Team:Peking/Project/Luminesensor/Design

From 2012.igem.org

(Difference between revisions)

Latest revision as of 20:13, 26 October 2012

Home
Team
Project
Data Page
Modeling
Human Practice
Safety

- Data Page
- Judging Criteria

Design: A Retrospect

To date, virtually all of current light-sensitive optogenetic modules have been designed following two similar general principles –- attaching a physiologically functional domain to a photoreceptor domain, or rewiring physiological pathways to the downstream of the signaling pathways of photoreceptor proteins in order to use light to trigger physiological response. These two principles, whose concepts easy to understand, actually bear in their kernel the spirit of modular design which has been so strongly proposed in synthetic biology, with the former principle particularly versatile and easy to manipulate.

Figure 1. Illustration of the first general principle of optogenetic design. Designs of fusion proteins in optogenetic research have followed a general principle of attaching a physiological functional domain to a photosensor domain. When light excites the photosensor domain to trigger, say, confromational change, the change will be transmitted to the physiological domain to induce physiological effect.

Figure 2. Illustration of the second general principle of optogenetic design. There is another principle for optogenetic design, namely to rewire a physiological signaling pathway to the downstream of the signaling pathway of a photosensor. Thus the physiological effect of the physiological pathway may occur as a ramification of the photosensor signaling cascade.

Thus, we reasoned that the first principle is an appropriate paradigm to follow. However, in order to make the novel sensor an unprecedented success, the functional domain, photoreceptor domain, and the connection between them must be carefully chosen and sophistically designed to solve several important problems that have become gradually manifest along with the development of optogenetic research, for they may impede the future application of our optogentic tool.

First of all, in order to be widely applicable for biotechnological use, a photosensitive module must be truly ‘sensitive’. Some of the existing photosensitive modules work best around light intensity of 10W/m², which is about the illuminance inside a room on a sunny day; some even require laser beams to activate, whose light intensity can hardly be achieved in natural environment. Apparently, the dependency on high light intensity is severely defective, because high-intensity light can be detrimental to cellular function or can even cause cell death. Moreover, this defect limits the application of optogenetics in future possible scenarios where photosensitive modules may be required to respond to soft light that is cell-and tissue-friendly, or light emitted by biological organisms, or, even more stringent, light emitted by bacteria, which is by no means brighter than the dim light of the moon. This is particularly the case when we consider cell-cell communication through light, because the cells receiving the light signal must be able to sense light emitted by another kind of cell.

Secondly, the photosensitive modules must be widely compatible. Most of current photosensitive modules have utilized light-sensitive domains of photoreceptors of eukaryotic origin, which often fail to work in prokaryotic organisms. Yet comparing to eukaryotic organisms, prokaryotic cells require significantly less stringent culturing conditions and are considerably less susceptible to environmental pollutions. What’s more, some of current photosensitive modules utilize photoreceptor domains such as phytochromes where exogenously supplied specific chormophores are necessary for its normal function. These two obvious defects substantially block the way to applying optogenetics to synthetic biology where in-field application is very much considered.

Thirdly, the design of a successful photosensitive module should be instructive to future photosensitive module engineering, which is particularly important for synthetic biology. In other words, its design should be modular enough to make possible the reshuffling of functional domain to construct modules with novel physiological functions. With not much deduction, one can easily postulate that this would require equal amount of modularity in the original photosensor domain and physiologically functional domain based on which the design was constructed.

Figure 3. Illustration of the importance of modularity. Modularity is important in both evolution and synthetic biology. As shown in the figure, even if only equipped with limited amount of modular parts, we can interchange the relationship between them to create many more new physiological function. Thus designs possessing modular components would be much more enabling than a non-modular one.

Now, with the little retrospect above, we have chosen the designing principle and determined the ‘differences’ we would like to achieve: sensitivity, compatibility, and modularity. Now comes the time to rationally build up the sensor.

Design: Building Up the Light Sensor

Under the invaluable instruction of Prof. Yi Yang, our team members from ECUST constructed a brand new prokaryotic light sensor following the first principle we have described above. (Attaching a physiologically functional domain to a photosensor domain.)

The photosensor domain of the fusion protein sensor is a VVD protein. VVD is the smallest member of the phototropin photosensor family. Phototropin is one of the three most commonly used groups of photosensors (rhodopsins, phytochromes, and phototropins), and possesses the most distinct modular structure among them. Phototropins have a structurally conserved light sensor domain, termed LOV (light, oxygen and voltage) domain, which is easily discernable and often precedes, within a single reading frame, a sequence of an enzymatically functional domain, connected by the sequence of a linker domain. Despite its structural modularity, the LOV light sensitive domain also seems to possess an outstanding functional modularity, for it was found to combine with various functional domains, including naturally occurring ones and artificially synthesized ones, to perform various cellular functions.

LOV photosensor domain bears much more virtue than just its modularity. LOV domains have a non-covalently bound flavin (FMN or FAD) chromophore that is absolutely essential for its function. Unlike those choromophres of rhodopsins and phytochormes, flavin is an essential chemical compound deeply involved in the respiratory chain in all forms of life, including bacteria. In another word, in order to let this LOV domain function in bacteria, we only need to incorporate the gene into the cell, and the cell will automatically supply the protein with the chromophore. This ensures the compatibility of the sensor to a variety of biological organisms.

The VVD phototropin protein our team utilize is a well characterized phototropin originated from Neurospora. crassa that has been previously demonstrated to be very sensitive. VVD protein contains an N-terminal cap and a LOV photosensitive domain. When exited by blue light with wavelength of 440-480nm, a covalent bound will form between the C₄ of the non-covalently bound flavin molecule and the cystine 108 residue of the LOV photosensitive domain. The formation of this covalent bound will trigger a series of conformational change in the LOV domain and cause the N-terminal cap to undock from the LOV domain. The undocked N-terminal cap will serve as an interface between VVD molecules and induce them to form rapidly exchanging dimers.

Figure 4. Illustration of function mechanism of phototropin VVD. VVD belongs to phototropin photosensor family. VVD posseses a clearly distinguishable photo-sensitive LOV domain and utilizes a FAD (flavin adenine dinucleotide) molecule as its chromophore. When excited by blue light, the N-terminal cap of VVD protein will disassociate from the LOV domain and serves as a dimerization surface for subsequent homo-dimerization. When the dimerized VVD proteins are no longer exposed to blue light, they will gradually decay back to its dark state.

The physiologically functional domain of the novel sensor is the DNA binding domain of the LexA protein, a bacteria transcription repressor. In order to work well with our VVD photosensor domain, the DNA binding domain of the transcriptional factor must be easily discernable in the whole structure, and it had better been proven to function independent of the rest part of the protein. Of course, the DNA binding activity of the transcriptional factor we choose must be specific and rigorously require dimerization. LexA is just the transcription repressor that satisfy all these criteria.

Figure 5.Illustration of function mechanism of LexA transcription repressor. LexA is the general repressor of the genes in bacteria SOS system. It is composed of a C-terminal domain (CTD), which is responsible for dimerization, and a N-terminal domain (NTD), which is responsible for DNA binding. SOS system genes possess a (some possess several) symmetrical sequence (CTGT(N)₈ACAG) in their promoters, which is called the SOS box. LexA proteins will form a dimer in bacteria cell and the NTDs will recognize and bind to the SOS box in SOS promoters and thus inhibit transcription initiation.

