e. a rest of the last over night culture) of each clone was used for inoculation of 8ml LB medium containing chloramphenicol (8µl). Incubation was performed at 37°C over night at 180 rpm.

Wednesday, August 29th

Preparative digestion of GFP (P567), Limonesynthase (P509), ADH-P (720 bp) (P565)

Investigator: Georg

Reaction batch for digestion:

volume	reagent
3 µl	PstI-HF (NEB)
3 µl	XbaI (NEB)
6 µl	NEB-4 buffer
0,6 µl	100 x BSA (NEB)
47,4 µl	dd H20
=60 µl	TOTAL

To 20 µl reaction batch 20 µl of plasmid with insert were added
Digestion was performed at 37C for 3 hours

Ligation of TEF2-P in psb1c3 with Thaumatin P467

Investigator: Georg Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
0,54 µl (=100 ng)	P492
4,46 µl	P467
1	10x T4-ligase buffer
3,5 µl	dd H20
=10µl	TOTAL

Ligation was performed for 1h at room temperature

Ligation of TEF1-P in psb1c3 with Thaumatin P467

Investigator: Georg Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
0,87 µl (=100 ng)	P493
4,93 µl	P467
1	10x T4-ligase buffer
2,7 µl	dd H20
=10µl	TOTAL

Ligation was performed for 1h at room temperature

Ligation of ADH1-P in psb1c3 with Thaumatin P467

Investigator: Georg Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
2,25 µl (=100 ng)	P494
4,45 µl	P467
1	10x T4-ligase buffer
1,8 µl	dd H20
=10µl	TOTAL

Ligation was performed for 1h at room temperature

Ligation of psb1c3 P132 with Thaumatin P467

Investigator: Georg Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
1,49 µl	P132
6,51 µl	P467
1	10x T4-ligase buffer
1,8 µl	dd H20
=10µl	TOTAL

Ligation was performed for 1h at room temperature

Ligation of Cyc1-T (P130) in psb1c3 (P132)

Investigator: Georg Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
6,51 µl	P130
1,49 µl	P132
1	10x T4-ligase buffer
0,5 µl	dd H20
=10µl	TOTAL

Ligation was performed for 1h at room temperature

Ligation of TEF1-T in psb1c3 P132

Investigator: Georg Procedure:

Reaction batch for Ligation:

volume	reagent
0,5 µl	T4-Ligase (1u/µl)
1,49 µl	P132
4,51 µl	PCR62
1	10x T4-ligase buffer
2,5 µl	dd H20
=10µl	TOTAL

Ligation was performed for 1h at room temperature

Preparative gelrun of preparative digested ADH-P, Limonensynthase, GFP

Investigator: Georg Procedure:

Preparative gel was run at 70 V for 3h

Gelextraction of digested (Xba+PST-HF) ADH-P, GFP, Limonens. and psb1c3 (P577)

Investigator: Georg Procedure:

Gelextraction was performed according to Quiaquick extraction protocoll

Transformation of E.coli Xl1-blue with ligation batch (1h) psb1c3 with Thaumatin, Cyc1-T, TEF1-T and Thaumatin with P492,P493 and P494

Investigator: Georg Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

10 µl of ligation product (P265B) was added to 100 µl of competent cells and gently mixed.

30 min incubation on ice

5 min. heat shock at 37°C

Adding of 1ml LB-medium to each tube.

Incubation for 45min at 37°C in the 180rpm cell-culture shaker.

100µl of those cell suspension were plated on Chloramphenicole plates.

The rest were centrifuged for 1min at 13000rpm and the supernatant was dicarded.

The pellet was resuspended in 100µl of LB-medium and this concentrated cell suspension was plated again on new ampicillin plates.

Transformation of E. coli XL1-Blue with ligation product P399+P552

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P399+P552 for the construction of N'-SV40NLS-PhyB(908NT)-20aaLinker-Gal4DBD-C'.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of the ligation products (P399+P552) and it's negative control (P399 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.

Incubation at 37 °C overnight.

Preperative digestion and gelelectrophoresis of P473 and p556

Investigator: Jeff

Aim of the experiment: Preperative digestion and gelelectrophoresis of P473 and p556

Procedure:

Reaction batch for preperative digestion of P473 with XbaI+PstI-HF

volume	reagent
20 µl	P473
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch for preperative digestion of P556 with XbaI+PstI-HF

volume	reagent
20 µl	P556
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Preperative digestion was performed for 2.5 h at 37 °C.

4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.

Preperative gelelectrophoresis was perforemd at 70 V for 1.5 h.

100 bp DNA ladder	P473 (XbaI+PstI-HF)	P556 (XbaI+PstI-HF)	1 kbp DNA ladder
	Digested Backbone (lower band!) was cut out	Digested Backbone pYESnew without promoter was cut out

The gel oucuts were undergone a gel extraction with the gel extraction kit from Qiagen.

Cycled ligation of P571+PCR72

Investigator: Jeff

Aim of the experiment: Cycled ligation was performed for P571+PCR72 and it's negative control P571 NK.

Procedure:

Ligation batch for P571+PCR72

volume	reagent
2.54 µl	P571 (39.3 ng/µl, 2048 bp)
5.19 µl	PCR72 (23.2 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
9.27 µl	ddH2O
=20 µl	TOTAL

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Transformation of E. Coli with ligation products

Investigator: Martin

Aim of the experiment:Transform E.coli XL 1 blue with ligation products of ligation 28.8.

Transformations:

1. PCR57 (digested 7th August) in pSB1C3 (P133)

3. PCR 42 (digested 7th August) in pSB1C3 (P133)

Transformation into E.coli Xl1-Blue

   thawing of 100 µl Ca-competent E.coli XL1-Blue cells on ice
   adding of 1 µl of DNA (positive plasmids) or of 5 µl of ligation products
   incubation for 30 min on ice
   heat shock for 5 min at 37 °C
   adding of 1 ml LB-medium without antibiotics to the cells and incubation at 37°C and 180 rpm for 45 min
   plating of 100 µl of the cells on an Chloramphenicol-plate (pSB1C3, P133)

Small Scale Yeast Transformation - Preparatory culture

Investigator: Martin, Alois

Aim: Preculture of S. cerevisiae according to pYes2_manuel_kommentiert.

1. Inoculate 4 ml of YPD medium with a colony of S. cerevisiae and shake well overnight at 30 °C.

Results:

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Transfer of a certain amount of transformed Saccharomyces cerevisiae cells from yesterday to new medium with galactose for protein expression in yeast

Measurement: OD600 = 1.9 (used OD600 = 0.4)
10.5 ml of resuspended S. cerevisiae were added to 39.5 ml SCU medium with galactose for reaching OD600 = 0.4
Incubation at 30 °C overnight

Picking of colonies

Investigator: Andrea

Procedure:

Picking of 6 clones each of PCR56 pYES and PCR57 pYES (transformation 28th August)
Inbucation at 37°C (shaker) over night.

Picking of Integrationvector_mOrange

Investigator: Martin

Aim:To gain a stock of plasmids in order to integrate biobricks into yeast genome

Procedure: Pick a clone from the plate, put it into 7 ml LB-medium (7 µl Ampicillin added) and incubate over night.

Sequencing

Investigator: Lara

Aim: Repetition of sequencing to check whether insert is wrong. This time, p546 (PCR56/p133)and p512 (PCR58/p133) were sequenced. Furthermore, p550 (PCR58/pYES) was sequenced.

p133: Primer VF2
pYES: Primer T7

Yeast expression Part 1

Investigator: Roman

Aim: Induction of protein expression of CaXMT1, CaMXMT1 and eGFP

Operational sequence:

At first, the OD600 of the over night cultures were measured:

CaXMT1: 4,4/ml
CaMXMT1: 3,9/ml
eGFP: 4,5/ml

(1/10 dilutions have been prepared for measurment)

To obtain an OD of 0,4/ml in 50ml of SC -URA 2% gal medium, 4,5ml, 3,9ml and 4,5ml of the over night cultures were centrifuged at 1500xg for minutes at 4°C. Afterwards, the pellet was resuspended in 2ml SC -URA 2% gal. The suspension was then given to 48ml SC -URA 2% gal medium, followed by incubation at 180rpm and 30°C.

Afterwards, 5ml samples were taken of each culture after incubation times of 20min, 140 min and 320 min. The samples were first stored in the fridge and then centrifuged at 1500xg and 4°C for 5 minutes. After washing with 500µl sterile water, the pellet was stored at -80°C until further usage (cell lysis). Furthermore, the OD600 was measured:

After 20 min:

CaXMT1: 0,41
CaMXMT1: 0,40
eGFP: 0,42

After 140 min:

CaXMT1: 0,43
CaMXMT1: 0,42
eGFP: 0,45

After 320 min:

CaXMT1: 0,5
CaMXMT1: 0,45
eGFP: 0,5

Preparation of glycerol stocks of positive sequenced pSB1C3_Insert clones

Investigator: Roman

Operational sequence: 750µl of each of the three over night cultures with pSB1C3_CaXMT1 (clone B1B), pSB1C3_CaMXMT1 (clone B2A) and pSB1C3 (clone B3D) were mixed with 250µl glycerol and stored at -80°C (in the box of the competent XL1-blue cells).

Sequencing of newly prepared pYES2_RFC25_Insert plasmids (clones: Y1G, Y2G, Y3G)

Investigator: Roman

Aim: Proof of inserted sequence (former sequencing failed)

Results:

Coming Up

Miniprep

Investigator: Dennis

Aim: Miniprep of over night cultures with number B2A, B1B, B3D (clones were isolated of overnightculture, 5ml LB-medium with CHLP).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl of elution buffer (Kit) at room temperature, with the columns having been incubated 5 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

Preperative digestion of B2A, B1B, B3D

Investigator: Dennis

Aim of the experiment: digestion of pSB1C3_CaXMT1 (clone B1B), pSB1C3_CaMXMT1 (clone B2A) and pSB1C3 (clone B3D) Procedure:

Reaction batch:

volume	reagent
40 µl	B1B, B2A, B3D
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
2,5 µl	ddH2O
=50 µl	TOTAL

preperative Gelelectrophoresis

Investigator: Dennis

4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.

Preperative gelelectrophoresis was perforemd at 90 V for 1 h.

