Team:University College London/Module 3/Modelling

From 2012.igem.org

(Difference between revisions)
(Modelling)
(Impact on experimental work)
 
(47 intermediate revisions not shown)
Line 5: Line 5:
== Modelling ==
== Modelling ==
-
Our gene network model for this module shows the amount of laccase produced by our bacteria.  We have used this prediction to find out how many bacteria would be required per cubic meter of sea water in order to effectively degrade polyethylene-based plastics.
+
Building upon our earlier [[Team:University_College_London/Module_1/Modelling |cell model for detection]] of polyethylene, our cell model for the degradation module aimed to show the amount of laccase our bacteria produce and its role in the degradation of one type of microplastic present in the gyre, polyethyleneWith this model we aimed to have an idea of how much plastic we could expect our system to degrade. This would then be used in further [[Team:University_College_London/Modelling/DensityPredictions |predictive modelling]] to calculate the amount of bacteria needed for the construction of Plastic Republic. The following diagram shows the degradation system, with each reaction R<sub>i</sub> and each DNA species explained below.
 +
 
 +
[[File:deggraph.jpg]]
 +
 
 +
Our cell model was made in SimBiology, which is a MATLAB extension used to run simulations of the reactions in a specified system. It shows the following reactions taking place in three 'compartments', with each DNA species and reaction explained in further detail below:
 +
 
 +
 
 +
1. '''Outside1:''' in this compartment we see the association, adherence, and dissociation of persistent organic pollutants (POPs) from polyethylene (PE) (R1). We rely on the POPs to induce our degradation system, increasing from 10<sup>5</sup> to 10<sup>6</sup> the specificity to our system.
 +
 
 +
 
 +
2. '''Cell:''' NahR is a constitutively produced mRNA product (R9). When POP diffuses into the cell (R2), it forms a complex with NahR (R3) which then binds to the pSal promoter (R4) to induce production of laccase (R5, R6).  Around 20% of this laccase diffuses outside of the cell (R7), the rest degrades (R10).
 +
 
 +
 
 +
3.''' Outside2:''' in this compartment, the external laccase degrades PE (R9).  Some of this external laccase is degraded (R11).
 +
 