LexA is a transcription repressor of all the genes in the SOS system in E.coli, and its crystal structure has been resolved at high-resolution. LexA protein consists of a N-terminal DNA binding domain and a C-terminal dimerization domain with a short hydrophilic linker linking the two separate domains, making the structure impressively modular. Beside the apparent structural modularity, various researches have utilized LexA to create versatile gene expression regulating modules that have convincingly demonstrated its functional modularity, further adding to its promise. (For example, a LexA-based genetic system has been devised for monitoring and analyzing protein heterodimerization in Escherichia coli.) Under normal physiological conditions, two LexA proteins will form a homodimer through the dimerization domain interface and bind to the SOS box target gene sequence in promoters of genes in SOS system and create significant steric hindrance for transcription polymerase binding and thus inhibit transcription initiation. When E.coli cell encounters some extracellular factors that would cause intracellular damage, for example, DNA breakage that would result in ssDNA formation, the RecA protein, which also belongs to the SOS family, will bind to the ssDNA to form a filament and interact with LexA and cause its auto-cleavage. The cleavage will cause the DNA binding domain to dissociate from the dimerization domain. Without the help of dimerization domain, the DNA binding domain will no longer stay in its dimerized form. LexA DNA binding domain has been shown to have a thousand-fold lower binding affinity to its target sequence in its monomer form compared to its dimerized form. Thus the cleaved LexA can no longer bind efficiently to its target sequence to block the way for transcription initiation, and the target gene will be expressed.

Figure 6. Procedure of building up the light sensor. We take the N-terminal domain of LexA protein, which is responsible for DNA binding, and fused it to the N-terminal of VVD photosensor protein. Thus the light sensor is constructed.

Figure 7. Illustration of the function mechanism of the light sensor. When exposed to blue light, the N-terminal cap of VVD domain will undock and cause VVD domain to dimerize. The dimerization of VVD protein will help the dimerization of N-terminal domains of LexA protien fused to the N-terminal of VVD domain. When helped to dimerize, the NTD of LexA protein will recognize and bind to the SOS box in the promoter of our reporter gene and inhibit transcription initiation.

Using DNA binding domain of LexA repressor protein as the physiologically functional domain and a flexible linker linking the two distinct domains, we now have the panorama of our design of photosensitive fusion protein. In the dark, the light sensor would be in monomer form and unable to bind target DNA sequence. When exited by blue light, the VVD domain of the sensor will undergo conformational change and expose its N-terminal cap and induce the light-sensor to dimerize and bind to the target DNA sequence and inhibit transcription initiation. Thus the light sensor will function as a light inducible transcription repressor, generating a light-off system.

Design: Ensuring Orthogonality

Perhaps a careful reader has already noticed a severe defect in our design. That is, by choosing the DNA binding domain of a bacteria endogenous transcription repressor, we must use reporter genes that will also be repressed by endogenous LexA protein. If we do not introduce changes into the DNA binding domain of the light sensor, the only way to rule out the interference of endogenous LexA would be knocking out the genomic sequence of LexA protein. This will indubitably diminish its applicability in the future, since it will not work in any strain with endogenous LexA remaining. (For details see Modeling Luminesensor Orthogonality)

Figure 8. A molecular structure of N-terminal domain of LexA protein. The arrow points to the position of residue 40, 41 and 42. In LexA408 protein, three point mutations P40A, N41S and A42S are introduced into the N-terminal domain. These three mutations near the DNA binding surface of the protein will change its binding specificity. LexA408 will recognize a symmetrically altered sequence different from the one recognized by wild type LexA.

Figure 9. Our solution to the problem of orthogonality. We found that a LexA variant LexA408 will only recognize a symmetrically altered SOS box (CCGT(N)₈ACGG), different form the original one (CTGT(N)₈ACAG). So we changed the LexA NTD domain of the wild type light sensor to its 408 form, and changed the SOS box in our reporter gene promoters correspondingly. Now the endogenous LexA protein will no longer bind to the promoters of our reporter gene, while the light sensor still possessing the light-inducible repression function. Thus we ensured the light-off system's orthogonality to the bacteria SOS system.

So we set out to find a solution to this important problem. The most natural way would be creating a mutated form of LexA so that it will only recognize a target sequence different from the sequence the wild-type LexA would recognize. We were happy to discover that such a thing actually exists. It is called the LexA408 variant, and it carries mutations PA40, NS41 and AS42, and has been shown to have much higher affinity for a symmetrically altered target sequence CCGT (N)₈ ACGG, different from the wild type SOS box CTGT (N)₈ ACAG, which is specifically recognized by the wild-type LexA. Thus, by introducing the 408 mutations into the DNA binding domain of the light sensor, we can insulate the light-off system from the interference from the genetic context of the host strain. This outstanding characteristic ensures the orthogonality of our system to the endogenous SOS system will greatly enhance the compatibility of our module to those synthetic modules that have hitherto been designed and thus adds to the promise of future application.

Reference

1. Shimizu-Sato, S., Huq, E., Tepperman, J.M., & Quail, P.H.(2002). A light-switchable gene promoter system. Nat. Biotechnol. 20: 1041: 1044
2. Wu, Y., Frey, D., Lungu, O.I., Jaehrig, A., Schlichting, I., Kuhlman, B. & Hahn, K.M.(2009). A genetically encoded photoactivatable Rac controls the motility of living cells. Nature, 461: 104: 8
3. Levskaya, A., Weiner, O.D., Lim, W.A. & Voigt, C.A.(2009). Spatiotemporal control of cell signalling using a light-switchable protein interaction. Nature, 461: 997: 1001
4.Möglich, A., Ayers, R.A. & Moffat, K.(2009). Design and Signaling Mechanism of Light-Regulated Histidine Kinases. J. Mol. Biol., 385: 1433: 1444
5. Strickland, D., Moffat, K. & Sosnick, T.R.(2008). Light-activated DNA binding in a designed allosteric protein. Proc. Natl Acad. Sci. USA, 105: 10709: 10714
6. Ohlendorf, R., Vidavski, R.R., Eldar, A., Moffat, K. & Möglich, A.(2012). From Dusk till Dawn: One-Plasmid Systems for Light-Regulated Gene Expression. J. Mol. Biol., 416: 534: 542
7. Toettcher, J.E., Voigt, C.A., Weiner, O.D. & Lim, W.A.(2010). The promise of optogenetics in cell biology: interrogating molecular circuits in space and time. Nat. Methods, 8: 35: 38
8. Bacchus, W. & Fussenegger, M.(2011) The use of light for engineered control and reprogramming of cellular functions. Curr. Opin. Biotechnol., 23: 1: 8
9. Cole, S.T.(1983) Charaeterisation of the Promoter for the LexA Regulated sulA Gene of Escherichia coli. Mol. Gen. Genet., 189: 400: 404
10. Crane, B.R. et al.(2007) Conformational Switching in the Fungal Light Sensor Vivid. Science, 316: 1054: 1057
11. Herrou, J. and Crosson, S.(2011) Function, structure and mechanism of bacterial photosensory LOV proteins. Nat. Rev. Microbiol., 9: 713: 723
12. Zoltowski, B.D., and Crane, B.R.(2008) Light activation of the LOV protein Vivid generates a rapidly exchanging dimer. Biochemistry, 47: 7012: 7019
13. Zoltowski, B.D., Vaccaro, B. & Crane, B.R. Mechanism-based tuning of a LOV domain photoreceptor. Nat. Chem. Biol., 5: 827: 834
14. Vaidya, A.T., Chen, C.H., Dunlap, J.C., Loros, J.J., and Crane, B.R.(2011) Structure of a light-activated LOV protein dimer that regulates transcription in Neurospora crassa. Sci. Signal., 4: ra50
15. Wang, X., Chen, X. & Yang, Y.(2012) spatiotemporal control of gene expression by a light-switchable transgene system. Nat. Methods, 9: 266: 269
16. Zhang, A.P.P., Pigli, Y.Z & Rice, P.A.(2010) Structure of the LexA–DNA complex and implications for SOS box measurement.Nature, 466: 883: 886
17. Butalaa, M., Zgur-Bertokb, D., and Busby, S. J. W.(2009) The bacterial LexA transcriptional repressor. Cell. Mol. Life Sci., 66: 82: 93
18. Tabor, J.J., Salis,H.M., Simpson, Z.B., Chevalier,A.A., Levskaya, A., Marcotte, E.A., Voigt, C.A., and Ellington, A.D.(2009) A Synthetic Genetic Edge Detection Program. Cell, 137: 1272: 1281
19. Voigt., C.A., et al.(2005) Engineering Escherichia coli to see light. Nature, 438: 441: 442
20. Ye, H., Baba, M.D.E., Peng, R., Fussenegger, M.(2011) A Synthetic Optogenetic Transcription Device Enhances Blood-Glucose Homeostasis in Mice. Science, 332: 1565: 1568