1 kbp DNA ladder

pSB1C3_CaMXMT1 (clone B2A)

pSB1C3_CaMXMT1 (clone B1B)

Digested Inserts B1B, B2A was cut out (lower band!- ca1200bp)

1 kbp DNA ladder

pSB1C3_CaMXMT1 (clone B3D)

Digested Insert B2D was cut out (lower band!- ca1200bp)

Gelextraction

Investigator:Dennis

Gelextraction of B2A, B1B, B3D was performed according to Quiaquick gel extraction protocol
following concentrations were detected by Nanodrop:
B2A ==> 13,6 ng/µl
B1B ==> 12,8 ng/µl
B2D ==> 8,4 ng/µl

Cycled ligation of P492+B2A, P4492+B1B, P493+B3D

Investigator: Dennis

Aim of the experiment: Cycled ligation was performed for P492 (Konz: 91 ng/µl), P493 (Konz: 57 ng/µl)

Procedure:

Ligation batch for P492+B2A

volume	reagent
2 µl	P492 (91 ng/µl, 2048 bp)
16,5 µl	B2A (13,5 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
=21 µl	TOTAL

Ligation batch for P492+B1B

volume	reagent
2 µl	P492 (91 ng/µl, 2048 bp)
16,5 µl	B1B (12,4 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
=21 µl	TOTAL

Ligation batch for P493+B3D

volume	reagent
1,25 µl	P493 (91 ng/µl, 2048 bp)
17,5 µl	B3D (8,4 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
=20 µl	TOTAL

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Gelelectrophoresis of colony pcr products

Investigator: Lara

Aim: Check products of colony pcr whether there are positive clones.

Results: See pictures that were uploaded into lab journal entry of colony pcr (august 28th).

--> Positive clones were transferred into 4 ml of LB medium with antibiotic (Chlp -> pSB1C3)

--> please prep plasmid DNA and do an analytical restriction digest

Thursday, August 30th

Miniprep of picked colonies from E.coli transformed with TEF2-P in psb1c3 from P451

Investigator: Georg

Miniprep was performed according Quiaprep plasmid extraction kit

Preparative digestion of TEF2-psb1c3 clones P588 and P591

Investigator: Georg

Reaction batch for digestion:

volume	reagent
2 µl	PstI-HF (NEB)
2 µl	XbaI (NEB)
8 µl	NEB-4 buffer
0,8 µl	100 x BSA (NEB)
29,2 µl	dd H20
=40µl	TOTAL

To 20 µl reaction batch 20 µl plasmid-DNA was added
Digestion was performed for 3 h at 37C

Preparative gelrun of P588 and P591

Investigator: Georg

2x40 µl of preparative digestion was loaded on 1% preparative agarose gel

Gelextraction of digested TEF2-P

Investigator:Georg

Gelextraction was performed according to Quiaquick gel extraction protocoll

Nanodrop measurement

Investigator: Georg

P578 Limonens.: 36,7 ng/µl
P576 GFP: 15,7 ng/µl
P575 ADH-P: 11,2 ng/µl
P588 TEF2-P: 289,7 ng/µl
P589 TEF2-P: 225,1 ng/µl
P590 TEF2-P: 260,5 ng/µl
P591 TEF2-P: 433,2 ng/µl
P592 TEF2-P (Preparative digestion (XBAI+PSTI-HF)): 50 ng/µl

Ligation of P494 and P567

Investigator: Georg

Procedure:

Reaction batch for Ligation:

volume	reagent
1 µl	T4-Ligase (1u/µl)
4,52 µl (=100 ng)	P494
4,88 µl (=100 ng)	P567
2	10x T4-ligase buffer
7,6 µl	dd H20
=20µl	TOTAL

Ligation was performed 1h at room temperature

Ligation of P492 and P567

Investigator: Georg

Procedure:

Reaction batch for Ligation:

volume	reagent
1 µl	T4-Ligase (1u/µl)
1,08 µl (=100 ng)	P492
4,92 µl (=100 ng)	P567
2	10x T4-ligase buffer
11 µl	dd H20
=20µl	TOTAL

Ligation was performed 1h at room temperature

Ligation of P493 and P567

Investigator: Georg

Procedure:

Reaction batch for Ligation:

volume	reagent
1 µl	T4-Ligase (1u/µl)
1,73 µl (=100 ng)	P493
5,37 µl (=100 ng)	P567
2	10x T4-ligase buffer
9,9 µl	dd H20
=20µl	TOTAL

Ligation was performed 1h at room temperature

Gelextraction of digested TEF2-P (XbaI+PstI)

Investigator:Georg

Gelextraction was performed according to Quiaquick gelextraction-kit

Preparation of new Chloramphenicole plates

Investigator: Georg

To 2 L of LB-Medium 15 g Agar was added
The mixture was then autoclaved
2 ml 1000x Chloramphenicole was given when temperature has cooled down properly
Agar was distributed to plates and then stored in the cooler

Transformation of E. coli XL1-Blue with ligation product P571+PCR72

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P571+PCR72 for bricking the fusion protein of N'-SV40NLS-Gal4AD-Linker-Pif3-C'.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of the ligation products (P571+PCR72) and it's negative control (P571) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.

Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with ligation products of P399+P552

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P399+P552.

Procedure:

6 colonies of the transformation with P399+491 (CamR) and 10 colonies of the transformation with P399+P552 (CamR) were taken.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of E. coli XL-Blue cells, transformated with P20 (BBa_J04450 in pSB1C3)

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with P20 (BBa_J04450 in pSB1C3), in order to introduce RFC25 pre- and suffix by PCR to the RFP generator device as a helper construct for cloning with RFC25/RFC10 parts.

Procedure:

4 colonies of the transformation with P20 (CamR) and were taken.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and 4 µl of chloramphenicol (1000x). These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Design of an minimal multiple cloning site to insert protein coding part between promoter and terminator for pYES2new-without-promoter and pSB1C3

Investigator: Jeff

Ask me if you want to use constitutive promoter and terminator for express your target enzyme or protein or you want to integrate your coding device into the genome!! (Jeff)

Cycled ligation of P572 with P299, P575, P592, PCR59

Investigator: Jeff

Aim of the experiment: Ligation of TEF1-P, TEF2-P, ADH1-P in pYES2-TUM

Procedure:

Reaction batch for Ligation:

volume	reagent
1 µl	T4-Ligase (1u/µl)
3,12 µl (=100 ng)	P572
2	10x T4-ligase buffer
2,08 µl	P299
12,3 µl	dd H20
=20µl	TOTAL

Procedure:

Reaction batch for Ligation:

volume	reagent
1 µl	T4-Ligase (1u/µl)
3,16 µl	P572
2	10x T4-ligase buffer
3,84µl	P575
10 µl	dd H20
=20µl	TOTAL

Procedure:

Reaction batch for Ligation:

volume	reagent
1 µl	T4-Ligase (1u/µl)
3,13 µl	P572
2	10x T4-ligase buffer
3,27µl	PCR59
10,5 µl	dd H20
=20µl	TOTAL

Procedure:

Reaction batch for Ligation:

volume	reagent
1 µl	T4-Ligase (1u/µl)
3,18 µl	P572
2	10x T4-ligase buffer
0,82 µl	P592
13 µl	dd H20
=20µl	TOTAL

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Yeast expression Part 2

Investigator: Roman

Aim of the experiment: Expression of gen products CaXMT1, CaMXMT1 and eGFP

Analogous to yesterday, one more sample of each yeast culture growing in SC -URA 2%gal medium was taken (5ml), 20h and 24h after induction. Furthermore, the OD600 was determined:

20h:

CaXMT1: 4,9
CaMXMT1: 4,6
eGFP: 5,8

24h:

CaXMT1: 5,6
CaMXMT1: 5,4
eGFP: 6,8

The samples were handled as described yesterday and stored at -80°C

Note: At the eGFP pellet is green ==> expression of positive control works

Transformation of E. coli

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of P492+B1B, P492+B2A, P493+B3D.

Procedure:

20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.

Incubation at 37 °C overnight.

Small scale yeast transformation of S. cerevisiae with pYes2_Preprothaumatin, Integration-Vector_mOrange and pYes2_GFP

Investigator: Martin, Alois

Procedure according to pYes2_manual_kommentiert:

2. Determine the OD600 of your overnight culture. Dilute culture to an OD600 of 0.4 in 50 ml of YPD medium, add 5ml 20% glucose and grow an additional 2–4 hours.

3. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 40 ml 1X TE. 4. Pellet (5 min, 4°C) the cells at 2500 rpm and resuspend the pellet in 2 ml of 1X LiAc/0.5X TE. 5. Incubate the cells at room temperature for 10 minutes. 6. For each transformation, mix together 1 μg plasmid DNA and 100 μg (10 μl) denatured sheared salmon sperm DNA with 100 μl of the yeast suspension from Step 5. 7. Add 700 μl of 1X LiAc/40% PEG-3350/1X TE (7 ml 50% PEG3350 was synthesized (3.5 g in 7 ml bidest.water); 6.4 ml 50% PEG3350 + 800 μl 10x LiAc + 800 μl 10x TE were mixed) and mix well. 8. Incubate solution at 30°C for 30 minutes. 9. Add 88 μl DMSO, mix well, and heat shock at 42°C for 7 minutes. 10. Centrifuge in a microcentrifuge for 10 minutes and remove supernatant. 11. Resuspend the cell pellet in 1 ml 1X TE and re-pellet. 12. Resuspend the cell pellet in 50–100 μl 1X TE and plate on a selective plate (SCU-plates + Glucose, respectively Kanamycin-YPD plates for the Integration-Vector_mOrange). Incubate the plates at 30°C over the weekend.

Name: pYes2_Thaumatin/Integ-Vek/GFP, S. cerevisiae, Schappert, Bräuer.

Miniprep of Integvek_mOrange

Investigator: Martin, Alois

Aim: To gain enough plasmid to digest with restriction enzymes (and ligate with other inserts than the mOrange) and to transform yeast.

Procedure: Miniprepkit - Qiagen, Procedure according to the manual

Gelextraction of Thaumatin, Limonene-Synthase and Integration-Vector-Backbone

Investigator: Martin, Alois

Aim: P583 (Thaumatin), 584 (Limonene-Synthase), 585 (Integration-vector-backbone)

Procedure: Gelextraction with a 1%-LMP-Agarose-Gel - Qiagen Gelextraction Kit

Picture of Integration-Vector (Backbone at 3650 bp)

Picture of Thaumatin (721 bp, upper) and Limonene (1650bp, lower)

Ligation of Thaumatin/Limonene and Integration-Vector

Investigator: Martin, Alois

Aim: Ligate the Thaumatin/Limonene as inserts into the Integration-Vector.

Procedure:

Ligation batch for P583+P585 and P584+P585

volume	reagent
5.5 µl	P585 (18,4 ng/µl, 3600 bp)
4.6 µl	P583 (13.1 ng/µl, 721 bp)	P584 (28.5 ng/µl, 1650 bp)
0,5 µl	BSA
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
5.9 µl	ddH2O
=21 µl	TOTAL

Transformation of E. Coli XL1blu with Integ-Vec_Thaumatin and Integ-Vec_Limonene-Synthase

Investigator: Martin, Alois

Aim: To establish a E. Coli-Strain carrying the Integration-Vector backbone with a Thaumatin, respectively Limonene-Synthase, insert.