 +
==Species present in the cell model==
{| class="bigtable"
{| class="bigtable"
|-
|-
-
! Species!! Initial value (molecules) !! Notes  
+
! Species!! Initial value (molecules) !! Notes & Assumptions
|-
|-
-
| PE|| 0.044 || Polyethylene found in North Pacific Gyre per cubic metre<sup>1,2</sup>
+
| PE|| 0.044 || Polyethylene found in North Pacific Gyre (value per cubic metre)<sup>1,2</sup>
|-
|-
| POPex || 0.0 || Persistent organic pollutants (ex = extracellular) that are not adhered to plastic surface
| POPex || 0.0 || Persistent organic pollutants (ex = extracellular) that are not adhered to plastic surface
|-
|-
-
| PEPOPex || 9.24E-5 || Persistent organic pollutants (ex = extracellular) that are adhered to the plastic surface
+
| PEPOPex || 9.24E-5 || Persistent organic pollutants (ex = extracellular) that are adhered to the plastic surface<sup>6</sup>
|-
|-
-
| POPin || 0.5 || Persistent organic pollutants (in = intracellular) assumed from <i>E. coli</i> membrane permeability  
+
| POPin || 0.5 || Persistent organic pollutants (in = intracellular) assumed from <i>E. coli</i> membrane permeability <sup>4</sup>
|-
|-
| mRNANahR || 0.0|| NahR mRNA product
| mRNANahR || 0.0|| NahR mRNA product
Line 35: Line 50:
| PEdegp || 0.0 || Polyethylene degraded by laccase
| PEdegp || 0.0 || Polyethylene degraded by laccase
|}
|}
 +
 +
==Reactions taking place in the model==
 +
 +
{| class="bigtable"
{| class="bigtable"
|-
|-
-
! Number !! Reaction !! Reaction rate (molecules/sec) !! Notes  
+
! Number !! Reaction !! Reaction rate (molecules/sec) !! Notes & Assumptions
|-
|-
-
| R1 || PE + POPex ↔ PEPOPex || Forward: 1000 <br /> Backward: 1 || Pops have 1000 to 10000 times greater tendency to adhere to plastic than float free in the ocean
+
| R1 || PE + POPex ↔ PEPOPex || Forward: 10000 <br /> Backward: 1 || Pops have 10000 to 100000 times greater tendency to adhere to plastic than float free in the ocean<sup>5</sup>
|-
|-
-
| R2 || POPex ↔ POPin || Forward: 0.6 <br /> Backward: 0.4 || Based on membrane permeability: diffusion gradient
+
| R2 || POPex ↔ POPin || Forward: 0.6 <br /> Backward: 0.4 || Rate is based on membrane permeability<sup>4</sup> and the diffusion gradient
|-
|-
-
| R3 || POPin + mRNA.Nahr POPin.mRNA.Nahr || Forward: 1 <br /> Backward: 0.0001 || Based on the assumption that the chemical structure/size of POPs is similar to salycilate.  Salycilate binds to the NahR mRNA product, which complex then binds to the pSal promoter.
+
| R3 || POPin + mRNA.Nahr POPin.mRNA.Nahr || Forward: 1 <br /> Backward: 0.0001 || Based on the assumption that the chemical structure/size of POPs is similar to salycilate<sup>6</sup>.  Salycilate binds to the NahR mRNA product, which complex then binds to the pSal promoter.
|-
|-
-
| R9 || 0 → mRNA.Nahr || Forward: 0.088 <br /> Backward: 0.6 || Transcription rate of NahR in molecules/sec (for NahR size 909 bp<sup>2</sup>, transcription rate in E.coli 80bp/sec<sup>7</sup>) under constitutive promoter control
+
| R4 || POPinmRNANahr ↔ POPinmRNANahr.Psal || Forward: 78200 <br /> Backward: 0.191 <sup>9</sup> || NahR to pSal binding based on the assumption that POP-NahR binding has no effect on NahR-pSal binding
|-
|-
-
| R4 || POPinmRNANahr → POPinmRNANahr.Psal || Forward: 78200 <br /> Backward: 0.191 <sup>4</sup> || NahR to pSal binding based on the assumption that POP-NahR binding has no effect on NahR-pSal binding
+
| R5 || POPexmRNANahr.Psal → Lin.mRNA|| 0.054 || Transcription rate of Laccase in molecules/sec (for laccase size 1500 bp<sup>10</sup>, transcription rate in E.coli 80bp/sec<sup>8</sup>)
|-
|-
-
| R5 || POPexmRNANahr.Psal → Lin.mRNA|| 0.054 || Transcription rate of Laccase in molecules/sec (for laccase size 1500 bp<sup>1</sup>, transcription rate in E.coli 80bp/sec<sup>7</sup>)
+
| R6 || Lin.mRNA → Lin|| 0.04 || Translation rate of Laccase in molecules/sec (for laccase size 500 aa<sup>10</sup>, translation rate in E.coli 20aa/sec<sup>8</sup>)
|-
|-
-
| R6 || Lin.mRNA → Lin|| 0.04 || Translation rate of Laccase in molecules/sec (for laccase size 500 aa, translation rate in E.coli 20aa/sec<sup>7</sup>)
+
| R7 || Lin ↔ Lex || Forward: 0.9 <br /> Backward: 0.1 || Our laccase is a periplasmic enzyme, therefore most of it is released in the periplasm. However, we assumed leakage of 20 percent based on suboptimal conditions in the periplasm<sup>12</sup>, which is able to degrade polyethene.
|-
|-
-
| R11 || Lin Lindegp || 0.03 || Degradation rate of laccase must be taken into account due to suboptimal conditions
+
| R8 || Lex PEdegp || Vm: 0.01 <br /> Km: 0.114 || Michaelis-Menten kinetics is used to represent degradation of polyethylene. As the literature values for the Km and Kcat for the polyethylene by laccase are not yet obtained experimentally for the original starin that was observed being able to degrade polyethylene<sup>13</sup> we made an assumption that degradation of polyethylene is similar to that of lignin (due to polymeric nature of both), values for both Km and Kcat were taken from the literature<sup>14</sup>
|-
|-
-
| R7 || Lin → Lex || Forward: 0.9 <br /> Backward: 0.1 || Our laccase is a periplasmic enzyme, therefore most of it is released in the periplasm.  However, we assumed leakage of 20 percent based on suboptimal conditions in the periplasm<sup>8</sup>, which is able to degrade polyethene.
+
| R9 || 0 ↔ mRNA.Nahr || Forward: 0.088 <br /> Backward: 0.6 || Transcription rate of NahR in molecules/sec (for NahR size 909 bp<sup>7</sup>, transcription rate in E.coli 80bp/sec<sup>8</sup>) under constitutive promoter control
|-
|-
-
| R8 || Lex PEdegp || Vm: 0.01 <br /> Km: 0.114 || Michaelis-Menten kinetics is used to represent degradation of polyethylene. As the literature values for the Km and Kcat for the polyethylene by laccase are not yet obtained experimentally for the original starin that was observed being able to degrade polyethylene(c208 ref) we made an assumption that degradation of polyethylene is similar to that of lignin (due to polymeric nature of both), values for both Km and Kcat were used from<sup>5</sup>
+
| R10 || 0 ↔ Lin || ? || Transcription rate of Lin in molecules/sec
 +
|-
 +
| R11 || Lin Lindegp || 0.03 || Degradation rate of laccase<sup>11</sup> must be taken into account due to suboptimal conditions
|}
|}
-
[[File:degradationnet.jpg]]
+
== Results ==
-
We ran three simulations in SimBiology, each over a different timespan:
 
