Team:NRP-UEA-Norwich/NOSensing

From 2012.igem.org

Revision as of 15:35, 26 September 2012

Welcome to the NRP UEA iGEM 2012 Wiki Projects Menu

Please choose the relevant link to view an overview of each project!

Nitric Oxide Sensing & The Hybrid Promoters | The Comparator Circuit | Theoretical Projects

Parts produced from this project:

[http://partsregistry.org/wiki/index.php?title=Part:BBa_K774000 Bacterial-Mammalian/B-M (PyeaR-CArG) Hybrid Promoter] -- [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774001 Mammalian-Bacterial/M-B (CArG-PyeaR) Hybrid Promoter] -- [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774004 B-M + eCFP] -- [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774005 B-M + RFP] -- [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774006 M-B + eCFP] -- [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774004 M-B + RFP]

Our main project has resulted in the production of a hybrid bacterial and mammalian promoter optimised for induction by nitric oxide, nitrates and nitrites. We have ligated PyeaR, a known bacterial promoter and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K216005 Part BBa_K216005] (Cambridge 2009) in the parts registry, with its mammalian counterpart, CArG. The resulting hybrid promoter has been synthesised in two orientations; PyeaR (bacterial, B) upstream of CArG (mammalian, M), nicknamed (B-M); and CArG upstream of PyeaR (M-B). These orientations were submitted to the parts registry as our first two biobricks.

Each orientation of the promoter was ligated to enhanced cyan fluorescent protein (eCFP) and red fluorescent protein (RFP) to produce four new biobricks which have been submitted to the parts registry. These promoter + fluorescent protein biobricks have been characterised following transformation into Escherichia coli and induction by potassium nitrate using methods such as flow cytometry, fluorescence-activated cell sorting (FACS) and scanning with a fluorometer. The data from these experiments has proved that our promoter works as we expected it to. We have also transfected M-B + eCFP into a human breast cancer cell line, MCF7, and have proved the system is flexible and can be used in both eukaryotes and prokaryotes.

We believe the promoters we have produced have relevant uses in cancer therapeutics, soil fertilisation and detection of emissions from industries such as construction.

Introduction

Figure 1. A graphical representation of PyeaR. In the higher image PyeaR's activity is being repressed by both Nar and NsrR preventing transcription and the ultimate expression of a reporter. In the lower image nitrate/nitrite molecules have inhibited the activity of Nar, and nitric oxide has inhibited activity of NsrR, allowing for transcription to occur and subsequent expression of a reporter.

The University of East Anglia hosts many research teams whose work focuses on studying nitrogenous species and the way in which bacteria use and modify those species. One major problem that is faced by these teams involves working with nitric oxide (NO), as NO is highly reactive with a low half life, therefore making it difficult to trace and quantitatively measure accurately. Many of the methods currently used to measure NO levels are unable to distinguish between homogenous species, such as nitrates (NO3) and nitrites (NO2), therefore the figure given for NO levels is often inaccurate as other nitrogenous species are taken into account.

The ability to be able to accurately detect NO levels is one with a great deal of potential for the future. Nitric oxide has been noted as a possible cancer therapy due to its physiological use as an apoptosis inducer by macrophages, however NO is also known to be used by cancerous cells to establish a baseline and use it to induce apoptosis and promote proliferation of a tumour; being able to accurately sense nitric oxide and go on to act on that information could be very useful to prevent the NO baseline being established by cancerous cells, but to also use NO for its apoptosis-inducing abilities. There are also other potential applications in the construction business, in 2008 NEED TO FIND REFERENCE OF PEOPLE released legislation encouraging construction companies to monitor their NO output as it is inversely proportional to carbon monoxide (a toxic substance which needs to be regulated); the ability to accurately detail levels of NO being released in these circumstances would be highly useful.

Nitric oxide is an extremely physiologically relevant molecule found within both eukaryotes and prokaryotes, where it is utilised by different enzymes and systems for various roles. The aim of the experiment was to devise a hybrid promoter that could be applied to eukaryotes and prokaryotes in order to begin to more accurately sense NO and report on its specific levels.

Figure 2. A graphical representation of the hybrid promoter in its two orientations; the top image shows B-M with the bottom image showing M-B. Also included are the restriction sites and their location within the system, with the elements being read from left to right.