Procedure: The products of the Ligation before were used to transform E. Coli XL1blu. For the procedure have a close look at the quadrizillion transformations before. I'm outta here.

Miniprep of ligation products and colony PCR products

Investigator: Andrea

Aim: Check ligation products (PCR56/P375 (pYES), PCR57/P375 (pYES)). Check colony PCR clones (3, 5, 6, 7, 8) .

PCR56/pYES (tube 1): 242 ng/µl
PCR56/pYES (tube 2): 71 ng/µl
PCR56/pYES (tube 3): 63 ng/µl
PCR56/pYES (tube 4): 36 ng/µl
PCR56/pYES (tube 5): 137 ng/µl
PCR56/pYES (tube 6): 63 ng/µl

PCR57/pYES (tube 1): 74 ng/µl
PCR57/pYES (tube 2): 98 ng/µl
PCR57/pYES (tube 3): 124 ng/µl
PCR57/pYES (tube 4): 100 ng/µl
PCR57/pYES (tube 5): 152 ng/µl
PCR57/pYES (tube 6): 85 ng/µl

Colony PCR (clone 3): 63.5 ng/µl
Colony PCR (clone 5): 101 ng/µl
Colony PCR (clone 6): 161.5 ng/µl
Colony PCR (clone 7): 61 ng/µl
Colony PCR (clone 8): 59 ng/µl

Eppis are stored in a disposal bag (label: Miniprep, Andrea, 30.8.) in the middle drawer of -20°C.

Analytical restriction digest of transformed ligation products and colony PCR products

Investigator: Andrea

Aim: Check that transformed clones are positive.

PCR56/pSB1C3 (transformation 28th August)
PCR57/pSB1C3 (transformation 28th August)
Colony PCR (clone 3, 5, 6, 7, 8)

volume	reagent
3 µl	plasmid DNA
0.25 µl	Xba 1
0.25 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
14.3 µl	ddH2O

Gelelectrophoresis:

expected:

Limonene synthase 1600 bp

pSB1C3 (P133) 2000 bp

ligations negative colony PCR products negative

Preparation of cells of protein expressed yeasts

Investigator: Andrea

Aim of the experiment: Get yeast cell pellets for further cell disruption

measure OD600 at different time points (after 15 hours, 20 hours, 24 hours)
centrifugation of each 5 ml (4°C, 5 min, 5000x g)
resuspend pellet in 1ml ddH2O
centrifugation of each resuspended pellet (4°C, 5 min, 5000x g)
stored pellet at -20°C

Preparation of PMSF solution

Investigator: Andrea

Aim of the experiment: Get PMSF solution for breaking buffer for yeast expression procedure

0.0174 g in 1ml Isopropanol (techn.)
stored Eppi at 4°C (great iGEM fridge)
added 60 µl to breaking buffer --> breaking buffer + PMSF ready for yeast cell disruption

Friday, August 31st

Miniprep of E. coli XL-Blue cells, transformated with ligation product of P399+P552

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products of P399+P552 (P573).

Procedure:

Miniprep was done after manufacturer's protocol. (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of the minipreps P601-P606

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps P601-P606 with XbaI+PstI-HF.

Procedure:

Mastermix for analytical digestion for P601-P606 with XbaI+PstI-HF:

volume	reagent
14 µl	NEBuffer 4 (10x)
1.4 µl	BSA (100x)
1.75 µl	XbaI (20 U/µl)
1.75 µl	PstI-HF (20 U/µl)
103.6 µl	ddH2O
=122.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P601-P606).

The reaction mixes were incubated at 37 °C for 90 min.

9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).

Analytical gelelectrophoresis was performed at 90 V for about 60 min.

P601-P606:

100 bp DNA ladder	P601	P602	P603	P604	P605	P606	1 kbp DNA ladder
	Ligation seems to be successful. Sequencing has to be done!	Ligation seems to be successful. Sequencing has to be done!	Ligation seems to be successful. Sequencing has to be done!	Ligation seems to be successful. Sequencing has to be done!	Ligation seems to be successful. Sequencing has to be done!	Ligation seems to be successful. Sequencing has to be done!

Picking of E. coli XL-Blue cells, transformated with ligation products of P571+PCR72

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products of P571+PCR72.

Procedure:

6 colonies of the transformation with P571+PCR72 (CamR) were taken.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of clones: PSB1C3_P57 and PSB1C3_P42

Investigator: Martin, Alois (???)

Aim: Picking of E. coli XL-Blue cells, transformated with ligation products of P113 and P57/P42.

Procedure:

2 colonies of the transformation (29th August) from each plate were taken, 4 in total.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 7 ml of LB-medium and chloramphenicol. These tubes were put in a 180 rpm cell culture shaker at 37 °C overnicht.

Harvest proteins expressed in yeasts

Aim: Cell disruption for harvesting proteins expressed in yeasts

Procedure:

resuspending stored cell pellets in defined volume of braking buffer + PMSF
adding glass beads to eppis
vortex for 30 min and incubate on ice for 30 min (repetition for 25 times)
centrifuge at 4 °C, full speed, 10 min
take supernatant and centrifuge at 4 °C, full speed, 10 min again
store supernatant at -80°C (second box)

concentrations

LS (15 hours after galactose induction): 4.053 mg/ml

LS (20 hours after galactose induction): 1.932 mg/ml

LS (24 hours after galactose induction): 4.828 mg/ml

Caffein CaXMT1 (20 hours after galactose induction): 10.142 mg/ml

Caffein CaXMT1 (24 hours after galactose induction): 2.433 mg/ml

Caffein CaMXMT1 (20 hours after galactose induction): 8.508 mg/ml

Caffein CaMXMT1 (24 hours after galactose induction): 4.712 mg/ml

Caffein eGFP (20 hours after galactose induction): 6.661 mg/ml

Caffein eGFP (24 hours after galactose induction): 4.244 mg/ml

Repitition of analytical restriction digest of transformed ligation products and colony PCR products

Investigator: Andrea

Aim: Check that transformed clones are positive.

PCR56/pSB1C3 (transformation 28th August)
PCR57/pSB1C3 (transformation 28th August)
Colony PCR (clone 3, 5, 6, 7, 8)

volume	reagent
3 µl	plasmid DNA
0.5 µl	Xba 1
0.5 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
12.8 µl	ddH2O

incubation: 2 hours, 37°C

Gelelectrophoresis:

needs to be done

Analytical restriction digest of schwab vectors

Investigator: Andrea

Aim: Check that schwab plasmids and insert are right.

volume	reagent
3 µl	P40
0.3 µl	Nco1
0.3 µl	Hind3
2 µl	Tango Buffer
11.4 µl	ddH2O

volume	reagent
3 µl	P42
0.3 µl	Not1
0.3 µl	EcoR1
2 µl	Orange Buffer
11.4 µl	ddH2O

incubation: 2 hours, 37°C
digested probes were stored at -20°C (Ingmar)

Gelelectrophoresis:

needs to be done

Preparation of SC-U medium with 2% glucose (2 l) or galactose (2 l) for expression in Saccharomyces cerevisiae

Investigator: Maddin

4 x 1 l medium:

One aliquot (50 ml) of amino acids prepared by Alois Bräuer was used
6.7 g yeast nitrogen base
850 ml ELGA water
autoclaving

Sugar solution were prepared separately:

40 g glucose were dissolved in 200 ml ELGA water
40 g galactose were dissolved in 200 ml ELGA water
autoclaving

After autoclaving:

100 ml of glucose solution were added to 1 l SC-U medium, 2x50 ml were added to 2x500 ml SC-U medium.
100 ml of galactose solution were added to 1 l SC-U medium, 2x50 ml were added to 2x500 ml SC-U medium.

Notes: The media are stored in the shelf above the bench in the iGEM laboratory.

Picking of clones: Integvec_Thaumatin (P585_P583) and Integvec_Limonene-Synthase (P585_P584)

Investigator: Martin, Alois

Aim: Picking of E. coli XL-Blue cells, transformated with ligation products of P585 and P583/P584.

Procedure:

2 colonies of the transformation from each plate were taken, 4 in total.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 7 ml of LB-medium and Ampicillin. These tubes were put in a 180 rpm cell culture shaker at 37 °C overnight.

Saturday, September 1st

Miniprep of E. coli XL-Blue cells, transformated with ligation product of P571+PCR72

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products of P571+PCR72 (P586).

Procedure:

Miniprep was done after manufacturer's protocol (P611-P616). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of the minipreps P611-P616

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of the minipreps P611-P616 with XbaI+PstI-HF.

Procedure:

Mastermix for analytical digestion for P601-P606 with XbaI+PstI-HF:

volume	reagent
14 µl	NEBuffer 4 (10x)
1.4 µl	BSA (100x)
1.75 µl	XbaI (20 U/µl)
1.75 µl	PstI-HF (20 U/µl)
103.6 µl	ddH2O
=122.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P611-P616).

The reaction mixes were incubated at 37 °C for 90 min.

9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).

Analytical gelelectrophoresis was performed at 90 V for about 60 min.

P611-P616:

100 bp DNA ladder	P611	P612	P613	P614	P615	P616	PCR72 control	1 kbp DNA ladder
	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!	Ligation successful!

N'-SV40-Gal4AD-Linker-Pif3-C' has been successfully cloned with RFC10 pre- and suffix into pSB1C3.

Analytical restriction digest of schwab vector and repetition of ligation product and colony PCR products (continue)

Investigator: Andrea

Aim: Check that schwab plasmids and insert are right.

Gelelectrophoresis:

expected:

Limonensynthase: 1600 bp

pYES: 5800 bp

pSB1C3: 2000 bp

pGEX: 5000 bp

pET: 5700 bp

ligations: failed

colony PCR: negative

Miniprep of ligation products of P57 and P42

Investigator: Andrea

Aim: Check ligation products (PCR57/pSB1C3, PCR42/pSB1C3).

PCR57/pSB1C3 (1): 155.8 ng/µl
PCR57/pSB1C3 (2): 65.1 ng/µl

PCR42/pSB1C3 (1): 217.7 ng/µl
PCR42/pSB1C3 (2): 52.4 ng/µl

ligation products (P57/P42) are stored in a 50 ml Falcon tube (label: Miniprep, Andrea, 01.09.) in the upper drawer of -20°C.

Miniprep of ligated integration vector

Investigator: Andrea

Aim: Check integration vector with thaumatin (P607, P608) and limonensynthase (P609, P610).

Integration vector + Thaumatin (1): 580 ng/µl
Integration vector + Thaumatin (2): 383.8 ng/µl

Integration vector + Limonensynthase (1): 484.2 ng/µl
Integration vector + Limonensynthase (2): 714.7 ng/µl

ligation products (integration vector) are stored in plasmid box 6 (P607 - P610)

Sunday, September 2nd

Picking of S. cerevisiae clones from SC-U plates (pYes_preprothaumatin and pYes_limonene-synthase) and YPD-Kan plates (integrational vector)

Investigator: Martin

Aim: to establish a strain of S. cerevisiae with desired genotype

Procedure: Same procedure as every year.

