Team:Paris Bettencourt/Delay

From 2012.igem.org

Revision as of 23:15, 26 September 2012 by Ewintermute (Talk | contribs)


iGEM Paris Bettencourt 2012

Delay system(s)

Aim : We want to provide a timespan for the cells to perform a function before triggering the DNA degradation mechanism

Experimental system: We used two different approaches to create this delay. The first one is based on a simple regulatory network and eventually allows the production of the restriction enzyme I-SceI. The second one allows a immunity protein free design. The toxin is under the control of a stationary phase promoter, and repressed at a post-translational level with a sRNA induced by arabinose. Once the cells enter stationary phase, if there is no arabinose in the medium, the toxin is activated.

Achievements :

  • Construction and characterization of the simple delay system
    • [http://partsregistry.org/Part:BBa_K914004 K914004] : PBAD-AraC-RBS-LacI ; characterization
  • Characterization of the sRNA repression system of Yokobayashi et al. :
  • Cloning and characterization of a stationary phase promoter

Contents

Overview

The delay system serves to suppress the function of the suicide device and preserve the integrity of the host genome while the organism does its intended job in the environment. We experimented with two designs for producing a programmed delay before the expression of the DNA-degrading suicide machinery.

The dilution delay system relies on the lab-specific expression of a transcriptional inhibitor. This inhibitor is induced by a specific compound found in the laboratory but not in the environment. When the cell enters the environment the inhibitor is gradually degraded or diluted by cell growth. Eventually, the repressor concentration falls below a critical threshold, releasing the suicide machinery.

The sRNA delay system makes use of a stationary-phase specific promoter. Under laboratory conditions, the suicide machinery is repressed by an inducible sRNA. In the environment, the suicide machinery is expressed as soon as the cells reach stationary phase.

Paris Bettencourt Delay overview.png

Simple delay system

Objectives

Our cells need time to work in the environment before we degrade their genomes. A programmed delay circuit faces the following challenges:

  • The delay must be programmable and long enough for our cells to perform a useful task.
  • Once begun, the delay should lead inevitably to death, and should be robust to environmental variation.
  • Prior to induction, our suicide machinery must be very tightly repressed.


Design

We chose to base our delay on a simple transcriptional network. The arabinose activated promoter, pBAD, drives the production of the LacI gene. LacI represses a restriction enzyme at the pLac promoter. In the absence or arabinose, the restriction enzyme is eventually expressed, triggering irreversible cell death.

For the purposes of characterization, we substituted GFP for the restriction enzyme at the end of our transcriptional cascade. The system we created is shown below :



ParisBet SimpleDelaydesign.jpg

Characterization

ParisBettencourt12SimpleDelay.png

sRNA delay system

Objectives

As an alternative trigger to the «collective suicide» presented in the overview of the project, we tried to build a system in which the toxin would be cloned without the Immunity protein, in order to avoid any possible resistance to the toxin due to a non-degraded plasmid. Such a design comes with several difficulties :

  • we need a very strong repression of the expression of the toxin. A leaky expression would harm the cells, and one of the risks is that mutants which do not produce the toxin arise and become selected.
  • we need to be able to have a control on the delay, in order for the cells to trigger the safety mechanism only once they have performed their function.
  • we need to be sure that the safety system will be triggered at one point. We prioritize the robustness of the delay over its timespan.

Design

We want to use a sRNA as a way to block the expression of the toxin. The concept of our design is described below. Similar systems have been shown to respond in a treshold-linear way [2]

SRNAparisbett.png

In order to achieve our goal, we started form the construct of Yokobayashi et al. [1] described below.

Odparisbett.png

Even though the cloning is still in process, we hope to build the following construct by the end of the competition.

Finaldesignparisbett.png

The transcription of the toxin is controlled twice : first, we chose a stationary phase promoter, yiaGp. It is known be recognized by the sigma-S subunit of the RNA polymerase, and not the exponential phase sigma-70 subunit. [3], [4].

We have shown that the yiaGp promoter is indeed activated during the stationary phase in our construct, even though the level of trancription is rather low (see experiments)

In order to achieve a complete lockdown of the toxin, we added a second repression mechanism, this time at the post transcriptional level. We used and modified the constructs of Yokobayashi et al. to allow a repression of the translation using sRNA [1]. We chose to use the sRNA 7.9, as it has been shown to bind the leader sequence of its target mRNA and not its coding sequence, and to allow a 20 fold repression of the protein’s expression. The transcription of the sRNA is under the control of the pBAD promoter. The coding sequence of colicin E2 is fused to the leader sequence (5’ UTR) of OmpF. The araC protein allows us to use this construct in cells deleted for the arabinose operon (TOP10). We hope that, using this type of cells, the delay will depend on the dilution of the arabinose in the medium as it is not metabolized. We will need to check the effect of extracellular glucose on the level of repression, as the CRP protein is known to repress the pBAD promoter.

Characterisation of the YiaGp promoter

Using the following construct, we characterized the stationary phase YiaGp promoter in TOP10 cells.

GFP-YiaGp.png

YiaGp is a late stationary phase promoter. It has been shown to be activated by 10 to 30 fold during to stationary phase, and is among the strongest promoters during this phase. Furthermore, its action has been reported to last for a longer time than most stationary phase promoters.

Experimental setup

Results

Present your results

Refined characterization of the Yokobayashi et al. sRNA repression plasmidic device

We double transformed TOP10 cells with the pKP33-GFPuv and pBAD-aOmpF-7.9 plasmids (see [1] for details, and click here for a schematic of the genetic system). We chose the 7.9 sRNA because it seemed to show a strong repression of the GFP expression, and bind to the RBS of the aOmpF leader sequence and not to the coding sequence.

The cells were grown in LB until stationary phase, then diluted 100-fold in LB. After adding various arabinose concentrations to the medium, we monitored the fluorescence of GFP (excitation : 395nm, emission : 509nm) using a TECAN 96-wells plate reader during 10 hours . We had 6 replicates for each concentration. The bar plot below shows the average normalized fluorescence at the final time point for each concentration tested.

Normalized Fluorescence of GFP with different concentrations of arabinose

References

1. Sharma, V., Yamamura, A., & Yokobayashi, Y. (2012). Engineering Artificial Small RNAs for Conditional Gene Silencing in Escherichia coli, 6-13. [http://pubs.acs.org/doi/abs/10.1021/sb200001q| Paper]

2. Levine, E., Zhang, Z., Kuhlman, T., & Hwa, T. (2007). Quantitative characteristics of gene regulation by small RNA. PLoS biology, 5(9), e229. doi:10.1371/journal.pbio.0050229 [http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.0050229| Paper]

3. Sharma, U. K., & Chatterji, D. (2010). Transcriptional switching in Escherichia coli during stress and starvation by modulation of sigma activity. FEMS microbiology reviews, 34(5), 646-57. doi:10.1111/j.1574-6976.2010.00223.x[http://jb.asm.org/content/186/21/7112.long| Paper]

4. Shimada, T., Makinoshima, H., Ogawa, Y., Miki, T., Maeda, M., & Ishihama, A. (2004). Classification and Strength Measurement of Stationary-Phase Promoters by Use of a Newly Developed Promoter Cloning Vector, 186(21), 7112-7122. doi:10.1128/JB.186.21.7112 [http://onlinelibrary.wiley.com/doi/10.1111/j.1574-6976.2010.00223.x/abstract;jsessionid=8C98B1B383242B9DFF45429802F48428.d02t04| Paper]

Copyright (c) 2012 igem.org. All rights reserved. Design by FCT.