Team:Cambridge/Project/DesignProcess

From 2012.igem.org

(Difference between revisions)
(Luciferase and instrumentation)
(Design Process)
Line 2: Line 2:
=='''Design Process'''==
=='''Design Process'''==
-
Every good design process must have a clear aim. Ours was to take a step towards realising the full potential of already heavily investigated parts, in this case biosensors, by developing a prototype kit which could be used in real-world applications effectively and practically. In  other words, engineering user-friendly products with biobricks at the foundation, aimed at the end user. Our team realised the potential of the plethora of characterised biobricks found in the registry, not only for the distant future but for today by providing humanity with new, useful, biological products.
+
Every good design process must have a clear aim. Ours was to take a step towards realising the full potential of a group of well characterised parts, the biosensors available within the registry, by developing a prototype kit which could be used effectively and practically in real-world applications. In  other words, we aimed to engineer a user-friendly product, centred around biobricks, and aimed at the end user. Our team has realised this potential and have developed a kit which has real world uses now, as well as potential applications in the future.
==Market Research==
==Market Research==

Revision as of 21:56, 24 September 2012

Previous iGEM teams have charaterised an impressive array of inducible promoters, along with other elements of biosensing circuitry... Read More






Contents

Design Process

Every good design process must have a clear aim. Ours was to take a step towards realising the full potential of a group of well characterised parts, the biosensors available within the registry, by developing a prototype kit which could be used effectively and practically in real-world applications. In other words, we aimed to engineer a user-friendly product, centred around biobricks, and aimed at the end user. Our team has realised this potential and have developed a kit which has real world uses now, as well as potential applications in the future.

Market Research

Having decided that the primary aim of our project was the design of a practical useful product, the first thing we needed was to find its potential use as well as a possible market. The market should fulfill at least three requirements:

  • Face a real problem which could be solved by our product.
  • Have the financial capacity to obtain/create our product.
  • Be currently in the state where access to similar equipment is limited, and therefore the impact of our solution would be maximised

We aimed to tackle issues concerning the standard of living of people, in particular.

More details about our market research can be found in our Human Practices page

Objectives

As stated in our project aims and justified by the market reasearch above we wanted to develop a standard for biosensors that is reliable, affordable, portable, open-source, accessible and relevant. These different attributions require a little more discussion before a formal Design process can begin. The formal design goals for our project are the development of:

  • an output that is reliable, reproducible and most importantly quantitative.
  • robust, standard platform for biosensing inputs.
  • a system for storage and distribution of biosensors for straightforward use in multiple applications.
  • a system that is rooted in real world applications that can bring about a positive change in the world

Systems

Inputs

It's common sense that without a reliable input system, output systems, however robust, cannot be relied upon to give meaningful results. It is therefore important that any input used for a biosensor is well characterised (with response curves) under different conditions. However, for an effective revolution in biosensing we would also like a standard platform for sensing a multitude of analytes. This would allow for better characterisation and all additional information about function under different conditions to be acquired with one less parameter that needs to be changed. We would also like the response curves to be relatively linear across a wide range such that different toxicity thresholds are detectable using the same system. We would also like a system that could be designed "from scratch" in future such that there is no need for an existing sensing mechanism in an organism to be found before implementation in a biosensor can take place. The input must therefore have the following attributes:

  • A decoupling between the sensing mechanism and its interface with the output system.
  • Highly specific analyte discrimination.
  • An output regulation system that is highly proportional to the concentration of analyte present.
  • The ability to be designed for specific analytes in a methodical way that could be assisted with software tools.

Processing

As all biosensors currently in the registry only use a single output to relay information about the concentration of an analyte, there is great potential for cell growth phase, density, culture inhomogeneity and productivity to vary between assays and this often leads to poorly reproducible and unreliable results. We therefore desire some processing to be performed (without specifying where in the whole system yet) that factors these variables in and allows for a much more accurate readout. With accuracy also comes the ability to provide numerical readouts provided that the output system is geared up for this purpose. We also desire an ability to tune the circuit based on what range of input concentrations we are looking at such that high accuracy can be achieved. The processing system must therefore have the following attributes:

  • The ability to compensate for culture variability between assays
  • The ability to make calculations over a wide range of concentrations with similar, high levels of precision across this range.


