Team:Calgary/Project/OSCAR/Bioreactor

From 2012.igem.org

(Difference between revisions)
Line 7: Line 7:
<img src="https://static.igem.org/mediawiki/2012/9/9d/UCalgary2012_OSCAR_Bioreactor_Low-Res.png" style="float:right; max-width: 200px; padding: 10px;"></img>
<img src="https://static.igem.org/mediawiki/2012/9/9d/UCalgary2012_OSCAR_Bioreactor_Low-Res.png" style="float:right; max-width: 200px; padding: 10px;"></img>
<h2>Introduction</h2>
<h2>Introduction</h2>
-
<p>A major goal of our project was to use genetically engineered bacteria to convert toxic organic compounds into recoverable hydrocarbons.  To accomplish this goal our team needed to create a contained bioreactor system to carry out these conversions. Because of the large scale of the oil sands tailings ponds, we needed to design our vessel for large scale application. Similar sized bioreactors can be found in waste-water treatment plants, tissue engineering, and beer fermentation. All these types of systems need highly controlled heat and oxygen exchange,suitable pH and agitation control.  For our system we had the additional design considerations of determining ideal flow rates, growth medium, and optimal conditions for bacterial growth and biochemical conversion. </p>
+
<p>A major goal of our project is to use genetically engineered bacteria to convert toxic organic compounds into recoverable hydrocarbons.  To accomplish this goal our team needed to design a contained bioreactor system to house these conversions. Because of the enormous scale of the oil sands tailings ponds and refineries, we needed to design our vessel considering these applications. We drew inspiration from literature and what is known of similar sized bioreactors used for other applications (waste-water treatment plants, tissue engineering, and beer fermentation) to decide what factors to consider in the design of OSCAR's home. </p>
-
       <p>In addition to developing a design for the bioreactor taking these factors into account, we were also tasked with finding a way of extracting the hydrocarbon products from the bioreactor. The hydrophobicity and light density of the hydrocarbons should cause them to fraction into the top layer of the solution.  Several methods for separation were considered to maintain layer separation into their respective components such as centrifugation or filtration.</p>  
+
       <p>We were also tasked with finding an optimal method for extracting the hydrocarbon products from the bioreactor. The hydrophobicity and light density of the hydrocarbons should cause them to fraction into the top layer of the solution.  Several methods for separation were considered to maintain layer separation into their respective components such as centrifugation or filtration.</p>  
-
<p>The bacteria we are working with in our system are nonpathogenic, lab strains of <i>Escherichia coli</i> transformed with genes that are found in naturally occurring tailings pond organisms. Although they are considered harmless, it is preferable to prevent their escape into the environment.  We have implemented containment controls into the design and biological controls in the form of a <a href=https://2012.igem.org/Team:Calgary/Project/HumanPractices/Killswitch>genetic kill switch</a>
+
<p>In light of the issue of containment with genetically modified organisms, we have designed our system with several levels of controls that range from biological to physical containment measures to keep our organisms contained. The bacteria we are working with in our system are nonpathogenic, lab strains of <i>Escherichia coli</i> transformed with genes that are found in naturally occurring tailings pond organisms. Although considered harmless, it is preferable to prevent the OSCAR bacteria from escaping into the environment.  We have implemented containment controls into the physical design and biological controls in the form of a <a href=https://2012.igem.org/Team:Calgary/Project/HumanPractices/Killswitch>genetic kill switch</a>
-
  mechanism. In light of the issue of containment with genetically modified organisms, we have designed our system with several levels of controls that range from biological to physical containment measures to keep our organisms contained. </p>
+
  mechanism. </p>
<h2>Research</h2>
<h2>Research</h2>

Revision as of 23:31, 3 October 2012

link title

Hello! iGEM Calgary's wiki functions best with Javascript enabled, especially for mobile devices. We recommend that you enable Javascript on your device for the best wiki-viewing experience. Thanks!