-
[[File:deg1.png]] comment here?
+
We ran three simulations in SimBiology, each over a different timespan to analyse how laccase production changed over time. In the first second of laccase production, we see polyethylene degradation beginning from around 0.6 sec:
-
[[File:deg2.png]] comment here?
 
-
[[File:deg3.png]] comment here?
+
[[File:deg1.png]]  
-
1. Goldstein M, Rosenberg M, Cheng L (2012) Increased oceanic microplastic debris enhances oviposition in an endemic pelagic insect, <i>Biology Letters</i> 10.1098
 
-
2. Andrady AL (2011) Microplastics in the marine environment. <i>Marine Pollution Bulletin</i> 62: 1596-1605
+
After 10 seconds, the first few molecules have been degraded. The constant diffusion of POPs into the cell is essential for the continuing degradation:
-
1. Laccase size: http://partsregistry.org/Part:BBa_K729002
+
[[File:deg2.png]]
-
2. NahR size: http://www.xbase.ac.uk/genome/azoarcus-sp-bh72/NC_008702/azo2419;nahR1/viewer
+
At 100 seconds, the rate of degradation has risen to almost 1 PE molecule per second and we can assume that this will continue as long as the supply of POPs remains constant:
-
3. Mato Y, Isobe T, Takada H, Kanehiro H, Ohtake C, Kaminuma T (2001) Plastic Resin Pellets as a Transport Medium for Toxic Chemicals in the Marine Environment. <i>Environ. Sci. Technol.</i> 35: 318-324
+
[[File:deg3.png]]
-
4. Teuten E, Saquing J, Knappe D et al. (2009) Transport and release of chemicals from plastics to the environment and to wildlife. <i>Philosophical transactions of the Royal Society of London</i> 364: 2027-2045
 
-
7. http://kirschner.med.harvard.edu/files/bionumbers/fundamentalBioNumbersHandout.pdf
+
From these results, we can see that our bacteria will degrade polyethylene linearly after an initial non-linear increase in degradation. However, these graphs do not indicate which factors, such as initial concentrations, parameter values and environmental conditions are affecting degradation. For this reason, we decided to run a sensitivity analysis on our model to test the robustness of the model.
-
8. Young K, Silver LL (1991) Leakage of periplasmic enzymes from envA1 strains of Escherichia coli. <i>J Bacteriol.</i> 173: 3609–3614
+
== Sensitivity analysis ==
-
11.Van A, Rochman C, Flores E, Hill K, Vargas E, Vargas S, Hoh E (2012) Persistent organic pollutants in plastic marine debris found on beaches in San Diego, California. <i>Chemosphere</i> 86: 258-263
+
We used SimBiology's sensitivity analysis tool to compute the sensitivity of the cell to variations in each model parameter and the initial amount of each DNA species. The aim was to find out how each of these impacts on the final concentrations of degraded PE and laccase.  
-
12. Santo M, Weitsman R, Sivan A (2012) The role of the copper-binding enzyme - laccase - in the biodegradation of polyethylene by the actinomycete <i>Rhodococcus ruber.  International Biodeterioration & Biodegradation</i> 208: 1-7
 
