"
Bio-electric Interface
Microbial half fuel cells
Methods
- Fuel cells were constructed using carbon weave electrodes and reference electrodes provided by Matthew Knighton from Dr Bruce Ward’s lab.
- Fuel cells were assembled by using a bottle cap with an attached carbon weave electrode to seal 500 or 250 ml standard glass bottles. The electrodes were attached to the caps using silicone sealant. Bottles were then autoclaved. In sterile conditions, reference electrodes were dipped in alcohol, inserted into the cap of the bottles and sealed with silicon sealant. The half fuel cells were then filled with media, inoculated with bacteria and sealed with parafilm in order to ensure anaerobic growth. The bacteria were left to grow at room temperature. (Figure 1)
- Media used: standard LB or M9 (minimal growth medium) supplemented with 0,4% glycerol or sodium acetate.
- Measurements were obtained using a digital multimeter.
Results
- We have examined the behaviour of S. oneidensis and E. coli in different media using half fuel cells. We managed to obtain results using the following media: LB, M9 with glycerol and M9 with sodium acetate. The results are summarised in figures 2 and 3 below. We also performed a measurement for Citrobacter freundii to see whether it differs from other bacteria.
Figure 1: Our microbial half fuel cells with S. oneidensis and E. coli
Figure 2: Half fuel cells experiments 1 and 2, using LB medium for growth of S. oneidensis and E. coli. Experiment 1 (left) was performed using 500 ml of medium while experiment 2 (right) was performed using 250 ml of medium.
Figure 3: Half fuel cells experiments 3 and 4, using M9 medium for growth of S. oneidensis, E. coli and Citrobacter freundii. Experiment 3 (left) was performed using 250 ml of medium M9 with 0,4% glycerol while experiment 4 (right) was performed using 250 ml of medium M9 with 0,4% sodium acetate. In experiment 4, C. freundii was also tested.
Acknowledgements
We would like to thank Dr Bruce Ward and Matthew Knighton for their help with the fuel cells and for lending us their lab equipment.
1. Jensen, H. M., Albers, A. E., Malley, K. R., Londer, Y. Y. , Cohen, B. E., Helms, B. A., Weigele, P., Groves, J. T. & Ajo-Franklin, C. M. (2010). Engineering of a synthetic electron conduit in living cells. PNAS 107, 19213-19218
2. Stewart, V., Lu, Y. & Darwin, A. J. (2002). Periplasmic Nitrate Reductase (NapABC Enzyme) supports Anaerobic Respiration by Escherichia coli K-12. Journal of Bacteriology 184, 1314-1323
3. Marritt, S. J., Lowe, T. G., Bye, J., McMillan, D.G.G., Shi, L., Frederickson, J., Zachara, J., Richardson, D. J., Cheesman, M. R., Jeuken L.J.C. & Butt, J. N. (2012). A functional description of CymA, an electron-transfer hub supporting anaerobic respiratory flexibility in Shewanella. Biochemical Journal 444, 465-474
4. Richter, K., Schicklberger, M., Gescher, J. (2011). Dissimilatory reduction of extracellular electron acceptors in anaerobic respiration. Applied and Environmental Microbiology 78, 913-921
Close bibliography.