Miniprepping of Clones (Schorsch! Nachtragen!)

Investigator: Martin Results: Probably Dreck. Maybe doch nicht!

P617-P637

Week 13

Monday, September 3rd

Analytical digestion and gelelectrophoresis of the minipreps P534-P539, P611-P616

Investigator: Jeff

Aim of the experiment: To prove whether SV40 NLS (contains a KpnI resstriction site) are successfully fused to in the minipreps (P534-P539 and P601-P606).

Procedure:

Mastermix for KpnI-HF(NEB)+BamHI(Fermentas)

volume	reagent
26 µl	NEBuffer 4 (10x)
2.6 µl	BSA (100x)
3.25 µl	KpnI-HF (20 U/µl) (NEB)
6.5 µl	BamHI (10 U/µl) (Fermentas)
189.15 µl	ddH2O
=227.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P534-P539, P601-P606).

The reaction mixes were incubated at 37 °C for 90 min.

9 µl of the digested DNA was mixed with 1 µl of DNA loading buffer (10x).

Analytical gelelectrophoresis was performed at 90 V for about 60 min.

100 bp DNA ladder	P534	P535	P536	P537	P538	P539	1 kbp DNA ladder
	SV40 NLS successfully fused!	SV40 NLS successfully fused!	SV40 NLS successfully fused!	SV40 NLS successfully fused!	SV40 NLS successfully fused!	SV40 NLS successfully fused!

100 bp DNA ladder	P601	P602	P603	P604	P605	P606	1 kbp DNA ladder
	SV40 NLS successfully fused!	SV40 NLS successfully fused!	No SV40 NLS fused!	SV40 NLS successfully fused!	SV40 NLS successfully fused!	SV40 NLS successfully fused!

Preperative digestion and preperative gelelectrophoresis of P616, P606, P539, P638

Investigator: Jeff, Georg

Aim of the experiment: Preperative digestion and preperative gelelectrophoresis of:

P616 (SV40NLS-Gal4AD-Linker-Pif3(100NT)) (XbaI + PstI-HF)

P606 (SV40NLS-PhyB(908NT)-20aaLinker-Gal4DBD) (SpeI-HF + PstI-HF)

P539 (SV40NLS-PhyB(908NT)-20aaLinker-LexA) (SpeI-HF + PstI-HF)

P638 (TEF1 terminator) (SpeI-HF + PstI-HF and SpeI-HF + PstI-HF ).

Procedure:

volume	reagent
20 µl	P616
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

volume	reagent
20 µl	P606
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	SpeI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

volume	reagent
20 µl	P539
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	SpeI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

volume	reagent
15 µl	P638
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
18.6 µl	ddH2O
=40 µl	TOTAL

volume	reagent
15 µl	P638
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	SpeI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
18.6 µl	ddH2O
=40 µl	TOTAL

Preperative digestion was performed at 37 °C for 2.5 h.

Preperative gelelectrophoresis was performed at 70 V for 3 h.

100 bp DNA ladder	P616 XbaI + PstI-HF	1 kbp DNA ladder	P606 SpeI-HF + PstI-HF	P606 SpeI-HF + PstI-HF
	Lower band was cut out		Band was cut out	Band was cut out

100 bp DNA ladder	P638 XbaI + PstI-HF	1 kbp DNA ladder	P638 SpeI-HF + PstI-HF
	Band was cut out		Band was cut out

Analytical digest and gel electrophoresis

Investigator: Andrea Aim: Check that transformed clones are positive.

PCR42/pSB1C3 (transformation 29th August)
PCR57/pSB1C3 (transformation 29th August)

volume	reagent
3 µl	plasmid DNA
0.5 µl	Xba 1
0.5 µl	Spe-HF 1
2 µl	NEB
0,2 µl	BSA
12.8 µl	ddH2O

incubation: 2 hours, 37°C

Gelelectrophoresis:

all ligations: negative

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Picking transformed Saccharomyces cerevisiae cells for protein expression in yeast

Inoculation of overnight cultures: one clone from plate with PCR 1 in P175 clone 2 (Miniprep 21.08.) (29) & one clone from plate with P542 (Miniprep 28.08.) was picked,resuspended in 15 ml SCU medium with glucose and incubated at 30 °C overnight

SDS- Page of crude extract (CaXMT1, CaMXMT1 and eGFP expression, as well as three samples of the limonene group)

Investigator: Roman, Andrea

Aim of the experiment:

Aim of the experiment is the proof of successful protein expression of CaXMT1, CaMXMT1 and eGFP (used as positive controll), as well as xxx (limonene).

Operational sequence:

The SDS gel was prepared as previously described (12%). 10µl of cell lysate (20h after induction of expression) was mixed with 2,5 µl Laemmli- RED SDS loading buffer, resulting in an amount of protein 100µg (CaXMT1- crude extract), 80µg (CaMXMT1- crude extract) and 60µg (eGFP- crude extract).

The proteins were separated at 120V for about 1,5 hours. Afterwards, we did a western blot and used the same gel for a staining with coomassie brilliant blue.

Picture of gel (after having washed it with washing solution 1 (15 min) and 2 (4 hours):

Prestained Proteine Ladder

LimX

Limy

Limz

CaXMT1

CaMXMT1

eGFP

Preparation of cells for transformation in yeast

Investigator: Andrea

Aim of the experiment:Picking Saccharomyces cerevisiae colony (INVSc1) for frther transformation in yeast

Inoculation of overnight cultures: one clone from plate with INVSc1 from 23.08. was picked,resuspended in 4 ml YPD medium and incubated at 30 °C overnight

Western blot of 20 h samples of the expression of CaXMT1, CaMXMT1 and eGFP

Investigator: Saskia, Andrea

Aim: Analysis of the expression of CaXMT1, CaMXMT1 and eGFP (positive controll)after SDS-PAGE (120V, 1.5 h)

Procedure: preparation of solutions: as described in the materials

PBS-T0.1
PBS-T0.1 with 3% BSA

Blotting:

blotting of proteins on ImmobilonP Membrane (activating in methanol for 10 min)
gel and membrane in transferbuffer for 20 min
50mA, 1 h

Blocking:

wash 3x7min with PBS-T0.1
the membrane is blocked over night in PBS-T0.1 with 3% BSA at 4 °C on a shaking device

Miniprep

Investigator: Dennis

Aim: Miniprep of 9 over night cultures with number B2A (3 times), B1B (3 times), B3D (3 times) (clones were isolated of over night culture, 5ml LB-medium with CHLP).

The plasmid preparation was performed as described in the manufactueres protocol (Quiagen). Elution was done with 40 µl ddH2O at room temperature, with the columns having been incubated 2 minutes at room temperature before the final centrifugation. Miniprep products are stored in a 50 ml Falcon tube in the lowest drawer at -20°C

analytic digestion of B2A, B1B, B3D

Investigator: Dennis

Aim of the experiment: digestion of pSB1C3_CaXMT1 (clone B1B), pSB1C3_CaMXMT1 (clone B2A) and pSB1C3 (clone B3D) Procedure:

Reaction batch:

volume	reagent
2,5 µl	B1B, B2A, B3D
2 µl	NEBuffer 4 (10x)
0,5 µl	Ecor1 (20 U/µl)
0,5 µl	PstI-HF (20 U/µl)
14,5 µl	ddH2O
=20 µl	TOTAL

analytic Gelelectrophoresis

Investigator: Dennis

4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.

analytic gelelectrophoresis was perforemd at 80 V for 1 h.

1 kbp DNA ladder

pSB1C3 CaMXMT1 (clone B2A 3)

pSB1C3 CaMXMT1 (clone B1B 2)

pSB1C3 CaMXMT1 (clone B3D 2)

pSB1C3 CaMXMT1 (clone B1B 1)

pSB1C3 CaMXMT1 (clone B3D 3)

pSB1C3 CaMXMT1 (clone B3D 2)

1 kbp DNA ladder

pSB1C3 (P463)

Transformation of E.Coli with pYES2_RFC25_CaXMT1, pYES2_RFC25_CaMXMT1 and pYES2_RFC25_CaDXMT1 as backup

Investigator: Roman

Aim: To fill up the amount of available pYES2_RFC25 for further yeast transformations

Operational sequence:

The transformation was done as previously described. 100µl of unconcentrated e.coli- cells were plated on ampicillin plates and incubated over night at 37°C.

Tuesday, September 4th

Cycled ligation of P493+P639, P643+P299, P640+P642, P641+P642

Investigator: Jeff

Aim of the experiment: Cycled ligation of P493+P639 (TEF1 promoter + SV40NLS-Gal4AD-30aaLinker-Pif3(100NT)), P643+P299 (TEF1 terminator + TEF1 promoter), P640+P642 (SV40NLS-PhyB(908NT)-20aaLinker-Gal4DBD), P641+P642 (SV40NLS-PhyB(908NT)-20aaLinker-LexA).

Procedure:

Ligation batch for P493+P639

volume	reagent
1.74 µl	P493 (57.5 ng/µl, 2506 bp)
6.31 µl	P639 (15.6 ng/µl, 824 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
8.95 µl	ddH2O
=20 µl	TOTAL

Ligation batch for P643+P299

volume	reagent
1.89 µl	P643 (52.9 ng/µl, 2564 bp)
4.37 µl	P299 (12.6 ng/µl, 472 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
10.74 µl	ddH2O
=20 µl	TOTAL

Ligation batch for P640+P642

volume	reagent
1.03 µl	P640 (97.3 ng/µl, 5366 bp)
2.53 µl	P642 (11.7 ng/µl, 530 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
13.44 µl	ddH2O
=20 µl	TOTAL

Ligation batch for P641+P642

volume	reagent
0.89 µl	P641 (112.9 ng/µl, 5531 bp)
2.45 µl	P642 (11.7 ng/µl, 530 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
13.66 µl	ddH2O
=20 µl	TOTAL

Negative controls were als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batches and were called: P493 NK, P643 NK, P640 NK, P641 NK.

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Preperative digestion of B2A, B1B, B3D

Investigator: Dennis

Aim of the experiment: preperative digestion of pSB1C3_CaXMT1 (clone B1B 2), pSB1C3_CaMXMT1 (clone B2A 3) and pSB1C3 (clone B3D 2) and the ADH1 terminator Procedure:

Reaction batch:

volume	reagent
30 µl	B1B, B2A, B3D, ADH1 Terminator
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
2 µl	SpeI (20 U/µl)
2 µl	PstI-HF (20 U/µl)
10,5 µl	ddH2O
=50 µl	TOTAL

Reaction batch:

volume	reagent
30 µl	ADH1 Terminator
5 µl	NEBuffer 4 (10x)
0.5 µl	BSA (100x)
2 µl	XbaI (20 U/µl)
2 µl	PstI-HF (20 U/µl)
10,5 µl	ddH2O
=50 µl	TOTAL

preperative Gelelectrophoresis

Investigator: Dennis

4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.

analytic gelelectrophoresis was perforemd at 120 V for 1 h.

