From 2012.igem.org

Revision as of 12:47, 26 September 2012

• Home
• Team
  • The Team
  • Team Registration
• Project
  • 1. Introduction
  • 2. PnA System
  • 3. Virus-Like Particles
    • CCMV
    • HepB
    • Polerovirus Natural BioBrick
  • 4. Outside Modification
  • 5. Inside Modification
  • 6. Detection of VLPs
  • 7. Applications
  • 8. The Constructor
  • 9. Final Overview
• Human Practices
  • Human Practices Home
  • 1. Mini Symposium
  • 2. Visiting Secondary Schools
  • 3. Discovery Festival
    • Communication Science
  • 4. Stakeholders
  • 5. Munich CAS Conference
• Safety
  • Introduction
  • 1. General safety
  • 2. Virus-related safety
  • 3. Regulations
  • 4. Safety suggestions
  • 5. Safety of applications
• Modeling
  • Human Body Model
  • Tertiary folding prediction
  • VLP assembly model
• Attributions
• Parts
• Notebook
  • Journal
  • Protocols

---

Last year's project: Synchronized Oscillatory System

iGEM Home

Contact Us

Our Sponsors:

Inside Modifications

CCMV with coils on the inside

CCMV with a negative interior

Hepatitis B with a K-coil on the inside

Introduction

Since virus-like particles (VLPs) lack genetic content, they enclose an empty space. This space can be filled with proteins such as antibiotics, hormones, and all sorts of pharmaceuticals. Modifications on the inside of the VLPs can increase binding affinity to the loaded substance. The first modifications we pursue is adding the K-coil to the protein subunits at any location that is exposed on the inside of the VLP. In our case, this is either a fusion to the N-terminus or to the C-terminus. The coils will facilitate strong attachment to the substance which has to carry the opposite coil. The second modification we aim to make is a change in the interior's charge, which is another way to open up more options for loading our VLPs. Normally, the interior of a VLP is positively charged, facilitating interaction with negatively charged DNA/RNA molecules. By changing the amino acid sequence that is located on the interior of a VLP, the positive charge can be changed into a negative charge. A VLP with a negatively charged interior can be loaded with all sorts of positively charged molecules, such as polymeres, metals, etc.

Our aims:

Construct a Virus-Like Particle that has coils exposed on the inside.

Construct a Virus-Like Particle that has a negatively charged interior.

CCMV with coils on the inside

The Cowpea Chlorotic Mottle Virus (CCMV) VLP is one of the best candidates for drug delivery, since it is tolerant of high temperatures and stable at a certain pH range. Next to that, the wild-type CCMV VLP is not specific for mammalian cells in vivo. Because of the promising properties of the CCMV VLPs, we decided to place coiled-coils on the interior. Since the N-terminus of the CCMV coat protein is folded to the inside of the VLP, this was the logic place to attach the coil. Attachment of coiled-coils allows the fusion of a range of molecules, which are immobilized on the inside of the VLP [2].

Methods

The attachment of the K-coil to the N-terminus of the CCMV wt VLP subunits was carried out in 4 subsequent PCR steps. Unluckily, the primer of the first step was not designed correctly, resulting in a frameshift over the entire VLP, making this construct useless. We discovered this on the 18th of September, when receiving the sequencing results of a similar experiment the attachment of the PnA-system to the outside of the CCMV Δ26 mutant.

Figure 1: PCR procedure CCMV wt + K-coil

Results

The first two steps of the PCR reactions went well. Except for the negative positive control of the first PCR step due to a pipetting mistake. We did the second PCR step with the PCR product of sample I

Figure 2: PCR step I CCMV wt + K-coil

Figure 3: PCR step II CCMV wt + K-coil

The remaining 45µl of the sample I PCR product were cleaned with the help of a PCR purification kit. Subsequently the clean sample I was used as template for the PCR reaction of the 2nd step. Again the template was diluted 10 times, which was with respect to figure ... not necessary at all. Two distinct bands are visible in sample I and II. This time the positive control worked even better than our actual experiments. The third step was redundant due to the wrong primer design in step I.