Bioreactor: The House of OSCAR

Introduction

A major goal of our project is to use genetically engineered bacteria to convert toxic organic compounds into recoverable hydrocarbons. To accomplish this goal our team needed to design a contained bioreactor system to house these conversions. Because of the enormous scale of the oil sands tailings ponds and refineries, we needed to design our vessel considering these applications. We drew inspiration from literature and what is known of similar sized bioreactors used for other applications (waste-water treatment plants, tissue engineering, and beer fermentation) to decide what factors to consider in the design of OSCAR's home.

We were also tasked with finding an optimal method for extracting the hydrocarbon products from the bioreactor. The hydrophobicity and light density of the hydrocarbons should cause them to fraction into the top layer of the solution. Several methods for separation were considered to maintain layer separation into their respective components such as centrifugation or filtration.

In light of the issue of containment with genetically modified organisms, we have designed our system with several levels of controls that range from biological to physical containment measures to keep our organisms contained. The bacteria we are working with in our system are nonpathogenic, lab strains of Escherichia coli transformed with genes that are found in naturally occurring tailings pond organisms. Although considered harmless, it is preferable to prevent the OSCAR bacteria from escaping into the environment. We have implemented containment controls into the physical design and biological controls in the form of a genetic kill switch mechanism.

Research

Figure 1: Visiting Calgary's Bonneybrook wastewater treatment plant, overlooking one of the plants bioreactors.

Before diving into a making bioreactor, we first had to research current solutions in the field. To help us with this phase, we read research papers on bioreactors, toured a wastewater treatment plant, interviewed graduate students in the field, and had weekly meetings with the supervisors and biologists on our team. The bioreactors at the wastewater treatment plant were contained in open systems since they used natural microbes. The reactor also contained an air sparger to oxygenate the solution and spun at an extraordinarily slow rate. This was one of the many bioreactor processes we looked into. Below are pictures from our trip!

Our Bioreactor Evolution

Throughout the summer we worked on creating a prototype of the bioreactor. Our ideal process would be a fed-batch system, where the reactors would be continually fed with more bacterial nutrients and fresh tailings. The fresh tailing would be added when the toxin concentration within the bioreactor is lower, thus allowing the bacteria to continually convert toxins to hydrocarbons. Additionally, the process would have to occur within an enclosed system to ensure its sterility.

Figure 2: From computer to prototype, how we made our bioreactor. a) Our system began with a model built using Google Sketch Up. It had two chambers and a tube acting as a siphon to pull off hydrocarbons. b/c) The first prototype took its shape from the materials we were able to find in the lab (including the recycling bin). This system was meant to show that the bioreactor could agitate a solution with the turbine. d) This prototype is our first manufactured design we put together. It needs a power source to turn on the computer fan motor which runs the turbine. It also includes an air sparger system to allow our system to be oxygenated. Apart from the plastic gears, it is fully autoclavable. e/f) Our final prototype, which includes the belt skimmer in an enclosed system. It is able to skim off the top oil layer in a solution of water and canola oil into a small falcon tube.

The Prototype

We determined a few basic concepts that needed to be included in the prototype. For one, we needed to make our bioreactor a closed system in order to keep our solution sterile. This is necessary to allow only our bacteria (E. coli with an ampicillin resistance marker) to grow. Employing a closed system bioreactor is also necessary as a physical containment measure to confine our organisms to our system.

Next, we needed to use a batch system for our system to work at lab scale (for competition data). This means that we are allowing the entire process to occur, and then removing all of our solution when our reactions have come to completion. This batch will include an appropriate growth medium to optimize our organisms growth, as well as a compound. This opposes a continuous stir method, where product is removed at the same rate that biomass and nutrients are added. A continuous method would be more appropriate at an industrial scale (1000+ L tanks), where the bacteria will have enough time to convert toxins in such large tanks.

Furthermore, we had to find a way to remove the hydrocarbons once they were produced. We decided to use a belt skimmer, similar to those used to help clean up oil spills. This method is useful because it allows us to run the belt to pick up hydrocarbons without having to remove the entire solution of the batch. This way the bacterial culture already present in the tank can be maintained in active culture to continuously produce more hydrocarbons. To ensure sterility the belt skimmer will have a UV light attached across the belt to ensure sterilization of any bacteria picked up by the skimmer before the hydrocarbons are skimmed from the bioreactor chamber.

