"

From 2012.igem.org

Revision as of 04:57, 7 August 2012 (view source) Silas (Talk | contribs) ← Older edit		Revision as of 05:21, 7 August 2012 (view source) Silas (Talk | contribs) (→Media Preparation) Newer edit →
Line 2:		Line 2:
-	''LB Agar Media''	+	*'''LB media Method:'''
		+	**'''Ingredients:'''-Tryptone 10g, Yeast extract 5g, NaCl 10g, MilliQ water to 1000ml.
		+	**'''Methods:'''-Dissolve 10g tryptone, 5g yeast extract and 10g NaCl in 800 mL MilliQ water, making use of a magnetic stirrer. Once dissolved, bring volume up to 1 liter using the MilliQ water. Autoclave 500 mL of the solution (121°C, 15 min, standard liquid cycle).
-	*Yeast extract 5g	+
-	*Tryptone 10g	+	*'''LB agar Method:''' Add 7.5 g Bacto agar to the remaining 500 mL of LB media and autoclave [121°C, 15 min, standard liquid cycle]. Add 250 µL of Chloroamphenicol and mix well before plating out and setting agar. After cooling and antibiotic addition, the LB agar was plated out using aseptic technique. 14 LB agar plates were prepared and allowed to cool next to the Bunsen. After this all plates were aseptically sealed using parafilm and stored in the refrigerator.
-	*Agar 15g	+
-	*MilliQ water to 1000mL	+
		+	*'''SOC media (for competent cells):''' A mixture of 4g 2% w/v bacto-tryptone (20 g), 1g 0.5% w/v bacto-yeast extract, 400µl 5M NaCl, 250 µl 2M KCl, 20mM MgSO4 (0.4821 g), 0.7222g 20mM glucose and MilliQ H2O to 200 mL. The adjusted quantities were combined in 1l measuring column with constant stirring and then placed in the autoclave for sterilization.
		+
		+
		+	*'''SOB Media (for competent cells):''' Distilled H2O of volume 900ml was added with 5g Bacto Tryptone, 1.25g Bacto Yeast Extract, 0.124 grams NaCl and 0.0475 grams KCl. This was then adjust to pH 7.0 with NaOH or HCl and then to 250mL with distilled H2O. The system was then sterilized by autoclaving.

---

Revision as of 05:21, 7 August 2012

Media Preparation

• LB media Method:
  • Ingredients:-Tryptone 10g, Yeast extract 5g, NaCl 10g, MilliQ water to 1000ml.
  • Methods:-Dissolve 10g tryptone, 5g yeast extract and 10g NaCl in 800 mL MilliQ water, making use of a magnetic stirrer. Once dissolved, bring volume up to 1 liter using the MilliQ water. Autoclave 500 mL of the solution (121°C, 15 min, standard liquid cycle).

• LB agar Method: Add 7.5 g Bacto agar to the remaining 500 mL of LB media and autoclave [121°C, 15 min, standard liquid cycle]. Add 250 µL of Chloroamphenicol and mix well before plating out and setting agar. After cooling and antibiotic addition, the LB agar was plated out using aseptic technique. 14 LB agar plates were prepared and allowed to cool next to the Bunsen. After this all plates were aseptically sealed using parafilm and stored in the refrigerator.

• SOC media (for competent cells): A mixture of 4g 2% w/v bacto-tryptone (20 g), 1g 0.5% w/v bacto-yeast extract, 400µl 5M NaCl, 250 µl 2M KCl, 20mM MgSO4 (0.4821 g), 0.7222g 20mM glucose and MilliQ H2O to 200 mL. The adjusted quantities were combined in 1l measuring column with constant stirring and then placed in the autoclave for sterilization.

• SOB Media (for competent cells): Distilled H2O of volume 900ml was added with 5g Bacto Tryptone, 1.25g Bacto Yeast Extract, 0.124 grams NaCl and 0.0475 grams KCl. This was then adjust to pH 7.0 with NaOH or HCl and then to 250mL with distilled H2O. The system was then sterilized by autoclaving.