Team:Slovenia/Notebook

From 2012.igem.org

(Difference between revisions)
Line 915: Line 915:
<li>Luminescence of expressed reporter firefly luciferase was then measured with Orion (Berthold Technologies) using Luciferase buffer with luciferin as a substrate. For normalization Renilla luciferase activity was used. The Renilla luciferase was measured using Renilla buffer supplemented with colelenterazine.</li>
<li>Luminescence of expressed reporter firefly luciferase was then measured with Orion (Berthold Technologies) using Luciferase buffer with luciferin as a substrate. For normalization Renilla luciferase activity was used. The Renilla luciferase was measured using Renilla buffer supplemented with colelenterazine.</li>
</ol>
</ol>
 +
 +
 +
<!-- -------------------------------------------------------- -->
 +
<h2>Microscopy</h2>
 +
For spatial and temporal imaging of samples a Leica TCS SP5 laser scanning microscope mounted on a Leica DMI 6000 CS inverted microscope (Leica Microsystems, Germany) with a 10× and 20× dry objective and an HCX plan apo 63× oil (NA 1.4) oil immersion objective was used. For image analysis we used the ImageJ (Image Processing and Analysis in Java) software (<a href="http://rsbweb.nih.gov/ij/">http://rsbweb.nih.gov/ij/</a>) measuring the mean grey values of each cell containing the promoter of interest.
 +
<br/>
 +
<h3>Microscopy-cell viability with Hoechst and SytoxGreen514 (Safety mechanisms)</h3>
 +
<b>Hoechst</b> dye is membrane permeable dye and stains all cells in a culture. On the other hand a <b>SytoxGreen514</b> dye is membrane impermeable dye staining only dead cells. Both dyes blue fluorescent Hoechst and green fluorescent binds SytoxGreen514 bind to nucleic acids to fluoresce.
 +
<ol>
 +
<li>HEK293 cells were seeded in an 8-well microscope chamber and transfected with 100 ng CMV-mGMK_TK30 (pPCMV-mGMK_TK30).</li>
 +
 +
<li>Ganciclovir (GCV) in concentrations 0, 10 and 100 μg/mL was added to the cell cultures.</li>
 +
 +
<li>After 5 days of cultivation, a Hoechst dye (0.4 μg/mL) and a SytoxGreen514 dye (1 μM) were used to stain cells and discriminate between alive and dead cells.</li>
 +
 +
<li>Cells were incubated for approximately 10 minutes in dark at 37 °C before being imaged.</li>
 +
 +
<li>A 405-nm diode laser was used to excite Hoechst and a 514-nm line of 25 mW multi ion argon laser was used to excite SytoxGreen514. Successive images excited at 405 and 514 nm were captured. Fluorescence emission was detected at 450-500 nm and 520-560 nm for Hoechst and SytoxGreen respectively.</li>
 +
</ol>
 +
 +
 +
<br/>
 +
<h3>Microscopy-cell growth (Safety mechanisms)</h3>
 +
<ol>
 +
<li>HEK293 cells were seeded in an 8-well microscope chamber and transfected with 100 ng CMV-mGMK_TK30 (pPCMV-mGMK_TK30) and/or 20 ng mCitirne (pPCMV-mCitrine) (a transfection control).</li>
 +
 +
<li>Ganciclovir (GCV) in concentrations 0, 10 and 100 μg/mL was added to the cell cultures.</li>
 +
 +
<li>After 5 days of cultivation, a cell cultures were imaged.</li>
 +
 +
<li>A 514-nm line of 25 mW multi ion argon laser was used to excite mCitrine reporter protein. Fluorescence emission was detected at 520-560 nm for mCitrine. Bright field images were used to visualize number of cells.</li>
 +
</ol>
 +
 +
<br/>
 +
<h3>Microscopy-cell count (Safety mechanisms)</h3>
 +
<ol>
 +
<li>HEK293 cells were seeded in 12-well plates and transfected with and transfected with 100 ng CMV-mGMK_TK30 (pPCMV-mGMK_TK30).</li>
 +
 +
<li>Cell cultures were treated with ganciclovir (GCV) in concentrations as indicated in figure legend.</li>
 +
 +
<li>After incubation the cells were resuspended by pipetting.</li>
 +
 +
<li>Cells suspension was then mixed with trypan blue.</li>
 +
 +
<li>Viable cell number was determined by counting the cells under a light microscope using Bürker-Türk counting chamber.</li>
 +
</ol>
 +
 +
<br/>
 +
