Team:Freiburg/Notebook/Methoden

From 2012.igem.org

(Difference between revisions)
(Methods)
(Methods)
Line 3: Line 3:
= Methods =
= Methods =
----
----
 +
<br>
<div align="justify">In this section we want to give you a chance to take a look at our protocols. From simple Agarose Gel over Colony PCR to transfection and SEAP measurment. All of our protocols are extensivly tested, sometimes a couple hundred times, so we are confident that they are perfectly working. Feel free to use the protocols for your own labwork and don't hesitate to contact us if you have any questions or problems regarding the protocols.
<div align="justify">In this section we want to give you a chance to take a look at our protocols. From simple Agarose Gel over Colony PCR to transfection and SEAP measurment. All of our protocols are extensivly tested, sometimes a couple hundred times, so we are confident that they are perfectly working. Feel free to use the protocols for your own labwork and don't hesitate to contact us if you have any questions or problems regarding the protocols.
Line 9: Line 10:
== PCR Methods ==
== PCR Methods ==
----
----
 +
<br>
<html>
<html>
<div style=text-indent:0px>
<div style=text-indent:0px>

Revision as of 16:40, 26 September 2012




Methods



In this section we want to give you a chance to take a look at our protocols. From simple Agarose Gel over Colony PCR to transfection and SEAP measurment. All of our protocols are extensivly tested, sometimes a couple hundred times, so we are confident that they are perfectly working. Feel free to use the protocols for your own labwork and don't hesitate to contact us if you have any questions or problems regarding the protocols.


PCR Methods



First Extension PCR.

In this protocol you can find the ingeredients and the theromcycler program for a working extension PCR. If you are thinking about doing a own extension PCR, you need to set the reaction conditions according to your experiment design. This means to adjust annealing temperature for your primers as well as the extension time for the lenght of your template. You can find instructions inside the manual of your polyerase on how to do this ajustments.
As you can see has our PCR program two-steps, the first step is two extend the template and the second to amplificate the now longer template. The two steps are neccesary due to the different annealing conditions for extension and amplification. During extensions only a short part of the primer binds to the template which needs a lower temperature, at the amplification step the complete primer binds so you need a higher temperature.


Second Extension PCR.

This protocol is essentially the same as the first extension PCR its just here for completeness


Colony PCR.

Colony PCR is one of the most standard methods in molecular biology and you need it at almost every project. Essentally you pick a colony after transfection put a bit of it into a PCR tube and use it as template for a PCR. The PCR amplifies the part between the primers and you should be able to make it visible on an agarose gel. Togeather with a gel ladder you can now tell the lenght of the amplificated part and with this make suggestions if your transfection earlier worked out.


Purification, Digest and Ligation


Purification, Digest, Ligation and other

In this protocol we combined all of the small processes we used during our project, for most of them like PCR purification or plasmid prepartaion we used commercial kits. These kits come with easy step by step explanations and dont need much practice so even people that cannot be in the lab every day can do them without worrying about destroying precious samples.


Transformation and transfection


Transformation of E.coli

Transformation is a thing in the lab that everyone has a other little trick to do it best and everybody tells you that their way is the right way because they do it since forever. As we can tell you, our protocol is perfectly working, its effective and gives you great transformation efficiency if you use it like it is written.


Transfection and SEAP measurement.

Transfection of HEK cells is almost as easy as tranfroming Ecoli, with this protocol we got great transfection efficency even when we used multiple plasmids. Make sure you thought about your experiment design we would advise to always do three replicates and implement multiple control experiments. This is especially importend when you du co transfections of multiple plasmids.