The hybrid promoter was designed to take on both bacterial and mammalian elements in order to be compatible with both bacterial and mammalian cells. After research around the subject and searching the parts registry a promoter known as PyeaR was decided upon as the bacterial element of the hybrid promoter; PyeaR is found in the yeaR/yoaG operon of Escherichia coli and is associated with induction by nitric oxide, nitrates and nitrites (Lin et al., 2007). PyeaR is repressed by two main repressors; Nar, which is regulated by nitrates and nitrites; and NsrR, which is regulated by nitric oxide (Figure 1.). One of the key elements of PyeaR is that it is not repressed in aerobic conditions, allowing for easier carrying out of experiments. The PyeaR aspect of the hybrid promoter has been known throughout the project as the bacterial promoter, or simply B.

The mammalian element of the hybrid promoter was produced by nine CArG elements (repeated elements of CC(A/T)(6)GG), a promoter previously used synthetically for nitric oxide synthase as a cancer therapy (Worthington et al., 2005) and developed from the EGR1 gene for early growth response protein 1 (Scott et al., 2002). The CArG aspect of the hybrid promoter has been known throughout the project as the mammalian promoter, or simply M.

Following identification of the two elements of the hybrid promoters the B (PyeaR) and M (CArG) aspects were ligated to one another in two orientations; B upstream of M (B-M) and M upstream of M (M-B) (Figure 2.). The hybrid promoters were synthesised in a pUC57 backbone with the standard iGEM restriction sites of EcoR1/Xba1 upstream of the promoter, and Spe1/Pst1 downstream of the promoter. A BamH1 restriction site was included in between the B and M sequences in order to allow for the B and M elements to be separated, as well as for easy verification of the promoter having been ligated into the iGEM backbone in future experiments (as BamH1 does not already exist in the pSB1C3 backbone).

Characterisation of Existing Biobrick: BBa_K381001 (PyeaR + GFP biobrick)

In order to begin to develop experiments to characterise the hybrid promoters + fluorescent proteins experiments were also carried out on a biobrick containing PyeaR + GFP (Part [http://partsregistry.org/Part:BBa_K381001 BBa_K381001], Bristol 2010). In these experiments transformed E. coli was inoculated into liquid culture, which in turn had varying potassium nitrate concentrations added to it. They were then left to grow before being spun down and viewed under a UV box in order to observe. The different concentrations of potassium nitrate that the transformed E. coli was grown in were: 0 mM, 1 mM, 2 mM, 3 mM, 4 mM, 5 mM, 6 mM, 8 mM, 10 mM.

Figure 3. A photograph of spun-down media containing potassium nitrate (to induce the promoter) and E. coli transformed by PyeaR + GFP (art BBa_K381001). Each sample was grown with a different concentration of potassium nitrate, from left to right: 0 mM, 1 mM, 2 mM, 3 mM, 4 mM, 5 mM, 6 mM, 8 mM, 10 mM.

The figure suggests that fluorescent proteins have been expressed by the bacteria grown in media containing potassium nitrate due to the fluorescence shown under the UV box. It also suggests that different concentrations of potassium nitrate correlate with different intensities of expression due to the observable differences in fluorescence as the tubes are viewed from left to right, going up the gradient. The negative control of 0 mM potassium nitrate appears to show no fluorescence, suggesting it is indeed the potassium nitrate that is inducing the promoter.

Creating Novel Hybrid Promoters: B-M and M-B into Biobricks

The DNA for the synthesised genes of B-M and M-B had been supplied in the pUC57 backbone, therefore it was necessary for B-M and M-B to be digested from the pUC57 backbone and ligated into the pSB1C3 backbone. The synthesised gene was transformed into competent ’’E. coli’’ cells, which in turn were grown on agar plates containing 100 µg/ml ampicillin (due to pUC57 containing ampicillin resistance); colonies that had grown were then inoculated into liquid culture, and the liquid culture was subsequently mini-prepped using either the Bioline ISOLATE Plasmid DNA Mini Kit or the Promega Wizard® Plus SV Minipreps DNA Purification System. The DNA that had been extracted through mini-preps and the pSB1C3 backbone, as provided by the iGEM registry, were then digested using EcoR1 and Pst1 and a ligation was carried out using standard assembly protocol. The product of ligation was then transformed into competent E. coli cells, which were grown on agar plates containing 2.5 µg/ml chloramphenicol (due to pSB1C3 containing chloramphenicol resistance); this was done to eliminate any bacteria that had been transformed with undesirable ligation products.