@@ Line 10: / Line 10: @@
 <div class="PKU_context floatR first">
-<h3 id="title1" >Summary</h3>
-<p>This summer, our team wished to create a novel optogenetic tool that could really make a big difference in the field of synthetic biology. But what should the difference be? In order to answer this question, we should perform a brief retrospect to meditate upon what accomplishment has already been achieved and what problems remained to be solved in optogenetic research.</p>
-</div>
-<div class="PKU_context floatR">
 <h3 id="title2" >Design: A Retrospect</h3>
 <p>
-<br/>As we discussed before, virtually all of current light-sensitive optogenetic modules have been designed following two similar general principles –- attaching a physiologically functional domain to a photoreceptor domain or rewiring physiological pathways to the downstream of the signaling pathways of photoreceptor proteins in order to use light to trigger physiological response. These two principles, whose concepts easy to understand, actually bear in their kernel the spirit of modular design which has been so strongly proposed in synthetic biology, with the former principle particularly versatile and easy to manipulate.</p>
+<br/>To date, virtually all of current light-sensitive optogenetic modules have been designed following two similar general principles –- attaching a physiologically functional domain to a photoreceptor domain, or rewiring physiological pathways to the downstream of the signaling pathways of photoreceptor proteins in order to use light to trigger physiological response. These two principles, whose concepts easy to understand, actually bear in their kernel the spirit of modular design which has been so strongly proposed in synthetic biology, with the former principle particularly versatile and easy to manipulate.</p>
   <div class="floatC">
    <img src="/wiki/images/5/55/Peking2012_Design_illustration_of_general_principle_1.png" alt="Figure 1" style="width:500px;"/>
@@ Line 23: / Line 23: @@
    <p class="description">Figure 2. Illustration of the second general principle of optogenetic design. There is another principle for optogenetic design, namely to rewire a physiological signaling pathway to the downstream of the signaling pathway of a photosensor. Thus the physiological effect of the physiological pathway may occur as a ramification of the photosensor signaling cascade.</p>
   </div>
-  <p>Thus we reasoned that the first principle is an appropriate paradigm to follow. However, in order to make our novel optogenetic tool an unprecedented success, the functional domain, photoreceptor domain and the connection between them must be carefully chosen and sophistically designed to solve several important problems that have become gradually manifest along with the development of optogenetic research, for they may impede the future application of our optogentic tool. <br/><br/>First of all, in order to be widely applicable for biotechnological use, a photosensitive module must be truly ‘sensitive’. Some of the existing photosensitive modules work best around light intensity of 10W/m<sup>2</sup>, which is about the illuminance inside a room on a sunny day; some even require laser beam to activate, whose light intensity can hardly be achieved in natural environment. Apparently, the dependency on high light intensity is severely defective, because high-intensity light could be detrimental to cellular function or can even cause cell death. Moreover, this defect limits the application of optogenetics in future possible scenarios where photosensitive modules may be required to respond to soft light that is cell-and tissue-friendly, or light emitted by biological organisms, or, even more stringent, light emitted by bacteria, which is by no means brighter than the dim light of the moon. <br/><br/>
+  <p>Thus, we reasoned that the first principle is an appropriate paradigm to follow. However, in order to make the novel sensor an unprecedented success, the functional domain, photoreceptor domain, and the connection between them must be carefully chosen and sophistically designed to solve several important problems that have become gradually manifest along with the development of optogenetic research, for they may impede the future application of our optogentic tool. <br/><br/>First of all, in order to be widely applicable for biotechnological use, a photosensitive module must be truly ‘sensitive’. Some of the existing photosensitive modules work best around light intensity of 10W/m<sup>2</sup>, which is about the illuminance inside a room on a sunny day; some even require laser beams to activate, whose light intensity can hardly be achieved in natural environment. Apparently, the dependency on high light intensity is severely defective, because high-intensity light can be detrimental to cellular function or can even cause cell death. Moreover, this defect limits the application of optogenetics in future possible scenarios where photosensitive modules may be required to respond to soft light that is cell-and tissue-friendly, or light emitted by biological organisms, or, even more stringent, light emitted by bacteria, which is by no means brighter than the dim light of the moon. This is particularly the case when we consider cell-cell communication through light, because the cells receiving the light signal must be able to sense light emitted by another kind of cell. <br/><br/>
 Secondly, the photosensitive modules must be widely compatible. Most of current photosensitive modules have utilized light-sensitive domains of photoreceptors of eukaryotic origin, which often fail to work in prokaryotic organisms. Yet comparing to eukaryotic organisms, prokaryotic cells require significantly less stringent culturing conditions and are considerably less susceptible to environmental pollutions. What’s more, some of current photosensitive modules utilize photoreceptor domains such as phytochromes where exogenously supplied specific chormophores are necessary for its normal function. These two obvious defects substantially block the way to applying optogenetics to synthetic biology where in-field application is very much considered. <br/><br/>
-Thirdly, the design of a successful photosensitive module should be instructive to future photosensitive module engineering, which is particularly important for synthetic biology. In another word, its design should be modular enough to make possible the reshuffling of functional domain to construct modules with novel physiological functions. With no much deduction, one can easily postulate that this would require equal amount of modularity in the original photosensor domain and physiologically functional domain based on which the design was constructed. <br/><br/>
+Thirdly, the design of a successful photosensitive module should be instructive to future photosensitive module engineering, which is particularly important for synthetic biology. In other words, its design should be modular enough to make possible the reshuffling of functional domain to construct modules with novel physiological functions. With not much deduction, one can easily postulate that this would require equal amount of modularity in the original photosensor domain and physiologically functional domain based on which the design was constructed. <br/><br/>
   </p>
   <div class="floatC">
   <img src="/wiki/images/6/6f/Peking2012_illustration_of_the_importance_of_modularity.png" alt="Figure 3." style="width:600px;"/>
-  <p class="description">Figure 3. Illustration of the importance of modularity. Modularity is important in both evolution and synthetic biology. As is shown in the figure, even if only equipped with limited amount of modular parts, we can interchange the relationship between them to create many more new physiological function. Thus designs possessing modular components would be much more enabling than a non-modular one.</p>
