Team:Marburg SYNMIKRO/Results

Biobricks:

[http://partsregistry.org/Part:BBa_K866000 BBa_K866000] (CFP-Fusion Brick):

In order to evaluate putative recombination events in E. coli, we decided to generate fluorescent fusion proteins, which localize at different compartments within a cell. [http://partsregistry.org/Part:BBa_E0020 BBa_E0020] is a biobrick coding for the Cyan Fluorescent Protein (CFP). To make CFP suitable for fusion proteins, we used this biobrick as a template to create a CFP coding sequence (CDS) which can be cloned in-frame to other protein coding sequences via [http://partsregistry.org/Assembly:Standard_assembly Standard Assembly].

Our novel CFP-fusion brick was constructed by site directed mutagenesis through polymerase chain reaction (PCR) using primer MS_16 and MS_17. PCR products were separated by agarose gel electrophoresis, extracted from the gel and cloned into [http://partsregistry.org/Part:pSB1C3 pSB1C3] via [http://partsregistry.org/Help:Standards/Assembly/RFC10 Standard Assembly]. Positive clones were verified by colony PCR and [http://partsregistry.org/cgi/partsdb/dna.cgi?part_name=BBa_K866000 sequencing]. The CFP fusion brick was verified by expression and localization in E. coli as fusion protein with different intracellular localization domains (A-modules) GroES and AmiC using fluorescence microscopy.

[http://partsregistry.org/Part:BBa_K866001 BBa_K866001] (mRFP-Fusion Brick):

In addition to the CFP-fusion protein, fusion-competent monomeric Red Fluorescent Protein (mRFP) was contructed from [http://partsregistry.org/Part:BBa_E1010 BBa_E1010] as template. Site directed mutagenesis was performed via PCR using primer MS14 and MS15. PCR products were separated by agarose gel electrophoresis, extracted from the gel and cloned into [http://partsregistry.org/Part:pSB1C3 pSB1C3] via [http://partsregistry.org/Help:Standards/Assembly/RFC10 Standard Assembly]. Positive clones have been verified by colony PCR and [http://partsregistry.org/cgi/partsdb/dna.cgi?part_name=BBa%20K866001 DNA sequencing].

[http://partsregistry.org/Part:BBa_K866002 BBa_K866002] (Gin DNA Invertase):

The G-segment Invertase (Gin) from phage Mu is a site-specific DNA recombinase, which causes inversion of gene segments flanked by gix sites as inverted repeats. If the gene segment is flanked by gix-sites as direct repeats Gin recombinase causes deletions of the gene segment. Efficient recombination depends on a short DNA-segment which acts as recombinational Enhancer. To facilitate expression of Gin the biobrick contains a ribosomal binding site (RBS) attached upstream of the Gin start codon.

We designed primer MS11 and MS12 to fuse the well characterized and strong RBS [http://partsregistry.org/Part:BBa_J61100 BBa_J61100] from the Anderson RBS-family during amplification of the Gin coding sequence. As template for PCR, chromosomal DNA from E. coli strain C600 Mucts62 (lysogenic for temperature sensitive phage Mu cts62) was used. PCR amplicons were separated via agarose gel electrophoresis and cloned into [http://partsregistry.org/Part:pSB1C3 pSB1C3] through [http://partsregistry.org/Help:Standards/Assembly/RFC10 Standard Assembly]. Positive clones were evaluated by restriction enzyme digest and [http://partsregistry.org/cgi/partsdb/dna.cgi?part_name=BBa%20K866002 DNA sequencing]. The [http://partsregistry.org/Part:BBa_K866002 Gin DNA Invertase Biobrick] can be used with promoters of different strength in order to evaluate the optimal level of Gin-expression to stimulate recombination events in E. coli.

[http://partsregistry.org/Part:BBa_K866003 BBa_K866003] (SacB Suicide Gene):