The colonies that had grown were then grown in liquid culture and mini-prepped in order to extract the DNA; the extracted DNA was then sent for sequencing, and the returned sequenced matched the expected sequence. The DNA was then sent to the parts registry as the [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774000 Bacterial-Mammalian Hybrid Promoter] and the [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774001 Mammalian-Bacterial Hybrid Promoter]. The biobricks for B-M and M-B were then used for further experiments, including ligation with a fluorescent protein reporter and growth studies.

From weeks one through to five the team worked on producing the first biobricks of the hybrid promoter. Despite this proving difficult due to various reasons such as low amounts of DNA being produced from early mini-preps and ligation strategies not working, E. coli transformed by the biobrick DNA was successfully grown and proven to have the relevant antibiotic resistance by the beginning of week six.

Studies into the effect of the hybrid promoter on growth of E. coli competent cells

Figure 4. A calibration curve produced using E. coli alpha cells grown over time. The inoculations were run through a spectrophotometer at OD 600 nm every hour and then a sample was plated in order to calculate CFU/ml over time.

As part of the characterisation of the hybrid promoters, as well as PyeaR alone ([http://partsregistry.org/wiki/index.php?title=Part:BBa_K216005 Part BBa_K216005], studies were conducted to see if the growth of the E. coli was affected by transformation of the promoters.

To being untransformed E. coli were inoculated into liquid culture and left to grow overnight at 37 ºC before being diluted down. The diluted liquid cultures were run through a spectrophotometer at OD 600 nm and their absorbance noted, before each culture was plated and once again left overnight at 37 ºC; the next morning the colonies on the plates were counted, allowing a calibration curve of absorbance at OD 600 nm against colony-forming units per ml (CFU/ml) to be set up (Figure 3.)

Following establishment of the calibration curve liquid cultures were made up of E. coli that was:

. Untransformed (otherwise referred to as alpha cells)

. Transformed by B-M

. Transformed by M-B

. Transformed by PyeaR

These cultures were then diluted down to the same starting level (an OD 600 nm absorbance of 0.2 +/- 0.1) and cuvettes filled with LB media were inoculated. The cuvettes were then placed in a spectrophotometer every hour and the absorbance at 600 nm was established; in between readings the cuvettes were placed into a 37 ºC incubator in order to encourage bacterial growth. This was repeated for 12 hours and the absorbance readings compared to the calibration curve in order to give data on the level of growth of E. coli transformed with the different promoters/untransformed over time.

Generation of B-M and M-B with eCFP and RFP

In order to test the activity of the hybrid promoters a reporter needed to be ligated. As the hybrid promoter did not already contain a ribosome binding site (RBS) both the RBS and the reporter were needed to be ligated to the promoter; in order to help improve experimental efficiency the parts registry was searched for relevant reporters that also contained an RBS. In week three two reporters were identified as [http://partsregistry.org/Part:BBa_E0420 BBa_E0420], a biobrick for enhanced CFP (eCFP) + RBS + terminators, and [http://partsregistry.org/Part:BBa_K081014 BBa_K081014], a biobrick for RFP + RBS + terminators.

Once the B-M and M-B biobricks had been created in week six work began in earnest on the fluorescent proteins and ligating the promoters to them in order to begin characterisation. Due to many set-backs with low levels of DNA and having to order more biobricks from the registry, a successful ligation of the promoter to a fluorescent protein reporter was finally achieved in week ten. In order to carry out the ligation the promoter was first digested using Spe1 and Pst1 in order to linearise the backbone downstream of the promoter; the fluorescent proteins were digested using Xba1 and Pst1 in order to remove the insert. A ligation was then carried out using standard assembly protocol and the ligation products were transformed into E. coli competent cells, which in turn were grown on agar plates 2.5 µg/ml chloramphenicol (due to pSB1C3 containing chloramphenicol resistance).