<h3>Microscopy-detection of reporter proteins (The Switch)</h3>
 +
<p>
 +
Reporters such as fluorescent proteins were used to detect expression of efektor in "The switch experiments". As reporters we used blue (tagBFP), yellow (mCitrine), orange (mCherry) and red fluorescent proteins (mNeptun). mCherry was used as transfection control, the others were used as reporters of "the switch".
 +
</p>
 +
<ol>
 +
<li>HEK293T cells were seeded in an 8-well microscope chamber or 12-well plate and transfected with plasmids for the switch. Plasmids and amount used for transfection are listed in Figure legends.</li>
 +
 +
<li>Two hours after transfection, media was changed and cells were stimulated with inducers. Inducers and their concentration are described in Figure legends.</li>
 +
 +
<li>Media supplemented with inducer or without inducer were changed after two days cultivation.</li>
 +
 +
<li>Images of cells expressing reporters were taken two days after transfection and inducers addition and then each day for 5 days.</li>
 +
 +
<li>A 405-nm diode laser was used to excite tagBFP, a 514-nm line of 25 mW multi-ion argon laser was used for mCitirne, a 543-nm HeNe laser was used for mCherry and a 633-nm HeNe laser was used to excite mNeptune. Successive images excited at 405, 514, 543 and 633 nm were captured. All intensities of laser and photomultipliers were kept unchanged during set of experiment to enable comparison of images. Fluorescence emission was detected at 450-500 nm, 520-560 nm, 560-600 nm and 640-700 nm for tagBFP, mCitrine, mCherry and mNeptune, SytoxGreen respectively.</li>
 +
</ol>
 +
 +
<br/>
 +
<h3>Microscopy-alginate degradation (Microencapsulation)</h3>
 +
<p>
 +
To observe alginate beads degradation, 2000 kDa FITC-dexstran (Sigma) was added to 200 µL of culture medium containing alginate beads with immobilized HEK 293T cells. Because FITC-dexstran cannot penetrate into algnate beads, we can easily observe bead degradation uppon addition of alginate lyase from <i>Sphingobacterium multivorum</i> (Sigma).</p>
 +
<ol>
 +
<li>Alginate beads suspended in culture medium were seeded into an 8-well microscope chamber (200 µL).</li>
 +
 +
<li>20 µL of 1 mg/mL FITC-dextran were added into well.</li>
 +
 +
<li>After the dye has been evenly distributed throughout the suspension, 8 µL of Sphingobacterium multivorum alginate lyase were added.</li>
 +
 +
<li>Microscope was set to capture images every 20 seconds.</li>
 +
 +
<li>Screenshots were collected for at least 15 minutes.</li>
 +
 +
<li>A 488-nm line of 25 mW multi-ion argon laser was used for FITC. Fluorescence emission was detected at 520-560 nm. At the same time a bright field image was taken.</li>
 +
</ol>
 +
 +
<br/>
 +
<h3>Microscopy-encapsulated cells viability (Microencapsulation)</h3>
 +
<p>
 +
To observe encapsulated cells' viability, HEK 293T cells were dyed with Hoechst and 7-aminoactinomycin D (7-AAD) viability stains. Hoechst stains both living and dead cells, while 7-AAD stains dead cells only.</p>
 +
<ol>
 +
<li>Encapsulated cells were grown in DMEM culture medium supplemented with 10% FBS.</li>
 +
 +
<li>200 µL of microcapsule suspension were collected and alginate-PLL capsules were seeded into an 8-well microscope chamber.</li>
 +
 +
<li>5 µL of 7-AAD and 1 µL of Hoechst stain were added into well.</li>
 +
 +
<li>Encapsulated cells were protected from direct light and stained for 30 min at 37 °C.</li>
 +
 +
<li>Microscope chamber was transfered to Leica confocal microscope.</li>
 +
 +
<li>A 405-nm diode laser was used to excite Hoechst and a 543-nm line of HeNe laser was used to excite 7-AAD.</li>
 +
 +
<li>Fluorescence emission was detected at 450-500 nm and 600-700 nm for Hoechst and 7-AAD respectively.</li>
 +
</ol>
 +
 +
 +
<br/>
<br/>

Revision as of 21:15, 24 September 2012


Experimental methods

Figure 1. Schematic presentation of methods used for cloning and culturing eukaryotic cells.




