Team:Cambridge/Diary/TheFinalMonth

From 2012.igem.org

(Difference between revisions)
(Our final month of work on Sporduino)
Line 29: Line 29:
So, unsurprisingly, given that we have been lauched into term time at the same time as finishing off our project, not as much work has been done as would necessarilly be desired.  
So, unsurprisingly, given that we have been lauched into term time at the same time as finishing off our project, not as much work has been done as would necessarilly be desired.  
-
=More BioBricks!=
+
==More BioBricks!==
Two more biobricks (the fluoride riboswitch and ratiometrica) have successfully been produced, and will hopefully be submitted to the registry ASAP. On the subject of ratiometrica, we have attempted some more plate reader assays - alas, M9 fails to grow cells with any competency. Or else we are just incompetent at making M9. In any case, the data that we had before the European jamboree remains our most useful. Attempts to insert the fluoride riboswitch into ratiometrica have also failed, possibly due to the tiny size of the riboswitch insert.
Two more biobricks (the fluoride riboswitch and ratiometrica) have successfully been produced, and will hopefully be submitted to the registry ASAP. On the subject of ratiometrica, we have attempted some more plate reader assays - alas, M9 fails to grow cells with any competency. Or else we are just incompetent at making M9. In any case, the data that we had before the European jamboree remains our most useful. Attempts to insert the fluoride riboswitch into ratiometrica have also failed, possibly due to the tiny size of the riboswitch insert.
-
=Luciferase development=
+
==Luciferase development==
We have, however, managed to get some data regarding our luciferase construct from DNA2.0. Matthew Hawkeye from the nanophotonics department of the University has kindly helped Tom to determine the emission spectrum of the construct, both induced and uninduced. Alas No. 2, we were unable to replicate the results of the original paper which demonstrated a spectral shift upon the addition of mOrange. Toxicity appears to have increased in the presence of IPTG, which could be stretched to a positive finding (it would appear to indicate that we are producing considerably greater quantities of the LUXA - mOrange fusion than under normal conditions, which puts the metabolism of the cell under considerable strain). We would be hard pressed to consider this an optimal result, however.
We have, however, managed to get some data regarding our luciferase construct from DNA2.0. Matthew Hawkeye from the nanophotonics department of the University has kindly helped Tom to determine the emission spectrum of the construct, both induced and uninduced. Alas No. 2, we were unable to replicate the results of the original paper which demonstrated a spectral shift upon the addition of mOrange. Toxicity appears to have increased in the presence of IPTG, which could be stretched to a positive finding (it would appear to indicate that we are producing considerably greater quantities of the LUXA - mOrange fusion than under normal conditions, which puts the metabolism of the cell under considerable strain). We would be hard pressed to consider this an optimal result, however.
-
=Konrad Seigfried Interview=
+
==Konrad Seigfried Interview==
Interestingly, <html><u><a href="https://2012.igem.org/Team:Cambridge/HumanPractices/Interview" style="color:#000066">Konrad Seigfried</a></u></html> got back in touch with us. He was hoping to form a collaborative effort in producing an EU project proposal involving the use of biosensors in general - and with our fluoride biosensor prototype in particular! Unfortunately, we were unable help in any but the most superficial way - we sent him our data concerning the various characterization experiments that we had performed. Alas No. 3, there simply wasn't the time (or the lab based resources) to collaborate any further.
Interestingly, <html><u><a href="https://2012.igem.org/Team:Cambridge/HumanPractices/Interview" style="color:#000066">Konrad Seigfried</a></u></html> got back in touch with us. He was hoping to form a collaborative effort in producing an EU project proposal involving the use of biosensors in general - and with our fluoride biosensor prototype in particular! Unfortunately, we were unable help in any but the most superficial way - we sent him our data concerning the various characterization experiments that we had performed. Alas No. 3, there simply wasn't the time (or the lab based resources) to collaborate any further.
-
=Collaboration=
+
==Collaboration==
We have been talking closely with this year's deserving Europe regional winner, [https://2012.igem.org/Team:Groningen Groningen]. Both our projects have a large Bacillus-spores aspect to them.
We have been talking closely with this year's deserving Europe regional winner, [https://2012.igem.org/Team:Groningen Groningen]. Both our projects have a large Bacillus-spores aspect to them.

Revision as of 03:33, 27 October 2012

Parts for a reliable and field ready biosensing platform

Implementation of biosensors in real world situations has been made difficult by the unpredictable and non-quantified outputs of existing solutions, as well as a lack of appropriate storage, distribution and utilization systems. This leaves a large gap between a simple, functional sensing mechanism and a fully realised product that can be used in the field. We aim to bridge this gap at all points by developing a standardised ratiometric luciferase output in a Bacillus chassis. This output can be linked up with prototyped instrumentation and software for obtaining reliable quantified results. Additionally, we have reduced the specialized requirements for the storage and distribution of our bacteria by using Bacillus' sporulation system. To improve the performance of our biosensing platform we have genetically modified Bacillus’ germination speed. Lastly, we demonstrated the robustness of our system by testing it with a new fluoride riboswitch, providing the opportunity to tackle real life problems.