In order to quickly identify colonies of bacteria containing the promoter, RBS and reporter in a likely correct sequence a range of colonies were inoculated into media also containing potassium nitrate (KNO3) solution; this was done in order to inhibit the Nar repressor in PyeaR and result in activation of the promoter/induction of transcription/expression of the fluorescent protein reporter. Samples of the inoculated media containing KNO3 were then added to an eppendorf and spun down to form a pellet, which was viewed under a UV box and observed for fluorescence. After a week of various ligation and transformation experiments both promoters were successfully ligated to both fluorescent proteins and fluorescence of eCFP and RFP was observed under a UV box.

From these experiments four more biobricks were produced and submitted to the registry: [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774004 B-M + eCFP], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774005 B-M + RFP], [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774006 M-B + eCFP], and [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774004 M-B + RFP].

In order to characterise the hybrid promoters ligated to fluorescent proteins a number of experiments were carried out to measure the level of fluorescent output at different concentrations of KNO3 (used to induce the promoter's activity). All of these experiments were carried out in week eleven

Qualitative Results

Figure 5. A photograph of spun-down media containing potassium nitrate (to induce the hybrid promoters) and E. coli transformed by M-B + eCFP. The concentrations of potassium nitrate added to the media were, from left to right: 100 mM, 50 mM, 10 mM, 0 mM.

This figure appears to show fluorescence from the spun-down pellets of each hybrid promoter + fluorescent protein that had been grown in media contain potassium nitrate; it can be inferred from this that the potassium nitrate has induced the hybrid promoter, resulting in expression of the fluorescent protein reporter. The negative control of 0 mM potassium nitrate appears to show no fluorescence, suggesting it is indeed the potassium nitrate that is inducing the promoter.

Figure 6. A photograph of spun-down media containing potassium nitrate (to induce the hybrid promoters) and E. coli transformed by the four biobricks containg the promoters and fluorescent proteins; the photograph has been taken from a UV box. From left to right: B-M + eCFP, M-B + eCFP, B-M + RFP, M-B + RFP.

The figure appears to show fluorescence from the spun-down pellets of each hybrid promoter + fluorescent protein that had been grown in media contain potassium nitrate; it can be inferred from this that the potassium nitrate has induced the hybrid promoter, resulting in expression of the fluorescent protein reporter.

Fluorometer Experiments

The main characterisation of the biobricks was carried out using a fluorometer. Five tubes of media containing 200 µL transformed bacteria and potassium nitrate were grown for each biobrick in concentrations as follows:

. B-M + RFP with 0 mM, 5 mM, 10 mM, 15 mM and 20 mM potassium nitrate

. B-M + eCFP with 0 mM, 5 mM, 10 mM, 15 mM and 20 mM potassium nitrate

. M-B + RFP with 0 mM, 5 mM, 10 mM, 15 mM and 20 mM potassium nitrate

. M-B + eCFP with 0 mM, 5 mM, 10 mM, 15 mM and 20 mM potassium nitrate

The samples were then spun down in a centrifuge and resuspended in Tris buffer before being subjected to sonication in order to lyse the cells. The resulting solution was then spun down in a centrifuge again before the supernatant was extracted (in order to separate the proteins from the rest of the cell). The supernatant was then run through a fluorometer in order to measure the intensity of fluorescence as a method to gauge the activity of the hybrid promoters. RFP-containing samples were excited with a wavelength of 560 nm and the emission measured from 600 – 650 nm; eCFP-containing samples were excited with a wavelength of 410 nm and emission measured from 440-490 nm.

These characterisation experiments gave rise to the characterisation which is now available on the main page for all hybrid promoter + fluorescent protein parts on the registry, and the experience section of the hybrid promoters alone on the registry.

Figure x. A graph of the intensity of CFP fluorescence at different wavelengths ranging from 440 - 500 nm where the samples were excited at 410 nm. The samples of E. coli were transformed by the B-M + CFP biobrick and grown overnight in different concentrations of potassium nitrate (0 mM, 5 mM, 10 mM, 15 mM and 20 mM) before being lysed in order to release proteins from the cells for fluorometer analysis.

The graph above shows the flourescence measured from the expression of eCFP due to the response of the bacterial-mammalian promoter to different concentrations of potassium nitrate. The wavelength reading which corresponds to eCFP is between 440-500nm. The graph clearly demonstrates that between 0mN and 15mM there is a proportional relationship between fluorescence intensity and potassium nitrate concentration. There appears to be a sharp increase in fluorescence intensity between 5mM and 10mM, and the rate at which intensity increase gradually decreases so that there is only a small increase between 15mM and 20mM.