1 kbp DNA ladder

pSB1C3 CaMXMT1 (ADH1 Terminator)

pSB1C3 CaMXMT1 (clone B2A 3)

pSB1C3 CaMXMT1 (clone B1B 2)

pSB1C3 CaMXMT1 (clone B3D 2)

Gelextraction

Investigator:Dennis

Gelextraction of ADH1 terminator, B2A, B1B, B3D was performed according to Quiaquick gel extraction protocol
following concentrations were detected by Nanodrop:
ADH1==> 16,6 ng/µl
B2A_3 ==> 54,6 ng/µl
B1B_2 ==> 91,8 ng/µl
B3D_2 ==> 28,4 ng/µl

Cycled ligation of ADH1+B2A_3, ADH1+B1B_2, ADH1+B3D_2

Investigator: Dennis

Aim of the experiment: Cycled ligation

Procedure:

Ligation batch for ADH1+B2A_3

volume	reagent
1,6 µl	ADH1 (16,6 ng/µl, 2048 bp)
2 µl	B2A_3 (13,5 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
13 ddH20	=21 µl	TOTAL

Ligation batch for ADH1+B1B_2

volume	reagent
2,66 µl	ADH1 (16,6 ng/µl, 2048 bp)
1,8 µl	B1B_2 (91,4 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
12,5 ddH2O	=21 µl	TOTAL

Ligation batch for ADH1+B3D_2

volume	reagent
0,8 µl	ADH1 (16,6 ng/µl, 2048 bp)
1,9 µl	B3D_2 (28,7 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
14 ddH20	=20 µl	TOTAL

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Preparative restriction digest of p647 and ligation with p642

Investigator: Martin, Alois

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term

Preparative restriction digest:

20 µl p647 (pSB1C3_Ter1Pro_Preprothaumatin), 4 µl NEBufer 4, 0.4 µl BSA, 1 µl SpeI, 1 µl PstI, 13.6 µl ddH2O; 37°C, 2 h.

Preparative gel electrophoresis:

Expected: ca. 3 kb.

Ligation of p648 (= p647 digested with SpeI and PstI) and ligation with p642 ("TER1Term digested with XbaI, PstI"):

1 µl T4 DNA ligase, 2 µl T4 DNA ligase buffer, 2 µl p648, 5 µl p642, 10 µl ddH2O; over night, 16°C.

Western blot analysis of protein crude extract of CaXMT1, CaMXMT1 and eGFP transformants, as well as three samples of limonene synthase

Investigator: Roman

Aim of the experiment:

Detection of expressed proteins CaXMT1, CaMXMT1, eGFP and limonene synthase (citrus).

Operational sequence:

The western blot membran (having been blocked over the night at 4°C) was washed with PBS- T0.1 four times (4x 15min). Afterwards, the membran was incubated for 1h with detection reagent. Detection reagent:

10ml 1xPBS
0,2% BSA (0,02g have been weighted in)
2µl anti body MABclassic

After incubating with the first antibody, the membran was washed again with PBS-T0.1 three times (3x 5min), followed by the incubation with the second antibody (anti mouse, fused with alk. phosphatase) for another our. Second detection reagent:

10ml 1xPBS
0,2% BSA (see above)
5µl AntiMouse-alk. Phosphatase conjugate (1/2000 dilution)

The development was performed after washing the membran with PBS- T0.1 for 10 min (two times) and with 1xPBS for 10 min (two times). For this, the membran was shortly washed with AP buffer and then incubated with a solution containing 15ml AP buffer, 45µl BCIP (50mg/ml in DMF) and 7,5µl NBT (75mg/ml in 70% DMF) for a few minutes, until clear bands appeared.

Western blot membran:

From left to right:

Prestained protein marker (Page Ruler Plus)

Limonene synthase (15h)

Limonene synthase (20h)

Limonene synthase (24h)

CaXMT1 crude extract (20h)

CaMXMT1 crude extract (20h)

eGFP crude extract (20h)

Picking of colonies

Investigator: Saskia

Procedure:

Picking of 3 clones for miniprep: Y2G, Y3G, Y1G (4 ml LB, Amp)
Inbucation at 37°C (shaker) over night.

Picking of colony for yeast transformation

Investigator: Saskia

Procedure:

Picking of 1 clone of S. crevisiae INVSc1 for yeast transformation (4 ml YPD)
Inbucation at 30°C (shaker) over night.

Preparation of cells for protein expression in yeast

Investigator: Andrea

Aim of the experiment:Transfer of a certain amount of transformed Saccharomyces cerevisiae cells from yesterday to new medium with galactose for protein expression in yeast

Measurement: OD600
defined amount of resuspended S. cerevisiae were added to SCU medium with galactose for reaching OD600 = 0.4
Incubation at 30 °C overnight

Yeast transformation with p542 and p551

Investigator: Andrea

Aim of the experiment: Transformation of yeast cells (INVSC1) with the plasmids p542 (PCR2, Citrus) and p551 (PCR58, Lavendel) and pYES (for Coumaroyl group)

Operational sequence:

The yeast transformation was performed as described in the pYES2 manual of Invitrogen (see small scale yeast transformation), using an over night culture of INVSC1- yeast cells. The solutions 1xTE and 1xLiAc/40% PEG 3350/1xTE were made a few days before use.

Used amount of vector DNA:

p542: 4.8 µl
p551: 9 µl
pYES: 8.2 µl

At last, the cells were plated on appropriate agar- plates with SC -Ura medium and incubated at 30°C for the next three days. Colonies should be visible on friday.

Wednesday, September 5th

Transformation and Picking of tonight's ligation products (p648 + p642)

Investigator: Alois the HONK

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

Transformation of p647

Investigator: Martianus Capella, Nikolaus von Kues

Miniprep of E.Coli over night cultures, transformed with pYES2_RFC25 constructs

Investigator: Roman

Aim of experiment:

Isolation of plasmids: pYES2_RFC25_CaXMT1, pYES2_RFC25_CaMXMT1 and pYES2_RFC25_CaDXMT1 for further usage.

Operational sequence:

The plasmid preparation was done with the Quiagen Plasmid Miniprep Kit as previously described. Elution was performed with 40µl of elution buffer, heated up to 37°C. Before final centrifugation, the column was incubated for 2 minutes at 37°C.

Determined concentrations (NanoDrop)

pYES2_RFC25_CaXMT1 (p553): 179,6 ng/µl
pYES2_RFC25_CaMXMT1 (p554): 340,7 ng/µl
pYES2_RFC25_CaDXMT1 (p555): 182,9 ng/µl

Transformation of E. coli

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of ADH1+B1B_2, ADH1+B2A_3, ADH1+B3D_2.

Procedure:

20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.

Incubation at 37 °C overnight.

Cycled ligation of ADH1+B1B_1, ADH1+B3D_3

Investigator: Dennis

Aim of the experiment: Cycled ligation was performed for B1B_1 and B3D_3

Procedure:

Ligation batch for ADH1+B1B_1

volume	reagent
2,66 µl	ADH1 (16,6 ng/µl, 2048 bp)
1,8 µl	B1B_1 (91,4 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
12,5 ddH2O	=20 µl	TOTAL

Ligation batch for ADH1+B3D_3

volume	reagent
0,8 µl	ADH1 (16,6 ng/µl, 2048 bp)
1,9 µl	B3D_3 (28,7 ng/µl, 825 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
14 ddH20	=20 µl	TOTAL

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Transformation of E. coli XL1-Blue with ligation products P493+P639, P643+PP299, P640+P642, P641+P642

Investigator: Mary

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P493+P639, P643+PP299, P640+P642, P641+P642.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of the ligation products (P493+P639, P643+PP299, P640+P642, P641+P642) and their's negative controls (P493 NK, P643 NK, P640 NK, P641 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new chloramphenicol plates.

Incubation at 37 °C overnight.

Preparative digestion and gelelectrophoresis of P82

Investigator: Mary

Aim of the experiment: Digest P82 for further cloning experiments

Reaction batch for digestion of P82 with SpeI-HF+PstI-HF:

volume	reagent
20 µl	P82
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	PstI-HF (20 U/µl)
1 µl	Spe-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch was incubated at 37 °C for 2.5 h

4.44 µl of DNA loading buffer (10x) was added to the digested product and preperative gelelectrophoresis was performed at 70 V for 1.5 h.

Transformation of E. coli XL1-Blue with P664, P51, P52, P53

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P664 (KanR, AmpR), P51 (KanR, AmpR), P52 (KanR), P53 (KanR).

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

2 µl of the biobricks (P664, P51, P52, P53) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on kanamycin plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new kanamycin plates.

Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with BBa_K268000 (pSB6A0)

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with BBa_K268000 (pSB6A0), a empty hybrid yeast bacteria vector without promoter and terminator. For future cloning of expression cassettes.

Procedure:

4 colonies of the transformation with BBa_K268000 (pSB6A0) were taken.

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and ampicillin. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Preparation of SCU-medium containing galactose (induction medium)

Investigator: Katrin

Aim of the experiment:Preparation of induction medium for a 2 l expression experiment

for 1 liter:

dissolve 50 ml AS-Aliquot + 6.7g Yeast Nitrogen Base in 850 ml of water, then autoclave
dissolve 20 g galactose in 100 ml water
autoclave both solutions separately

4 liter of induction medium were made

Harvest proteins expressed in yeasts

Investigator: Katrin

Aim: Cell disruption for harvesting proteins expressed in yeasts (crude protein extract)

Procedure:

resuspending cell pellets in defined volume of breaking buffer + PMSF
adding glass beads
vortex for 30 seconds and incubate on ice for 30 seconds (repetition for 40 times)
centrifuge at 4 °C, full speed, 10 min
take supernatant and centrifuge at 4 °C, full speed, 10 min again
store supernatant at -80°C (second box)

a 5 ml aliquot of cells was harvested at 9:30 and a 10 ml aliquot was harvested at 12:30

Miniprep of PCR 42 (citrus limonene synthase with consensus sequence) in plasmid P133 (pSB1C3) and PCR 57 (lavendula limonene synthase from Prof. Schwab) in plasmid P133 (pSB1C3) (6 clones each)

Investigator: Katrin

Aim: Get more plasmid DNA (PCR42/pSB1C3, PCR 57/pSB1C3)

concentrations:

PCR57/P133 clone 1: 75,4 ng/µl
PCR57/P133 clone 2: 244,6 ng/µl
PCR57/P133 clone 3: 232,9 ng/µl
PCR57/P133 clone 4: 63 ng/µl
PCR57/P133 clone 5: 77,2 ng/µl
PCR57/P133 clone 6: 100,5 ng/µl
PCR42/P133 clone 1: 57 ng/µl
PCR42/P133 clone 2: 73,3 ng/µl
PCR42/P133 clone 3: 57,4 ng/µl
PCR42/P133 clone 4: 74,4 ng/µl
PCR42/P133 clone 5: 75,8 ng/µl
PCR42/P133 clone 6: 178,4 ng/µl

picking of clones for a 2 l expression experiment

Investigator: Katrin

Aim: picking of clones for a 2 l expression experiment 2 clones of S. cerevisiae containing citrus limonene synthase (mit consensus sequence) were picked from the plate Andrea 29 (22.08.) and resuspended in 100 ml SCU medium + glucose

Thursday, September 6th

Miniprep of E. coli XL-Blue cells, transformated with biobrick BBa_K268000 (emtpy yeast vector)

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with biobrick BBa_K268000 (emtpy yeast vector=without promoter and terminator).