Outputs

In order for commercial success of a project that fits our goals it is absolutely vital that a quantitative, numerical, robust and flexible output exists to relay information to a user that is an accurate representation of the processed input. Outputs fitting this description are commonplace in nearly all other scientific fields where the ability to collect and process data has not only eased interpretation of experiments but also allowed a much faster development of understanding and ultimately technology in those fields. in biology, however, due to the complexity of the systems under scrutiny, it has been difficult to design such outputs and where methods have been found they are normally very expensive. We therefore desire an output with the following characteristics:

  • Provides reproducible, quantitative data under many environmental conditions with small error margins.
  • Displays data to a user in an intuitive manner that is easy to interpret.
  • Be flexible to support use in multiple environments
  • Does not require specific environmental domains to leave an undistorted post-processing signal.
  • Easy to interface with data processing tools
  • The ability to provide support multiple readouts from different assays.
  • Cheap

Storage & Distribution

If our project is to have any meaning or impact on sensing applications, suitable plans and design considerations must be in place such that our biosensing platform can be packaged and distributed easily and cheaply, whether it be for high tech testing purposes or field applications in places lacking appropriate infrastructure for e.g. cooling, large or electrical currents. This relates particularly well to our human practices where we learnt that a major problem to tackle in developing countries is a biolab infrastructure for using biosensing equipment. The design criteria for this aspect of the product is thus as follows:

  • Deliverable worldwide
  • Storable for the long term without appreciable loss of quality
  • Both of the above without requirement for high powered or high tech infrastructure

Investigation and solution

We will now try to demonstrate how the developments we have made during our project have tackled the aims we set out to fulfil - within the constraints of a single summer long project run by undergraduates of course!

RiboSense

Ratiometrica

Luciferase and instrumentation

Having come across the OFP-luciferase fusion, the emission spectra of which appeared sufficiently distinct from that of the normal bacterial luciferase (a fairly distinctive blue), it became clear to the team that this would be a great opportunity for making our own instrumentation, both hardware and software. The difference could be identified by simple photo-resistors (70kΩ/200kΩ) and coloured theatrical filter gels. The emission spectra of the OFP/luciferase fusion is shown below:

The expected output spectrum of our MOrange/luciferase fusion - Dachuan Ke and Shiao-Chun Tu (2011) DOI:10.1111/j.1751-1097.2011.01001.x

The first experiment to be done was the measurement of the absorbance (actually the inverse of it) of different theatrical filter gels. The target was to differentiate the 560 nm peak to the 490 nm peak. This was accomplished, as it can be seen below, by one blue and one orange filter gel.

The spectral properties of our filters. The different colours represent the different colours of filter.

The second experiment to be done was the testing of the sensor with luciferase-producing E.Coli with lux genes, taken from the 2010 Cambridge team. The experiment was conducted by moving the tube containing these bacteria towards and away from our sensor (shown on the right). It should be noted that when this experiment took place, the blue and orange filters were placed in reverse. Therefore, light which consisted primarily of blue frequencies caused a rise instead of drop. For all the other experiments the blue and orange filters were placed in the right order. The results were again very encouraging, showing that the sensor is certainly reacting to even that minute amount of light.