+  <p class="description">Figure 3. Illustration of the importance of modularity. Modularity is important in both evolution and synthetic biology. As shown in the figure, even if only equipped with limited amount of modular parts, we can interchange the relationship between them to create many more new physiological function. Thus designs possessing modular components would be much more enabling than a non-modular one.</p>
   </div>
   <p>
-Now, with the little retrospect above, we have determined the ‘differences’ we would like to make: sensitivity, compatibility and modularity. But how to create a photosensitive optogenetic tool that is ultra-sensitive, widely compatible and highly modular all at the same time? To address this problem, we need to start from choosing a promising light-sensitive photoreceptor domain—the core of our design.
+Now, with the little retrospect above, we have chosen the designing principle and determined the ‘differences’ we would like to achieve: sensitivity, compatibility, and modularity. Now comes the time to rationally build up the sensor.
   </p>
 </div>
 <div class="PKU_context floatR">
-<h3 id="title3" >Design: Choosing the Photoreceptor<br/>Domain</h3>
+<h3 id="title3" >Design: Building Up the Light Sensor</h3>
 <p>
-From the discussion above, we have already formed a few criteria that the photoreceptor domain must satisfy. It should have been proved to be highly sensitive, should incorporate no chromophore that cannot be synthesized by bacteria, and should be modular in structure and function. Based on these standards we can go through the photoreceptor proteins previously used in optogenetic research, examine them one by one, and rule out inappropriate ones one by one to finally reach the most proper light-sensitive photoreceptor domain for our design.<br/><br/>
+Under the invaluable instruction of Prof. Yi Yang, our team members from ECUST constructed a brand new prokaryotic light sensor following the first principle we have described above. (Attaching a physiologically functional domain to a photosensor domain.) <br/><br/>
-The light-sensitive domains of most of existing optogenetic modules can be categorized into three major groups: rhodopsins, phytochromes, and phototropins, each with distinct characters and utilities. <br/><br/>
+The photosensor domain of the fusion protein sensor is a VVD protein. VVD is the smallest member of the phototropin photosensor family. Phototropin is one of the three most commonly used groups of photosensors (rhodopsins, phytochromes, and phototropins), and possesses the most distinct modular structure among them.  Phototropins have a structurally conserved light sensor domain, termed LOV (light, oxygen and voltage) domain, which is easily discernable and often precedes, within a single reading frame, a sequence of an enzymatically functional domain, connected by the sequence of a linker domain. Despite its structural modularity, the LOV light sensitive domain also seems to possess an outstanding functional modularity, for it was found to combine with various functional domains, including naturally occurring ones and artificially synthesized ones, to perform various cellular functions.
+<br/><br/>
+LOV photosensor domain bears much more virtue than just its modularity. LOV domains have a non-covalently bound flavin (FMN or FAD) chromophore that is absolutely essential for its function. Unlike those choromophres of rhodopsins and phytochormes, flavin is an essential chemical compound deeply involved in the respiratory chain in all forms of life, including bacteria. In another word, in order to let this LOV domain function in bacteria, we only need to incorporate the gene into the cell, and the cell will automatically supply the protein with the chromophore. This ensures the compatibility of the sensor to a variety of biological organisms.<br/><br/>
+The VVD phototropin protein our team utilize is a well characterized phototropin originated from <i>Neurospora. crassa</i> that has been previously demonstrated to be very sensitive. VVD protein contains an N-terminal cap and a LOV photosensitive domain. When exited by blue light with wavelength of 440-480nm, a covalent bound will form between the C<sub>4</sub> of the non-covalently bound flavin molecule and the cystine 108 residue of the LOV photosensitive domain. The formation of this covalent bound will trigger a series of conformational change in the LOV domain and cause the N-terminal cap to undock from the LOV domain. The undocked N-terminal cap will serve as an interface between VVD molecules and induce them to form rapidly exchanging dimers.<br/><br/>
-Rhodopsins are membrane anchored proteins that can be devided into two subtypes. Both of them detect light through a retinal chromophore. Type 1 rhodopsins, with bacteria rhodopsin as a prototypical representative, directly drive ionic currents through a cycle of light-induced conformational change. Type 2 rhodopsins, with bovine rod rhodopsin as a representative, regulate ionic currents through a downstream signaling pathway triggered by light-induced conformational change in the molecule. The type 1 rhodopsins proved very useful in neuron science. For example, by expressing Channelrhodopsin-2 (ChR2), a light-sensitive ion-channel from green algae which will become permeable to cations after being triggered by blue light, under the control of a tissue specific promoter, scientists have achieved precise and timed light-dependent activation of specific neuronal cells. Type 2 rhodopsons can also achieve light-dependent spatial-temporal control of gene expression through synthetic rewiring of calmodulin signaling pathway which will activate nuclear transcription to the downstream of signaling pathway of rhodopsins such as melanopsin, which will, upon light activation, trigger calcium influx. However, rhodopsins may not be suitable for our project, partly due to the extraordinary integrity of its structure and its membrane-anchored nature, which makes it difficult to fit into the framework of the first principle we have mentioned before, and partly due to the requirement of exogenous supply of the chromophore—retinal, which is not involved in common bacteria metabolism pathways. These two unique features clearly contradict with our goal—‘modularity’ and ‘compatibility’, and thus ruled rhodopsin out of our consideration. <br/><br/>
-</p>
-<div class="floatC">
-<img src="/wiki/images/6/60/Peking2012_Design_illustration_of_function_mechanism_of_rhodopsin.png" alt="Figure 4." style="width:600px;"/>
-<p class="description">Figure 4. Illustration of function mechanism of type 1 rhodopsin. Rhodopsin has an invariant retinal chromophore. When excited by light, the retinal molecule will undergo conformational change from a cis-conformation to a trans-conformation, and causes subsequent conformational change in rhodopsin molecule and then triggers downstream effect. In type 1 rhodopsin, conformational change in rhodopsin molecule will induce ion influx.
-</p>
-</div>
-<p>
-The plant phytochrome B (PhyB) is an outstanding representative of phtochrome photosensors. PhyB photoconverts between two forms: when PhyB in its inactive form (Pr) absorbs red light, it converts into its active form (Pfr), and reconverts back into Pr form slowly, when left in the dark, or rapidly, when exposed to far red light. In its physiologically active form Pr, PhyB is able to interact with its nuclear signaling partener Phytochrome Interacting Factor 3 (PIF3) to form a dimer. By fusing DNA binding domain and transcription activating domain of GAL4 to PhyB and PIF3, respectively, scientists have been able to create a light based yeast-two-hybrid system. As a variation of the theme, scientists have managed to utilize this light-dependent protein-protein interaction to recruit cell signaling molecules to the plasma membrane of mammalian cells to trigger responses such as pseudopod formation and cell polarization. Although radiating with such promise, the phytochrome still cannot be included in our system, simply because it requires, again, the exogenous supply of chromophore (in the PhyB’s case, phycocyanobilin (PCB) ). Although solutions such as incorporating into cells metabolic pathways which will enable them to synthesize these chromophores have been proposed, these proposals will greatly complicate the process of design and application of the light-sensitive system. Although Phytochormes have been excluded from our plan, its mechanism greatly enlightened us. Those previous designs that have utilized the heterodimerization of PhyB and PIF3 have grabbed the essence of a common theme in the functioning of cellular processes—the protein-protein interaction, and have been exemplary in demonstrating a modular and versatile design. These particular characters are precisely the things we are looking for. When we are going further to seek our ideal photosensor domain, we shall keep this example in mind.