 +
The results show that the amount of PE degraded is dependent on the kinetics of the laccase reaction (see the paramters labelled R8.k17 and R8.k19 in the upper bars in the diagram below, which correspond to the Vm and Km values  of laccase respectively). On the other hand, the amount of laccase degraded outside the cell is most dependent on the translation rate of laccase (see the parameter R6.k20 in the lower bars of the diagram). In addition, it also moderately affected by the rate of diffusion of laccase outside of the cell (see R7.p10) and therefore on the amount of laccase which ends up outside of the cell (Lexdegp).
-
POPS & PLASTIC QUANTITITES
+
The original aim in the development of the degradation model was to analyse the effect of POP, which acts as an environmental factor, on PE degradation. However, through the use of sensitivity analysis, it was deduced that there are more important parameter considerations (such as enzyme activity and translation rates) to take into account. It is reasonable to assume that POP levels are present in constant amounts, hence allowing for degradation of PE which varies with the translation rates and enzyme activity. 
-
Rios L, Moore C, Jones P (2007) Persistent organic pollutants carried by synthetic polymers in the ocean environment.  <i>Marine Pollution Bulletin</i> 54: 1230–1237
 
-
Takada H, et al (2010) Global distribution of organic micropollutants in marine plastics. Report to Algalita Marine Research Institute
+
[[File:degsens.jpg]]
-
Heskett M, Takada H, Yamashita R, Yuyama M, Ito M, Geok YB, Ogata Y, Kwan C, Heckhausen A, Taylor H, Powell T, Morishige C, Young D, Patterson H, Robertson B, Bailey E, Mermoz J (2012) Measurement of persistent organic pollutants (POPs) in plastic resin pellets from remote islands: Toward establishment of background concentrations for International Pellet Watch.  <i>Marine Pollution Bulletin</i> 64: 445-448
+
== Impact on experimental work ==
 +
We initially believed that it was the amount of POPs present in the environment, rather than the specific activity of the enzyme used and the laccase translation rates, which would have the greatest effect on the amount of polyethylene degraded.  Thus, although we had initially identified <i>Rhodococcus ruber</i> C208 laccase strain<sup>13</sup> to use in the degradation of polyethylene, we now decided to use a laccase which was easier to obtain (<i>E. coli</i>).
 +
 +
 +
Following the results of the sensitivity analysis, we realised that using a laccase with greater specific activity on PE would have a measurable impact on the amount of plastic our system can degrade. Hence, future modifications to our system will use ''R. ruber'' C208 laccase.
 +
 +
== References ==
 +
 +
1. Goldstein M, Rosenberg M, Cheng L (2012) Increased oceanic microplastic debris enhances oviposition in an endemic pelagic insect, <i>Biology Letters</i> 10.1098
 +
 +
2. Andrady AL (2011) Microplastics in the marine environment. <i>Marine Pollution Bulletin</i> 62: 1596-1605
 +
4. Kay J, Koivusalo M, Ma X, Wohland T, Grinstein S (2012) Phosphatidylserine Dynamics in Cellular Membranes. <i>Molecular Biology of the Cell</i>
-
4. Park H, Lim W, Shin H (2005) In vitro binding of purified NahR regulatory protein with promoter Psal. <i>Biochimica et Biophysica Acta</i> 1775: 247-255
+
5. Mato Y, Isobe T, Takada H, Kanehiro H, Ohtake C, Kaminuma T (2001) Plastic Resin Pellets as a Transport Medium for Toxic Chemicals in the Marine Environment. <i>Environ. Sci. Technol.</i> 35: 318-324
-
5. Ding Z, Peng L, Chen Y, Zhang L, Gu Z, Shi G, Zhang K (2012) Production and characterization of thermostable laccase from the mushroom, Ganoderma lucidum, using submerged fermentation.  <i>African Journal of Microbiology Research</i> 6: 1147-1157DOI: 10.5897/AJMR11.1257
+
6.  https://2011.igem.org/Team:Peking_S/project/wire/harvest