Figure 2. Schematic presentation of methods used for characterizing the switch, safety mechanisms, microencapsulation and effectors.

Cloning

Plasmid DNA isolation

A. MINI PREPs for analysis and sequencing
  1. A single colony was picked from a LB-agar plate or glycerol stock and inoculated 10 mL LB-medium with appropriate antibiotic for selection (100 mg/L ampicillin, 50 mg/L kanamycin, 35 mg/L chloramphenicol).
  2. Bacteria were grown over night at 37 °C while shaking.
  3. Plasmid DNA was isolated from 2-6 mL of over-night culture with GeneJET plasmid miniprep kit according to manufacturer's protocol.
  4. Around 6-10 µg plasmid DNA was obtained.
  5. Purity and amount of DNA was analysed using a NanoDrop.

Fragment DNA isolation from agarose gel

A. AGAROSE ELECTROPHORESIS
  1. A mixture of DNA fragments with different sizes were separated with agarose gel (0.7 and 2% agarose in 0.5x TAE buffer and 0.1 µg/ml ethidium bromide) at constant voltage of 100 V.
  2. UV light (λ = 254 nm) was used to visualize ethidium bromide intercalated into DNA.
  3. Position of DNA fragments are documented and cut out from agarose.

B. FRAGMENT ISOLATION from agarose gel
  1. The band with the desired DNA fragment was excised from the gel, using a clean scalpel.
  2. DNA was isolated from the gel slice with GeneJet Gel Extraction Kit according to manufacturers protocol.
  3. Purity and amount of DNA was determined using a NanoDrop.

Restriction digest

  1. Set up a restriction mixture:
      for analysis of cloned DNA
    • 1X optimized Restriction buffer (10X)
    • 0.5 µL restriction enzyme (10 U/µL)
    • Bring volume to 20 µL with nuclease-free water.
    or
      for isolation of specific DNA
    • 1X optimized Restriction buffer 10X
    • up to 2 µL restriction enzyme 10 U/µL
    • Bring volume to 50 µL with nuclease-free water.
  2. The sample was incubated at optimal temperature for the restriction enzyme(s)
  3. Analysis of fragmented DNA was done by gel electrophoreses (loading dye was added to the samples before loaded on a agarose gel)
  4. Results were documented with
  5. Desired DNA fragment was excised and purified using suitable DNA purification kit.

PCR

A. PCR REACTION
AccuPrime and Phusion polymerase were used for DNA amplification. Colony PCR was preformed with Taq polymerase.
  1. For Phusion polymerase: master mix contained
    • DNA (1-10 ng)
    • both primers (0,4 pmol/µl )
    • 1x Phusion HF buffer
    • 0,2 µM dNTPs
    • Phusion polymerase (0,02 U/ µl) and
    • MQ up to final volume of 25 µl
  2. vAccuPrime reaction contained:
    • DNA (10 ng),
    • both primers (0,4 pmol/µl ),
    • 1xRnx mix,
    • enzyme (0,05 U/ µl) and
    • MQ up to final volume of 50 µl.
  3. Taq polymerase mix contained:
    • both primers (0,4 pmol/µl),
    • 1x Taq PCR buffer II,
    • 0,2 µM dNTPs,
    • 5mM MgSO4,
    • enzyme (0,125 U/ µl) and
    • MQ up to total volume of 20 µl.
    • Then the bacterial colony was added to the reaction mix.
  4. All temperature programs were designed according to manufacturer protocol, primers melting temperature and length of desired PCR products. Reactions were preformed in Applied Biosystems Veriti 96 well thermal cycler.

B. PCR product purification
Desired PCR product was purified by GeneJet Gel Extraction Kit according to manufacturer's protocol.

DNA concentration. An aliquot of DNA isolation was analyzed using a NanoDrop.