-</p>
-<div class="floatC">
-<img src="/wiki/images/f/f5/Peking2012_Design_illustration_of_function_mechanism_of_phytochrome_PhyB_PIF3_system_corrected.png" alt="Figure 5." style="width:600px;"/>
-<p class="description">Figure 5. Illustration of function mechanism of phytochrome PhyB-PIF3 system. PhyB-PIF3 system is a outstanding representative of phytochorme photosensors. PhyB utilizes a phycocyanobilin (PCB) molecule as chromophore. When exposed to red light, PhyB will convert from its Pr (inactive) form to its Pfr (active) form. Pfr can bind to PIF3 and form a heterodimer. When exposed to far-red light or kept in the dark, PhyB will convert back to its Pr form, and the dimer will disassociate.</p>
-</div>
-<p>
-Now we have come to phtotropins. We gladly found that among all these three groups of commonly used light-sensitive domains, phototropins possesses the most distinct modular structure. Phototropins have a structurally conserved light sensor domain, termed LOV (light, oxygen and voltage) domain, which is easily discernable and often precedes, within a single reading frame, a sequence of an enzymatically functional domain, connected by the sequence of a linker domain. Despite its structural modularity, the LOV light sensitive domain also seems to possess an outstanding functional modularity, for it was found to combine with various functional domains to perform various cellular functions. Several classes of LOV domain–effector domain combinations have hitherto been described, such as LOV-HKs combination, performing histidine kinase function, LOV GGDEF–EAL combination, predicted to regulate the synthesis and hydrolysis of cyclic di-GMP, and LOV_HTH combination, performing light-induced DNA binding activity. Such versatility already existing in nature strongly suggested that a newly designed artificial fusion protein that fuses the LOV photosensitive domain to a physiologically functional domain to create a non-pre-existing combination would probably work. LOV photosensor domain seems to bear much more virtue than just its modularity. LOV domains have a non-covalently bound flavin (FMN or FAD) chromophore that is absolutely essential for its function. Unlike those choromophres of rhodopsins and phytochormes, flavin is an essential chemical compound deeply involved in the respiratory chain in all forms of life, including bacteria. In another word, in order to let this LOV domain function in bacteria, we only need to incorporate the gene into the cell, and the cell will automatically supply the protein with the chromophore.<br/><br/>
 </p>
 <div class="floatC">
 <img src="/wiki/images/2/27/Peking2012_Design_illustration_of_function_mechanism_of_phototropin_VVD.png" alt="Figure 6." style="width:600px;"/>
-<p class="description">Figure 6. Illustration of function mechanism of phototropin VVD. VVD belongs to phototropin photosensor family. VVD posseses a clearly distinguishable photo-sensitive LOV domain and utilizes a FAD (flavin adenine dinucleotide) molecule as its chromophore. When excited by blue light, the N-terminal cap of VVD protein will disassociate from the LOV domain and serves as a dimerization surface for subsequent homo-dimerization. When the dimerized VVD proteins are no longer exposed to blue light, they will gradually decay back to its dark state.</p>
+<p class="description">Figure 4. Illustration of function mechanism of phototropin VVD. VVD belongs to phototropin photosensor family. VVD posseses a clearly distinguishable photo-sensitive LOV domain and utilizes a FAD (flavin adenine dinucleotide) molecule as its chromophore. When excited by blue light, the N-terminal cap of VVD protein will disassociate from the LOV domain and serves as a dimerization surface for subsequent homo-dimerization. When the dimerized VVD proteins are no longer exposed to blue light, they will gradually decay back to its dark state.</p>
 </div>
 <p>
+The physiologically functional domain of the novel sensor is the DNA binding domain of the LexA protein, a bacteria transcription repressor. In order to work well with our VVD photosensor domain, the DNA binding domain of the transcriptional factor must be easily discernable in the whole structure, and it had better been proven to function independent of the rest part of the protein. Of course, the DNA binding activity of the transcriptional factor we choose must be specific and rigorously require dimerization. LexA is just the transcription repressor that satisfy all these criteria. <br /><br />
-So far our good phototropin has satisfied two of our requirements: modularity and compatibility. So how about its sensitivity? To date, scientists have, for example, attached Rac1 protein to LOV2 domain from phototropin1 originated from <i>Avena sativa</i> to achieve photoactivatable cell motility, or shuffled the histidine kinase domain of FixL protein, which belongs to a two-component system, to the downstream of the LOV domain of <i>B. subtilis</i> YtvA protein to create a light-regulated histidine kinase, and so on. Among these designs, a particular one that utilizes the photosensor domain of a Vivid (VVD) protein, which originated from <i>Neurospora. Crassa</i>, camptured our attention. The VVD-GAL fusion protein thus designed achieved a rather high light-sensitivity—about 0.04W/m<sup>2</sup>. This is definitely thrilling news. Moreover, VVD was shown to form a rapidly exchanging homodimer upon blue-light activation, which means, like the Phy-PIF system, the general theme of protein-protein interaction might also be applied to this particular protein. Adding more promise to this VVD protein is its size—the smallest LOV domain containing protein known. This feature makes it easy to engineer and more likely to be stably expressed in bacteria systems. <br/><br/>
-Based on the discussion above, we have finally chosen the smallest LOV protein (or phototropin) VVD protein’s photosensor domain as our photoreceptor domain. Due to its small size, structural and functional modularity, bacteria compatibility, previous experience of being highly sensitive and its photoswitching mechanism, we reasoned that VVD photosensor domain would be an enabling tool in our coming design of a novel optogenetic module. <br/><br/>
-Our next step is to choose a physiologically functional domain for our new optogenetic module.
 </p>
+<div class="floatC">
+<img src="/wiki/images/0/01/Peking2012_Design_illustration_of_function_mechanism_of_LexA_transcription_repressor.png" alt="Figure 7." style="width:600px;"/>
+<p class="description">Figure 5.Illustration of function mechanism of LexA transcription repressor. LexA is the general repressor of the genes in bacteria SOS system. It is composed of a C-terminal domain (CTD), which is responsible for dimerization, and a N-terminal domain (NTD), which is responsible for DNA binding. SOS system genes possess a (some possess several) symmetrical sequence (CTGT(N)<sub>8</sub>ACAG) in their promoters, which is called the SOS box. LexA proteins will form a dimer in bacteria cell and the NTDs will recognize and bind to the SOS box in SOS promoters and thus inhibit transcription initiation.</p>
 </div>
-<div class="PKU_context floatR">
-<h3 id="title4" >Design: Choosing the Physiologically<br/>Functional Domain</h3>
