We chose to represent the bioreactor as an infinitely long cylinder. This allows us to consider the problem in two dimensions, yet should stay realistic (the bioreactor will normally be at least twice longer than its radius, this model should quite accurately represent what's happening in the middle). From literature [cite!], we know that LovTAP saturates at 200W/cm^2 (note: lower intensities should still work, as saturation isn't necessary, we just want a significant proportion to be activated, but this should keep things easier to calculate).

The results are displaed in a picture at the bottom of the page. Everything that is dark red is fully saturated, but everything between red and green should be enough. The places where the picture is blue represent parts that aren't illuminated enough. However, as the activated LOV-domain has a half-life of 30-40s (and our protein's half-life should be quite close to this), and the bioreactor is orbitally shaken (which results in chaotic movement, meaning every cell has a quasi-uniform probability of coming anywhere in the bioreactor), the only thing that matters is that the coverage is high enough (note: high enough depends on several parameters such as the shaker speed).

Please play with our tool! (If you're unsure about the settings, just click run to use sane defaults).