Gibson Assembly

Gibson assembly master mix was prepared as by Gibson at al., 2009.
  1. 50 ng of each PCR product were added to Gibson assembly master mix and incubated at 50 °C.
  2. After incubation, the transformation in bacteria was preformed.

Ligation

T4 ligase joins the 5' phosphate and the 3'-hydroxyl groups of DNA.
  1. Estimate the vector and insert concentrations and set molar ratio of insert to vector 3:1 (100-150ng Vector DNA).
  2. Set up a ligation mixture:
    1X ligase buffer (10X)
    1 µL T4 ligase (3 U/µL)
    Bring volume to 10 or 20 µL with nuclease-free water.
  3. Incubate sample for sticky-end ligation reactions at room temperature for 3 hours (or at 4 to 8 °C, overnight).
    or
    Incubate blunt-end ligation reactions at 17 °C for 4 to 18 hours.
  4. After incubation part of the ligation mixture is used for transformation of bacterial cells (see: transformation of bacteria)

Culturing clones

A. BACTERIA
For plasmid DNA propagation two bacterial strains were used: DH5alpha [fhuA2Δ(argF-lacZ)U169 phoA glnV44 Φ80 Δ(lacZ)M15 gyrA96 recA1 relA1 endA1 thi-1 hsdR17] and TOP10 [mcrA, Δ(mrr-hsdRMS-mcrBC), Phi80lacZ(del)M15, ΔlacX74, deoR, recA1, araD139, Δ(ara-leu)7697, galU, galK, rpsL(SmR), endA1,nupG].

B. GROWTH MEDIA for BACTERIA
Luria Broth (LB)
  • 10 g/L tryptone
  • 5 g/L yeast extract
  • 10 g/L NaCl
  • media is supplemented with suitable antibiotics depending on selection marker on transfected plasmid: ampicilin 100 mg/L or kanamycin 50 mg/L
LB agar plates
  • LB with 1.5% agar
  • media is supplemented with suitable antibiotics depending on selection marker on transfected plasmid

Transformation of bacteria

For enrichment of vectors E. coli DH5alpha and TOP10 were used.
  1. 100 µL of competent cells were thawed on ice.
  2. 50 – 400 ng DNA solution was added to competent bacterial cells (depending on the concentration of the DNA solution).
  3. A mixture of cells and DNA solution was incubated on ice for 30-60 minutes.
  4. Than the mixture was heat-shocked for 45 seconds at 42 °C.
  5. Cooled down for 3 minute on ice.
  6. The mixture were than rescued by adding 500 µL preheated antibiotic free LB-medium and incubated for one hour at 37 °C while shaking for induction of the antibiotic resistance.
  7. The selection for plasmid containing and therefore antibiotic resistant bacteria was conducted by plating them on antibiotic containing LB-agar plates.

Glycerol stock for long term storage of bacteria

  1. 1 mL of an overnight culture was added to 150 µL of 80% glycerol into a cryo-tube.
  2. Mixed and incubated at room temperature for 30 min.
  3. Afterwards the glycerol stock was stored at -80 °C.

Cell cultures

Eucaryotic cell lines and cultivation

HEK293 is a human cell line derived from kidney cells and grows in a monolayer culture. Cells were grown in DMEM medium supplemented with 10% FBS.

HEK293T cell line is derived form HEK293 cells. HEK293T cells express the SV40 large T-antigen that enables episomal replication of plasmids containing the SV40 origin of replication in transfected cells. Cells were grown in DMEM medium supplemented with 10% FBS.

NK-92 is an interleukin-2 (IL-2) dependent natural killer cell line derived from peripheral blood mononuclear cells from patient with non-Hodgkin's lymphoma. The cell line is cytotoxic to a wide range of malignant cells. Cells were grown in RPMI medium supplemented with 20% FBS and 100 U/ml IL-2.


