Team:UC Davis/Notebook

From 2012.igem.org

(Difference between revisions)
Line 421: Line 421:
<br><br>
<br><br>
<b>Wednesday June 20th</b><br>
<b>Wednesday June 20th</b><br>
-
Miniprepped the liquid cultures from yesterday.
+
As soon as we came into lab today, some of our team members began miniprepping the liquid cultures from yesterday. These were nanodropped, and the concentrations looked good! Some of our team members were also taught how to make and use gels, as we ran the digested parts from yesterday on a one percent agarose gel. We also made another stock of 1x TAE buffer from the 50x TAE buffer by dilution. Once extracted, the parts were ligated and transformed, which took some time. Once finished, we stored them for further examination.  
-
Nanodropped the samples.
+
In terms of research, we spoke with one of our mentors, and narrowed down the possible project ideas to either plastic degradation or a toolkit for archaea. The spider silk seemed to be more and more impractical as we read more papers concerning the spinning and formation of the fibrous materials that make up spider silk.
-
Ran the digested parts from yesterday on the gel and extracted them.
+
-
Ligated and transformed these parts.
+
-
Made iGEM Contact List. Narrowed the project down to plastic degradation and Archaea.
+
<br><br>
<br><br>
<b>Thursday June 21st</b><br>
<b>Thursday June 21st</b><br>
-
Ligation was unsuccessful
+
Today consisted of mainly reading and researching more into pathways for plastic degradation and meeting the gold medal requirements. The Ligation from yesterday turned out to be unsuccessful, but the parts we were trying to ligate were not immediately necessary, but it was rather done more for practice. We also went out as a team to a sushi buffet, continuing a tradition of team bonding on Thursday for lunch.  
-
Ate sushi buffet. Continued the tradition for team bonding.
+
<br><br>
<br><br>
<b>Friday June 22nd</b><br>
<b>Friday June 22nd</b><br>
-
Met with the advisors. Narrowed down our project to one of plastic degradation. We also want to construct an Archaea tool kit.
+
Friday was assigned as a weekly meetup day with our entire team and our advisors. We explained where we are at in terms of researching for our project, and they gave us some interesting aspects we can look at. We narrowed our project down to just plastic degradation, as the archaea engineering would be a clear cut contribution to the parts registry, but would not be as interesting to the team as a whole and not a sufficient project to pursue for the entire summer. However, it was suggested that we make a toolkit for parts for archaea so future iGEM teams can pursue constructs in archaea.  
-
To be continued...  
+
</article>
</article>
   </div>
   </div>
Line 444: Line 439:
<article>
<article>
<b>Monday June 25th</b><br>
<b>Monday June 25th</b><br>
-
Research. We ruled out the spider silk idea and decided to focus our attention on plastic degradation. The toolkit idea was also considered a secondary project idea.
+
Monday signified the beginning of week two for iGEM! The day was mainly composed of reading papers and looking into ways to which we could degrade plastic. We also scheduled a visit to a local landfill, with an intent to see how the landfill deals with plastics and other synthetic polymers. The toolkit idea was also considered a secondary project idea.
<br><br>
<br><br>

Revision as of 21:14, 30 July 2012

Team:UC Davis - 2012.igem.org


Week 1

Monday June 18th
Today was the first day of out iGEM team officially meeting in the summer. We got a look around the laboratory space we would be using, and since almost everyone on the team is new to iGEM, we went over the things we had to accomplish over summer. We re-hydrated some parts from the distribution kits to get practice, and those parts were: J23101 E0240 E0040 R0010 pSB1C3 pSB1A3 pSB1AK3 pSB1K3 B0034 I13602
These parts were later transformed into the E. Coli strain DH5α.
We cultured 4 parts from the glycerol stocks for more practice. The parts were: J45120, which emits a wintergreen scent. This was done in 2mM salisylic acid. J45200, which emits a banana scent, respectively done in 5mM isoamyl alcohol. R0010, as a promoter E0240, or more commonly known as GFP! Our team took time to discuss our project, and comparing our interest with the research that has been conducted thus far, we narrowed our project down to three ideas: 1. Producing spider silk proteins in bacteria. 2. Degrading plastics in bacteria. 3. Creating an Archaea toolkit and using them for bioplastic, biofuel, and isoprenoid production. We realized that more research had to be done to understand what each project specifically requires to judge how feasible and successful it could be.

Tuesday June 19th
We began the day with some wetlab work to keep on practicing techniques. The E. coli cultured with J45200 smelled like bananas, which was exciting! The R0010 and E0240 liquid cultures were miniprepped, but we messed up on them due to inexperience. More practice was done to learn the procedures of DNA purifications, while other members of the team nanodropped the miniprepped R0010 and E0240 liquid cultures for practice using the machine. Following the nanodrop, a digestion was set up of the R0010 and E0240 parts. R0010 was cut at SpeI and PstI sites; E0240 was cut at XbaI and PstI. We liquid cultured the transformations from yesterday, and made plates and LB media. In terms of our project, more research was done on spider silk and plastic degradation, as we read papers on studies that dealt with both themes and we looked at the methodology used to approach the problems, searching for similar assays and pathways that we could use.