Procedure:

Miniprep was done after manufacturer's protocol (P674-P677). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of P674-P677

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P674-P677 with XbaI+PstI-HF.

Procedure:

Reaction batch for P674-P677

volume	reagent
2.5 µl	Plasmid DNA (P674-P677)
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
0.25 µl	XbaI (20 U/µl) (NEB)
0.25 µl	PstI (20 U/µl) (NEB)
14.8 µl	ddH2O
=20 µl	TOTAL

Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.

2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.

10 µl of these were loaded in the gel pockets.

Analytical gelelectrophoresis was performed at 90 V for ~60 min.

1 kbp DNA ladder	P674	P675	P676	P677
	Biobricks still contain forbidden restriction sites!	Biobricks still contain forbidden restriction sites!	Biobricks still contain forbidden restriction sites!	Biobricks still contain forbidden restriction sites!

Transformation of E. coli XL1-Blue with P664

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with P664 (KanR and AmpR).

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

6 µl (because 2 µl on KanR plates didn't work)of the biobrick BBa_I712019 in pSB1AK8 (P664) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of the cell suspension were plated on ampicillin plate.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated again on new ampicillin plates.

Incubation at 37 °C overnight.

Picking of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642

Investigator: Jeff

Aim of the experiment: Picking of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642.

Procedure:

3 colonies of each transformation with were taken (4x3 colonies = 16 colonies).

Colonies were picked with pipette tips and transferred into a new cell-culture tube with 4 ml of LB-medium and chloramphenicol. These tubes were put overnight in a 180 rpm cell culture shaker at 37 °C.

Picking of pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term pSB1C3_TEF1Prom_Preprothaumatin (p647) and pYes2_Preprothaumatin

Investigator: Eriugena, Nietzsche

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

Preparation of SC-U medium with 2% glucose (4 l) and transfer of colonies into medium

Investigator: Andrea, Lara

Amino acid solution was prepared seperately (see pYES manual):

1 g Adenine, Arginine, Leucine, Threonine, Tryptophan
0.5 g Aspartic acid, Histidine, Isoleucine, Methionine, Phenylalanine, Proline, Serine, Tyrosine, Valine
1,49 g Cysteiniumchlorid, Lysindihydrochlorid
six aliquots were stored at the lowest drawer of -20°C.

Yeast nitrogen base was prepared separately (by Katrin):

6.7g Yeast nitrogen base in 850 ml ELGA water

4 l medium (in two 2 l flasks):

4 aliquots (50 ml) of amino acis prepared before were used
each 6.7 g yeast nitrogen base
each 850 ml ELGA water
after dissolving, the solution was autoclaved

Sugar solution was prepared separately (by Martin):

200g of glucose were dissolved in 1000 ml ELGA water
autoclaving

After autoclaving:

200 ml of glucose solution was added to a total of 2 l SC-U medium

--> transfer of pre-culture (100 ml, OD600=5) each into 2 L of SC-U medium

--> 4 µl of pre-culture was applied to a SC-U plate to keep clones for further use (incubation at 30°C, check tomorrow!)

Minipreparation of pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term pSB1C3_TEF1Prom_Preprothaumatin (p647) and pYes2_Preprothaumatin

Investigator: Eriugena, Nietzsche

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term: p665-p669.
pSB1C3_TEF1Prom_Preprothaumatin: p670-p671.
pYes2_Preprothaumatin: p672-p673.

Analytical digest and analytical gel electrophoresis of pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term

Investigator: Eriugena, Nietzsche, Dennis

Aim: Getting pSB1C3_TEF1Prom_Preprothaumatin_TEF1Term.

Digest 1:

5 µl p665-p669, 0.25 µl EcoR1, 0.25 µl Pst1, 0.2 µl BSA, 2 µl NEBuffer EcoR1, 12 µl ddH2O; 37°C, 1h.

Digest 2:

5 µl p665-p669, 0.5 µl Not1, 0.2 µl BSA, 2 µl NEBuffer 3, 12 µl ddH2O; 37°C, 1h.

Analytical gel electrophoresis: 1 kb marker, p665_1, p666_1, p667_1, p668_1, p669_1, p665_2, p666_2, p667_3, p668_4, p669_5.

Bild

Expected: backbone: 2.2 kb, insert: 1.7 kb.

Result:

On the left you see the digest with EcoRI and PstI. The bands show the desired length - the ligation was a historic triumph. The bands on the right show the same plasmids digested with NotI - as indicated by sequence data obtained bei Schorsch, the TefI-Terminator lost the NotI restriction site due to a punctual mutation.

Picking of colonies for miniprep

Investigator: Dennis

Aim: New miniprep for new transformation of E. coli with ligation batch B2A_3+ADH1 terminator and B1B_2+ ADH1 terminator and B3D_3+ ADH1 terminator

Picking of 3 clones each of ligation batch
Inbucation at 37°C (shaker) over night.

preperative Gelelectrophoresis

Investigator: Dennis

4.44 µl of DNA loading buffer (10x) was added to the digestion mix after incubation time.

Preperative gelelectrophoresis was perforemd at 90 V for 1 h.

1 kbp DNA ladder

pSB1C3_CaMXMT1 (clone B1B_1)

pSB1C3_CaMXMT1 (clone B3D_3)

all bands was cut out and purified via Gelextraction

Gelextraction

Investigator:Dennis

Gelextraction of B1B_1, B3D_3 was performed according to Quiaquick gel extraction protocol
following concentrations were detected by Nanodrop:
B1B_1 ==> 8,8 ng/µl
B3D_3 ==> 10,4 ng/µl

Transformation of E. coli

Investigator: Dennis

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products of ADH1 Terminator+B1B_1, ADH1 terminator+ B3D_3.

Procedure:

20 µl of each ligation products were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.

Incubation at 37 °C overnight.

Analytical restriction digest of plasmid prep of september 5th

Instructor: Katrin

PCR57/p133

File:TUM12 LS analytgel0609.jpg

PCR42/p133

File:TUM12 LS analytgel20609.jpg

--> ligations failed

Cell lysis of 5ml samples taken 20min after expression induction

Investigator: Roman

Aim of the experiment:

Cell lysis of yeast cell- samples taken 20 min after expression. The idea is to compare the gene expression 20min after induction and 20h after induction. The signals on the western blott should show, that the two bands of our expressed enzymes are only visible after 20h.

Operational sequence:

an adequate amount of breaking buffer (containing PMSF) was given to the frozen cell pellet, as well as an equal amount of glass beads. Note: because the supernatant could not be taken after 10 min centrifugation, another 30µl of breaking buffer were added.

cell- walls were disrupted by vortexing for 30 sec, followed by 30 sek on ice. This procedure was repeated 4 times.

protein concentration was determined by NanoDrop (blank: breaking buffer)

- CaXMT1 crude extract: 1 mg/ml
- CaMXMT1 crude extract: 2,23 mg/ml

SDS- Page of protein crude extracts, taken at different times after induction of expression

Investigator: Roman

Aim of the experiment:

Aim of the experiment is the preparation of a SDS- page, to make a subsequent western blot and to compare the samples, taken at different expression times.

Operational sequence:

The SDS- gel was prepared as previously described (12%). 20µg protein crude extract of each sample were loaded on the gel. Running- time: ca. 2h at 120V. Additionally to the prestained protein marker, we used an un- prestained marker, which contained a 45 kDa protein. Afterwards, the gel was immediately used for the western blot.

Western blot of samples of the expression of CaXMT1, CaMXMT1 and eGFP

Investigator: Saskia, Roman

Aim: Analysis of the expression of CaXMT1, CaMXMT1 and eGFP (positive controll)after SDS-PAGE (120V, 1.5 h)

Procedure: preparation of solutions: as described in the materials

PBS-T0.1
PBS-T0.1 with 3% BSA

Blotting:

blotting of proteins on ImmobilonP Membrane (activating in methanol for 10 min)
gel and membrane in transferbuffer for 20 min
50mA, 1 h

Blocking:

wash 3x7min with PBS-T0.1
the membrane is blocked over night in PBS-T0.1 with 3% BSA at 4 °C on a shaking device

Friday, September 7th

Miniprep of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642

Investigator: Jeff

Aim of the experiment: Miniprep of E. coli XL-Blue cells, transformated with ligation products P493+P639, P643+P299, P640+P642, P641+P642.

Procedure:

`* Miniprep was done after manufacturer's protocol (P686-P697). (QIAGEN - QIAprep Spin Miniprep Kit)

Analytical digestion and gelelectrophoresis of P686-P697

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P686-P697 with XbaI+PstI-HF.

Procedure:

Mastermix for digestion of P686-P697 with XbaI and PstI-HF:

volume	reagent
26 µl	NEBuffer 4 (10x)
2.6 µl	BSA (100x)
3.25 µl	XbaI (20 U/µl) (NEB)
3.25 µl	PstI (20 U/µl) (NEB)
192.4 µl	ddH2O
=227.5 µl	TOTAL

17.5 µl of the mastermix was added to 2.5 µl of plasmid DNA (P686-P697).

Analytical digestion reaction mix was incubated at 37 °C for 1.5 h.

2 µl of DNA loading buffer (10x) was added to the 20 µl of reaction mix after digestion.

10 µl of these were loaded in the gel pockets.

Analytical gelelectrophoresis was performed at 90 V for 60 min on a 0.5% agarose gel.

1 kbp DNA ladder	P686	P687	P688	P689	P690	P691
	Ligation was successful!	Ligation was successful!	Ligation was successful!	Ligation was successful!	Ligation was successful!	Ligation was successful!

1 kbp DNA ladder	P692	P693	P694	P695	P696	P697
	Ligation was successful!	Ligation was successful!	Ligation was successful!	Ligation was successful!	Ligation was successful!	Ligation was successful!