Cultivation

A. SUBCULTURING MONOLAYER CELL CULTURES
  1. Remove and discard culture medium from a T-75 flask containing a monolayer of HEK293 or HEK293T cells.
  2. Rinse the T-75 flask with 10 ml of PBS buffer to remove all traces of growth medium (DMEM + 10% FBS) which otherwise inhibits trypsin function. Remove and discard the PBS buffer.
  3. Add 2-3 ml of trypsine solution and gently tilt the flask to ensure the trypsine solution covers all the cells. Incubate the cells in trypsin for 0,5 - 3 min.
  4. When the cells start to detach from the surface, add 7 ml of growth medium to the trypsin solution. Resuspend all remaining cells from the bottom of the T-75 flask by pipetting.
  5. Transfer the cell suspension to a 15 ml centrifuge tube.
  6. Centrifuge the cell suspension for 5 min at 1200 rpm.
  7. Remove the trypsin-containing medium from the centrifuge tube.
  8. Resuspend the cell pellet in fresh medium.
  9. Take as much cells as you need and add fresh medium to a total volume of 10 ml.
  10. Return the cells in a T-75 flask to the incubator (37 °C, 5 % CO2).

B. CELL PLATING
  1. Count cells.
  2. Calculate the desired number of cells per well. Dilute cells in DMEM with 10% FBS.
  3. Transfer the cells into an appropriate plate and place in a cell culture incubator.

MEDIA and BUFFERS
DMEM supplemented with
  • 1 % L-Glutamine (GlutaMax)
  • 10 % FBS
  • Optionally: 1% Pen/Strep

RPMI supplemented with
  • 1 % L-Glutamine (GlutaMax)
  • 20 % FBS

Transfection

TABLE: Transfection mixtures for different culture format
Culture format jetPEI reagent per µg of DNA (µL) Typical amount of DNA (ng) Volume of 150 mM NaCl solution for DNA and jetPEI (µL) Total transfection mixture volume (µL)
96-well 2 200 10 20
24-well and 8-well microscope chamber 2 500 50 100
12-well 2 1000 50 100
6-well 2 2000 100 200
10 cm 2 15000 250 500
  1. Dilute plasmid DNA to desired concentration in 150 mM NaCl, vortex gently and spin down briefly.
  2. Dilute jetPEI (PolyPlus) in 150mM NaCl, vortex gently and spin down briefly.
  3. Add the jetPEI solution to the DNA solution.
  4. Vortex the solution immediately and spin down briefly.
  5. Incubate for 15 to 30 minutes at room temperature.
  6. Add the jetPEI/DNA mix to the cells in and gently swirl the plate.
  7. Return the plate to a cell culture incubator.

Induction systems

The induction systems are described here.

Induction of cells

  1. Transfect HEK293 or HEK293T cells with plasmids using JetPei transfection reagent (Polyplus transfection), following the manufacturers protocol (see cell culturing for details).
  2. 2 hours post transfection change media and stimulate the cells by adding dilutions of appropriate inductors to the medium in a 1:10 (v:v).
  3. After 2-3 days of incubation, replace cell medium with fresh medium and stimulate again appropriately.
Inductor Stock solution (solvent) Dilution (solvent) Concentration in cell medium (% solvent)
Rapalogue (AP21967 1 mM (100% ethanol) 10 µM (1% ethanol) 1 µM (0,1% ethanol)
Doxycyclin 1 g/L (MQ) 10 mg/L (MQ) 1 mg/L (MQ)
Pristinamycin 50 g/L (100% DMSO) 20 mg/L (1% DMSO) 2 mg/L (0,1% DMSO)
Erythromycin 50 g/L (100% ethanol) 20 mg/L (1% ethanol) 2 mg/L (0,1% ethanol)

Effectors

Biological assay

DETECTION OF THE ACTIVITY OF ANAKINRA, produced in HEK293T cells
  1. HEK293T cells, seeded in 6-well plate, were transfected with anakinra downstream of constitutive promoter.
  2. Transfected cells were incubated for 48 h.
  3. To detect anakinra's effect on NF-κB signalling pathway, other HEK293T cells were transfected with plasmid coding for Renilla luciferase and plasmid reporter with NF-κB-inducible firefly luciferase expression. HEK293T cells express IL-1R, so additional transfection with receptor gene wasn't needed.
  4. After 24 h, medium was removed from cells transfected with reporter plasmids and 90 μL of anakinra-producing cells' supernatant was added to these wells.
  5. After 24 h of stimulation, cells were lysed and NF-κB activation was assessed using dual luciferase assay.

