Team:TU Munich/Project/Brewing

From 2012.igem.org

(Difference between revisions)
(Description of a general brew)
Line 1: Line 1:
{{Team:TU_Munich/Header}}
{{Team:TU_Munich/Header}}
 +
 +
{{Team:TU_Munich/Excol}}
=Brewing=
=Brewing=
Line 10: Line 12:
-
=Description of a general brew=
+
==Description of a general brew==
 +
----
Bruised grain is put in 50 °C hot water; this temperature is kept for 40 minutes. Then the temperature is raised to 64 °C, this temperature is steady for 30 minutes, after that it is raised to 72 °C for another half an hour. Now the progress is controlled by an Iodine test. It is tested if the starch is completely decomposed to sugar. When the sample does not turn violet everything is okay.
Bruised grain is put in 50 °C hot water; this temperature is kept for 40 minutes. Then the temperature is raised to 64 °C, this temperature is steady for 30 minutes, after that it is raised to 72 °C for another half an hour. Now the progress is controlled by an Iodine test. It is tested if the starch is completely decomposed to sugar. When the sample does not turn violet everything is okay.
Line 17: Line 20:
Next is another filtration into the final bucket, this has to be sterilized before. This bucket is closed and put into a cold room. When the temperature has fallen to 24 °Celsius or less, the yeast is added, a special covering put on the bucket (it has a whole for the CO2) and the bucket is left alone for 6 days at a temperature of 21 °C.
Next is another filtration into the final bucket, this has to be sterilized before. This bucket is closed and put into a cold room. When the temperature has fallen to 24 °Celsius or less, the yeast is added, a special covering put on the bucket (it has a whole for the CO2) and the bucket is left alone for 6 days at a temperature of 21 °C.
-
=Expriments on brewing=
+
==Results==
 +
----
-
==Experiment 1: Survival and growth of different yeast strains under various conditions==
+
===Experiment 1: Survival and growth of different yeast strains under various conditions===
 +
<div>
-
<br>
 
-
==Experiment 2: Toxic concentration of the substances to be produced==
+
</div>
 +
===Experiment 2: Toxic concentration of the substances to be produced===
 +
<div>
-
<br>
 
-
==Experiment3: Experiments with expression cassetts on a transient transfected vector==
+
</div>
 +
===Experiment 3: Experiments with expression cassetts on a transient transfected vector===
 +
<div>
-
<br>
 
-
==Experiment4:  Expression cassetts stabely integrated in the genome==
+
</div>
-
<hr/>
+
===Experiment 4:  Expression cassetts stabely integrated in the genome===
-
<hr/>
+
<div>
 +
 
 +
 
 +
</div>
-
= References =
+
== References ==
 +
----

Revision as of 21:27, 23 September 2012


Template:Team:TU Munich/Excol

Contents

Brewing


Description idea.

  • Does our laboratory streain of yeast survive the conditions of "the brewing-media"
  • Are the substances that shall be produced by the yeast toxic and where is the toxic concentration.
  • Try a brew with yeast having the expression cassetts on transient transfected vector.
  • Try a brew with yeast having the expression cassetts stabely integrated in the genome.


Description of a general brew


Bruised grain is put in 50 °C hot water; this temperature is kept for 40 minutes. Then the temperature is raised to 64 °C, this temperature is steady for 30 minutes, after that it is raised to 72 °C for another half an hour. Now the progress is controlled by an Iodine test. It is tested if the starch is completely decomposed to sugar. When the sample does not turn violet everything is okay.

The next step is to raise to 76 °C, after one hour the mash ready and is then removed from the pot, and filtered. The fluid is put into the cleaned pot again and slowly heated up to 100 °C after 10 minutes the hop is added. This is now the Gyle, which boils now for about an hour.

Next is another filtration into the final bucket, this has to be sterilized before. This bucket is closed and put into a cold room. When the temperature has fallen to 24 °Celsius or less, the yeast is added, a special covering put on the bucket (it has a whole for the CO2) and the bucket is left alone for 6 days at a temperature of 21 °C.

Results


Experiment 1: Survival and growth of different yeast strains under various conditions


Experiment 2: Toxic concentration of the substances to be produced


Experiment 3: Experiments with expression cassetts on a transient transfected vector


Experiment 4: Expression cassetts stabely integrated in the genome


References