# Team:Carnegie Mellon/Mod-Derivations

### From 2012.igem.org

Line 493: | Line 493: | ||

<p> | <p> | ||

- | \begin{equation}[P] = Tl \cdot (\frac{T_s \cdot D}{\alpha}\cdot (\frac{1}{\beta}\cdot (1 - e^{-\beta \cdot t}) - \frac{1}{-\alpha + \beta}(e^{-\alpha \cdot t} - e^{-\beta \cdot t}))\end{equation} | + | \begin{equation}[P] = Tl \cdot (\frac{T_s \cdot D}{\alpha}\cdot (\frac{1}{\beta}\cdot (1 - e^{-\beta \cdot t}) - \frac{1}{-\alpha + \beta}(e^{-\alpha \cdot t} - e^{-\beta \cdot t}))) + \epsilon\end{equation} |

</p> | </p> | ||

+ | <p> | ||

+ | \begin {equation} M(Tl, \beta) = \sum^n_{i = 1}[P] - Tl \cdot (\frac{T_s \cdot D}{\alpha}\cdot (\frac{1}{\beta}\cdot (1 - e^{-\beta \cdot t}) - \frac{1}{-\alpha + \beta}(e^{-\alpha \cdot t} - e^{-\beta \cdot t}))))^2\end{equation} | ||

<br> | <br> | ||

<hr \> | <hr \> |

## Revision as of 23:53, 26 October 2012

# Documentation Preface

The documentation of the model consists of the derivations of all the equations used to create the model. Each equation contributes a piece of the picture which ultimately results in the calculations of important cell characteristics. These equations live in the Matlab model that can be found here.
The characteristics we are measuring include transcriptional strength, *Ts * \eqref{eq:eR}, translational efficiency, *Tl * \eqref{eq:Tl}, and Polymerase Per Second, * PoPS* \eqref{eq:PoPS}.

# Experimental Data Analysis

Let fluorescent mRNA and protein concentration be represented by $[R_f]$ and $[P_f]$, respectively. They are related directly to the fluorescence level, which we will label $F_r$ and $F_p$. Thus, we can write

\begin{equation}{F_r = k_r \cdot [R_f]\cdot (S_r)}\end{equation} \begin{equation}{F_p = k_p \cdot [P_f] \cdot (S_p)}\end{equation}where $S_r$ and $S_p$ are scaling factors for mRNA and protein, respectively, and $k_r$ and $k_p$ are constants that transform fluorescence to mRNA and protein concentrations.

In the experiment, one uses a plate reader with varying concentration of the dyes in rows and varying time measurements in columns. The following image represents this.

We will also have another row for * in vitro* measurements. From this row we will graph the fluorescence versus the dye concentration, and the fluorescence will level off at some saturation point. Because the saturation point * in vitro* will be greater than the saturation point * in vivo *, we must scale all the fluorescence measurements we find * in vivo *, which is the importance of $S_r$ and $S_p$.

At this point we will find out the scaling factors $S_r$ and $S_p$. Step 1 is to put samples into the plate reader and take more samples of the same concentration and measure them * in vitro*. Then, we will measure all the wells at the same time point, and find the saturation fluorescence of the * in vitro* and the * in vivo * wells. Dividing the two gives us the $S_r$ and $S_p$.

At each time point we will graph the * in vivo * fluorescence vs. dye concentrations and find the first dye concentration where saturation occurs. This dye concentration is thus the mRNA/protein total concentration, as we will assume that there will be a 1-1 correspondence of dye and mRNA/protein. We then multiply each by the scaling factor $S_r$ or $S_p$ to get the actual mRNA.

# Equilibrium Constants

To check, we can find the fluorescent mRNA concentrations from the mRNA values we obtained in vivo. General first order chemical reactions begin (theoretically):

\begin{equation}\alpha [A] + \beta [B] \leftrightarrow \gamma [AB]\end{equation}where $[AB] = 0$. So then, the equation becomes:

\begin{equation}(\alpha[A] - \gamma [AB]) + (\beta[B] - \gamma [AB]) \leftrightarrow \gamma [AB]\end{equation}