DETECTION OF IFN-ALPHA, produced in HEK293T cells
  1. HEK293T cells transfected with either the IFN-alpha encoding plasmid or an empty vector, and HEK293T cells transfected with the reporter vector were co-cultivated.
  2. Additionally, we performed a co-transfection experiment, where HEK293T cells were transfected with both the reporter and the IFN-alpha encoding plasmids.
  3. Day after transcfection cells were cultivated into 96-well plate at density 5x104 cells per well
  4. After 24 hours of incubation, dual luciferase reporter assay was preformed.

ELISA for IFN-alpha
  1. HEK293T cells where plated on 6 well plates and transfected with a plasmid coding for human IFN-alpha or a control plasmid (pcDNA3).
  2. Supernatants were collected after 16h and serial dilutions were measured for IFN-alpha levels by Human IFN-alpha Instant Elisa (eBioscience).

PLATE READER-FLUORESCENCE (The Switch)
  1. HEK293T cells were seeded in a black 96-well plate and transfected with plasmids for the switch. Plasmids and amount used for transfection are listed in Figure legends.
  2. Two hours after transfection, media was changed and cells were stimulated with inducers. Inducers and their concentration are described in Figure legends.
  3. Media supplemented with inducer or without inducer were changed after two days cultivation.
  4. 2 days after inductions and then 3 days after second media change cells were lysed with 25 µL of 1x Passive lysis buffer (Promega).
  5. Fluorescence was then measured using an automated plate reader.

PLATE READER-LUMINESCENCE (The Switch)
  1. HEK293T cells were seeded in a white 96-well plate and transfected with plasmids for the switch. Plasmids and amount used for transfection are listed in Figure legends.
  2. Two hours after transfection, media was changed and cells were stimulated with inducers. Inducers and their concentration are described in Figure legends.
  3. Media supplemented with inducer or without inducer were changed after two days cultivation.
  4. 2 days after inductions and then 3 days after second media change cells were lysed with 25 µL of 1x Passive lysis buffer (Promega).
  5. Luminescence of expressed reporter firefly luciferase was then measured with Orion (Berthold Technologies) using Luciferase buffer with luciferin as a substrate. For normalization Renilla luciferase activity was used. The Renilla luciferase was measured using Renilla buffer supplemented with colelenterazine.

Microscopy

For spatial and temporal imaging of samples a Leica TCS SP5 laser scanning microscope mounted on a Leica DMI 6000 CS inverted microscope (Leica Microsystems, Germany) with a 10× and 20× dry objective and an HCX plan apo 63× oil (NA 1.4) oil immersion objective was used. For image analysis we used the ImageJ (Image Processing and Analysis in Java) software (http://rsbweb.nih.gov/ij/) measuring the mean grey values of each cell containing the promoter of interest.

Microscopy-cell viability with Hoechst and SytoxGreen514 (Safety mechanisms)

Hoechst dye is membrane permeable dye and stains all cells in a culture. On the other hand a SytoxGreen514 dye is membrane impermeable dye staining only dead cells. Both dyes blue fluorescent Hoechst and green fluorescent binds SytoxGreen514 bind to nucleic acids to fluoresce.
  1. HEK293 cells were seeded in an 8-well microscope chamber and transfected with 100 ng CMV-mGMK_TK30 (pPCMV-mGMK_TK30).
  2. Ganciclovir (GCV) in concentrations 0, 10 and 100 μg/mL was added to the cell cultures.
  3. After 5 days of cultivation, a Hoechst dye (0.4 μg/mL) and a SytoxGreen514 dye (1 μM) were used to stain cells and discriminate between alive and dead cells.
  4. Cells were incubated for approximately 10 minutes in dark at 37 °C before being imaged.
  5. A 405-nm diode laser was used to excite Hoechst and a 514-nm line of 25 mW multi ion argon laser was used to excite SytoxGreen514. Successive images excited at 405 and 514 nm were captured. Fluorescence emission was detected at 450-500 nm and 520-560 nm for Hoechst and SytoxGreen respectively.

Microscopy-cell growth (Safety mechanisms)

  1. HEK293 cells were seeded in an 8-well microscope chamber and transfected with 100 ng CMV-mGMK_TK30 (pPCMV-mGMK_TK30) and/or 20 ng mCitirne (pPCMV-mCitrine) (a transfection control).
  2. Ganciclovir (GCV) in concentrations 0, 10 and 100 μg/mL was added to the cell cultures.
  3. After 5 days of cultivation, a cell cultures were imaged.
  4. A 514-nm line of 25 mW multi ion argon laser was used to excite mCitrine reporter protein. Fluorescence emission was detected at 520-560 nm for mCitrine. Bright field images were used to visualize number of cells.