Figure x. A graph of the intensity of CFP fluorescence at different wavelengths ranging from 440 - 500 nm where the samples were excited at 410 nm. The samples of E. coli were transformed by the M-B + CFP biobrick and grown overnight in different concentrations of potassium nitrate (0 mM, 5 mM, 10 mM, 15 mM and 20 mM) before being lysed in order to release proteins from the cells for fluorometer analysis.

The graph above shows the flourescence measured from the expression of eCFP due to the response of the mammalian-bacterial promoter to different concentrations of potassium nitrate. The wavelength reading which corresponds to eCFP is between 440-500nm. The graph clearly demonstrates that between 0mN and 15mM there is a proportional relationship between fluorescence intensity and potassium nitrate concentration. It can be noted that at a 20mM concentration the intensity of fluorescence sharply decreases back down to the level of 5mM potassium nitate concentration. This may be due to the cell overexpressing eCFP up to the point at which the excess protein begins to form inclusion bodies which can no longer fluoresce; alternatively, this could be due the potassium nitrate concentration reaching the critical concentration at which it becomes toxic to the cell. This data differs to the readings taken from the bacterial-mammalian promoter ligated to eCFP, as well as the hybrid promoters to RFP, which may suggest there is a difference in the molecular mechanisms that these promoters function by; however at this point the change in intensity at 20mM is inconclusive and is an area which we would like to look into further.

Figure x. A graph comparing the intensity of CFP fluorescence at 475 nm where the samples were excited at 410 nm. The samples of E. coli were transformed by the B-M + CFP biobrick and grown overnight in different concentrations of potassium nitrate (0 mM, 5 mM, 10 mM, 15 mM and 20 mM) before being lysed in order to release proteins from the cells for fluorometer analysis.

We were initially unsure of the effect that the orientation of the bacterial (pYEAR) and the mammalian (CaRG) genes would have in gene expression, therefore we synthesised two hybrid promoters in the orientation bacterial-mammalian and mammalian-bacterial. The graph above compares the intensity of fluorescence of the two hybrid promoters (BBa_K774004 and BBa_K774006) ligated to eCFP. There is a distinct difference between the intensity of fluorescence produced by the bacterial-mammalian promoter and the mammalian-promoter which is something that we would like to look into further. It is particularly interesting that at an intensity of 109a.u. the mammalian-bacterial promoter returns to the same level of intensity as the apparent maxiumum of the bacterial-mammalian promoter at 40a.u.

We also ligated both of our hybrid promoters to Red Fluorescent Protein (RFP), and the results can be seen below.

Figure x. A graph of the intensity of RFP fluorescence at different wavelengths ranging from 600 - 650 nm where the samples were excited at 560 nm. The samples of E. coli were transformed by the B-M + RFP biobrick and grown overnight in different concentrations of potassium nitrate (0 mM, 5 mM, 10 mM, 15 mM and 20 mM) before being lysed in order to release proteins from the cells for fluorometer analysis.

The graph above shows the flourescence measured from the expression of RFP due to the response of the bacterial-mammalian promoter to different concentrations of potassium nitrate. The wavelength reading which corresponds to RFP is between 600-650nm. The graph clearly demonstrates that between 0mN and 15mM there is a proportional relationship between fluorescence intensity and potassium nitrate concentration. A similar pattern can be seen here as for the mammalian- bacterial promoter with eCFP as at a 20mM concentration the intensity of fluorescence sharply decreases, however the intensity here decreases down to a level between 10mM and 15mM potassium nitate concentration. There is also only a small difference between 5mM and 10mM potassium nitrate, which differs to the pattern seen with the bacterial-mammalian promoter ligated to eCFP. As previously stated, this may be due to the cell overexpressing eCFP up to the point at which the excess protein begins to form inclusion bodies which can no longer fluoresce; alternatively, this could be due the potassium nitrate concentration reaching the critical concentration at which it becomes toxic to the cell. This data differs to the readings taken from the bacterial-mammalian ligated to eCFP, as well as the hybrid promoters to RFP, which may suggest there is a difference in the molecular mechanisms that these promoters function by; however at this point the change in intensity at 20mM is inconclusive and is an area which we would like to look into further.