We will assume that $\alpha$, $\beta$, and $\gamma$ are all equal to 1. Our $[A]$ will be mRNA/protein and $[B]$ will be the dye concentrations. mRNA dye, which is DFHBI, will be $[D_D]$ and protein dye, which is malachite green (MG), will be $[D_M]$. Our equations are thus:

\begin{equation}([R]_{i} - [R_f]) + ([D_D] - [R_f]) \leftrightarrow ([R_f])\end{equation} \begin{equation}([P]_{i} - [P_f]) + ([D_M] - [P_f]) \leftrightarrow ([P_f])\end{equation}

The equilibrium constant for RNA, $K_{D_R}$ is then defined as:

\begin{equation}K_{D_R} = \frac{[AB]}{([A]_0 - [AB]) ([B]_0 - [AB])}\end{equation}Now inputting our variables for mRNA expression,

\begin{equation}K_{D_R} = \frac{[R_f]}{([R]_0 - [R_f])([D_R]_0 - [R_f])} \label{eq:8}\end{equation}

we can solve for $[Rf]$ using a quadratic equation based off of \eqref{eq:8}.

\begin{equation}[R_f]^2 \cdot K_{D_R} - [R_f]\cdot [K_{D_R}([R] + D_R) + 1] + K_{D_R} \cdot [R] \cdot {D_R} = 0\end{equation}

\begin{equation}[R_f] = \frac{[K_{D_R}([R][D_R]) + 1] \pm \sqrt{[K_{D_R}([R][D_R]) + 1]^2 - 4 \cdot (K_{D_R}) \cdot (K_{D_R}[R][D_R])}}{2 \cdot K_{D_R}}\end{equation}We can apply the similar procedure for determining the protein concentration.

# Degradation

Degradation occurs for both mRNA and protein. After shutting off production of mRNA/protein, one can measure the degradation coefficient. Some intuition reveals that the amount that is degraded is proportional to the amount of mRNA/protein that is present:

\begin{equation}\frac{d[R]}{dt} = -\alpha \cdot [R]\end{equation}

Protein often has another constant attached to degradation, labeled maturation. Maturation $(a)$ takes into account the time it takes for a protein to mature before fluorescence can actually occur. Maturation is also dependent on the amount of protein available. In this case, the equation would be

\begin{equation}\frac{d[P]}{dt} = -(a + \beta) \cdot [P]\label{eq:12}\end{equation}

However, since the fluorogen activated protein (FAP) takes a small amount of time to fold and to bind to the dye, one can make a reasonable assumption that maturation is 0. So the simplified equation is

\begin{equation}\frac{d[P]}{dt} = -\beta \cdot [P] \label{eq:13}\end{equation}

Equations \eqref{eq:12} and \eqref{eq:13} can be solved by first order linear differential equation techniques:

\begin{equation}[R] = [R]_{max}\cdot e^{-\alpha \cdot t}\end{equation} \begin{equation}[P] = [P]_{max}\cdot e^{-\beta \cdot t}\end{equation}

From these equations $\alpha$ and $\beta$ can be determined easily.

# mRNA Expression

From the mRNA expression equations, we know that

\begin{equation}\frac{d[R]}{dt} = Ts \cdot [D] - \alpha \cdot [R]\end{equation}

where $Ts$ is the transcriptional efficiency and $\alpha$ is the degradation constant associated with mRNA degradation, and $[R]$ is the mRNA concentration or amount.

We see next that this is a first order linear equation, as $Ts$, $[D]$ and $\alpha$ are constants. Rearranging, we get

\begin{equation}\frac{d[R]}{dt} + \alpha \cdot [R] = Ts \cdot [D] \label{eq:e1}\end{equation}

The small integrating factor is thus $e^{\alpha \cdot t}$.

Multiplying the small integrating factor through equation \eqref{eq:e1} (Warning: Math ahead!)

\begin{equation}\frac{d[R]}{dt} \cdot e^{\alpha \cdot t} + \alpha \cdot [R] \cdot e^{\alpha \cdot t} = Ts \cdot [D] \cdot e^{\alpha \cdot t}\end{equation} \begin{equation}\frac{d([R]\cdot e^{\alpha \cdot t})}{dt} = Ts \cdot [D] \cdot e^{\alpha \cdot t}\end{equation} \begin{equation}[R]\cdot e^{\alpha \cdot t} = \int \! Ts \cdot [D] \cdot e^{\alpha \cdot t} \ dt\end{equation} \begin{equation}[R]\cdot e^{\alpha \cdot t} = \frac{Ts \cdot [D]}{\alpha} \cdot e^{\alpha \cdot t} + C \label{eq:e2}\end{equation}At $t = 0$, $[R] = 0$. Plugging into \eqref{eq:e2}, we obtain:

\begin{equation}C = \frac{-Ts \cdot [D]}{\alpha}\end{equation} \begin{equation}[R] \cdot e^{\alpha \cdot t} = \frac{Ts \cdot [D]}{\alpha} \cdot e^{\alpha \cdot t} - \frac{Ts \cdot [D]}{\alpha}\end{equation} \begin{equation}[R] = \frac{Ts \cdot [D]}{\alpha} - \frac{Ts \cdot [D]}{\alpha} \cdot e^{-\alpha \cdot t}\end{equation} \begin{equation}[R] = \frac{Ts \cdot [D]}{\alpha} \cdot (1 - e^{-\alpha \cdot t})\label{eq:eR}\end{equation}$Ts$ is then calculated by

\begin{equation} Ts = \frac{[R] \cdot \alpha}{[D] \cdot (1 - e^{-\alpha \cdot t})}\end{equation}# Protein Expression

The protein model is a bit different from the mRNA model due to the fact that the amount of protein depends on the amount of mRNA, which is variable. mRNA is only dependent on $[D]$, which is invariable.

The basic equation looks like:

\begin{equation}\frac{d[P]}{dt} = [R] \cdot Tl - \beta \cdot [P]\end{equation}where $[P]$ is the protein concentration or amount, $[R]$ is still mRNA, $Tl$ is the translational efficiency, and $\beta$ is the degradation constant associated with the protein.

Conveniently, we have already solved for our only hurdle to a first order linear equation, the mRNA amount (from equation \eqref{eq:eR}). We will substitute in for mRNA now:

\begin{equation}\frac{d[P]}{dt} = (1 - e^{-\alpha \cdot t}) \cdot \frac{Ts \cdot [D]}{\alpha} \cdot Tl - \beta \cdot [P]\end{equation}

Now we can solve the first order linear equation:

\begin{equation}\frac{d[P]}{dt} + \beta \cdot [P] = (1 - e^{-\alpha \cdot t}) \cdot \frac{Ts \cdot [D]}{\alpha} \cdot Tl\end{equation}

It can be seen that the integrating factor is $e^{\beta \cdot t}$ :

\begin{equation}\frac{d[P]}{dt} \cdot e^{\beta \cdot t} + \beta \cdot [P] \cdot e^{\beta \cdot t} = e^{\beta \cdot t} \cdot (1 - e^{-\alpha \cdot t}) \cdot \frac{Ts \cdot [D]}{\alpha} \cdot Tl\end{equation} \begin{equation}\frac{d([P] \cdot e^{\beta \cdot t})}{dt} = e^{\beta \cdot t} \cdot (1 - e^{-\alpha \cdot t}) \cdot \frac{Ts \cdot [D]}{\alpha} \cdot Tl\end{equation} \begin{equation}[P]\cdot e^{\beta \cdot t} = \int \! (1 - e^{-\alpha \cdot t}) \cdot \frac{Ts \cdot [D]}{\alpha} \cdot e^{\beta \cdot t} \cdot Tl\ dt\end{equation} \begin{equation}[P]\cdot e^{\beta \cdot t} = Tl \cdot \int \! \frac{Ts \cdot [D]}{\alpha} \cdot e^{\beta \cdot t} \ dt - Tl \cdot \int \!\frac{Ts \cdot [D]}{\alpha} \cdot e^{(-\alpha + \beta) \cdot t} \ dt\end{equation} \begin{equation}[P] \cdot e^{\beta \cdot t} = Tl \cdot \frac{Ts \cdot [D]}{\alpha \cdot \beta} \cdot e^{\beta \cdot t} - Tl \cdot \frac{Ts \cdot [D]}{\alpha \cdot (-\alpha + \beta)} \cdot e^{(-\alpha + \beta) \cdot t} + C \label{eq:34}\end{equation}Now we solve for C. When $t = 0$, $P = 0$ :

\begin{equation}C = -Tl \cdot \frac{Ts \cdot [D]}{\alpha} \cdot (\frac{1}{\beta} - \frac{1}{-\alpha + \beta})\end{equation}Substituting into \eqref{eq:34}, we obtain: \begin{equation}[P] \cdot e^{\beta \cdot t} = Tl \cdot \frac{Ts \cdot [D]}{\alpha \cdot \beta} \cdot e^{\beta \cdot t} - Tl \cdot \frac{Ts \cdot [D]}{\alpha \cdot (-\alpha + \beta)} \cdot e^{(-\alpha + \beta) \cdot t} - Tl \cdot \frac{Ts \cdot [D]}{\alpha} \cdot (\frac{1}{\beta} - \frac{1}{-\alpha + \beta}) \end{equation}