-
6 Kunamneni A, Plou FJ, Ballesteros A, and Alcalde M. Laccases and their applications: A patent review. Departamento de Biocatálisis, Instituto de Catálisis y Petroleoquímica, CSIC, Cantoblanco, 28049 Madrid, Spain.
+
7. http://www.xbase.ac.uk/genome/azoarcus-sp-bh72/NC_008702/azo2419;nahR1/viewer
-
7. BRENDA: EC 1.10.3.2 – laccase
+
8. http://kirschner.med.harvard.edu/files/bionumbers/fundamentalBioNumbersHandout.pdf
-
8. E.COLI MEMBRANE PERMEABILITY
+
9. Park H, Lim W, Shin H (2005) In vitro binding of purified NahR regulatory protein with promoter Psal. <i>Biochimica et Biophysica Acta</i> 1775: 247-255
-
Heskett M, Takada H, Yamashita R, Yuyama M, Ito M, Geok YB, Ogata Y, Kwan C, Heckhausen A, Taylor H, Powell T, Morishige C, Young D, Patterson H, Robertson B, Bailey E, Mermoz J (2012) Measurement of persistent organic pollutants (POPs) in plastic resin pellets from remote islands: Toward establishment of background concentrations for International Pellet Watch.   <i>Marine Pollution Bulletin</i> 64: 445-448                is this right? This is what’s on excel
+
10. Laccase size: http://partsregistry.org/Part:BBa_K729002
-
7. DIFFERENT REGULATOR SYSTEMS
+
11. Kushner S (2002) mRNA Decay in <i>Escherichia coli</i> Comes of Age. <i>J Bacteriol.</i> 184: 4658-4665
-
Wang B, Papamichail D, Mueller S, Skiena S (2007) Two Proteins for the Price of One: The Design of Maximally Compressed Coding Sequences. DOI: 10.1.1.174.6416
+
 +
12. Young K, Silver LL (1991) Leakage of periplasmic enzymes from envA1 strains of Escherichia coli. <i>J Bacteriol.</i> 173: 3609–3614
 +
13. Santo M, Weitsman R, Sivan A (2012) The role of the copper-binding enzyme - laccase - in the biodegradation of polyethylene by the actinomycete <i>Rhodococcus ruber.  International Biodeterioration & Biodegradation</i> 208: 1-7
 +
14. 5. Ding Z, Peng L, Chen Y, Zhang L, Gu Z, Shi G, Zhang K (2012) Production and characterization of thermostable laccase from the mushroom, Ganoderma lucidum, using submerged fermentation.  <i>African Journal of Microbiology Research</i> 6: 1147-1157.  DOI: 10.5897/AJMR11.1257
{{:Team:University_College_London/templates/foot}}
{{:Team:University_College_London/templates/foot}}

Latest revision as of 23:06, 26 September 2012

Contents

Module 3: Degradation

Description | Design | Construction | Characterisation | Modelling | Results | Conclusions

Modelling

Building upon our earlier cell model for detection of polyethylene, our cell model for the degradation module aimed to show the amount of laccase our bacteria produce and its role in the degradation of one type of microplastic present in the gyre, polyethylene. With this model we aimed to have an idea of how much plastic we could expect our system to degrade. This would then be used in further predictive modelling to calculate the amount of bacteria needed for the construction of Plastic Republic. The following diagram shows the degradation system, with each reaction Ri and each DNA species explained below.

Deggraph.jpg

Our cell model was made in SimBiology, which is a MATLAB extension used to run simulations of the reactions in a specified system. It shows the following reactions taking place in three 'compartments', with each DNA species and reaction explained in further detail below:


1. Outside1: in this compartment we see the association, adherence, and dissociation of persistent organic pollutants (POPs) from polyethylene (PE) (R1). We rely on the POPs to induce our degradation system, increasing from 105 to 106 the specificity to our system.


2. Cell: NahR is a constitutively produced mRNA product (R9). When POP diffuses into the cell (R2), it forms a complex with NahR (R3) which then binds to the pSal promoter (R4) to induce production of laccase (R5, R6). Around 20% of this laccase diffuses outside of the cell (R7), the rest degrades (R10).