One minute tour! :)

>> Return to page
>> Return to page


Contents

Judging Form

  • Please help the judges by filling out this form. Tell them what medal you think you deserve and why. Tell them which special prizes you should win. Help them find your best parts. Show them how you thought about the safety of your project. Helping the judges will help you too.

  • Team: Cambridge
  • Region: Europe
  • iGEM Year:2012
  • Track:Foundational Advance
  • Project Name:Parts for a reliable and field ready biosensing platform
  • Project Abstract: Implementation of biosensors in real world situations has been made difficult by the unpredictable and non-quantified outputs of existing solutions, as well as a lack of appropriate storage, distribution and utilization systems. This leaves a large gap between a simple, functional sensing mechanism and a fully realised product that can be used in the field.

    We aim to bridge this gap at all points by developing a standardised ratiometric luciferase output in a Bacillus chassis. This output can be linked up with prototyped instrumentation and software for obtaining reliable quantified results. Additionally, we have reduced the specialized requirements for the storage and distribution of our bacteria by using Bacillus' sporulation system. To improve the performance of our biosensing platform we have genetically modified Bacillus’ germination speed. Lastly, we demonstrated the robustness of our system by testing it with a new fluoride riboswitch, providing the opportunity to tackle real life problems.

Back to wiki


iGEM Medals for non-software teams

  • We believe our team deserves the following medal:
    • Bronze
    • Silver
    • √Gold

Because we met the following criteria (check all that apply and provide details where needed)

Requirements for a Bronze Medal

  • √Register the team, have a great summer, and plan to have fun at the Regional Jamboree.
  • √Successfully complete and submit this iGEM 2012 Judging form.
  • √Create and share a Description of the team's project using the iGEM wiki and the team's parts using the Registry of Standard Biological Parts.
  • √Plan to present a Poster and Talk at the iGEM Jamboree.
  • √Enter information detailing at least one new standard BioBrick Part or Device in the Registry of Standard Biological Parts. Including:
    • √Primary nucleaic acid sequence
    • √Description of function
    • √Authorship
    • Safety notes, if relevant.
    • √Acknowedgment of sources and references
  • √Submit DNA for at least one new BioBrick Part or Device to the Registry.

Additional Requirements for a Silver Medal

  • √Demonstrate that at least one new BioBrick Part or Device of your own design and construction works as expected; characterize the operation of your new part/device.
  • √Enter this information and other documentation on the part's 'Main Page' section of the Registry
    Part Number(s): [http://partsregistry.org/Part:BBa_K911004 BBa_K911004]

Additional Requirements for a Gold Medal: (one OR more)

Back to wiki

iGEM Prizes

All teams are eligible for special prizes at the Jamborees. more... To help the judges, please indicate if you feel you should be evaluated for any of the following special prizes:

  • √Best Human Practice Advance
  • √Best Experimental Measurement
  • Best Model

Please explain briefly why you should receive any of these special prizes:

Best Human Practice Advance:

We feel that we deserve this prize for three reasons:

  1. We explored the impacts, *both positive and negative*, of synthetic biology as a solution to real world problems, through interviewing professionals working in a relevant field, namely the impact of arsenic water contamination in Bangladesh.
  2. We recognized existing problems with the way the current direction of synthetic. On going through the registry we found that most of the characterization data for biosensing parts is often neither comparable nor replicable. We have worked to solve this issue, for example with our ratiometric dual channel output.
  3. *Our project doesn’t stop here*, in Chanel number 6 (Team:Cambridge/HumanPractices/FutureDirections) we considered the future implications and technological applications of our project, as well as the means by which it could be improved by subsequent users. We feel that the end to an iGEM project should not be the conclusion of an idea, but the start of it.

Best BioBrick Measurement Approach:

It is absolutely vital that a quantitative, numerical, robust, and flexible measurement approach exists to relay information to a user that is an accurate representation of the input processed by a biological device. Working from these principles, the following was done:

  1. We designed and built Biologger, a *cheap, arduino-based, fully functional automatic rotary device* that has an incorporated ratiolumnometer
  2. Our project is entirely open-sourced and open-platform. We have published source code for the two applications which serve to operate the device, one for PCs and the other for Android devices, as well as the open source circuit design that provides this ratiometric reading. Furthermore, the Android app is able to receive its data wirelessly, which we feel is a great advance in BioBrick measurement.
  3. Our dual-channel luciferase reporter was successfully tested with a dilution series of E.coli transformed with the Lux Operon (under pBAD) biobrick (Part BBa_K325909) of the Cambridge iGEM 2010 team. It can detect, with good accuracy, both different light intensities, as well as the percentages of blue or orange frequencies in a sample.
  4. Our device was successfully tested using artificial light to detect different frequencies (colours) as well.