FInally, we solve for Tl. Tl is the translational efficiency, which is the second characteristic we were trying to solve for:

\begin{equation}Tl = \frac{[P]}{\frac{Ts \cdot [D]}{(\alpha \cdot \beta)} \cdot (1 - e^{-\beta \cdot t}) - \frac{Ts \cdot [D]}{\alpha \cdot (-\alpha + \beta)} \cdot (e^{-\alpha \cdot t} - e^{-\beta \cdot t})} \label{eq:Tl}\end{equation}The following figures show that our model described above, and the parameters that we obtained fit well the measured fluorescence for the wild type (WT) promoter and three new promoters (Mutants 1,2, and 3).

# Polymerase Per Second

Taking inspiration from ”Measuring the activity of BioBrick promoters using an *in vivo* reference standard” by Kelly et al.^{[1]}, we can derive our own equation
for polymerase per second (PoPS), as follows.

mRNA is produced by the number of promoters times the rate of initiations of polymerase onto the promoters, or $n \cdot PoPS$. mRNA is degraded by the degradation equation we derived earlier, which is $-\alpha \cdot [R]$ :

\begin{equation}\frac{d[R]}{dt} = n \cdot PoPS - \alpha \cdot [R] \label{eq:Po1}\end{equation}

where $n$ is the number of promoters in a cell, PoPS is the rate of initiations of RNA polymerase onto the promoters.

Protein is produced by the translational efficiency times the mRNA, which is $[R] \cdot Tl$. Protein is degraded by the degradation equation we derived above, which is $-\beta \cdot [P]$ :

\begin{equation}\frac{d[P]}{dt} = [R] \cdot Tl - \beta \cdot [P] \label{eq:Po2}\end{equation}

At steady state, it can be assumed that $d[R] = 0$ and $d[P] = 0$.

So simplifying \eqref{eq:Po1} and \eqref{eq:Po2}, we obtain:

\begin{equation}PoPS = \frac{\alpha \cdot [R]}{n}\end{equation}Substituting leaves:

\begin{equation}PoPS = \frac{\alpha \cdot \beta \cdot [P]}{n \cdot Tl} \label{eq:PoPS}\end{equation}

The output of the model is polymerase per second, which is what we have found here. It is important to realize that the purpose of finding polymerase per second is that for the current environment of a promoter and the specific type of promoter, it can be characterized using polymerase per second. Experiments can thus easily be conceived by running two experiments on the same promoter under different conditions to see how a promoter is affected, or by running two experiments on different promoters under the same conditions to see which is a stronger promoter.

# Fitting

With the data we were given, we decided to fit the equations we derived to the data. We used a method of gradient descent to minimize the error from our fits. We began by trying to fit the transcriptional strength equation, equation \eqref{eq:eR}. We defined our fitting function, $R_i$, in terms of our equation for transcriptional strength, \eqref{eq:eR}, as well as some error $\epsilon$. Since the experimental data was taken in discrete time, we took each point for RNA to be $R_i$ and each point for time to be $t_i$.

\begin{equation}R_i = f(t_i) + \epsilon\end{equation}

\begin{equation}R_i = \frac{T_s}{\alpha} \cdot D \cdot (1 - e^{-\alpha \cdot t_i}) + \epsilon\end{equation}

\begin{equation}R_i = \frac{T_s}{\alpha} \cdot D - \frac{T_s}{\alpha} \cdot D \cdot e^{-\alpha \cdot t_i} + \epsilon\end{equation}

$D$ represents the concentration of DNA, and we are looking for $T_s$ and $\alpha$ as the outputs from our fitting model.We want to minimize our error. To do this, we will use a common method called the method of least squares. We define our error function to be $L(T_s, \alpha)$.