 <p>
-Now we have to choose a physiologically functional domain for our optogenetic module.<br /><br />To do this, we need to decide in first place what physiological function we would like our module to achieve. Considering the limited amount of time we have, we need the function of our light-sensitive module easy to manipulate and characterize; and to make our light-sensitive module widely applicable in biotechnological field, we need its function to be modular. So we choose the most conventional and fundamental way of controlling cellular behavior as our module’s function: tuning gene expression through transcriptional control. <br /><br />
-In bacteria system, transcriptional control of gene expression is often achieved trough the association and disassociation of transcriptional factors (TF) with target sequence on or around promoter site of a particular gene. Among these bacteria Transcriptional Factors, transcription inhibitors take up the major proportion and, coincidentally, many of the inhibitors require dimerization for its inhibitory function. What’s more, these transcriptional factors that require dimerization to function usually consist a DNA binding domain. Now, based on these facts, we can envisage a rough blueprint of our design: the DNA binding domain of a transcription inhibitor shall be fused to the downstream of VVD photosensor domain, and upon blue-light activation, VVD domain will dimerize, helping the DNA binding domain dimerize at the same time to enable its DNA binding activity and inhibition of transcription initiation. <br /><br />
-But what transcription factor should we use exactly? In order to work well with our VVD photosensor domain, the DNA binding domain of the transcriptional factor must be easily discernable in the whole structure and had better been proved to function independent of the rest part of the protein. Of course, the DNA binding activity of the transcriptional factor we choose must be specific and rigorously require dimerization. <br /><br />
+LexA is a transcription repressor of all the genes in the SOS system in E.coli, and its crystal structure has been resolved at high-resolution. LexA protein consists of a N-terminal DNA binding domain and a C-terminal dimerization domain with a short hydrophilic linker linking the two separate domains, making the structure impressively modular. Beside the apparent structural modularity, various researches have utilized LexA to create versatile gene expression regulating modules that have convincingly demonstrated its functional modularity, further adding to its promise. (For example, a LexA-based genetic system has been devised for monitoring and analyzing protein heterodimerization in <i>Escherichia coli</i>.) Under normal physiological conditions, two LexA proteins will form a homodimer through the dimerization domain interface and bind to the SOS box target gene sequence in promoters of genes in SOS system and create significant steric hindrance for transcription polymerase binding and thus inhibit transcription initiation. When E.coli cell encounters some extracellular factors that would cause intracellular damage, for example, DNA breakage that would result in ssDNA formation, the RecA protein, which also belongs to the SOS family, will bind to the ssDNA to form a filament and interact with LexA and cause its auto-cleavage. The cleavage will cause the DNA binding domain to dissociate from the dimerization domain. Without the help of dimerization domain, the DNA binding domain will no longer stay in its dimerized form. LexA DNA binding domain has been shown to have a thousand-fold lower binding affinity to its target sequence in its monomer form compared to its dimerized form. Thus the cleaved LexA can no longer bind efficiently to its target sequence to block the way for transcription initiation, and the target gene will be expressed.  <br /><br />
-</p>
-<div class="floatC">
-<img src="/wiki/images/0/01/Peking2012_Design_illustration_of_function_mechanism_of_LexA_transcription_repressor.png" alt="Figure 7." style="width:600px;"/>
-<p class="description">Figure 7.Illustration of function mechanism of LexA transcription repressor. LexA is the general repressor of the genes in bacteria SOS system. It is composed of a C-terminal domain (CTD), which is responsible for dimerization, and a N-terminal domain (NTD), which is responsible for DNA binding. SOS system genes possess a (some possess several) symmetrical sequence (CTGT(N)<sub>8</sub>ACAG) in their promoters, which is called the SOS box. LexA proteins will form a dimer in bacteria cell and the NTDs will recognize and bind to the SOS box in SOS promoters and thus inhibit transcription initiation.</p>
-</div>
-<p>
-Based on these criteria, a transcription repressor,LexA, came into our sight. LexA is a transcription repressor of all the genes in the SOS system in E.coli, and its crystal structure has been resolved at high-resolution. LexA protein consists of a N-terminal DNA binding domain and a C-terminal dimerization domain with a short hydrophilic linker linking the two separate domains, making the structure impressively modular. Under normal physiological conditions, two LexA proteins will form a homodimer through the dimerization domain interface and bind to the SOS box target gene sequence in promoters of genes in SOS system and create significant steric hindrance for transcription polymerase binding and thus inhibit transcription initiation. <br /><br />
-From these facts, we can conclude that the LexA repressor is the suitable physiological functional domain for our light-sensitive module, as it matches all of our criteria. First of all, a high-resolution crystal structure clearly shows its structural modularity. Beside the apparent structural modularity, various researches have utilized LexA to create versatile gene expression regulating modules that have convincingly demonstrated its functional modularity, further adding to its promise. (For example, a LexA-based genetic system has been devised for monitoring and analyzing protein heterodimerization in <i>Escherichia coli</i>.) Moreover, the DNA binding domain of LexA rigorously requires dimerization to bind efficiently to its targeting site (SOS box), and DNA binding domain itself has no dimerization ability. Last but not least, LexA is bacteria endogenous protein, which means it is likely to be efficiently expressed and function normally in bacteria systems.<br /><br />
 </p>
 <div class="floatC">
 <img src="/wiki/images/0/0a/Peking2012_Design_process_of_building_up_our_luminesensor.png" alt="Figure 8." style="width:600px;"/>
-<p class="description">Figure 8. Procedure of building up our luminesensor. We take the N-terminal domain of LexA protein, which is responsible for DNA binding, and fused it to the N-terminal of VVD photosensor protein.Thus our luminesensor is constructed.</p>
+<p class="description">Figure 6. Procedure of building up the light sensor. We take the N-terminal domain of LexA protein, which is responsible for DNA binding, and fused it to the N-terminal of VVD photosensor protein. Thus the light sensor is constructed.</p>
 <img src="/wiki/images/1/1f/Peking2012_Design_illustration_of_function_mechanism_of_our_luminesensor.png" alt="Figure 9." style="width:600px;"/>
-<p class="description">Figure 9. Illustration of the function mechanism of our luminesensor. When exposed to blue light, the N-terminal cap of VVD domain will undock and cause VVD domain to dimerize. The dimerization of VVD protein will help the dimerization of N-terminal domains of LexA protien fused to the N-terminal of VVD domain. When helped to dimerize, the NTD of LexA protein will recognize and bind to the SOS box in the promoter of our reporter gene and inhibit transcription initiation.</p>