Preparative digestion of P687, P690, P693, P697

Investigator: Jeff

Aim of the experiment: Preparative digestion of P687 (SpeI-HF+PstI-HF), P690 (XbaI+PstI-HF), P693(XbaI+PstI-HF), P697(XbaI+PstI-HF).

Procedure:

Reaction batch for digestion of P687 with SpeI-HF+PstI-HF:

volume	reagent
20 µl	P687
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	Spe-HF (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch for digestion of P690 with XbaI+PstI-HF:

volume	reagent
20 µl	P690
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch for digestion of P693 with XbaI+PstI-HF:

volume	reagent
20 µl	P693
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch for digestion of P697 with XbaI+PstI-HF:

volume	reagent
20 µl	P697
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	PstI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

Reaction batch was incubated at 37 °C overnight.

Preparative restriction digest of PCR1/pYES (P515neu) and PCR58/pSB1C3 (P510)

Investigator: Andrea

Aim: Prepare PCR1 for ligation into pSB1C3

volume	reagent
20 µl	Plasmid
4 µl	NEBuffer 4 (10x)
0.4 µl	BSA (100x)
1 µl	XbaI (20 U/µl)
1 µl	AgeI-HF (20 U/µl)
13.6 µl	ddH2O
=40 µl	TOTAL

plasmids were digested at 37 °C for 3 hours.

Gelelectrophoresis:

Limonensynthase: 1600 bp

pSB1C3: 2000 bp

pYES: 5800 bp

Single colony streak of PCR2 in yeast

Investigator: Lara

Aim: Since we only had one colony of PCR2/pYES in yeast, we wanted to get more yeast colonies by picking a bit of this clone and smearing it onto a new SC-U plate. The plate was incubated at 30°C over night.

check plate tomorrow and store in fridge!

Miniprep of E.Coli over night cultures

Investigator: Dennis

Aim of experiment:

Isolation of plasmids: B2A_3+ADH1 terminator (1), B1B_2+ADH1 terminator (2), B3D_3+ADH1 (4) terminator for further usage.

Operational sequence:

The plasmid preparation was done with the Quiagen Plasmid Miniprep Kit as previously described. Elution was performed with 40µl of elution buffer, heated up to 37°C. Before final centrifugation, the column was incubated for 2 minutes at 37°C.

analytic digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator

Investigator: Dennis

Aim of the experiment: analytic digestion of clone === Preperative digestion of B2A, B1B, B3D ===

Investigator: Dennis

Aim of the experiment: preperative digestion of B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator

Procedure:

Reaction batch:

volume	reagent
5 µl	B2A_3+ADH1 terminator, B1B_2+ADH1 terminator, B3D_3+ADH1 terminator
2 µl	NEBuffer 4 (10x)
0,5 µl	EcorI (20 U/µl)
0,5 µl	PstI-HF (20 U/µl)
12 µl	ddH2O
=20 µl	TOTAL

Staining with Ponceau's reagent and western blot analysis of protein crude extract of CaXMT1, CaMXMT1 and eGFP transformants after 20 minutes and 20 hours of expression

Investigator: Saskia, Roman

Aim of the experiment:

Detection of expressed proteins CaXMT1, CaMXMT1, eGFP.

Operational sequence:

The western blot membran (having been blocked over the night at 4°C) was washed with PBS- T0.1 four times (4x 15min). Because of the use of un- prestained protein marker (see Thursday, 6.9.), we stained the western blot membran with Ponceau's reagent and assigned the bands, followed by washing the membran with PBS- T0.1 again (15 minutes, 2x). Afterwards, the membran was incubated for 1h with detection reagent. Detection reagent:

10ml 1xPBS
0,2% BSA (0,02g have been weighted in)
2µl anti body MABclassic

After incubating with the first antibody, the membran was washed again with PBS-T0.1 three times (3x 5min), followed by the incubation with the second antibody (anti mouse, fused with alk. phosphatase) for another our. Second detection reagent:

10ml 1xPBS
0,2% BSA (see above)
5µl AntiMouse-alk. Phosphatase conjugate (1/2000 dilution)

The development was performed after washing the membran with PBS- T0.1 for 10 min (two times) and with 1xPBS for 10 min (two times). For this, the membran was shortly washed with AP buffer and then incubated with a solution containing 15ml AP buffer, 45µl BCIP (50mg/ml in DMF) and 7,5µl NBT (75mg/ml in 70% DMF) for a few minutes, until clear bands appeared.

Western blot membran:

From left to right (with expression time in brackets):

Prestained protein marker (Page Ruler Plus)

CaXMT1 crude extract (20min)

CaMXMT1 crude extract (20min)

eGFP(20h)

CaMXMT1 crude extract (20h)

CaXMT1 crude extract (20h)

Unstained protein marker (pen marking)

Picture with annotations:

Preparing of controls for large-scale expression

Investigator: Lara

Aim: Prepare controls for analyzing background protein expression in yeast.

Control 1: S. cerevisiae without plasmid containing limonene synthase.

-> growth in 50 ml of SC (--> 0.005 g of uracil were put into 50 ml of SC-U (+Glucose) and filtered with a steril-filter)

Control 2: Transformed yeast (containing PCR1/pYES) without induction of expression

-> culture was transferred into fresh medium.

Transfer of yeast containing PCR/pYES into induction medium (+Gal)

Investigator: Andrea, Lara

Aim: Cultures that were grown in 2 L of SC-U (+Glu) were transferred into 2 L of SC-U (+Gal).

First, the OD was measured: OD=4
Approximately 300 ml of the culture was centrifuged and resuspended in induction medium
transfer into 2 L of induction medium

September, Saturday 8th

Preparative gelelectrophoresis of preparative digestion of P687, P690, P693, P697

Investigator: Jeff, Saskia

Aim of the experiment: Preparative gelelectrophoresis was performed from the samples from the preparative digestion overnight of P687 (SpeI-HF+PstI-HF), P690 (XbaI+PstI-HF), P693(XbaI+PstI-HF), P697(XbaI+PstI-HF).

Procedure:

4.44 µl of DNA loading buffer was added to the digestion mixture.

Preparative gelelectrophoresis was performed at 70 V for 3 h.

P687 SpeI + PstI-HF	1 kbp DNA ladder	P690 XbaI-HF + PstI-HF
Band was cut out (3316 bp, 75.5 ng/µl)		Lower band was cut out (988 bp, 30.4 ng/µl)

P693 XbaI-HF + PstI-HF	1 kbp DNA ladder	P697 XbaI-HF + PstI-HF
Upper band was cut out (3848 bp, 68.7 ng/µl)		Upper band was cut out (4013 bp, 69.8 ng/µl)

Transformation of E. coli XL1-Blue with BBa_I712019, BBa_E2020, BBa_E2030

Investigator: Saskia

Aim of the experiment: Transformation of E. coli XL1-Blue with BBa_I712019, BBa_E2020, BBa_E2030 (H10, 12D, 12B)

Procedure:

2µl of each ligation product were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

The cells were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellets were resuspended in 100 µl of LB-medium and plated on: H10 Ampicillin plates, 12D Kanamycin plates, 12B Kanamycin plates

Cycled ligation of P698+P699

Investigator: Saskia

Aim of the experiment: Cycled ligation of P698+P699 (TEF1 promoter - SV40NLS-Gal4AD-30aaLinker-Pif3(100NT) + TEF1 terminator - TEF1 promoter).

Procedure:

Ligation batch for P698+P699

volume	reagent
1.32 µl	P698 (75.5 ng/µl, 3316 bp)
1.19 µl	P699 (30.4 ng/µl, 988 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
14.49 µl	ddH2O
=20 µl	TOTAL

Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batch and was labeled as P698 NK.

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Analytical digestion and gelelectrophoresis of P676, P73, P81, P134

Investigator: Jeff

Aim of the experiment: Analytical digestion and gelelectrophoresis of P676 (pSB6A0 (BBa_K268000)), P73 (BBa_K207001 in pSB1A2), P81 (BBa_K207000 in pSB3K3), P134 (BBa_K165055 in BBa_J63009).

Procedure:

Reaction batch for digestion of P676 with EcoRI-HF and SpeI-HF:

volume	reagent
2.5 µl	Plasmid DNA (P676)
2 µl	NEBuffer 4 (10x)
0.2 µl	BSA (100x)
0.25 µl	EcoRI-HF (20 U/µl) (NEB)
0.25 µl	SpeI-HF (20 U/µl) (NEB)
14.8 µl	ddH2O
=60 µl	TOTAL

Mastermix for digestion of P676 (pSB6A0 (BBa_K268000)), P73 (BBa_K207001 in pSB1A2), P81 (BBa_K207000 in pSB3K3), P134 (BBa_K165055 in BBa_J63009):

volume	reagent
8 µl	NEBuffer 4 (10x)
0.8 µl	BSA (100x)
1 µl	XbaI (20 U/µl) (NEB)
1 µl	PstI (20 U/µl) (NEB)
49.2 µl	ddH2O
=60 µl	TOTAL

For digestion of P73, P81, P134 15 µl of the mastermix for XbaI+PstI-HF was added to 5 µl of plasmid DNA.

Analytical digestion mixes were incubated at 37 °C for 1.5 h.

2 µl of DNA loading buffer (10x) was added to each reaction batch.

10 µl of each sample was loaded into the gel pocket.

Analytical gelelectrophoresis was performed at 90 V for 1 h

1 kbp DNA ladder	P676(pSB6A0 (BBa_K268000))	P73 (BBa_K207001 in pSB1A2)	P81 (BBa_K207000 in pSB3K3)	P134 (BBa_K165055 in BBa_J63009)
	Bands like expected!	Corrupt!	Corrupt!	Corrupt!

Conclusion for P676 (=pSB6A0 (BBa_K268000)): This part contains at least one forbidden restriction site (XbaI or PstI, please see analytical gel from September, the 6th. But here, one can see that EcoRI and SpeI can nevertheless be used for cloning parts into pSB6A0

The other parts (P73 (BBa_K207001 in pSB1A2), P81 (BBa_K207000 in pSB3K3), P134 (BBa_K165055 in BBa_J63009)) are all completely wrong! Wrong size of bands and partially also the vector!

Ligation of citrus limonene synthase into pSB1C3 containing TEF1/TEF2 promoter

Investigator: Andrea

Aim: Ligate citrus limonene synthase into pSB1C3 behind TEF2 and TEF1 promoter.