3. Outside2: in this compartment, the external laccase degrades PE (R9). Some of this external laccase is degraded (R11).

Species present in the cell model

Species Initial value (molecules) Notes & Assumptions
PE 0.044 Polyethylene found in North Pacific Gyre (value per cubic metre)1,2
POPex 0.0 Persistent organic pollutants (ex = extracellular) that are not adhered to plastic surface
PEPOPex 9.24E-5 Persistent organic pollutants (ex = extracellular) that are adhered to the plastic surface6
POPin 0.5 Persistent organic pollutants (in = intracellular) assumed from E. coli membrane permeability 4
mRNANahR 0.0 NahR mRNA product
POPinNahR 0.0 Complex of the above two molecules
POPinNahRpSal 0.0 Complex of the above molecule and pSal (promoter that induces laccase transcription)
Lin 0.0 Intracellular laccase
Lex 0.0 Extracellular laccase
LinmRNA 0.0 Laccase mRNA product
Ldegp 0.0 Laccase that degrades due to suboptimal conditions and malformed laccase that cannot carry out polyethylene degradation
PEdegp 0.0 Polyethylene degraded by laccase

Reactions taking place in the model

Number Reaction Reaction rate (molecules/sec) Notes & Assumptions
R1 PE + POPex ↔ PEPOPex Forward: 10000
Backward: 1
Pops have 10000 to 100000 times greater tendency to adhere to plastic than float free in the ocean5
R2 POPex ↔ POPin Forward: 0.6
Backward: 0.4
Rate is based on membrane permeability4 and the diffusion gradient
R3 POPin + mRNA.Nahr ↔ POPin.mRNA.Nahr Forward: 1
Backward: 0.0001
Based on the assumption that the chemical structure/size of POPs is similar to salycilate6. Salycilate binds to the NahR mRNA product, which complex then binds to the pSal promoter.
R4 POPinmRNANahr ↔ POPinmRNANahr.Psal Forward: 78200
Backward: 0.191 9
NahR to pSal binding based on the assumption that POP-NahR binding has no effect on NahR-pSal binding
R5 POPexmRNANahr.Psal → Lin.mRNA 0.054 Transcription rate of Laccase in molecules/sec (for laccase size 1500 bp10, transcription rate in E.coli 80bp/sec8)
R6 Lin.mRNA → Lin 0.04 Translation rate of Laccase in molecules/sec (for laccase size 500 aa10, translation rate in E.coli 20aa/sec8)
R7 Lin ↔ Lex Forward: 0.9
Backward: 0.1
Our laccase is a periplasmic enzyme, therefore most of it is released in the periplasm. However, we assumed leakage of 20 percent based on suboptimal conditions in the periplasm12, which is able to degrade polyethene.
R8 Lex → PEdegp Vm: 0.01
Km: 0.114
Michaelis-Menten kinetics is used to represent degradation of polyethylene. As the literature values for the Km and Kcat for the polyethylene by laccase are not yet obtained experimentally for the original starin that was observed being able to degrade polyethylene13 we made an assumption that degradation of polyethylene is similar to that of lignin (due to polymeric nature of both), values for both Km and Kcat were taken from the literature14
R9 0 ↔ mRNA.Nahr Forward: 0.088
Backward: 0.6
Transcription rate of NahR in molecules/sec (for NahR size 909 bp7, transcription rate in E.coli 80bp/sec8) under constitutive promoter control
R10 0 ↔ Lin  ? Transcription rate of Lin in molecules/sec
R11 Lin → Lindegp 0.03 Degradation rate of laccase11 must be taken into account due to suboptimal conditions

Results

We ran three simulations in SimBiology, each over a different timespan to analyse how laccase production changed over time. In the first second of laccase production, we see polyethylene degradation beginning from around 0.6 sec:


Deg1.png


After 10 seconds, the first few molecules have been degraded. The constant diffusion of POPs into the cell is essential for the continuing degradation:

Deg2.png

At 100 seconds, the rate of degradation has risen to almost 1 PE molecule per second and we can assume that this will continue as long as the supply of POPs remains constant:

Deg3.png


From these results, we can see that our bacteria will degrade polyethylene linearly after an initial non-linear increase in degradation. However, these graphs do not indicate which factors, such as initial concentrations, parameter values and environmental conditions are affecting degradation. For this reason, we decided to run a sensitivity analysis on our model to test the robustness of the model.

