Team:Wageningen UR/Protocol/FPLC

From 2012.igem.org

(Difference between revisions)
Line 2: Line 2:
= FPLC user manual =
= FPLC user manual =
 +
 +
 +
== washing column ==
 +
<ol>
 +
<li>Empty waste bin<li>
 +
<li>Set loop valve on Load Position</li>
 +
<li>Set column valve on designated position</li>
 +
<li>Set on the pressure alarm: 5mPa</li>
 +
<li>Set flow rate on half the maximum the column can handle</li>
 +
<li>Run the FPLC for about 2 times the column volume</li>
 +
</ol>
 +
 +
== washing loop ==
 +
<ol>
 +
<li>Set flow rate on 0</li>
 +
<li>Set loop valve on Inject Position</li>
 +
<li>Set column valve on Bypass position</li>
 +
<li>Set on the pressure alarm: 5mPa</li>
 +
<li>Set flow rate on half the maximum the column can handle</li>
 +
<li>Run the FPLC for about 2 times the loop volume</li>
 +
</ol>
 +
 +
== loading sample ==
 +
<ol>
 +
<li>Set flow rate on 0</li>
 +
<li>Set loop valve on Load Position
 +
<li>Inject the sample into the loop with an syringe
 +
<li>Keep the syringe in the machine
 +
</ol>
 +
 +
== injecting sample onto the column ==
 +
<ol>
 +
<li>Set flow rate on 0</li>
 +
<li>Set loop valve on Inject Position</li>
 +
<li>Set column valve on designated position</li>
 +
<li>Set on the pressure alarm: 5mPa</li>
 +
<li>Set flow rate on half the maximum the column can handle</li>
 +
<li>Run the FPLC for about 1 times the loop volume</li>
 +
</ol>
 +
 +
== washing column ==
 +
<ol>
 +
</ol>

Revision as of 07:27, 11 September 2012

Contents

FPLC user manual

washing column

  1. Empty waste bin
  3. Set loop valve on Load Position
  4. Set column valve on designated position
  5. Set on the pressure alarm: 5mPa
  6. Set flow rate on half the maximum the column can handle
  7. Run the FPLC for about 2 times the column volume

washing loop

  1. Set flow rate on 0
  2. Set loop valve on Inject Position
  3. Set column valve on Bypass position
  4. Set on the pressure alarm: 5mPa
  5. Set flow rate on half the maximum the column can handle
  6. Run the FPLC for about 2 times the loop volume

loading sample

  1. Set flow rate on 0
  2. Set loop valve on Load Position
  3. Inject the sample into the loop with an syringe
  4. Keep the syringe in the machine

injecting sample onto the column

  1. Set flow rate on 0
  2. Set loop valve on Inject Position
  3. Set column valve on designated position
  4. Set on the pressure alarm: 5mPa
  5. Set flow rate on half the maximum the column can handle
  6. Run the FPLC for about 1 times the loop volume

washing column

Retrieved from "http://2012.igem.org/Team:Wageningen_UR/Protocol/FPLC"