Team:NRP-UEA-Norwich/Week3

From 2012.igem.org

(Difference between revisions)
(Labs)
(Labs)
Line 71: Line 71:
After the previous days' investigation into the various reporter proteins for the project we decided to look at fluorescent proteins with vastly differing peaks. Ultimately we decided to investigate Red Fluorescence Protein (RFP) and Blue Fluorescence Protein (BFP) as there was very little overlap in their peaks, and it was concluded that we should characterise some biobricks that we already had to assess the fluorescent protein levels and their usefulness in our project. After looking at our kit plates we decided on using:
After the previous days' investigation into the various reporter proteins for the project we decided to look at fluorescent proteins with vastly differing peaks. Ultimately we decided to investigate Red Fluorescence Protein (RFP) and Blue Fluorescence Protein (BFP) as there was very little overlap in their peaks, and it was concluded that we should characterise some biobricks that we already had to assess the fluorescent protein levels and their usefulness in our project. After looking at our kit plates we decided on using:
 +
. [http://partsregistry.org/Part:BBa_R0080 BBa_R0080] - A promoter that should activate transcription in the presence of arabinose, in order to allow simple and easy activation of the fluorescence in transformed cells.
. [http://partsregistry.org/Part:BBa_R0080 BBa_R0080] - A promoter that should activate transcription in the presence of arabinose, in order to allow simple and easy activation of the fluorescence in transformed cells.
Line 77: Line 78:
. [http://partsregistry.org/Part:BBa_K081014 BBa_K081014] - A reporter expression RFP. This biobrick also contains the RBS and terminators meaning we can simply add the promoter of choice to complete the system.
. [http://partsregistry.org/Part:BBa_K081014 BBa_K081014] - A reporter expression RFP. This biobrick also contains the RBS and terminators meaning we can simply add the promoter of choice to complete the system.
 +
Russell and Rachel transformed ''E. coli'' with the three biobricks of choice using the standard protocol described in previous experiments and plated onto agar plates containing 5µl ampicillin due to the plasmids for each biobrick including ampicillin resistance. The bacteria was left to grow overnight in the 37 °C incubator and placed in the fridge the next day following growth.
Russell and Rachel transformed ''E. coli'' with the three biobricks of choice using the standard protocol described in previous experiments and plated onto agar plates containing 5µl ampicillin due to the plasmids for each biobrick including ampicillin resistance. The bacteria was left to grow overnight in the 37 °C incubator and placed in the fridge the next day following growth.
 +
 +
The transformation protocol can be found [http://2012.igem.org/Team:NRP-UEA-Norwich/Protocol#Transformation Here]

Revision as of 10:38, 8 August 2012

Header1NewGreen.png

NRP UEA iGEM 2012

 

Welcome to the NRP UEA iGEM 2012 Wiki Lab Book

Please choose the relevant link to access our diary of that week!

Week Zero | Week One | Week Two | Week Three | Week Four | Week Five | Week Six | Week Seven | Week Eight | Week Nine | Week Ten | Week Eleven | Lab Protocols | Experiments

Contents

Week 3

Over the weekend the group met up to discuss the two potential projects we could go forward with using our synthesised gene and the Biobrick it will ultimately produced. We developed two main themes; one was a multi-sensor system sensing oxygen-containing physiologically-relevant molecules and reporting on the levels of each molecule; the other was a comparator circuit sensing levels of molecular species and using novel gene expression to express reporters for specific molecules within the environment to quantitatively measure them. We decided on the latter as we felt it would have the highest scientific impact, a diagram of the gene system for one of the sensors is given below.

NRPDiagram1.png

The concept behind the project involves the mRNA control region of one sensor binding to the mRNA control region of a second sensor and thus for one sensor to 'switch off' the other to a certain degree, and for the overhang to be used to measure levels of a substrate molecule. For example in our nitric oxide-sensing project a sensor for nitric oxide and nitrites (sensor 1) may be used in conjunction with a sensor for only nitrites (sensor 2); the control region of mRNA produced from sensor 2 would switch off sensor 1 per the levels of nitrite in the environment, and therefore all expression of sensor 1 would be directly related to nitric oxide levels in the atmosphere.

Day 1

Meetings

Amy (our artist) came to visit us today in order to discuss our video. She, Joy and Rachel began to storyboard the film and work out how to incorporate the decision made over the weekend into the video. They came up with some fantastic ideas and the whole team sat down to discuss them before Amy left to organise making props. Joy also got in touch with the UEA Drama School in order to see whether we could hire a studio in order to film our video.

Labs

From the transformation of the two promoters carried out on Friday, we inoculated some colonies into culture. This will be used later for characterisation of the promoter. From the two plates, we noticed that one plate had bigger colonies and one had very small colonies. The larger colonies were from the agar plate inoculated with transformed "E.coli" with promoter 1.

To characterise the promoters and other Bio-Bricks we may be interested in, an input of NO will be needed. Our solution to this is to use a nitrate salt like potassium nitrate. A stock solution (1M) was made up today by Lukas. This was taken to be autoclaved.