Sensitivity analysis

We used SimBiology's sensitivity analysis tool to compute the sensitivity of the cell to variations in each model parameter and the initial amount of each DNA species. The aim was to find out how each of these impacts on the final concentrations of degraded PE and laccase.


The results show that the amount of PE degraded is dependent on the kinetics of the laccase reaction (see the paramters labelled R8.k17 and R8.k19 in the upper bars in the diagram below, which correspond to the Vm and Km values of laccase respectively). On the other hand, the amount of laccase degraded outside the cell is most dependent on the translation rate of laccase (see the parameter R6.k20 in the lower bars of the diagram). In addition, it also moderately affected by the rate of diffusion of laccase outside of the cell (see R7.p10) and therefore on the amount of laccase which ends up outside of the cell (Lexdegp).


The original aim in the development of the degradation model was to analyse the effect of POP, which acts as an environmental factor, on PE degradation. However, through the use of sensitivity analysis, it was deduced that there are more important parameter considerations (such as enzyme activity and translation rates) to take into account. It is reasonable to assume that POP levels are present in constant amounts, hence allowing for degradation of PE which varies with the translation rates and enzyme activity.


Degsens.jpg

Impact on experimental work

We initially believed that it was the amount of POPs present in the environment, rather than the specific activity of the enzyme used and the laccase translation rates, which would have the greatest effect on the amount of polyethylene degraded. Thus, although we had initially identified Rhodococcus ruber C208 laccase strain13 to use in the degradation of polyethylene, we now decided to use a laccase which was easier to obtain (E. coli).


Following the results of the sensitivity analysis, we realised that using a laccase with greater specific activity on PE would have a measurable impact on the amount of plastic our system can degrade. Hence, future modifications to our system will use R. ruber C208 laccase.

References

1. Goldstein M, Rosenberg M, Cheng L (2012) Increased oceanic microplastic debris enhances oviposition in an endemic pelagic insect, Biology Letters 10.1098

2. Andrady AL (2011) Microplastics in the marine environment. Marine Pollution Bulletin 62: 1596-1605

4. Kay J, Koivusalo M, Ma X, Wohland T, Grinstein S (2012) Phosphatidylserine Dynamics in Cellular Membranes. Molecular Biology of the Cell

5. Mato Y, Isobe T, Takada H, Kanehiro H, Ohtake C, Kaminuma T (2001) Plastic Resin Pellets as a Transport Medium for Toxic Chemicals in the Marine Environment. Environ. Sci. Technol. 35: 318-324

6. https://2011.igem.org/Team:Peking_S/project/wire/harvest

7. http://www.xbase.ac.uk/genome/azoarcus-sp-bh72/NC_008702/azo2419;nahR1/viewer

8. http://kirschner.med.harvard.edu/files/bionumbers/fundamentalBioNumbersHandout.pdf

9. Park H, Lim W, Shin H (2005) In vitro binding of purified NahR regulatory protein with promoter Psal. Biochimica et Biophysica Acta 1775: 247-255

10. Laccase size: http://partsregistry.org/Part:BBa_K729002

11. Kushner S (2002) mRNA Decay in Escherichia coli Comes of Age. J Bacteriol. 184: 4658-4665

12. Young K, Silver LL (1991) Leakage of periplasmic enzymes from envA1 strains of Escherichia coli. J Bacteriol. 173: 3609–3614

13. Santo M, Weitsman R, Sivan A (2012) The role of the copper-binding enzyme - laccase - in the biodegradation of polyethylene by the actinomycete Rhodococcus ruber. International Biodeterioration & Biodegradation 208: 1-7

14. 5. Ding Z, Peng L, Chen Y, Zhang L, Gu Z, Shi G, Zhang K (2012) Production and characterization of thermostable laccase from the mushroom, Ganoderma lucidum, using submerged fermentation. African Journal of Microbiology Research 6: 1147-1157. DOI: 10.5897/AJMR11.1257