Microscopy-cell count (Safety mechanisms)

  1. HEK293 cells were seeded in 12-well plates and transfected with and transfected with 100 ng CMV-mGMK_TK30 (pPCMV-mGMK_TK30).
  2. Cell cultures were treated with ganciclovir (GCV) in concentrations as indicated in figure legend.
  3. After incubation the cells were resuspended by pipetting.
  4. Cells suspension was then mixed with trypan blue.
  5. Viable cell number was determined by counting the cells under a light microscope using Bürker-Türk counting chamber.

Microscopy-detection of reporter proteins (The Switch)

Reporters such as fluorescent proteins were used to detect expression of efektor in "The switch experiments". As reporters we used blue (tagBFP), yellow (mCitrine), orange (mCherry) and red fluorescent proteins (mNeptun). mCherry was used as transfection control, the others were used as reporters of "the switch".

  1. HEK293T cells were seeded in an 8-well microscope chamber or 12-well plate and transfected with plasmids for the switch. Plasmids and amount used for transfection are listed in Figure legends.
  2. Two hours after transfection, media was changed and cells were stimulated with inducers. Inducers and their concentration are described in Figure legends.
  3. Media supplemented with inducer or without inducer were changed after two days cultivation.
  4. Images of cells expressing reporters were taken two days after transfection and inducers addition and then each day for 5 days.
  5. A 405-nm diode laser was used to excite tagBFP, a 514-nm line of 25 mW multi-ion argon laser was used for mCitirne, a 543-nm HeNe laser was used for mCherry and a 633-nm HeNe laser was used to excite mNeptune. Successive images excited at 405, 514, 543 and 633 nm were captured. All intensities of laser and photomultipliers were kept unchanged during set of experiment to enable comparison of images. Fluorescence emission was detected at 450-500 nm, 520-560 nm, 560-600 nm and 640-700 nm for tagBFP, mCitrine, mCherry and mNeptune, SytoxGreen respectively.

Microscopy-alginate degradation (Microencapsulation)

To observe alginate beads degradation, 2000 kDa FITC-dexstran (Sigma) was added to 200 µL of culture medium containing alginate beads with immobilized HEK 293T cells. Because FITC-dexstran cannot penetrate into algnate beads, we can easily observe bead degradation uppon addition of alginate lyase from Sphingobacterium multivorum (Sigma).

  1. Alginate beads suspended in culture medium were seeded into an 8-well microscope chamber (200 µL).
  2. 20 µL of 1 mg/mL FITC-dextran were added into well.
  3. After the dye has been evenly distributed throughout the suspension, 8 µL of Sphingobacterium multivorum alginate lyase were added.
  4. Microscope was set to capture images every 20 seconds.
  5. Screenshots were collected for at least 15 minutes.
  6. A 488-nm line of 25 mW multi-ion argon laser was used for FITC. Fluorescence emission was detected at 520-560 nm. At the same time a bright field image was taken.

Microscopy-encapsulated cells viability (Microencapsulation)

To observe encapsulated cells' viability, HEK 293T cells were dyed with Hoechst and 7-aminoactinomycin D (7-AAD) viability stains. Hoechst stains both living and dead cells, while 7-AAD stains dead cells only.

  1. Encapsulated cells were grown in DMEM culture medium supplemented with 10% FBS.
  2. 200 µL of microcapsule suspension were collected and alginate-PLL capsules were seeded into an 8-well microscope chamber.
  3. 5 µL of 7-AAD and 1 µL of Hoechst stain were added into well.
  4. Encapsulated cells were protected from direct light and stained for 30 min at 37 °C.
  5. Microscope chamber was transfered to Leica confocal microscope.
  6. A 405-nm diode laser was used to excite Hoechst and a 543-nm line of HeNe laser was used to excite 7-AAD.
  7. Fluorescence emission was detected at 450-500 nm and 600-700 nm for Hoechst and 7-AAD respectively.


Next: Lablog >>