Figure x. A graph of the intensity of RFP fluorescence at different wavelengths ranging from 600 - 650 nm where the samples were excited at 560 nm. The samples of E. coli were transformed by the M-B + RFP biobrick and grown overnight in different concentrations of potassium nitrate (0 mM, 5 mM, 10 mM, 15 mM and 20 mM) before being lysed in order to release proteins from the cells for fluorometer analysis.

The graph above shows the flourescence measured from the expression of RFP due to the response of the mammalian-bacterial promoter to different concentrations of potassium nitrate. The wavelength reading which corresponds to RFP is between 600-650nm. The graph clearly demonstrates that between 0mN and 15mM there is a proportional relationship between fluorescence intensity and potassium nitrate concentration. It has been found that for all biobricks apart from the mammalian-bacterial promoter ligated to eCFP at a 20mM concentration the intensity of fluorescence sharply decreases.

Figure x. A graph comparing the intensity of RFP fluorescence at different wavelengths ranging at 610 nm where the samples were excited at 560 nm. The samples of E. coli were transformed by the B-M + RFP biobrick and grown overnight in different concentrations of potassium nitrate (0 mM, 5 mM, 10 mM, 15 mM and 20 mM) before being lysed in order to release proteins from the cells for fluorometer analysis.

As previously stated, we were initially unsure of the effect that the orientation of the bacterial (pYEAR) and the mammalian (CaRG) genes would have in gene expression, therefore we synthesised two hybrid promoters in the orientation bacterial-mammalian and mammalian-bacterial. The graph above compares the intensity of fluorescence of the two hybrid promoters (BBa_K774007 and BBa_K774005) ligated to RFP. There appears to be no pattern if the difference between the intensities of these two promoters; however both promoters do show a decrease in intensity at 20mM potassium nitrate and decrease from a maximum intensity of 82a.u. (bacterial-mammalian) and 66a.u. to approximately 36a.u.

Flow Cytometry

Three tubes of media were inoculated with E. coli transformed by the [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774005 B-M + RFP] or [http://partsregistry.org/wiki/index.php?title=Part:BBa_K774006 M-B + eCFP] biobrick. Each tube then had potassium nitrate added to it at different concentrations; 0 mM, 1 mM and 10 mM respectively. The E. coli were grown over night and then spun down, fixed in 4% PFA and re-suspened in 500ul PBS. The samples were then analysed in an Acuri C6 or BD Aria II flow cytometer.

Full Protocol

Note: This was the first time the flow cytometers at the University of East Anglia had been used with E. coli

B-M + RFP Flow Cytometry Data

Figure 7. Flow cytometry data for B-M RFP transformed E. coli that were grown in either 0 mM, 1 mM or 10 mM potassium nitrate. Top row: Scatter plot of raw data and gating strategy utilised. Middle row: RFP Fluorescence profiles of samples. Lower left: Fluroescence profiles of the three samples overlai on the same plot.

Figure 8. Flow cytometry fluorescence data: B-M RFP transformed E. coli that were grown in either 0 mM, 1 mM or 10 mM potassium nitrate.

M-B + eCFP Flow Cytometry Data

Figure 9. Flow cytometry data for M-B eCFP transformed E. coli that were grown in either 0 mM, 1 mM or 10 mM potassium nitrate. Top row: Scatter plot of raw data and gating strategy utilised. Middle row: RFP Fluorescence profiles of samples.

Figure 10. Flow cytometry fluorescence data: M-B eCFP transformed E. coli that were grown in either 0 mM, 1 mM or 10 mM potassium nitrate.

Transfection of M-B + eCFP into the MCF7 human breast cancer cell line

In order to ascertain the flexibility of the hybrid promoter and help prove our original aim of producing a promoter that could be used in both eukaryotes and prokaryotes correct, the DNA for M-B + eCFP was transfected into the MCF7 human breast cancer cell line. An experiment was set up using S-Nitroso-N-acetyl-DL-penicillamine (SNAP), a nitric oxide donor, in order to induce expression of the fluorescent protein. A six-well transfection slide was produced containing:

The cells were then left for a day before they were imaged with a fluorescence microscope in order to observe expression of eCFP.