Wednesday June 20th
As soon as we came into lab today, some of our team members began miniprepping the liquid cultures from yesterday. These were nanodropped, and the concentrations looked good! Some of our team members were also taught how to make and use gels, as we ran the digested parts from yesterday on a one percent agarose gel. We also made another stock of 1x TAE buffer from the 50x TAE buffer by dilution. Once extracted, the parts were ligated and transformed, which took some time. Once finished, we stored them for further examination. In terms of research, we spoke with one of our mentors, and narrowed down the possible project ideas to either plastic degradation or a toolkit for archaea. The spider silk seemed to be more and more impractical as we read more papers concerning the spinning and formation of the fibrous materials that make up spider silk.

Thursday June 21st
Today consisted of mainly reading and researching more into pathways for plastic degradation and meeting the gold medal requirements. The Ligation from yesterday turned out to be unsuccessful, but the parts we were trying to ligate were not immediately necessary, but it was rather done more for practice. We also went out as a team to a sushi buffet, continuing a tradition of team bonding on Thursday for lunch.

Friday June 22nd
Friday was assigned as a weekly meetup day with our entire team and our advisors. We explained where we are at in terms of researching for our project, and they gave us some interesting aspects we can look at. We narrowed our project down to just plastic degradation, as the archaea engineering would be a clear cut contribution to the parts registry, but would not be as interesting to the team as a whole and not a sufficient project to pursue for the entire summer. However, it was suggested that we make a toolkit for parts for archaea so future iGEM teams can pursue constructs in archaea.

Week 2

Monday June 25th
Monday signified the beginning of week two for iGEM! The day was mainly composed of reading papers and looking into ways to which we could degrade plastic. We also scheduled a visit to a local landfill, with an intent to see how the landfill deals with plastics and other synthetic polymers. The toolkit idea was also considered a secondary project idea.

Tuesday June 26th
We practiced lab protocols a bit more, and conducted more research after finding out the planned trip to the landfill. We also prepared questions and did research concerning what the landfill does and how we can benefit from it.

Wednesday June 27th
Today we went to the Yolo County Landfill to meet with Ramin Yazdani, the senior civil engineer at the landfill. We were given a tour of the landfill, and discussed procedures and systems Dr. Yazdani has in place regarding the decomposition of trash, specifically in terms of methanogens and methanotrophs. He similarly provided us with guidance concerning the direction of our project, and the possible application and impact our project could potentially have in terms of trash degradation.

Thursday June 28th
We spoke with our mentors regarding the feasibility of our project within the given time span. Ruled out polyurethane due to toxic byproducts.

Friday June 29th
Conducted more research in engineering methanogens and methanotrophs. We also looking into how our project could apply to the landfill, and discussed the feasibility of PET degradation versus methanotroph and methanogen .

Week 3

Monday July 2nd
We further looked into the means by which our project can be outlined and planned. -Our team read a paper titled Isolation of a Novel Cutinase Homolog with Polyethylene Terephthalate-Degrading Activity from Leaf-Branch Compost by Using a Metagenomic Approach to further understand the mechanism by which cutinase assists in plastic degradation. -We looked at the value of surface modification, specifically how it alters PET and whether or not it is valuable. -Research was conducted on PelB and the potential for a scar, and furthermore whether a scar will influence our results.

Tuesday July 3rd
Today we focused on wet-lab procedures -We rehydrated the PelB tag (J32015), T7 constitutive promoter (I719005), Stop (B0015), And LuxR inducible promoter (C0062). -We also transformed the parts mentioned above. TRANSFORMATION PROCEDURE HYPERLINK HERE. -We plated the parts. PROCUDURE HERE

Wednesday July 4th
We took the previous day's plates and ran liquid cultures on all of them. PROCUDURE -We took a half day for July 4th!

Thursday July 5th
We conducted a double digest of the T7 constitutive promoter (I719005) and Ribosome Binding Site (B0034). DOUBLE DIGEST PROCEDURE -We worked on the safety page of our wiki after concern arose regarding the safety of procedures in our planned project. We continued research regarding how we can plan and carry out our project.

Friday July 6th
We created an in-depth plan for how we were going to assess our project. We divided the project up into manageable sections and assigned particular areas to people on our team. -We took a look at the requirements for achieving the Gold medal, and wrote down and organized how we are going to achieve each criteria.

Week 4

Monday July 9th
We wanted to re-hydrate some parts, they are listed below. They were located in the distribution kits.
J23100 J23119 J23100 I13453 I13458 C0012 K206000
Along with these parts, we also looked at a new miniprep kit that was given to us for free, titled Biobasic. We wanted to test it in comparison to the Invitrogen kit we currently use. Following the hydration we transformed the parts and left them overnight in the 37 degree room.

Tuesday July 10th
Today we did a double digest of B0034 at the S and P sites and sequentially digested B0034 first at the E site using Buffer 4. We miniprepped samples using both the Invitrogen and Biobasic kits. Using the nanodrop spectroscopy, we determined that the Invitrogen kit was still better, so we continued to use that. We also began to look into Gibson assembly, and due to past iGEM inability to attain success, we requested the protocol from the iGEM Washington 2011 team.

Wednesday July 11th


Thursday July 12th


Friday July 13th