\begin{equation}L(T_s, \alpha) = \sum^n_{i = 1}(R_i - f(t_i))^2\end{equation}

\begin{equation}L(T_s, \alpha) = \sum^n_{i = 1}(R_i - (\frac{T_s}{\alpha} \cdot D - \frac{T_s}{\alpha} \cdot D \cdot e^{-\alpha \cdot t_i}))^2\end{equation}

Now we use a method called gradient descent. This function, over the course of many trials, increments the variables, in our case $T_s$ and $\alpha$, such that the variables gradually approach acceptable values for a fitted function. To do this, we take the derivative of our error function with respect to both our variables, $T_s$ and $\alpha$.

\begin{equation}\frac{\delta L}{\delta T_s} = \sum^n_{i = 1}(2\cdot(R_i - \frac{T_s}{\alpha} \cdot D - \frac{T_s}{\alpha} \cdot D \cdot e^{-\alpha \cdot t_i} \cdot ( -\frac{D}{\alpha} + \frac{D}{\alpha} \cdot e^{\alpha \cdot t_i})))\end{equation}

\begin{equation} \begin{split}\frac{\delta L}{\delta \alpha} = \sum^n_{i = 1}(2 \cdot (R_i - \frac{T_s}{\alpha} \cdot D + &\frac{T_s}{\alpha}\cdot D \cdot e^{-\alpha \cdot t_i})\cdot \\&(\frac{T_s \cdot D}{\alpha^2} - \frac{T_s \cdot D}{\alpha^2} \cdot e^{-\alpha \cdot t_i} + \frac{T_s}{\alpha} \cdot D \cdot e^{-\alpha \cdot t_i}\cdot (-t_i)))\end{split}\end{equation}

From here, we begin incrementing $T_s$ and $\alpha$ for a number of trials.

\begin{equation}T^{k + 1}_s = T^k_s + \eta \cdot \frac{\delta L}{\delta T^k_s}\end{equation} for k = 1... K.

$\eta$ is a term often called "learning rate" in machine learning, but which we will call step size. It is called thusly due to the fact that $T_s$ and $\alpha$ are incrementing a different amount every time based on the closeness of the fit for each trial. In this sense, the variables could be seen as "learning" where the optimal fitting values are and changing their increments accordingly.

We can do a similar equation for $\alpha^{k + 1}$.

\begin{equation}\alpha^{k + 1} = \alpha^k + \eta \cdot \frac{\delta L}{\delta \alpha ^k}\end{equation} for k = 1...K.

The final values, $T^K_s$ and $\alpha^K$ are the parameters we are looking for in our fitting function.

For our translational efficiency model, we performed the same set of methods to get our fit. We first defined our fitting function, $M(Tl, \beta)$.

\begin{equation}\begin{split}[P] = Tl \cdot \frac{T_s \cdot D}{\alpha \cdot \beta} - Tl \cdot \frac{T_s \cdot D}{\alpha \cdot (-\alpha + \beta)} \cdot e^{-\alpha \cdot t} - &Tl \cdot \frac{T_s \cdot D}{\alpha \cdot \beta} \cdot e^{-\beta \cdot t} \\&+ Tl \cdot \frac{T_s \cdot D}{\alpha \cdot (-\alpha + \beta)} \cdot e^{-\beta \cdot t} + \epsilon \end{split}\end{equation}

\begin{equation}[P] = Tl \cdot (\frac{T_s \cdot D}{\alpha}\cdot (\frac{1}{\beta}\cdot (1 - e^{-\beta \cdot t}) - \frac{1}{-\alpha + \beta}(e^{-\alpha \cdot t} - e^{-\beta \cdot t}))) + \epsilon\end{equation}

\begin {equation} M(Tl, \beta) = \sum^n_{i = 1}[P] - Tl \cdot (\frac{T_s \cdot D}{\alpha}\cdot (\frac{1}{\beta}\cdot (1 - e^{-\beta \cdot t}) - \frac{1}{-\alpha + \beta}(e^{-\alpha \cdot t} - e^{-\beta \cdot t}))))^2\end{equation}

^{[1]}
Kelly, Jason R., Adam J. Rubin, Joseph H. Davis, Caroline M. Ajo-Franklin, John Cumbers, Michael J. Czar, Kim De Mora, Aaron L. Glieberman, Dileep D. Monie, and Drew Endy. "Measuring the Activity of BioBrick Promoters Using an in Vivo Reference Standard." Journal of Biological Engineering 3.1 (2009): 4. Print.