+<p class="description">Figure 7. Illustration of the function mechanism of the light sensor. When exposed to blue light, the N-terminal cap of VVD domain will undock and cause VVD domain to dimerize. The dimerization of VVD protein will help the dimerization of N-terminal domains of LexA protien fused to the N-terminal of VVD domain. When helped to dimerize, the NTD of LexA protein will recognize and bind to the SOS box in the promoter of our reporter gene and inhibit transcription initiation.</p>
 </div>
 <p>
-With the discussion above, we have decided to use DNA binding domain of LexA repressor protein as the physiologically functional domain. With a flexible linker linking the two distinct domains, we now have the panorama of our design of photosensitive fusion protein. We term this VVD-LexA based photosensitive fusion protein ‘<i>Luminesensor</i>’.
+Using DNA binding domain of LexA repressor protein as the physiologically functional domain and a flexible linker linking the two distinct domains, we now have the panorama of our design of photosensitive fusion protein. In the dark, the light sensor would be in monomer form and unable to bind target DNA sequence. When exited by blue light, the VVD domain of the sensor will undergo conformational change and expose its N-terminal cap and induce the light-sensor to dimerize and bind to the target DNA sequence and inhibit transcription initiation. Thus the light sensor will function as a light inducible transcription repressor, generating a light-off system.
 </p>
 </div>
@@ Line 108: / Line 91: @@
 <h3 id="title5" >Design: Ensuring Orthogonality</h3>
 <p>
-Perhaps a careful reader has already noticed a severe defect in our design. That is, by choosing the DNA binding domain of a bacteria endogenous transcription repressor, we must use reporter genes that will also be repressed by endogenous LexA protein. If we do not introduce changes into the DNA binding domain of our luminesensor, the only way to rule out the interference of endogenous LexA would be knocking out the genomic sequence of LexA protein. This will indubitably diminish its applicability in the future, since it will not work in any strain with endogenous LexA remaining. <br /><br />
+Perhaps a careful reader has already noticed a severe defect in our design. That is, by choosing the DNA binding domain of a bacteria endogenous transcription repressor, we must use reporter genes that will also be repressed by endogenous LexA protein. If we do not introduce changes into the DNA binding domain of the light sensor, the only way to rule out the interference of endogenous LexA would be knocking out the genomic sequence of LexA protein. This will indubitably diminish its applicability in the future, since it will not work in any strain with endogenous LexA remaining. (For details see <a href="/Team:Peking/Modeling/Luminesensor/Orthogonality" title="">Modeling Luminesensor Orthogonality</a>)<br />
 </p>
 <div class="floatC">
    <img src="/wiki/images/a/ad/Peking2012_Design_LexA408mutations.png" alt="Figure 9. Mutation 3" title="Figure 9. Mutation 3" style="width:500px;" />
     <p class="description">
-Figure 10. A molecular structure of N-terminal domain of LexA protein. The arrow points to the position of residue 40, 41 and 42. In LexA408 protein, three point mutations P40A, N41S and A42S  are introduced into the N-terminal domain. These three mutations near the DNA binding surface of the protein will change its binding specificity. LexA408 will recognize a symmetrically altered sequence different from the one recognized by wild type LexA.</p>
+Figure 8. A molecular structure of N-terminal domain of LexA protein. The arrow points to the position of residue 40, 41 and 42. In LexA408 protein, three point mutations P40A, N41S and A42S  are introduced into the N-terminal domain. These three mutations near the DNA binding surface of the protein will change its binding specificity. LexA408 will recognize a symmetrically altered sequence different from the one recognized by wild type LexA.</p>
   </div>
 <div class="floatC">
 <img src="/wiki/images/a/a4/Peking2012solution_to_the_orthogonality_problem_correction_2nd.png" alt="Figure 10." style="width:600px;"/>
-<p class="description">Figure 11. Our solution to the problem of orthogonality. We found that a LexA variant LexA408 will only recognize a symmetrically altered SOS box (CCGT(N)<sub>8</sub>ACGG), different form the original one (CTGT(N)<sub>8</sub>ACAG). So we changed the LexA NTD domain of our wild type luminesensor to its 408 form, and changed the SOS box in our reporter gene promoters correspondingly. Now the endogenous LexA protein will no longer bind to the promoters of our reporter gene, while our luminesensor still possessing the light-inducible repression function. Thus we ensured our system's orthogonality to the bacteria SOS system.</p>
+<p class="description">Figure 9. Our solution to the problem of orthogonality. We found that a LexA variant LexA408 will only recognize a symmetrically altered SOS box (CCGT(N)<sub>8</sub>ACGG), different form the original one (CTGT(N)<sub>8</sub>ACAG). So we changed the LexA NTD domain of the wild type light sensor to its 408 form, and changed the SOS box in our reporter gene promoters correspondingly. Now the endogenous LexA protein will no longer bind to the promoters of our reporter gene, while the light sensor still possessing the light-inducible repression function. Thus we ensured the light-off system's orthogonality to the bacteria SOS system.</p>
 </div>
 <p>
-So we set out to find a solution to this important problem. The most natural way would be creating a mutated form of LexA so that it will only recognize a target sequence different from the sequence the wild-type LexA would recognize. We gladly found that such a thing actually exists. It is called the LexA408 variant, which carries mutations PA40, NS41 and AS42 and has been shown much higher affinity for a symmetrically altered target sequence CCGT (N)<sub>8</sub> ACGG, different from the wild type SOS box CTGT (N)<sub>8</sub> ACAG, which is specifically recognized by wild-type LexA. Thus by introducing the 408 mutations into the DNA binding domain of our luminesensor, we can insulate our light-sensitive system from the interference from the genetic context of the host strain. This outstanding character that have ensured the orthogonality of our system to the endogenous SOS system will greatly enhance the compatibility of our module to those synthetic modules that have hitherto been designed and thus add to the promise of future application.
-</p>
-</div>
-<div class="PKU_context floatR">
-<h3 id="title6" >Design: Dynamic Performance Optimization</h3>
-<p>Though our <i>Luminesensor</i> has outshined many previously designed optogenetic modules in many aspects, space still remains for its improvement. A particularly important matter would be the dynamic performance of our <i>Luminesensor</i>. Signal-background ratio is always a significant judging criterion in synthetic modules. The more digital-like the output may be, the more likely the module would function efficiently in a complex biological system where wanted and unwanted noises are inevitable. Though our <i>Luminesensor</i> has already shown a high background-signal ratio, we still deem dynamic range optimization necessary, since background-signal ratio can never be too high. Another concern would be whether the system is resettable. In our <i>Luminesensor</i> system, this equals to say whether our <i>Luminesensor</i> will be able to decay back fast to its dark state when it is no longer exposed to light. This is particular important when our system is to be applied in a scenario where cell movement is inevitable. For example, imagine we are using liquid medium to culture our <i>Luminesensor</i> containing bacteria and applying to a proportion of the medium blue light to inhibit reporter gene, say GFP, expression to create some sort of pattern, cells that have received blue light will constantly swim out of the illuminated area. If our <i>Luminesensor</i>’s decay half-life is very long, the light-received cells will eventually distribute evenly in those dark area, so no pattern would form. Unfortunately, VVD protein, the photosensor domain we use, has a typical light-to-dark decay half-life of hours. This makes our decay half-life optimization extremely important. <br/><br/>
