Team:Wageningen UR/Protocol/FPLC

From 2012.igem.org

(Difference between revisions)
(→washing column)
(→FPLC user manual)
Line 12: Line 12:
<li>Set flow rate on half the maximum the column can handle</li>
<li>Set flow rate on half the maximum the column can handle</li>
<li>Run the FPLC for about 2 times the column volume</li>
<li>Run the FPLC for about 2 times the column volume</li>
 +
<li>Empty waste bin</li>
</ol>
</ol>
Line 40: Line 41:
<li>Set flow rate on half the maximum the column can handle</li>
<li>Set flow rate on half the maximum the column can handle</li>
<li>Run the FPLC for about 1 times the loop volume</li>
<li>Run the FPLC for about 1 times the loop volume</li>
 +
<li>Turn on the Frac 900, to collect the samples</li>
</ol>
</ol>
== washing column ==
== washing column ==
<ol>
<ol>
 +
<li>Set flow rate on 0</li>
 +
<li>Empty waste bin</li>
 +
<li>Set loop valve on Load Position</li>
 +
<li>Set column valve on designated position</li>
 +
<li>Set on the pressure alarm: 5mPa</li>
 +
<li>Set flow rate on half the maximum the column can handle</li>
 +
<li>Run the FPLC for about 2 times the column volume</li>
 +
<li>Empty waste bin</li>
</ol>
</ol>

Revision as of 07:38, 11 September 2012

Contents

FPLC user manual

washing column

  1. Empty waste bin
  2. Set loop valve on Load Position
  3. Set column valve on designated position
  4. Set on the pressure alarm: 5mPa
  5. Set flow rate on half the maximum the column can handle
  6. Run the FPLC for about 2 times the column volume
  7. Empty waste bin

washing loop

  1. Set flow rate on 0
  2. Set loop valve on Inject Position
  3. Set column valve on Bypass position
  4. Set on the pressure alarm: 5mPa
  5. Set flow rate on half the maximum the column can handle
  6. Run the FPLC for about 2 times the loop volume

loading sample

  1. Set flow rate on 0
  2. Set loop valve on Load Position
  3. Inject the sample into the loop with an syringe
  4. Keep the syringe in the machine

injecting sample onto the column

  1. Set flow rate on 0
  2. Set loop valve on Inject Position
  3. Set column valve on designated position
  4. Set on the pressure alarm: 5mPa
  5. Set flow rate on half the maximum the column can handle
  6. Run the FPLC for about 1 times the loop volume
  7. Turn on the Frac 900, to collect the samples

washing column

  1. Set flow rate on 0
  2. Empty waste bin
  3. Set loop valve on Load Position
  4. Set column valve on designated position
  5. Set on the pressure alarm: 5mPa
  6. Set flow rate on half the maximum the column can handle
  7. Run the FPLC for about 2 times the column volume
  8. Empty waste bin
Retrieved from "http://2012.igem.org/Team:Wageningen_UR/Protocol/FPLC"