The mistake of adding 136 bp's to the CCMV wt construct instead of 135 or 138 bp's with the 4 primers causes a serious frameshift resulting in a totally wrong translated protein (see figure 4)

Figure 3: PCR step II CCMV wt + K-coil

CCMV with a negative interior

One of the modifications that was performed on the CCMV VLP was to give the interior a negative charge. Whilst the wild-type CCMV VLP can not be loaded with positively charged substances, this modified version can [3]. One very interesting feature of these modified VLPs is that they can be loaded with positive ions like metals. Addition of iron ions to a solution containing these modified VLPs at a pH of 6.5 results in oxidative hydrolysis of the iron on the inside of the VLPs, creating paramagnetic iron oxide nanoparticles [3]. In figure 1 a schematic overview of such a particle can be seen.

Figure 4: Schematic overview of an iron oxide nanoparticle within the CCMV coat protein

Figure 4: Alignment of a Wild-ype CCMV subunit with a modified CCMV subunit that has a negatively charged N-terminus (N-terminus can be seen in the bottom left).

Methods

Constructing a CCMV VLP with a negative charge was facilitated by 3 subsequent PCR steps, see figure 2 Luckily. This construct was finished in august and we were able to place an IPTG promoter combined with an RBS site in front of it.

Figure 5: Three subsequent PCR steps.

Results

The next step was to produce VLPs with this new construct, which succeeded. In figure 2 a highly magnified image is shown of such a VLP with a negative interior.

Figure 6: Electron Microscopy image of a CCMV VLP with negative interior. Magnification: 40.000

As a proof of concept, the CCMV VLPs with a negative interior were loaded with iron ions and monitored using electron microscopy. Unluckily, the samples were highly contaminated, which made it impossible to pinpoint any present VLPs. This contamination was possibly cause by the addition of iron to the samples. In figure 2 an image is shown of such a sample in which there is lots of contamination.

Figure 7: Electron Microscopy image with lots of contamination, possibly caused by the addition of iron. The structure shown here was repeatedly present all over the sample. Magnification: 20.000

Hepatitis B with a K-coil on the inside

Figure 8: Estimated position of a core protein fused to a K coil (pink) overlaid on top of the wild type protein (blue) in the Hepatitis B capsule

Deletions as well as modifications to the C-terminal of the Hepatitis B core protein are possible since this part of the protein is not important for VLP formation [1]. Knowing this we can assume that the fusion of a K-coil to the C-terminal will lead to the formation of a VLP with a coil presented on the inside.

To obtain the maximal amount of space in the VLP capsule we decided to delete a part of the C-terminal that is normally used for DNA binding and not required for VLP folding. After looking at protein folding predictions it was decided to add a short flexible linker between coil and core protein instead.

Methods

This modification was carried out in 4 PCR steps extending our construct one step at a time.

Figure 9: Legend

Figure 10: Primers for the 4 PCR reactions

Figure 11: PCR steps to obtain the fusion of linker and coil

Figure 12: Final step of the PCR reactions - the gel shows fragments with the expected size

Results

After some problems with the last step of the PCR reaction a product with the correct length was obtained (see journal week18). Unfortunately the ligation into a vector and transformation with E. coli did not succeed yet.

References

1. Beterams, G., Böttcher B., & Nassal M. (15. Sept 2000). Packaging of up to 240 subunits of a 17 kDa nuclease into the interior of recombinant hepatitis B virus capsids. FEBS Lett., S. 169-76.

2. Minten, I.J., et al., Controlled encapsulation of multiple proteins in virus capsids. J Am Chem Soc, 2009. 131(49): p. 17771-3.

3. Douglas, T., et al., Protein Engineering of a Viral Cage for Constrained Nanomaterials Synthesis. Adv. Mater., 2002. 14, No. 6. March 18. p. 415-18.