Team:MIT/NOTGate

From 2012.igem.org

Revision as of 23:48, 26 October 2012 by Felixsun (Talk | contribs)

iGEM 2012

Overview

  • Results Overview

Circuit Production

  • Short RNA Production
  • Circuit Production: Hammerhead Ribozymes

NOT Gate

  • Design
  • Modeling
  • In Vitro Results

Sensing

  • Design
  • Modeling
  • In Vitro Results

Actuation

  • TuD and Decoy RNAs
  • Modulating Hammerheads

The Key Reaction

  • Design
  • Nucleic Acid Delivery
  • Experimental Strand Displacement

Our BioBricks

  • Favorites
  • All BioBricks

Attributions

  • Attributions

Our NOT Gate Design, Simulations and Optimization

Design

The NOT gate (signal inverter) design we eventually used comprises of multiple double- and single-stranded species. The most important of these are NOT gate (A), output (B) and buffer (C) complexes.
There are two important cases to consider: first the case where there is no input present (in digital terms, the input is 0), and second the case where there is a saturating level of input (digitally represented as a 1). We aim to convert the '0' input into a '1' output and the '1' into a '0' - the basic operation of a NOT gate. Refer to the diagram below throughout the explanation.

Case 1: No input present -> high signal
Here, the output strand (B) reversibly reacts with the NOT gate (A). The reaction is reversible because the output strand only displaces the green section on the NOT gate, but not further, meaning that the reaction could go back as well. This reversible reaction allows the output strand to react to a downstream buffer (C) and amplifier (D) to produce a high signal (a new active nucleic acid strand is released).

Case 2: Input present -> low signal
Here, the input strand and output strand both react with the NOT gate. The input strand displaces up to the pink region and the output strand displaces up to the green region. This is irreversible, as once strand displacement happens from both sides, the complex separates into two double-stranded species. There is no toehold to initiate the reverse reaction, so the output strand is "stuck". The output therefore cannot be buffered or amplified to produce a signal: no new active nucleic acid strand is released.

Our NOT Gate Design
Diagram of our NOT gate. See the paragraph above for a more detailed description.

Optimization

In Vitro Results for Our NOT Gate

To test the functionality of the NOT gate as expressed by its transfer function (relating the input levels to output signal strengths) we performed in vitro studies with DNA as the nucleic acid for strand displacement. The output signal strand was fed to a reporter complex. This reporter, when triggered by a signal, will fluoresce in the red channel. Our experiments involved measuring these fluorescence levels for various amounts of initial input levels.