Finally to ensure optimal bacterial growth and production of our desired product, we included both a sparger and a turbine in the bioreactor design. The purpose of the turbine was to mix the solution preventing bacterial cells and other heavier materials from settling at the bottom of the vessel. Continuous mixing of the solution would also ensure even nutrient and reactant distribution in the tank. The sparger oxygenated the solution, aeration which is necessary for our aerobic bacteria to thrive. When assembled together the turbine would be located above the sparger thus breaking each bubble from the sparger into smaller ones. In a thicker solution such as tailings, both the air sparger and turbine will agitate the solution thus mixing it and prevent heavier materials from settling at the bottom of the chamber.

Once we had these designs in place, we were able to start building models and presentation material. One of our goals was to have a computer animation of our design in motion. We were able to meet this goal by using programs called Maya and RealFlow. Maya is a complex and extremely versatile computer animation program used for many animated movies, including James Cameron’s “Avatar”. RealFlow is a particle-generating program, used primarily for creating fluid flow and fluid effects. Combining both of these programs, we created a seventeen second long video showing the basic idea of how our bioreactor will work. In addition to this, we made a functioning model of a tank with our turbine, belt skimmer, and sparger included inside. Our model is also a closed system, which will be brought to the competition to demonstrate to the judges.

Particle Simulation Using RealFlow2012

Open System Showing Separation of Hydrocarbon Layer

Closed System Showing Emulsified Hydrocarbons

Testing and Results

Using the physical models that we made, we were able to conduct experiments to help determine what will make our design most efficient. We received five different belt samples from a belt skimming company (Abanaki), so we conducted three different tests to determine which belt would work best for us. Our tests sought to find the belt that picked up the most oil, least tailing pond material, and least amount of bacteria.

Figure 3: This table represents the belt rankings of three different tests. We tested for the ability of the belts to pick up hydrocarbons, and the abilities of the belts to not pick up bacteria or tailings pond solution. Our five tested belts and a sample of canola oil used for hydrocarbon pick up. From left to right: metallic material, blue texture, fur belt, white plastic, white texture

Additionally, we ran three different twenty-four hour bacterial growth tests in our tank to determine the effectiveness of the agitator and sparger on bacterial growth. The test was conducted with a turbine and a sparger, only a turbine, and only a sparger. At the end of each experiment we measured the optical density of the solution with a spectrophotometer to quantify the bacterial growth. Operating our bioreactor with both a turbine and sparger resulted in slightly greater bacterial growth than just the turbine, which coincides with our hypothesis. The results are displayed below:

Figure 4: This is the spinner flask and sparger system we used for our bacterial growth tests. Each bacterial growth experiment lasted 24 hours in an incubator at 37 degrees Celsius. This is our data for the optical density reading of each bacterial growth experiment. As expected, we had the most growth when both the turbine and sparger were in operation for 24 hours.This image shows NA and Hydrocarbon Separation in a falcon tube after sitting for 5 minutes. As can be seen, a hydrocarbon layer forms on top of the naphthenic acid layer. This was very encouraging data since we want to skim our produced hydrocarbons from the top layer of our bioreactor.

Also, we mixed water, commercial NA’s, and hexadecane (model hydrocarbon) together in a small test tube to determine if we will indeed get a top layer of hydrocarbons like what we need. Indeed, this top layer of hydrocarbons was formed after two minutes of time to allow for separation.

The Final System

Next Steps

The next steps would include developing a feedback and sensing method to monitor the temperature, Ph, and C02 in a highly toxic and corrosive environment. Once the genetically engineered bacterium is produced we can start modeling the bacterial life cycle. Since our bacteria will only produce hydrocarbons within its stationary phase, we would like to look into increasing this portion of the lifecycle and possibly into adding bacteria to the bioreactor when it is in its exponential phase rather than the lag phase. This should reduce the time needed for each reactor cycle. Also, another important aspect we can test after the bacteria are made is the rate of hydrocarbon production by the bacteria.