Having done all the above, we believe that this fully open-sourced instrumentation kit (mechanical) chassis, electronics, software code), estimated at *$35.00* (or $85.00 if a Bluetooth modem is required), is a complete BioBrick measurement solution for any and all BioBricks with a light output.

Back to wiki

Team_Parts

To help the judges evaluate your parts, please identify 3 of your parts that you feel are best documented and are of the highest quality.

  • Best new BioBrick part (natural)
    [http://partsregistry.org/Part:BBa_K911003 BBa_K911003]
    Best new BioBrick part (engineered)
    [http://partsregistry.org/Part:BBa_K911004 BBa_K911004]
  • Best improved part(s): None

List any other parts you would like the judges to examine:[http://partsregistry.org/Part:BBa_K911001 BBa_K911001], [http://partsregistry.org/Part:BBa_K911008 BBa_K911009], [http://partsregistry.org/Part:BBa_K911008 BBa_K911008]

Please explain briefly why the judges should examine these other parts:

  • Magnesium Sensitive Riboswitch [http://partsregistry.org/Part:BBa_K911001 BBa_K911001]
    As a riboswitch sensing construct, this part is an entirely new type of biosensor (along with the fluoride construct) that could potentially change the way we think about designing input genetic circuits. Unlike the fluoride riboswitch, it is a derepression system and therefore serves to demonstrate the principle that riboswitches can be used regardless of whether they turn on or off their reporter.
  • Fluorescent ratiometric construct for standardizing promoter output [http://partsregistry.org/Part:BBa_K911009 BBa_K911009]
    Fluorescence is a major cornerstone for biosensors in the registry, however, most parts do not involve the use of a ratiometric output, which has been shown in the literature to provide much more reliable and meaningful data. This part not only furthers the development of ratiometric measurements in molecular biology but due to the choice of promoters and terminators it can be used to characterize the difference in activity between E. coli and B. Subtilis
  • Fast Germination (B. subtilis) [http://partsregistry.org/Part:BBa_K911008 BBa_K911008]
    This part is entirely novel for the registry and fully utilizes the recombination machinery inherent in the Bacillus chassis. Have spores that can germinate at a faster rate is certainly a worthy achievement and could help with experiments with B. Subtilis that any future iGEM teams may wish to perform.

Back to wiki

iGEM Safety

For iGEM 2012 teams are asked to detail how they approached any issues of biological safety associated with their projects.

The iGEM judges expect that you have answered the four safety questions Safety page on your iGEM 2012 wiki.

Please provide the link to that page: Page name: Team:Cambridge/Safety

Attribution and Contributions

For iGEM 2012 the description of each project must clearly attribute work done by the team and distinguish it from work done by others, including the host labs, advisors, and instructors.

Please provide the link to that page, or comments in the box below: Page name: Team:Cambridge/Attributions

Comments

If there is any other information about your project you would like to highlight for the judges, please provide a link to your wiki page here: Team:Cambridge/Overview/DesignProcess

Week: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 The Final Month

Our final month of work on Sporduino

So, unsurprisingly, given that we have been lauched into term time at the same time as finishing off our project, not as much work has been done as would necessarilly be desired.

More BioBricks!

Two more biobricks (the fluoride riboswitch and ratiometrica) have successfully been produced, and will hopefully be submitted to the registry ASAP. On the subject of ratiometrica, we have attempted some more plate reader assays - alas, M9 fails to grow cells with any competency. Or else we are just incompetent at making M9. In any case, the data that we had before the European jamboree remains our most useful. Attempts to insert the fluoride riboswitch into ratiometrica have also failed, possibly due to the tiny size of the riboswitch insert.

Luciferase development

We have, however, managed to get some data regarding our luciferase construct from DNA2.0. Matthew Hawkeye from the nanophotonics department of the University has kindly helped Tom to determine the emission spectrum of the construct, both induced and uninduced. Alas No. 2, we were unable to replicate the results of the original paper which demonstrated a spectral shift upon the addition of mOrange. Toxicity appears to have increased in the presence of IPTG, which could be stretched to a positive finding (it would appear to indicate that we are producing considerably greater quantities of the LUXA - mOrange fusion than under normal conditions, which puts the metabolism of the cell under considerable strain). We would be hard pressed to consider this an optimal result, however.

Konrad Seigfried Interview

Interestingly, Konrad Seigfried got back in touch with us. He was hoping to form a collaborative effort in producing an EU project proposal involving the use of biosensors in general - and with our fluoride biosensor prototype in particular! Unfortunately, we were unable help in any but the most superficial way - we sent him our data concerning the various characterization experiments that we had performed. Alas No. 3, there simply wasn't the time (or the lab based resources) to collaborate any further.

Collaboration

We have been talking closely with this year's deserving Europe regional winner, Groningen. Both our projects have a large Bacillus-spores aspect to them.