Procedure

Citrus LS (p578) in pSB1C3 with TEF2 (p492)

Substance	Volume
P492 (TEF2/pSB1C3; digested with Spe+Pst)	1.52 µl
P578 (LS, digested with Xba+Pst)	6.48 µl
T4 ligase	1 µl
T4 ligase buffer	1 µl
TOTAL	=10 µl

Negative control water in P492

Substance	Volume
P492 (digested with Xba1+Age1)	1.52 µl
ddH2O	6.488 µl
T4 ligase	1 µl
T4 ligase buffer	1 µl
TOTAL	=10 µl

Citrus LS (p578) in pSB1C3 with TEF1 (p493)

Substance	Volume
P493 (TEF2/pSB1C3; digested with Spe+Pst)	2.05 µl
P578 (LS, digested with Xba+Pst)	5.95 µl
T4 ligase	1 µl
T4 ligase buffer	1 µl
TOTAL	=10 µl

Negative control water in P493

Substance	Volume
P493 (digested with Xba1+Age1)	2.05 µl
ddH2O	5.958 µl
T4 ligase	1 µl
T4 ligase buffer	1 µl
TOTAL	=10 µl

Citrus LS (PCR1, restriction digest on 7th September) in pSB1C3 (restriction digest 7th September)

Substance	Volume
pSB1C3 (digested with Xba1+Age1)	0.71 µl
LS (PCR1 digested with Xba1+Age1)	7.298 µl
T4 ligase	1 µl
T4 ligase buffer	1 µl
TOTAL	=10 µl

Negative control water in pSB1C3 (restriction digest 7th September)

Substance	Volume
pSB1C3 (digested with Xba1+Age1)	0.71 µl
ddH2O	7.298 µl
T4 ligase	1 µl
T4 ligase buffer	1 µl
TOTAL	=10 µl

Large-scale cell lysation

Investigator: Volker, Lara

Aim: Production of cell lysate (large-scale).

1. OD of cell cultures were measured:

clone 1: OD600=4.2
clone 2: OD600=2.8
control: clone 2 (uninduced) OD600=5,6 (medium: SC+Glu)
control: S. cer (not transformed) OD600=4,6 (medium:SC+uracil)

2. Cell cultures were centrifuged (large scale:25 min at 3000 rpm; controls: 10 min at 3000rpm) and the pellet was washed in breaking buffer (without PMSF).

200 ml BB for large-scale cultures
50 ml BB for controls

3. After centrifugation, pellets were resuspended in breaking buffer (with PMSF) to reach an OD of 70-100.

large-scale cultures(2L): 80 ml BB+PMSF
controls (50ml): 2,5 ml BB+PMSF

4. 1 volume of glass beads (0,5 mm) was added. In cool room: 20-40 cycles of vortexing (30 sec) and incubation (30 sec).

5. the supernatant was transferred to fresh tubes.

Suggestion for next time: Take a transformed yeast (induced) in small-scale as third control.

Production of Breaking buffer

Investigator: Lara, Andrea

For 1 L of 1 M sodium phosphate buffer:

prepare:

127,8 g Na2HPO4; add 900 ml of distilled water -> solution 1
24 g of NaH2PO4; add 200 ml of distilled water -> solution 2

mix 845 ml of solution 1 with 155 ml of solution 2 (you can measure the amount by weight scale)
adjust pH to pH=7.5 by adding more of solution 1 or solution 2
autoclave and store at room temperature

For PMSF solution:

has to be made each time, can not be stored due to short half time
0,0522 g PMSF; add 3 ml isopropanol

For breaking buffer with PMSF:

50 mM sodium phosphate buffer 1 mM EDTA 5 % glycerol 1 mM PMSF

Transformation of E. coli

Investigator: Saskia

Aim of the experiment: Transformation of E. coli XL1-Blue with the ligation products Lara 1,2,3 and NK492, NK493, NKpSB1C3

Procedure:

5µl of each ligation product were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension were plated on chloramphenicol plates.

The rest was centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and this concentrated cell suspension was plated again on chloramphenicol plates.

incubation over night (37°C)

Sunday, September 9th

Transformation of E. coli XL1-Blue with ligation products P698+P699 and biobricks BBa_J52008, BBa_E0020, BBa_E2060, BBa_E0026, BBa_E0036, BBa_E0040, BBa_E1010

Investigator: Jeff

Aim of the experiment: Transformation of E. coli XL1-Blue with ligation products P698+P699 and biobricks BBa_J52008 in pSB1AK3, BBa_E0020 in pSB1A2, BBa_E2060 in pSB2K3, BBa_E0026 in pSB1A2, BBa_E0036 in pSB1A2, BBa_E0040 in pSB1A2, BBa_E1010 in pSB2K3.

Procedure:

CaCl2 competent E. coli XL1-Blue cells were put out from the stock in -80 °C freezer and were gently thawed on ice.

5 µl of the ligation product (P698+P699) and it's negative control (P698 NK) were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice. 2 µl of the biobricks BBa_J52008 in pSB1AK3, BBa_E0020 in pSB1A2, BBa_E2060 in pSB2K3, BBa_E0026 in pSB1A2, BBa_E0036 in pSB1A2, BBa_E0040 in pSB1A2, BBa_E1010 in pSB2K3 were added to 100 µl of CaCl2 competent E. coli XL1-Blue cells on ice.

30 min incubation on ice.

5 min heat shock at 37 °C

Adding of 1 ml LB-medium to each tube.

Incubation for 45 min at 37 °C in the 180 rpm cell-culture shaker.

100 µl of those cell suspension (only ligation products!) were plated on chloramphenicol plates.

The rest (ligation products and biobricks) were centrifuged for 1 min at 13000 rpm and the supernatant was dicarded.

The pellet was resuspended in 100 µl of LB-medium and these concentrated cell suspensions was plated on suitable antibiotic plates.

Incubation at 37 °C overnight.

Cycled ligation of P698+P699

Investigator: Jeff

Aim of the experiment: Cycled ligation of P698+P699 (TEF1 promoter - SV40NLS-Gal4AD-30aaLinker-Pif3(100NT) + TEF1 terminator - TEF1 promoter).

Procedure:

Ligation batch for P698+P699

volume	reagent
1.32 µl	P698 (75.5 ng/µl, 3316 bp)
2.92 µl	P699 (30.4 ng/µl, 988 bp)
2 µl	T4 ligase buffer (10x)
1 µl	T4 ligase (1 U/µl)
12.76 µl	ddH2O
=20 µl	TOTAL

Negative control was als prepared. Instead of the insert, the same volume of ddH2O was added to the reaction batch and was labeled as P698 NK.

Cycled ligation has been performed after following protocol in a thermocycler:

100 cycles	12 °C	60 s
	22 °C	60 s
Hold	16 °C	infinite

Lid temperature = 37 °C

Team:TU Munich/Notebook/Labjournal

From 2012.igem.org

Labjournal

Week 1

Wednesday, June 13th

Exchange of the Multiple Cloning Site of pYES2

Thursday, June 14th

Exchange of the Multiple Cloning Site of pYES2

Transformation of plasmids from Prof. Schwab in E.coli XL-1 Blue

Friday, June 15th

Exchange of the Multiple Cloning Site of pYES2

Transformation of plasmids from Prof. Schwab into E.coli XL-1 Blue

Sunday, June 17th

Exchange of the Multiple Cloning Site of pYES2

Week 2

Monday, June 18th

Exchange of the Multiple Cloning Site of pYES2

Tuesday, June 19th

Transformation of BBa_I742111 (Limonenesynthase) into E.coli XL-1 Blue

Wednesday, June 20th

Exchange of the Multiple Cloning Site of pYES2

Transformation of BBa_I742111 (Limonenesynthase) into E.coli XL-1 Blue

Thursday, June 21st

Transformation of BBa_I742111 and plasmids from Prof. Schwab into E.coli XL-1 Blue

Friday, June 22nd

Transformation of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS

Saturday, June 23rd

Quick Change mutagenis to remove NgoMIV from pYES2

Sunday, June 24th

Miniprep of E.coli XL1-Blue with pKS2µHyg-PAL-4Cl-CHS

Quick Change mutagenis to remove NgoMIV from pYES2

Transformation of 2 Biobricks into E. coli XL1-Blue

Week 3

Monday, June 25th

Miniprep of E. coli XL1-Blue with pYes2_RFC25 MCS 1.2

Quick Change mutagenis to remove SpeI from pYES2_RFC25 MCS 1.2

Picking of E. coli cells on antibiotic selection plates: pSB1A2 plasmid with BBa_K105005 (LexA) and pSB2K3 plasmid BBa_I15008 (heme oxygenase)

Tuesday, June 26th

Quick Change mutagenis to remove SpeI from pYes2_RFC25 MCS

Verification of the PCR products P30, P31 and P33

Control of the competent cells and transformation with P20

PCR of PAL, 4CL, CHS, OMT (Coumaryl-CoA)

Miniprep and analytical gel of picked transformed overnight culture with pSB1A2 plasmid with BBa_K105005 (LexA) pSB2K3 plasmid BBa_I15008 (heme oxygenase)

Wednesday, June 27th

Repetition of analytic gel of 21st June

Friday, June 29th

Preparative digest of PCR-products of 4CL, CHS and OMT

Preparative Gelelectrophoresis of PCR-products of 4CL, CHS

Quick Change mutagenesis to remove PstI in URA3 from pYES2_RFC25 MCS 1.2

Saturday, June 30th

Quick Change mutagenis to remove PstI in the URA 3 gene from pYes2_RFC25 MCS

Sunday, July 1st

Quick Change mutagenis to remove PstI in the URA 3 gene from pYes2_RFC25 MCS

Quick Change mutagenesis to remove PstI in the 2µ ori from pYES2_RFC25 MCS

Week 4

Monday, July 2nd

Repetition of PCR of PAL

PCR of LexA with primers including the RFC25 pre- and suffix

Tuesday, July 3rd

Analytic gelelectrophoresis of cleaned up PCR product from LexA with primer containing RFC25 pre- and suffix

LS: Plating of Schwab expression stains #106 & #108 which contain lavendula limonene synthase

Quick Change mutagenis to remove PstI in the 2µ Ori from pYes2_RFC25 MCS

PCR of BBa_I742111 (Limonenesynthase) Clone 3 (Trafo 19.06.12)

Wednesday, July 4th

Quick Change mutagenis to remove PstI in the 2µ Ori from pYes2_RFC25 MCS

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pYES2_RFC25 MCS

Analytical Gelelektrophoresis of PCR-Products of PAL

Picking of clones of Schwab expression stains #106 & #108

Preparative Gelelectrophoresis of PCR-products of OMT

Thursday, July 5th

Preparation of plasmids containing lavendula LS

Restriction digest of Schwab plasmids

Analytical gel electrophoresis of digested Schwab plasmids

Analytical Gelelektrophoresis of plasmid pKS2µHyg-PAL-4Cl-CHS

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pYES2_RFC25 MCS

Minipreparation of biobricks BBa_J52028, BBa_E2030, BBa_E2020

Friday, July 6th

Quick Change mutagenis to insert Ala in front of the Strep - tag II in pYES2_RFC25 MCS

PCR of Schwab plasmid DNA to amplify gene for lavendula LS

Analytic Gel of PCR of Schwab plasmid DNA