Sensor made from LDRs and filter gels
Sensor data against time


Following on that experiment, but now with the blue and orange filters in the right order, the sensitivity of the sensor was tested using a dilution series of luciferase-producing bacteria. 20ml Cultures were grown overnight from single colonies. The cultures were induced with 40ul of 1.5M arabinose (for a final concentration of 3mM). Cultures were left for 2 1/2 hours for full induction. Subsequently, a culture was pelleted and resuspended in 4ml LB. Doubling dilutions of volume 2ml were made from this concentrate, down to 1/8th concentration. 1ml of each 2ml dilution was analysed in each cuvette, which was placed in our manually-made cuvette holder. The result was very good. An almost linear relationship was obtained when data were normalised with the sensor value taken in the dark room without a cuvette holder used (1-(sensor value/sensor value in absolute dark)), presenting the sensitivity of the sensor to different intensities of light. This behaviour was expected due to the changing offset affecting the luciferase spectrum curve at different light intensities. The offset, using our data was calculated to be about 0.2V for each dilution. A second graph is shown which takes into account this offset (and removes it), thus showing the presence of blue frequencies. The result was very good as the presence of blue frequencies throughout the dilution series is and is detected to be approximately constant.

Normalised sensor data using a dilution series of bioluminescent E.Coli- Concentrations on the x-axis are relative therefore an OD 600 value was also taken
Normalised percentage of blue frequencies using the same as above dilution series of E.Coli

Once the sensor was built and tested for sensitivity, we needed to test that our circuitry correctly identifies different frequencies (colours) of light. As can be seen below, measurements taken from orange and blue light yield values respectively above and below those from white light (our reference point). The data was taken using a constant intensity of light for each case (V.High and V.Low brightness). This was done with the aid of an Android phone and a specialised software application, called Color Flashlight, downloaded from the official Market.

As expected from the potential-divider design of our circuitry, orange and red frequencies caused the resistance of the LDR with the orange filter to decrease, leading to a higher voltage accross the LDR with the blue filter. The opposite effect was observed with blue light. The reason that the white reference point is a bit lower than 2.5V (the expected value for a non-biased circuitry with a 5V source), is because we use resistors of total net resistance 1.67 kΩ before the blue LDR. This was done to bias the circuitry towards blue (i.e. decreasing the starting value) and thus making orange light having a larger impact when present. This was used in an attempt to compensate for the fact that the peak at 560nm (Orange) in MOrange/luciferase fusion spectrum is lower than the one at 490 nm (Blue).

Sensor data for different colours at different intensities

As the major part of the instrumentation, the bio-electronic interface, was made and tested, now the peripheral parts had also to be implemented. This includes the mechanical chassis of the prototype, the electronics/mechatronics (sensory and motory) components and of course the software. A full analysis of the finished hardware/software can be seen in our Intstrumentation page. Below, the videos showing our instrumentation in action can be seen.

Further improvements on instrumentation design

Although we thought that the ideas shown below could be very useful, due to restrains of time and money, our instrumentation is simpler, yet it shows the potential of cheap instrumentation in the biological world.

  • Cuvette holders could be replaced with well-designed cuvettes with bio-containment mechanisms. These cuvettes could have a double layer and a lid at the top. In the cavity between the layers an antibiotic would be present. By applying a small amount of force on the sides and with the lid on, the second layer would break, thus releasing the antibiotic inside the cuvette. Then the cuvette can then be disposed.
  • Microfluidic technology could be used to deliver the testing sample to the cuvettes. In that way spillage would be minimised.
  • For increased biosecurity and where cost is not an issue, the device can have a sensor dedicated to each cuvette. In that way, parallel readings could be taken in a non-rotary device.
  • Hall-effect sensors or barcode readings could be used for better accuracy for identifying where the sensor is. Barcodes could also be useful for identifying what chemical is searched for by the sample by each biosensor.

Sporage and Distribution

Costing

One of the most important motives for our project was a low-cost solution.

Instrumentation Cost:

  • Arduino Experimentation Kit

$25.00

  • Light - dependent resistors 70kΩ/200kΩ

$2.00

  • Colored Gel Filters

$2.00

  • Materials for mechanical chassis

$6.00

Total $35.00

Optional: Bluesmirf Gold Bluetooth Modem $50.00

Conclusions