Figure 11. Transfection of MCF7 cells with images taken via a Zeiss CCD2 inverted microscope to detect CFP expression. Images in the left two columns are controls and have not been transfected, images in the right two columns have been transfected with M-B + CFP DNA; SNAP is a nitric oxide donor, therefore addition of SNAP was used to try and induce promoter activity.

The figure appears to show fluorescence in the mammalian cells that had been transfected with M-B + CFP compared with the cells that had not been transfected. The figure also appears to show stronger fluorescence in the cells that had been transfected with M-B + CFP and had been grown with the nitric oxide donor SNAP compared to the cells that had been transfected with M-B + CFP and grown without SNAP.

Figure 12. Transfection of MCF7 cells with images taken via a Zeiss CCD2 inverted microscope to detect CFP expression. Image shows mammalian cells transfected with M-B + CFP DNA however no SNAP (a nitric oxide donor) has been administered.

Close up image of what appears to be eCFP fluorescence from a transfected MCF7 cell.

The figure appears to show low levels of fluorescence in the cells as there are small blue circles appearing in the cells indicative of CFP expression. MCF7 cells do endogenously express endothelial cell nitric-oxide synthase (ecNOS), which can produce low levels of NO. Perhaps it is endogenous NO production which is inducing the M-B promoter to express low levels of eCFP.

Figure 13 Transfection of MCF7 cells with images taken via a Zeiss CCD2 inverted microscope to detect CFP expression. Image shows mammalian cells transfected with M-B + CFP DNA where SNAP (a nitric oxide donor) has been administered.

The figure suggests that expression of CFP has occurred due to the large blue shape appearing in the centre of the image following the use of a filter to view fluorescent cyan more easily.

Future experiments are needed to confirm these results and also to provide more information.

Discussion

BM/MB better or the same, RFP/CFP better or the same etc.

Future Experiments

. Full quantitative analysis to see where the values lie; combine with tuners for different sensitivity levels

. With different substrates (e.g. nitrite salt, NO donor)

. With different reporter/effector enzyme

. Repeat MB-eCFP transfection into MCF7 cells. Utilise more experimental controls (e.g. M-B only transfection).

. Construct an MB-eCFP plasmid which is optimised for mammalian systems.

. Optimise use of SNAP NO donor and use alternatives to enhance the induction of Nitric Oxide production.

. Generate a new biobrick: M-B + Nitric Oxide Synthase + eCFP to test the concept of generating a synthetic gene network which can act as a cancer theraeutic.

References

Civerolo, K.L. and Dickerson, R.R. (1998) Nitric oxide soil emissions from tilled and untilled cornfields, Agricultural and Forest Meteorology, 90; 307-311

Davidson, E., (2012), Sources of Nitric Oxide and Nitrous Oxide following Wetting of Dry Soil, Soil Sci. Soc. Am. J. 56; 95–102

Lin H.Y., Bledsoe P.J., Stewart V., (2007), Activation of yeaR-yoaG Operon Transcription by the Nitrate-Responsive Regulator NarL Is Independent of Oxygen- Responsive Regulator Fnr in Escherichia coli K-12▿, Journal of Bacteriology, 189: 7539 - 7548

Lipschultz, F., Zafiriou, O.C. Wofsy, S.C., Elroy, M.B., Valois, F.W. and Watson, S.W. (1981) Production of NO and N2O by soil nitrifying bacteria, Macmillan Journals, 294; 641-643

Pasqualini, R., Koivunen, E., Kain, R., Lahdenranta, J., Sakamoto, M., Stryhn, A., Ashmun, R.A., Shapiro, L.H., Arap, W. And Ruoslahti, E. (2000) Aminopeptidase N is a receptor for tumour-homing peptides and a target for inhibiting angiogenesis, The Journal of Cancer Research, 60; 722-727

Scott S.D., Joiner M.C., Marples B., (2002), Optimizing radiation-responsive gene promoters for radiogenetic cancer therapy., Gene Therapy, 9: 1396-1402

Worthington J., Robson T., Scott S., Hirst, D., (2005), Evaluation of a synthetic CArG promoter for nitric oxide synthase gene therapy of cancer, Gene Therapy, 12: 1417–1423

Xu, W., Liu, L.Z., Loizidou, M., Ahmed, M. And Charles, I.G. (2002) The role of nitric oxide in cancer, Cell Research, 12; 311-320