-In order to rationally optimize our <i>Luminesensor</i>’s dynamic range and decay half-life, we need to build a dynamic model in the first place to simulate our <i>Luminesensor</i> system and determine which ones of those parameters in the system would be decisive to the two dynamic features we are interested in. <br/><br/>
-We listed all possible states of the molecules involved in our <i>Luminesensor</i> system and transitions between those states and created an ordinary deferential equation system based on law of mass action to describe the dynamic behavior of our system. After in-silico simulation, we singled out 4 critical parameters in our system that would determine the above two aspects of our system’s dynamic performance. </p>
+So we set out to find a solution to this important problem. The most natural way would be creating a mutated form of LexA so that it will only recognize a target sequence different from the sequence the wild-type LexA would recognize. We were happy to discover that such a thing actually exists. It is called the LexA408 variant, and it carries mutations PA40, NS41 and AS42, and has been shown to have much higher affinity for a symmetrically altered target sequence CCGT (N)<sub>8</sub> ACGG, different from the wild type SOS box CTGT (N)<sub>8</sub> ACAG, which is specifically recognized by the wild-type LexA. Thus, by introducing the 408 mutations into the DNA binding domain of the light sensor, we can insulate the light-off system from the interference from the genetic context of the host strain. This outstanding characteristic ensures the orthogonality of our system to the endogenous SOS system will greatly enhance the compatibility of our module to those synthetic modules that have hitherto been designed and thus adds to the promise of future application.
- <div class="floatC">
-  <img src="/wiki/images/3/3a/Peking2012_LuminesensorNodes.png" alt="Network System Fig" style="width:500px;"/>
-  <p class="description">Figure 12. Kinetic Network of our Luminesensor system. This figure shows all possible states of our luminesensor reporter gene system and all possible reactions that will lead to interconversion between these states. All parameters are marked on their corresponding position.</p>
-  <img src="/wiki/images/5/5f/Peking2012_Formula000.png" alt="Figure 12." style="width:500px;"/>
-  <p class="description">Figure 13. Ordinary differential equations describing the kinetic behavior of our luminesensor system. All the ordinary differential equations were built based on the kinetic network above.</p>
- </div>
-<p>
-Two of them will affect the background-signal ratio, namely the VVD protein dimerization equilibrium constant and dimerized <i>Luminesensor</i>’s DNA binding equilibrium constant. This is easy to understand intuitively. Because the tighter the <i>Luminesensor</i>s dimerize when illuminated by light, the greater the intracellular concentration of dimerized <i>Luminesensor</i> will be. And the tighter the dimerized <i>Luminesensor</i>s bind the target DNA sequence, the greater proportion of target gene will be repressed, thus reducing the background of reporter gene expression under light. The other two parameters are responsible for the decay half-life, namely the rate constant of VVD photosensor domain’s decaying from the light-state back to its dark-state and rate constant of monomer luminesenor’s disassociating form target DNA sequence. This is also easy to understand intuitively. The faster the VVD proteins decay back to its dark-state, the faster the <i>Luminesensor</i> will turn from it dimerized form to its monomer form, which is significantly less efficient in binding target DNA sequence. And the faster the monomer <i>Luminesensor</i>s disassociate from the target sequence, the faster the steric hindrance to RNA polymerase created by DNA-bound <i>Luminesensor</i>s will be lifted, thus reducing the amount of time required for the system to reset. <br/><br/>
 </p>
-<div class="floatC">
- <img src="/wiki/images/7/78/Peking2012_Design_optimization_intuitive_understanding.png" alt="Figure 13." style="width:500px;"/>
- <p class="description">Figure 14. An intuitive understanding of the importance of parameter K<sub>2</sub> (luminesensor dimerization equilibrium constant), K<sub>5</sub> (luminesensor dimer DNA binding equilibrium constant), k<sub>1</sub> (VVD domain decay rate constant) and k<sub>3</sub> (luminesensor monomer DNA disassociation rate constant). As described in the text, K<sub>2</sub> increment will push equilibrium towards luminesensor dimerization, and K<sub>5</sub> increment will push equilibrium towards dimerized luminesensor's DNA binding, thus reducing reporter gene expression background under light. Similarly, k<sub>1</sub> and k<sub>3</sub> will accelarate dissociation of monomer luminesensor from DNA and dark-state luminesensor formation, thus precipitating system reset.</p>
- </div>
- <p>
-Having singled out these four critical parameters, we set out to search through literature to find mutations that would enhance them. We found that there does not seem to exist mutations that would enhance dimerized <i>Luminesensor</i>’s DNA binding equilibrium constant. Rather, those mutations seem to undermine the DNA binding affinity, which would be detrimental to our system. We further reasoned that any mutation that would facilitate the disassociation of monomer <i>Luminesensor</i>s from target DNA sequence is also likely to undermine the DNA binding affinity. So we focused on looking for VVD photosensor domain mutations that would promote VVD dimerization and VVD decay. We eventually localized on two specific mutations of VVD photosensor domain: a M135I mutation that will enhance the VVD dimerization, and a I74V mutation in the vicinity of FAD molecule that will enhance the VVD decay rate. <br/><br/>
-</p>
- <div class="floatC">
-  <img src="/wiki/images/1/16/Peking2012_Modeling_Optimization_74.png" alt="Figure 5. Mutation 1" title="Figure 5. Mutation 1" style="width:500px;" />
-   <p class="description">
-Figure 15. A molecular structure of VVD protein marking the position of residue 74. As shown in the figure, residue 74 (originaly isoleucine) resides in the vicinity of FAD (flavin adenine dinucleotide) molecule (the chromophore of VVD protein) and residue cystine 108. When VVD is excited by light, a covalent bound will form between residue cystine 108 and C<sub>4</sub> of FAD, leading to VVD's conformational change to its light-state. The mutation I74V will interact with Cystine 108 and FAD molecule to destablize the adduct form, accelarating VVD's decay back to its dark-state.
-   </p>
-  <img src="/wiki/images/f/f4/Peking2012_Modeling_Optimization_135.png" alt="Figure 6. Mutation 2" title="Figure 6. Mutation 2" style="width:500px;" />
-   <p class="description">
-Figure 16. A molecular structure of VVD protein marking the position of residue 135. As shown in the figure, residu 135(originally methionine) also resides near the FAD molecule. M135I is proposed to change the electronic environment of FAD molecule and somehow enhance VVD dimerization (possibly by stablizing light-state). The exact molecule mechanism is unclear.
-   </p>
 </div>
-<p>
-Having determined the plausible mutations, when then introduced mutation M135I, I74V and the combination of the two mutations into our 408 form of <i>Luminesensor</i>. By characterizing the dynamic behavior of the mutated <i>Luminesensor</i> along time course, we discovered that mutation M135I indeed improved the signal-background ratio significantly. However, I74V mutation seems to reduce the signal-background ratio dramatically, rendering our <i>Luminesensor</i> useless. So disregarding of the faster decay half-life it may provide, we have to rule I74V out of our design. </p>
-</div>
 <div class="PKU_context floatR">
   <h3 id="title7">Reference</h3>