Day 2

Labs

Joy prepared the pSB1C3 backbone by restriction. This gave them sticky ends which allows us to ligate DNA with complimentary ends into them. Lukas and Joy also prepared the synthesised hybrid promoters of both orientations by isolating the plasmids.

Day 3

Research

After our hunt for the fluorometers and speaking to Dr. Yeoman the previous day we decided that we needed to find whether we could use fluorescent proteins today in order to go on to design the DNA for the control region and reporter/enzyme. After a social media call-out for fluorometers in our faculty we were pointed in the direction of Dr. Tom Clarke who very kindly offered us the use of his fluorometer, as well as training on it and potentially even the use of a fluorescence microscope. He also gave us advice on the project and suggested that pigments and the use of a spectrophotometer would perhaps give the better quantitative results and informed us that fluorescence may be particularly labour-intensive and time consuming. We decided to spend the rest of the day researching other ways of reporting on the substrate levels in the environment.


We began by investigating various pigments and looked at projects such as E. chromi to find biobricks of the pigments we would require. One problem we fell into was the absorbance of the pigments overlapping, which would ultimately cause our results to be inaccurate if they were produced in an environment. We then decided to look at proteins with unique absorbancies as our reporters, as well as enzymes that would produce colourful products. Our main problems involved using proteins that were not already incorporated into biobricks, using proteins whose absorbance and emission spectra did not overlap, and using proteins that would not interfere with the ribosome binding site and

Labs

Hybrid promoter 1 miniprep involving isolation of plasmid and running on a gel. The desired fragment was excised from the gel.

To characterise the PyeaR bio-brick, a culture mixture was prepared containing potassium nitrate, PyeaR-GFP composite, chlorophenicol and LB media. This was left overnight to grow. The isolated hybrid promoter 1 was digested and an agarose gel was prepared to separate the fragments the following morning.


Day 4

Research

. Going down all avenues to search for which reporter would be the best for our project, including fluorescence, absorbing proteins, pigments and enzymes with coloured produce.

. Decided to test fluorescent biobricks we already had to determine how easy they would be to use.

. Began to look at how to construct the mRNA for our synthetic gene.

Labs

The GFP Gradient

MB purification from gel-non DNA (bioline faulty)

Using the nitrate cultures made the previous day, Russell, spun down a proportion of the cells and viewed them under UV light. He found a graduated intensity of green fluorescence. Rebecca prepared chlorophenicol plates at a concentration of 25µg/ml and also made a stock solution of ampicillin. Lukas and Joy ran the gel and found that there was no DNA. We suspect that during the process of isolation, the DNA was lost and the remaining was insufficient to show up on the gel. In the afternoon, Lukas purified the hybrid promoter 2 using gel electrophoresis and DNA was found. This was digested and again Joy prepared an agarose gel for following morning use.

Day 5

Research

. Pascoe and Khadija looked at the mRNA.

Labs

Lukas and Joy ran a gel of the double digest of the bacterial and mammalian hybrid promoter which was used to separate the fragments. We found DNA and hence the 250bp fragment was cut from the gel and purified. The ligation between the promoter (250bp fragment) and iGEM vector (pSB1C3) on Monday in preparation, the linearised backbone was digested. A different method of creating the bio-brick was attempted. As part of this method, the unpurified double digest sample was ligated into the pSB1C3 backbone. Three expected plasmid constructs might be observed and the desired one selected for next week. Rebecca made extra LB media which was poured into 5ml sample bottles and LB plates containing ampicillin at a concentration of 100 µg/ml. Lukas and Rebecca also isolated the plasmids containing the mammalian and bacterial hybrid promoters in both orientations. This was so that more DNA was ready to be used when needed.


After the previous days' investigation into the various reporter proteins for the project we decided to look at fluorescent proteins with vastly differing peaks. Ultimately we decided to investigate Red Fluorescence Protein (RFP) and Blue Fluorescence Protein (BFP) as there was very little overlap in their peaks, and it was concluded that we should characterise some biobricks that we already had to assess the fluorescent protein levels and their usefulness in our project. After looking at our kit plates we decided on using:


. BBa_R0080 - A promoter that should activate transcription in the presence of arabinose, in order to allow simple and easy activation of the fluorescence in transformed cells.

. BBa_E0420 - A reporter expressing enhanced Cyan Fluorescence Protein (eCFP), a fluorescent protein with a similar peak to BFP that shouldn't overlap with RFP too much. This biobrick also contains the RBS and terminators meaning we can simply add the promoter of choice to complete the system.

. BBa_K081014 - A reporter expression RFP. This biobrick also contains the RBS and terminators meaning we can simply add the promoter of choice to complete the system.


Russell and Rachel transformed E. coli with the three biobricks of choice using the standard protocol described in previous experiments and plated onto agar plates containing 5µl ampicillin due to the plasmids for each biobrick including ampicillin resistance. The bacteria was left to grow overnight in the 37 °C incubator and placed in the fridge the next day following growth.

The transformation protocol can be found Here