To allow counter-selection against non-recombined plasmids, the suicide gene sacB was chosen. In the presence of sucrose in the medium, expression of the Bacillus subtilis sacB gene is toxic for gram negative E. coli cells. sacB codes for the enzyme levansucrase, which uses sucrose to produce the polymeric levan (2,6-β-D-fructosyl)_n in the periplasm, which disturbs cell metabolism and growth, leading to cell death. In our final recombination construct, sacB will be located between the A and B-modules. Successful recombination will cause deletion of the suicide gene and thus cells that contain plasmids with positive recombination events can be selected on sucrose containing media. The sacB gene was amplified using primer MS26 and MS27 from the suicide plasmid pNTPS (kindly provided by K. Thormann, MPI Marburg) via PCR. PCR products were separated by agarose gel electrophoresis, extracted from the gel and cloned into [http://partsregistry.org/Part:pSB1C3 pSB1C3] via [http://partsregistry.org/Help:Standards/Assembly/RFC10 Standard Assembly]. Positive clones were verified by restriction enzyme digest and [http://partsregistry.org/cgi/partsdb/dna.cgi?part_name=BBa%20K866003 DNA sequencing]. [http://partsregistry.org/Part:BBa_K866003 BBa_K866003] can be fused to promoters of different strength and tested for optimal screening through cell death on sucrose containing media.

Experiments:

Generation of test constructs:

As a first step towards our complete recombination construct, we aimed at generating the putative recombination gene products i.e. the fusion of a complete A-module with a complete B-module with a gix-site in between. These putative recombination constructs would be the outcome if a recombination event would have occurred in the complete recombination construct. For this purpose, all three complete A-Modules, HU, GroES and AmiC have been synthesized. These A Modules consist each of one localization domain (AmiC, GroES or HU) with the RBS [http://partsregistry.org/Part:BBa_J61100 BBa_J61100] and the strong constitutive promotor [http://partsregistry.org/Part:BBa_J23108 BBa_J23108] located upstream. Downstream of localization domains, a gix site is located. Between promotor, RBS, localization domain and the gix site, the [http://partsregistry.org/Help:Standards/Assembly/RFC10 scar sequence] from the standard assembly was included in order to test for the correct reading frame for expression. The complete A-modules are flanked by the standard prefix and suffix.

The complete A-modules coding for AmiC and GroES were cloned N-terminally to our fluorescent fusion protein sequences [http://partsregistry.org/Part:BBa_K866000 BBa_K866000] (CFP-Fusion Brick), [http://partsregistry.org/Part:BBa_K866001 BBa_K866001] (mRFP-Fusion brick as well as the biobrick [http://partsregistry.org/Part:BBa_K125500 BBa_K125500] (GFP-Fusion Brick) via standard assembly. Verification of fluorescence was performed via fluorescence microscopy.

Fluorescence microscopy:

In order screen for fluorescent E. coli harbouring our putative test constructs, positively selected colonies through antibiotic restistance have been subjected to fluorescence microscopy. For this purpose, colonies growing on LB-Agar supplemented with antibiotics for [http://partsregistry.org/Part:BBa_K866000 BBa_K866000] (CFP-Fusion Brick), [http://partsregistry.org/Part:BBa_K866001 BBa_K866001] (mRFP-Fusion brick) and [http://partsregistry.org/Part:BBa_K125500 BBa_K125500] (GFP-Fusion Brick), respectively, were cultured over-night in LB-medium with appropriate antibiotics. Small aliquots (10 µL) of overnight cultures were added onto 2% agarose-pads casted on microscope slides, covered by cover-slips and used for fluorescence microscopy.

Altogether, 6 different constructs have been observed for fluorescence, being AmiC-GFP, AmiC-CFP, AmiC-mRFP, GroES-GFP, GroES-CFP and GroES-mRFP. As visible in figure 1, fluorescence occurs in cells carrying each construct. Especially in cells expressing GroES-GFP and AmiC-GFP (fig. 1 E and B, respectively), intense fluorescence is detectable at cell poles for GroES and in the periplasm for AmiC in contrast to other cell compartments. Similar effects are also visible for GroES-mRFP and AmiC-mRFP, respectively (see fig. 1 D and A). For GroES-CFP and AmiC-CFP (fig. 1 F and C), fluorescence is detectable, yet for AmiC-CFP no precise localization can be determined.

As a result, our test constructs representing a putative recombination event of our planned recombination construct are expressed in E.coli. Furthermore, GFP- and mRFP fused A-modules show enhanced fluorescence at expected cell compartments, being cell poles for GroES and periplasm for AmiC.

Fig. 1: Fluorescent E. coli cells harbouring the fusion constructs of A- and B-modules. A: AmiC-mRFP. B: AmiC-GFP. C: AmiC-CFP. D: GroES-mRFP. E: GroES-GFP. F: GroES-CFP. G: E. coli harbouring a Promotor-RBS construct which serves as a non-fluorescent control. All images were taken via fluorescence microscopy at a magnification of x100.